Different bits of code were using slightly different checks to test
whether a window was an attached dialog. Add a new
meta_window_is_attached_dialog(), and use that everywhere.
Also, freeze the is-attached status when the window is first shown,
rather than recomputing it each time the caller asks, since this could
cause problems if a window changes its type after it has already been
attached, etc. However, if an attached window's parent is destroyed,
or an attached window changes its transient-for, then fix things up by
destroying the old MetaWindow and creating a new one (causing
compositor unmap and map events to be fired off, allowing the display
of the window to be fixed up).
Remove some code in display.c that tried to fix existing windows if
the gconf setting changed, but which didn't actually do anything (at
least under gnome-shell). However, if 654643 was fixed then the new
behavior with this patch would be that changing the gconf setting
would affect new dialogs, but not existing ones.
https://bugzilla.gnome.org/show_bug.cgi?id=646761
get_outer_rect now returns the visible region, and a new get_input_rect
method returns the boundaries of the full frame, including the possible
invisible regions. When undecorated, both do the samething.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
There were actually *two* MetaFrameGeometry structs: one in theme-private.h,
one in frame.h. The latter public struct was populated by a mix of (void*)
casting and int pointers, usually pulling directly from the data in the private
struct.
Remove the public struct, replace it with MetaFrameBorders and scrap all
the pointer hacks to populate it, instead relying on both structs being used
in common code.
This commit should be relatively straightforward, and it should not do any
tricky logic at all, just a sophisticated find and replace.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
In preparation for switching to handling the output shape purely by what we
paint, stop applying a shape to the frame of the window. Even when we restore
handling the output shape, this will change the behavior with respect to input;
transparent areas between the frame and the contents will stop clicks rather
than passing them through, but that is arguably at least as expected
considering how that we decorate shaped windows with a frame all around.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
When detaching/attaching a dialog, we were only updating
appears-focused on the parent if the child itself was focused, but in
fact, we need to do it if the child has an attached child which is
focused too.
To simplify the case of detaching a focused subtree from its parent,
we change meta_window_propagate_focus_appearance() to use
@window->display->focus_window as the window to add/remove as the
attached_focus_window, and @window only as the starting point to
propagate from. That way we can propagate focus-removal up to
@window's (soon-to-be-ex-)ancestors without having to remove it from
its descendants as well.
https://bugzilla.gnome.org/show_bug.cgi?id=647712
Don't set a window's xtransient_for if it would create a loop. Since
this is the only place we ever set xtransient_for, we can therefore
assume everywhere else that it does not loop.
https://bugzilla.gnome.org/show_bug.cgi?id=647712
Since version 3.0, GTK+ has support for style variants. At the moment,
themes may provide a dark variant, which can be requested by
applications via GtkSettings. The requested variant is exported to
X11 via the _GTK_THEME_VARIANT property - support this property, in
order to pick up the correct style variant in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
If a window is not maximizable, then that probably means it looks dumb
at very large sizes. Even if its hints would allow you to manually
resize it to a large size, don't allow automatically tiling it to half
the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=647901
An ARGB window with a frame is likely something like a transparent
terminal. It looks awful (and breaks transparency) to draw a big
opaque black shadow under the window, so clip out the region under
the terminal from the shadow we draw.
Add meta_window_get_frame_bounds() to get a cairo region for the
outer bounds of the frame of a window, and modify the frame handling
code to notice changes to the frame shape and discard a cached
region. meta_frames_apply_shapes() is refactored so we can extract
meta_frames_get_frame_bounds() from it.
https://bugzilla.gnome.org/show_bug.cgi?id=635268
If a window can not be tiled, e.g. due to its minimum size hints,
dragging away from the top after activating the maximize tile preview
does not cancel the maximization request, the only way to do so is by
hitting Escape.
To fix, reset the tiling state in the maximize-tile code path as
well if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=646149
Apparently the "fox" toolkit doesn't set WM_CLIENT_MACHINE; while we
could do gymnastics to attempt to figure this out (talk to the X
server?), better to just default to FALSE.
https://bugzilla.gnome.org/show_bug.cgi?id=647662
Since appears-focus only propagates up from modal dialogs, if an
application removed the modal hint from a dialog before destroying it,
then its parent would be left with a stray reference to it in
attached_focus_window, causing it to be permanently appears-focused.
The obvious fix, calling meta_window_propagate_focus_appearance() when
the modal hint is removed, tends to cause noticeable flashing, because
the window will get drawn unfocused and then focused again.
So instead we just change meta_window_propagate_focus_appearance() to
check the window type only when focusing in, not when focusing out.
This would also cause flashing, but in this case we can avoid it by
not notifying the change in appears-focus on the parent window if it
is the expected_focus_window (which it will be by this point). (This
does mean though that if something weird happens and the window
doesn't end up becoming the focus window, it won't get redrawn
unfocused until something else forces it to.)
https://bugzilla.gnome.org/show_bug.cgi?id=647613
We need to redraw a window's shadow any time the value of
meta_window_appears_focused() changes. So make that into a property so
we can get notifications on it.
https://bugzilla.gnome.org/show_bug.cgi?id=636904
This is useful for DnD to another monitor in gnome-shell.
In addition to a normal move it corrects the saved rect for
maximized and fullscreened windows.
https://bugzilla.gnome.org/show_bug.cgi?id=645032
Currently attached modal dialogs are not resizable, but we don't
communicate this to GTK+, so the dialog may end up with resize
grips anyway. As a fix, allow resizing, but account for the dialog
being centered to its parent.
https://bugzilla.gnome.org/show_bug.cgi?id=643597
Commit 96c43866 changed the tiling behavior to prefer edge tiling
over maximization in corner cases (well, quite literally). As a
side effect, it only allows untiling of edge-tiled windows by
dragging the window towards the correct edge.
This patch restores the old behavior for untiling, while keeping
the new behavior for untiled windows.
https://bugzilla.gnome.org/show_bug.cgi?id=645455
For tiling, we check whether the pointer is near the edges of
the monitor where the pointer is located, so checking that the
pointer is within the bounds of the monitor is unnecessary and
confusing.
If dragging the title bar to the edge of the screen to side-tile,
it's easy to end up above the workarea and end up maximized instead.
Make the entire side of the screen act as edge-tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=644961
In a performance or regression testing environment, we may want to
only manage windows from a particular test program, and ignore all
other windows. The MUTTER_WM_CLASS_FILTER environment variable is a
list of WM_CLASS values that should be managed; other windows will
be unmapped and ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=644252
This adds a preference that when enabled makes all windows not on
the primary monitor be visible on all workspaces (i.e. not part of the
workspace switching handling).
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Sometimes on_all_workspaces is requested by the client/user, and sometimes
its calculated implicitly due to internal state. We split this up so that
we know when the user has explicitly asked for sticky window, when e.g.
setting wmspec properties or storing session info.
on_all_workspaces means this window is visible on all workspaces.
on_all_workspaces_requested, means the user explicitly made the window
sticky somehow (via imported session, _NET_WM_STATE from another wm,
toggled in the window menu, etc). It always implies on_all_workspaces is
TRUE.
Right now the only time we set on_all_workspaces is for override-redirect
windows, but later we can add a "windows on non-primary monitor are not
part of the workspace switching" feature.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
The latter move method will place the window by the origin of the
enclosing window decoration/frame, while the former will place by the
origin of the inner window, itself.
(Also moved meta_window_showing_on_its_workspace comment into
gtk-doc)
https://bugzilla.gnome.org/show_bug.cgi?id=642355
If mutter is going to be a "real" library, then it should install its
includes so that users can do
#include <meta/display.h>
rather than
#include <display.h>
So rename the includedir accordingly, move src/include to src/meta,
and fix up all internal references.
There were a handful of header files in src/include that were not
installed; this appears to have been part of a plan to keep core/,
ui/, and compositor/ from looking at each others' private includes,
but that wasn't really working anyway. So move all non-installed
headers back into core/ or ui/.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
If we are previewing hidden windows, we might be previewing them in a context
like a thumbnail view of a workspace where we care about positioning. So, instead
of waiting until the window is first actually shown to place it, if
live_hidden_previews is set, place the window window when we first compute its
visibility, even if we don't end up showing it.
https://bugzilla.gnome.org/show_bug.cgi?id=641309
The previous tiling state of a grabbed window should be restored
if the drag operation is cancelled (by hitting the Escape key).
This might involve to meta_window_tile(), so export the function
in window-private.h.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
To deal with reentrancy from compositor plugins doing things like
moving windows between workspaces in an effect callback, update
the visible_to_compositor flag before calling into the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=613124
Maximized tiled windows end up with an inconsistent tile mode when
unmaximized by other means than dragging the window free (e.g.
using the unmaximize button or double clicking the title bar), so
reset the tile mode when unmaximizing.
This is not a problem for side-by-side tiling, as there are no
alternatives to dragging the window free.
When a tiled window is maximized (e.g. by clicking the title bar
button), unmaximizing the window restores the tiled state. While
this is reasonable for side-by-side tiling, it is confusing for
"maximize" tiled windows, as unmaximization has no visible effect.
Change unmaximize to only restore the tiled state of side-by-side
tiled windows.
The original patch triggered "maximize" when the window was dragged
to the top, so that the pointer was below or on the monitor edge and
above the work area's top.
If there's no chrome at the top of the monitor, so that monitor edge
and work area top fall together, the pointer cannot be moved above
the work area's top, so tiling was not triggered.
The old behavior of being able to shake loose a maximized window
overlaps with and is for the most part superceded by top edge tiling.
This commit changes the code to only enable shake loose behavior
when edge tiling is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
In addition to the existing side-by-side tiling modes, this commit
adds a new "maximize" tiling mode. It allows the user to maximize
their windows (in other words, tile with the edge panels) by dragging
their window to the top edge of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
The meta_window_handle_mouse_grab_op_event function ensures
the tile_mode variable is in a consistent state after a drag
op is finished.
The way this is current done is:
if (!window->maximized_vertically &&
window->tile_mode != META_TILE_NONE)
window->tile_mode = META_TILE_NONE;
While valid, it doesn't "read" as well as using the
META_WINDOW_TILED_SIDE_BY_SIDE macro, since the macro is specifically
about side-by-side tiling.
This commit just changes things to use the macro and to not bother
checking the tile mode (since if we just reset it anyway, then it doesn't
matter if the value is right or wrong to begin with).
https://bugzilla.gnome.org/show_bug.cgi?id=630548
Currently, the new tiling feature, supports side-by-side, horizontal
tiling when dragging windows to one of the vertical edges of a monitor.
Other types of tiling (on other monitor edges) are potentially useful,
though.
This commit renames the preference from side_by_side_tiling to
edge_tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
These functions duplicate existing properties; they are added for
convenience and to avoid the GObject property code on some
performance critical painting paths.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
While the Meego developers agreed to switching mutter to GTK+-3.0
unconditionally a while ago, Canonical used a GTK+-2.0 build for their
Unity project. As Canonical now announced a switch to compiz as their
window manager, there is no longer a reason to maintain GTK+-2.0
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=633133
Remove --allow-unprefixed option to the scanner, and fix resulting
problems:
* theme.h and boxes.h are split into a main -header and a private
header that includes stuff that is not generally useful and
hard to introspect. Merge theme-parser.h into theme.h.
* meta_display_get_atom() and meta_window_get_window_type_atom()
are marked as (skip)
* Fix annotation: (element-type Strut) => (element-type Meta.Strut)
https://bugzilla.gnome.org/show_bug.cgi?id=632494
For functions (but not callback types), '(closure)' is used on the
callback parameter, and takes the name of the parameter which is
the closure/user data.
A maximized window can't be resized from the screen edges (preserves
Fitts law goodness for the application), but it's still possible
to start a resize drag with alt-middle-button. Currently we just
don't let the user resize the window, while showing drag feedback;
it's more useful to let the user "break" out from the resize.
This provides a fast way to get a window partially aligned with
the screen edges - maximize, then alt-drag it out from one edge.
Behavior choices in this patch:
- You can drag out a window out of maximization in both directions -
smaller and larger. This can be potentilaly useful in multihead.
- Dragging a window in only one direction unmaximizes the window
fully, rather than leaving it in a horizontally/vertically
maximized state. This is done because the horizontally/vertically
maximzed states don't have clear visual representation and can
be confusing to the user.
- If you drag back to the maximized state after breaking out,
maximization is restored, but you can't maximize a window by
dragging to the full size if it didn't start out that way.
A new internal function meta_window_unmaximize_with_gravity() is
added for implementing this; it's a hybrid of
meta_window_unmaximize() and meta_window_resize_with_gravity().
Port of the metacity patch from Owen Taylor in bug 622517.
https://bugzilla.gnome.org/show_bug.cgi?id=629931
When dragging a window over a screen edge and dropping it there,
maximize it vertically and scale it horizontally to cover the
corresponding half of the current monitor.
Whenever a "hot area" which triggers this behavior is entered, an
indication of window's target size is displayed after a short delay
to avoid distraction when moving a window between monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=606260
Add a preference /apps/mutter/general/attach_modal_dialogs. When true, instead
of having independent titlebars, modal dialogs appear attached to the titlebar
of the parent window and are moved together with the parent window.
https://bugzilla.gnome.org/show_bug.cgi?id=612726
Cleanly build with --warn-fatal. Implementation:
* Liberally apply (skip) where the API is clearly C only, e.g. uses
XLib. The theming code and MutterPlugin are skipped too.
* Add missing (transfer) and (element-type) annotations
For a few functions that had a comment, I turned it into gtk-doc, but
I didn't (with a few exceptions) try to write new documentation in
this pass.
When we do pseudo-management on an override-redirect window, we have to be
careful to augment the existing event mask, not replace it, or
delivery of pointer events will be disrupted.
When we unmanage a window, we shouldn't try to unselect events at all,
since that will interfere with event selection done by GDK.
http://bugzilla.gnome.org/show_bug.cgi?id=597763
A mismerge of the Metacity commit "4943d79 Prevent window self-maximisation"
caused the window's user set size and position to be saved *before*
actually resizing the window to the unmaximized position rather than after.
This meant that after unmaximization the window was in an inconsistent
state and anything that caused a resize to be queued (like a change in
window properties by the application) would cause it to pop back to
the maximized size and position.
https://bugzilla.gnome.org/show_bug.cgi?id=621413
It's useful for plugins to be able to easily detect whether
or not a window is from a remote host. Also, make use of this
in the window delete codepath, instead of looking up the hostname
each time.
https://bugzilla.gnome.org/show_bug.cgi?id=620585
A per-window _MUTTER_HINTS property allowing plugins to use custom hints. The
property holds a colon separated list of key=value pairs; plugin-specific keys
must be suitably namespaced, while 'mutter-' prefix is reserved for internal
Mutter use only.
This commit adds MetaWindow::mutter-hints property, and
meta_window_get_mutter_hints() accessor, as well as the internal machinery for
reading and updating of the hints.
https://bugzilla.gnome.org/show_bug.cgi?id=613123
Whether Metacity honors a raise request from an application should
not be affected by the raise_on_click setting; remove a check that
seems to have been added in error.
https://bugzilla.gnome.org/show_bug.cgi?id=445447
We currently allow XRaiseWindow when the same application (defined
by the window group) is focused, but the kind of old applications
that XRaiseWindow are frequently not setting the window group.
Expand the check to allow the same X client (defined by the looking
at client ID) to raise windows above the focus window.
https://bugzilla.gnome.org/show_bug.cgi?id=567528
Having a MetaDisplay::window-demands-attention signal allows to deal with
windows demanding attention in a cetralized fashion.
The signal is emitted when a window is created with initial demands-attention
state and/or when the state changes later on.
Based on original patch by Jon Nettleton.
https://bugzilla.gnome.org/show_bug.cgi?id=597052
With the change from bug 582639, we no longer call the reload
functions for properties that are not initially set, so the
initialization of fields in window.c has to match what
window-props.c would set for a missing property.
There was only one discrepancy, window->input, which needs
to be set to TRUE by default (or a window missing a WM_HINTS
property won't get focus); we also add explicit initializers
for a couple of fields that were getting 0-initialized
to the correct default value of FALSE for consistency with
the explicit intialization of the rest of the fields.
Bug reported by Dominique Leuenberger
https://bugzilla.gnome.org/show_bug.cgi?id=601228
For some consumers it's significantly more convenient to be able
to directly connect to a signal on the Window to know when
Mutter is done with it, rather than having to connect to each
Workspace object (and handle workspace additions, etc.).
Similarly, add window-created which acts globally.
https://bugzilla.gnome.org/show_bug.cgi?id=598289
When we focus a window on a different desktop, and the calc_showing
idle that hides/shows the windows gets run before we get focus events
back from X, we think that we are hiding the window with the focus
so we focus a "random" window to avoid leaving the user with no focus.
Work around this temporarily by checking display->expected_focus_window;
this isn't a perfect fix because there are cases where
display->expected_focus_window corresponds to a window we tried to
focus in the past but failed, but it makes things work fairly well.
https://bugzilla.gnome.org/show_bug.cgi?id=597352
There was a problem where if, for example, a restack was triggered
out of a clutter event handler, then after Clutter processed the
events, it would proceed immmediately on to repaint the stage without
ever returning control to the GLib main loop. So even though we
had an idle handler installed with a higher priority than the
Clutter stage repainting the clutter stage repainting would happen
first and we'd get a wrong frame.
Fix this by introducing the idea of "later functions", which abstract
the idea of "doing something later" away from g_idle_add() and use
a combination of GLib idle functions and Clutter "repaint functions"
to get our callbacks triggered at the right time, even when they
are installed from a clutter event handler.
https://bugzilla.gnome.org/show_bug.cgi?id=596334
This also resolve a FIXME where MUTTER_PRIORITY_BEFORE_REDRAW
could starve stage repainting.
mutter-window.c originally grew an #include "window-private.h" for
window->override_redirect, but that was just fixed. However since
then it also ended up relying on a few other minor private bits.
To fix that, add meta_window_is_mapped, promote meta_window_toplevel_is_mapped
to public, and use the public MetaDisplay accessor.
When window initially maps, use the more recent of NET_WM_USER_TIME and
startup notification timestamps to compare against last known user action to
decide whether to focus the window or not. Once we show the window, clear
the initial_timestamp_set flag, so the startup notification timestamp is not
taken into account again.
Based on patch for metacity by Alexander Larsson
http://bugzilla.gnome.org/show_bug.cgi?id=573922
Many override-redirect windows (including the Metacity UI windows!)
will have NET_WM_WINDOW_TYPE_NORMAL set on them because of shared
code paths with normal windows in toolkits.
Some current Compositor plugins (default plugin and gnome-shell)
check type == NORMAL to determine if to run effects. While fixing
such plugins to also check if the window is override-redirect is
posisble, it seems cleanest to simply not allow any of the decorated
window types to be set on an override-redirect window and to force
these types to META_WINDOW_OVERRIDE_OTHER. This will prevent other
similar problems from showing up in the future.
http://bugzilla.gnome.org/show_bug.cgi?id=590971
As a sideffect of commit a576f7a1ea, override
redirect windows of type _NET_WM_WINDOW_TYPE_NORMAL do not have their
features recalculated during MetaWindow construction (same as regular
windows of type _NET_WM_WINDOW_TYPE_NORMAL), so we need to set the initial
values accordingly.
Although the spec designates some window types as typically used for
override redirect windows, it does not prohibit the use of these with
managed windows, so we should not abort if we encounter one of these.
http://bugzilla.gnome.org/show_bug.cgi?id=583870
Previously, changes to the visibility of a window could be indicated
by meta_compositor_map_window(), meta_compositor_unminimize_window(),
meta_compositor_set_window_hidden(), etc, with the exact behavior
depending on the 'live_hidden_windows' preference.
Simplify this so that visibility is controlled by:
meta_compositor_show_window()
meta_compositor_hide_window()
With an 'effect' parameter provided to indicate the appropriate
effect (CREATE/UNMINIMIZE/MINIMIZE/DESTROY/NONE.)
The map state of the window is signalled separately by:
meta_compositor_map_window()
meta_compositor_unmap_window()
And is used only to control resource handling.
Other changes:
* The desired effect on show/hide is explicitly stored in
MetaWindow, avoiding the need for the was_minimized flag.
At idle, once we calculate the window state, we pass the
effect to the compositor if it matches the new window
state, and then clear the effect to start over for future
map state changes.
* meta_compositor_switch_workspace() is called before any windows
are hidden or shown, allowing the compositor to avoid hiding
or showing an effect for windows involved in the switch.
http://bugzilla.gnome.org/show_bug.cgi?id=582341
* Handling of post-effect cleanups for MutterWindow are
simplified - instead of trying to do different things based
on the individual needs of different effects, we just wait until
all effects complete and sync the window state to what it
should be.
* On unmap, once we destroy the pixmap, we tell ClutterX11Pixmap
that we've done so, so it can clean up and unbind. (The
unbinding doesn't seem to be working properly because of
ClutterGLXPixmap or video driver issues.)
http://bugzilla.gnome.org/show_bug.cgi?id=587251
Add a paint function that checks all windows for repair and
shape updates; this:
- simplifies the logic for when a window needs to be repaired
- avoids duplicate work when we get multiple damage effects
- avoids the need to look ahead in the event queue
Instead of relying on repair to implicitly resize the
MutterWindow actor, set the size explicitly when the core
code updates the geometry. (This is needed because we haven't
repaired yet when we start an animation, and the animation
may depend on the size to, e.g., rescale from the center.)
Because the core geometry update happens before we start
maximize/unmaximize effects we need to work around this by
passing both the old and new geometry to the compositor.
http://bugzilla.gnome.org/show_bug.cgi?id=587251
Remove a number of functions that were either entirely unimplemented
or had empty implementations for the Clutter-compositor.
meta_compositor_begin_move()
meta_compositor_update_move()
meta_compositor_end_move()
meta_compositor_set_active_window()
meta_compositor_free_window()
http://bugzilla.gnome.org/show_bug.cgi?id=581813
Now that we only have one compositor, there's no reason to access the
compositor functions through a vtable. Remove the MetaCompositor virtualization
and make the clutter code implement the meta_compositor_* functions
directly.
Move the checks for the compositor being NULL from the vtable wrappers
to the calling code (most of them were already there, so just a few
needed to be added)
Note: the compositor is actually hard-coded on at the moment and the plan
is to remove the non-composited code entirely, so the checks are
added only to keep things neat: they have no practical effect.
http://bugzilla.gnome.org/show_bug.cgi?id=581813
Mutter is a Clutter-based compositing manager. So, remove the code for
the XRender-based compositor, and make it mandatory to have XComposite,
XRender and Clutter.
Run-time support for non-composited operation is left for now.
* src/compositor/mutter/: Move files from this subdirectory into
the main compositor/ directory.
* compositor/compositor-xrender.ccompositor/compositor-xrender.h:
Remove
* include/compositor-clutter.h: Remove this stray file, it had been
replaced with compositor-mutter.h some time back.
http://bugzilla.gnome.org/show_bug.cgi?id=581813
Don't add override-redirect windows to MetaStack; we shouldn't
be restacking them.
Since we *aren't* stacking the override-redirect windows, we need to
be careful that to ignore them when looking for the top managed
window.
http://bugzilla.gnome.org/show_bug.cgi?id=585984
In order to properly track the stacking order for override-redirect
windows, move meta_compositor_sync_stack() call into MetaStackTracker.
In the new location, we sync the stack as a before-redraw idle function,
rather then using the freeze-thaw facilities of MetaStack. This is
simpler, and also properly compresses multiple stack changes on
notifications received from the X server.
http://bugzilla.gnome.org/show_bug.cgi?id=585984
Override-redirect windows should not be moved or resized by the
window manager.
- Mark override-redirect windows as already placed to avoid
placing them when first shown.
- Don't move-resize newly created override-redirect MetaWindow
- Don't queue a resize on override-redirect windows when reading
their WM_TRANSIENT_FOR hint.
- Add g_return_if_fail (!window->override_redirect) to catch
unexpected code paths that might result in override-redirect
windows being moved or resized.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Normally a window that is "on all workspaces", is also on a particular
workspace (to deal with being unstuck.) This is pointless for
override-redirect windows.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Don't include override-redirect windows in the list return by
meta_display_list_windows(), since we almost never want to handle
them when considering "all window" for the display. Add a separate
meta_display_list_all_windows() that includes override-redirect
windows.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Skipping handling of properties for override redirect windows has
two advantages: first it reduces the amount of work needed to get
an override-redirect window (menu, tooltip, drag icon) onto the
screen. But more importantly, it reduces the number of code-paths
for an override-redirect to get into some code portion where it
isn't expected.
* Integrate the list of properties we load initially with the
list of property hooks; this avoids having two separate lists
that we have to keep in sync.
* Add a flag to MetaWindowPropHooks to indicate whether the
property should be handled for override-redirect windows;
currently we load a) properties that identify the window -
useful for debugging purposes b) WM_TRANSIENT_FOR (could be
used to associate menus with toplevels.)
* For properties that aren't always loaded through window-props.c,
add !window->override checks to places that trigger loading,
and add g_return_if_fail(!window->override) to the load
functions as a double-check.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
Add g_return_if_fail() to check that window-management functions like
meta_window_maximize() aren't called on override-redirect windows.
This reveals that were were "unminimizing" override-redirect windows
when adding them; avoid doing that.
http://bugzilla.gnome.org/show_bug.cgi?id=582639
On subsequent changes, if there is a NET_WM_USER_TIME_WINDOW, then
read the property from that rather than from the main window.
(Fix an accidental regression: the right Window was being computed
but no longer passed in.)
http://bugzilla.gnome.org/show_bug.cgi?id=585979
When we add a window and it gets hidden as the first thing, we need
to show not just the frame window, but also the window itself.
Otherwise when the window subsequently becomes visible, it will
just be an empty frame.
Add helper functions to reduce current code duplication and avoid
adding more.
http://bugzilla.gnome.org/show_bug.cgi?id=586309
Code:
All references in the code not related to themes, keybindings, or
GConf were changed from 'metacity' to 'mutter'. This includes, among other
things, strings, comments, the atoms used in the message protocol, and
the envvars used for debugging. The GConf schema file was reduced to
the 3 settings new to mutter.
The overall version was brought up to 2.27 to match current gnome.
Structure:
All files named '*metacity*' were renamed '*mutter*' with appropriate
changes in the automake system. Files removed are
doc/creating_themes, src/themes, doc/metacity-theme.dtd,
metacity.doap. These files will eventually end up in an external
gnome-wm-data module.
Installation location:
On the filesystem the mutter-plugindir was change from
$(libdir)/metacity/plugins/clutter to just $(libdir)/mutter/plugins.
The mutter-plugins.pc.in reflects these changes.
Note:
mutter.desktop.in and mutter-wm.desktop both continue to have
X-GNOME-WMSettingsModule=metacity set. This allows
gnome-control-center to continue using libmetacity.so for
configuration. This is fine since most the general keybindings and wm
settings are being read from /apps/metacity/* in gconf.
When the window being hidden/mimimized has focus, is modal, but is not on the
currently active workspace (e.g., during workspace switch before the new
focus window is activated), we must prevent focus being passed to the modal
window ancestor (otherwise the ancestor ends up being forcefully moved onto
the active workspace).
Make meta_window_get_icon_geometry() public, so that it can be used
to from plugins to animate windows minimizing to the correct
position.
Based on a patch from Cosimo Cecchi <cosimoc@gnome.org>
http://bugzilla.gnome.org/show_bug.cgi?id=571109
The MetaDirection enumeration had META_SIDE_* values in it that
were used in some places where an enum with only four directions
was needed. Split this off into a separate enum called MetaSide
and use that enum name where appropriate.
Expose restacking and a window's stack layer to allow a compositor
to insert elements into the window stack in the right location.
(See Bug 571827 – hide panel when screensaver is active)
src/core/stack.h src/include/common.h: Move MetaStackLayer to
a public header.
src/core/screen.c src/core/screen-private.h src/core/stack.c:
Add a ::restacked signal emitted after we finish restracking.
src/core/window.h src/include/window.h: Add meta_window_get_layer()
In particular, make it so that we call meta_compositor_add_window() on
a new window before calling meta_compositor_sync_stack() to position
it. The list returned by mutter_plugin_get_windows() is only updated
by sync_stack(), but sync_stack() only pays attention to windows that
add_window() has already been called on. So without this change, a
newly-mapped window will not be returned by
mutter_plugin_get_windows() until after the *next* restacking.
http://bugzilla.openedhand.com/show_bug.cgi?id=1512
window property handlers. The ones which remain don't
actually look up the new value in the ordinary way, and
so are a little trickier to merge. Added an "initial"
flag to be on the safe side that the behaviour is the
same as before (so we don't do things when a window's
first mapped that we only used to do when a property
changed). Partial fix for bug #549886.
* src/core/window-props.c:
* src/core/window-props.h:
* src/core/window.c:
svn path=/trunk/; revision=4089
Requiring the compositor private object to be a GObject allows the
return value of meta_window_get_compositor_private() to be used
via gobject-introspection, since the type and memory management
can be determined.
This allows a reverse mapping from MetaWindow to MutterWindow.
- Change meta_window_get/set_compositor_private to use GObject
rather than void *
- Adapt code in compositor-mutter.c to match.
* src/core/window.c: windows which attempt to present themselves
but are offscreen end up demanding attention, unless they
are transient, when they move to the current workspace
as before. Closes#482354.
svn path=/trunk/; revision=4060
property and client message. This allows client applications to request
that a fullscreen window cover more than one monitor.
* src/include/boxes.h:
* src/core/boxes.c: Add meta_rectangle_union
* src/core/window-private.h:
* src/core/window.c:
(meta_window_new_with_attrs, meta_window_free, set_net_wm_state,
meta_window_update_fullscreen_monitors, meta_window_client_message): Add
MetaWindow property to store fullscreen monitors field, update
_NET_WM_FULLSCREEN_MONITORS property on windows, and handle client
message.
* src/core/atomnames.h: Add _NET_WM_FULLSCREEN_MONITORS atom.
* src/core/constraints.c (setup_constraint_info): If
_NET_WM_FULLSCREEN_MONITORS is interesting, use the data stored in
MetaWindow::fullscreen_monitors to determine the fullscreen area instead
of the basic xinerama_info area.
svn path=/trunk/; revision=4021
