The window actor can be mapped every frame, e.g. when it is dragged in
the overview. This commit keeps track when the geometry changed and we
didn't managed to sync the geometry yet and need to sync it at a later
time.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3404>
At the end of the sync_actor_geometry function the window buffer_rect
and the WindowActor position and size are the same and consistent.
Call the virtual method at the end and let the implementations look at
either the buffer_rect or the actor position/size itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3404>
In some cases the window is not mapped when the geometry changes.
Without the mapped window the surfaces are not mapped either and don't
have a sensible allocation.
This patch makes sure we abort syncing the geometry if the window is not
mapped and also make sure we sync geometry when the actor eventually
does get mapped.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3152
Fixes: 8f4ab53bd ("window-actor/wayland: Ensure to use allocation for black background check")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3401>
Scoped traces are less error prone, and they can still be ended
prematurely if needed (this commit makes that work). The only case this
doesn't support is starting a trace inside a scope but ending outside,
but this is pretty unusual, plus we have anchored traces for a limited
variation of that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3396>
Allow only specific files to use those deprecated APIs making
it easier to find where deprecated APIs are still in use
and avoid introducing new usages without being noticed
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3400>
Group all the three config files from clutter/cogl/meta into one
and also remove unnused configurations and replace duplicated ones
This also fixes Cogl usage of HAS_X11/HAS_XLIB to match the expected
build options
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3368>
Currently, json-glib is used for two things:
- For loading scripts, nothing seems to use that in real life other
than some tests
- For debugging paint nodes
For now, the PR drops the first use case and only require json-glib
if it is a debug build
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3354>
We don't actually need the host to be a container, so simply work on
actors saving us a few casts.
This'll simplify dropping ClutterContainer entirely later, and
StViewport/ShellWindowPreviewLayout will also need to be updated for the
new signatures
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3384>
Sticky keys configuration changes reset the pressed modifier state mask,
even though the XKB state might already match with the expected new
state. In those cases we can avoid the XKB state mask update completely.
This also fixes a crash at initialization with sticky keys toggled on,
since configuring the device a11y settings will trigger a XKB state
mask merely reassuring the initial state with no modifiers pressed,
while the connection between the ClutterSeat and the impl object has
not been set up yet. This crash was introduced by commit 00bb4190b
("backends/native: Drop device_native->seat_impl field").
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3392>
Tests that
* the window under the cursor has focus
* focus_default_window won't move the focus away from a previously
focused window even if the cursor is somewhere else
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
When the desktop is focused instead of a window we want to tell the core
about this to handle focus-mode mouse. This is handled by looking for
CLUTTER_LEAVE events where the newly focused window is NULL.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
Take a reference to the window to make sure the MetaFocusData->window
pointer is not pointing to a freed object.
Also make sure that the window that we want to focus is not currently
unmanaging.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
On X meta_window_handle_enter was called when the desktop window was
entered. On wayland the "desktop" is no window anymore. We still want to
inform the core that the desktop is focused, so it can unfocus windows
if focus-mode is mouse.
This commit prepares the core for handling a NULL windows to mean the
desktop.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
The following commits will make it possible to pass a NULL window to
display_handle_window_enter/leave to represent the cursor entering the
desktop. This means it can't be a method of the window class anymore.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
If we have an existing focused window that may have focus, default focus
will leave the focus there. An unmanaging window for example must not
have focus and default focus will continue to select another window in
this case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3258>
The layout manager takes the generic ClutterActor expand/align
properties into account. Everyone should already use those instead
of the custom layout/child properties, so removing them should have
little fallout, while making for a nice cleanup.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3382>
It tests various sub-surface corner cases. It would fail without the
previous fixes.
v2:
* Fix draw_descendant parameter formatting
* Make toplevel window fullscreen (Robert Mader)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
To make sure a new wl_subsurface created for the same wl_surface won't
inherit the position from the wl_subsurface being destroyed.
v2:
* Move into permanently_unmap_subsurface
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
Instead of duplicating the code in both.
v2:
* Rename helper to make it clear(er) that it permanently unmaps the
sub-surface
* Move transaction allocation & commit into the helper
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
wl_subsurface_place_above/below need to hook it up to the parent
surface's pending state, so that it gets picked up next time the parent
is committed.
v2:
* Adapt to wl_subsurface_destructor not resetting sub-surface position
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
This is simpler, and makes sure it's called only once for each surface
in the transaction as committed.
v2:
* Use array for surface states with placement ops (Jonas Ådahl)
v3:
* Use GPtrArray instead of GArray (Robert Mader)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
This is necessary to make sure the unmapped sub-surface is no longer
visible.
v2:
* Use META_IS_WAYLAND_SUBSURFACE (Jonas Ådahl)
* Use same sequence of assignments in both cases
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3364>
meta_display_ping_window() does nothing when check-alive-timeout is set
to 0, but meta_window_check_alive_on_event() was relying on it to reset
the events_during_ping. Without this events_during_ping was just
counting up until the threshold was reached and the window was marked as
not alive, preventing further pointer events from being sent to the
window.
Fix this by not doing anything in meta_window_check_alive_on_event() if
check-alive-timeout is 0, similar to meta_display_ping_window().
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3142
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3367>
Locked modifiers should probably not have an effect on keybindings
while toggled. this is most relevant for modifiers that can be
either/both pressed or locked (e.g. Caps Lock key), if used in
keybindings.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3369>
This struct contains the pressed/latched/locked set of modifiers applying
to the event, and may be filled in by backends generating those events.
Other places where we forward modified key events, state may be normally
obtained from the original event.
Since this constructor is used in a variety of places, this commit
updates them all in one go.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3369>
If multiple sync events are send in the same dispatch, a further call to
wait_for_sync_event will get stuck. Fix this by keeping track of the
latest sync event serial in the display and always compare against that.
This also means sync event sequences must start at 0 and increase by 1.
The wayland-x11 interop test is the only one where that wasn't already
the case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3358>
Currently, we use cairo_region_t despite it being a thing wrapper around pixman_region_32
In order to push for a cairo-less and wayland only build in the future, replace
cairo_region_t with a thin wrapper that is almost a copy of the upstream cairo implementation
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3292>
Whenever a MetaWaylandTestClient exists without success the calling test
will fail. This fixes a bunch of cases where the test would get stuck
waiting for some event from the client when it already died and won't be
able to send the event.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3348>
The test and dist CI jobs run wrap the meson calls in dbus-runner to
avoid setting up dbus servers and mocking services for every test but
the dbus-runner invocation from meson test didn't actually skip all the
setup.
This nested mocking also doesn't work because the system bus is assumed
to be the host system bus and not a mocked one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2618>
This means one can run meta-dbus-runner.py effectively mocking
everything relevant except logind itself, meaning one can run from a TTY
and get permission to mode set etc, while still mocking things like
gsd-color, colord, etc.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2618>
Make CoglBuffer an abstract class and inherit the various Cogl*Buffer types from it.
As none of the subclasses is overriding the vtable functions, they were not turned into
vfuncs but plain function pointers in CoglBuffer.
We still use _cogl_buffer_initialize until we port the various params into actual construct-only
properties, similar to the previous commit for CoglTexture.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3193>
- Make Texture a parent GObject class and move the vtable funcs as vfuncs
instead of an interface as we would like to have dispose free the TextureLoader.
- Make the various texture sub-types inherit from it.
- Make all the sub-types constructors return a CoglTexture instead of their respective
specific type. As most of the times, the used functions accept a CoglTexture,
like all the GTK widgets constructors returning GtkWidget.
- Fix up the basics of gi-docgen for all these types.
- Remove CoglPrimitiveTexture as it is useless: It is just a texture underhood.
- Remove CoglMetaTexture: for the exact same reason as above.
- Switch various memory management functions to use g_ variant instead of the cogl_ one
Note we would still want to get rid of the _cogl_texture_init which is something
for the next commit
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3193>
The helper doesn't do anything that makes it worth
to be exposed as public API. End-users, such as GNOME Shell could have
an in-tree helper if they end up using it that much.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3086>
The shell might raise and make windows recent for another workspace when
an app gets activated on another workspace. Making the windows only
recent on the current workspace thus results in inconsistent focus when
another window of the same app is closed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3315>
There are existing extensions that implement desktop icons as
a combination of a GTK program and a small extension to make
the wayland window behave as if it was of type DESKTOP on X11.
That's quite painful, as it requires reimplementing WM behavior
that is already implemented in mutter itself (stacking, stickiness,
skip-taskbar, ...), as well as modifying gnome-shell to consider
the window in addition to "real" DESKTOP windows (workspace-switch
animations, ctrl-alt-tab, ...).
In addition to that, other extensions may also have special handling
of DESKTOP windows, and their code cannot easily be monkey-patched
to handle "alternative" desktop icons.
This whole game of whack-a-mole can easily be avoided by allowing
desktop-icons extensions to mark their desktop windows as DESKTOP,
so do just that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3305>
Assigning the corresponding stack layer of DESKTOP windows is
currently X11 specific, because there is no way for wayland
clients to set the DESKTOP window type.
This is about to change, so move the code to the generic layer
handling.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3305>
Change the order of events to adhere to the Wayland specification for
wl_keyboard.enter, which mandates:
> The compositor must send the wl_keyboard.modifiers event after
> this event.
Mutter currently sends the modifiers event before the enter event,
which may break applications that require information about the focused
surface in order to properly handle the modifiers.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2231
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3341>
These functions ends-up calling gdk-pixbuf for loading textures/bitmaps
from a file and they don't seem to be used anywhere.
These changes are only useful with the following up commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3097>
Create a fake monitor region right of the right-most monitor and if a
horizontal barrier extends into that region, fail the barrier. Barriers
are aligned on the top/left edge of the pixel so the most natural
barrier of (e.g. 0-1024) is also wrong - it's one pixel into the next
monitor.
Check this for nonexisting screens on the right too to avoid clients
suddenly failing when multiple monitors are present.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3319>
Assuming two 1920x1080 screens next to each other: a horizontal barrier
starting at 1920 going east is always outside the left screen.
Assuming two 1920x1080 screens on top of each other: a vertical barrier
starting at 1080 going south is always outside the top screen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3319>
When running headless, only the invalid modifiers are advertised.
That breaks with the NVIDIA proprietary driver which then rejects the
buffers created with the invalid modifier, and that kills Xwayland,
meaning that running Xwayland on top of a mutter based compositor
headless is not possible.
The reason the modifiers are not sent is because AddFb2 is not supported
when running headless.
Other compositors (weston, wlroots) would still send the modifiers even
without AddFb2, and Xwayland works fine on those compositors when
running headless.
Remove the requirement for AddFb2 to send the modifiers, so that
Xwayland can work fine on top of mutter headless with the NVIDIA
proprietary driver.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3060
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3320>
`clutter_actor_destroy()` queues a stage update. Under certain
circumstances - i.e. when run in a very slow container - this can race
with the stage update triggered by the following
`clutter_virtual_input_device_notify_button()`, occasionally resulting in
`wait_stage_updated()` to return before the
`on_event_return_propagate()` callbacks ran, making the test fail.
This notably became more common since
8f27ebf87e (clutter/frame-clock: Start next update ASAP after idle period)
landed.
Thus wait for a stage update to happen after `clutter_actor_destroy()`,
preventing the race.
Fixes: f6da583d06 (tests/clutter/event-delivery: Add tests for implicit grabbing)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3332>
Instead of g_get_monotonic_time. This makes sure last_presentation_time_us
advances by refresh_interval_us.
Doesn't affect test results at this point, but it will with the next
commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3174>
Certain kernel drivers can take an unreasonably long time to
complete mode setting operations. That excessive CPU time is charged
to the process's rlimits which can lead to the process getting killed
if the thread is a real-time thread.
This commit inhibits real-time scheduling around mode setting
commits, since those commits are the ones currently presenting as
excessively slow.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3037
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3324>
At the moment if a thread is made real-time there's no going back,
it stays real-time for the duration of its life.
That's suboptimal because real-time threads are expected by RTKit to
have an rlimit on their CPU time and certain GPU drivers in the kernel
can exceed that CPU time during certain operations like DPMS off.
This commit adds two new ref counted functions:
meta_thread_{un,}inhibit_realtime_in_impl
that allow turning a thread real-time or normally scheduled. At the same
time, this commit stores the RTKit proxy as private data on the thread
so that it can be reused by the above apis.
A subsequent commit will use the new APIs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3324>
Most of the code writes "real-time" as "realtime" not "real_time".
The only exception is one function `request_real_time_scheduling`.
This commit changes that function for consistency.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3324>
If we queued a mode set, but didn't end up compositing all frames, we'll
have pending mode sets in a hash table waiting to be applied. If we
before all monitors again try to reconfigure things we should drop the
old pending mode sets and start fresh.
We already do this when we're doing so when generating views, but when
just unsetting modes, we didn't, so fix that.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=2242612
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3318>
We had a function called "reset_modes()" on MetaRendererNative, but what
it expected to do was to unset all modes on all CRTCs. Despite this, it
had code to unset modes on unconfigured CRTCs, probably because it was
used for multiple things in the past.
Make this a bit easier to follow by renaming the function
"unset_modes()" and fold the function doing the unsetting into the
function itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3318>
Intel has started to advertise big gamma LUT sizes on some hardware
because the hardware supports segmented LUTs. This means they have a lot
more precision at certain segments then others. The uAPI can't expose
this functionality meaningfully so they chose to expose a huge number of
TAPs to sample from to their segmented LUT.
This increase in uAPI LUT size resulted in stack overflows because we
allocated the LUT on the stack. This commit moves it to the heap
instead.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3064
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3322>
1. Centralize stride calculation in one function.
2. For dmabufs query the stride instead of assuming a certain value.
3. For system memory buffers use the pixel format to calculate the
stride.
4. Stop negotiating `SPA_PARAM_BUFFERS_size` and
`SPA_PARAM_BUFFERS_stride`.
2. fixes an actual bug where we reported wrong max buffer sizes,
resulting in crashes in Gstreamer when doing area screencasts on AMD
GPUs.
The reasoning for 4. is that the values were possibly wrong for
dmabufs as the negotiation happens before we create any buffers.
Further more neither Mutter nor the common consumers required it.
The later either ignore the values (OBS), always accept (gstpipewiresrc)
them or calculate the exact same possibly wrong values (libwebrtc).
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6747
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3311>
With EI support wired to XTEST, and oeffis being enabled in Xwayland
means that XTEST will always go through the XDG portal.
While this the intended behavior for the general use case of Xwayland
running rootless on a desktop compositor, that breaks when Xwayland is
running on a nested compositor, because the portal is for the entire
session and not limited to the nested Wayland compositor.
Enable XDG portal support in Xwayland only when we managed to connect
to the GNOME session manager, which means we are running in a full
desktop session, and not in any form of nested mode.
This is determined by simply using the status returned by set_gnome_env()
which will fail if not connected to a GNOME Session manager.
See-also: https://gitlab.freedesktop.org/xorg/xserver/-/issues/1586
See-also: https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/1170
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3047
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3303>
The function set_gnome_env() is used to pass environment variables
though DBus using the "org.gnome.SessionManager".
If that fails, it means we are not running in a full environment, which
might be useful to determine whether Xwayland should enable the portal
support.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3303>
This makes sure the new update takes effect over the pending update for
any common properties. It matches the other users of
meta_kms_update_merge_from.
Fixes: 27ed069766 ("kms/impl-device: Add deadline based KMS commit scheduling")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3316>
When a configuration has a fractional scale, but we're using a physical
monitor layout, we can't use the scale, but if we do, we end up with
wierd issues down the line. Just discard the config if we run into this.
Eventually we probably want to store the layout mode in the
configuration so we can handle more seamless switching between physical
and logical layout mode, but first do this.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3057
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3299>
The surface actors may not have a valid allocation when running the
test. The preferred height, which `clutter_actor_get_size()` returns
in that case, can be wrong in certain cases, making us not add the black
background when it's actually needed.
Query the allocation instead, even at the expense of additional
relayouts.
While on it, sneak it some small cleanups.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3024
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3310>
There's two aspects from its documentation
(https://xkbcommon.org/doc/current/group__state.html#gae56031a8c1d48e7802da32f5f39f5738)
affecting us here:
1. "This function is similar to xkb_state_key_get_syms(), but intended for
users which cannot or do not want to handle the case where multiple
keysyms are returned (in which case this function is preferred)."
We are indeed in that field, and have been for a long time.
2. "This function performs Capitalization Keysym Transformations."
This is unlike the xkb_key_get_syms() function that we use, and
convenient here for parity with X11 since it behaves exactly that
way.
Fixes cases where the keysym for some keys is not properly capitalized
when caps lock is toggled, due to the output of capslock+key being
different from shift+key. An example of this is 'é' in french(azerty)
layout (bound to the '2' key). Even though shift+2 outputs '2',
capslock+é should output 'É'.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3058
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3306>
This is similar, but reserved for the crossing events induced by the
input shape changes on our overlay window. The mechanism in the previous
commit does again protect against this, so this mechanism may go away.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3267>
Focus follows mouse is meant to avoid focusing windows that happened
to pop up under the pointer, e.g. due to mapping, workspace changes,
etc... On X11, this has been done since ancient times through a
moderately complex synchronization mechanism, so mutter would know
to ignore crossing events caused on those situations.
This mechanism is much prior to XInput 2 though, where we may know
this in a more straightforward way: If the sourceid of the crossing
event is a logical pointer (i.e. equals deviceid), the crossing event
was triggered logically, and not through user input.
Perform this simpler check, and drop the existing mechanism to
ignore logically induced crossing events.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3267>
The virtual stream source with CURSOR_MODE_EMBEDDED uses
META_STAGE_WATCH_AFTER_PAINT as the callback for recording its frame. In
this stage of the paint though, there is no ClutterPaintContext anymore
(there only is a paint context during the paint, not afterwards).
The callback (actors_painted()) tries to get the redraw clip from the paint
context, and we end up with a NULL pointer crash.
We actually do still have a redraw clip at this point, so because everyone
uses the paint context to get the redraw clip anyway, just pass the redraw
clip to the stage watches directly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3283>
After an event has been handled such that it bypasses both Clutter and
Wayland, e.g. when handling a keybinding, bypass_clutter would get
unset in the presence of a wayland grab. This means that the event is
handled both as a keybinding and by Clutter.
In the case of switcher popups in gnome-shell in the presence of a gtk4
autohide popover this meant that instead of selecting the next element,
it would select the one after that. If there are only two elements, as
is common with input sources, this would mean going back to the current
one, preventing switching them with a single press of the keybinding.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6738
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3054>
When a device is added, libei does not allow adding additional regions
for that particular device, as it is already advertised to the EI
client.
As a result, mutter currently effectively only adds the first region to
a device, but not the others.
This makes input in multi monitor sessions only possible on one monitor,
as the EI client cannot look up the other regions, since they were not
advertised to it.
Fix this situation by not adding and resuming the device, when a shared
device is used.
Instead, for shared devices, always add all regions first, and then
after that, add and resume the device.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3273>
Use the previously added API to release acquired mapping ids, when the
corresponding stream is destroyed.
Otherwise, the remote desktop session would maintain a whole bunch of
unused mapping ids, as their corresponding streams are already
destroyed, but maybe not the session.
Such situation would be a remote multimonitor session, where the amount
of used virtual monitors changes multiple times during the session.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3273>
The remote desktop session currently provides a mechanism to acquire
mapping ids.
However, when they are not used anymore, they currently cannot be
removed and thus just linger around.
So, add an API to release these acquired ids.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3273>
Avoid passing the MetaSeatImpl, since it may be potentially null at
MetaSeatNative construction time. An example of this triggering issues
are mousekeys, since those work on an emulated pointer device created
indirectly after a keyboard device is added (and the right settings are
enabled) at a time that the MetaSeatImpl is still being created, so the
MetaSeatNative cannot yet have a reference to it.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2869
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3278>
These objects already have a pointer to the ClutterSeat that has a
pointer to the MetaSeatImpl in its native implementation. This data
may be considered pretty much immutable (a pointer to the seat is
held, and the native implementation will shut down the implementation
thread within ClutterSeat finalization.
Avoids some awkward code, since the MetaInputDeviceNative needs to
be aware of the Clutter object implementation and the implementation
object.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3278>
vc4's implementation of `drmModeAtomicCommit` seems to require a few
milliseconds advanced notice or else it will miss the frame deadline.
That's too high for our deadline evasion threshold which is measured
in microseconds. Let's stop trying to use deadline timers on vc4 to
avoid this conflict without having to disable atomic KMS.
Suggested-by: Jonas Ådahl <jadahl@gmail.com>
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2953
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3279>
It's the 10 bit equivalent to NV12 and uses the same layout as P016, i.e.
16 bit components with the lowest 6 bits set to 0 (padding), allowing us
to use 16 bit "subformats".
Thus adding support is quite trivial as we can reuse the NV12 shader.
The format is widely supported in decoding and display hardware (on Intel
since Kaby Lake), as well as modern codecs (AV1, VP9, HEVC) and has
visible quality advantages over NV12.
Note that the additional colors are lost if composited to a 8 bit RGB
framebuffer. Switching between direct scanout and compositing can thus
cause quality differences. This is no new phenomena, however, as the
same is the case already for e.g. GL clients using 10 bit formats -
including video players.
Also note that P012 and P016 could trivially added as well - it's not
done here as they are uncommen and thus hard to test.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3244>
These shaders can be used for similar formats with other component
sizes since the values are represented as floats. So whether the source
value was stored in 8bit, 10bit or 16bit doesn't matter - the driver
will covert it for us.
Thus use a Weston-inspired, more general naming scheme.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3244>
They are needed as "subformats" for higher bit YCbCr formats, such as
P010, and we don't plan to use or expose them otherwise. Thus don't
implement any conversion or packing features.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3244>
Realizing a cursor will assume view related state objects are valid so
they can mark them as dirty. This assumption broke when there were a
scale changed that happened with multiple CRTCs, as we'd create view
object by view object as we realized the texture. Realizing the texture
would trigger a signal that had the handler assuming the validity of all
view objects, but if we only had gotten to the first, the second view
would not be there yet, thus we'd be doing a NULL pointer dereference.
Creating the view objects first, then handling the updating avoids this
problem by making the already done assumption valid on hotplugs.
The test case added tests exactly this series of events, and uses a
virtual monitor as a cheap trick to make the KMS CRTC based view the
first one, and an arbitrary view the second that previously had its view
object initialized too late.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3012
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3262>
The cursor surface is decided by the "current" surface; if that alone
changed (e.g. current surface was destroyed), we didn't update the
cursor, meaning it either got stuck, or got hidden if the client exited
completely.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3262>
It's hard to tell why turning on HDR mode failed without these log
messages. It could be missing support in the sink (EDID/DisplayID) or
missing support in the driver/display hardware (connector properties) or
just a failure turning it on.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3251>
When the actor gets a new "main" surface assigned, it adds the
new surface to the stack of surface actors, but forgets to remove
the old one.
This stale pointer in the array may cause invalid reads and crashes
after the assigned surface is disposed, e.g. when destroying the
MetaWindowActor tries to disconnect signals from all accounted
surface actors.
Fixes: 9a2c8b2592 ("window: Add suspend state")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3252>
Commit 3bfcb6d1 fixed the check for tiling via keybindings, but
ignored a subtle edge case when tiling with the pointer: The
monitor used for tiling is the monitor with the pointer, which
is not necessarily the one that contains the largest part of the
window.
That is, the correct monitor to check against depends on the
context where the function is called. We can either figure
it out automatically via the current window drag, or make it
a parameter.
The latter is clearer, because the callers already decide which
monitor to use for tiling anyway.
Fixes: 3bfcb6d1b9 ("window: Fix portrait orientation check for tiling")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3248>
These snippets are retrieved anew every time a window is resized. But
callers never modify them, they're effectively read-only so cache them
at the place of creation.
This is required to convince the pipeline hash that each reuse of the
same snippet really is the same snippet and so the pipeline is unchanged.
`CoglPipelineSnippetList` only does shallow comparisons and there's no
need right now to reimplement it as a deep comparison.
This eliminates the log message:
> Over 50 separate %s have been generated which is very unusual,
> so something is probably wrong!
which isn't actually a leak but more a warning about wasting time.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6958
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3224>
GInitable initialization is failable, currently, it may fail before error
traps are initialized, but error traps would be invariably deinitialized on
finalize() of the failed object. This results in an assert hit, on top of the
original failure to initialize the backend.
The libX11 error handlers are a pure client-side construct, and not a server
request, they just need XInitThreads() called to set up the library-side locks
protecting access to the global variable. This is done beforehand already at
meta_backend_x11_init(), so initialize the error traps around that time too.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3242>
Commit 9c3b130f67 changed slightly destruction order to handle use-after-free
situations, but missed a small new one introduced by the order change: The
MetaX11Display may schedule callbacks through MetaLaters, which depend on the
MetaCompositor, which is now freed before the MetaX11Display.
Since there is no winning move here, make the MetaX11Display aware of this
by avoiding to remove the callback if the MetaCompositor is already gone.
The MetaLaters infrastructure is already fully freed at this point (incl. the
data it contained), so this shouldn't be a leak.
Fixes: 9c3b130f67 ("display: Fix destruction order")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3247>
Use work area from the monitor that the window is currently on to
determine if tiling should be allowed.
Window tiling is disabled for monitors with portrait orientation, but
the work area we use to detect portrait orientation is taken from the
monitor that currently has the mouse pointer.
This works fine for edge tiling using the mouse, but this is broken when
using keybindings for window tiling because your mouse pointer could be
on a different monitor that has horizontal orientation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3199>
While adjusting the monitor layout of my docked laptop, mutter got a
segfault while attempting to dereference the frame_info struct. This
happened on gnome-shell 44.4-1.fc38.
cogl_onscreen_peek_head_frame_info() just forwards the call to
g_queue_peek_head() which returns NULL in the event that the queue is
empty. If finish_frame_result_feedback() is expected to always be called
with a non-empty queue there's still a bug somewhere, but regardless
this API can legitimately return NULL so it should be checked for prior
to dereferencing.
Fixes: 61801a713a ("onscreen/native: Avoid freezing the frame clock on failed cursor commits")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3229>
If we are making an update that only disables CRTCs, we would not
actually post it, but just drop it then post nothing, as it wasn't ever
added to the mode set update hash table. This resulted in hotplugs where
we loose the all the connectors we had, where we want to disable all
CRTCs and enable nothing, to fail to disable said CRTCs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3073>
This removes the implicit dependency on `display->stack_tracker`
existing and being valid in `on_stack_changed()` because
now it is the stack-tracker's responsibility to subscribe
to the "changed" signal of the stack and handle the changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3202>
The _NET_WM protocol, written before the birth of XInput 2.x, does have
no notion of different input devices whatsoever. Anyways, in a X11 session
it is safe to assume this refers about the Virtual Core Pointer since
every input device by default drives it (incl. touchscreens through the
"pointer emulating sequence", and styli).
This assumption falls apart in a Wayland session with non-pointer input,
since we do actually distinguish between all the distinct pointer devices
and touchpoints, and do not let them emulate mouse input.
We do need to specify a device/sequence there to drive the window
move/resize operation. The _NET_WM_MOVERESIZE message just gives us the
x/y root coordinates the resize was started from, so work from there
into guessing what is the most likely device/sequence that did trigger
the request on the client side.
Conversely, on Wayland we do not need to check for possible race
conditions in the pressed button states since we have larger guarantees
about not missing these events if we checked for the button modifier
mask beforehand, so make that race condition check specific to the
X11 sessions.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2836
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3059>
There can be events which don't not have source devices set on them, because
they are not backed by real hardware and rather generated by us, for example
IM events coming from the shell's OSK.
So don't assume all events have a source device in
update_pointer_visibility_from_event() and rather ignore those without one,
as we are only interested in events coming from "real hardware" here.
This fixes an issue where the mouse pointer would appear on devices without
any input from actual mice/touchpads on OSK key presses.
Fixes: 6aa42d6dad
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3236>
When we call get_grab_info() to get the sequence, device and coordinates for
a touch window drag, as the device we use the device from the
MetaWaylandPointer, assuming that it's set to the core pointer.
In the case where there is no pointer device present on the seat (so no
mouse nor touchpad), the wayland pointer remains disabled though, and
pointer->device is NULL.
This means touch window dragging on hardware without pointer devices
present is broken (because MetaWindowDrag assumes that there's a valid
device passed in meta_window_drag_begin()). Fix it by taking the core
pointer directly from ClutterSeat instead of going the extra detour through
MetaWaylandPointer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3238>
If meta_eis_viewport_get_position() returned FALSE, the variable
'has_position' would be initialized. This variable represents
exactly the return value of meta_eis_viewport_get_position(),
so just assign it to the variable directly.
Spotted by Coverity.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3237>
CLUTTER_SCROLL_SOURCE_UNKNOWN only generates continuous scroll events
and no discrete scroll events.
As a result, scrolling only works in applications, that support high
resolution scroll wheels, like GTK4 applications.
GTK3 applications, on the other hand, don't support high resolution
scroll wheel events, and such scrolling does not work in these
applications.
Fix this issue by using the scroll source CLUTTER_SCROLL_SOURCE_WHEEL.
Since commit 92a90774a4 ([0]),
CLUTTER_SCROLL_SOURCE_WHEEL generates discrete events to ensure that
scrolling in legacy applications still works.
[0]: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2664
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3235>
We need to trigger a mode set when power-save changes to 'on' if it's
purely about power saving, but when they arrive as part of a hotplug
event, we'll handle all that later, in the monitors-changed handling,
that contains the new configuration.
This avoids a crash that happens due to the mode set being queued on now
disabled connectors.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2985
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3233>
We can change power save mode for two reasons: gsd-power told us to, or
we saw a hotplug event. Sometimes it's useful to be able to make the
distinction to why a power save mode changed, so add a reason to the
signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3233>
If the deadline timer is disabled (like on nvidia-drm or when
`MUTTER_DEBUG_KMS_THREAD_TYPE=user`), then we need to call
`meta_kms_device_set_needs_flush` on every cursor movement. But some were
getting skipped if they coincided with page flips, which resulted in some
cursor movements failing to schedule the frame clock. This resulted in
unnecessary levels of frame skips when using lower frequency input devices
which are less likely to provide another event within the same frame period.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3002
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3210>
Add a pair of calls to ensure the error trap infrastructure
survives for the MetaBackend. This will help on later commits that
largely operate on the MetaBackendX11 Display.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3230>
Keep a per-display list of error traps, so we don't mix them
together, and possibly deem unintended error traps outdated.
This means init/deinit calls are now stackable, and need to
happen evenly. In order to honor this, move the MetaX11Display
error trap destrution to finalize.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3230>
This forces not using the seat_proxy. But still allows the use of
session_proxy.
On tests, headless mode is explicitly set and it might not be available a
systemd session. To avoid test failing on this situation skip using
meta_launcher wich uses session_proxy and seat_proxy.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3093>
If we're a input-only remote desktop session, create libei regions on an
absolute pointer device corresponding to all logical monitors. This
allows absolute pointer motions without screen casting.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
Sometimes it makes no sense to have a shared pointer device, for example
when they have no set region occupying the global stage coordinate
space. This applies to for example window screen cast based pointer
device regions - they are always local to the window, and have no
position.
We do need shared absolute devices in some cases though, primarily
multi-head remote desktop, where it must be possible to keep a button
reliably pressed when crossing monitors that have their own
corresponding regions.
To handle this, outsource all this policy to the one who drives the
emulated input devices. Remote desktop sessions where the screen casts
correspond to specific monitors (physical or virtual), we need to make
sure they map to the stage coordinate space, while for window screencast
or area screencasts, we create standalone absolute pointer devices with
a single region each.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
We already have the remote desktop session ID, and we'll soon need the
actual remote desktop session in the screen cast session, so pass it on
construction.
The old screen cast type is set implicitly instead.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
A MetaEisViewport represents an absolute region backend by e.g. a
pointer device. There are two kinds: a standalone viewport, which
corresponds to a viewport that has no neighbours, and a non-standalone,
which represents a region of a global coordinate space.
The reason for having non-standalone viewports is to allow to mirror the
logical monitor layout of a desktop, while the standalone are meant to
represent things that are not part of the logical monitor layout.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
How EIS will be used depends on its context, meaning we'll have multiple
EIS contexts that expose different things. To prepare for this remove
the global socket since that won't work with multiple contexts.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3228>
This fixes a compiler warning:
```
src/x11/events.c:523:1: warning: ‘get_event_name’ defined but not used [-Wunused-function]
523 | get_event_name (MetaX11Display *x11_display,
| ^~~~~~~~~~~~~~
```
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3223>
This used to be the behavior, until commit 5d35138df0 changed the meaning
of the return value of MetaCursorRendererClass::update_cursor(). This
made the user of pure-overlay cursors (singular, MetaWaylandTabletTool)
miss their overlays.
Change the return value, so that it matches the desired behavior of
a backend-less overlay-only cursor renderer.
Fixes: 5d35138df0 ("cursor-renderer: Make 'handled_by_backend' state 'needs_overlay'")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3218>
We react on changes to has_hw_cursor, but always try to inhibit if
there is no cursor sprite. While this looks like a reasonable optimization
with the typical situation of one cursor renderer, it may fall into
inhibiting twice without knowing to unwind, e.g.:
1. has_hw_cursor: TRUE, cursor_sprite: !=NULL -> inhibit
2. has_hw_cursor: FALSE, cursor_sprite: NULL -> inhibit
3. has_hw_cursor: TRUE, cursor_sprite: !=NULL -> uninhibit, but once
And this may also result in the CLUTTER_PAINT_FLAG_NO_CURSORS flag
staying on for Tablet cursors, that (so far) always use overlay paths.
This results in invisible tablet cursors after using the mouse at
least once.
Fixes: e52641c4b6 ("cursor-renderer/native: Replace HW cursor with KMS cursor manager")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3218>
Under strange timings, the GTK frames client may implicitly queue
relayouts that end up disagreeing with the latest frame size as
given by Mutter, this results in GTK calling XResizeWindow, and
Mutter plain out ignoring the resulting XConfigureRequestEvent
received.
This however makes GTK think there's pending resize operations,
so at the next resize it will freeze the window, until enough
resizes happened to thaw it again. This is seen as temporary
loss of frame-sync ness (e.g. frozen frame, and other weird
behavior).
In order to make GTK happy and balanced, reply to this
XConfigureRequest, even if just to ignore it in a more polite
way (we simply re-apply the size Mutter thinks the frame should
have, not GTK), this results in the right amount of
ConfigureNotify received on the frames client side, and the
surface to be thawed more timely, while enforcing the size as
managed by Mutter.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2837
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3189>
This is meant for compatibility purposes with the shell extensions
avoiding to break a bunch of them in the last minute and we would
drop it in the GNOME 46 release.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3128>
Currently, Meta/Cogl/Clutter makes use of cairo_rectangle_int_t despite
the existance of MetaRectangle.
In order to make MetaRectangle usable in Cogl/Clutter as well, Mtk would
provide such base types that are shared across the various private
libraries
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3128>
Dropped obsolete Free Software Foundation address pointing
to the FSF website instead as suggested by
https://www.gnu.org/licenses/gpl-howto.html
keeping intact the important part of the historical notice
as requested by the license.
Resolving rpmlint reported issue E: incorrect-fsf-address.
Signed-off-by: Sandro Bonazzola <sbonazzo@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3155>
This used to be the case before the refactor at commit 43cee4b6b6,
use_clipped_redraw would be unset before the larger check if has_buffer_age
was set, but clutter_damage_history_is_age_valid() was FALSE. This got
replaced by a check just on the latter, which will also be FALSE if
has_buffer_age is not present.
We have other means to achieve clipped redraws, so this slight change
culled all of them.
Fixes: 43cee4b6b6 ("stage-impl: Do clipped redraws when drawing offscreen")
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2771
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3221>
This changes how state is tracked by introducing an explicit state. We
need this since we use asynchronous calls to the out of process
component that handles actual inhibitation, including idleness.
This means if inhibitations changes rapidly, we might end up with an
incorrect state if we e.g. try to uninhibit while we're currently trying
to inhibit.
This is done by adding a state variable that accounts for the pending
state, as well as the active state, with a function that looks at the
current conditions to derive what state we should be in, and what state
we are in, to decide what the next action should be.
For example, if we're trying to inhibit, but now wants to uninhibit,
we'll wait for the inhibit call to complete, recheck what we want, which
would result in an async uninhibit call being made.
Fixes: 388b534062 ("wayland: Implement idle inhibit protocol")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3219>
This fixes the following
1. Minimize window; minimize animation starts
2. Do something that immediately destroys the animated actor (e.g. terminate)
3. This triggered the timeline of the animation to emit a "stopped"
signal while all transitions of the actor were destroyed
Previously we'd implicitly animate the scale again (set_scale(..)) which
created a new transition The hash table iterator didn't like this and
abort():ed
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3213>
The 'suspend state' is meant to track whether a window is likely to be
visible any time soon. The hueristics for this are as follows:
* If a window is hidden, it will enter the 'hidden' state.
* If a window is visible, and unobscured, it will enter the 'active'
state.
* If a window is visible, but obscured by another window, it will enter
the 'hidden' state.
* If there is a mapped clone of a window, it will enter the 'active'
state.
* If the window has been in the 'hidden' state for 3 seconds, it will
enter the 'suspended' state.
This will eventually be communicated to Wayland clients so that they can
change their behaviour to e.g. save power.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3019>
Previously it transformed a physical CRTC coordinate to a logical desktop
coordinate. But current and future users of the function all require
conversion from logical coordinates to physical coordinates. We would have
had to always invert the transform parameter which is a waste of time when
we can instead just invert the function behaviour.
We also simplify the parameters to show both the point coordinate and the
area dimensions are potentially transformed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3180>
When creating a new stream, check if the preferred format is
different from the default (COGL_PIXEL_FORMAT_BGRX_8888). If
it is, then also include it in the list of potential formats
for the stream.
COGL_PIXEL_FORMAT_BGRX_8888 is still passed around as it's
both the default, and the fallback for when things go wrong.
When creating buffers, use the negotiated SPA format instead
of a hardcoded value. We leave it to PipeWire to figure out
what's the best format, since clients may not support the
preferred format of the stream.
Due to how chaotic things got, this commit also cleans up
the create_pipewire_stream() to use an auxiliary array of
SPA formats, which is then iterated on in order to generate
the format pods.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3175>
In future commits, we will want to create DMA-BUFs with pixel
formats other than COGL_PIXEL_FORMAT_BGRX_8888. In preparation
for that, let's start passing a new pixel format parameter to
this function, and the corresponding winsys vfunc.
All callers of this function pass COGL_PIXEL_FORMAT_BGRX_8888
for now. Next commits will change that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3175>
Freeing the window opaque region rather than the frame one when was
leaking the frame opaque region and wrongly setting the window opaque
region to NULL.
Fixes: 82b2b7688 ("core: Add infrastructure to keep window frames' opaque regions")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3188>
This is something the compositor could now track by itself, instead of
being pushed through events. It also makes more sense to do this directly
when the grabbing conditions change, as opposed to the next event.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3185>
Except for the tests that launches `mutter`, use a custom shell
implementation. It's roughly a copy of default.c with some cleanups on
top. A custom shell allows for a bit more freedom when doing testy
things.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3185>
This splits culling into two different phases to move unobscured region
culling to pre-paint to fix#2680. This is needed as direct scanout
skips the paint phase altogether, but the pre-paint phase always runs as
it's used for selecting the direct scanout surface.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3127>
With the ClutterEvent subtype structs sealed, this remains the only useful
struct type that is now usable on the Javascript side. Make all
ClutterActorClass event vmethods use ClutterEvent, and update all users
to this change.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3163>
In test situations we sometimes do not create a libinput context, so
our check on dispose to see if we need closing the input thread is off
if META_SEAT_NATIVE_FLAG_NO_LIBINPUT was provided.
Check the input thread existing instead, since that is the thing we
want to undo here.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
Move the string construction bits in the event logging happening in
MetaSeatImpl to a clutter_event_describe() call, so that it has more
freedom in fiddling with ClutterEvent internals, and may be potentially
reused in other places.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
Add methods, and change the API of some rarely used methods, in order
to make all event info currently held/necessary accessible through
ClutterEvent getters, instead of direct field access.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
Since the full decomposed modifier state is unused, and only the
effective modifier mask matters to users, the new constructors take
just this effective modifier mask. This means this helper went
unused in the port to the new constructors, so can be now dropped.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
Since the full decomposed modifier state is unused, and only the
effective modifier mask matters to users, the new constructors take
just this effective modifier mask. This means this helper went
unused in the port to the new constructors, so can be now dropped.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
This is done from the backend X11 connection, but needs directing at times
from the frontend X11 connection. Commit 5a8509f895 added a XEvent
argument presumably for possible future expansions that did never come.
Since this function is nothing about events, drop the XEvent argument and
make the name a little bit more ad-hoc (according to what it does, at
least).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
Despite the attempt to make this a generic interface, this was
pretty much used only by the X11 backend, and now it ported away
from it.
This now stands unused and may be removed, in favor of backends
each creating and injecting events as they please.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
This is about the only reason now to go through the ClutterBackend
translate_event vmethod. We can do that directly, and stop requiring the
generic vmethod that is actually just used for X11 events.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3153>
