Hopefully, the one to make them all converge. This new ClutterGrab
represents a handle on a created grab. These are stacked, so grabs
can be overridden and remain inactive until there is a time that
they become active again, although undoing these early is optional.
These grabs are global, they do apply to all pointer, touchpoint
and keyboard foci.
At the moment, only the API to create and stack those is added,
the actual functionality is added in future commits.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2068>
A property for reversing the visible order of children is a bit odd.
It has also been unused by actual gnome-shell code since 2010, and the
somewhat related pack_start()/pack_end() API in GtkBox(Layout) is gone
in GTK4.
With that in mind, turn the property into a no-op and deprecate it,
so that it can be dropped next cycle.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2206>
This ensures they remain perfectly smooth regardless of how the
dispatch time has been adjusted/optimized/delayed/jittered.
Idea by Ivan Molodetskikh <yalterz@gmail.com>
For example, dragging a window on a 60Hz monitor:
BEFORE
delta(time_us) = 17014μs
delta(time_us) = 15998μs
delta(time_us) = 17006μs
delta(time_us) = 16975μs
delta(time_us) = 16001μs
delta(time_us) = 17002μs
delta(time_us) = 17006μs
delta(time_us) = 16004μs
AFTER
delta(time_us) = 16667μs
delta(time_us) = 16667μs
delta(time_us) = 16670μs
delta(time_us) = 16667μs
delta(time_us) = 16669μs
delta(time_us) = 16668μs
delta(time_us) = 16664μs
delta(time_us) = 16674μs
Caveat 1: Because we don't know a "next presentation time" on the first
frame, the interval between the first and second frame will usually be
different to the subsequent steady interval. So this change increases the
jitter of just frame 2, but eliminates jitter thereafter.
Caveat 2: `clutter_frame_clock_schedule_update_now` schedules updates
earlier than `clutter_frame_clock_schedule_update`. This means potentially
you could get multiple frames targeting the same "next presentation time".
That doesn't really change here though - we're dispatching at the same
times as we used to and just giving timelines a better vsync-aligned
timestamp now.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/25
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2161>
This won't change anything for 60Hz displays but higher refresh rate
users will benefit.
Using Nvidia EGLStreams on a 240Hz monitor for example (refresh interval
~4.1ms), the maximum render time allowed before dropping to 120Hz is now
3.6ms whereas it was previously 2.1ms.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2158>
This is notably necessary with transformations, since these don't
trigger allocation machinery, but may affect the actor under the
pointer.
Visible e.g. with GNOME Shell's "Application does not respond"
dialogs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
With Wayland handling all events as they come, this code now just
performs motion compression for events that will be handled by Clutter
widgetry.
The intent to opt tablets and styli out of motion compression was
early and fast client handling, since that is now covered in a generic
manner, this code is superfluous. We don't really need the extra events
for these devices in compositor widgetry either.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
We essentially create those at the time they need to be handled, and
use shortcuts that avoid the event from being queued up. It's too much
of a short cut though, these events are also of interest to the Wayland
event handlers, e.g. to handle pointer state changes (e.g. repicks due
to the pick actor being destroyed) immediately, instead of at the next
event.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
If we are still under the "clear area" of the pick actor, we forget
to update the coordinates. This is usually not needed, unless we
need to repick again for non-event circumstances (e.g. pick actor
is destroyed). This will ensure the right pointer coordinates are
used afterwards in those situations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
Traditionally, the next repaint would also involve picking, which
would correct the actor under the pointer. This now does not happen
out of the box, so we really are waiting for the next pointer event
here.
To avoid the pointer/cursor to lag behind, trigger an immediate
repick here, that will look up the new actor under the pointer
coordinates.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
And resort to it first, unless we are told to ignore the cache
(e.g. after relayouts). This avoids further pick context operations
while the pointer is on the current actor.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
This safe area is the region (in stage coordinates) where the pointer
is ensured to stay within the current actor. This is not used yet, but
will be used for optimizations in pointer picking.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
These may be used for optimizations once we find the pick actor,
so picking can be avoided in areas we know didn't cross into
other actors. Nothing makes use of it yet though, just log these
so far.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
Add a clutter_stage_pick_and_update_device() method that is the only
single entry point for updating a device position as seen by the
stage.
Also, update all callers to use it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
The clutter_stage_get_actor_at_pos() calls it almost 1:1 underneath
and is public API, we can have all callers use this, and stop using
this function outside of clutter-stage.c.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
As event handling goes:
1) Events get generated and queued by the seat (from another thread in
native, in the same thread in X11)
2) The MetaBackend gets those events and forwards them to Clutter
via clutter_do_event()
3) The events get queued in the ClutterStage
4) At the time of processing a frame, the input events are processed,
5) Motion events are throttled, only the last is effectively handled
6) Events are filtered, wayland and WM handling happens here
7) Events maybe reach to clutter
This commit moves 6 to happen between 2 and 3. The end result is that:
- Throttling only applies to Clutter event handling, The wayland event
forwarding bits will handle the event stream as soon as it comes, as
timely as possible.
- WM event handling is also unthrottled, but that's more of a side
effect.
- This all still happens on the main thread, so there's the possibility
that other busy areas (e.g. relayout) temporarily block this event
forwarding.
- Sending events unthrottled inherently means more CPU, probably
dependent on input devices' frequency. The impact is not measured.
This should bring the best of both worlds with e.g. 1000Hz mice, wayland
clients get unthrottled events, while GNOME Shell UI still behaves like
it used to do.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
If we wait till finalize, dispose will destroy the actor hierarchy
and cause untimely repicks. Ensure to free the pointer/touch info
first, so the hooked signal callbacks are gone when destroying the
actors.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1915>
In the case a11y is required, the screen reader is very much
interested in getting an uninterrupted flow of key events. It attempts
so by setting a ::captured-event callback on the ClutterStage, but
that falls short with our MetaDisplay event handler, as clutter events
can be stopped before a11y gets a chance to see them.
This kind of selective amnesia wrt key events is not new, in X11 those
go unheard of by the WM as long as a client is focused and no grabs hold,
so it is clients' responsibility to talk with AT bridge.
This commit doesn't yet change that for X11, but we can do this right
away from the compositor on Wayland, and without any chance to be
tampered by clients.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1328>
If one would end up with an actor attached to mapped actor, where the
attached actor doesn't itself have an up to date stage view list while
listening on the stage for updating, when clearing the stage views of
the list, anything that would query the stage views list at this time
would end up accessing freed memory.
This could happen if
1) An actor was added to a newly created container actor attached to
the stage
2) The actor got a timeline attached to it
3) The actor was moved to a container that already was mapped
4) A hotplug happened
After (1) both the container and actor would not have any stage views.
After (2) the timeline would listen on the stage for stage views
updates. After (3) the actor would still listen on the stage for stage
views updates. When (4) happened, the actor would be signalled when the
stage got its stage view cleared, at which point it would traverse up
its actor's tree finding an appropriate stage view to base its animation
on. The problem here would be that it'd query the already mapped
container and its yet-to-be-cleared stage view list, resulting in
use-after free, resulting in for example the following backtrace:
0) g_type_check_instance_cast ()
1) CLUTTER_STAGE_VIEW ()
2) clutter_actor_pick_frame_clock ()
3) clutter_actor_pick_frame_clock ()
4) update_frame_clock ()
5) on_frame_clock_actor_stage_views_changed ()
6) g_closure_invoke ()
7) signal_emit_unlocked_R ()
8) g_signal_emit_valist ()
9) g_signal_emit ()
10) clear_stage_views_cb ()
11) _clutter_actor_traverse_depth ()
12) _clutter_actor_traverse ()
13) clutter_actor_clear_stage_views_recursive ()
14) clutter_stage_clear_stage_views ()
...
Avoid this issue by making sure that we don't emit 'stage-views-changed'
signals while the actor tree is in an invalid state. While we now end up
traversing tree twice, it doesn't change the Big-O notation. It has not
been measured whether this has any noticible performance impact.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1950
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2025>
This does two things to frown upon:
- Modifies ClutterEvent structs, while the effort is to have those
completely opaque, and readonly after creation from the input
thread side.
- Stores state in the ClutterInputDevice struct, event though those
are also considered static after creation, managed by the input
thread, etc.
Stop doing that. This makes all events just forwarded as-is in
the ClutterStage/clutter-main.c code.
Handling of click count sounds like material for a ClutterGestureAction
(or perhaps ClutterClickAction), all of both callers now do it in place
at the moment, while gestures lack a better state tracking and management.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2024>
This will not try the captured-event shenanigans to emulate grab
behavior, instead relying on event delivery being influenced by
other grab mechanisms.
While at it, improve handling of additional touchpoints by
cancelling the click action right away, as the differences in
event handling make this unwanted behavior surface.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2024>
By default, the pan action performs matrix translations on the
child widget. Nobody wants that (or, nobody wants *just* that).
It's cleaner not to mix mechanism and effect in ClutterGestureAction
subclasses, so drop this base implementation, and change the signal
accumulator so it's more similar to event signals (not that it's
used any longer, anyway).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2024>
This warning is actually dead code, since should_be_mapped and
must_be_realized are always set to the same value, so it does not
make sense to check for "a && !b".
Turn this into an assert so we avoid the dead branch, but do not
remove the variable duplication so the more aptly named variable
is used where it belongs, for clarity.
CID: #1506254
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2061>
It was a feature relevant for when Clutter was an application toolkit
that wanted the application window to communicate a minimum size to the
windowing system.
Now, clutter is part of the windowing system component, so this feature
doesn't make any sense, so remove it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2002>
