Previously, the function only returned `TRUE` if the given surface was
equal to the given pointer's focused surface. This changes the behaviour
to also return `TRUE` if any of the given surface's subsurfaces are
equal to the pointer's focused surface.
https://bugzilla.gnome.org/show_bug.cgi?id=781811.
Use the "destroy" MetaWaylandSurface signal instead of the wl_resource
destroy signal for tracking the lifetime of the surface with pointer
focus.
As unsetting the focus may have side effects due to handlers of the
"focus-surface-changed" signal, connect the signal after the default
handler to make sure other clean up facilities have the chance deal with
the surface destruction before we try to unset the focus.
https://bugzilla.gnome.org/show_bug.cgi?id=783113
Let the backend initialize the cursor tracker, and change all call
sites to get the cursor tracker from the backend instead of from the
screen. It wasn't associated with the screen anyway, so the API was
missleading.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
We shouldn't cancel the pointer grab when there is a compositor grab,
since that'd break things like drag-n-drop via the overview and
alt-tabs.
The original reason for cancelling the pointer grab on compositor grabs
was to avoid a re-entry when a compositor grab was activated while
there was an active pointer constraint grab. The re-entry would happen
when the compositor grab cleared the pointer focus. Clearing the focus
would trigger the pointer constraint to be deactivated, which would end
its grab. Ending the grab would reset the grab to the default one, which
could focus the same surface again, triggering the constraint to
re-enable before it finished disabling.
This is now avoided because the default grab handler is now aware of
compositor grabs, and won't override the cleared pointer focus until
the compositor grab ends.
https://bugzilla.gnome.org/show_bug.cgi?id=772914
Teach the default grab about compositor grabs (i.e.
display->event_route) so that it can avoid setting a pointer focus when
after the compositor grab actively unset the pointer focus.
https://bugzilla.gnome.org/show_bug.cgi?id=772914
Previously a grab could suddenly end without the grabber knowing
anything about it. Some grabs assume they won't suddenly end without
notice, and can use then new 'cancel' vfunc to be notified.
Currently a grab is cancelled when a new one is started (i.e. in
meta_wayland_pointer_grab_start()), when a non-popup compositor wide
event route is initiated, and when the seat looses the pointer
capability.
https://bugzilla.gnome.org/show_bug.cgi?id=771858
Instead of using meta_wayland_pointer_end_grab() which focuses the new
grab, add a new helper mean to be used to reset the grab state without
changing the pointer focus. When using this function, the call site is
supposed to explicitly manage focus.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
Make the caller of focus setting check whether there is a pointer to
update the focus state of. It makes it more obvious what to expect, as
the call would be a no-op in when no pointer is present.
Grabbing is still allowed without the presence of a pointer because it
is used by popups even on touch-only systems.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
Previously the focus was reset implicitly by a memset() on the whole
MetaWaylandPointer struct. When MetaWaylandPointer was turned into a
GObject, this was not possible any more, and the focus was not updated
properly.
https://bugzilla.gnome.org/show_bug.cgi?id=771646
Instead of initializing the default grab when the device class is
enabled, initialize it on object initialization. This way other device
classes can still grab the pointer, as if there was one. This may be
useful for example if a touch grab is active and a mouse is connected.
This also makes it possible for popup grabs, which currently use a
pointer grab for controlling, to be triggered by touch devices, while
still holding an active pointer grab.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Make the device <-> seat association permanent, and move it into
MetaWaylandInputDevice. A device will never be disassociated with a
seat, so there is no point in unsetting it.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Add a new object class, MetaWaylandInputDevice, and make all device
classes (pointer, keyboard, touch) inherit it. In the future common
functionality may be placed there.
https://bugzilla.gnome.org/show_bug.cgi?id=771305
Add a signal that is emitted when the pointer focus surface of the
pointer device changes. This will later be used by the pointer
constraints to maybe enable pointer constraints when a surface receives
pointer focus.
https://bugzilla.gnome.org/show_bug.cgi?id=771050
Allow passing parameters (only GObject parameters supported for now) so
that role assignment can affect the paremeters set during construction.
If a role was already assigned when assigning, the passed parameters
are set using g_object_set_valist().
https://bugzilla.gnome.org/show_bug.cgi?id=769936
Move into a standalone meta-wayland-surface-role-cursor.[ch], and
make generic enough to work for pointe and additional (eg. tablet)
cursors.
Most notably, the sprite is now kept completely internal to the
cursor role, and updates are routed through the given
MetaCursorRenderer (which may be the default one for the pointer,
or something else).
The way cursor updates after cursor surface destruction has also
been reworked, the pointer will just keep track of the last cursor
surface, so older surfaces being destroyed don't trigger pointer
rechecks/updates.
Add a bridge between the MetaWaylandPopup object and the corresponding
popup surface role. This bridge replaces communicating dismissed and
unmapped popup events.
https://bugzilla.gnome.org/show_bug.cgi?id=763431
Leave these checks up to the callers, the only uses of this function
(indirect, through meta_wayland_seat_get_grab_info) are
[wl_shell|xdg]_surface.move/resize/show_window_menu.
In move/resize it makes sense to check for a button being pressed, because
we must expect a button release event. However for xdg_surface.show_window_menu
we 1) don't strictly need further events and 2) we must account for press+release
event pairs being processed at once in the compositor before the client sees
the former.
That is eg. the case of touchpad 2nd/3rd button tap emulation, multifinger
taps will emit the event pair at once, so when the client manages to request
xdg_surface.show_window_menu, it'll be too late in the compositor side, so the
request is ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=764519
In order for the native cursor renderer to be able to create a hw
cursor in response to wl_pointer.set_cursor(), keep a private use-count
and reference to the active buffer, stopping it from being released
until it is consumed, replaced, or the surface is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=762828
Each wl_surface.commit with a newly attached buffer should result in
one wl_buffer.release for the attached buffer. For example attaching
the same buffer to two different surfaces must always result in two
wl_buffer.release events being emitted by the server. The client is
responsible for counting the wl_buffer.release events and be sure to
have received as many release events as it has attached and committed
the buffer, before reusing it.
https://bugzilla.gnome.org/show_bug.cgi?id=762828
On the X11 backend we don't track the pointer position in
priv->current_x/y which remain set to zero. That means we never set
the clutter stage cursor if point 0,0 isn't covered by any monitor
since we return early.
Commit 4bebc5e5fa introduced this to
avoid crashing on the prepare-at handlers when the cursor position
doesn't fall inside any monitor area but we can handle that higher up
in the stack. In that case, the sprite's scale doesn't matter since
the cursor won't be shown anyway so we can skip setting it.
https://bugzilla.gnome.org/show_bug.cgi?id=763159
We may have released the wl_buffer already when doing this, which means
we should not try to access the wl_buffer content.
Regarding the cursor texture this is not an issue since we can just use
the texture created in apply_pending_state().
The hw cursor however will only be realized if the surface is already
using the the buffer (surface->using_buffer == true). This will, at the
moment, effectively disable hardware cursors for SHM buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=762828
The x/y coordinates of the ClutterInputDevice were not the ones which was
the result of this event but whatever event was queued the last. The
correct coordinates can, however, be found in the event itself, so lets
use those.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
The wp_pointer_constraints protocol is a protocol which enables clients
to manipulate the behavior of the pointer cursor associated with a seat.
Currently available constraints are locking the pointer to a static
position, and confining the pointer to a given region.
Currently locking is fully implemented, and confining is implemented for
rectangular confinement regions.
What else is lacking is less troublesome semantics for enabling the lock
or confinement; currently the only requirement implemented is that the
window that appears focused is the one that may aquire the lock.
This means that a pointer could be 'stolen' by creating a new window that
receives active focus, or when using focus-follows-mouse, a pointer
passes a window that has requested a lock. This semantics can be changed
and the protocol itself allows any semantics as seems fit.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
Add support for sending relative pointer motion deltas to clients who
request such events by creating wp_relative_pointer objects via
wp_relative_pointer_manager.
This currently implements the unstable version 1 from wayland-protocols.
https://bugzilla.gnome.org/show_bug.cgi?id=744104
As per the spec:
- wl_pointer.axis_source determines the current source of
scroll events.
- wl_pointer.axis_stop determines when there's no further
scroll events on the given axis.
- wl_pointer.axis_discrete is emitted on "wheel"
scroll sources, measured in ticks.
- wl_pointer.frame is meant to coalesce events that logically belong
together, e.g. axis events in this case.
Co-Authored-By: Peter Hutterer <peter.hutterer@who-t.net>
https://bugzilla.gnome.org/show_bug.cgi?id=760637
When running as a native compositor, we can just do that. However, the
previous code must stay for whenever it's run as a X11 client.
Additionally, the fallback switch{} that transforms clutter 1-indexed
buttons into input.h event codes had to be adapted to the change introduced
in clutter commit 83b738c0e, where the 4-7 button range is kept clear for
compatibility with the X11 backend.
https://bugzilla.gnome.org/show_bug.cgi?id=758239
We don't have any way of knowing what the intended size of a XWayland
cursor is supposed to be, so lets do what we do with regular XWayland
surfaces and don't scale them. The result is that cursor sprites of
HiDPI aware X11 clients will show correctly, but non-aware clients may
have tiny cursor sprites.
https://bugzilla.gnome.org/show_bug.cgi?id=755099
This commits refactors cursor handling code and plugs in logic so that
cursor sprites changes appearance as it moves across the screen.
Renderers are adapted to handle the necessary functionality.
The logic for changing the cursor sprite appearance is done outside of
MetaCursorSprite, and actually where depends on what type of cursor it
is. In mutter we now have two types of cursors that may have their
appearance changed:
- Themed cursors (aka root cursors)
- wl_surface cursors
Themed cursors are created by MetaScreen and when created, when
applicable(*), it will extend the cursor via connecting to a signal
which is emitted everytime the cursor is moved. The signal handler will
calculate the expected scale given the monitor it is on and reload the
theme in a correct size when needed.
wl_surface cursors are created when a wl_surface is assigned the
"cursor" role, i.e. when a client calls wl_pointer.set_cursor. A
cursor role object is created which is connected to the cursor object
by the position signal, and will set a correct texture scale given what
monitor the cursor is on and what scale the wl_surface's active buffer
is in. It will also push new buffers to the same to the cursor object
when new ones are committed to the surface.
This commit also makes texture loading lazy, since the renderer doesn't
calculate a rectangle when the cursor position changes.
The native backend is refactored to be triple-buffered; see the comment
in meta-cursor-renderer-native.c for further explanations.
* when we are running as a Wayland compositor
https://bugzilla.gnome.org/show_bug.cgi?id=744932
Make a surface roles into objects with vfuncs for things where there
before was a big switch statement. The declaration and definition
boilerplate is hidden behind C macros.
https://bugzilla.gnome.org/show_bug.cgi?id=744932
Use a better name, use GNOME conventions for error handling, open code the
client error reporting and send the error to the correct resource.
wl_subcompositor doesn't have a role error yet, so continue use some
other error. The only effect of this is error received in the client will
be a bit confusing, it will still be disconnected.
https://bugzilla.gnome.org/show_bug.cgi?id=754215
meta_wayland_pointer_get_client_pointer() may be called when the
MetaWaylandPointer as been already shut down, so the hash table will be
NULL at that moment.
