Commit Graph

166 Commits

Author SHA1 Message Date
Neil Roberts
534e535a28 Use the Wayland embedded linked list implementation instead of BSD's
This removes cogl-queue.h and adds a copy of Wayland's embedded list
implementation. The advantage of the Wayland model is that it is much
simpler and so it is easier to follow. It also doesn't require
defining a typedef for every list type.

The downside is that there is only one list type which is a
doubly-linked list where the head has a pointer to both the beginning
and the end. The BSD implementation has many more combinations some of
which we were taking advantage of to reduce the size of critical
structs where we didn't need a pointer to the end of the list.

The corresponding changes to uses of cogl-queue.h are:

• COGL_STAILQ_* was used for onscreen the list of events and dirty
  notifications. This makes the size of the CoglContext grow by one
  pointer.

• COGL_TAILQ_* was used for fences.

• COGL_LIST_* for CoglClosures. In this case the list head now has an
  extra pointer which means CoglOnscreen will grow by the size of
  three pointers, but this doesn't seem like a particularly important
  struct to optimise for size anyway.

• COGL_LIST_* was used for the list of foreign GLES2 offscreens.

• COGL_TAILQ_* was used for the list of sub stacks in a
  CoglMemoryStack.

• COGL_LIST_* was used to track the list of layers that haven't had
  code generated yet while generating a fragment shader for a
  pipeline.

• COGL_LIST_* was used to track the pipeline hierarchy in CoglNode.

The last part is a bit more controversial because it increases the
size of CoglPipeline and CoglPipelineLayer by one pointer in order to
have the redundant tail pointer for the list head. Normally we try to
be very careful about the size of the CoglPipeline struct. Because
CoglPipeline is slice-allocated, this effectively ends up adding two
pointers to the size because GSlice rounds up to the size of two
pointers.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 13abf613b15f571ba1fcf6d2eb831ffc6fa31324)

Conflicts:
	cogl/cogl-context-private.h
	cogl/cogl-context.c
	cogl/driver/gl/cogl-pipeline-fragend-glsl.c
	doc/reference/cogl-2.0-experimental/Makefile.am
2013-06-13 13:45:47 +01:00
Neil Roberts
6d51a18e7c Add support for per-vertex point sizes
This adds a new function to enable per-vertex point size on a
pipeline. This can be set with
cogl_pipeline_set_per_vertex_point_size(). Once enabled the point size
can be set either by drawing with an attribute named
'cogl_point_size_in' or by writing to the 'cogl_point_size_out'
builtin from a snippet.

There is a feature flag which must be checked for before using
per-vertex point sizes. This will only be set on GL >= 2.0 or on GLES
2.0. GL will only let you set a per-vertex point size from GLSL by
writing to gl_PointSize. This is only available in GL2 and not in the
older GLSL extensions.

The per-vertex point size has its own pipeline state flag so that it
can be part of the state that affects vertex shader generation.

Having to enable the per vertex point size with a separate function is
a bit awkward. Ideally it would work like the color attribute where
you can just set it for every vertex in your primitive with
cogl_pipeline_set_color or set it per-vertex by just using the
attribute. This is harder to get working with the point size because
we need to generate a different vertex shader depending on what
attributes are bound. I think if we wanted to make this work
transparently we would still want to internally have a pipeline
property describing whether the shader was generated with per-vertex
support so that it would work with the shader cache correctly.
Potentially we could make the per-vertex property internal and
automatically make a weak pipeline whenever the attribute is bound.
However we would then also need to automatically detect when an
application is writing to cogl_point_size_out from a snippet.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 8495d9c1c15ce389885a9356d965eabd97758115)

Conflicts:
	cogl/cogl-context.c
	cogl/cogl-pipeline-private.h
	cogl/cogl-pipeline.c
	cogl/cogl-private.h
	cogl/driver/gl/cogl-pipeline-progend-fixed.c
	cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
2013-06-07 16:53:29 +01:00
Robert Bragg
8f9151303d pipeline: improve real_blend_enable checks
Since _cogl_pipeline_update_blend_enable() can sometimes show up quite
high in profiles; instead of calling
_cogl_pipeline_update_blend_enable() whenever we change pipeline state
that may affect blending we now just set a dirty flag and when we flush
a pipeline we check this dirty flag and lazily calculate whether blender
really needs to be enabled if it's set.

Since it turns out we were too optimistic in assuming most GL drivers
would recognize blending with ADD(src,0) is equivalent to disabling
GL_BLEND we now check this case ourselves so we can always explicitly
disable GL_BLEND if we know we don't need blending.

This introduces the idea of an 'unknown_color_alpha' boolean to the
pipeline flush code which is set whenever we can't guarantee that the
color attribute is opaque. For example this is set whenever a user
specifies a color attribute with 4 components when drawing a primitive.
This boolean needs to be cached along with every pipeline because
pipeline::real_blend_enabled depends on this and so we need to also call
_cogl_pipeline_update_blend_enable() if the status of this changes.

Incidentally with this patch we now no longer ever use
_cogl_pipeline_set_blend_enable() internally. For now the internal api
hasn't been removed though since we might want to consider re-purposing
it as a public api since it will now not conflict with our own internal
state tracking and could provide a more convenient way to disable
blending than setting a blend string.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-06-06 21:27:09 +01:00
Neil Roberts
d0944b8fbd Add a callback to get dirty events from a CoglOnscreen
This adds a callback that can be registered with
cogl_onscreen_add_dirty_callback which will get called whenever the
window system determines that the contents of the window is dirty and
needs to be redrawn. Under the two X-based winsys's, this is reported
off the back of the Expose events, under SDL it is reported from
SDL_VIDEOEXPOSE or SDL_WINDOWEVENT_EXPOSED and under Windows from the
WM_PAINT messages. The Wayland winsys doesn't really have the concept
of dirtying the buffer but in order to allow applications to work the
same way on all platforms it will emit the event when the surface is
first shown and whenever it is resized.

There is a private feature flag to specify whether dirty events are
supported. If the winsys does not set this then Cogl will simulate
dirty events by emitting one when the window is first allocated and
when it is resized. The only winsys's that don't set this flag are
things like KMS or the EGL null winsys where there is no windowing
system and showing and hiding the onscreen doesn't really make any
sense. In that case Cogl can assume the buffer will only become dirty
once when it is first allocated.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 85c5a9ba419b2247bd768284c79ee69164a0c098)

Conflicts:
	cogl/cogl-private.h
2013-05-30 13:42:56 +01:00
Daniel Stone
ea7d3b8476 Add fence API
cogl_framebuffer_add_fence creates a synchronisation fence, which will
invoke a user-specified callback when the GPU has finished executing all
commands provided to it up to that point in time.

Support is currently provided for GL 3.x's GL_ARB_sync extension, and
EGL's EGL_KHR_fence_sync (when used with OpenGL ES).

Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=691752

(cherry picked from commit e6d37470da9294adc1554c0a8c91aa2af560ed9f)
2013-05-28 21:36:03 +01:00
Robert Bragg
e3975d1711 Add api for queuing idle callback internally
This adds a _cogl_poll_renderer_add_idle api that can be used internally
for queuing an idle callback without needing to make any assumption
about the system mainloop that is being used. This is now used to avoid
having the _cogl_poll_renderer_dispatch() directly check for all kinds of
events to dispatch, and to avoid having the winsys dispatch vfuncs need
to directly know about CoglContext. This means we can now avoid having a
back reference from CoglRenderer to the CoglContext.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit a1e169f18f4257caec58760adccfe4ec09b9805d)
2013-04-30 16:39:31 +01:00
Robert Bragg
ed90c6fed9 Move event polling into CoglRenderer
This updates the cogl_poll_ apis to allow dispatching events before we
have a CoglContext and to also enables pollfd state to be changed in a
more add-hoc way by different Cogl components by replacing the
winsys->get_poll_info with _cogl_poll_renderer_add/remove_fd functions
and a winsys->get_dispatch_timeout vfunc.

One of the intentions here is that applications should be able to run
their mainloop before creating a CoglContext to potentially get events
relating to CoglOutputs.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 667e58c9cb2662aef5f44e580a9eda42dc8d0176)
2013-04-30 16:39:31 +01:00
Jasper St. Pierre
66c75f9a9d cogl-texture: Make the list of registered types global, not per-context
If we make this per-context and create two Cogl contexts, some types
won't re-register, and we'll be in a broken state where some types will
be considered not to be texture types.

https://bugzilla.gnome.org/show_bug.cgi?id=693696

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 567f049d20554bb8ea4e40fa5e72a9fd0bbd409e)
2013-02-13 18:47:16 +00:00
Jasper St. Pierre
a60f16116d cogl-context: Remove the unused buffer_types variable
https://bugzilla.gnome.org/show_bug.cgi?id=693696

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2013-02-13 18:46:51 +00:00
Owen W. Taylor
98e3b57d0d Add cogl_get_clock_time()
Add an API to get the current time in the time system that Cogl
is reporting timestamps. This is to be used to convert timestamps
into a different time system.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 9f3735a0c37adcfcffa485f81699b53a4cc0caf8)
2013-01-30 20:09:49 +00:00
Owen W. Taylor
24733abf68 onscreen: Add CoglFrameInfo and _add_frame_callback() api
Add a CoglFrameInfo object that tracks timing information for frames
that are drawn. We track a frame counter and frame timing information
for each CoglOnscreen. Internally a CoglFrameInfo is automatically
created for each frame, delimited by cogl_onscreen_swap_buffers() or
cogl_onscreen_swap_region() calls.

CoglFrameInfos are delivered to applications via frame event callbacks
that can be registered with a new cogl_onscreen_add_frame_callback()
api. Two initial event types (dispatched on all platforms) have been
defined; a _SYNC event used for throttling the frame rate of
applications and a _COMPLETE event used so signify the end of a frame.

Note: This new _add_frame_callback() api makes the
cogl_onscreen_add_swap_complete_callback() api redundant and so it
should be considered deprecated. Since the _add_swap_complete_callback()
api is still experimental api, we will be looking to quickly migrate
users to the new api so we can remove the old api.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 700401667db2522045e4623d78797b17f9184501)
2013-01-30 20:09:49 +00:00
Neil Roberts
9a242832dc Add some defines that are missing on GLES
The GLES2 driver wasn't compiling unless the GL driver is also enabled
because some run-time conditional code was directly using GL-only
defines.

This should also fix compiling using the stock GL headers on OS X
which don't define GL_NUM_EXTENSIONS.

https://bugzilla.gnome.org/show_bug.cgi?id=692420

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 661e1719aa0b95c409c568ec91ea52b8ff90519b)
2013-01-25 18:21:09 +00:00
Robert Bragg
36c85da3b8 Remove cogl-internal.h
This remove cogl-internal.h in favour of using cogl-private.h. Some
things in cogl-internal.h were moved to driver/gl/cogl-util-gl-private.h
and the _cogl_gl_error_to_string function whose prototype was moved from
cogl-internal.h to cogl-util-gl-private.h has had its implementation
moved from cogl.c to cogl-util-gl.c

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 01cc82ece091aa3bec4c07fdd6bc9e5135fca573)
2013-01-22 17:48:17 +00:00
Damien Lespiau
a0d47d5660 build: Hide cogl_pipeline_cache_{new,free}()
Those symbols should not be public and were exported as they started
with cogl_.

(cherry picked from commit 68a55f1dc70ea60fcccbe226029e585886feddc2)
2013-01-22 17:48:16 +00:00
Robert Bragg
cab4622eb3 matrix-stack: make CoglMatrixStack public
We have found several times now when writing code using Cogl that it
would really help if Cogl's matrix stack api was public as a utility
api. In Rig for example we want to avoid redundant arithmetic when
deriving the matrices of entities used to render and we aren't able
to simply use the framebuffer's matrix stack to achieve this. Also when
implementing cairo-cogl we found that it would be really useful if we
could have a matrix stack utility api.

(cherry picked from commit d17a01fd935d88fab96fe6cc0b906c84026c0067)
2013-01-22 17:48:11 +00:00
Robert Bragg
7fa04bb1a6 Adds back tex_coord array for CoglShader compatibility
This adds back compatibility for CoglShaders that reference the
cogl_tex_coord_in[] or cogl_tex_coord_out[] varyings. Unlike the
previous way this was done this patch maintains the use of layer numbers
for attributes and maintains forwards compatibility by letting shaders
alternatively access the per-layer tex_coord varyings via
cogl_tex_coord%i_in/out defines that index into the array.
2013-01-22 17:48:07 +00:00
Robert Bragg
6cfc93f26f clip-stack: workaround intel gen6 viewport clip bug
The Intel Mesa gen6 driver doesn't currently handle scissoring offset
viewports correctly, so this implements a workaround to intersect the
current viewport bounds with the scissor rectangle.

(cherry picked from commit afc5daab85e5faca99d6d6866658cb82c3954830)
2013-01-22 17:48:04 +00:00
Neil Roberts
2616ae0fa9 Add a GL 3 driver
This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When
requested, the GLX, EGL and SDL2 winsyss will set the necessary
attributes to request a forward-compatible core profile 3.1 context.
That means it will have no deprecated features.

To simplify the explosion of checks for specific combinations of
context->driver, many of these conditionals have now been replaced
with private feature flags that are checked instead. The GL and GLES
drivers now initialise these private feature flags depending on which
driver is used.

The fixed function backends now explicitly check whether the fixed
function private feature is available which means the GL3 driver will
fall back to always using the GLSL progend. Since Rob's latest patches
the GLSL progend no longer uses any fixed function API anyway so it
should just work.

The driver is currently lower priority than COGL_DRIVER_GL so it will
not be used unless it is specificly requested. We may want to change
this priority at some point because apparently Mesa can make some
memory savings if a core profile context is used.

In GL 3, getting the combined extensions string with glGetString is
deprecated so this patch changes it to use glGetStringi to build up an
array of extensions instead. _cogl_context_get_gl_extensions now
returns this array instead of trying to return a const string. The
caller is expected to free the array.

Some issues with this patch:

• GL 3 does not support GL_ALPHA format textures. We should probably
  make this a feature flag or something. Cogl uses this to render text
  which currently just throws a GL error and breaks so it's pretty
  important to do something about this before considering the GL3
  driver to be stable.

• GL 3 doesn't support client side vertex buffers. This probably
  doesn't matter because CoglBuffer won't normally use malloc'd
  buffers if VBOs are available, but it might but worth making
  malloc'd buffers a private feature and forcing it not to use them.

• GL 3 doesn't support the default vertex array object. This patch
  just makes it create and bind a single non-default vertex array
  object which gets used just like the normal default object. Ideally
  it would be good to use vertex array objects properly and attach
  them to a CoglPrimitive to cache the state.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
2013-01-22 17:48:01 +00:00
Robert Bragg
ae713a32d0 Adds a NOP driver
This adds a new "nop" driver that does nothing. This can be selected at
runtime either with the COGL_DRIVER=nop environment variable or by
passing COGL_DRIVER_NOP to cogl_renderer_set_driver()

Adding the nop driver gives us a way to test workloads without any
driver and hardware overheads which can help us understand how Cogl's
state tracking performs in isolation.

Having a nop driver can also serve as an shell/outline for creating
other drivers later.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 90587418233b6438290741d80aedf193ae660cad)
2013-01-22 17:47:59 +00:00
Robert Bragg
df21e20f65 Adds CoglError api
Although we use GLib internally in Cogl we would rather not leak GLib
api through Cogl's own api, except through explicitly namespaced
cogl_glib_ / cogl_gtype_ feature apis.

One of the benefits we see to not leaking GLib through Cogl's public API
is that documentation for Cogl won't need to first introduce the Glib
API to newcomers, thus hopefully lowering the barrier to learning Cogl.

This patch provides a Cogl specific typedef for reporting runtime errors
which by no coincidence matches the typedef for GError exactly.  If Cogl
is built with --enable-glib (default) then developers can even safely
assume that a CoglError is a GError under the hood.

This patch also enforces a consistent policy for when NULL is passed as
an error argument and an error is thrown. In this case we log the error
and abort the application, instead of silently ignoring it. In common
cases where nothing has been implemented to handle a particular error
and/or where applications are just printing the error and aborting
themselves then this saves some typing. This also seems more consistent
with language based exceptions which usually cause a program to abort if
they are not explicitly caught (which passing a non-NULL error signifies
in this case)

Since this policy for NULL error pointers is stricter than the standard
GError convention, there is a clear note in the documentation to warn
developers that are used to using the GError api.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46)

Note: Since we can't change the Cogl 1.x api the patch was changed to
not rename _error_quark() functions to be _error_domain() functions and
although it's a bit ugly, instead of providing our own CoglError type
that's compatible with GError we simply #define CoglError to GError
unless Cogl is built with glib disabled.

Note: this patch does technically introduce an API break since it drops
the cogl_error_get_type() symbol generated by glib-mkenum (Since the
CoglError enum was replaced by a CoglSystemError enum) but for now we
are assuming that this will not affect anyone currently using the Cogl
API. If this does turn out to be a problem in practice then we would be
able to fix this my manually copying an implementation of
cogl_error_get_type() generated by glib-mkenum into a compatibility
source file and we could also define the original COGL_ERROR_ enums for
compatibility too.

Note: another minor concern with cherry-picking this patch to the 1.14
branch is that an api scanner would be lead to believe that some APIs
have changed, and for example the gobject-introspection parser which
understands the semantics of GError will not understand the semantics of
CoglError. We expect most people that have tried to use
gobject-introspection with Cogl already understand though that it is not
well suited to generating bindings of the Cogl api anyway and we aren't
aware or anyone depending on such bindings for apis involving GErrors.
(GnomeShell only makes very-very minimal use of Cogl via the gjs
bindings for the cogl_rectangle and cogl_color apis.)

The main reason we have cherry-picked this patch to the 1.14 branch
even given the above concerns is that without it it would become very
awkward for us to cherry-pick other beneficial patches from master.
2013-01-22 17:47:39 +00:00
Robert Bragg
ce5d06afe1 framebuffer: split GL code out from cogl-framebuffer.c
This splits out most of the OpenGL specific code from cogl-framebuffer.c
into cogl-framebuffer-gl.c and extends the CoglDriverVtable interface
for cogl-framebuffer.c to use.

There are hopes to support several different backends for Cogl
eventually to hopefully get us closer to the metal so this makes some
progress in organizing which parts of Cogl are OpenGL specific so these
parts can potentially be switched out later.

The only remaining use of OpenGL still in cogl-framebuffer.c is to
handle cogl_framebuffer_read_pixels.
2013-01-18 10:53:29 +00:00
Robert Bragg
2942fd362d Avoid referencing file scope context in _context_new()
cogl_context_new() had a mixture of references to the file scope context
variable (_context) and the local (context) variable. This renames the
file scope variable to _cogl_context to catch unnecessary references to
the old name and fixes the code accordingly to reference the local
variable instead.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 33a9397ee1ae1729200be2e5084cf43cebb64289)
2012-09-17 23:06:20 +01:00
Neil Roberts
74fd618df9 Add conf vars to trick Cogl to think extensions are disabled
This adds two new configuration environment variables:

COGL_DISABLE_GL_EXTENSIONS and
COGL_OVERRIDE_GL_VERSION

The variables can also be set in the cogl.conf file using the same
names.

The first one is a list of GL extension names separated by commas.
When set Cogl will assume any extension listed here is not available
by removing it from the string returned from
glGetString(GL_EXTENSIONS). If the string is set in both the config
file and the environment variable then the union of the two lists will
be used.

The second overrides the value returned from glGetString(GL_VERSION).
If the string is set in both places the version from the environment
variable will take priority.

These are sometimes useful for debugging Cogl to test the various
combinations of extensions. It could also be useful to work around
driver bugs where an extension is badly supported and it would be
better not to use it.

The variables in cogl-config that just set a global char * variable
have been put together in an array instead of having a separate blob
of code for each one in order to make it simpler to add new variables.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit ec69c2dc576c78664e0b73879365cb7414ecf441)
2012-08-06 18:51:33 +01:00
Robert Bragg
010d16f647 Adds initial GLES2 integration support
This makes it possible to integrate existing GLES2 code with
applications using Cogl as the rendering api.

Currently all GLES2 usage is handled with separate GLES2 contexts to
ensure that GLES2 api usage doesn't interfere with Cogl's own use of
OpenGL[ES]. The api has been designed though so we can provide tighter
integration later.

The api would allow us to support GLES2 virtualized on top of an
OpenGL/GLX driver as well as GLES2 virtualized on the core rendering api
of Cogl itself. Virtualizing the GLES2 support on Cogl will allow us to
take advantage of Cogl debugging facilities as well as let us optimize
the cost of allocating multiple GLES2 contexts and switching between
them which can both be very expensive with many drivers.

As as a side effect of this patch Cogl can also now be used as a
portable window system binding API for GLES2 as an alternative to EGL.

Parts of this patch are based on work done by Tomeu Vizoso
<tomeu.vizoso@collabora.com> who did the first iteration of adding GLES2
API support to Cogl so that WebGL support could be added to
webkit-clutter.

This patch adds a very minimal cogl-gles2-context example that shows how
to create a gles2 context, clear the screen to a random color and also
draw a triangle with the cogl api.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 4bb6eff3dbd50d8fef7d6bdbed55c5aaa70036a8)
2012-08-06 14:27:42 +01:00
Robert Bragg
a945890de6 Workaround drisw bug where clipped redraws don't work
This detects when we are running on any of Mesa's software rasterizer
backends and disables use of glBlitFramebuffer and glXCopySubBuffer.
Both of these currently result in full-screen copies so there's little
point in using these to optimize how much of the screen we present.

To help ensure we re-evaluate this workaround periodically we have added
a comment marker of "ONGOING BUG" above the workaround and added a note
to our RELEASING document that says we should grep for this marker and
write a NEWS section about ongoing bug workarounds.

https://bugzilla.gnome.org/show_bug.cgi?id=674208

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 11f2f6ebb42398978ec8dd92b3c332ae8140a728)
2012-08-06 14:27:42 +01:00
Robert Bragg
e3d6bc36d3 Re-design the matrix stack using a graph of ops
This re-designs the matrix stack so we now keep track of each separate
operation such as rotating, scaling, translating and multiplying as
immutable, ref-counted nodes in a graph.

Being a "graph" here means that different transformations composed of
a sequence of linked operation nodes may share nodes.

The first node in a matrix-stack is always a LOAD_IDENTITY operation.

As an example consider if an application where to draw three rectangles
A, B and C something like this:

cogl_framebuffer_scale (fb, 2, 2, 2);
cogl_framebuffer_push_matrix(fb);

  cogl_framebuffer_translate (fb, 10, 0, 0);

  cogl_framebuffer_push_matrix(fb);

    cogl_framebuffer_rotate (fb, 45, 0, 0, 1);
    cogl_framebuffer_draw_rectangle (...); /* A */

  cogl_framebuffer_pop_matrix(fb);

  cogl_framebuffer_draw_rectangle (...); /* B */

cogl_framebuffer_pop_matrix(fb);

cogl_framebuffer_push_matrix(fb);
  cogl_framebuffer_set_modelview_matrix (fb, &mv);
  cogl_framebuffer_draw_rectangle (...); /* C */
cogl_framebuffer_pop_matrix(fb);

That would result in a graph of nodes like this:

LOAD_IDENTITY
      |
    SCALE
    /     \
SAVE       LOAD
  |           |
TRANSLATE    RECTANGLE(C)
  |     \
SAVE    RECTANGLE(B)
  |
ROTATE
  |
RECTANGLE(A)

Each push adds a SAVE operation which serves as a marker to rewind too
when a corresponding pop is issued and also each SAVE node may also
store a cached matrix representing the composition of all its ancestor
nodes. This means if we repeatedly need to resolve a real CoglMatrix
for a given node then we don't need to repeat the composition.

Some advantages of this design are:
- A single pointer to any node in the graph can now represent a
  complete, immutable transformation that can be logged for example
  into a journal. Previously we were storing a full CoglMatrix in
  each journal entry which is 16 floats for the matrix itself as well
  as space for flags and another 16 floats for possibly storing a
  cache of the inverse. This means that we significantly reduce
  the size of the journal when drawing lots of primitives and we also
  avoid copying over 128 bytes per entry.
- It becomes much cheaper to check for equality. In cases where some
  (unlikely) false negatives are allowed simply comparing the pointers
  of two matrix stack graph entries is enough. Previously we would use
  memcmp() to compare matrices.
- It becomes easier to do comparisons of transformations. By looking
  for the common ancestry between nodes we can determine the operations
  that differentiate the transforms and use those to gain a high level
  understanding of the differences. For example we use this in the
  journal to be able to efficiently determine when two rectangle
  transforms only differ by some translation so that we can perform
  software clipping.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-08-06 14:27:40 +01:00
Robert Bragg
54735dec84 Switch use of primitive glib types to c99 equivalents
The coding style has for a long time said to avoid using redundant glib
data types such as gint or gchar etc because we feel that they make the
code look unnecessarily foreign to developers coming from outside of the
Gnome developer community.

Note: When we tried to find the historical rationale for the types we
just found that they were apparently only added for consistent syntax
highlighting which didn't seem that compelling.

Up until now we have been continuing to use some of the platform
specific type such as gint{8,16,32,64} and gsize but this patch switches
us over to using the standard c99 equivalents instead so we can further
ensure that our code looks familiar to the widest range of C developers
who might potentially contribute to Cogl.

So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this
switches all Cogl code to instead use the int{8,16,32,64}_t and
uint{8,16,32,64}_t c99 types instead.

Instead of gsize we now use size_t

For now we are not going to use the c99 _Bool type and instead we have
introduced a new CoglBool type to use instead of gboolean.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
2012-08-06 14:27:39 +01:00
Robert Bragg
09642a83b5 Removes all remaining use of CoglHandle
Removing CoglHandle has been an on going goal for quite a long time now
and finally this patch removes the last remaining uses of the CoglHandle
type and the cogl_handle_ apis.

Since the big remaining users of CoglHandle were the cogl_program_ and
cogl_shader_ apis which have replaced with the CoglSnippets api this
patch removes both of these apis.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0)

  Since the original patch was done after removing deprecated API
  this back ported patch doesn't affect deprecated API and so
  actually this cherry-pick doesn't remove all remaining use of
  CoglHandle as it did for the master branch of Cogl.
2012-08-06 14:27:39 +01:00
Robert Bragg
cc4c578887 fix cogl_context_new crash if fail to connect renderer
If a NULL display is passed to cogl_context_new() then it has to
implicitly create a CoglRenderer and CoglDisplay and propagate any
resulting errors back to the user. Previously the implementation relied
on passing a NULL renderer to cogl_display_new() as the means for
implicitly connecting to a renderer. The problem with this though is
that cogl_display_new() isn't designed to ever return NULL but if it
failed to connect to a renderer automatically it would do and then
cogl_context_new would pass NULL to cogl_display_setup() leading to a
crash.

This patch changes the implementation of cogl_context_new() to now
explicitly create a CoglRenderer and connect to it if a NULL display is
given. This way we can easily propagate any errors. In addition
cogl_display_new has been changed to abort if it fails to implicitly
connect to a renderer due to a NULL renderer argument.

An application needing to gracefully handle problems connecting to a
renderer at runtime should manually instantiate and connect a renderer
passing a GError argument to cogl_renderer_connect.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-04-11 12:26:52 +01:00
Neil Roberts
2037e0f4f1 Add a mechanism for determining GPU driver details
This adds a CoglGpuInfo struct to the CoglContext which contains some
enums describing the GL driver in use. This currently includes the
driver package (ie, is it Mesa) the version number of the package and
the vendor of the GPU (ie, is it by Intel). There is also a bitmask
which will contain the workarounds that we should do for that
particular driver configuration. The struct is initialised on context
creation by using a series of string comparisons on the strings
returned from glGetString.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-05 13:52:43 +01:00
Neil Roberts
c33ce5fc6b Use GL_ARB_sampler_objects
GL_ARB_sampler_objects provides a GL object which overrides the
sampler state part of a texture object with different values. The
sampler state that Cogl currently exposes is the wrap modes and
filters. Cogl exposes the state as part of the pipeline layer state
but without this extension GL only exposes it as part of the texture
object state. This means that it won't work to use a single texture
multiple times in one primitive with different sampler states. It also
makes switching between different sampler states with a single texture
not terribly efficient because it has to change the texture object
state every time.

This patch adds a cache for sampler states in a shared hash table
attached to the CoglContext. The entire set of parameters for the
sampler state is used as the key for the hash table. When a unique
state is encountered the sampler cache will create a new entry,
otherwise it will return a const pointer to an existing entry. That
means we can have a single pointer to represent any combination of
sampler state.

Pipeline layers now just store this single pointer rather than storing
all of the sampler state. The two separate state flags for wrap modes
and filters have now been combined into one. It should be faster to
compare the sampler state now because instead of comparing each value
it can just compare the pointers to the cached sampler entries. The
hash table of cached sampler states should only need to perform its
more expensive hash on the state when a property is changed on a
pipeline, not every time it is flushed.

When the sampler objects extension is available each cached sampler
state will also get a sampler object to represent it. The common code
to flush the GL state will now simply bind this object to a unit
instead of flushing the state though the CoglTexture when possible.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-05 13:47:36 +01:00
Neil Roberts
6197e3abf3 Add constructors which take a CoglBitmap to all primitive textures
This adds public constructors which take a CoglBitmap to all primitive
texture types. This constructor should be considered the canonical
constructor for initializing the texture with data because it should
be possible to wrap any type of data in a CoglBitmap. Having at least
this single constructor avoids the need to have an explosion of
constructors such as new_from_data, new_from_pixel_buffer and
new_from_file etc.

The already available internal bitmap constructor for CoglTexture2D
has had its flags parameter removed under the assumption that flags do
not make sense for primitive textures. The meta constructor
cogl_texture_new_from_bitmap now just explicitly calls set_auto_mipmap
after constructing the texture depending on the value of the
COGL_TEXTURE_NO_AUTO_MIPMAP flag.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-05 13:47:32 +01:00
Neil Roberts
e7df2dbf79 bitmap: Store a pointer to the context
This adds a context member to CoglBitmap which stores the context it
was created with. That way it can be used in texture constructors
which use a bitmap. There is also an internal private function to get
the context out of the bitmap which all of the texture constructors
now use. _cogl_texture_3d_new_from_bitmap has had its context
parameter removed so that it more closely matches the other bitmap
constructors.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 14:24:01 +01:00
Neil Roberts
60812e6a0e Add a vtable for the driver
Cogl already had a vtable for the texture driver. This ended up being
used for some things that are not strictly related to texturing such
as converting between pixel formats and GL enums. Some other functions
that are driver dependent such as updating the features were not
indirected through a vtable but instead switched directly by looking
at the ctx->driver enum value. This patch normalises to the two uses
by adding a separate vtable for driver functions not related to
texturing and moves the pixel format conversion functions to it from
the texture driver vtable. It also adds a context parameter to all of
the functions in the new driver vtable so that they won't have to rely
on the global context.
2012-03-23 13:51:08 +00:00
Neil Roberts
d18b59d9e6 Add a public cogl_bitmap_new_for_data
This creates a CoglBitmap which points into an existing buffer in
system memory. That way it can be used to create a texture or to read
pixel data into. The function replaces the existing internal function
_cogl_bitmap_new_from_data but removes the destroy notify call back.
If the application wants notification of destruction it can just use
the cogl_object_set_user_data function as normal. Internally there is
now a convenience function to create a bitmap for system memory and
automatically free the buffer using that mechanism.

The name of the function is inspired by
cairo_image_surface_create_for_data which has similar semantics.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-03-14 12:19:56 +00:00
Neil Roberts
b8df3561f4 Remove the point size cache on the context
I don't think there's really any point in this cache because the
pipeline code completely owns the point size state. Pipelines are
already compared for whether their point size state is different
before setting it so it shouldn't result in any extra calls to
glPointSize apart from maybe when the first pipeline is initially
flushed.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-03-07 15:13:29 +00:00
Robert Bragg
785e6375eb Adds a context arg to cogl_pipeline_new()
As we move towards Cogl 2.0 we are aiming to remove the need for a
default global CoglContext and so everything should be explicitly
related to a context somehow. CoglPipelines are top level objects and
so this patch adds a context argument to cogl_pipeline_new().

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-21 12:38:24 +00:00
Robert Bragg
47868e1f3e texture-3d: remove _EXP defines + CoglHandle and pass context
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the cogl-texture-3d
api symbols.

This patch also replaces use of CoglHandle with a CoglTexture3D type
instead.

Finally this patch also ensures the CoglTexture3D constructors take an
explicit CoglContext pointer but not a CoglTextureFlags argument,
consistent with other CoglTexture constructors.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-21 12:37:44 +00:00
Robert Bragg
680f63a48c Remove all internal includes of cogl.h
The cogl.h header is meant to be the public header for including the 1.x
api used by Clutter so we should stop using that as a convenient way to
include all likely prototypes and typedefs. Actually we already do a
good job of listing the specific headers we depend on in each of the .c
files we have so mostly this patch just strip out the redundant
includes for cogl.h with a few fixups where that broke the build.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-20 23:12:45 +00:00
Robert Bragg
ee940a3d0d Move all types/prototypes from cogl.h -> cogl[1]-context.h
So we can get to the point where cogl.h is merely an aggregation of
header includes for the 1.x api this moves all the function prototypes
and type definitions into a cogl-context.h and a new cogl1-context.h.

Ideally no code internally should ever need to include cogl.h as it just
represents the public facing header for accessing the 1.x api which
should only be used by Clutter.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-20 23:12:44 +00:00
Neil Roberts
b96e6900f5 cogl-pipeline-layer: Use CoglTextureType instead of GL target enum
Instead of storing the GLenum for the target of the last used texture
for a layer it now stores the CoglTextureType instead. The state name
has been renamed to 'texture type' instead of 'texture target'.
Previously the default pipeline layer would store 0 here to represent
that there is no texture. This has been changed to store
COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers
always have a valid value for the texture type. Any places that were
previously fetching the texture from a layer to determine the target
(for example when generating shaders or when enabling a particular
texture target) now use the texture type instead. This means they will
work even for layers that don't have a texture.

This also changes it so that when binding a fallback texture instead
of always using a 2D texture it will now use the default texture
corresponding to the texture type of the layer. That way when the
generated shader tries to do a texture lookup for that type of texture
it will get a valid texture object. To make this work the patch adds a
default texture for 3D textures to the context and also makes the
default rectangle texture actually be a rectangle texture instead of
using a 2D texture.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-13 17:09:34 +00:00
Neil Roberts
f005f517fe Flush matrices in the progend and flip with a vector
Previously flushing the matrices was performed as part of the
framebuffer state. When on GLES2 this matrix flushing is actually
diverted so that it only keeps a reference to the intended matrix
stack. This is necessary because on GLES2 there are no builtin
uniforms so it can't actually flush the matrices until the program for
the pipeline is generated. When the matrices are flushed it would
store the age of modifications on the matrix stack so that it could
detect when the matrix hasn't changed and avoid flushing it.

This patch changes it so that the pipeline is responsible for flushing
the matrices even when we are using the GL builtins. The same
mechanism for detecting unmodified matrix stacks is used in all
cases. There is a new CoglMatrixStackCache type which is used to store
a reference to the intended matrix stack along with its last flushed
age. There are now two of these attached to the CoglContext to track
the flushed state for the global matrix builtins and also two for each
glsl progend program state to track the flushed state for a
program. The framebuffer matrix flush now just updates the intended
matrix stacks without actually trying to flush.

When a vertex snippet is attached to the pipeline, the GLSL vertend
will now avoid using the projection matrix to flip the rendering. This
is necessary because any vertex snippet may cause the projection
matrix not to be used. Instead the flip is done as a forced final step
by multiplying cogl_position_out by a vec4 uniform. This uniform is
updated as part of the progend pre_paint depending on whether the
framebuffer is offscreen or not.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-12-06 19:02:06 +00:00
Robert Bragg
7283e0a49c rework enabling of attributes, removing _cogl_enable()
This removes the limited caching of enabled attributes done by
_cogl_enable() and replaces it with a more generalized set of bitmasks
associated with the context that allow us to efficiently compare the set
of attribute locations that are currently enabled vs the new locations
that need enabling so we only have to inform OpenGL of the changes in
which locations are enabled/disabled.

This also adds a per-context hash table for mapping attribute names to
global name-state structs which includes a unique name-index for any
name as well as pre-validated information about builtin "cogl_"
attribute names including whether the attribute is normalized and what
texture unit a texture attribute corresponds too.

The name-state hash table means that cogl_attribute_new() now only needs
to validate names the first time they are seen.

CoglAttributes now reference a name-state structure instead of just the
attribute name, so now we can efficiently get the name-index for any
attribute and we can use that to index into a per-glsl-program cache
that maps name indices to real GL attribute locations so when we get
asked to draw a set of attributes we can very quickly determine what GL
attributes need to be setup and enabled. If we don't have a cached
location though we can still quickly access the string name so we can
query OpenGL.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-12-06 18:51:57 +00:00
Robert Bragg
042dc7c8cd framebuffer: Optimize _cogl_framebuffer_flush_state()
Previously the cost of _cogl_framebuffer_state_flush() would always
scale by the total amount of state tracked by CoglFramebuffer even in
cases where we knew up-front that we only wanted to flush a subset of
the state or in cases where we requested to flush the same framebuffer
multiple times with no changes being made to the framebuffer.

We now track a set of state changed flags with each framebuffer and
track the current read/draw buffers as part of the CoglContext so that
we can quickly bail out when asked to flush the same framebuffer
multiple times with no changes.

_cogl_framebuffer_flush_state() now takes a mask of the state that we
want to flush and the implementation has been redesigned so that the
cost of checking what needs to be flushed and flushing those changes
now scales by how much state we actually plan to update.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-12-06 18:51:57 +00:00
Neil Roberts
c269817edd cogl-pipeline: Use a hash table for faster uniform name lookup
The uniform names are now stored in a GPtrArray instead of a linked
list. There is also a hash table to speed up converting names to
locations.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-16 16:32:11 +00:00
Neil Roberts
4553ca0695 cogl-pipeline: Add support for setting uniform values
This adds the following new public experimental functions to set
uniform values on a CoglPipeline:

void
cogl_pipeline_set_uniform_1f (CoglPipeline *pipeline,
                              int uniform_location,
                              float value);
void
cogl_pipeline_set_uniform_1i (CoglPipeline *pipeline,
                              int uniform_location,
                              int value);
void
cogl_pipeline_set_uniform_float (CoglPipeline *pipeline,
                                 int uniform_location,
                                 int n_components,
                                 int count,
                                 const float *value);
void
cogl_pipeline_set_uniform_int (CoglPipeline *pipeline,
                               int uniform_location,
                               int n_components,
                               int count,
                               const int *value);
void
cogl_pipeline_set_uniform_matrix (CoglPipeline *pipeline,
                                  int uniform_location,
                                  int dimensions,
                                  int count,
                                  gboolean transpose,
                                  const float *value);

These are similar to the old functions used to set uniforms on a
CoglProgram. To get a value to pass in as the uniform_location there
is also:

int
cogl_pipeline_get_uniform_location (CoglPipeline *pipeline,
                                    const char *uniform_name);

Conceptually the uniform locations are tied to the pipeline so that
whenever setting a value for a new pipeline the application is
expected to call this function. However in practice the uniform
locations are global to the CoglContext. The names are stored in a
linked list where the position in the list is the uniform location.

The global indices are used so that each pipeline can store a mask of
which uniforms it overrides. That way it is quicker to detect which
uniforms are different from the last pipeline that used the same
CoglProgramState so it can avoid flushing uniforms that haven't
changed. Currently the values are not actually compared which means
that it will only avoid flushing a uniform if there is a common
ancestor that sets the value (or if the same pipeline is being flushed
again - in which case the pipeline and its common ancestor are the
same thing).

The uniform values are stored in the big state of the pipeline as a
sparse linked list. A bitmask stores which values have been overridden
and only overridden values are stored in the linked list.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-16 16:32:11 +00:00
Neil Roberts
39ca3e51df Don't take a reference to the last used onscreen framebuffer
Cogl keeps a pointer to the last used onscreen framebuffer from the
context to implement the deprecated cogl_set_draw_buffer function
which can take COGL_WINDOW_BUFFER as the target to use the last
onscreen buffer. Previously this would also take a reference to that
pointer. However that was causing a circular reference between the
framebuffer and the context which makes it impossible to clean up
resources properly when onscreen buffers are used. This patch instead
changes it to just store the pointer and then clear the pointer during
_cogl_onscreen_free as a kind of cheap weak reference.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-14 18:40:28 +00:00
Neil Roberts
1566941c2f cogl-context: Destroy texture units later on
This patch moves the call to _cogl_destroy_texture_units() from
_cogl_context_free() to later on. When destroying a GL texture the
texture units are checked. This would end up accessing invalid memory
so we need to try to destroy the texture units only after everything
that might be referencing a texture has been destroyed.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-04 13:03:01 +00:00
Robert Bragg
b72f255c0a Start to reduce dependence on glib
Since we've had several developers from admirable projects say they
would like to use Cogl but would really prefer not to pull in
gobject,gmodule and glib as extra dependencies we are investigating if
we can get to the point where glib is only an optional dependency.
Actually we feel like we only make minimal use of glib anyway, so it may
well be quite straightforward to achieve this.

This adds a --disable-glib configure option that can be used to disable
features that depend on glib.

Actually --disable-glib doesn't strictly disable glib at this point
because it's more helpful if cogl continues to build as we make
incremental progress towards this.

The first use of glib that this patch tackles is the use of
g_return_val_if_fail and g_return_if_fail which have been replaced with
equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros.

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-11-01 12:03:02 +00:00
Robert Bragg
79719347c8 framebuffer: split out CoglOnscreen code
This factors out the CoglOnscreen code from cogl-framebuffer.c so we now
have cogl-onscreen.c, cogl-onscreen.h and cogl-onscreen-private.h.
Notably some of the functions pulled out are currently namespaced as
cogl_framebuffer but we know we are planning on renaming them to be in
the cogl_onscreen namespace; such as cogl_framebuffer_swap_buffers().

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-11-01 12:03:02 +00:00