These changes will happen in the input event management code, so let them
be emitted via the MetaSeatImpl, as that's what we'll have neat access to.
The ClutterSeat signals are now emitted from there.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Move most of the functional bits (those meant to run on a standalone
thread) to a MetaSeatImpl object. This object is managed by the MetaSeatImpl
and not exposed outside the friend MetaSeatNative/MetaInputDeviceNative/
MetaInputSettings classes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Banish MetaInputSettings from MetaBackend "public" API, it's now meant to
spend the rest of its days in the backend dungeons, maybe hanging
off a thread.
MetaInputMapper replaces all external uses.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Delegate on the MetaInputMapper all matching of inputs and outputs,
including configuration. Other secondary aspects, like output
aspect ratio for tablet letterbox mode, or toggling attached devices
with power saving changes, are also moved here.
This makes MetaInputSettings independent of MetaMonitorManager,
all interaction with it happens indirectly via public API entrypoints.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Rename the set_tablet_keep_aspect() vfunc into a set_tablet_aspect_ratio()
one that takes an aspect ratio double, instead of leaking monitor info
into subclasses to let them all figure out this number themselves.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
We have 2 sources (this one in MetaSeatNative, and the one in
MetaBackend) dispatching ClutterEvents to the stage. Make the
MetaSeatNative one exclusively about dispatching the libinput
queue, and leave ClutterEvents to the other.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
This will resort to SW rendering if this cursor renderer does not
own the MetaKmsCursorRenderer, so it's pretty much equivalent thus
far, except we may now implement logic to flip the kms cursor renderer
around.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
We actually have a set_send_events() vfunc that can enable or disable
devices at the libinput and X11 input driver level, so use that. A
positive side effect is that those layers will leave the device at
a consistent idle state (as opposed to going mute maybe amid user
input).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
We are aiming for a split of HW and SW cursor rendering management.
Given the HW plane is a limited resource and the amount of cursor
renderers may be >1 (due to tablets, even though we currently use an
always-software cursor renderer there), it would ideally be able to
switch between renderers.
Being MetaCursorRenderer not really a singleton, having cursor
inhibitor accounting here doesn't pan out. Make it MetaBackend API
so all cursor renderers get the same picture.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
These use now more of a "pull" model, where they receive update
notifications and the relevant input position is queried, instead
of the coordinates being passed along.
This allows to treat cursor renderers all the same independently
of the device they track. This notifying of position changes should
ideally be more backend-y than core-y, a better location will be
figured out in future commits.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Instead of letting the wayland bits maintain an always-software
cursor renderer, let the cursor renderer be managed by the backend,
and only hook to it (as we do for pointer cursor) in the wayland
bits.
ATM, make the cursor renderer still always-software, although
ideally we should allow moving the HW cursor management between
renderers.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Different devices may get standalone cursor renderers, add this API
to adapt slowly to this. The meta_backend_get_cursor_renderer() call
still exists, but shortcuts to the mouse pointer's renderer (as it
actually did before).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Use a new set in MetaInputDeviceNative, this coexists with
ClutterInputDevice coords for the time being. This API will
eventually be only accessed from the input thread.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
While multiple built-in panels isn't actually supported in any
meaningful manner, if we would ever end up with such a situation, e.g.
due to kernel bugs[0], we shouldn't crash when trying to set an
'external only' without any external monitors.
While we could handle this with more degraded functionality (e.g. don't
support the 'switch' method of monitor configuration at all), handle it
by simply not trying to switch to external-only when there are no,
according to the kernel, external monitors available. This would e.g.
still allow betwene 'mirror-all', and 'linear' switches.
The crash itself was disguised as an arbitrary X11 BadValue error, due
to mutter trying to resize the root window to 0x0, as the monitor
configuration that was applied consisted of zero logical monitors, thus
was effectively empty.
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1896904
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1899260
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1607>
xkb recently gained support for user-specified keymaps, which means we
can no longer assume that the configuration data is necessarily fully
complete or correct; and the configuration language is quite a labyrinth,
so it's easy to get wrong. If setting the keymap fails, leave it in
whatever state it previously had, since that seems preferable to crashing
with a NULL pointer dereference.
Resolves: https://gitlab.gnome.org/GNOME/mutter/-/issues/1555
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1605>
In case we only have a single view (or there's only one view left to
check and the actor is visible on previous views) we can take a short-
cut, saving a region allocation and some calculations.
While on it, declare float numbers in '.f' style to make them more
recognizable.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1596>
Commit 03c69ed8 ("Do not go past size hints on resize") was meant to
ensure the size hints set by the client would be honored during resize,
as going past those values could cause the window to move on resize.
However, it did so by calling ensure_size_hints_satisfied() which works
with the frame rect rather than the client rect. As a result, the
minimum size enforced would end up being larger than expected with
client-side decorations.
Use meta_window_maybe_apply_size_hints() instead which automatically
adjusts for client size.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1542
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1594>
Since we schedule frames for each stage view seperately now, surfaces receive
frame callbacks for each stage view they are visible on.
Only emit frame callbacks for the primary stage view.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1468>
Our main use case of `is_obscured()` is frame callback emission.
Since we now support stage views running at differt speeds, we
need to know whether an actor is visible on a specific stage view
in order to schedule frame callbacks accordingly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1468>
Commit e28c1ab4 added a hints_have_changed() function to only
recalculate windows features when the WM_NORMAL_HINTS change.
That function hints_have_changed() however was merely checking whether
the various XSizeHints flags where flipped, which is not sufficient
because the hints may remain the same while the actual values are
changed.
Not checking for the actual value differences would prevent some windows
from being able to switch fullscreen.
Improve the helper function hints_have_changed() to check not only for
flags being flipped, but also for the values being changed for each
relevant XSizeHints flags being set currently.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1534
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1566>
Sometimes the automatically selected primary GPU isn't suitable with no
way to make an well educated guess to do it better. To make it possible
for the user to override the automatically calculated default, make it
possible to override it using a udev rule.
E.g. to select /dev/dri/card1 as the primary GPU, add a file e.g.
/usr/lib/udev/rules.d/61-mutter-primary-gpu.rules (path my vary
depending on distribution) containing the fellowing line:
ENV{DEVNAME}=="/dev/dri/card1", TAG+="mutter-device-preferred-primary"
Reboot or manual triggering of udev rules to make it take effect may be
required.
Related: https://gitlab.gnome.org/GNOME/mutter/merge_requests/1057https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1562
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1562>
Instead of aborting with an error, display a half transparent gray
square instead of cursors and log a warning in the journal, allowing the
user to fix their system withotu having to rely on switching to a TTY.
It will be immediately obvious the cursor is silly looking, which will
be a better hint than just aborting.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1428
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1563>
It'd happen that the test runner would get CPU starved, and not see the
frame-clock changed notification before the timeline stopped. Decrease
the risk for this by moving the initial position of the actor having its
position transitioned to be closer to the view edge. This means the
frame clock will be changed earlier, increasing the chance of the
timeline not stopping before the relayout happens.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1555
For X11 grabs, the pattern matching mechanism would simply ignore
applications which have neither WM_CLASS nor WM_NAME set.
When dealing with an override redirect window however, it is not
uncommon that these window have neither value set as these window are
supposed to be ignored by the window manager.
When the WM_CLASS or the WM_NAME is not set by the client, assume the
value is empty so the pattern matching can allow for these.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1249
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1254>
Monitor tile info is possible to fetch when RANDR version 15 is exposed
by the X11 server. We had inverted the check meaning that only if older
versions were advertised would we attempt to init the tile information.
Fix this guard, thus fix monitor tiling on X11.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1524
Not calling libinput dispatch in the backend constructor defeats the
logic in post init as the device added events have not been processed
yet.
So instead of trying to guess the cursor initial visibility, simply
update it along when devices get added.
Additional benefit, we do not need to walk the all device list looking
for touchscreens anymore, we just need to check the device being added
since the current logic is to hide the cursor as soon as a touchscreen
is found.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1534
At startup, libinput dispatch is called from the MetaSeatNative
constructed callback.
That means that we may get libinput events even before the default seat
is set.
In turn, processing those events may trigger the use the default seat
while it's still not set yet, and cause a crash of gnome-shell/mutter
at startup.
A simple reproducer for this is to start gnome-shell/mutter with a
tablet connected and the stylus in proximity, the proximity event will
cause gnome-shell/mutter to crash at startup.
To avoid that issue, avoid dispatching libinput events early from the
MetaSeatNative constructed callback, those events will eventually get
processed when the seat and the backend are all setup.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1501https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1534
Commit 8bdd2aa7 would offset the window position by the difference
between the configured window size and the committed size from the
client to prevent the window from drifting while resizing.
This, however, did not take into account the actual geometry scale, so
when using any scale greater than 1, the window would rapidly drift away
due to that offset.
In order to solve this, we need to make sure we store away the pending
window configuration in the stage coordinate space, in order to not
loose precision. When we then calculate the offset given the result from
the client, it'll use the right scalars, while before, one scalar was in
surface coordinates, while the other in stage coordinates.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1490
We want the bounding box so `ceilf` seems more appropriate. It was
only written using `roundf` before as a workaround for inaccuracies
coming out of `clutter_actor_get_transformed_size` that would have
tricked `ceilf` into landing on the wrong integer. But that's since
been fixed by 67cc60cbda so we can use `ceilf` now.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1532
Otherwise we might run into a use-after-free and crash on (virtual)
device removal:
Invalid read of size 8
at clutter_input_device_get_device_type (clutter-input-device.c:811)
by update_last_device (meta-backend.c:1282)
by g_main_dispatch (gmain.c:3325)
by g_main_context_dispatch (gmain.c:4016)
by g_main_context_iterate.constprop.0 (gmain.c:4092)
by g_main_loop_run (gmain.c:4290)
by meta_run_main_loop (main.c:708)
by meta_run (main.c:723)
by main (main.c:550)
Address is 32 bytes inside a block of size 504 free'd
at free (vg_replace_malloc.c:538)
by g_type_free_instance (gtype.c:1939)
by clutter_event_free (clutter-event.c:1420)
by _clutter_stage_process_queued_events (clutter-stage.c:830)
by handle_frame_clock_before_frame (clutter-stage-view.c:1064)
by clutter_frame_clock_dispatch (clutter-frame-clock.c:405)
by frame_clock_source_dispatch (clutter-frame-clock.c:456)
by g_main_dispatch (gmain.c:3325)
by g_main_context_dispatch (gmain.c:4016)
by g_main_context_iterate.constprop.0 (gmain.c:4092)
by g_main_loop_run (gmain.c:4290)
by meta_run_main_loop (main.c:708)
by meta_run (main.c:723)
Block was alloc'd at
at malloc (vg_replace_malloc.c:307)
by g_malloc (gmem.c:106)
by g_slice_alloc (gslice.c:1025)
by g_slice_alloc0 (gslice.c:1051)
by g_type_create_instance (gtype.c:1839)
by g_object_new_internal (gobject.c:1939)
by g_object_new_valist (gobject.c:2264)
by g_object_new (gobject.c:1782)
by meta_input_device_native_new_virtual (meta-input-device-native.c:1365)
by meta_virtual_input_device_native_constructed (meta-virtual-input-device-native.c:705)
by g_object_new_internal (gobject.c:1979)
by g_object_new_valist (gobject.c:2264)
Suggested-by: Carlos Garnacho <carlosg@gnome.org>
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1529
Because clones may not have identical geometry to their source actors.
So we can't use the geometry of the source actor to decide to take the
more optimized (more clipped) path.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1480
The "paint" signal of ClutterActor is deprecated and will be removed. We
have a good replacement to get notified about stage paints nowadays,
that is "after-paint" on ClutterStage, so switch to that signal where it
makes sense.
I didn't bother to update the few tests (namely Clutters
conform/texture-fbo.c, conform/text-cache.c,
interactive/test-cogl-multitexture.c and Cogls
conform/test-multitexture.c, conform/test-texture-mipmaps.c) where it's
harder to replace the signal since we don't build those anyway.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1522
The paint-wrapper test wraps around the painting process of an actor to
paint its own texture before and after painting, it does that using the
"paint" signal.
This signal is deprecated and will be removed from Clutter, and since
this "use-case" won't be supported anymore afterwards (the proper way is
to use a ClutterEffect for things like this), remove the test.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1522
Rely on the seat stage, or other ways to fetch it. Also rely that
there is actually a single stage, so that we assign the right stage
to all events going out of the seat, in a single place.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
This is a bit scattered around, with the setter/getter in Clutter, and
it only being only directly honored in Wayland (it goes straight through
device properties in X11).
Make this private native API, and out of public ClutterInputDevice API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
Make the upper part agnostic about the device being relative in order
to avoid applying keep-aspect. The X11 bits already are, so make it
sure it's also the case for the native backend.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
The semantics for libinput events are not as expected here. Besides
it's pointless, as those should arrive per-slot in a burst, and we
cancel on the first event.
We can simply use the Clutter event for this.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
As it does seem from a read to libinput code, TOUCH_CANCEL events
actually do contain slot information, and are emitted per-slot.
This means we can avoid iterating over the slots ourselves, they
are still expected to be sent altogether.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
We want to coalesce multiple touch events into the same wl_touch.frame
event. Instead of poking internals to peek the touch events (and their
slots) coming at us before we handle them, simplify things by queueing
the event at a slightly lower priority than events, so we are ensured
to handle all pending input events before sending the event.
If there's no pending events, we can just send the frame event. As it
doesn't make sense to hold any longer.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
When malformed modes are provided and no valid mode spec is found, mutter
will eventually try to access the last element of an empty list. Warn about
this and exit properly.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1481
We will use a dedicated variable when transitioning to/from fullscreen state
and leave the previously used 'saved_rect' exclusively for transitioning
between floating and maximized state.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/801
Implements the "prior window window geometry dimensions" as described in
the documentation of 'xdg_toplevel' request 'unset_maximized':
"If available and applicable, the compositor will include the window
geometry dimensions the window had prior to being maximized in the
configure event."
and 'unset_fullscreen':
"The compositor may include the previous window geometry dimensions in
the configure event, if applicable."
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/792.
If this call is available, we can turn libX11 IO errors (fatal by definition)
into something we can recover from. Try to dispose all X11 resources and close
the display instead, so the compositor can survive the event.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1447
If the MetaX11Display abruptly closed when X11 windows were present,
we would still try to deal with them while freezing/thawing for the
"fade out" animation.
At the bottom of that, the X server may be gone, just try to cope
with it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1447
We're going to enforce some invariants a bit stricter and will only
allow allocating if an actor is mapped, not only visible.
Since actors are only mapped if their parent is mapped and stages are
hidden by default, we need to show the stage to ensure the actors are
mapped before we allocate them. So do that and call clutter_actor_show()
on the stage before fake-allocating the test actors.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
Bug 448183 fixed an issue with _NET_WM_MOVERESIZE_WINDOW not moving a
window by basing the resize on the current (new) rectangle instead of
the original rectangle.
While this fixes the issue with _NET_WM_MOVERESIZE_WINDOW, this also
causes windows with a size increment to move when the resize also
implies a move, such windows might drift while resizing.
Make sure to use the current rectangle for non-interactive resizes only.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/543
The XSizeHints set by X11 clients give a hint to the window manager
about size increment, aspect ratio, base, minimum and maximum size, etc.
When an X11 client changes those values, there is a good chance that it
will affect the actual window size in some way, and mutter rightfully
queue a window resize in that case.
However, mutter does not check if any of the hints have actually changed
and unconditionally queue a window resize whenever a client changes its
WM_NORMAL_HINTS property.
That can be a problem when a zealous client such as xterm decides to
update its WM_NORMAL_HINTS property on resize, because in return mutter
will queue a non-user driven resize in the middle of user-driven events,
hence defeating the purpose of the META_MOVE_RESIZE_USER_ACTION flag.
To avoid that issue, make mutter a bit smarter and avoid queuing a
window resize if the XSizeHints haven't actually changed.
https://gitlab.gnome.org/GNOME/mutter/-/issues/543
On interactive resize, mutter calculates the difference in size based on
the pointer location and relies on window constraints to ensure the
minimum size is honored.
Wayland however does asynchronous window configuration, meaning that not
checking for size hints early enough may lead to the window moving as
the locations was initially computed on a size which will be invalidate
by the client eventually.
Make sure to respect the client size hint on update_resize() so that we
don't end up with a window moving unexpectedly when the client
eventually acked the configuration.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1495
Many tablets have a native portrait mode panel, yet come with a keyboard dock,
where the device gets docked in landscape mode. To avoid the display being
on its side when mutter starts while the tablet is docked, we need to take
the accelerometer reported orientation into account even if there is a
tablet-mode-switch which indicates that the device is NOT in tablet-mode
(because it is docked).
Add special handling for the first time the "orientation-changed"
signal gets signalled by the orientation-manager, which happens after it
has successfully claimed the accelerometer with iio-sensor-proxy.
The added special handling of the initial "orientation-changed" signal
does a number of checks:
1. panel_orientation_managed is false because of the tablet-mode-switch and not
because of other reasons.
2. The device has a native portrait mode panel (and thus likely needs rotation
to display the image the right way up when docked).
If all these checks succeed then it continues with creating a new
monitors-config based on the orientation ignoring the panel_orientation_managed
value (for the initial/first "orientation-changed" signal only).
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
The orientation reported by the orientation_manager may have changed while
panel_orientation_managed was false. So when panel_orientation_managed
changes to true we should re-check the orientation.
This fixes the orientation not being correct when e.g. taking a 360 degree
hinges 2-in-1 in clamshell mode (so landscape orientation) and then folding
it into tablet mode while holding it in portrait orientation.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
Add support for the (mostly theoretical) case of an input-device
offering tablet-mode-switch functionality being unplugged.
This makes the has_tablet_switch handling identical to the has_touchscreen
handling, leading to more consistent code.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
Detect if a tablet-mode-switch device is already present when mutter
starts by checking for this from meta_seat_native_constructed. This
mirrors how we also set has_touchscreen from meta_seat_native_constructed.
This fixes tablet-mode-switches only being recognized when they are added
at runtime.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
Unconditionally setting has_touchscreen to check_touch_mode
when a new device gets added leads to has_touchscreen becoming
false when during runtime e.g. an USB keyboard gets plugged in.
Fix this by setting has_touchscreen to TRUE when check_touch_mode
is TRUE and leaving it alone otherwise.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
A first step towards abandoning the CoglObject type system: convert
CoglFramebuffer, CoglOffscreen and CoglOnscreen into GObjects.
CoglFramebuffer is turned into an abstract GObject, while the two others
are currently final. The "winsys" and "platform" are still sprinkled
'void *' in the the non-abstract type instances however.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1496
The spec states:
```
A sub-surface becomes mapped, when a non-NULL wl_buffer is applied
and the parent surface is mapped. The order of which one happens
first is irrelevant. A sub-surface is hidden if the parent becomes hidden,
or if a NULL wl_buffer is applied. These rules apply recursively
through the tree of surfaces.
```
In the past we relied on Clutter actor behaviour to realize the recursive
part - which then broke in
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/664
when we changed the actor hierachy in regards to subsurfaces.
Explicitly encode the desired behaviour in `MetaWaylandSubsurface`, fixing
the issue and making it future proof.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1384
Aligning windows manually with other windows has become less important
since the advent of tiling. This decreases the usefulness of edge
resistance, which in fact many users perceive as lag nowadays.
Account for that by limiting resistance to screen and monitor edges by
default, and only include windows when the control key is pressed.
https://bugzilla.gnome.org/show_bug.cgi?id=679609
Commit 033f0d11bf added a fallback in case the tile monitor wasn't
set before, but didn't actually check for a previously set value.
As a result, the "fallback" is not set unconditionally, which may
differ from the expected monitor: The tile monitor is determined
by the pointer position, while the window's monitor is the one
where the biggest part of the window resides on.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1389
It's pointless to call into functions that produce information that will
end up nowhere, so lets not. This will generate less angst when doing
more intense data gathering and string generation in debug log calls.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1467
The timestamp sent with _NET_WM_FRAME_DRAWN should be in "high
resolution X server timestamps", meaning they should have the same scope
as the built in X11 32 bit unsigned integer timestamps, i.e. overflow at
the same time.
This was not done correctly when mutter had determined the X server used
the monotonic clock, where it'd just forward the monotonic clock,
confusing any client using _NET_WM_FRAME_DRAWN and friends.
Fix this by 1) splitting the timestamp conversiot into an X11 case and a
display server case, where the display server case simply clamps the
monotonic clock, as it is assumed Xwayland is always usign the monotonic
clock, and 2) if we're a X11 compositing manager, if the X server is
using the monotonic clock, apply the same semantics as the display
server case and always just clamp, or if not, calculate the offset every
10 seconds, and offset the monotonic clock timestamp with the calculated
X server timestamp offset.
This fixes an issue that would occur if mutter (or rather GNOME Shell)
would have been started before a X11 timestamp overflow, after the
overflow happened. In this case, GTK3 clients would get unclamped
timestamps, and get very confused, resulting in frames queued several
weeks into the future.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1494
Mutter sends a proximity-in event before the required tablet tool
resource is properly allocated on the client. This is violating the
Wayland protocol. Because libwayland ignores events for objects it
doesn't know yet, this is not noticeable in most applications. However,
if https://gitlab.freedesktop.org/wayland/wayland/-/issues/176 gets
fixed, these applications would likely crash immediately. Therefore this
PR removes the responsible code which, again, shouldn't have any effect
on client applications as they ignore this event anyway.
Relevant part of the spec:
This event can be received when the tool has moved from one surface to
another, or when the tool has come back into proximity above the
surface.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1427
When we resize a window we send it configure requests with size
suggestion. Some clients, e.g. gnome-terminal will limit its size to a
discrete set given the font size resulting in the size often not being
respected completely, but used as a hint to find a size as large as
possible but not larger than the configured size.
When doing an interactive resize dragging the right or top side of a
window, this caused issues with the configured window size not matching
the one used by the client, as the configured position wouldn't be
correct for the actual size. Fix this by offsetting the position given
the size mismatch offset, making the position again in sync with the
size.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1447https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1477
Mutter still relies heavily on singletons such as its MetaBackend.
For that, the backend implementation has a meta_init_backend() function
which is called at startup from meta_init(), which creates the desired
backend and sets the singleton which is returned by meta_get_backend().
Unfortunately, that means that the backend is never actually freed, and
all the code from the backend finalize function never actually get
called.
Add a meta_release_backend() to free the backend singleton.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1438
The input settings constructor installs callback functions on device
added/remove and tool-changed.
However, on dispose, those signals are not disconnected, meaning that on
teardown, once the devices get removed eventually, the callback will
still fire and call the callback with freed data, causing a crash.
Make sure we clear the signals on devices on dispose, to avoid the crash
on teardown.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1438
A boring one, with the exception that row and column needed to be
swapped. For the sake of consistency, the variable names were also
synchronized with the values they hold, so e.g. xy → yx, etc.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
CoglMatrix already is a typedef to graphene_matrix_t. This commit
simply drops the CoglMatrix type, and align parameters. There is
no functional change here, it's simply a find-and-replace commit.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
Ideally, we would use Graphene to do that, however as of now Graphene
lacks these APIs so we still need these helpers. Since we're preparing
to get rid of CoglMatrix, move them to a separate file, and rename them
with the 'cogl_graphene' prefix.
Since I'm already touching the world with this change, I'm also renaming
cogl_matrix_transform_point() to cogl_graphene_matrix_project_point(),
as per XXX comment, to make it consistent with the transform/projection
semantics in place.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
During seat initialization, we process early libinput events (adding all known
devices) before the seat gets a stage assigned. This causes warnings when trying
to handle the corresponding CLUTTER_DEVICE_ADDED events, as they are sent
stageless.
As it is definitely too soon to have those events sent meaningfully, filter
those events out and instead handle the CLUTTER_DEVICE_ADDED emission for all
known devices after the seat receives an stage. This makes the events guaranteed
to be emitted early in initialization, but not so soon that they can't be
handled yet.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1472
Mutter itself is versioned now, so passing the version information
to the plugin is redunant now: The version is already determined by
linking to a particular API version (gnome-shell) or by installing
to a versioned plugin path (external plugins).
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1473
A Meta.WaylandClient() object has a GSubprocessLauncher object
passed externally. Currently this object is kept while the
WaylandClient object exists, but is is only needed until the call
to spawn is made.
This patch frees that GSubprocessLauncher just after that call,
thus freeing those resources.
Fix https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1462
This reverts the commits 372d73e275 and 1d20045247 - the special
case for alpha-less textures could only happen on Wayland, but now
the opaque region is also set in those cases.
This commit saves us some allocations, simplifies the logic a bit and
makes sure culling uses the same opaque region as our painting paths.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1463
Wayland clients using buffers without alpha channel are not expected to
set an opaque region. However, we rely on the opaque region for the fast
painting path in `MetaShapedTexture`.
Thus, make sure to always set an opaque region internally in those cases.
For X11 clients, wo do so already.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1463
Just like we used to before 30809665d8.
Because in some cases `clip_region` is able to shave off an extra pixel
from the edge of the redraw rectangle(s). And not shaving that off was
making the background rendering inconsistent with shaped-texture, causing
occasional off-by-one artefacts. Now both shaped-texture and
background-content agree on the clip region again that doesn't happen.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1443https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1464
This is essentially a revert of
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/326. This commit
had the unintended side effect that the built sources are actually
rebuilt for every individual user of libmutter_dep. With there being more
tests and generated files, the number of targets to build is increasing
squarely.
Not doing this reduces the number of targets from 2044 to 874, thus
saving man hours and CI burnt cycles in the long run. There's the slight
risk of reintroducing the random build breaks, but mutter is essentially
doing as suggested at https://github.com/mesonbuild/meson/issues/1084
(the only difference being addressed in the previous commit), so meson
ought to behave as expected.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1458
We only update the last device from actual input interaction here,
avoid this pair of events. This is specially nasty with
CLUTTER_DEVICE_REMOVED, since the device we're notifying upon will be
disposed soon after emission.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1460
Like it's done for the pointer in other places. Without a stage assigned,
some bits (like IM handling) may end up with events ignored, and misbehave.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1413
The Meta.WaylandClient constructor receives a GSubprocessLauncher
as a parameter, and stores it internally. Unfortunately, its
refcount value isn't increased, which results in the object being
released twice.
This patch fixes this bug.
Fix https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1454
When a MetaBarrier is first created it allocates a backend
impl object which does the actual heavy lifting.
Unfortunately, that backend object is never freed.
This commit ensures the implementation gets freed when
the barrier object is freed.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1451
meta_barrier_destroy is responsible for removing the extra
reference added in meta_barrier_constructed.
Unfortunately, it fails to do this because of a misplaced early
return statement.
This commit removes the spurious return.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1449
This is already taken care of in meta_backend_monitors_changed(), called
from the same code paths that emit ::monitors-changed-internal. It is
better to leave this up to backend internals.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1448
We only did this if we weren't currently doing an interactive resize,
but since the finish_move_resize() is not the actual interactive resize
but the acknowledgment of the configure event that was emitted as a
result, we shouldn't limit ourself to the same flags used during resize.
This fixes temporarly "stuck" position of attached modal dialogs while
they are being resized.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1163https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1446
In X, buttons 1, 2, 3 are left, middle, right. In evdev, the order is
BTN_LEFT, BTN_RIGHT, BTN_MIDDLE. So setting a scroll button to 2 gave us a
middle button in the X session and a right button in a wayland session.
Fix that by hard-coding the LMR buttons handling.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1433
Even when a direct client buffer has a compatible format, stride and
modifier for direct scanout, drmModePageFlip() may still fail sometimes.
From testing, it has been observed that it may seemingly randomly fail
with ENOSPC, where all subsequent attempts later on the same CRTC
failing with EBUSY.
Handle this by falling back to flipping after having composited a full
frame again.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1410
If there is no laptop panel (for example on a desktop PC or a virtual
machine), attempting to put a NULL monitor in the list of matches
will just make mapping_helper_apply() crash.
Mitigates: https://gitlab.gnome.org/GNOME/mutter/-/issues/1414
Signed-off-by: Simon McVittie <smcv@debian.org>
It's enabled by default when using the i915 driver, but disabled
everywhere else until it can be made reliably an improvement. Until
then, for anyone want to force-enable it, add the string
'dma-buf-screen-sharing' to the experimental features list in GSettings.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1442
Seems DMA buffer based interprocess buffer sharing is more broken than
not, so for now only enable it when using the i915 driver.
For example vmwgfx, qxl and radeon, it results in mmap() failing to mmap the
memory region. Other drivers, e.g. amdgpu will function, but may hit
very slow memory download paths, resulting in worse performance.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1442
We only want the panel autorotation to happen if the laptop has an
accelerometer, and is in tablet mode. Regular laptop mode should
lock the orientation, and let it be configured manually.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1311
So far, we've expected this signal to not happen whenever autorotation
shouldn't apply (no accelerometer is a strong reason). In future commits
we'll add further checks to this policy, so prevent autorotation to
change the display configuration if the MetaOrientationManager signal
happens but it should be ignored.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1311
Instead of having everyone check net.hadess.SensorProxy themselves, have
this all controlled by the MetaOrientationManager, and proxied everywhere
else via a readonly property in org.gnome.Mutter.DisplayConfig.
We want to attach more complex policies here, and it seems better to
centralize the handling of the autorotation feature rather than
implementing policy changes all over the place.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1311
We used to pick the "best" output for each builtin/size/edid categories,
and then pick the "best" (in that order) of those for each input device.
This is most often enough, but is prone to wrong results in some corner
cases (eg. 2 outputs with the exact same dimensions).
Change this to a score mechanism that doesn't leave outputs out. The
weights are the same, but the score is accumulated if an output matches
multiple categories. All outputs are evaluated and sorted by score, and
input devices with the best matches are applied first (as they already
did).
This should break the tie if eg. there's 2 outputs with similar dimensions,
but one of them has some EDID match in addition. The output with multiple
matches will score higher up, while it might have been entirely discarded
with the previous implementation.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1175https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1202
The work at https://gitlab.gnome.org/GNOME/gnome-control-center/issues/239
intended to make integrated devices optionally mappable to other outputs
(in order to allow fix mishandling from our heuristics, or to quickly reach
things in other monitor without changing devices).
This was missed in that plan, we do allow cycling outputs, but we still did
prevent it from doing anything for integrated devices. Fix that, and change
output cycling so we don't allow a "NULL" EDID for integrated devices, this
makes those go through the MetaInputMapper (resulting in one output listed
twice), instead of mapping to the full stage.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1186https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1201
The cursor tracker may give us a valid position, and a
valid cursor sprite, and yet the cursor can be hidden,
meaning we must hide the cursor on the stream as well.
Remove cursor from stream buffer if it's hidden.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1421
Scanouts are taken away after painting. However, when we're
streaming, what we actually want is to capture whatever is
going to end up on screen - and that includes the scanout
if there's any.
Add a before-paint watch that only records new frames if a
scanout is set.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1421
When there's a direct scanout set in the stage view, we
have to use it instead of the view's regular onscreen
framebuffer.
Use the new CoglScanout API to implement blitting to the
stream framebuffer.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1421
This will be used when screencasting monitors so that if
there's scanout in place, it'll still be possible to blit
it to a PipeWire-owned framebuffer, and stream it.
Add a new 'blit_to_framebuffer' vfunc to CoglScanout, and
implement it in MetaDrmBufferGbm.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1421
Just because X11/XI uses a particular terminology doesn't mean we
have to use the same terms in our own API. The replacement terms
are in line with gtk@1c856a208, which seems a better precedent
for consistency.
Follow-up to commit 17417a82a5.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1425
Using opaque painting paths can have a big impact on painting performance.
In order to easily validate whether we use the opaque paths, add a opaque
(green) or blended (purple) overlay over painted areas if the
`META_DEBUG_PAINT_OPAQUE_REGION` `MetaDebugPaintFlag` is set.
You can do so in `lg` via:
`Meta.add_debug_paint_flag(Meta.DebugPaintFlag.OPAQUE_REGION)`
This can be helpful for application developers, as previously it was not
trivial to check whether e.g. Wayland or X11 opaque regions where
properly set.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1372
Analogous to `ClutterDrawDebugFlag` but intended for concepts that
are not present in Clutter, such as Wayland/X11 opaque regions.
Also add the first flag for the later.
To set the flag, run:
`Meta.add_debug_paint_flag(Meta.DebugPaintFlag.OPAQUE_REGION)`
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1372
This is no longer directly related to DBus messages, but our own event
queue. Change the wording and use CLUTTER_PRIORITY_EVENTS to make it
bolder, even though it's the same than G_PRIORITY_DEFAULT.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1286
We set an idle to coalesce multiple IM events together, as the protocol
requires us to send them in one frame, and unfortunately there is no
idea about whether more IM events are upcoming.
One good hint though are key events generated from the IM, we want to
apply all IM changes before the key event is processed, so make it sure
that the .done event is flushed before the key event is handled.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1286
The clutter_input_focus_filter_key_event() function has been made
a more generic filter_event(). Besides its old role about letting
key events go through the IM, it will also process the IM events
that are possibly injected as a result.
Users have been updated to these changes.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1286
When in the overview culling via `self->clip_region` is unavailable.
The region is `NULL` because the paint call has not originated from a
`WindowGroup`, because the overview does not use `WindowGroup`.
So the main wallpaper was being painted in full while in the overview.
That's a waste of effort because `redraw_clip` is going to be used to
stencil/scissor out only the parts that are changing. We don't need to
paint *most* of the wallpaper, only the parts behind anything changing.
For the overview this reduces GPU power usage (intel_gpu_top) roughly
10% and reduces render times almost as much.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1363
`meta_background_content_paint_content` was mixing two different
coordinate systems in `actor_pixel_rect`. It was initialized with
actor-local coordinates and then `if (self->clip_region)` would be
treated as stage coordinates. This worked because `self->clip_region`
was only non-NULL outside of the overview where both coordinate systems
were the same. So it always got the right answer, possibly by accident.
In order to enhance the function however we will need to know which
coordinate system we're working in, so now we make it explicit.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1363
There's no need to update the outputs recursively in case the actor gets
mapped or unmapped. That's because mapping happens recursively itself,
so if a window with multiple subsurfaces is shown, all subsurfaces will
receive a "notify::mapped" signal.
Since this was the only remaining user of
meta_wayland_surface_update_outputs_recursively(), we can now remove
that function.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
Since we now listen to the "stage-views-on-changed" signal (which
"catches" all the changes we want) on MetaWaylandActorSurfaces for
updating the wl_outputs the surface is on, we no longer need to call
meta_wayland_surface_update_outputs_recursively() on all geometry
changes, so remove that signal handler.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
ClutterActors new "stage-views-changed" signal fits pretty well for the
updating of wl_outputs a MetaWaylandActorSurface is on: With that signal
we get notified if the surface moved to a different CRTC, of which every
output has at least one.
So start listening to that signal, which fixes a bug where the wl_output
of a surface changes, but its allocation remains the same (which means
no signals triggering an update of the outputs will be emitted) and no
enter/leave events for the new wl_outputs are sent to the client. This
can happen when a monitor is hotplugged but the new allocation is
exactly the same as the old one even though it's on a different monitor.
Since the "stage-views-on-changed" signal will also get emitted when a
parent actor of the surface is moved, this means we can now remove the
call to meta_wayland_surface_update_outputs_recursively() on window
position changes or the completion of window-effects.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
QXL doesn't support mmap():ing a DMA buffer allocated in mutter inside
the PipeWire stream consumer process. To make screen casting work again
on QXL, disable DMA buffer based screen casting for QXL.
Eventually, it should be the client that renegotiates the supported
buffer types, but until then we need this list.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1318
The X server, including Xwayland, can be compiled with different X11
extensions enabled at build time.
When an X11 extension is built in the X server, it's usually also
enabled at run time. Users can chose to disable those extensions at run
time using the X server command line option "-extension".
However, in the case of Xwayland, it is spawned automatically by the
Wayland compositor, and the command line options are not configurable
by users.
Add a new setting to disable a selected set of X extension in Xwayland
at startup, without needing to rebuild Xwayland.
Of course, if Xwayland is not built with a given extension support in
the first place (which is the default for the security extension for
example), that option has no effect.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1405
Delay the addition and removal of devices using ClutterDeviceEvent's so that
they are processed following the libinput event order, and that we don't
have to flush the events on removal.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1371
When a device is removed from the seat the events that this device may have
emitted just before being removed might still be in the stage events queue,
this may lead a to a crash because:
Once the device is removed, we dispose it and the staling event is
kept in queue and sent for processing at next loop.
During event processing we ask the backend to update the last device
with the disposed device
The device is disposed once the events referencing it, are free'd
The actual last device emission happens in an idle, but at this point
the device may have been free'd, and in any case will be still disposed
and so not providing useful informations.
To avoid this, once a device has been added/removed from the seat, we queue
ClutterDeviceEvent events to inform the stack that the device state has
changed, preserving the order with the other actual generated device events.
In this way it can't happen that we emit another event before that the
device has been added or after that it has been removed.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1345
When removing a device that has been just marked as the last in use, we may
try to notify that a NULL device is the last one.
This is not supported, as both update_last_device() and the clients of the
"::last-device-changed" signal are assuming that the last device is always
a valid ClutterInputDevice.
So let's avoid erroring, and stop the idle when clearing the current device.
Related to: https://gitlab.gnome.org/GNOME/mutter/-/issues/1345https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1371
A GAppInfo is not guaranteed to have a filename or an application (or
rather a desktop ID). Add a check for application_id to be non-NULL
before trying to call sn_launcher_set_application_id, which would crash
otherwise.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1392
PipeWire reuses buffers, and buffer metadatas, when streaming. When
the cursor is moved to outside the stream, the cursor meta also needs
to be updated, otherwise it'll use the cursor position of whatever is
in the buffer.
Don't bail out when cursor is outside the stream, and ensure to record
a metadata-only frame. This only applies to metadata streams.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1417
If we returned early in one of the checks but already assigned the
surface role, we'd later run into a double-free and crash. Just do
the checks at the beginning.
Also add a missing return statement that was left out in commit
88ff196fe3 and tighten the parent surface check.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1415
The spec allows `parent_resource` to be `NULL`, requiring the parent
surface to get specified by some other protocol. Send a protocol error
with some meaningful explanation instead of crashing.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1408
Currently, the maximum size for a mouse pointer bitmap for screen
casting is 64x64 pixels.
However, this limit is hit way too often as it is way too low and
results in crashes in either gnome-remote-desktop or mutter.
For example: The a11y settings in g-c-c allow setting a larger pointer
bitmap in order to increase the visibility of the mouse pointer.
With the current limit of 64x64 pixels it is not possible to use the
larger variants of the default mouse pointer bitmap, without
experiencing any crash.
Another way to hit the limit is when display scaling is used or some
game uses a custom (large) mouse pointer bitmap.
The VNC backend in gnome-remote-desktop does not seem to have a maximum
pointer bitmap size.
The RDP backend on the other hand has a maximum pointer bitmap size at
384x384.
Use this size (384x384) as maximum size instead of the current 64x64
size for mouse pointer bitmaps to avoid crashes in mutter and
gnome-remote-desktop and to ensure that bigger mouse pointer bitmaps
can be used.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1414
It is linear config manager created when ensuring configuration.
However, the switch config is not set as LINEAR, but left as UNKNOWN.
This leads switch mode OSD always shows "Join Displays" icon, rather
than the next icon which is "External Only" after connect an external
display and press Super+P once at first time since mutter starts.
This patch moves switch config setting into
meta_monitor_config_manager_create_linear() (and the sibling functions)
to well prepare the monitors config and avoid missing settings.
This is a regression introduced by 149e4d6934.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1362
Clients can set minimum and maximum to identical values to indicate a
fixed-size window. A compositor can ignore these requests and thus a client
has to ensure these limits.
To support clients that do not ensure these size limits by themselves and
to skip unnecessary function calls, we will prevent resizing requests by
the client if a fixed-size has been requested.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1331
We're moving towards not supporting stand-alone application style
clutter stages, meaning the stage tests use will be reused instead of
recreated. To make this feasable, tests must clean up after themself.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
meta_run() is still left intact and does the same as before; the new
functions are only intended to be used by tests, as they may need to set
things up after starting up. Doing so linearly in the test case is much
easier than adding callbacks, so meta_run() is split up to make this
possible.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
The delete event was used for signalling the close button was clicked on
clutter windows. Being a compositor we should never see these, unless
we're running nested. Remove the plumbing of the DELETE event and just
directly call meta_quit() when we see it, if we're running nested.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
We checked if we were using the usig the X11 backend to decide when to
deal with a11y event posting - in order to make the clutter code less
windowing system dependent, make this check a check whether we're a
display server or not, in contrast to a window/compositing manager
client. This is made into a vfunc ot ClutterBackendClass, implemented by
MetaClutterBackendNative and MetaClutterBackendX11.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
Test that if a timeline got its frame clock from a parent of the
associated actor, if that actor moves across the stage so that the stage
views changes and thus the would be picked frame clock too, this is
noticed by the timeline so that it also changes to the correct frame
clock.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
Timelines where the frame clock was picked from a parent of the
associated actor didn't get notified about any stage views changes, as
it only listened on the associated actor. If that actor didn't actually
get its stage views changed (because it went from empty to empty), we'd
end up with a stale frame clock, leading to crashes.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
Flip flop resize, which is the result of respecting ConfigureNotify
makes test annoyingly racy, as one cannot do
clutter_actor_set_size (stage, 1024, 768);
wait_for_paint (stage);
g_assert_assert (clutter_actor_get_width (stage) == 1024);
The reason for this is any lingering ConfigureNotify event that might
arrive in an inconvenient time in response to some earlier resize.
In order to not risk breaking any current behavior in the X11 CM case
(running as a compositing window manager), only avoid changing the stage
size in response to ConfigureNotify when running nested.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
This aims to make sure a view and its resources are destroyed when it
should. Using references might keep certain components (e.g frame clock)
alive for too long.
We currently don't take any long lived references to the stage view
anywhere, so this doesn't matter in practice, but this may change, and
will be used by a to be added test case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
Just as wl_shm, hook up the Wayland DMA-BUF protocol to the 64 bit half
point pixel formats too. This makes it possible for Wayland EGL clients
to use 64 bit pixel EGL configurations.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/804
Now that cogl understands them, hook wl_shm up so they can be used.
This also bumps the wayland-server version dependency to 1.17.90, which
corresponds to the master branch of wayland. The new formats will be
available in 1.18.0.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/804
Without doing this, we'd use the same sprite that was last set by
mutter, most likely a leftptr cursor, and fail to update when e.g.
moving the pointer above a text entry and the displayed cursor updated
to a cursor position marker.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
The displayed cursor is the one displayed on the screen, e.g. via the
hardware cursor plane, by Xorg, or using the stage overlay.
When screen recording under X11, we don't get a stream of pointer and
cursor updates, as they might be grabbed by some other client. Because
of this, the cursor tracker or cursor renderer are not kept up to date
with positional and cursor state.
To be able to use the stage overlays when recording, we need to be able
to update the overlay without updating the displayed cursor, as we
shouldn't update the X server with cursor state we just retrieved from
it.
Thus, to achieve this, create a separate overlay cursor pointer. When
being a display server, they are always the same, but when using X11,
during screen recording, the overlay one will be polled at a fixed
interval to get a somewhat up to date state.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
Always force-track the cursor position (so that the X11 backend can keep
it up to date), and if the cursor wasn't part of the sampled
framebuffer when reading pixels into CPU memory, draw it in an extra
pass using cairo after the fact. The cairo based cursor painting only
happens on the X11 backend, as we otherwise inhibit the hw cursor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
On X11 we won't always receive cursor positions, as some other client
might have grabbed the pointer (e.g. for implementing a popup menu). To
make screen casting show a somewhat correct cursor position, we need to
actively poll the X server about the current cursor position.
We only really want to do this when screen casting or taking a
screenshot, so add an API that forces the cursor tracker to track the
cursor position.
On the native backend this is a no-op as we by default always track the
cursor position anyway.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
Only when the cursor isn't handled by the backend is the overlay made
visible. This is intended to be used when painting the stage to an
offscreen using clutter_stage_paint_to_(frame)buffer() in a way where
the cursor is always included.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
Detect displays marked as 'non-desktop' by the kernel and skip them when
creating the outputs. Mutter is not able to render images that are shown
properly on those devices anyway.
This avoids lighting up attached VR HMDs and showing the GDM login
screen between the eyes in a VR HMD instead of on the monitor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1393
Allowing code from inside mutter to create a child process and
delegate on it some of its tasks is something very useful. This can
be done easily with the g_subprocess and g_subprocess_launcher classes
already available in GLib and GObject.
Unfortunately, although the child process can be a graphical program,
currently it is not possible for the inner code to identify the
windows created by the child in a secure manner (this is: being able
to ensure that a malicious program won't be able to trick the inner
code into thinking it is a child process launched by it).
Under X11 this is not a problem because any program has full control
over their windows, but under Wayland it is a different story: a
program can't neither force their window to be kept at the top (like a
docker program does) or at the bottom (like a program for desktop icons
does), nor hide it from the list of windows. This means that it is not
possible for a "classic", non-priviledged program, to fulfill these
tasks, and it can be done only from code inside mutter (like a
gnome-shell extension).
This is a non desirable situation, because an extension runs in the
same main loop than the whole desktop itself, which means that a
complex extension can need to do too much work inside the main loop,
and freeze the whole desktop for too much time. Also, it is important
to note that javascript doesn't have access to fork(), or threads,
which means that, at most, all the parallel computing that can do is
those available in the _async calls in GLib/GObject.
Also, having to create an extension for any priviledged graphical
element is an stopper for a lot of programmers who already know
GTK+ but doesn't know Clutter.
This patch wants to offer a solution to this problem, by offering a
new class that allows to launch a trusted child process from inside
mutter, and make it to use an specific UNIX socket to communicate
with the compositor. It also allows to check whether an specific
MetaWindow was created by one of this trusted child processes or not.
This allows to create extensions that launch a child process, and
when that process creates a window, the extension can confirm in a
secure way that the window really belongs to that process
launched by it, so it can give to that window "superpowers" like
being kept at the bottom of the desktop, not being listed in the
list of windows or shown in the Activities panel... Also, in future
versions, it could easily implement protocol extensions that only
could be used by these trusted child processes.
Several examples of the usefulness of this are that, with it, it
is possible to write programs that implements:
- desktop icons
- a dock
- a top or bottom bar
...
all in a secure manner, avoiding insecure programs to do the same.
In fact, even if the same code is launched manually, it won't have
those privileges, only the specific process launched from inside
mutter.
Since this is only needed under Wayland, it won't work under X11.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/741
Intended to be used to pass state from screen cast clients down the
line. The first use case will be a boolean whether a screen cast is a
plain recording or not, e.g. letting the Shell decide whether to use a
red dot as the icon, or the generic "sharing" symbol.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1377
GLib will now be linking against sysprof-capture-4.a. To support that,
sysprof had to remove the GLib dependency from sysprof-capture-4 which
had the side-effect of breaking ABi.
This bumps the dependency and includes a fallback to compile just the
libsysprof-capture-4.a using a subproject wrap.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1352
Commit 510cbef15a changed the logic in `handle_update()` for X11 window
actors to return early if the surface is not an X11 surface.
That works fine for plain Xorg, but on Xwayland, the surface is actually
a Wayland surface, therefore the function returns early before updating
the drop shadows of server-side decorations for X11 windows.
Change the test logic to restore drops shadows with Xwayland windows.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1384
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1358
The memory selection source was only providing the "text/plain" or the
"text/plain;charset=utf-8" mimetype, but not "STRING" or "UTF8_STRING",
which some X11 clients, like wine, are looking for. This was breaking
pasting from the clipboard in wine applications.
Fix this by adding those targets when they are missing and the selection
source provides the corresponding mimetypes.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1369
Wine destroys its old selection window immediately before creating a new
selection. This would trigger restoring the clipboard, which would
overwrite the new selection with the old one. The selection window
however can also be destroyed as part of the shutdown process of
applications, such as Chromium for example. In those cases we want the
clipboard to be restored after the selection window has been destroyed.
Solve this by not immediately restoring the clipboard but instead using
a timeout which can be canceled by any new selection owner, such as in
the Wine case.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1338https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1369
The new "id" properties for the MetaCrtc* and MetaOuput* objects are 64-bit
values, so take care to pass 64-bit values when calling g_object_new.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1343.
When using its EGLStream-based presentation path with the proprietary NVIDIA
driver, mutter will use a different function to process page flips -
custom_egl_stream_page_flip. If that fails due to an EBUSY error, it will
attempt to retry the flip. However, when retrying, it unconditionally uses the
libdrm-based path. In practice, this causes a segfault when attempting to
access plane_assignments->fb_id, since plane_assignments will be NULL in the
EGLStream case. The issue can be reproduced reliably by VT-switching away from
GNOME and back again while an EGL application is running.
This patch has mutter also use the custom page flip function when retrying the
failed flip.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1375
Instead of blindly hoping that `$INCLUDE` contains the parent directory
of `gsettings-desktop-schemas`.
Because `gsettings-desktop-schemas.pc` says:
```
Cflags: -I/SOME/DIRECTORY/gsettings-desktop-schemas
```
Which means to include the version that Meson has configured you need
to drop the directory prefix and only `#include <gdesktop-enums.h>`.
This fixes a build failure with local installs triggered by 775ec67a44
but it's also the right thing to do™.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1370
During animation or other things that cause multiple frames in a row
being painted, we might skip recording frames if the max framerate is
reached.
Doing so means we might end up skipping the last frame in a series,
ending with the last frame we sent was not the last one, making things
appear to get stuck sometimes.
Handle this by creating a timeout if we ever throttle, and at the time
the timeout callback is triggered, make sure we eventually send an up to
date frame.
This is handle differently depending on the source type. A monitor
source type reports 1x1 pixel damage on each view its monitor overlaps,
while a window source type simply records a frame from the surface
directly, except without recording a timestamp, so that timestamps
always refer to when damage actually happened.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1361
Now that we don't use the record function to early out depending on
implicit state (don't record pixels if only cursor moved for example),
let it simply report an error when it fails, as we should no longer ever
return without pixels if nothing failed.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1361
Both do more or less the same but with different methods - one puts
pixels into a buffer using the CPU, the other puts pixels into a buffer
using the GPU.
However, they are behaving slightly different, which they shouldn't.
Lets first address the misleading disconnect in naming, and later we'll
make them behave more similarly.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1361
That was obviously always the intention, but it didn't work when the
display was scaled. My 3840x2160 monitor with a 3840x2160 texture was
being rendered with LINEAR filtering.
It seems the `force_bilinear` flag was TRUE when it should be FALSE.
Because a texture area that's an integer fraction of the texture
resolution is still a perfect match when that integer is the monitor
scale. We were also getting:
`meta_actor_painting_untransformed (fb, W, H, W, H, NULL, NULL) == FALSE`
when the display was scaled. Because the second W,H was not the real
sampling resolution. So with both of those issues fixed we now get
NEAREST filtering when the texture resolution matches the resolution it's
physically being rendered at.
Note: The background texture actually wasn't equal to the physical monitor
resolution prior to January 2020 (76240e24f7). So it wasn't possible to do
this before then. Since then however, the texture resolution is always
equal to the physical monitor resolution.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1346
It doesn't take all children - subsurfaces in this case - into
account, thus creating glitches if subsurfaces extend outside
of the toplevel surface.
Further more it doesn't seem to serve any special purpose - it was
added in f7315c9a36, a pretty big commit, and no discussion was
started about the code in question. So it was likely just overlooked
in the review process.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/873
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1316
gnome-shell displays workspace previews at one tenth scale. That's a
few binary orders of magnitude so even using a LINEAR filter was
resulting in visible jaggies. Now we apply mipmapping so they appear
smooth.
As an added bonus, the mipmaps used occupy roughly 1% the memory of
the original image (0.1 x 0.1 = 0.01) so they actually fit into GPU/CPU
caches now and rendering performance is improved. There's no need to
traverse the original texture which at 4K resolution occupies 33MB,
only a 331KB mipmap.
In my case this reduces the render time for the overview by ~10%.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/1416https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1347
The frame clock owner should be able to explicitly destroy (i.e. make
defunct) a frame clock, e.g. when a stage view is destructed. This is so
that other objects can keep reference to its without it being left
around even after stopped being usable.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Currently there is a point in between hot plug, and when the stage view
list is up to date. The check also tests for this behaviour; would this
ever change, the test should be adapted to deal with this too.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Replace the default master clock with multiple frame clocks, each
driving its own stage view. As each stage view represents one CRTC, this
means we draw each CRTC with its own designated frame clock,
disconnected from all the others.
For example this means we when using the native backend will never need
to wait for one monitor to vsync before painting another, so e.g. having
a 144 Hz monitor next to a 60 Hz monitor, things including both Wayland
and X11 applications and shell UI will be able to render at the
corresponding monitor refresh rate.
This also changes a warning about missed frames when sending
_NETWM_FRAME_TIMINGS messages to a debug log entry, as it's expected
that we'll start missing frames e.g. when a X11 window (via Xwayland) is
exclusively within a stage view that was not painted, while another one
was, still increasing the global frame clock.
Addititonally, this also requires the X11 window actor to schedule
timeouts for _NET_WM_FRAME_DRAWN/_NET_WM_FRAME_TIMINGS event emitting,
if the actor wasn't on any stage views, as now we'll only get the frame
callbacks on actors when they actually were painted, while in the past,
we'd invoke that vfunc when anything was painted.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/903
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
This also changes the view construction path used by the renderer view
to use the new 'add_view()' function, meaning we have a common entry
point for views into the renderer, which will be useful later on.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Before we'd create the view in init(), then continue poking at it in
realize(). Move all of the screen stage view initialization to
realize(), as that's when we have all the dependent state available.
This is possible since there is nothing needing it until realizing.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The repaint callbacks are not tied to repaint, thus a bit misleading.
What the functionality in the pre/post-paint callbacks here cares about
is when actually painting; the non-painting related parts has already
moved out to a *-update signal.
This also renames the related MetaWindowActorClass vfuncs, to align with
naming convention of the signals that it listens to.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Instead of going via MetaCompositor to know about when we updated
(confusingly named post-paint), use the new stage signal directly.
Note that this doesn't change the time frame callbacks are dispatched;
it's still not tied to actual painting even though it seemed so before
given the function names.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The clutter "thread" repaint callback are not tied to painting, but
indirectly to updating. What the cursor renderer cares about is when we
actually painted, as this is related to the OpenGL fallback paths.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
We'd emit multiple "presented" signals per frame, one for "sync" and one
for "completion". Only the latter were ever used, and removing the
differentiation eases the avoidance of cogl onscreen framebuffer frame
callback details leaking into clutter.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The vfunc was not tied to "paint", but was used by MetaWindowActorX11
as part of the "update" mechanisms. In order to make that more clear,
special case it in MetaWindowActorX11 by type checking the surface
actor, handling the case without MetaSurfacActor abstraction.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The synchronization must happen no matter the painting, as it in itself
might result in reported damage, making the stage actually painted. Thus
move it out of the "pre-paint" handler, to something explicitly not tied
to the painting itself - ClutterStage::before-update.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Instead of the 'pre-paint' signal on MetaCompositor, rely directly on
the 'before-update' signal on the stage. A reason for this is that the
callback should not only invoked in connection to painting, but updating
in general. Currently the 'pre-paint' signal is emitted no matter
whether there were any painting or not, but that's both misleading and
will go away.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The mutexes was used by ClutterTexture's async upload and to match GDK's
mutexes on X11. GDK's X11 connection does not share anything with
Clutter's, we don't have the Gdk Clutter backend left, and we have
already removed ClutterTexture, so lets remove these mutexes as well.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
A frame clock dispatch doesn't necessarily result in a frame drawn,
meaning we'll end up in the idle state. However, it may be the case that
something still requires another frame, and will in that case have
requested one to be scheduled. In order to not dead lock, try to
reschedule directly if requested after dispatching, if we ended up in
the idle state.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The native backend had a plain counter, and the X11 backend used the
CoglOnscreen of the screen; change it into a plain counter in
ClutterStageCogl. This also moves the global frame count setting to the
frame info constuctor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
We currently have mutter set a global frame counter on the frame info in
the native backend, but in order to do this from clutter, change the
frame info construction from being implicitly done so when swapping
buffers to having the caller create the frame info and passing that to
the swap buffers call.
While this commit doesn't introduce any other changes than the API, the
intention is later to have the caller be able to pass it's own state
(e.g. the global frame count) along with the frame info.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
We had time unit conversion helpers (e.g. us2ms(), ns2us(), etc) in
multiple places. Clean that up by moving them all to a common file. That
file is clutter-private.h, as it's accessible by both from clutter/ and
src/.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Currently unused, but it's intention is to use as a initial refresh rate
for a with the stage view associated frame clock. It defaults to 60 Hz
if nothing sets it, but the native backend sets it to the associated
CRTCs current mode's refresh rate.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Without an associated actor, or explicit frame clock set, in the future
a timeline will not know how to progress, as there will be no singe
frame clock to assume is the main one. Thus, deprecate the construction
of timelines without either an actor or frame clock set.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The MetaLater functionality needs to make sure an update is scheduled so
that it can run its callbacks etc. This used a ClutterTimeline (which is
an object more or less meant to drive animations markers, frames etc)
just to keep the master frame clock running. We're moving away from a
single master clock, so just schedule updates directly instead, with the
newly exposed API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
We'd check if there was any queued redraw on the stage, but this is
inappropriate for two reasons:
1) A monitor and area screen cast source only cares about damage on a
subset of the stage.
2) The global pending-redraw is going away when paint scheduling will be
more view centric.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The timestamp comes from the GSource, meaning it's a more accurate
representation of when the frame started to be dispatched compared to
getting the current time in any callback.
Currently unused.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
In certain scenarios, the frame clock needs to handle present feedback
long before the assumed presentation time happens. To avoid scheduling
the next frame to soon, avoid scheduling one if we were presented half a
frame interval within the last expected presentation time.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
This adds a current unused, apart from tests, frame clock. It just
reschedules given a refresh rate, based on presentation time feedback.
The aiming for it is to be used with a single frame listener (stage
views) that will notify when a frame is presented. It does not aim to
handle multiple frame listeners, instead, it's assumed that different
frame listeners will use their own frame clocks.
Also add a test that verifies that the basic functionality works.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
When a transition is created for the allocation change, it will delay
the new allocation box getting set depending on transition details.
This, however, means that e.g. the 'needs_allocation' flag never gets
cleared if a transition is created, causing other parts of the code to
get confused thinking it didn't pass through a layout step before paint.
Fix this by calling clutter_actor_allocate_internal() with the current
allocation box if a transition was created, so that we'll properly clear
'needs_allocation' flag.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1345
41130b08eb added a fix for culling subsurfaces with geometry scale.
Unfortunately it only did so for the opaque regions, not for clip and
unobscured regions, as the effect was hidden by bug that was only
fixed by 3187fe8ebc.
Apply the same fix to clip and unobscured regions and use the chance
to move most of the slightly hackish geometry scale related code
into a single place.
We need to scale slightly differently in the two cases, indicated by
the new `ScalePerspectiveType` enum, as the scale is dependent on the
perspective - once from outside, once from inside of the scaled actor.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1312
Since we now always return a resource scale, we can remove the boolean
return value from clutter_actor_get_resource_scale() and
_clutter_actor_get_real_resource_scale(), and instead simply return the
scale.
While at it, also remove the underscore from the
_clutter_actor_get_real_resource_scale() private API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1276
Add private API to ClutterBackend to set a fallback resource scale
available to Clutter. This API will be used for "guessing" the
resource-scale of ClutterActors in case the actor is not attached to a
stage or not properly positioned yet.
We set this value from inside mutters MetaRenderer while creating new
stage-views for each logical monitor. This makes it possible to set the
fallback scale to the scale of the primary monitor, which is the monitor
where most ClutterActors are going to be positioned.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1276
The portal API requires a screencast session only for absolution motion
with remote desktop, other methods including relative motion do not
require a screencast session.
There is no reason to be more strict than the API actually is, check for
a screencast session only when required, like for absolute motion events
and touch events.
Tested with https://gitlab.gnome.org/snippets/1122
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1307
There are a couple of places in gnome-shell where we aren't interested
in which workspace is active, but whether a given workspace is active.
Of course it's easy to use the former to determine the latter, but we
can offer a convenience property on the workspace itself almost for
free, so let's do that.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1336
These tests were written (and copy-pasted) before ClutterActor
had an actual background-color property. As a preparation to
the removal of ClutterRectangle, replace all these rectangles
with plain actors and background colors.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
The property is deprecated and the current implementation simply
redirects it to ClutterActor::background-color, so remove it.
Also update the tests to set the background color directly.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
It is deprecated in favor of the 'z-position' property, and
the implementation itself redirects to the z-position, so
just drop it and replace all get|set_depth calls to their
z-position counterparts.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
We were setting the pipeline colour to all white (1.0, 1.0, 1.0, 1.0)
and so the default layer combine function multiplied each pixel
(R, G, B, A) by all ones. Obviously multiplying by one four times per
pixel is a waste of effort so we remove the colour setting *and* set
the layer combine function to a trivial shader that will ignore whatever
the current pipeline colour is set to. So now we do **zero** multiplies
per pixel.
On an i7-7700 at UHD 3840x2160 this results in 5% faster render times
and 10% lower power usage (says intel_gpu_top). The benefit is probably
much higher for virtual machines though, as they're no longer being
asked to do CPU-based math on every pixel of a window.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1331
The previous commit removed checks for intermediate focus states which
would make tests randomly fail, because of their time dependence. What
can be tested however is that if there is no other window available that
would accept the focus, that the focus remains at 'none', after the
focused window has been closed. This newly introduced test checks the
focus directly after closing the window (and syncing) and after the time
it would have taken for the queue to finish. The first check has a
similar timing issue as the removed focus checks in the other tests, but
the test will never accidentally fail, because regardless of whether the
queue has finished or not, the focus is always expected to be 'none'.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1329
While c3d13203 ensured that the test-client has actually closed the
window before testing for the focus change, it also made another timing
related issue with the tests more likely to happen. Serveral tests
assert that the focus is set to 'none' after the focussed window has
been closed when the window below does not accept focus. This however
can never be reliably tested, because closing the window triggers
timeout based iteration of a queue of default focus candidate windows.
This starts after the window has been closed and might finish before the
clients have finished synchronizing. This issue is more likely to
trigger the shorter the queue is and the more test clients there are
that could delay the synchronization.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1329
This avoids some issues which could happen on some setups[0] due to
meta-native-renderer.c:dummy_power_save_page_flip →
meta_onscreen_native_swap_drm_fb implicitly turning of the primary
plane (by destroying the KMS framebuffer assigned to it):
* drmModeObjectSetProperty could return an "Invalid argument" error
between setting a non-empty cursor with drmModeSetCursor(2) and
enabling the primary plane again:
Failed to DPMS: Failed to set connector 69 property 2: Invalid argument
(This was harmless other than the error message, as we always re-set
a mode on the CRTC after setting the DPMS property to on, which
enables the primary plane and implicitly sets the DRM property to on)
* drmModeSetCursor(2) could return an "Invalid argument" error between
setting the DPMS property to on and enabling the primary plane again:
Failed to set hardware cursor (drmModeSetCursor failed: Invalid argument), using OpenGL from now on
[0] E.g. with the amdgpu DC display code.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1240
In commit 4c1fde9d MetaCullable related code was moved out of
MetaShapedTexture into MetaSurfaceActor. While generally desirable,
this removed drawing optimizations in MetaShapedTexture for partial
redraws. The common case for fully obscured actors was still supposed
to work, but it was now discovered that it actually did not.
This commit revert parts of 4c1fde9d: it reintroduces clipping
to MetaShapedTexture but leaves all culling and actor related logic
in MetaSurfaceActor.
Thanks to Daniel van Vugt for uncovering the issue.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/850
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1295https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1326
When trying to find a default focus window, the code iterates through a
queue of candidates with a timeout between each candidate. If the window
the current timeout is waiting for gets destroyed, this process just
stops instead of trying the next window in the queue.
This issue was made more likely to be triggered with the previous change
to the closed-transient-no-input-parents-queued-default-focus-destroyed
test due to the introduction of a wait, which can introduce a
delay between the two destroy commands.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1325
Some tests were not waiting for the test client to actually issue
destroy commands before checking their effect on the window focus.
Similarly when mutter is supposed to change the focus based on a delay
by sending a WM_TAKE_FOCUS to the client, this also could fail without
synchronization with the client before checking the result.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1325
We delegate the answer through CoglDriverVtable::is_hardware_accelerated
since this is properly a property of the renderer, and not something the
cogl core should know about. The answer given for the nop driver is
admittedly arbitrary, yes it's infinitely fast but no there's not any
"hardware" making it so.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1194
Event delivery with grabbing popups stay essentially the same within
the grabbing client, we still must honor the implicit grab as long as
there is one.
This is however not the case, the popup_grab_focus() function ignores
the button state. The popup_grab_button() function will already indirectly
re-sync the focus surface after the last button is released, so checking
for button state in popup_grab_focus() is sufficient to make the implicit
grab honored with popup grabs involved.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1275https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1270
When a touch sequence was rejected, we'd update the event timestamps of
incoming touch events to help with implementing grabs. This was done by
sending a ClientMessage with a counter, and comparing the counter to
decide whether we're seing a replayed event or not.
This had the unforseen consequence that we would potentially end up
destroying all actors including the stage, since, when mutter receives a
ClientMessage event, it would assume that it's a WM_PROTOCOLS event, and
handle it as such. The problem with this approach is that it would
ignore fact that there might be other ClientMessage types sent to it,
for example the touch synchronization one. What could happen is that the
touch count value would match up with the value of the WM_DELETE_WINDOW
atom, clutter would treat this as WM_PROTOCOLS:WM_DELETE_WINDOW, which
it'd translate to clutter_actor_destroy(stage).
Destroying the stage in such a way is not expected, and caused wierd
crashes in different places depending on what was going on.
This commit make sure we only treat WM_PROTOCOLS client messages as
WM_PROTOCOLS client messages effectively avoiding the issue.
This fixes crashes such as:
#0 meta_window_get_buffer_rect (window=0x0, rect=rect@entry=0x7ffd7fc62e40) at core/window.c:4396
#1 0x00007f1e2634837f in get_top_visible_window_actor (compositor=0x297d700, compositor=0x297d700) at compositor/compositor.c:1059
#2 meta_compositor_sync_stack (compositor=0x297d700, stack=<optimized out>, stack@entry=0x26e3140) at compositor/compositor.c:1176
#3 0x00007f1e263757ac in meta_stack_tracker_sync_stack (tracker=0x297dbc0) at core/stack-tracker.c:871
#4 0x00007f1e26375899 in stack_tracker_sync_stack_later (data=<optimized out>) at core/stack-tracker.c:881
#5 0x00007f1e26376914 in run_repaint_laters (laters_list=0x7f1e2663b7d8 <laters+24>) at core/util.c:809
#6 run_all_repaint_laters (data=<optimized out>) at core/util.c:826
#7 0x00007f1e26b18325 in _clutter_run_repaint_functions (flags=flags@entry=CLUTTER_REPAINT_FLAGS_PRE_PAINT) at clutter-main.c:3448
#8 0x00007f1e26b18fc5 in master_clock_update_stages (master_clock=0x32d6a80, stages=0x4e5a740) at clutter-master-clock-default.c:437
#9 clutter_clock_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at clutter-master-clock-default.c:567
#10 0x00007f1e27e48049 in g_main_dispatch (context=0x225b8d0) at gmain.c:3175
#11 g_main_context_dispatch (context=context@entry=0x225b8d0) at gmain.c:3828
#12 0x00007f1e27e483a8 in g_main_context_iterate (context=0x225b8d0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3901
#13 0x00007f1e27e4867a in g_main_loop_run (loop=0x24e29f0) at gmain.c:4097
#14 0x00007f1e2636a3dc in meta_run () at core/main.c:666
#15 0x000000000040219c in main (argc=1, argv=0x7ffd7fc63238) at ../src/main.c:534
and
#0 0x00007f93943c1f25 in raise () at /usr/lib/libc.so.6
#1 0x00007f93943ab897 in abort () at /usr/lib/libc.so.6
#2 0x00007f9393e1e062 in g_assertion_message (domain=<optimized out>, file=<optimized out>, line=<optimized out>, func=0x7f93933e6860 <__func__.116322> "meta_x11_get_stage_window",
#3 0x00007f9393e4ab1d in g_assertion_message_expr ()
#4 0x00007f939338ecd7 in meta_x11_get_stage_window (stage=<optimized out>) at ../mutter/src/backends/x11/meta-stage-x11.c:923
#5 0x00007f939339e599 in meta_backend_x11_cm_translate_device_event (x11=<optimized out>, device_event=0x55bc8bcfd6b0) at ../mutter/src/backends/x11/cm/meta-backend-x11-cm.c:381
#6 0x00007f939339f2e2 in meta_backend_x11_translate_device_event (device_event=0x55bc8bcfd6b0, x11=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:179
#7 0x00007f939339f2e2 in translate_device_event (device_event=0x55bc8bcfd6b0, x11=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:208
#8 0x00007f939339f2e2 in maybe_spoof_event_as_stage_event (input_event=0x55bc8bcfd6b0, x11=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:284
#9 0x00007f939339f2e2 in handle_input_event (event=0x7fff62d60490, x11=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:309
#10 0x00007f939339f2e2 in handle_host_xevent (event=0x7fff62d60490, backend=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:413
#11 0x00007f939339f2e2 in x_event_source_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at ../mutter/src/backends/x11/meta-backend-x11.c:467
#12 0x00007f9393e6c39e in g_main_dispatch (context=0x55bc89dd03e0) at ../glib/glib/gmain.c:3179
#13 0x00007f9393e6c39e in g_main_context_dispatch (context=context@entry=0x55bc89dd03e0) at ../glib/glib/gmain.c:3844
#14 0x00007f9393e6e1b1 in g_main_context_iterate (context=0x55bc89dd03e0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at ../glib/glib/gmain.c:3917
#15 0x00007f9393e6f0c3 in g_main_loop_run (loop=0x55bc8a042640) at ../glib/glib/gmain.c:4111
#16 0x00007f9393369a0c in meta_run () at ../mutter/src/core/main.c:676
#17 0x000055bc880f2426 in main (argc=<optimized out>, argv=<optimized out>) at ../gnome-shell/src/main.c:552
Related: https://gitlab.gnome.org/GNOME/mutter/-/issues/338
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/951https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1317
Make the clutter_input_device_get_actor() API public and remove
clutter_input_device_get_pointer_actor() in favour of the new function.
This allows also getting the "pointer" actor for a given touch sequence,
not only for real pointer input devices like mice.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1275
Add a method to ClutterSeat that allows peeking the list of input
devices and allow looping through devices a bit faster. The API left is
private so we can make use of peeking the GList internally, but don't
have to expose any details to the outside, which means we'd have to
eventually stick with a GList forever to avoid breaking API.
Since we now have the peek_devices() API internally, we can implement
ClutterSeats public list_devices() API using g_list_copy() on the list
returned by peek_devices().
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1275
As explained in the last commits, we'll let gnome-shell take care of
this since freezing and thawing needs to be decoupled from the effect
starting and ending.
So stop freezing the MetaWindowActor when starting the effect and
thawing the actor when ending the effect.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1250
As explained in the last commit, gnome-shell needs to be able to thaw
window actor updates during its size-change effect is active.
So make meta_window_actor_freeze() and meta_window_actor_thaw() public
API, which will allow the shell to freeze and thaw actor updates itself.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1250
The size-change animation in gnome-shell needs to sync the window actors
geometry during the animation, it currently does this by notifying the
compositor that the animation was finished before it actually is.
This causes a few bugs in Mutter though, since it will now emit the
"effects-completed" signal on the window actor even though they aren't
completed.
To fix that, we need to decouple freezing and thawing of actor updates
from window effects and allow gnome-shell to thaw actor updates before
it notifies Mutter that the effect is completed.
The first step for this is allowing to sync the actor geometry while an
effect is active, this should be redundant since effects which actually
need to inhibit those updates will freeze the actor anyway. Also a
geometry change happening while another effect is active will kill the
old effect anyway because MetaPluginManager kills all the active window
effects before starting a new one; so the new size-change effect for any
geometry change is going to kill the current effect.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1250
Trying to figure out what this comment was actually about, it turns out
that MSC means Media Stream Counter, and as mentioned in an article[0]
is related to DRI3 and the X11 Present extension. Anyway, the comment
has been there raising questions for some years now, I think we can
remove it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
The ID and name are just moved into the instance private, while the rest
is moved to a `MetaCrtcModeInfo` struct which is used during
construction and retrieved via a getter. Opens up the possibility to
add actual sub types.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
Just as with MetaOutput, instead of the home baked "inheritance" system,
using a gpointer and a GDestroyNotify function to keep the what
effectively is sub type details, make MetaCrtc an abstract derivable
type, and make the implementations inherit it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
Instead of the home baked "inheritance" system, using a gpointer and a
GDestroyNotify function to keep the what effectively is sub type
details, make MetaOutput an abstract derivable type, and make the
implementations inherit it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
It's used for two things: avoid reading configs, and actual hotplug
update mode. The former requires the suggested position to be (-1, -1)
to trick the monitor configuration generator to skip using the suggested
position even if hotplug update mode is set to TRUE. The latter should
use the actual hotplug mode coordinates.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
Now set as a property during construction. Only actually set by the
Xrandr backend, as it's the only one currently not supporting all
transforms, which is the default.
While at it, move the 'ALL_TRANFORMS' macro to meta-monitor-tranforms.h.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
The output info is established during construction and will stay the
same for the lifetime of the MetaOutput object. Moving it out of the
main struct enables us to eventually clean up the MetaOutput type
inheritence to use proper GObject types.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
MetaCrtcInfo and MetaOutputInfo did not represent information about
MetaCrtc and MetaOutput, but the result of the monitor configuration
assignment algorithm, thus rename it to MetaCrtcAssignment and
MetaOutputAssignment.
The purpose for this is to be able to introduce a struct that actually
carries information about the CRTCs and outputs, as retrieved from the
backend implementations.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
That is is_presentation, is_primary, is_underscanning and backlight.
The first three are set during CRTC assignment as they are only valid
when active. The other is set separately, as it is untied to
monitor configuration.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
It was used during configuration to ensure that we always dealt with
every output and CRTC. Do this without polluting the MetaOutput and
MetaCrtc structs with intermediate variables not used by the
corresponding types themself.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1287
The current code assumes that the actor will always have the same
size and position of the background texture, but part of the implicit
contract of being a ClutterContent is being able to render itself
at any given actor, at any given size.
For example, if the current code is given an actor with 0x0+100+100
as geometry, and no clipped region, it'll render not the whole
background, but the 0x0+100+100 rectangle of the background. In
practice, the actor geometry acts like a "clip mask" over the
background texture, due to the assumption that the actor will
always have the same size of the monitor.
Make the calculation of the texture slices relative to the actor
box.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1302
MetaBackgroundActor is still necessary for culling purposes,
but now the actual rendering of the background is delegated
to MetaBackgroundContent, as well as the sizing information.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1302
MetaBackgroundContent is a ClutterContent implementation
that can render a background to any attached actor. Right
now, it preserves all the properties and the rendering
model of MetaBackgroundActor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1302
X11 window stacking operations are by nature prone to race conditions.
For example, we might queue a "raise above" operation, but before it
actually takes place, the sibling the window was to be rased above, is
withdrawn.
In these cases we'd log warnings even though they are expected to
happen. Downgrade these warnings to debug messages, only printed when
MUTTER_VERBOSE is set.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1300
Test that the stage-views list of ClutterActor is correct when moving an
actor, reparenting it, or hiding an actor up the hierarchy. Also test
that the "stage-views-changed" signal works as expected.
Don't test actor transforms for now because those aren't supported yet.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
When the stage views the stage is shown on are changed, ClutterStage
currently provides a clutter_stage_update_resource_scales() method
that allows invalidating the resource scales of all actors. With the new
stage-views API that's going to be added to ClutterActor, we also need a
method to invalidate the stage-views lists of actors in case the stage
views are rebuilt and fortunately we can re-use the infrastructure for
invalidating resource scales for that.
So since resource scales depend on the stage views an actor is on,
rename clutter_stage_update_resource_scales() and related methods to
clutter_stage_clear_stage_views(), which also covers resource scales.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1196
When an app disappears after some data from it has been copied to the
clipboard, the owner of the clipboard selection becomes a new memory
selection source. The initial reference this new selection source is
never unref'ed, which leads to this being leaked on the next clipboard
selection owner change.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1293
Using XDG_CONFIG_HOME allows users to place their keyboard configuration into
their home directory and have them loaded automatically.
libxkbcommon now defaults to XDG_CONFIG_HOME/xkb/ first, see
https://github.com/xkbcommon/libxkbcommon/pull/117
However - libxkbcommon uses secure_getenv() to obtain XDG_CONFIG_HOME and thus
fails to load this for the mutter context which has cap_sys_nice.
We need to manually add that search path as lookup path.
As we can only append paths to libxkbcommon's context, we need to start with
an empty search path set, add our custom path, then append the default search
paths.
The net effect is nil where a user doesn't have XDG_CONFIG_HOME/xkb/.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/936
We would get the MetaDisplay from the backend singleton before creating
the MetaCompositor, then in MetaCompositor, get the backend singleton
again to get the stage. To get rid of the extra singleton fetching, just
pass the backend the MetaCompositor constructors, and fetch the stage
directly from the backend everytime it's needed.
This also makes it available earlier than before, as we didn't set our
instance private stage pointer until the manage() call.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1289
Also fix a test that dependends on a specific element order in a list
that wasn't defined to have any particular order.
The frames per second is decreased from 30 to 10, to make the test less
flaky when running in CI.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1289
The shadow was disabled for the X11 client as it was far to unreliable
when comparing sizes.
It seems that the Wayland backend has been somewhat unreliable as well,
where some race condition causing incorrect sizes thus a flaky test.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1288
A "show" command calls gtk_window_show() and gdk_display_sync(), then
returns. This means that the X11 window objects are guaranteed to have
been created in the X11 server.
After that, the test runner will look up the window's associated
MetaWindow and wait for it to be shown.
What this doesn't account for is if mutter didn't get enough CPU time to
see the new window. When this happens, the 'default-size' stacking test
sometimes failed after hiding and showing the X11 window.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1288
When we created the DMA buffer backed CoglFramebuffer, we handed it over
to CoglDmaBufHandle which took its own reference. What we failed to do
was to release our own reference to it, effectively leaking it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1283
The stream will clean up the buffers, so let it do that before we
destroy them under its feet. Note that it'll only do this after the
following PipeWire commit:
commit fbaa4ddedd84afdffca16f090dcc4b0db8ccfc29
Author: Wim Taymans <wtaymans@redhat.com>
Date: Mon Jun 1 15:36:09 2020 +0200
stream: allow NULL param and 0 buffers in disconnect
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1283
wait_reconfigure ensures that the whole configure back and forth
completes before continuing. Doing this after every state change ensures
that we always end up with the expected state, thus fixes flakyness of
the restore-position stacking test.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1279
This cannot be made to work reliably. Some factoids:
- Internal devices may be connected via USB.
- The ACPI spec provides the _PLD (Physical location of device) hook to
determine how is an USB device connected, with an anecdotal success
rate. Internal devices may be seen as external and vice-versa, there is
also an "unknown" value that is widely used.
- There may be non-USB keyboards, the old "AT Translated Set 2 Keyboard"
interface does not change on hotplugging.
- Libinput has an internal series of quirks to classify keyboards as
internal of external, also with an "unknown" value.
These heuristics are kinda hopeless to get right by our own hand. Drop
this external keyboard detection in the hope that there will be something
more deterministic to rely on in the future (e.g. the libinput quirks
made available to us directly or indirectly).
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2378
Related: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2353https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1277
Move Wayland support (i.e. the MetaWaylandCompositor object) made to be
part of the backend. This is due to the fact that it is needed by the
backend initialization, e.g. the Wayland EGLDisplay server support.
The backend is changed to be more involved in Wayland and clutter
initialization, so that the parts needed for clutter initialization
happens before clutter itself initialization happens, and the rest
happens after. This simplifies the setup a bit, as clutter and Wayland
init now happens as part of the backend initialization.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1218
On X11 we don't update the texture in certain circumstances, such as if
the surface is a fullscreen unredirect, or doesn't have a Pixmap. On
Wayland we only want to avoid updating the texture if there is no
texture, but as this is handled implicitly by MetashapedTexture, we
don't need to try to emulate the X11-y conditions in the generic layer
and instead just have the implementations handle update processing
themself.
This doesn't have any functional changes, but removes a vfunc from
MetaSurfaceActorClass.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1218
We failed to use the buffer age when monitors were rotated, as when they
are, we first composite to an offscreen framebuffer, then later again to
the onscreen. The buffer age checking happened on the offscreen, and an
offscreen being single buffered, they can't possible support buffer
ages.
Instead, move the buffer age check to check the actual onscreen
framebuffer. The offscreen to onscreen painting is still always full
frame, but that will be fixed in a later commit.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1237
Will be used for logging to identify what view a log entry concerns. For
the native and nested backend this is the name of the output the CRTC is
assigned to drive; for X11 it's just "X11 screen", and for the legacy
"X11 screen" emulation mode of the nested backend it's called "legacy
nested".
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1237
There's no reason to notify the surface that its geometry changed when
the visibility of the actor changes. This is only needed to update the
outputs of the surface, so do that directly instead.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1235
We started listening to notify::mapped with commit
5eb5f72434 in order to emit
wl_surface.leave events consistently when a surface gets hidden. This
caused a problem with the ClutterClones used in the overview, since
those temporarily map and unmap the windows for painting, spamming
wl_surface.leave and enter events to all surfaces.
We can easily fix that by also treating mapped clones as mapped, which
means the surface should also be on a wl_output when the overview is
shown.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1141https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1235
All existing users of clutter_actor_has_mapped_clones() actually want to
know whether the actor is being cloned by a visible clone, it doesn't
matter to them if that clone is attached to an actor somewhere else in
the tree or to the actor itself.
So make clutter_actor_has_mapped_clones() a bit more convenient to use
and also check the clones of the parent-actors in that function.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1235
We started listening to "notify::position" on surface actors with commit
08e4cb54. This commit was done to fix a regression from commit cf1edff9,
which forgot to handle some cases like the actual WindowActor and not
the SurfaceActor (which is a child of the WindowActor) moving (that was
fixed by listening to MetaWindows "position-changed" signal). Also that
commit introduced meta_wayland_surface_update_outputs_recursively(),
which updates the outputs of all (sub-)surfaces in case any position
changed and made sure subsurfaces also get their outputs updated in case
the parent actor moved.
Connecting to the "notify::position" signal, which the above commit also
did is now superflous though because position changes will queue a
relayout and the actors allocation will change during the next
allocation cycle, notifying the "allocation" property which we also
listen to.
So save some resources and stop listening to that signal.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1235
We don't have enough Xlib code in mutter ...
Joking aside, it can be useful to make the cursor invisible
without hiding it, for example for replacing the actual cursor
with an actor in gnome-shell; the real cursor should still
update the focus surface in that case, and not sneak into
screenshots or -casts.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1244
We're iterating inside the PipeWire loop when detecting PipeWire errors,
and shouldn't destroy the PipeWire objects mid-iteration. Avoid this by
first disabling the stream src (effectively stopping the recording),
then notifying about it being closed in an idle callback. The
notification eventually makes the rest of the screen cast code clean up
the objects, including the src and the associated PipeWire objects, but
will do so outside the PipeWire loop iteration.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1251https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1251
In the native backend, the MetaRenderer manages the view by creating one
per CRTC, but until now the MetaStageX11 managed the view for the X11
backend. This caused some issues as it meant meta_renderer_get_views()
not returning anything, and that the view of the X11 screen not being a
MetaRendererView, while in the other backends, all views are.
Fix this by moving the view management responsibility to
MetaRendererX11Cm, and have MetaStageX11 only operate on it via
meta_renderer_x11_cm_*() API. The MetaRendererX11Cm takes care of making
sure the view is always added to the list in the renderer, and turning
X11 screen sizes into "layouts" etc.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1251
"Legacy" is a misleading name, it's just how the native backend and the
X11 backend behaves differently. Instead rename it to 'add_view()' and
add the sanity check to the caller.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1251
A DMA buffer might not be able to scanout, and in that case the import
with GBM_BO_USE_SCANOUT will fail. Handle that by failing to scanout,
effectively falling back to compositing.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1261
Since PIDs are inherently insecure because they are reused after a
certain amount of processes was started, it's possible the client PID
was spoofed by the client.
So make sure users of the meta_window_get_pid() API are aware of those
issues and add a note to the documentation that the PID can not be
totally trusted.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1180
Since the PID of a window can't change as long as the window exists, we
can safely cache it after we got a valid PID once, so do that by adding
a new `window->client_pid` private property.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1180
The shell uses the PID of windows to map them to apps or to find out
which window/app triggered a dialog. It currently fails to do that in
some situations on Wayland, because meta_window_get_pid() only returns a
valid PID for x11 clients.
So use the client PID instead of the X11-exclusive _NET_WM_PID property
to find out the PID of the process that started the window. We can do
that by simply renaming the already existing
meta_window_get_client_pid() API to meta_window_get_pid() and moving
the old API providing the _NET_WM_PID to meta_window_get_netwm_pid().
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1180
They all checked that the remote session service talked with the
correct peer, and some of them did check that there is an associated
screencast session.
Add a new check for the session being started (as it's state is
decoupled with screencast session availability) and move all checks
to a function that is called from all input-oriented DBus methods.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1254https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1258
It was removed in 3.34 as part of 6ed5d2e2. And we thought that was the
only thread that might exist and use X11. But the top gnome-shell crasher
in 3.36 seems to suggest otherwise.
We don't know what or where the offending thread is, but since:
1. We used XInitThreads for years already prior to 3.34; and
2. Extensions or any change to mutter/gnome-shell could conceivably use
threads to make X calls, directly or indirectly,
it's probably a good idea to reintroduce XInitThreads. The failing assertion
in libx11 is also accompanied by a strong hint:
```
fprintf(stderr, "[xcb] Most likely this is a multi-threaded client " \
"and XInitThreads has not been called\n");
```
https://bugs.launchpad.net/bugs/1877075
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1252https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1256
When the wallpaper image is larger than the monitor resolution we already
use mipmapping to scale it down smoothly in hardware. We use
`GL_TEXTURE_MIN_FILTER` = `GL_LINEAR_MIPMAP_LINEAR` for the highest quality
scaling that GL can do. However that option is designed for 3D use cases
where the mipmap level is changing over time or space.
Since our wallpaper is not changing distance from us we can improve the
rendering quality even more than `GL_LINEAR_MIPMAP_LINEAR`. To do this we
now set `GL_TEXTURE_MAX_LEVEL` (if available) to limit the mipmap level or
blurriness level to the lowest resolution (highest level) that is still
equal to or higher than the monitor itself. This way we get the benefits
of mipmapping (downscaling in hardware) *and* retain the maximum possible
sharpness for the monitor resolution -- something that
`GL_LINEAR_MIPMAP_LINEAR` alone doesn't do.
Example:
Monitor is 1920x1080
Wallpaper photo is 4000x3000
Mipmaps stored on the GPU are 4000x3000, 2000x1500, 1000x750, ...
Before: You would see an average of the 2000x1500 and 1000x750 images.
After: You will now only see the 2000x1500 image, linearly sampled.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1003
It's very useful to have common functions for easily creating a monitor
test setup for all kinds of tests, so move create_monitor_test_setup()
and check_monitor_configuration() and all the structs those are using to
monitor-test-utils.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1243
We're going to move some structs from monitor-unit-tests.c to
monitor-test-utils.h and some names are currently clashing with the
struct names here, so rename those to be specific to the
MonitorStoreUnitTests.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1243
check_monitor_test_clients_state() is a function that's only meant to be
used in the monitor-unit-tests, and since we're going to move the
functions for creating MonitorTestSetups into a common file, this
function is going to be in the way of that. So move the checking of the
test client state outside of check_monitor_test_clients_state().
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1243
We're going to move the functions for building MonitorTestSetups to the
common monitor-test-utils.c file.
To make building test setups a bit more straightforward in case no
TestCaseExpect is wanted, change create_monitor_test_setup() to take a
MonitorTestCaseSetup instead of a MonitorTestCase as an argument.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1243
Commit e06daa58c3 changed the tested values to use corresponding valid
enum values instead of negative ones. Unfortunately that made one value
become a duplicate of an existing one and also in part defeated the original
intention of checking the implementation of
`meta_output_crtc_to_logical_transform`.
Use `meta_monitor_transform_invert` to fix both shortcomings.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1242
One of the important classes in Mutter's handling of client textures is
the `MetaShapedTexture`. This commit adds a few gtk-doc comments which
explain its purpose, with special attention to the viewport methods.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1210
Since we're now connecting to one more signal of MetaWaylandOutput, keep
signal connections in one place and move connecting the
"output-destroyed" signal to surface_entered_output() and disconnecting
it to surface_left_output().
This also allows us to use the "outputs_to_destroy_notify_id" as a
simple set and rename it to "outputs".
While at it, also use g_hash_table_destroy() instead of
g_hash_table_unref() since destroy is more clear than unref and does the
same thing in this case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1230
When hotplugging a new monitor, we recreate all the MetaWaylandOutputs
and need to emit leave events to the surfaces for the old wl_outputs and
enter events for the newly created ones.
There's a race condition though: We might update the monitors a surface
is on (and thus emit enter/leave events for the wl_outputs) before the
Wayland client is registered with the new wl_output (ie. the
bind_output() callback of MetaWaylandOutput was called), which means we
don't send an enter event to the client in surface_entered_output().
Since MetaWaylandSurface now has the MetaWaylandOutput in its outputs
hashtable, it thinks the client has been notified and won't send any
more enter events.
To fix that, make MetaWaylandOutput emit a new signal "output-bound"
when a client bound to the output and make all surfaces which are on
that output listen to the signal. In the signal handler compare the
newly added client to the client the surface belongs to, and if it's the
same one, send an enter event to that client.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1230
The "output-destroyed" signal is used for notifying MetaWaylandSurfaces
that an output they are shown just got invalid (for example because a
monitor hotplug happened).
While we delay the destroying of outputs by 10 seconds since commit
1923db97 because of a race-condition, it doesn't make sense to wait 10
seconds until we let surfaces know that an output was destroyed.
So move the emission of the "output-destroyed" signal to
make_output_inert(), which is called before we start the 10 seconds
delay.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1230
When tiling, we want to set the tile monitor. To not have to do this
from the call site, make meta_window_tile() fall back to the current
monitor if nothing set it prior to the call.
This will make it more convenient for test cases to test tiling
behavior.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1171
The test tests that (for both X11 and Wayland) that:
* The client unmaximizes after mapping maximized to a predictable size
* That the client unmaximizes to the same size after toggling maximize
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1171
This makes sure that a client has properly responded to a configure
event it itself triggered. In practice, this is just two 'wait'
commands, with a 'dispatch' in between, which is needed because a single
one does not reliably include the two way round trip happening when e.g.
responding to a unmaximize configure event triggered by a unmaximize
request.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1171
The 'assert_size' command checks that the size of the window, both
client side and compositor side, corresponds to an expected size set by
the test case.
The size comparison can only be done when the window is using 'csd', in
order for both the client and server to have the same amount of
understanding of the title bar. For ssd, the client cannot know how
large the title bar, thus cannot verify the full window size.
Sizes can be specified to mean the size of the monitor divided by a
number. This is that one can make sure a window is maximized or
fullscreened correctly.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1171
Gtk is quite buggy and "fluid" in how it handles the shadow margins for
windows under X11. The "size" of the window fluctuate between including and
excluding a shadow margin in a way that causes issues, as there are no
atomic update of any state going on.
In order to avoid running into those particular issues now, lets get rid
of shadows so the margins are always zero, when the client is using the
X11 backend.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1171
To get some kind of consistency between what 'resize' means for the
compositor and the client, make the size correspond to the "frame rect"
of the window, i.e. the window geometry in the Wayland case, and the
window size including the titlebar in the X11 case.
This is so that the window size later can be reliably compared both in
the compositor and in the client using the same expected dimensions.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1171
When toying with the test client to try to reproduce issues (e.g.
writing commands on stdin to create and manipulate windows), when you
write a command incorrectly you'll get a warning printed to standard
out. The problem, however, is that it doesn't include a line break in
the end, meaning when you type the correct command, it won't be on a new
line.
Fix this minor annoyance by adding line breaks to all warning messages.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1171
The test client could already understand the resize command, but they
could not be added to metatests as the command was not properly plumbed
via the test runner. Establish the plumbing for the resize command so
that resize tests can be added.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1171
This removes ClutterAnimation and related tests. ClutterAnimation has
been deprecated for a long time, and replacements exist and are used by
e.g. GNOME Shell since a while back.
This also disables a few relatively unrelated interactive tests, as they
rely on ClutterAnimation to implement some animations they use to
illustrate what they actually test.
As interactive tests currently are more or less untestable due to any
interaction with them crashing, as well as they in practice means
rewriting the tests using non-deprecated animation APIs, they are not
ported right now. To actually port the interactive tests, it needs to be
possible to fist interact with them.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1192
When memfd_create isn't used, the file isn't sealed. Therefore, we
should skip test_readonly_seals on the fallback case. This fixes
compilation error on FreeBSD 12, which does not support memfd_create.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1229
We were iterating through evcodes, but using API that expects Clutter button
numbers. Instead of transforming those to Clutter numbers to have those translated
back, use the inner seat API that already takes evcodes.
Fixes stuck buttons keys after a virtual device is destroyed while those are
pressed.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1239
Move to center uses all monitors for calculating work area.
This can lead to an unexpected behaviour on some monitor
configurations resulting in current window being split between
monitors. We should move window to the center of the active display.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1073
Inhibiting remote access means any current remote access session is
terminated, and no new ones can be created, until remote access is
uninhibited. The inhibitation is ref counted, meaning there can be more
than one inhibitor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1212
When resizing an X11 window with client side decorations, the shadow is
clipped by the frame bounds so that we don't need to paint the shadow
under the opaque areas covered by the window and its frame.
When the X11 client uses the EMWH synchronization mechanism (like all
gtk-3 based clients), the actual window may not be updated so that the
actual window and it frame may be behind the expected window frame
bounds, which gives the impression of de-synchronized shadows.
To avoid the issue, keep a copy of the frame bounds as a cache and only
update it when the client is not frozen so that the clipping occurs on
the actual content.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/1178https://gitlab.gnome.org/GNOME/mutter/merge_requests/1214
It takes coordinates in stage coordinate space, and will result in
a screen cast stream consisting of that area, but scaled up by the scale
factor of the view that overlaps with the area and has the highest scale
factor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1207
Will be used by the stage to not paint the overlays. We skip all
overlays since overlays are only ever used for pointer cursors when the
hardware cursors cannot or should not be used.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1207
These phase callbacks are not intended to be inovked when something
secondary is painting the stage, such as a screen cast stream, or
similar. Thus, only invoke the callbacks when there is a view associated
with the paint context, which will not be the case for offscreen
painting.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1207
If there is a paint context available (i.e. for the phases that are
during the actual stage paint), pass it along the callbacks, so that
the callback implementations can change their operation depending on the
paint context state.
This also means we can get the current view from the paint context,
instead of the temporarily used field in the instance struct.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1207
A paint flag affects a paint operation in ways defined by the flags.
Currently no flags are defined, so no semantical changes are defined
yet. Eventually a flag aiming to avoid painting of cursors is going to
be added, so that screen cast streams can decide whether to include a
cursor or not.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1207
If drmModePageFlip() or custom_page_flip_func fails, process_page_flip() was
forgetting to undo the ref taken for that call. This would leak page_flip_data.
The reference counting works like this:
- when created, ref count is 1
- when calling drmModePageFlip, ref count is increased to 2
- new: if flip failed, ref count is decreased back to 1
- if calling schedule_retry_page_flip(), it takes a ref internally
- if calling mode_set_fallback(), it takes a ref internally
- all return FALSE paths have an explicit unref
- return TRUE path has an explicit unref
This issue was found by code inspection and while debugging an unrelated issue
with debug prints sprinkled around. I am not aware of any end-user visible
issues being fixed by this, as the leak is small and probably very rare.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1209
When testing a laptop with intel and DisplayLink devices, attempting to set the
DL output as the only active output resulted in GNOME/Wayland freezing. The
main event loop was running fine, but nothing on screen would get updated once
the DL output become the only one. This patch fixes that issue.
DisplayLink USB 3 devices use an out-of-tree kernel DRM driver called EVDI.
EVDI can sometimes fail drmModePageFlip(). For me, the flip fails reliably when
hotplugging the DL dock and when changing display configuration to DL only.
Mutter has a workaround for failing flips, it just calls drmModeSetCrtc() and
that succeeds.
What does not work reliably in the fallback path is Mutter keeping track of the
pageflip. Since drmModePageFlip() failed, there will not be a pageflip event
coming and instead Mutter queues a callback in its stead. When you have more
than one output, some other output repainting will attempt to swap buffers and
calls wait_for_pending_flips() which has the side-effect of dispatching any
queued flip callbacks. With multiple outputs, you don't get stuck (unless they
all fail the exact same way at the same time?). When you have only one output,
it cannot proceed to repaint and buffer swap because the pageflip is not marked
complete yet. Nothing dispatches the flip callback, leading to the freeze.
The flip callback is intended to be an idle callback, implemented with a
GSource. It is supposed to be called as soon as execution returns to the main
event loop. The setup of the GSource is incomplete, so it will never dispatch.
Fix the GSource setup by setting its ready-time to be always in the past. That
gets it dispatched on the next cycle of the main event loop. This is now the
default behavior for all sources created by meta_kms_add_source_in_impl().
Sources that need a delay continue to do that by overriding the ready-time
explicitly.
An alternative solution could have been to implement GSource prepare and check
callbacks returning TRUE. However, since meta_kms_add_source_in_impl() is used
by flip retry code as well, and that code needs a delay through the ready-time,
I was afraid I might break the flip retry code. Hence I decided to use
ready-time instead.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1209
According to the XSetSelectionOwner libX11 documentation:
[...] If the owner window it has specified in the request is later
destroyed, the owner of the selection automatically reverts to None,
but the last-change time is not affected.
This is indeed visible through the selection_timestamp field in
XFixesSelectionNotify events.
Use this to check whether the selection time is recent-ish (thus
likely coming from an explicit XSetSelectionOwner request) and honor
the client intent by setting a "NULL" owner. If the selection time
is too old, it's definitely an indication of the owner client being
closed, the scenario where we do want the clipboard manager to take
over.
This fixes two usecases:
- X11 LibreOffice / WPS clear the selection each time before copying
its own content. Mutter's clipboard manager would see each of those
as a hint to take over, competing with the client over selection
ownership. This would simply no longer happen
- Password managers may want to clear the selection, which would be
frustrated by our clipboard manager.
There's a slight window of opportunity for the heuristics to fail
though, if a X11 client sets the selection and closes within 50ms, we
would miss the clipboard manager taking over.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1206
The X11 selection source was being preserved after unsetting its
ownership. This is no leak as it would be eventually replaced by
another source, or destroyed on finalize. But it's pointless to
keep it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1206
Test the two modes of MetaAnonymousFile, MAPMODE_SHARED and
MAPMODE_PRIVATE and make sure they don't leak data to other FDs when
writing to an FD provided by `meta_anonymous_file_get_fd` even though
the data of both FDs is residing in the same chunk of memory.
We do all the reading tests using mmap instead of read() since using
read() on shared FDs is going to move the read cursor of the fd. That
means using read() once on the shared FD returned by
meta_anonymous_file_get_fd() in MAPMODE_PRIVATE breaks every subsequent
read() call.
Also test the fallback code of MetaAnonymousFile in case `memfd_create`
isn't used for the same issues.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1012
Add MetaAnonymousFile, an abstraction around anonymous read-only files.
Files can be created by calling meta_anonymous_file_new(), passing the
data of the file. Subsequent calls to meta_anonymous_file_open_fd()
return a fd that's ready to be sent over the socket.
When mapmode is META_ANONYMOUS_FILE_MAPMODE_PRIVATE the fd is only
guaranteed to be mmap-able readonly with MAP_PRIVATE but does not
require duplicating the file for each resource when memfd_create is
available. META_ANONYMOUS_FILE_MAPMODE_SHARED may be used when the
client must be able to map the file with MAP_SHARED but it also means
that the file has to be duplicated even when memfd_create is available.
Pretty much all of this code was written for weston by Sebastian Wick,
see https://gitlab.freedesktop.org/wayland/weston/merge_requests/240.
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1012
Instead of having everything clumped at MetaWaylandDataManager,
split the primary selection to its own struct. This manager is
handled separately from wl_data_device_manager and other selection
managers, so they would be able to interoperate between them, even.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1193
This is still an openly defined struct, as we will need accessed
by "subclasses". Same principle applies than with the
MetaWaylandDataSource refactor, this is not meant to introduce
functional changes, so just go with it.
On the bright side, the interactions are now clearer, so it could
be made saner in the future.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1193
The split wasn't 100% clean, and some extra private API had to be
added for it (but well, looking at the API, it's already evident
there's a cleanup/streamlining task due). This is meant to be a
refactor with no functional changes, so just go with it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1193
We already have a signal callback that translates selection ownership changes to
data_device/primary .selection events. Given both will be run when a data source
is being replaced, and this event emission being deleted is kinda short sighted
in that in only knows about Wayland, rely entirely on MetaSelection::owner-changed
emission.
Fixes spurious .selection(null) events being sent when a compositor-local source
takes over the selection without the focus changing (eg. screenshot to clipboard).
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1160https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1204
We are meant to send a .cancelled event after the drop is performed
in certain situations, but only for version>3 clients. Since this is
all version 3 business, only set the drop_performed flag for v3
clients. This drops the need to perform version checks at the time
of cancelling (which is present for other usecases in v1).
Fixes emission of wl_data_source.cancelled for v1 clients.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1177https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1203
For the cases where we read a fixed size from the selection (eg. imposing
limits for the clipboard manager), g_input_stream_read_bytes_async() might
not read up to this given size if the other side is spoonfeeding it content.
Cater for multiple read/write cycles here, until (maximum) transfer size is
reached.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1198
Flushing the X11 selection output stream may happen synchronously or
implicitly, in which case there is not a task to complete. Check there
is actually a task before returning errors. We additionally set the
pipe_error flag, so future operations will fail with an error, albeit
with a more generic message.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1198
If a write_async() comes up while we are flushing on the background,
the task will be queued, but not deemed a reason on itself to keep
flushing (and finish the task) after a property delete event.
To fix this, do not ever queue up write_async tasks (this leaves
priv->pending_task only used for flush(), so the "flush to end"
behavior in the background is consistent). We only start a
background flush if there's reasons to do it, but the tasks are
immediately finished.
All data will still be ensured to be transfered on flush/close,
this makes the caller in this situation still able to reach to it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1198
It does not make sense to check for the stream not being closed,
this might happen multiple times during the lifetime of the stream
for a single transfer. We want to notify the INCR transfer just
once.
Check for the explicit conditions that we want, that the remaining
data is bigger than we can transfer at once, and that we are not
yet within the INCR transfer.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1198
The stream automatically flushes after data size exceeds the
size we deem for INCR chunks, but we still try to copy it all.
Actually limit the data we copy, and leave the rest for future
INCR chunks.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1198
INCR transfers are mandated to finish with a final 0-size XChangeProperty
roundtrip after the final data chunk. Actually honor this and ensure we
iterate just once more for this.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1198
This seemed to work under the assumption that a flush() call can
only result in one INCR roundtrip. This is evidently not true, so
we should hold things off until all pending data is actually flushed.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1198
If say we want 32bit data, but have 2 bytes stored, we would simply
ignore flush requests. Allow (and don't clear) the needs_flush flag
if we have less than the element size accumulated.
Instead handle this in can_flush(), so it's triggered whenever we
have enough data to fill 1 element, or if the stream is closing
(seems a broken situation, but triggered by the caller).
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1198
XMaxRequestSize/XMaxExtendedRequestSize are documented to return
the maximum size in 4-byte units, whereas we are comparing this
to byte lenghts. We can afford 4x the data here.
Since I don't know the payload size of the XChangeProperty request,
be generous and allot 400 bytes for it, we have some to spare.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1198
When closing the lid of a laptop, we reconfigure all the monitors in order
to update the CRTCs and (if enabled) the global UI scaling factor.
To do this, we try first to reuse the current configuration for the usable
monitors, but if we have only monitor enabled and this one is on the laptop
lid we just end up creating a new configuration where the primary monitor is
the laptop one (as per find_primary_monitor() in MetaMonitorConfigManager),
but ignoring the user parameters.
In case the user selected a different resolution / scaling compared to the
default one, while the laptop lid is closed we might change the monitors
layout, causing applications to rescale or reposition.
To avoid this, when creating the monitors configuration from the current
current state, in case we have only one monitor available and that one is
the laptop panel, let's just reuse this configuration.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1200
Try to bypass compositing if there is a fullscreen toplevel window with
a buffer compatible with the primary plane of the monitor it is
fullscreen on. Only non-mirrored is currently supported; as well as
fullscreened on a single monitor. It should be possible to extend with
more cases, but this starts small.
It does this by introducing a new MetaCompositor sub type
MetaCompositorNative specific to the native backend, which derives from
MetaCompositorServer, containing functionality only relevant for when
running on top of the native backend.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
We need to coordinate with MetaCompositor during pre-paint so that we
have control over whether MetaLater callbacks happen first, or the
MetaCompositor pre-paint logic.
In order to do so, make MetaLater listen to a new signal "pre-paint" on
MetaCompositor, that is called MetaCompositors own pre-paint handling.
This fixes an issue where the top window actor was calculated after the
MetaCompositor pre-paint handling, meaning the top actor being painted
was out-of-date.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
Since the order of destruction during MetaDisplay tear down is a bit
unordered, there are pieces that try to destruct its compositing
dependent pieces (i.e. queued MetaLater callbacks) after MetaCompositor
has been cleaned up, meaning we need to put some slightly awkward NULL
checks to avoid crashing.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
MetaCompositor is the place in mutter that manages the higher level
state of compositing, such as handling what happens before and after
paint. In order for other units that depend on having a compositor
instance active, but should be initialized before the X11 implementation
of MetaCompositor registers as a X11 compositing manager, split the
initialization of compositing into two steps:
1) Instantiate the object - only construct the instance, making it
possible for users to start listening to signals etc
2) Manage - this e.g. establishes the compositor as the X11 compositing
manager and similar things.
This will enable us to put compositing dependent scattered global
variables into a MetaCompositor owned object.
For now, compositor management is internally done by calling a new
`meta_compositor_do_manage()`, as right now we can't change the API of
`meta_compositor_manage()` as it is public. For the next version, manual
management of compositing will removed from the public API, and only
managed internally.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
While at it, fix some style inconsistencies, for now use a single
singleton struct instead of multiple static variables, and
other non-functional cleanups. Semantically, there is no changes
introduced.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
This will check whether the current backing buffer is compatible with
the primary plane of the passed CoglOnscreen. Since this will extend the
time before a buffer is released, the MetaWaylandBufferRef is swapped
and orphaned if a new buffer is committed before the previous one was
released. It'll eventually be released, usually by the next page flip
callback.
Currently implemented for EGLImage and DMA-BUF buffer types.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
Advertising support for modifiers means we will most likely not not be
able to scan out client buffers directly, meaning it just as likely that
we won't be able to scan out even fullscreen windows without atomic KMS.
When we have atomic support, we should advertise support for modifiers
if atomic is used to drive the CRTCs, as we by then can check whether we
can scan out directly, place in an overlay plane, etc.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
While this is fairly incomplete, as to check things fully we need to use
TEST_ONLY in atomic to try out a complete assignment on the device, but
this works well enough for legacy non-modifier cases.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
Instead of always swapping buffers and flipping the back buffer, make it
possible to scan out a provided buffer directly without swapping any EGL
buffers.
A buffer is passed as an object implementing the empty CoglScanout
interface. It is only possible to do this in the native backend; and the
interface is implemented by MetaDrmBufferGbm. When directly scanned out,
instead of calling gbm_surface_lock_front_buffer() to get the gbm_bo and
fbid, get it directly from the MetaDrmBufferGbm, and use that to create
the page flip KMS update.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
Better to have the relevant object figure out whether it is a good
position to be unredirectable other than the actor, which should be
responsible for being composited.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
This removes the MetaWindowX11::priv pointer. It is replaced with a
meta_window_x11_get_private() helper function, and another method to get
the client rect without going through MetaWindowX11Private.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
Surface buffers are created with meta_drm_buffer_new_acquire(), taking a
gbm_surface acquiring the gbm itself, and meta_drm_buffer_new_take()
that takes over ownership of a passed gbm_bo.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
Currently a buffer use count always reaches zero before it is replaced.
This is due to the fact that at the point a new buffer is attached, the
last potential user releases it (the stage) since the currently
displayed frame has a composited copy of the buffer.
This may however change, if a buffer is scanned out directly, meaning it
should not be released until the page flip callback is invoked.
Prepare for this by making the buffer reference a heap allocated struct,
enabling us to keep a pointer to it longer than the buffer is attached.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
The CRTC level transform (not necessarily the hw transform) must be
taken into account when calculating the position of the CRTC in the
stage coordinate space, when placing the hw cursor, otherwise we'll
place the cursor as if the monitor was not rotated.
This wasn't a problem in the past, as with rotation, we always used the
OpenGL cursor, so the issue newer showed.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199
The port to per CRTC views was incomplete; we still used the logical
monitor layout as the stage view layout, while still using one view per
CRTC.
This worked fine for most cases, e.g. regular monitors, tiled or
non-tiled, transformed or non-transformed. Where it broke, however, was
when a monitor consists of multiple CRTCs. We already have the layout a
CRTC corresponds to on the stage kept with the CRTC metadata, so use
this directly.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1170https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199`
The CRTC level transform (i.e. not necessarily the one set on the
hardware) is what is relevant for calculating the layout the CRTC will
have on the stage, so only use the one that can be handled by the
hardware for the CRTC assignment.
This makes the CRTC layout valid for tiled monitors.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199
Previously the tile coordinate was used to offset a CRTC scanout
coordinate within a larger framebuffer. Since 3.36 we're always
scanning out from (0, 0) as we always have one framebuffer per CRTC; we
instead use the tile coordinate to calculate the coordinate the tile has
in the stage view. Adapt calculation to fulfil this promise instead of
the old one.
This also corrects the tiled custom monitor test case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199
test_client_new might return early if conditions are not met, leaving some
allocated data around without freeing it.
Since we're not using the client before, there's no need to initialize it early
and just initialize it when it's going to be returned.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1195
Dereference the loop variable rather than the original list head. This
fixes a regression introduced in 4413b86a3 ("backends: Replace
ClutterDeviceManager usage in favor of ClutterSeat", 2019-10-04) which
broke button scrolling with trackballs.
Closes:https://gitlab.gnome.org/GNOME/mutter/-/issues/1120
Most visible with xwayland-on-demand, at the time of setting things up
for X11 selections, we don't forward the current state. This makes the
first started X11 app oblivious to eg. the current clipboard.
Syncing selections up at the time of initializing the X11 selection
stuff ensures that doesn't happen.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1186
On VT switch, the devices are removed, which means for Wayland disabling
the keyboard.
When the keyboard is disabled, the associated `xkb_state` is freed and
recreated whenever the keyboard is re-enabled when switching back to the
compositor VT.
That means the `xkb_state` for Wayland is lost whereas the same for
clutter is kept, which causes to a discrepancy with locked modifiers on
VT switch.
To avoid that issue, preserve the XKB info only to dispose it when the
keyboard is eventually finalized.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/344https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1185
The motion events of tablets for example need to be mapped on the
selected screen area if the input device is configured to use only a
part of the active logical monitor.
To achieve this behavior each motion event is transformed using the
transformation matrix set for the input device.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1118
At some point we crossed the streams... In a short timespan we had
1f00aba92c merged, pushing WacomDevice to a common parent object,
and dcaa45fc0c implementing device grouping for X11.
The latter did not rely on the former, and just happened to
merge/compile without issues, but would promptly trigger a crash
whenever the API would be used.
Drop all traces of the WacomDevice internal to MetaInputDeviceX11.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1183
Currently we check whether a window is alive everytime it's focused.
This means that an application that doesn't respond to the check-alive
event during startup always showing the "application froze" dialog,
without the user ever trying to interact with it.
An example where this tends to to happen is with games, and for this
particular scenario, it's purely an annoyance, as I never tried to
interact with the game window in the first place, so I don't care that
it's not responding - it's loading.
To avoid these unnecessary particular "app-is-frozen" popups, remove the
alive check from the focus function, and instead move it back to the
"meta_window_activate_full()" call. To also trigger it slightly more
often, also add it to the path that triggers the window focus when a
user actively clicks on the window.
This means that we currently check whether a window is alive on:
* Any time the window is activated. This means e.g. alt-tab or
selecting the window in the overview.
* The user clicks on the window.
Note that the second only works for an already focused window on
Wayland, as on X11, we don't refocus it. This particular case isn't
changed with this commit, as we didn't call meta_window_focus() to begin
with here.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1182
This fixes an issue where a non-maximized screen casted window would be
stretched to fill the whole screen cast stream, instead of just the crop
that corresponds to the current window size.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1174
Picking now only happens on allocated actors, but the
callback in the actor-pick test is not waiting for the
stage to run an allocation cycle. Ideally, we'd wait
for this cycle, but for now, forcing an allocation works
as well.
Allocate the overlay actor in the actor-pick test.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1169
Normally we bail out in `sync_actor_geometry()`. The comment there
states:
```
Normally we want freezing a window to also freeze its position; this allows
windows to atomically move and resize together, either under app control,
or because the user is resizing from the left/top. But on initial placement
we need to assign a position, since immediately after the window
is shown, the map effect will go into effect and prevent further geometry
updates.
```
The signal for the initial sync originates in `MetaWindow` though and predates
`xdg_toplevel_set_maximized`, which again calls `meta_window_force_placement`,
triggering the signal too early. As a result, Wayland clients that start up
maximized have a wrong map animation, starting in the top-left corner.
In order to fix this without changing big parts of the geometry logic and risking
regressions, force the initial sync again before mapping.
Solution suggested by Jonas Ådahl.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1164
IBusInputContext/ClutterInputFocus/GtkIMContext all go for offset+len
for their ::delete-surrounding signals, with offset being a signed int
(neg. to delete towards left of selection, pos. to delete towards right
of selection) and len being an unsigned int from the offset (and
presumably, skipping the current selection).
The text-input protocols however pass in this event two unsigned integers,
one being the length of text to delete towards the left of the selection,
and another the length of text to delete towards the right of the selection.
To translate properly these semantics, positive offsets shouldn't account
for before_length, and negative offset+len shouldn't account for after_length.
The offset/length approach may of course represent deletions that are
detached from the current cursor/selection, we simply delete the whole range
from the cursor/selection positions then.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/517
The input method can assign a negative value to
clutter_input_method_delete_surrounding() to move the cursor to the left.
But Wayland protocol accepts positive values in delete_surrounding() and
GTK converts the values to the negative ones in
text_input_delete_surrounding_text_apply().
https://gitlab.gnome.org/GNOME/mutter/issues/539
GObject recommends to break references to other objects on dispose
instead of finalize, also we want to release the pressed virtual buttons
as early as possible if we know the object is getting destroyed.
So release the pressed buttons and unref our virtual
MetaInputDeviceNative when the dispose vfunc is called, which also
allows us to release the buttons immediately from javascript instead of
waiting for the garbage collector by calling run_dispose() on the
object.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1157
This allows us to screencast any window continuously, even
without it being visible. Because it's still being painted,
clients continue to receive frame callbacks, and people
are happy again.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1129
Just like what's done for monitor screencasting. Unfortunately, there's
no mechanism to share fences with PipeWire clients yet, which forces
us to guarantee that a frame is completed after blitting.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1129
MetaScreenCastWindowStreamSrc connects to the "damaged" signal of
MetaWindowActor. This signal is not exactly tied to the paint cycle
of the stage, and a damage may take quite a while to arrive when
a client doesn't want to draw anything. For that reason, the window
screencast can start empty, waiting for a damage to arrive.
Ensure at least one frame is recorded when enabling the window stream.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1097https://gitlab.gnome.org/GNOME/mutter/merge_requests/1129
cogl_framebuffer_push_rectangle_clip() acts on the current modelview
matrix. That means the result of clipping then translating will be
different of the result of translating then clipping.
What we want for window screencasting is the former, not the latter.
Move the translation code (and associated) to after clipping.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1097https://gitlab.gnome.org/GNOME/mutter/merge_requests/1129
When calculating the transform we should apply to the cursor sprite
before uploading it to the cursor plane, we must also take into
account non upright mounted LCD panels.
Otherwise the cursor ends up 90 degrees rotated on devices where the
LCD panel is mounted 90 degrees rotated in its enclosure.
This commit fixes this by calling meta_monitor_logical_to_crtc_transform
in get_common_crtc_sprite_transform_for_logical_monitors to adjust the
transform for each Monitor in the LogicalMonitor.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1123https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1153
Support for them appears to be way less common than e.g. png, which is
currently the preferred format from Firefox, Chromium, Libreoffice and others.
Adopt to that fact.
As a side effect, this works around a bug observed when copying images in
Firefox on Wayland.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1141
When resizing a window interactively, we'll set a grab operation and a
grab window, among other things. If we're resizing (including setting
initial size, i.e. mapping) another window, that didn't change position,
don't use the gravity of the grab operation when resizing our own
window.
This fixes an issue with jumpy popup position when moving a previously
mapped gtk popover.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/999
The transactional KMS API has been modelled after atomic KMS. Atomic KMS
currently doesn't support forwarding cursor hotspot metadata, thus it
was left out of the transactional KMS API having the user set the simply
create a plane assigment with the cursor sprite assigned to a cursor
plane using regular coordinates.
This, however, proved to be inadequate for virtual machines using
"seamless mouse mode" where they rely on the cursor position to
correspond to the actual cursor position of the virtual machine, not the
cursor plane. In effect, this caused cursor positions to look "shifted".
Fix this by adding back the hotspot metadata, right now as a optional
field to the plane assignment. In the legacy KMS implementation, this is
translated into drmModeSetCursor2() just as before, while still falling
back to drmModeSetCursor() with the plane coordinates, if either there
was no hotspot set, or if drmModeSetCursor2() failed.
Eventually, the atomic KMS API will learn about hotspots, but when
adding our own atomic KMS backend to the transacitonal KMS API, we must
until then still fall back to legacy KMS for virtual machines.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1136
When calculating the resource scale of a clone source, we might end up
in situations where we fail to do so, even though we're in a paint. A
real world example when this may happen if this happens:
* A client creates a toplevel window
* A client creates a modal dialog for said toplevel window
* Said client commits a buffer to the modal before the toplevel
If GNOME Shell is in overview mode, the window group is hidden, and the
toplevel window actor is hidden. When the clone tries to paint, it fails
to calculate the resource scale, as the parent of the parent (window
group) is not currently mapped. It would have succeeded if only the
clone source was unmapped, as it deals with the unmapped actor painting
by setting intermediate state while painting, but this does not work
when the *parent* of the source is unmapped as well.
Fix this by inheriting the unmapped clone paint even when calculating
the resource scale.
This also adds a test case that mimics the sequence of events otherwise
triggered by a client. We can't add a Wayland client to test this, where
we actually crash is in the offscreen redirect effect used by the window
dimming feature in GNOME Shell.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/808https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1147
For HiDPI pointer cursors backed by Wayland surfaces, the hotspot must
be placed using integers on the logical pixel grid. In practice what
this means is that if the client loads a cursor sprite with the buffer
scale 2, and it's hotspot is not dividable by 2, it will be rounded
down to an integer that can. E.g. a wl_surface with buffer scale 2 and a
cursor image with hotspot coordinate (7, 7) will have the coordinate
(3.5, 3.5) in surface coordinate space, and will in practice be rounded
down to (3, 3) as the hotspot position in wl_pointer only takes
integers.
To not potentially shift by 1 pixel on HiDPI monitors when switching
between wl_surface backend cursor sprites and built-in ones, make the
built in one emulate the restrictions put up by the Wayland protocol.
This also initializes the theme scale of the xcursor sprite instances to
1, as they may not have been set prior to being used, it'll only happen
in response to "prepare-at" signals being emitted prior to rendering.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1092https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1107
We checked that the content size was appropriately painted in the stage,
but didn't take into account that the size of the sampled texture
region, meaning that when stage views were scaled, we'd think that we
would draw a texture scaled, as e.g. a 200x200 sized texture with buffer
scale 2 would have the size 100x100. When stage views were not scaled,
we'd apply a geometry scale meaning it'd end up as 200x200 anyway, thus
pass the check, but when stage views are scaled, it'd still be painted
as a 100x100 shaped texture on the stage, thus failing the
are-we-unscaled test.
Fix this by comparing the transformed paint size with the sampled size,
instead of the paint size again, when checking whether we are being
painted scaled or not. For example, when stage views are scaled, our
200x200 buffer with buffer scale 2, thus content size 100x100 will
transform to a 200x200 paint command, thus passing the test. For
non-scaled stage views, our 200x200 buffer with buffer scale 2 thus
content size 100x100 will also transform into a 200x200 paint command,
and will also pass the check, as the texture sample region is still
200x200.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/804https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1124
A user may have configured an output to be panning, e.g. using xrandr
--output <output> --mode <mode> --panning <size>. Respect this by making
the logical monitor use the panning size, instead of the mode. This
makes e.g. makes the background cover the whole panning size, and panels
etc will cover the whole top of the panned area, instead of just the top
left part covering the monitor if having panned to (0, 0).
No support is added to configuring panning, i.e. a panned monitor
configuration cannot be stored in monitors.xml.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1085
This is so that cogl-trace.h can start using things from cogl-macros.h,
and so that it doesn't leak cogl-config.h into the world, while exposing
it to e.g. gnome-shell so that it can make use of it as well. There is
no practical reason why we shouldn't just include cogl-trace.h via
cogl.h as we do with everything else.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1059
The upper layers (OSDs basically) want to know the monitor that a
tablet is currently assigned to, not the monitor just as configured
through settings.
This broke proper OSD positioning for display-attached tablets since
commit 87858a4e01, as the MetaInputMapper kicks in precisely when
there is no configured monitor for the given device.
Consulting both about the assigned output will make OSDs pop up
again in the right place.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/971
We used to inhibit all pad actions while the OSD is shown, but one we
would actually want to handle are mode switches while the OSD is open.
So it has an opportunity to catch up to the mode switch.
This lets MetaInputSettings reflect the mode switch (eg. when querying
action labels), so the OSD has an opportunity to update the current
actions.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/975
Commit cda9579034 fixed a corner case when setting the initial workspace
state of transient windows, but it still missed a case:
should_be_on_all_workspaces() returns whether the window should be on all
workspaces according to its properties/placement, but it doesn't take
transient relations into account.
That means in case of nested transients, we can still fail the assert:
1. on-all-workspaces toplevel
2. should_be_on_all_workspaces() is TRUE for the first transient's parent,
as the window from (1) has on_all_workspaces_requested == TRUE
3. should_be_on_all_workspaces() is FALSE for the second transient's
parent, as the window from (2) is only on-all-workspace because
of its parent
We can fix this by either using the state from the root ancestor
instead of the direct transient parent, or by using the parent's
on_all_workspaces_state.
The latter is simpler, so go with that.
https://gitlab.gnome.org/GNOME/mutter/issues/1083
This class sits between ClutterInputDevice and the backend implementations,
it will be the despositary of features we need across both backends, but
don't need to offer through Clutter's API.
As a first thing to have there, add a getter for a WacomDevice. This is
something scattered across and somewhat inconsistent (eg. different places
of the code create wacom devices for different device types). Just make it
here for all devices, so users can pick.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1109
Most people just see a harmless warning when applying this setting to
all touchpads (which this patch fixes). But tap[-and-drag] is supposed
to remain enabled for display-less Wacom tablets, despite configuration
changes.
Fix this by using the mapping function, so the setting is forced on for
wacom devices. This happens on a per-device basis, so the warning is
gone too.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1145
This fixes a case that was overlooked in
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1036 - when we
have a geometry scale > 1 and Wayland subsurfaces that have an offset
to their parent surface (which is often the case when the toplevel surface
includes decoration/shadows etc.), we have to add extra offset to their
opaque regions so they match their 'visible' location.
This is necessary as `meta_cullable_cull_out_children` moves the coordinate
system during culling, but does not know about geometry scale.
Also, remove the redundant check for `window_actor` - we only hit this code
path if a `window_actor` culls out its children.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1108
Some tablets like the Cintiq 24HDT have several mode switch buttons
per group. Those are meant to jump straight to a given mode, however
we just handle cycling across modes (as most other tablets have a
single mode switch button per group).
So spice up the mode switch handling so we handle multiple mode
switch buttons, assigning each of them a mode. If the device only
has one mode switch button, we do the old-fashioned cycling.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/970
This error was just logged but not raised. Do as the code comment said
and raise a pipe error at that moment, and for subsequent operations
on the output stream (although none besides close() should be expected
after propagating the error properly).
Related: https://gitlab.gnome.org/GNOME/mutter/issues/1065
When a page flip fails with a certain error code, we've treated this as
a hint that page flipping is broken and we should try to use mode
setting instead.
On some drivers, it seems that this error is also reported when there
was no mode set, which means we'll have no cached mode set to use in the
fallback. The lack of prior mode set tends to happen when we hit a race
when the DRM objects change before we have the time to process a hotplug
event.
Handle the lack a missing mode set in the flip fallback path, with the
assumption that we'll get a hotplug event that'll fix things up for us
eventually.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/917
Both IBus and ClutterInputFocus work in character offsets for the cursor
position in the preedit string. However the zwp_text_input protocol does
define the preedit string cursor offset to be in bytes.
Fixes client bugs in representing the caret within the preedit string,
as we were clearly giving the wrong offset.
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/2517https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1132
We send configure events for state changes e.g. for `appears-focused`,
etc. What we don't want to do is to do this for popup windows, as in
Wayland don't care about this state.
When the focus mode was configured to "sloppy focus" we'd get
`appears-focused` state changes for the popup window only by moving the
mouse cursor around, and while a popup may care about focus, it does not
care about related appearance, as there is no such state in xdg_popup.
What these state changes instead resulted in was absolute window
configuration events, intended for toplevel (xdg_toplevel) windows. In
the end this caused the popup to be positioned aginst at (0, 0) of the
parent window, as the assumptions when the configuration of the popup
was acknowledged is that it had received a relative position window
configuration.
Fix this by simply ignoring any state changes of the window if it is a
popup, meaning we won't send any configuration events intended for
toplevels for state changes. Currently we don't have any way to know
this other than checking whether it has a placement rule. Cleaning up
MetaWindow creation is left to be dealt with another day.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1103https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1122
If the CRTCs the cursor is visible on do not share a common scale
and transform, we can't use the cursor hardware plane as we only have one.
We therefore fall back to software / gl cursor.
The check for that currently happens after we tried to upload the cursor image
to the hardware plane though.
This is made worse by the fact that in the scaling step, where we scale the
cursor image to the desired size, until now we expected a valid common scale -
otherwise scaling the image by an uninitialized float.
Make sure we bail out early during the scale/upload step if we don't have common
scales and transforms - to avoid that bug and save some unnecessary work.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1125
Make sure it is only the special modifier (hardcoded to 1 currently)
which is being pressed (not counting locked modifiers) before notifying
that the special modifier is pressed, as we are interested in it being
pressed alone and not in combination with other modifier keys.
This helps in two ways:
- Pressing alt, then ctrl, then releasing both won't trigger the locate
pointer action.
- Pressing alt, then ctrl, then down/up to switch workspace won't interpret
the last up/down keypress as an additional key on top of the special ctrl
modifier, thus won't be forwarded down to the focused client in the last
second.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/812https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1014
If you first press a key that triggers the "special modifier key" paths
(ctrl, super), and then press another key that doesn't match (yet?) any
keybindings (eg. ctrl+alt, super+x), the second key press goes twice
through process_event(), once in the processing of this so far special
combination and another while we let the event through.
In order to keep things consistent, handle it differently depending on
whether we are a wayland compositor or not. For X11, consider the event
handled after the call to process_event() in process_special_modifier_key().
For Wayland, as XIAllowEvents is not the mechanism that allows clients see
the key event, we can just fall through the regular paths, without this
special handling.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1014
There is a race where an output can be used as a fullscreen target, but
it has already been removed due to a hotplug. Handle this gracefully by
ignoring said output in such situations.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1120
To keep consistent and avoid confusion, rename the function:
`meta_window_x11_buffer_rect_to_frame_rect()`
to:
`meta_window_x11_surface_rect_to_frame_rect()`
As this function doesn't deal with the `window->buffer_rect` at all.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
The code in `build_and_scan_frame_mask` predates the introduction of the
`MetaShapedTexture` API to get the texture width hand height.
Use the new `meta_shaped_texture_get_width/height` API instead of using
the CoGL paint texture.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
For X11 clients running on Wayland, the actual texture is set by
Xwayland.
The shape, input and opaque regions, however are driven by X11
properties meaning that those may come at a different time than the
actual update of the content.
This results in black areas being visible at times on resize with
Xwayland clients.
To make sure we update all the regions at the same time the buffer is
updated, update the shape, input and opaque regions when the texture is
committed from when the Xwayland surface state is synchronized.
That fixes the remaining black areas being sometimes visible when
resizing client-side decorations windows on Xwayland.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/1007https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
For X11 clients running on Xwayland, the opaque, input and shape regions
are processed from different properties and may occur at a different
time, before the actual buffer is eventually committed by Xwayland.
Add a new API `update_regions` to window actor to trigger the update of
those regions when needed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
Commit 7dbb4bc3 cached the client area when the client was frozen.
This is not sufficient though, because the buffer size might still be
lagging waiting for the buffer from Xwayland to be committed.
So instead of caching the client size from the expected size, deduce the
client area rectangle from the surface size, like we did for the frame
bounds in commit 1ce933e2.
This partly reverts commit 7dbb4bc3 - "window-actor/x11: Cache the
client area"
https://gitlab.gnome.org/GNOME/mutter/issues/1007https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
Listen for GPU hotplug events to initialize their cursor support.
This fixes one reason for why DisplayLink devices may not be using a hardware
cursor. Particularly, when a DisplayLink device is hotplugged for the first
time such that EVDI creates a new DRM device node after gnome-shell has already
started, we used to forget to initialize the cursor support.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1097
Extract the code to initialize a single GPU cursor support into its own
function. The new function will be used by GPU hotplug in the future.
This is a pure refactoring without any behavioral changes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1097
For every stream src, we created and attached a GSource. Upon stream
src destruction, we g_source_destroy():ed the GSource. What
g_source_destroy() does, hawever, is not really "destroy" it but only
detaches it from the main context removing the reference the context had
added for it via g_source_attach(). This caused the GSource to leak,
although in a detached state, as the reference taken on creation was
still held.
Fix this by also removing our own reference to it when finalizing.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1106
PipeWire will be unable to dequeue a buffer if all are already busy.
This can happen for valid reasons, e.g. the stream consumer not being
fast enough, so don't complain in the journal if it happens.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1115
While we will always have cursor planes, as we'll currently create fake
ones when real ones are missing (See #1058), eventually we will run into
situations where we can't create fake ones, for example for atomic KMS
drivers that don't advertise any cursor planes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1079
If we don't force the placement, we enter the constrain machinery with
the position (0, 0), meaning we always get the "current work area" setup
to correspond to whatever logical monitor was at that position.
Avoid this by doing the same as "meta_window_force_placement()" and set
"window->calc_placement" to TRUE while move-resizing, causing the
move-resize to first calculate the initial position.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1098https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1110
This commit completes the implementation of `xdg_wm_base` version 3,
which introduces support for synchronized implicit and explicit popup
repositioning.
Explicit repositioning works by the client providing a new
`xdg_positioner` object via a new request `xdg_popup.reposition`. If the
repositioning is done in combination with the parent itself being
reconfigured, the to be committed state of the parent is provided by the
client via the `xdg_positioner` object, using
`xdg_positioner.set__parent_configure`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
This sets the `is_reactive` flag on the window placement rules, causing
the popups to be reconfigured as they are affected by environmental
changes, such as the parent moving in a way making the popup partially
offscreen.
As with synchronization, the implementation is dormant, as the
version of the advertised global isn't bumped yet, as the new protocol
version is not yet fully implemented.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
This commits adds support on the MetaWindow and constraints engine side
for asynchronously repositioning a window with a placement rule, either
due to environmental changes (e.g. parent moved) or explicitly done so
via `meta_window_update_placement_rule()`.
This is so far unused, as placement rules where this functionality is
triggered are not yet constructed by the xdg-shell implementation, and
no users of `meta_window_update_placement_rule()` exists yet.
To summarize, it works by making it possible to produce placement rules
with the parent rectangle a window should be placed against, while
creating a pending configuration that is not applied until acknowledged
by the client using the xdg-shell configure/ack_configure mechanisms.
An "temporary" constrain result is added to deal with situations
where the client window *must* move immediately even though it has not yet
acknowledged a new configuration that was sent. This happens for example
when the parent window is moved, causing the popup window to change its
relative position e.g. because it ended up partially off-screen. In this
situation, the temporary position corresponds to the result of the
movement of the parent, while the pending (asynchronously configured)
position is the relative one given the new constraining result.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
MetaGravity is an enum, where the values match the X11 macros used for
gravity, with the exception that `ForgetGravity` was renamed
`META_GRAVITY_NONE` to have less of a obscure name.
The motivation for this is to rely less on libX11 data types and macros
in generic code.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
A placement rule placed window positions itself relative to its parent,
thus converting between relative coordinates to absolute coordinates,
then back to relative coordinates implies unwanted restrictions for
example when the absolute coordinate should not be calculated againts
the current parent window position.
Deal with this by keeping track of the relative position all the way
from the constraining engine to the move-resize window implementation.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
To organize things a bit better, put the fields related to the placement
rule state in its own anonymous struct inside MetaWindow. While at it,
rename the somewhat oddly named variable that in practice means the
current relative window position.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
After popup placement rules have gone through the constraints engine has
ended up resulting in an actual move, pass the window configuration down
the path using relative coordinates, as that is what the next layer
(xdg-shell implementation) actually cares about.
In the future, this will also be helpful when the configured position is
not against the current state of the parent.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
A placement rule is always about placing a window relative to its
parent. In order to eventually place it against predicted future parent
positions, make the placement rule processing output relative
coordinates, having the caller deal with turning them into absolute.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
meta_window_wayland_finish_move_resize() inhibited window moves to be
finished if there was a resize grab active at the time, in order to
handle window resizing. Change this to only affect the grabbed window
itself, so that e.g. a popup can be positioned according to a pending
configuration while there is an active resize grab.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
This is made a signal, so the upper layers (read: gnome-shell) may
decide what services to spawn. The signal argument contains a task
that will resume MetaX11Display startup after it is returned upon.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/945
This is used by GDK and the X11 bits, but may also be used for
other initialization services we might need to run along with
Xwayland initialization.
However, as the -initfd argument in Xwayland is a fairly new
feature, add some meson build-time checks so that the feature
is handled transparently while allowing to explicitly set/unset
it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/945
This shape region culling was wrongly implemented in f5a28aa9, as it
does not take frame offsets into account, and is also redundant, as
we already set the opaque region of the underlying surface accordingly.
The other parts were implemented in ac7aa114, the reason given in
the commit message:
```
Wayland clients do this through the opaque region in the surface
actor. However X11 clients were considered fully transparent for
culling purposes, which may result in mutter painting other bits
of the background or other windows that will be painted over in
reality.
```
is wrong though - culling on X11 actors works just fine and did only
not work in Wayland sessions because of a bug that got fixed in
19814497.
In conclusion the whole part appears to be redundand and some testing
done suggests the same. Drop it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1082
If a opaque region is explicitly set we should not consider the surface
opaque, as that implies e.g. a shape region is set.
If no opque region is set but the texture does not have an alpha channel,
we can savely cull it out.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1082
We want sysprof's exact datadir for compatability with
platforms where software is installed into their own
individual immutable prefix's. Such that, mutter's prefix will
never equate to sysprof's. This depends on a MR in sysprof [0]
which adds datadir to its pkgconfig files, as these files will always
have the proper path we want.
This adds version a constraint on sysprof_dep, as datadir was added to
the .pc in this version.
[0]: https://gitlab.gnome.org/GNOME/sysprof/merge_requests/19https://gitlab.gnome.org/GNOME/mutter/merge_requests/957
Given that on Wayland we are pretty much guaranteed to finish MetaX11Display
setup after the MetaCompositor is enabled, we may drop the
meta_compositor_manage() x11 initialization bits, and move them into the
MetaX11Compositor subclass where it's actually needed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
We artificially made Xwayland initialization synchronous, as we used
to rely on MetaX11Display and other bits during meta_display_open().
With support for Xwayland on demand and --no-x11, this is certainly
not the case.
So drop the main loop surrounding Xwayland initialization, and turn
it into an async operation called from meta_display_init_x11(). This
function is turned then into the high-level entry point that will
get you from no X server to having a MetaX11Display.
The role of meta_init() in Xwayland initialization is thus reduced
to setting up the sockets. Notably no processes are spawned from here,
deferring that till there is a MetaDisplay to poke.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
This ATM completes the task right away, but we will want to do
further things here that are asynchronous in nature, so prepare
for this operation being async.
Since the X11 backend doesn't really need this, make it go on
the fast lane and open the MetaX11Display right away, the case
of mandatory Xwayland on a wayland session is now handled
separately.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
With Xwayland initialization going async, these errors will seep
into the parts controlled by g_test*(), resulting in the harmless
errors about DBus names not acquired turned fatal.
Set an error log handler, and specifically ignore those.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
It might not be available right on initialization time if X11 is started
asynchronously. As this is a requirement for our tests, ensure it is there
before proceeding with the test.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
This used to be set on meta_compositor_manage(), but only if there is a
MetaX11Display. Given meta_display_init_x11() is Wayland only, and we can
always assume compositing to be enabled, just have it invariably set after
the X server is up.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
Even though cogl_framebuffer_flush() was supposed to be enough,
it ends up creating streams with odd visual glitches that look
very much like unfinished frames.
Switch back to cogl_framebuffer_finish(), which is admittedly
an overkill, but it's what works for now. There is anedoctal
evidence showing it doesn't incur in worse performance.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
Much like monitor streaming, implement window streaming by
making the window actor draw itself with a paint context
that used the passed framebuffer.
Now that all MetaScreenCastStreamSrc subclasses implement
blit_to_framebuffer, remove the conditional check from
meta_screen_cast_stream_src_blit_to_framebuffer().
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
Implement PipeWire's add_buffer and remove buffer, try and export
a DMA buffer first and, on failure, fallback to memfd.
When DMA buffers are successfully created and shared, blit the
framebuffer contents when drawing instead of downloading the pixels.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
Create a new gbm_bo using the same given geometry, and export the new
bo's DMA buffer fd. The new bo lives as long as necessary to be used,
and reused, by PipeWire.
Unfortunately, PipeWire doesn't support modifiers properly, so use the
linear format for now. For now, a hardcoded format of DRM_FORMAT_XRGB8888
is set, so we don't need to negotiate the format with PipeWire early.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
If the cursor sprite does not match the scale factor or transformation
of the monintor, we currently fall back to a software cursor, causing
redraws of the shell. This commit implements scaling and transforming
of the cursor sprite, so we can use it with hardware planes, too.
This commit does the following steps:
1. Make sure we reupload the cursor image if the cursor is over
a logical monitor not matching the scale or transform from the previous
update.
2. Before upload to the hardware plane, scale and transform the cursor
image if possible and necessary.
3. Make sure we always use the hardware cursor if possible (only fall
back to software/OGL cursor if it is visible on multiple logical monitors
with differet scales/transforms).
4. Transform or scale the cursor coordinates if necessary.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/526
In Wayland clients can commit transformed surfaces, so the compositor
can directly use them on hardware planes. We already support that
for other surfaces, this is the first step to also support it on
cursor sprites.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/526
This may be used indirectly before creation as we dispatch libinput events
right after creation (to let input devices be known), so those device
additions would trigger the touch-mode checks.
Creating it in advance results in checks being correctly performed, although
redundantly.
Spotted by Bastien Nocera.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/1067
When applying a configuration to XRANDR, we first disable CRTCs that
happen to extend outside of the to-be X11 screen size. While doing so,
we fail to actually check whether the CRTC is active or not, meaning
we'll try to query the content of the CRTC configuration even though it
has none, leading to a NULL pointer dereference.
Fix this by simply ignoring non-configured CRTCs.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1093
Instead of users fetching it via `clutter_stage_get_redraw_clip()`, pass
it via the paint context. This is helpful as it is only valid during a
paint, making it more obvious that it needs to be handled differently
when there is no redraw clip (i.e. we're painting off-screen).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
Prior to this commit the stage was drawn separately for each logical
monitor. This allowed to draw different parts of the stage with
different transformations, e.g. with a different viewport to implement
HiDPI support.
Go even further and have one view per CRTC. This causes the stage to
e.g. draw two mirrored monitors twice, instead of using the same
framebuffer on both. This enables us to do two things: one is to support
tiled monitors and monitor mirroring using the EGLStreams backend; the
other is that it'll enable us to tie rendering directly to the CRTC it
will render for. It is also a requirement for rendering being affected
by CRTC state, such as gamma.
It'll be possible to still inhibit re-drawing of the same content
twice, but it should be implemented differently, so that it will still
be possible to implement features requiring the CRTC split.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
To make it more reliable to distinguish between values that are read
from the backend implementation (which is likely to be irrelevant for
anything but the backend implementation), split out those values (e.g.
layout).
This changes the meaning of what was MetaCrtc::rect, to a
MetaCrtcConfig::layout which is the layout the CRTC has in the global
coordinate space.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1042
On x11 we emulate pointer events from touch events as long as there's
only one touchpoint on screen, this obviously leads to x11 sending us
crossing events triggered by the emulated pointer. Now if we get a leave
event and set the stage of the ClutterInputDevice to NULL, new touch
events will be discarded by clutters backend because the core pointer
doesn't have a stage associated. This means Mutter completely loses
state of a touchpoint as soon as it crosses a shell actor.
An easy reproducer for this issue is to start the four-finger-workspace
gesture above a window and to move the pointer emulating touch outside
of the window, this will freeze the gesture as the gesture no longer
receives touch events.
To fix this, stop tracking stage changes on crossing events and simply
leave the ClutterInputDevice stage as-is. In our case there is only one
stage anyway and that won't change in the future.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/423
Remove the rather useless callback function that's currently used for
handling the "visibility-changed" signal and instead connect to the
signal using `g_signal_connect_swapped()`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1077
The check-alive feature is there for the user to be able to terminate
frozen applications more easily. However, sometimes applications are
implemented in a way where they fail to be reply to ping requests in a
timely manner, resulting in that, to the compositor, they are
indistinguishable from clients that have frozen indefinitely.
When using an application that has these issues, the GUI showed in
response to the failure to respond to ping requests can become annoying,
as it disrupts the visual presentation of the application.
To allow users to work-around these issues, add a setting allowing them
to configure the timeout waited until an application is considered
frozen, or disabling the check completely.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1080
`meta_xwayland_surface_get_relative_coordinates()` may cause a crash if
the Xwayland surface has no window associated.
That can be observed when using drag and drop from an X11 window to a
Wayland native window:
```
at src/core/window.c:4503
at src/wayland/meta-xwayland-surface.c:200
at src/wayland/meta-wayland-surface.c:1517
at src/wayland/meta-wayland-pointer.c:1048
at src/wayland/meta-wayland-pointer.c:840
at src/wayland/meta-wayland-pointer.c:865
at src/wayland/meta-wayland-pointer.c:954
at src/wayland/meta-wayland-pointer.c:456
at src/wayland/meta-wayland-pointer.c:993
at src/wayland/meta-wayland-data-device.c:1004
at src/wayland/meta-wayland-data-device.c:1278
at src/wayland/meta-xwayland-dnd.c:326
```
Check if the xwayland surface has an associated MetaWindow prior to get
its buffer rect.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1073
The cancellable of a request might already be cancelled by the time
the cancelled_cb is connected resulting in finish_cb being called via
ca_context_cancel before g_cancellable_connect returns. In this case
the request that is written to has already been freed.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/1060
On a Surface Pro 2017, touch-mode is currently only detected correctly
after detaching and attaching the Type Cover (detachable keyboard) once,
it seems that `has_external_keyboard` is only set to the correct value
after MetaSeatNative is initialized.
So fix that and call `update_touch_mode()` once again when the object is
initialized and the `has_external_keyboard` and `has_touchscreen`
properties have been finally updated.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1075
Which offscreens actor rendering only in cases where it hasn't changed for
2 frames or more. This avoids the performance penalty of offscreening an
actor whose content is trying to animate at full frame rate. It will
switch automatically.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1069
It is only useful for clients that do not set an opaque region but
still can be detected as being opaque. This is helpful for X11 clients
as opaque regions only got introduced around 2012 and only as part of EWMH
and are thus not used in many cases.
On Wayland however opaque regions have been part of the core protocol from the
beginnig and we can assume they are used more commonly.
As the current implementation in `MetaWindowActor` does not handle Wayland
subsurfaces well, instead of adding more complexity just move it to
`MetaWindowActorX11`.
While on it, take the shape region into account that is set when clients
use the X Nonrectangular Window Shape Extension Protocol, so we have exact
culling with those clients.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1058
Allow screen casters (e.g. VNC remote desktop services) to ask for
animations to be inhibited, in order to lower the number of frames sent
over the network.
Currently only sets a field on the screen cast session object. Later
it'll be exposed via the remote access handle and via D-Bus by
gnome-shell.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/838
There are two surface roles owning a MetaWindow: MetaWaylandShellSurface
(basis of MetaWaylandXdgToplevel, MetaWaylandXdgPopup,
MetaWaylandWlShellSurface, etc), and MetaXwaylandSurface.
With these two role types, the MetaWindow has two different types of
life times. With MetaWaylandShellSurface, the window is owned and
managed by the role itself, while with MetaXwaylandSurface, the
MetaWindow is tied to the X11 window, while the Wayland surface and its
role plays more the role of the backing rendering surface.
Before, for historical reasons, MetaWindow was part of
MetaWaylandSurface, even though just some roles used it, and before
'wayland: Untie MetaWindowXwayland lifetime from the wl_surface' had
equivalent life times as well. But since that commit, the management
changed. To not have the same fied in MetaWaylandSurface being managed
in such drastically different ways, rearrange it so that the roles that
has a MetaWindow themself manages it in the way it is meant to; meaning
MetaWaylandShellSurface practically owns it, while with Xwayland, the
existance of a MetaWindow is tracked via X11.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/835
The role determines how a relative coordinate is calculated. More
specifically, using clutters API to transform coordinates is only
accurate right after a clutter layout pass but this function is used
e.g. to deliver pointer motion events which can happen at any time. This
isn't a problem for Wayland clients since they don't control their
position, but X clients do and we'd be sending outdated coordinates if a
client is moving a window in response to motion events.
This was already done already, but now move the Xwayland specific logic
to the Xwayland surface role, keeping the generic transformation logic
in the generic actor surface role.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/835
The shell surface role is the one where subsurfaces may exist, and it
has direct relation to the MetaWindowActorWayland which currently has
the subsurface stacking logic.
Instead of directly finding the window actor when dealing with
subsurfaces, notify the parent surface that the subsurface state
changed, so that it can outsource the application of this information to
the role. For subsurface roles, this simply means forward upward to the
parent; for shell surface roles, this means regenerate the surface actor
layering.
This allows us to move away from accessing the window directly from the
surface, which in turn allows us to change the ownership structure of
windows.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/835
If a window already is being pinged, it doesn't make sense to send more
pings to the window, instead we should just wait for that answer or
timeout until we send a new one.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/891
Using a timestamp twice in a row (e.g. when activating two windows in
response to the same event or due to other bugs) will break the window
detection and show a close dialog on the wrong window. This is a grave
error that should never happen, so check every timestamp before sending
the ping for uniqueness and if the timestamp was already used and its
ping is still pending, log a warning message and don't send the ping.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/891
Increase the number of checks whether a window is still responsive and
ping windows on every call to `meta_window_focus()` instead of
`meta_window_activate_full()`. This ensures the window is also pinged in
case normal interaction like clicks on the window happen and a close
dialog will eventually get shown.
Related https://gitlab.gnome.org/GNOME/mutter/issues/395https://gitlab.gnome.org/GNOME/mutter/merge_requests/891
Currently when a window is requested to be unredirected, the
corresponding pixmap and texture can get cleared before the window has
been unredirected by the X server. This can result in the windows behind
showing through which causes a short flicker after showing an OSD or
notification when a fullscreen application is running.
Fix this by ensuring the texture is only cleared after the window has
been unredirected by the server.
Similarly when the window is being redirected again, the pixmap of the
window can only be requested after the redirection has been completed by
the server. This currently can happen in a different frame than the next
redraw of the actor resulting in an empty texture until the next redraw.
Fix this by queuing a redraw immediately after redirecting.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/997
By default clutter will show an actor as it is added to a parent. This
means that after we create the window actor, when it's added to the
window group, we implicitly show it. What we really want is to not show
it until the window is supposed to be shown, which happens when
meta_window_actor_show() is called, as showing prior to that, could
cause issues.
Avoid the implicit show by setting the "show-on-set-parent" property on
the window actor to `FALSE` on window actor construction.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1066
We didn't log what we enabled, just g_info():ed what failed to be
enabled. Change this to g_warning() what failed to be enabled, and
g_message() on what was enabled, so that both will be visible in the
logs.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1061
We preserve the core one, which represents the union of all input
devices. It might make sense to make this per-seat in the future,
but certainly the per-device granularity is unused (at last!) and
useless.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1039
XWayland clients get their opaque region set from their window, not the
surface. Doing both resulted in the surface constantly overwriting the
opaque region - effectively disabling culling of XWayland clients.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1049
Devices have capabilities that other parts need to know about. Instead
of having them probe using drmMode* API, outsource this to
MetaKmsDevice. Currently the only capability tracked is HW cursor size.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/930
Turns the cursor setting and movement into cursor plane assignment
primitives. In the current simple implementation, this in turn
translates into legacy drmModeSetCursor() and drmModeMoveCursor() calls.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/930
A cursor plane can now be assigned, and for the simple KMS
implementation, it'll translate into drmModeSetCursor() and
drmModeMoveCursor() calls.
When assignments failed, the cursor planes that failed to be assigned
are communicated via the feedback object.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/930
The current API as all synchronous, so they can be made to return
feedback immediately. This will be needed for the cursor renderer which
needs to know whether it should fall back to OpenGL cursor rendering.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/930
meta_kms_update_process_..() makes it sound like it's a MetaKmsUpdate
function called update_..() but in fact it's a MetaKms function that
calls the corresponding process-update impl function. Clear up this
naming confusion.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/930
The frame bounds as returned by `meta_window_actor_get_frame_bounds()`
would be used as cropping values when streaming a window content.
But, as its name implies, it returns the actual frame bounds, whereas we
may want to include the whole buffer, to include client side shadows for
example.
Rename the `get_frame_bounds()` API to `get_buffer_bounds()` (which was
previously partly removed with commit 11bd84789) and return the actual
buffer bounds to use as the cropping area when streaming a window.
Fixes: 931934511 - "Implement MetaScreenCastWindow interface"
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1022
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/1018
The clip bounds passed in `meta_window_actor_capture_into()` represent
the actual allocated buffer size where the window actor image will be
eventually copied.
As such, it is completely agnostic to the scaling factors that might
affect the different surface actors which compose the window actor.
So instead of trying to compute the scale factor by which the given
clipping bounds need to be adjusted, simply clip the resulting image
based on the given bounds to make sure we never overflow the destination
buffer.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1022
This taps on:
1) Touchscreen availability
2) Availability of external keyboards
3) Tablet mode switch, if existent
So we get this property enabled whenever it makes sense to show touch
focused features (eg. the OSK).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1044
During compilation, gen_default_modes.py shows two warnings that
say that a comparison is using 'is' instead of '=='.
This patch fixes this bug.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/985
The actors of Wayland subsurfaces are set to be reactive on creation,
when receiving the `wl_subcompositor.get_subsurface` request.
However, if a client creates several subsurfaces and then creates the
xdg_toplevel object after, the previous subsurface actors are reset.
As a result, Clutter picking will skip and ignore those actors in
`clutter_actor_should_pick_paint()` because they aren't marked as
reactive anymore.
An example of such a client being affected by this issue is SCTK, the
Rust library implementing client side decorations for Wayland used
internally by winit and alacritty.
Move the `set_reactive()` call from `get_subsurface()` to the subsurface
`sync_actor_subsurface_state()` vfunc to make sure those remain reactive
even after `xdg_surface.get_toplevel` is invoked.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/1024https://gitlab.gnome.org/GNOME/mutter/merge_requests/1040
