This change fixes the issue where the cursor is always
embedded in the frames even when the client has requested
the cursor information be sent as metadata in the stream.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2629>
This reverts commit eac227a203.
Currently, Flatpak applications can bypass the X11 permission setting
and access the X server through abstract sockets because X11 authentication
is not enforced for the current user ID.
Fix this by always requiring X11 authentication for Xwayland. This also
means applications without XAUTHORITY set to the file with Mutter's
Xwayland credentials cannot connect to X, including apps launched from
VT or SSH.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2633>
When deciding if a window should be unredirected because it was causing
fullscreen damage in the past, it was not considered whether the window
is still fullscreen. This could result in a floating window being
unredirected if it was chosen for unredirection because of
_NET_WM_BYPASS_COMPOSITOR = 1 and was previously fullscreened for >= 100
frames, long enough to change does_full_damage, before getting
unfullscreened.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2434
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2651>
Back in 2014 sending pressed keys to Wayland clients caused issues,
because at least Xwayland didn't handle that gracefully, causing issues
like ghost-pressed keys. A way it was reproduced was quickly alt-tab:ing
to and from a Firefox window, which would cause the File menu bar
incorrectly appearing.
While this was reported to the Xwayland component back then, it was,
probably by mistake, assumed to be an issue in mutter, and mutter
stopped sending pressed key events on enter.
The following year, Xwayland was eventually fixed, but the work around
in mutter has been kept around until it was again noticed as an
inconsistency between compositor implementations.
Lets remove the work around, and follow the spec, again.
This reverts commit c39f18c2d4.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2457
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2657>
We'd set the capabilities to 'none', meaning all previously enabled
device classes would be disabled. That means we shouldn't re-disable
them directly after.
This ensures '..disable()' is only called once for every '..enable()'.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2657>
With high frequency mouse devices, we would send very many configure
events per each update cycle, which had the end result that some clients
constantly re-allocating and redrawing their buffers far too often, if
they did this in direct response to xdg_toplevel configure events.
Lets throttle the interactive resize updates to stage updates, to avoid
having these clients doing the excessive buffer reallocation.
This also removes some old legacy X11 client resize throttling, that
throttled a bit arbitrarily on 25 resizes a second; it is probably
enough to throttle on stage updates for these clients.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2652>
Some mice send a value slightly lower than 120 for some detents. The
current approach waits until a value of 120 is reached before sending a
low-resolution scroll event.
For example, the MX Master 3 sends a value of 112 in some detents:
detent detent
| | |
^ ^ ^
112 REL_WHEEL 224
As illustrated, only one event was sent but two were expected. However,
sending the low-resolution scroll event in the middle plus the existing
heuristics to reset the accumulator solve this issue:
detent detent
| | |
^ ^ ^ ^
REL_WHEEL 112 REL_WHEEL 224
Send low-resolution scroll events in the middle of the detent to solve
this problem.
Fix https://gitlab.gnome.org/GNOME/mutter/-/issues/2469
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2668>
Previously, when scroll was received in a remote session, it was handled
as continuous scroll.
This generated issues with clients without high-resolution scroll
support as the code path in charge of accumulating scroll until 120 is
reached was not used and therefore discrete scroll events were not being
generated.
Handle scroll generated in a remote session as discrete scroll when the
source is CLUTTER_SCROLL_SOURCE_WHEEL to fix this issue.
Fix https://gitlab.gnome.org/GNOME/mutter/-/issues/2473
Fixes: 9dd6268d13 ("wayland/pointer: Send high-resolution scroll data")
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2664>
In fcfe90aa, multiple for loops were replaced with
META_WAYLAND_SURFACE_FOREACH_SUBSURFACE.
However, this substitution was not side-effect free, and introduced a
null-pointer dereference risk as shown in the example below:
Old:
for (n = g_node_first_child (surface->subsurface_branch_node);
n;
n = g_node_next_sibling (n))
{
if (G_NODE_IS_LEAF (n))
continue;
meta_wayland_surface_update_outputs_recursively (n->data);
}
n is checked for NULL during each loop in the condition expression.
Therefore, when `G_NODE_IS_LEAF (n)` is called, `n` is guaranteed not to
be NULL. Note also that g_node_first_child is also NULL-safe since it
performs a NULL check internally.
New:
META_WAYLAND_SURFACE_FOREACH_SUBSURFACE (surface, subsurface_surface)
meta_wayland_surface_update_outputs_recursively (subsurface_surface);
=
for (GNode *G_PASTE(__n, __LINE__) = meta_get_first_subsurface_node ((surface)); \
(subsurface = (G_PASTE (__n, __LINE__) ? G_PASTE (__n, __LINE__)->data : NULL)); \
G_PASTE (__n, __LINE__) = meta_get_next_subsurface_sibling (G_PASTE (__n, __LINE__)))
In the new logic `subsurface` is still checked for NULL in the loop
condition. However, in the new loop init:
...
meta_get_first_subsurface_node (MetaWaylandSurface *surface)
...
n = g_node_first_child (surface->subsurface_branch_node);
if (!G_NODE_IS_LEAF (n))
...
The above implementation performs a `G_NODE_IS_LEAF` call, which
performs a dereference on `n`, without first checking for NULLs.
This NULL dereference triggers the following gnome-shell crash:
Core was generated by `/usr/bin/gnome-shell'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 meta_get_first_subsurface_node (surface=0x55d589623450) at ../src/wayland/meta-wayland-surface.h:399
#1 pointer_can_grab_surface (pointer=0x7f6dc4012700, surface=0x55d589623450) at ../src/wayland/meta-wayland-pointer.c:1306
#2 0x00007f6ddb94d509 in meta_wayland_pointer_can_grab_surface (pointer=<optimized out>, surface=surface@entry=0x55d589623450, serial=serial@entry=996) at ../src/wayland/meta-wayland-pointer.c:1321
#3 0x00007f6ddb950d05 in meta_wayland_seat_get_grab_info (seat=seat@entry=0x55d586c24f20, surface=0x55d589623450, serial=996, require_pressed=require_pressed@entry=0, x=x@entry=0x0, y=y@entry=0x0)
at ../src/wayland/meta-wayland-seat.c:467
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2655>
Unlike the multi-view path, the optimized/single-view one doesn't check
if the surface-actor is really present on the view. That is the case
whenever it's hidden - e.g. when the window is minimized.
Fixes 3b7137cb35
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2662>
Fullscreen Wayland toplevel surfaces don't need to respect the
configured size in which case the window content get centered on a black
background which covers the whole monitor.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
Fullscreen Wayland toplevel surfaces don't need to respect the
configured size in which case it should be shown centered on the monitor
with a black background. The black background becomes part of the window
geometry.
The surface container is responsible for correctly culling the surfaces
and making sure the surface actors are removed from the actor tree to
avoid destroying them.
The window actor culling implementation assumes all surfaces to be direct
children of said actor. The introduction of the surface_container actor
broke that assumption. This implements the culling interface in
MetaWindowActorWayland which is aware of the actor surface_container and
fullscreen state.
v2: Fix forwarding culling to surface even if there is a background.
v2: Don't alter passed geometry.
v2: Update window geometry code documentation to reflect these changes.
v2: Only use constrained rect if we're acked fullscreen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
Prepare for adding Wayland specific culling logic to the
MetaWindowActorWayland class by moving all the logic to the non-abstract
classes, since there will be no reason to keep the logic in
MetaWindowActor around.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
This is helpful to know what current state a window actually have, in
contrast to the state in MetaWindow (e.g. MetaWindow::fullscreen) which
is the intended state, be it current or not yet so.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
First make sure we call 'move_resize()' in all cases where the size or
position can change, then move the updating of the buffer rect to the
same place as we update the frame rect. This means keeping track of
surface size changes, in addition to geometry changes, and calling
finish_move_resize() whenever any of those changes, in addition to
acknowledged configurations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
A "window rect" in most places refers to the rectangle the window
corresponds to when it comes to window management. MetaWindow::rect also
refers to this window management related rectangle. However in the
geometry sync functions, it instead called what was to be the rectangle
the actor should have as "window rect", which is arguably a bit
confusing. Fix this by renaming it "actor_rect" so that it becomes clear
that it's the rectangle the actor should get on the stage.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
MetaWindowActor previously peeked at the number of child Actors to
determine the number of surfaces. The following commit rearranged the
tree such that MetaWindowActorWayland always has two Actors. This change
lets the subclass determine if the main surface describes the whole
window.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
When a window configuration is constructed for a Wayland surface it
contains a position, size and a scale. The scale is the geometry scale
for the configuration, i.e. before the size is sent the passed dimension
is divided with the passed scale.
When moving between monitors with different scales, if we use the
existing geometry scale, this means we will send a configure event with
incorrect dimensions. Fix this by calculating the scale used in the
configuration given the rect we're configuring with as this will mean
the correct size will be sent to the client.
v2: Removed the fullscreen condition. Don't know why it was added to
begin with.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
There were some magic conditions that decided when
meta_window_constrain() was to be called or not. Reasoning about and
changing these conditions were complicated, and in practice the caller
knows when constraining should be done. Lets change things by adding a
'constrain' flag to the move-resize flags that makes this clearer. This
way we can, if needed, have better control of when a window is
constrained or not without leaking that logic into the generic
to-constrain-or-not expression.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
We have no way to sanely add safe modes if there are no modes we can
compare with, thus don't try.
Fixes the following crash:
#0 are_all_modes_equally_sized at ../src/backends/native/meta-output-kms.c:284
#1 maybe_add_fallback_modes at ../src/backends/native/meta-output-kms.c:310
#2 init_output_modes at ../src/backends/native/meta-output-kms.c:347
#3 meta_output_kms_new at ../src/backends/native/meta-output-kms.c:414
#4 init_outputs at ../src/backends/native/meta-gpu-kms.c:332
#5 meta_gpu_kms_read_current at ../src/backends/native/meta-gpu-kms.c:368
#6 meta_gpu_kms_new at ../src/backends/native/meta-gpu-kms.c:403
#7 create_gpu_from_udev_device at ../src/backends/native/meta-backend-native.c:461
#8 init_gpus at ../src/backends/native/meta-backend-native.c:551
#9 meta_backend_native_initable_init at ../src/backends/native/meta-backend-native.c:632
Fixes: 877cc3eb7d44e2886395151f763ec09bea350444
Related: https://bugzilla.redhat.com/show_bug.cgi?id=2127801
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2646>
This just checks for any chromaticity being zero and gamma being in
range but we could do a better job at detecting bad data in the future.
Also check the return value of cmsCreateRGBProfileTHR which can be NULL.
Fixes gnome-shell#5875
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2627>
Make sure that if we wiggle a scan-out capable surface a bit, it won't
scan out if it's not exactly in the right position. Do this by first
making the window not fullscreen, then moving it back and forth,
verifying the correct scanout state for each presented frame.
This test addition reproduces the issue described in
https://gitlab.gnome.org/GNOME/mutter/-/issues/2387.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2624>
If we have a window that match the size (i.e. will pass the "fits
framebuffer" low level check), that doesn't mean it matches the
position. For example, if we have two monitors 2K monitors, with two 2K
sized windows, one on monitor A, and one on monitor both monitor A and
B, overlapping both, if the latter window is above the former, it'll end
up bing scanned out on both if it ends up fitting all the other
requirements.
Fix this by checking that the paint box matches the stage view layout,
as that makes sure the actor we're painting isn't just partially on the
right view.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2387
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2624>
Painting the swap region with CLUTTER_DEBUG_PAINT_DAMAGE_REGION happens
on the view framebuffer, so don't transform the region we paint to the
onscreen.
Fixes the swap region painting on rotated monitors.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2590>
Gnome-shell uses meta_display_focus_default_window() when shell elements
loose focus which is the case with Alt+Tab window switching. Globally
active input clients don't immediately gain focus though so if
meta_display_focus_default_window focuses a wrong window stacking and
focus don't behave as expected.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2489>
New commands to set the number of workspaces, activate a workspace, with
and without focus, move windows to specific workspaces, and check the
stacking on a specific workspace.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2489>
When switching workspaces we previously focused on whatever window is on
top of the stack. If a window is marked as "always on top" then it would
always receive focus when switching workspaces.
Fixes#2240
Fixes gnome-shell#5162
Fixes#178Fixes#678
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2489>
