On the path towards clear ownership chains and always using them to find
other components, do the same for X11 client support paths too.
x11-display: Don't get backend from signleton
x11/selection: Don't get display from singleton
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2718>
The uninitialized fields in this event causes use of uninitialised
data as seen in valgrind:
==71864== Syscall param writev(vector[0]) points to uninitialised byte(s)
==71864== at 0x5026EBD: __writev (writev.c:26)
==71864== by 0x5026EBD: writev (writev.c:24)
==71864== by 0x6482A3B: UnknownInlinedFun (xcb_conn.c:296)
==71864== by 0x6482A3B: _xcb_conn_wait.part.0 (xcb_conn.c:551)
==71864== by 0x6482BAF: UnknownInlinedFun (xcb_out.c:469)
==71864== by 0x6482BAF: _xcb_out_send (xcb_out.c:470)
==71864== by 0x6483DD7: UnknownInlinedFun (xcb_out.c:416)
==71864== by 0x6483DD7: xcb_writev (xcb_out.c:409)
==71864== by 0x53B79B4: _XSend (xcb_io.c:587)
==71864== by 0x53BBF38: _XReply (xcb_io.c:679)
==71864== by 0x53AFFC9: XQueryTree (QuTree.c:47)
==71864== by 0x4982A5F: query_xserver_stack (stack-tracker.c:508)
==71864== by 0x4EA1F5F: g_closure_invoke (gclosure.c:832)
==71864== by 0x4ECFD45: signal_emit_unlocked_R.isra.0 (gsignal.c:3796)
==71864== by 0x4EC0129: g_signal_emit_valist (gsignal.c:3549)
==71864== by 0x4EC03B2: g_signal_emit (gsignal.c:3606)
==71864== Address 0x287d5900 is 32 bytes inside a block of size 16,384 alloc'd
==71864== at 0x4849444: calloc (vg_replace_malloc.c:1340)
==71864== by 0x53A5FE8: XOpenDisplay (OpenDis.c:240)
==71864== by 0x6100E3C: _gdk_x11_display_open (gdkdisplay-x11.c:1565)
==71864== by 0x60CF675: gdk_display_manager_open_display (gdkdisplaymanager.c:462)
==71864== by 0x49D59F1: open_gdk_display (meta-x11-display.c:1041)
==71864== by 0x49D5D64: meta_x11_display_new (meta-x11-display.c:1156)
==71864== by 0x49564AD: meta_display_init_x11_finish (display.c:743)
==71864== by 0x495679D: on_x11_initialized (display.c:818)
==71864== by 0x4D67558: g_task_return_now (gtask.c:1232)
==71864== by 0x4D67782: UnknownInlinedFun (gtask.c:1301)
==71864== by 0x4D67782: g_task_return (gtask.c:1258)
==71864== by 0x495663C: on_xserver_started (display.c:788)
==71864== by 0x4D67558: g_task_return_now (gtask.c:1232)
==71864== Uninitialised value was created by a stack allocation
==71864== at 0x49D4A59: take_manager_selection (meta-x11-display.c:640)
==71864==
To fix this, fully initialize the event struct before sending it.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2535
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2724>
Store the alarms in a different hashtable, and look up the MetaSyncCounter
right away. It so far avoids the MetaWindow middle man, but will also be
simpler when each window can possibly have more than one active alarms.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2175>
Replace the in-process implementation of frames with the external
frames client.
When a client window is created and managed by Mutter, Mutter will
determine whether it is a window that requires decorations and
hint the creation of a frame for it by setting the _MUTTER_NEEDS_FRAME
property on the client window.
After the frames client created a window that has the _MUTTER_FRAME_FOR
property, Mutter will proceed to reparent the client window on the
frame window, and show them as a single unit.
Rendering and event handling on the frame window will be performed by
the external client, Mutter is still responsible for everything else,
namely resizing client and frame window in synchronization, and
managing updates on the MetaWindowActor.
In order to let the frame be managed by the external client, Mutter
needs to change the way some properties are forwarded to the client
and/or frame windows. Some properties are necessary to keep propagating
to the client window only, some others need to happen on the frame
window now, and some others needs to be propagated on both so they
are synchronized about the behavior.
Also, some events that were previously totally unexpected in frame
windows are now susceptible to happen, so must be allowed now.
MetaFrame in src/core/frame.c now acts as the wrapper of foreign
windows created by the frames client, from the Mutter side. Location,
size, and lifetime are still largely in control of Mutter, some
details like visible/invisible borders are obtained from the client
instead (through the _MUTTER_FRAME_EXTENTS and _GTK_FRAME_EXTENTS
properties, respectively).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2175>
Instead of having users of the test client manually deal with alarm
filters, let the test client automatically add itself as filters. This
changes the MetaX11Display a bit, to handle an array of filters instead
of a single filter.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2704>
It exposed unnecessary public and private API, and used a global static
variable instead of a return value, none which was necessary. Remove
both API and use a return value for communicating to the caller.
This doesn't remove a public symbol, lets do that for GNOME 44.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2619>
mutter needs GDK to use the x11 backend. It already calls
gdk_set_allowed_backends ("x11") for this purpose; however, if
GDK_BACKEND=wayland (or any other non-x11 backend possibly) happened to
be in the environment, GDK would fail to initialize at all. This would
result in mutter not registering as X11 window manager, and all X11
clients hanging.
Big thanks to Olivier Fourdan for figuring this out!
v2:
* Restore original value of GDK_BACKEND environment variable after
initializing GDK.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=2022283
Bug: https://bugs.debian.org/1008992
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2496>
In the past, barries were added to the window management X11 display
instance window table, and then special cased when iterating over the
list.
Since then, barriers, which are really part of the backend, has stopped
being added to the window hash table, instead being managed by the
backend. Lets clean up the left-over special casing that is no longer
needed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2442>
Prior to this commit, barriers were created with a MetaDisplay pointer,
despite being entities related and owned by the backend. In the X11
case, it was also not hooked up to the backend X11 connection, but the
clutter one, meaning for example that the logic was active (but dormant)
also for the Xwayland connection.
Fix this by moving X11 barrier management and event processing fully to
the backend. Also replace passing a display pointer with passing a
backend pointer. Keep the display pointer around for a release, but mark
it as deprecated.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2442>
Initializing the event mask, SubstructureRedirectMask in particular,
before taking the manager selection fails with BadAccess. Fix this by
initializing said mask after taking the manager selection.
This fixes `--replace`.
Fixes: eb4307c350
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2432>
With Xwayland on demand, a number of maintenance X11 applications need
to be run first, before Xwayland starts accepting requests from the
normal clients, as soon as the WM_S0 selection is acquired by mutter.
On startup, mutter also sets a number of X11 properties that can be
queried by X11 clients.
Unfortunately, mutter acquires the WM_S0 selection before setting those
properties, so mutter and the first regular X11 client will race on
startup.
As a result, the X11 properties set by mutter on startup may not be
available to the very first X11 client when Xwayland starts.
To avoid that issue, make sure to take the WM_S0 selection last when
opening the display.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2176
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2336>
meta_window_(un)queue() was implemented with global arrays in window.c
that managed MetaLater handle IDs and lists of window queues. In order
to rely less on scattered static variables and making it clearer that
we're dealing with per display window management and not something
specific to a single window, move the window resize/calc-showing queue
management to MetaDisplay.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2264>
We setup Xwayland in an early phase of the X11 display, before we had a
MetaX11Display, and teared down in a couple of places happening when
tearing down the Xwayland integration if the X server died or
terminated. It was a bit hard to follow what happened and when it
happened. Attempt to clean this up a bit, with things being structured
as follows:
* Early during X11 display connection setup, only setup the rudimentary
X11 hooks, being the libX11 error callbacks, and adding the local
user to XHost.
* Move "initialize Xwayland component" code to a new
'x11-display-setup' signal handler. Things setup here are cleaned up
in the 'x11-display-closing' handler.
* Connect to 'x11-display-setup' and 'x11-display-closing' up front,
and stay connected to these two.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1796>
gnome-shell has this hack where it sets the environment variable
"NO_AT_BRIDGE" to "1" before calling meta_init() and then unsets it
after meta_init() returns.
This variable being set to "1" will then cause the ATK bridge in
at-spi2-gtk to fail to load, which GTK then ignores. This is on purpose,
since accessibility is supposed to be done done by GNOME Shell via
Clutter, not via GTK.
The problem is that, now, by default, setting "NO_AT_BRIDGE" to
"1" during meta_init() only has the desired effect on an X11 session,
where we always connect to the X11 server on startup (i.e. during
meta_init()). With Xwayland on-demand, we do not attempt to create the
GDK display during meta_init(), thus this hack falls apart.
Since there are no real altenatives to this hack, just move it to
mutter, which have a better idea when GDK displays are created or not.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1744>
This seems to have been the default in the past, but was (accidentally?) modified
by 8adab0275.
For GNOME 40, we'll be returning to our root with horizontal workspaces, so instead
of overriding it in GNOME Shell side, change the default back to what it once was.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1684>
One for the public channel, and one for the private maintainance
channel. Use the public one for test clients, otherwise tests become
flaky, and the private one for MetaX11Display.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1681>
We ask XLib the next request serial number before performing other actions
triggered by meta_x11_display_set_input_focus_internal() that doesn't use
the request serial anyways. So, just request it before updating the focus
window as that's the operation that needs it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/909
When using DesktopIcons extension and clicking in an icon, gnome-shell
starts an infinite loop caused by the first focus change that may trigger
on X11 a focus in/out event that leads to stage activation/deactivation
which never ends.
This happens because as part of meta_x11_display_set_input_focus_xwindow()
to focus the X11 stage window, we unset the display focus, but this also
causes to request the X11 display to unset the focus since we convolute by
calling meta_x11_display_set_input_focus() with no window, that leads to
focusing the no_focus_window and then a focus-in / focus-out dance that the
shell amplifies in order to give back the focus to the stage.
In order to fix this, mimic what meta_display_set_input_focus() does, but
without updating the X11 display, and so without implicitly calling
meta_x11_display_set_input_focus(), stopping the said convolution and
properly focusing the requested xwindow.
Also ensure that we're not doing this when using an older timestamp, since
this check isn't performed anymore.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/896
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/899https://gitlab.gnome.org/GNOME/mutter/merge_requests/909
In a similar vein to commit 8fd55fef85. This notably failed when setting
the focus on the stage (eg. to redirect key events to Clutter actors).
Deeper in MetaDisplay focus updating machinery, it would check
meta_stage_is_focused() which would still return FALSE at the time it's
called.
This would not typically have side effects, but our "App does not respond"
dialogs see the focus change under their feet, so they try to bring
themselves to focus again. This results in a feedback loop.
Changing the order results in later checks on the X11 POV of the focus
being correct, so focus is not mistakenly stolen from the close dialog,
and it actually succeeds in keeping the key focus.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1607https://gitlab.gnome.org/GNOME/mutter/merge_requests/876
Instead of passing around an X11 Display pointer that is retrieved from
the default Gdk backend, then finding the MetaX11Display from said X11
Display, pass the MetaX11Display directly.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/854
Instead of open coding the X11 focus management in display.c, expose
it as a single function with similar arguments to its MetaDisplay
counterpart. This just means less X11 specifics in display.c.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/751
MetaDisplay and MetaX11Display focus windows are slightly decoupled,
we cannot rely here on the MetaDisplay focus to be updated yet. We
however know the X Window that got focused, so lookup the corresponding
MetaWindow (and client X window) from it.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/751
The end goal is to have all clutter backend code in src/backends. Input
is the larger chunk of it, which is now part of our specific
MutterClutterBackendX11, this extends to device manager, input devices,
tools and keymap.
This was supposed to be nice and incremental, but there's no sane way
to cut this through. As a result of the refactor, a number of private
Clutter functions are now exported for external backends to be possible.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/672
Unmanaging the windows may trigger stack operations that we later try
to synchronize despite being in dispose() stage. This may trigger
MetaStackTracker warnings when trying to apply those operations.
Switching destruction order (First dispose the X11 stack representation,
then unmanage windows) won't trigger further stack changes on X11 windows
after having signaled MetaDisplay::x11-display-closing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/709
In the case mutter is a x11 compositor, it doesn't matter much
since the stack tracker will go away soon. In the case this is a
wayland compositor with mandatory Xwayland, it matters even less
since the session would be shutting down in those paths.
But if this a wayland compositor that can start Xwayland on demand,
this is even harmful, as the MetaStackTracker should be cleared of
x11 windows at this moment, and we actually did right before dispose
on ::x11-display-closing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/709
We need to set XdndAware and XdndProxy on the stage window if running
a X11 compositor, this is not necessary on wayland.
Takes over gnome-shell code doing this initialization.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/667
Starting from commit 7713006f5, during X11 disposition we also unmanage the
windows using the xids hash table values list.
However, this is also populated by the X11 Meta barrier implementation and then
contains both Windows and Barriers.
So when going through the values list, check whether we're handling a window or
a barrier and based on that, unmanage or destroy it.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/624https://gitlab.gnome.org/GNOME/mutter/merge_requests/605
Since commit 956ab4bd made libcanberra mandatory, we never use
the system bell for handling the `audible-bell` setting. So
instead of reacting to settings changes with the exact same call
to XkbChangeEnabledControls(), just call it once when initializing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/598
