Preparation for potentially calling meta_wayland_transaction_apply some
time after surface commit, in which case doing it in the former would be
too late: The client may legally destroy the attached wl_buffer
immediately after commit, in which case meta_wayland_buffer_attach would
spuriously fail and disconnect the client (or possibly even crash mutter
due to NULL error).
Requires splitting up the surface texture between protocol and output
state, and propagating from the former to the latter via
MetaWaylandSurfaceState.
v2: (Jonas Ådahl)
* Move meta_wayland_surface_get_texture call to separate line.
* Use g_autoptr for GError.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1880>
And keep track of the hierarchy separately for the Wayland protocol and
for output. Protocol state is updated immediately as protocol requests
are processed, output state only when the corresponding transaction is
applied (which may be deferred until the next commit of the parent
surface).
v2:
* Directly add placement ops to a transaction, instead of going via
pending_state.
* Use transaction entry for the sub-surface instead of that for its
parent surface.
v3:
* Use transaction entry for the parent surface again, to ensure proper
ordering of placement ops, and call
meta_wayland_surface_notify_subsurface_state_changed only once per
parent surface.
* Drop all use of wl_resource_add_destroy_listener, transactions are
keeping surfaces alive as long as needed.
v4:
* Rebase on https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2501
* Drop ClutterActor code from meta_wayland_surface_apply_placement_ops.
(Robert Mader)
v5:
* Rename MetaWaylandSubSurfaceState to MetaWaylandSurfaceSubState, since
the next commit adds not sub-surface specific state to it.
v6:
* Move include of meta-wayland-subsurface.h from
meta-wayland-transaction.c to .h, since the latter references
MetaWaylandSubsurfacePlacementOp.
v7:
* Drop superfluous !entry check from meta_wayland_transaction_apply.
v8:
* Rename output/protocol fields to output/protocol_state. (Jonas Ådahl)
v9:
* Use meta_wayland_surface_state_new in
meta_wayland_transaction_add_placement_op.
v10:
* Fix a few style issues per check-style.py.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1880>
Destroy Wayland protocol related state immediately when the Wayland
resource is destroyed, but keep the rest alive by any transaction which
references the surface.
This makes it easier and cleaner to deal with a surface getting
destroyed while it's still referenced by transactions.
v2:
* No more need to keep references for surfaces in the entries hash
table.
v3:
* Do not use surface->sub.transaction in wl_surface_destructor, just
destroy it.
v4:
* No need for wl_surface_destructor to use its own transaction.
v5:
* Use g_steal_pointer & (more) g_clear_pointer in wl_surface_destructor.
v6:
* Leave SURFACE_DESTROY signal emission in wl_surface_destructor.
v7:
* Use finalize instead of dispose callback.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1880>
Instead of cached_state.
surface_commit for a synchronized sub-surface either commits the
transaction or merges it into the parent surface's transaction (if
the parent is a synchronized sub-surface itself).
This should fix or at least improve the behaviour of nested synchronized
sub-surfaces.
Also change wl_subsurface_set_desync:
* Commit sub-surface transactions separately. This may allow some of
them to be applied earlier in some cases.
* Commit transaction only for descendant sub-surfaces which become
newly de-synchronized themselves.
v2:
* Drop unused function prototypes
v3:
* Use g_clear_pointer for surface->sub.transaction.
v4:
* Use g_steal_pointer instead of g_clear_pointer. (Sebastian Wick, Jonas
Ådahl)
v5: (Carlos Garnacho)
* Add spaces between type casts and values.
* Use (gpointer *) instead of (void**).
v6: (Jonas Ådahl)
* Use g_clear_object in meta_wayland_transaction_entry_merge_into.
* Use meta_wayland_transaction_entry_free in
meta_wayland_transaction_merge_into.
* Fix alignment of meta_wayland_transaction_merge_pending_state
parameters.
* Remove unused meta_wayland_transaction_add_state declaration.
v7:
* Use meta_wayland_surface_state_new in
meta_wayland_transaction_merge_pending_state.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1880>
A transaction contains the committed state for a surface, plus any
cached state for synchronized subsurfaces.
v2:
* Handle sub-surface positions separately from surface states.
v3:
* Sync child states only for surfaces with state in the transaction.
v4: (Jonas Ådahl)
* Drop unnecessary g_object_new call from wl_subsurface_set_desync. (me)
* Fix indentation & formatting in meta_wayland_surface_commit.
* Add meta_wayland_surface_state_new helper function.
* Fix alignment of meta_wayland_transaction_apply_subsurface_position
parameters.
* Add curly braces around meta_wayland_transaction_sync_child_states
call in meta_wayland_transaction_apply.
v5:
* Make meta_wayland_surface_state_new an inline function.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1880>
v2:
* Use single hash table with struct which will contain all kinds of
state handled by a transaction.
v3:
* Add meta_wayland_transaction_destroy.
v4 (Georges Basile Stavracas Neto)
* Fix struct _MetaWaylandTransaction(Entry) formatting.
* Explicitly test against NULL.
* Use gpointer insteadof void * for
meta_wayland_transaction_entry_destroy.
v5: (Robert Mader)
* Use for loop in is_ancestor.
* Include meta-wayland-transaction.h first in
meta-wayland-transaction.c.
v6:
* Use g_autofree & g_clear_object.
v7: (Jonas Ådahl)
* Rename meta_wayland_transaction_entry_destroy to
meta_wayland_transaction_entry_free.
* Drop g_autofree use from meta_wayland_transaction_entry_free again.
* Make meta_wayland_transaction_entry_free take a
MetaWaylandTransactionEntry pointer.
* Rename meta_wayland_transaction_destroy to
meta_wayland_transaction_free.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1880>
Need to deal with surface->resource == NULL and
surface->pending_state == NULL in some places.
v2:
* Avoid expanding conditions to multiple lines.
(Georges Basile Stavracas Neto)
v3:
* Use a single bailout condition in meta_wayland_client_owns_window as
well.
v4:
* Remove spare empty line in meta_wayland_surface_apply_state.
(Robert Mader)
* Add wl_resource_post_error calls in xdg-shell request handlers.
(Robert Mader)
* Drop checks in functions which can only be called if there's a valid
resource.
* Drop more checks which are unnecessary due to leaving the
SURFACE_DESTROY signal emission in wl_surface_destructor later.
v5:
* Move resource = surface->resource assignments to if (!resource) tests.
(Jonas Ådahl)
v6:
* Fix style issue per check-style.py.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1880>
First make sure we call 'move_resize()' in all cases where the size or
position can change, then move the updating of the buffer rect to the
same place as we update the frame rect. This means keeping track of
surface size changes, in addition to geometry changes, and calling
finish_move_resize() whenever any of those changes, in addition to
acknowledged configurations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2338>
The "single pixel buffer" Wayland protocol extension provides a way for
clients to create 1x1 buffers with a single color, specified by
providing the color channels (red, green and blue) as well as the
alpha channel as a 32 bit unsigned integer.
For now, this is turned into a 1x1 texture. Future potential
improvements is to hook things up to the scanout candidate logic and
turn it into a scanout capable DMA buffer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2246>
As testing of direct scanout revealed, `META_MONITOR_TRANSFORM`
does actually match `WL_OUTPUT_TRANSFORM` enums. The fact that
things rendered correctly with 90/270 degree values swapped
was because other parts of the stack got the interpretation
wrong, most notably `meta_rectangle_transform()`.
Thus lets revert this change and fix the stack accordingly.
This reverts commit 8d9bbe109b.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2459>
Our internal interpretation of output transforms is not in line with
the Wayland spec. Wayland describes them as the transform that a
compositor will apply to a surface to compensate for the rotation
or mirroring of an output device - counter-clockwise.
Mutter in turn interprets it the other way around. One could
argue it does the same but clock-wise - or it interprets the transform
from the viewpoint of the content, not the device.
In either way, the difference is that 90 and 270 degree values are
switched. Thus swap these accordingly when we translate from
`WL_OUTPUT_TRANSFORM` to `META_MONITOR_TRANSFORM`.
See: https://gitlab.freedesktop.org/wayland/weston/issues/99
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1055>
It's not allowed to call eglQueryWaylandBuffer() if the call to
eglBindWaylandDisplay() failed, and will result in an assert being hit
in mesa if called.
Avoid that by keeping track whether we succeeded to bind, and only
attempt to realize a legacy EGL wl_buffer if binding succeeded.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2415>
Before scanning out the surface of a native client we have
to check the following attributes that influence the
relationship between buffer and the defined result on screen:
- buffer scale
- buffer transform
- viewport
In the future we can loose these checks again in cases where the
display hardware supports the required operations (scaling, cropping
and rotating).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2276>
This aims to replace the x,y arguments in wl_surface.attach(); meaning
it can be used more sanely together with EGL, and at all when using
Vulkan.
The most common use case for the offset is setting the hotspot of DND
surfaces.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1905>
It is possible that we never create a cached state for a surface
even if it is synced. That is the case if `commit()` is never called.
We still need to call `apply_state()` in this case in order to run
e.g. `role_post_apply_state()` or `parent_state_applied` on subsurfaces.
So just ensure to initialize the cached state instead of bailing out.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2232>
We're in the destructor, it's pointless to unset the userdata as we'll
never ever see a request being invoked with it ever again, since the
resource itself will be destroyed or marked as destroyed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2202>
Most clients nowadays switched to buffer damage, most notably Mesa
and Xwayland. Thus lets avoid the extra cost of allocating three
`cairo_region_t`s and doing some calculations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2168>
If no viewport is set, the neutral viewport is the surface size
without viewport destination size applied - i.e. transform and
scale applied to the buffer size. Change it accordingly, giving
us the same values we'd return in `get_width` in this case.
As result, this only changes cases where a viewport destination
size but no viewport source rectangle is set.
The change fixes exactly such cases, e.g. the Gstreamer Wayland
sink. Can be tested with: `gst-play-1.0 --videosink=waylandsink`.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2168>
Unlike other subsurface state, placement operations need to get
applied in order. As per spec:
```
Requests are handled in order and applied immediately to a pending
state. The final pending state is copied to the active state the
next time the state of the parent surface is applied.
```
Having placement operations being part of the subsurface state
makes it difficult to support arbitrary orderings. Make them
part of the parents surface pending state instead.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1691
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1768>
The presentation-time protocol allows surfaces to get accurate
timestamps of when their contents were shown on screen.
This commit implements a stub version of the protocol which correctly
discards all presentation feedback objects (as if the surface contents
are never shown on screen). Subsequent commits will implement sending
the presented events to surfaces shown on screen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
There's no need to update the outputs recursively in case the actor gets
mapped or unmapped. That's because mapping happens recursively itself,
so if a window with multiple subsurfaces is shown, all subsurfaces will
receive a "notify::mapped" signal.
Since this was the only remaining user of
meta_wayland_surface_update_outputs_recursively(), we can now remove
that function.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
Since we now listen to the "stage-views-on-changed" signal (which
"catches" all the changes we want) on MetaWaylandActorSurfaces for
updating the wl_outputs the surface is on, we no longer need to call
meta_wayland_surface_update_outputs_recursively() on all geometry
changes, so remove that signal handler.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
Since we're now connecting to one more signal of MetaWaylandOutput, keep
signal connections in one place and move connecting the
"output-destroyed" signal to surface_entered_output() and disconnecting
it to surface_left_output().
This also allows us to use the "outputs_to_destroy_notify_id" as a
simple set and rename it to "outputs".
While at it, also use g_hash_table_destroy() instead of
g_hash_table_unref() since destroy is more clear than unref and does the
same thing in this case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1230
When hotplugging a new monitor, we recreate all the MetaWaylandOutputs
and need to emit leave events to the surfaces for the old wl_outputs and
enter events for the newly created ones.
There's a race condition though: We might update the monitors a surface
is on (and thus emit enter/leave events for the wl_outputs) before the
Wayland client is registered with the new wl_output (ie. the
bind_output() callback of MetaWaylandOutput was called), which means we
don't send an enter event to the client in surface_entered_output().
Since MetaWaylandSurface now has the MetaWaylandOutput in its outputs
hashtable, it thinks the client has been notified and won't send any
more enter events.
To fix that, make MetaWaylandOutput emit a new signal "output-bound"
when a client bound to the output and make all surfaces which are on
that output listen to the signal. In the signal handler compare the
newly added client to the client the surface belongs to, and if it's the
same one, send an enter event to that client.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1230
