Previously Cogl would only call wl_display_flush after doing a swap
buffers on the onscreen because that is the only place where Cogl
itself would end up queueing requests. However since commit
323fe188748 Cogl takes control of calling wl_display_dispatch as well
which effectively makes it very difficult for the application to
handle the Wayland event queue itself. Therefore it needs to rely on
Cogl to do it which means that other parts of the application may also
queue requests that need to be flushed.
This patch tries to copy the display fd handling of window.c in the
Weston example clients. wl_display_flush will always be called in
prepare function for the fd which means it will always be called
before going idle. If flushing the display causes the socket buffer to
become full, it will additionally poll for write on the FD to try
flushing again when it becomes empty.
We also need to call wl_display_dispatch_pending in the prepare
because apparently calling eglSwapBuffers can cause it to read data
from the FD to receive events for a different queue. In that case
there will be events that need to be handled but the FD will no longer
be ready for reading so we won't wake up the main loop any other way.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 962d1825105a87dd8358a765353b77f6af8fe760)
_cogl_poll_rendererer_modify_fd can be used internally to modify the
event mask on an FD to be polled. This will be used in the Wayland
backend to start blocking on write whenever flushing the display fills
the socket's buffer. Modifying the FD's events causes the poll age to
increase.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 8bc0df53ee508687b87e547c1cbac5e8d7d5fc80)
Eventually the Wayland winsys will want to do useful work in its
prepare callback before the main loop goes idle. Previously
cogl_poll_renderer_get_info would stop calling any further prepare
functions if it found one with a zero timeout. That would mean the
Wayland prepare function might not get called before going idle in
some cases. This patch changes it so that it continues to call all of
the prepare functions regardless of the timeout.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 02f7fa538c9d2b383fa0f601177140b571ecf315)
If we don't do this then it might leak connections to the display if
multiple different renderers are tried.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 8e5b4d40a4d960d0d20927d30ee68a37387fe776)
When a primitive is drawn with an attribute that contains texture
coordinates Cogl will fetch the corresponding layer in order to
determine the unit number. However if the pipeline didn't actually
have a layer it would end up redundantly creating it. It's probably
not a good idea to be modifying the pipeline while flushing the
attributes state so this patch makes it pass the no-create flag to the
get_layer function and then skips out enabling the attribute if the
layer didn't already exist.
https://bugzilla.gnome.org/show_bug.cgi?id=702570
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 7507ad1a55a2aeb5beb8c0e3343e1e1f2805ddde)
When a layer is added to a pipeline without setting a texture it ends
up sampling from a default 1x1 texture which is meant to be solid
white. However for some reason we were creating the texture with 0
opacity which is effectively an invalid premultiplied colour. This
would make the blending behave oddly if it was used.
https://bugzilla.gnome.org/show_bug.cgi?id=702570
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 2ffc77565fb6395b986d3274f8bdb6eee6addbf9)
Unlike in GError, the policy in Cogl for when NULL is passed as the
CoglError argument is that the program should abort with a fatal
error. Previously however any errors that were being propagated were
being silently dropped if the application passed NULL. This patch
fixes it to also log a fatal error in that case.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 41e233b4b27de579f77b82115cf43a618bf0c93f)
When determining whether a pipeline needs blending, it was previously
returning TRUE if the pipeline has no snippets, whereas it should be
the other way around because we can't determine the final colour when
there are snipets.
https://bugzilla.gnome.org/show_bug.cgi?id=702570
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 109c815bf747fe027a74f098b4fcb6ea4846a482)
Previously on GLES2 where there is no builtin point size uniform then
we would always add a line to the vertex shader to write to the
builtin point size output because when generating the shader it is not
possible to determine if the pipeline will be used to draw points or
not. This patch changes it so that the default point size is 0.0f
which is documented to have undefined results when drawing points.
That way we can avoid adding the point size code to the shader in that
case. The assumption is that any application that is drawing points
will probably have explicitly set the point size on the pipeline
anyway so it is not a big deal to change the default size from 1.0f.
This adds a new pipeline state flag to track whether the point size is
non-zero. This needs to be its own state because altering it needs to
cause a different shader to be added to the pipeline cache. The state
flags that affect the vertex shader have been changed from a constant
to a runtime function because they will be different depending on
whether there is a builtin point size uniform.
There is also a unit test to ensure that changing the point size does
or doesn't generate a new shader depending on the values.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit b2eba06e16b587acbf5c57944a70ceccecb4f175)
Conflicts:
cogl/cogl-pipeline-private.h
cogl/cogl-pipeline-state-private.h
cogl/cogl-pipeline-state.c
cogl/cogl-pipeline.c
The handler for ConfigureNotify events in the EGL X11 winsys was
incorrectly trying dereference the onscreen pointer even if it didn't
find an onscreen for the X window that has resized. This meant that if
the application has other windows that weren't created by Cogl then it
would crash when handling events for them.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit a0056df61903d74180d4e4caa1046e68396d1be0)
Add register constraints to prevent asm statement complaints like:
{standard input}:382: rdhi, rdlo and rm must all be different
Signed-off-by: Donn Seeley <donn.seeley@windriver.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
There are two asm() statements in cogl-fixed.c that can't be assembled
in Thumb mode. This patch switches it to the generic code in Thumb
mode.
Signed-off-by: Donn Seeley <donn.seeley@windriver.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Previously when trying the three different texture types to create an
automagic texture it would handle the out-of-memory error specially
and bypass trying the remaining texture types. Presumably the idea is
that out-of-memory is a serious error and it can't be recovered from.
However, in the case of atlas textures, this error will be thrown if
the texture is too large to fit into an atlas. In that case it makes
sense to try another texture type so that it can fallback to using a
sliced texture. I think conceptually each different texture type will
have different memory requirements so it seems reasonable to try the
others if there is not enough memory for one of them.
This was causing cogl_texture_new_from_data to break when loading very
large textures because it wouldn't end up slicing them.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ad6968135a01823eb6a94668dd22c7a4df6f9327)
This removes cogl-queue.h and adds a copy of Wayland's embedded list
implementation. The advantage of the Wayland model is that it is much
simpler and so it is easier to follow. It also doesn't require
defining a typedef for every list type.
The downside is that there is only one list type which is a
doubly-linked list where the head has a pointer to both the beginning
and the end. The BSD implementation has many more combinations some of
which we were taking advantage of to reduce the size of critical
structs where we didn't need a pointer to the end of the list.
The corresponding changes to uses of cogl-queue.h are:
• COGL_STAILQ_* was used for onscreen the list of events and dirty
notifications. This makes the size of the CoglContext grow by one
pointer.
• COGL_TAILQ_* was used for fences.
• COGL_LIST_* for CoglClosures. In this case the list head now has an
extra pointer which means CoglOnscreen will grow by the size of
three pointers, but this doesn't seem like a particularly important
struct to optimise for size anyway.
• COGL_LIST_* was used for the list of foreign GLES2 offscreens.
• COGL_TAILQ_* was used for the list of sub stacks in a
CoglMemoryStack.
• COGL_LIST_* was used to track the list of layers that haven't had
code generated yet while generating a fragment shader for a
pipeline.
• COGL_LIST_* was used to track the pipeline hierarchy in CoglNode.
The last part is a bit more controversial because it increases the
size of CoglPipeline and CoglPipelineLayer by one pointer in order to
have the redundant tail pointer for the list head. Normally we try to
be very careful about the size of the CoglPipeline struct. Because
CoglPipeline is slice-allocated, this effectively ends up adding two
pointers to the size because GSlice rounds up to the size of two
pointers.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 13abf613b15f571ba1fcf6d2eb831ffc6fa31324)
Conflicts:
cogl/cogl-context-private.h
cogl/cogl-context.c
cogl/driver/gl/cogl-pipeline-fragend-glsl.c
doc/reference/cogl-2.0-experimental/Makefile.am
Previously CoglPipelineSnippetList was using the BSD embedded list
type with a mini struct to combine the list node with a pointer to the
snippet. This is effectively equivalent to just using a GList so we
might as well do that. This will help if we eventually want to get rid
of cogl-queue.h
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 54a168f3c7829c427d54ab517533bb9f7384d022)
The free function for atlas textures was previously always assuming
that there will be a valid sub_texture pointer but this might not be
the case if the texture was never successfully allocated. This was
causing Cogl to crash if the application tries to make a texture that
can not fit in the atlas using the automagic texture API.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit a7a8b7aefc8cb03fe8b716bee06b3449a7dba85f)
This adds a new function to enable per-vertex point size on a
pipeline. This can be set with
cogl_pipeline_set_per_vertex_point_size(). Once enabled the point size
can be set either by drawing with an attribute named
'cogl_point_size_in' or by writing to the 'cogl_point_size_out'
builtin from a snippet.
There is a feature flag which must be checked for before using
per-vertex point sizes. This will only be set on GL >= 2.0 or on GLES
2.0. GL will only let you set a per-vertex point size from GLSL by
writing to gl_PointSize. This is only available in GL2 and not in the
older GLSL extensions.
The per-vertex point size has its own pipeline state flag so that it
can be part of the state that affects vertex shader generation.
Having to enable the per vertex point size with a separate function is
a bit awkward. Ideally it would work like the color attribute where
you can just set it for every vertex in your primitive with
cogl_pipeline_set_color or set it per-vertex by just using the
attribute. This is harder to get working with the point size because
we need to generate a different vertex shader depending on what
attributes are bound. I think if we wanted to make this work
transparently we would still want to internally have a pipeline
property describing whether the shader was generated with per-vertex
support so that it would work with the shader cache correctly.
Potentially we could make the per-vertex property internal and
automatically make a weak pipeline whenever the attribute is bound.
However we would then also need to automatically detect when an
application is writing to cogl_point_size_out from a snippet.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 8495d9c1c15ce389885a9356d965eabd97758115)
Conflicts:
cogl/cogl-context.c
cogl/cogl-pipeline-private.h
cogl/cogl-pipeline.c
cogl/cogl-private.h
cogl/driver/gl/cogl-pipeline-progend-fixed.c
cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
This ensures we only add a static_breadcrumb pointer to every
CoglPipeline when build with debugging enabled. Since applications may
allocate a lot of pipelines we want to keep the basic size of pipelines
(ignoring optional sparse state) down to a minimum.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 4716312e14bc253cd174a22b3db9d2c9cf031fa1)
This moves the code in test-bitmask into a UNIT_TEST() directly in
cogl-bitmask.c which will now be run as a tests/unit/ test.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 693c85e0cde8a1ffbffc03a5f8fcc1f92e8d0ac7)
Includes fix to build conform tests with -I$(top_builddir)/cogl to
be able to find cogl-gl-header.h
This adds a white-box unit test that verifies that GL_BLEND is disabled
when drawing an opaque rectangle, enabled when drawing a transparent
rectangle and then disabled again when drawing a transparent rectangle
but with a blend string that effectively disables blending.
This shares the test utilities and launcher infrastructure we are using
for conformance tests so we get consistent reporting and so unit tests
will be run against a range of different drivers.
This adds a --enable-unit-tests configure option which is enabled by
default but if disabled will make all UNIT_TESTS() into static inline
functions that we should expect the compiler to discard since they won't
be referenced by anything.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 9047cce06bbf9051ec77e622be2fdbb96ed767a8)
Since _cogl_pipeline_update_blend_enable() can sometimes show up quite
high in profiles; instead of calling
_cogl_pipeline_update_blend_enable() whenever we change pipeline state
that may affect blending we now just set a dirty flag and when we flush
a pipeline we check this dirty flag and lazily calculate whether blender
really needs to be enabled if it's set.
Since it turns out we were too optimistic in assuming most GL drivers
would recognize blending with ADD(src,0) is equivalent to disabling
GL_BLEND we now check this case ourselves so we can always explicitly
disable GL_BLEND if we know we don't need blending.
This introduces the idea of an 'unknown_color_alpha' boolean to the
pipeline flush code which is set whenever we can't guarantee that the
color attribute is opaque. For example this is set whenever a user
specifies a color attribute with 4 components when drawing a primitive.
This boolean needs to be cached along with every pipeline because
pipeline::real_blend_enabled depends on this and so we need to also call
_cogl_pipeline_update_blend_enable() if the status of this changes.
Incidentally with this patch we now no longer ever use
_cogl_pipeline_set_blend_enable() internally. For now the internal api
hasn't been removed though since we might want to consider re-purposing
it as a public api since it will now not conflict with our own internal
state tracking and could provide a more convenient way to disable
blending than setting a blend string.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
_cogl_egl_query_wayland_buffer was using _COGL_RETURN_IF_FAIL but the
function needs to return a CoglBool so it was giving a warning.
(cherry picked from commit d0290eb19fc9bf56fb24f8eab573e19966ea7e1a)
This adds a callback that can be registered with
cogl_onscreen_add_dirty_callback which will get called whenever the
window system determines that the contents of the window is dirty and
needs to be redrawn. Under the two X-based winsys's, this is reported
off the back of the Expose events, under SDL it is reported from
SDL_VIDEOEXPOSE or SDL_WINDOWEVENT_EXPOSED and under Windows from the
WM_PAINT messages. The Wayland winsys doesn't really have the concept
of dirtying the buffer but in order to allow applications to work the
same way on all platforms it will emit the event when the surface is
first shown and whenever it is resized.
There is a private feature flag to specify whether dirty events are
supported. If the winsys does not set this then Cogl will simulate
dirty events by emitting one when the window is first allocated and
when it is resized. The only winsys's that don't set this flag are
things like KMS or the EGL null winsys where there is no windowing
system and showing and hiding the onscreen doesn't really make any
sense. In that case Cogl can assume the buffer will only become dirty
once when it is first allocated.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 85c5a9ba419b2247bd768284c79ee69164a0c098)
Conflicts:
cogl/cogl-private.h
After discussing with Kristian Høgsberg it seems that the semantics of
wl_egl_window_resize is meant to be that if nothing has been drawn to
the framebuffer since the last swap then the resize will take effect
immediately. Cogl was previously always delaying the call to
wl_egl_window_resize until the next swap. That meant that if you
wanted to resize the surface you would have to call
cogl_wayland_onscreen_resize and then redundantly draw a frame at the
old size so that you can swap to get the resize to occur before
drawing again at the right size. Typically an application would decide
to resize at the start of its paint sequence so it should be able to
just resize immediately.
In current Mesa master it seems that there is a bug which means that
it won't actually delay a resize that is done mid-scene and instead it
will just discard what came before. To get consistent behaviour in
Cogl, the code to delay the call to wl_egl_window_resize is still used
if it determines that the buffer is dirty. There is an existing
_cogl_framebuffer_mark_mid_scene call which was being used to track
when the framebuffer becomes dirty since the last clear. This function
is now also used to track a new flag to track whether something has
been drawn since the last swap. It is called ‘mid_scene’ under the
assumption that this may also be useful for other things later.
cogl_framebuffer_clear has been slightly altered to always call
_cogl_framebuffer_mark_mid_scene even if it determines that it doesn't
need to clear because the framebuffer should still be considered to be
in the middle of a scene. Adding a quad to the journal now also begins
the scene.
This also fixes a potential bug where it looks like pending_dx/dy were
never cleared so they would always be accumulated even after the
resize is flushed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 945689a62903990a20abb87a85d2c96eb3985fe7)
In some later patches we want to be able to use the term ‘dirty’ as a
public facing concept which represents expose events from the window
system. In that case the internal concept of dirtying the framebuffer
is confusing, so this patch changes the name to instead mean that
we've doing something which causes the framebuffer to be in the middle
of a frame.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 88eed85b52c29f66659ea112038f3522c9bd864e)
If we delay setting the surface to toplevel until it is shown then
that gives the application an opportunity to avoid calling show so
that it can set its own surface type.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ab59c3a421968d7f159d89ca2f0ba8a9f098cbf6)
Previously the WGL winsys was expecting the application to send all
windows messages to Cogl via the cogl_win32_renderer_handle_event
function. When using a GLib main loop we can make this work
transparently to the application with a GSource for the magic
G_WIN32_MSG_HANDLE file descriptor. That causes the GMainLoop to wake
up whenever a message is available.
This patch makes the WGL winsys add that magic value as a source fd.
This will only have any meaning if the application is using glib, but
it shouldn't matter because the cogl_poll_renderer_get_info function
is documented to only work on Unix-based winsys's anyway.
This patch is an API break because by default Cogl will now start
stealing all of the Windows messages. Something like Clutter that wants to handle
its own event retrieval would now need to call
cogl_win32_renderer_set_event_retrieval_enabled to stop Cogl from
stealing the events.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 99a7f84d7149f24f3e86c5d3562f9f2632ff6df8)
The implementation of cogl_wayland_texture_2d_new_from_buffer now uses
eglQueryWaylandBuffer to query the format of the buffer before trying to
create a texture from the buffer. This makes sure we don't try and
create a texture from YUV buffers for instance that may actually require
multiple textures. We now also report an error when we don't understand
the buffer type or format.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 79252d4e419e2462c5bc89ea4614b40bddc932c5)
This removes the various checks for != COGL_DRIVER_GLES1 when tracking
blend state that was trying to avoid checking the equation or alpha
component factors when they are known to be fixed on gles1. Now we just
rely on the opengl driver to do the right thing for the different
drivers and ignore the differences in the general pipeline state
tracking.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f67c7eaf23e1e2088e9956cb2b66dfdc9abc8b3b)
This enables basic Emscripten support in Cogl via the SDL winsys.
Assuming you have setup an emscripten toolchain you can configure Cogl
like this:
emconfigure ./configure --enable-debug --enable-emscripten
Building the examples will build .html files that can be loaded directly
by a WebGL enabled browser.
Note: at this point the emscripten support has just barely been smoke
tested so it's expected that as we continue to build on this we will
learn about more things we need to change in Cogl to full support this
environment.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a3bc2e7539391b074e697839dfae60b69c37cf10)
The ARB_sync api depends on a GLsync type which may not be available if
GL_ARB_sync isn't defined, such as when building for gles2 only. This
guards the prototypes with #ifdef GL_ARB_sync to fix compilation when a
GLsync type isn't defined.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ba79020e0f5b102e8b25cd831c408dd68d241297)
Fixes 'undefined reference to cogl_error_free' when using g++.
Signed-off-by: Andreas Oberritter <obi@saftware.de>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 41c54fcaba5b4bf76a0e943bac6bca777f3dae2f)
cogl_framebuffer_add_fence creates a synchronisation fence, which will
invoke a user-specified callback when the GPU has finished executing all
commands provided to it up to that point in time.
Support is currently provided for GL 3.x's GL_ARB_sync extension, and
EGL's EGL_KHR_fence_sync (when used with OpenGL ES).
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=691752
(cherry picked from commit e6d37470da9294adc1554c0a8c91aa2af560ed9f)
This adds a _cogl_poll_renderer_add_source() function that we can use
within cogl to hook into the mainloop without necessarily having a file
descriptor to poll. Since the intention is to use this to support
polling for fence completions this also updates the
CoglPollCheckCallback type to take a timeout pointer so sources can
optionally update the timeout that will be passed to poll.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 81c1ce0ffce4e75e08622e20848405987e00b3cc)
If this happens, XRRGetScreenResources will return NULL, so just treat
that like nothing happened.
https://bugzilla.gnome.org/show_bug.cgi?id=699431
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 57a79912ac70080a2f9cbe65181a25b00bf1192a)
This makes sure we include cogl-defines.h in cogl-matrix.h before
checking if COGL_HAS_GYPE_SUPPORT is defined
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit aa5ba324bb3b2ce77be29942f8716d61919cefeb)
This adds api to be able requests a swap_buffers and also pass a list of
damage rectangles that can be passed on to a compositor to enable it to
minimize how much of the screen it needs to recompose.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 0d9684c7b7c2018bb42715c369555330d38514a2)
Instead of driving event dispatching through a per winsys poll_dispatch
vfunc its now possible to associate a check and dispatch function with
each file descriptor that is registered for polling. This means we can
remove the winsys get_dispatch_timeout and poll_dispatch vfuncs and it
also makes it easier for more orthogonal internal components to add file
descriptors for polling to the mainloop.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 627947622df36dd529b9dc60a3ae9e6083532b19)
This adds a _cogl_poll_renderer_add_idle api that can be used internally
for queuing an idle callback without needing to make any assumption
about the system mainloop that is being used. This is now used to avoid
having the _cogl_poll_renderer_dispatch() directly check for all kinds of
events to dispatch, and to avoid having the winsys dispatch vfuncs need
to directly know about CoglContext. This means we can now avoid having a
back reference from CoglRenderer to the CoglContext.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a1e169f18f4257caec58760adccfe4ec09b9805d)
This adds some utility code to help us manage lists of closures
consistently within Cogl. The utilities are from Rig and were originally
written by Neil Roberts.
This adapts the way we track CoglOnscreen resize and frame closures to
use the new utilities.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 2e15fc76eb29bf5932418f7ee80f1fcb2f6a816c)
This updates the cogl_poll_ apis to allow dispatching events before we
have a CoglContext and to also enables pollfd state to be changed in a
more add-hoc way by different Cogl components by replacing the
winsys->get_poll_info with _cogl_poll_renderer_add/remove_fd functions
and a winsys->get_dispatch_timeout vfunc.
One of the intentions here is that applications should be able to run
their mainloop before creating a CoglContext to potentially get events
relating to CoglOutputs.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 667e58c9cb2662aef5f44e580a9eda42dc8d0176)
When adding the frame callback API in 70040166 we decided on a common
idiom for adding callbacks which would return an opaque pointer
representing the closure for the callback. This pointer can then be
used to later remove the callback. The closure can also contain an
optional callback to invoke when the user data parameter is destroyed.
The resize callback didn't work this way and instead had an integer
handle to identify the closure. This patch changes it to work the same
way as the frame callback.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 33164c4b04d253ebe0ff41b12c1e90232c519274)
This adds support for optionally providing a foreign Wayland surface to
a CoglOnscreen before allocation. Setting a foreign surface prevents
Cogl from creating a toplevel Wayland shell surface for the OnScreen.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit e447d9878f3bcfe5fe336d367238383b02879223)
This prevents leaking the Wayland shell surface associated with a Cogl
OnScreen when it is finalised.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 760fc9f3af5475530262b82a55df311fceca358a)
This adds compiler symbol deprecation declarations for old Cogl APIs so
that users can easily see via compiler warning when they are using these
symbols, and also see a hint for what the apis should be replaced with.
So that users of Cogl can manage when to show these warnings this
introduces a scheme borrowed from glib whereby you can declare what
version of the Cogl api you are using:
COGL_VERSION_MIN_REQUIRED can be defined to indicate the oldest Cogl api
that the application wants to use. Cogl will only warn about
deprecations for symbols that were deprecated earlier than this required
version. If this is left undefined then by default Cogl will warn about
all deprecations.
COGL_VERSION_MAX_ALLOWED can be defined to indicate the newest api
that the application uses. If the application uses symbols newer than
this then Cogl will give a warning about that.
This patch removes the need to maintain the COGL_DISABLE_DEPRECATED
guards around deprecated symbols.
This patch fixes a few uses of deprecated symbols in the examples/
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Call wl_display_dispatch on POLLIN. This follows the implementation
in weston/clients/window.c and improves integration of input events,
at least.
Signed-off-by: Andreas Oberritter <obi@saftware.de>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 323fe1887487f19c3e26aa6b7644de31d8d0a532)
https://bugzilla.gnome.org/show_bug.cgi?id=697330
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a7b4930e14add7d955c22f396178b71083dfb52f)
Conflicts:
cogl/Makefile.am
Fixes compilation with C++ compiler.
Signed-off-by: Andreas Oberritter <obi@saftware.de>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 7b3c6dd7f6810f3c8dec62904daa887c917ab7e2)
When a pipeline is added to the cache, a normal copy would previously be
made to use as the key in the hash table. This copy keeps a reference
to the real pipeline which means all of the resources it contains are
retained forever, even if they aren't necessary to generate the hash.
This patch changes it to create a trimmed down copy that only has the
state necessary to generate the hash. A new function called
_cogl_pipeline_deep_copy is added which makes a new pipeline that is
directly a child of the root pipeline. It then copies over the
pertinent state from the original pipeline. The pipeline state is
copied using the existing _cogl_pipeline_copy_differences function.
There was no equivalent function for the layer state so I have added
one.
That way the pipeline key doesn't have the texture data state and it
doesn't hold a reference to the original pipeline so it should be much
cheaper to keep around.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit e27e01c1215e7e7c7c0183ded11dd769bb112c5c)
Calculating the hash value for a pipeline can be a bit expensive.
Previously when adding a new pipeline to the hash table we would end
up calculating the hash value once when checking whether the pipeline
is already in the hash table and then again when adding the pipeline
to the hash table. Ideally GHashTable would provide some API to add an
entry with a precalculated hash value to avoid the recalculation, but
seeing as it doesn't do that we can force it to avoid recalculating by
storing the hash value as part of the struct we are using for the key.
That way the hash func passed to GHashTable can simply return the
precalculated value and we can calculate the hash outside of the
GHashTable calls.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 4a0460a452fd1be382fd5a92d8cfd5e0cdfd4403)
