When we move focus elsewhere when unmanaging a window, we *need* to move
the focus, so if the target is globally active, move the focus to the
no-focus-window in anticipation that the focus will normally get moved
to the right window when the target window responds to WM_TAKE_FOCUS.
If the window doesn't respond to WM_TAKE_FOCUS, then focus will be left
on the no-focus-window, but there's no way to distinguish whether the
app will respond or not.
https://bugzilla.gnome.org/show_bug.cgi?id=711618
When a client spontaneously focuses their window, perhaps in response
to WM_TAKE_FOCUS we'll get a FocusOut/FocusIn pair with same serial.
Updating display->focus_serial in response to FocusOut then was causing
us to ignore FocusIn and think that the focus was not on any window.
We need to distinguish this spontaneous case from the case where we
set the focus ourselves - when we set the focus ourselves, we're careful
to combine the SetFocus with a property change so that we know definitively
what focus events we have already accounted for.
https://bugzilla.gnome.org/show_bug.cgi?id=720558
Initial placement during meta_window_constrain() can result in changes
to the borders, so we need to recompute our border sizes after
constraining. This fixes incorrect window borders on
initially maximized windows.
https://bugzilla.gnome.org/show_bug.cgi?id=720417
Currently the only way to move a window to another monitor via
keyboard is to start a move operation and move it manually using
arrow keys. We do have all the bits of a dedicated keybinding in
place already, so offer it as a more comfortable alternative.
https://bugzilla.gnome.org/show_bug.cgi?id=671054
Some drivers which support RandR 1.4 may not support setting
or getting the primary output, therefore mutter should trap
and ignore any relevant errors.
The modesetting driver exposes this problem when used in
combination with the nvidia binary driver using RandR 1.4
offloading.
Also use a local display variable instead of calling
meta_get_display () every time.
Do this by duplicating the current code and porting it to use
X again. A better approach would involve our own event structures,
and I really don't want to do that right now. We can clean this up
later.
The grab_window might be NULL, in which case we have a full-screen
grab, but we might still in a grab. Correct the check by asking
whether we're in a grab op or not.
When unmaximizing, we changed bits of window state, then called out
to code that used the frame extents *before* we cleared old cached
extents. Clear the cache up-front as soon as we change the window
state.
https://bugzilla.gnome.org/show_bug.cgi?id=714707
When _GTK_FRAME_EXTENTS changes, we need to redo constraints on
the window - this matters in particular if the toolkit removes
invisible borders when a window is maximized, since otherwise
the maximized window will be positioned as if it still has
invisible borders.
https://bugzilla.gnome.org/show_bug.cgi?id=714707
We require a MetaWindow to properly implement some of the requests
for xdg_surface, so add a way to have an unmapped MetaWindow that
we can store properties on, that we later map when the client
attaches a buffer...
The compiler is not quite smart enough to figure out that the condition
for setting the "compositor" variable matches a later condition for
accessing it, so express this in a way the compiler will understand.
For clarity, rename meta_window_get_outer_rect() to match terminology
we use elsewhere. The old function is left as a deprecated
compatibility wrapper.
Instead of passing around MetaFrameBorders, compute it when we need it.
This also allows us to know that we are using MetaFrameBorders only for windows
with frames (where it is meaningful) and not for frameless windows, which
can have custom borders which we need to interpret differently.
https://bugzilla.gnome.org/show_bug.cgi?id=707194
Cache the computed border size so we can fetch the border size at
any time without worrying that we'll be spending too much time in
the theme code (in some cases we might allocate a PangoFontDescription
or do other significant work.)
The main effort here is clearing the cache when various bits of window
state change that could potentially affect the computed borders.
https://bugzilla.gnome.org/show_bug.cgi?id=707194
There are extensive places in the code where we convert between the client
rectangle and the frame rectangle. Instead of manually doing it use
new helper functions on MetaWindow and the existing meta_window_get_outer_rect().
This fixes a number of bugs where the computation was being done incorrectly,
most of these bugs are with the recently added custom frame extents, but
some relate to invisible borders or even simply to confusion between the
window and frame rectangle.
Switch the placement code to place the frame rectangle rather
than the client window - this simplifies things considerably.
https://bugzilla.gnome.org/show_bug.cgi?id=707194
What we want to achieve is that the dialog is visually centered
on the parent, including the decorations for both, and making sure
that CSD/frame_extents are respected.
https://bugzilla.gnome.org/show_bug.cgi?id=707194
Use the "hotplug_mode_update" connector property indicating that the
screen settings should be updated: get a new preferred mode on hotplug
events to handle dynamic guest resizing (where you resize the host
window and the guest resizes with it).
https://bugzilla.gnome.org/show_bug.cgi?id=711216
Clients like on-screen keyboards try not to take focus when the user clicks
on their window by setting the Input hint to false. However, due to GTK+ and
GDK bugs, the public API for setting the Input hint to false don't remove
WM_TAKE_FOCUS from WM_PROTOCOLS, unintentionally putting them into Globally
Active mode.
These clients also expect that since they don't want to take focus, they want
the focus to remain on the existing window. In this case, for clients like
on-screen keyboards, it's so they can send synthesized keyboard events to the
focused window.
https://bugzilla.gnome.org/show_bug.cgi?id=710296
Since this is stored in an array full of data that will be copied
around, we can't rely on pointer addresses for every item in a stack
not changing.
I don't see any reason that we even have a weak pointer, either.
This code looks safe to me without it.
Rather than have MetaWaylandSeat do all the state management itself,
put the split between the root cursor and the window cursor in the
cursor tracker itself. We'll expand this to add a "grab" cursor in
the next commit, allowing us to force a cursor on grab operations.
There is now a meta_display_handle_event alongside the
meta_display_handle_xevent function which handles events in terms of
Clutter events instead of X events. A Clutter event filter is
registered so that all Clutter events will pass through this function.
The pointer event handling code from the X event version has been moved
into this new function and has been modified to use the details from
the Clutter event instead of the X event. This is a step towards
moving all of the event handling code over to use Clutter events.
Based-heavily-on-a-patch-by: Neil Roberts <neil@linux.intel.com>
This helps with git's diff code by moving all the giant indentation
changes, letting us know what's going on better when we move to
Clutter for event handling.
The plan is to make a new version of meta_display_handle_event that
will accept Clutter events instead of X events and then gradually move
over the events to the new function and finally remove the X version.
When X clients change the keyboard map, the also update a property
on the root window. We can notice that and rebuild our data structures
with the new values, as well as inform the wayland clients.
This is a terrible hack, and it's not how we want to implement things
in 3.12, but it's enough to have the same keyboard layout in the
shell, in X clients and in wayland clients in 3.10, until we decide
on the fate of the keyboard g-s-d plugin.
https://bugzilla.gnome.org/show_bug.cgi?id=707446
Expose min-backlight-step so that gnome-settings-daemon can
support backlights with less than 10 steps without mutter
normalizing the brightness back to its original value
https://bugzilla.gnome.org/show_bug.cgi?id=710380
When creating MetaCursorReference using a wl_resource, use the provided
hotspot coordinates.
This makes clients such as clickdot work more correctly.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=709593
The part of code dealing with move/resize grab in display.c is only
responsible of this behavior when triggered with a modifier. So it
shouldn't stop the move/resize behavior triggered from a mouse event
without modifier on the title bar or sides of the window.
https://bugzilla.gnome.org/show_bug.cgi?id=704759
Rather than do the cursor -> name translation ourselves in two different
places, use the facilities in libXcursor to do it for us. Put the shared
piece of code in meta-cursor-tracker, and use it for both server-side and
client-side cursor loading.
The destroy notify for a DBus watch holds a reference to the IdleMonitor,
but the IdleMonitorWatch object doesn't (it knows all watches will
be destroyed before the monitor is, so it doesn't need one). This
means that the DBus watch reference can be the only one keeping
the IdleMonitor alive (expecially true for device idle monitors,
which are only used by g-s-d/cursor), and that means that calling
the destroy notify freezes the monitor (and the next X calls
access garbage).
https://bugzilla.gnome.org/show_bug.cgi?id=708420
If you maximize a CSD window on a monitor without struts, it ends
up taking the whole monitor size, but it doesn't mean that the
application wants to fullscreen.
https://bugzilla.gnome.org/show_bug.cgi?id=708718
Need two passes, because the order we traverse the array is
alphabetical on connector name, not left to right, so we might
see a monitor on the right before we get the offset from disabling
the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=707473
No, holes in the framebuffer are not a good a thing: windows can
get lost there, and the user can get very confused.
Instead, compact the monitors that where previously after.
https://bugzilla.gnome.org/show_bug.cgi?id=707473
The XSync semantics mandate that alarms already expired will not
fire until the counter is reset and the alarm triggered again, so
clients traditionally called get_idle_time() first to see if they
should install the alarm.
This is inherently racy, as by the time the call is handled by
mutter and the reply received the idle time could be different.
Instead, if we see that the watch would have fired in the past,
fire it immediately.
This is a behavior change, but it's a compatible one, as all legacy
clients are calling get_idle_time() first, and it was perfectly
possible for the idle time counter to trigger the alarm right
after the get_idle_time() call.
https://bugzilla.gnome.org/show_bug.cgi?id=707302
To properly resize clients, we need to send them configure events
with the size we computed from the constraint system, and
then check if the new size they ask is compatible with
our expectation.
Note that this does not handle interactive resizing yet, it
merely makes the API calls work for wayland clients.
https://bugzilla.gnome.org/show_bug.cgi?id=707401
Make sure that meta_display_list_windows() returns wayland windows
too, by keeping a separate hash for wayland clients.
This fixes a crash in the alt-tab code of gnome-shell.
Reviewed by drago01 in IRC.
We don't have actual pointer barriers implemented, so this is a
quick workaround to trigger the fallback paths in the shell, for
the hot corner and the message tray.
To be reverted after 3.10
Not only this way we get the right Adwaita cursor as the default
(instead of shipping our own in png format), but we also add
support for all MetaCursors as root cursor (which most important
should allow us to have I-beams in shell entries)
https://bugzilla.gnome.org/show_bug.cgi?id=707573
Using the new Cogl API to actually modeset (because we can't
use the DRM API directly without controlling buffer swap), we
can finally have a KMS monitor backend, which means full display
configuration when running on bare metal.
https://bugzilla.gnome.org/show_bug.cgi?id=706308
At logout, we want to die when gnome-session tells us. Previously,
we were relying on the X server going down (killed by GDM at the
end of the session), but we can't use that in wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=706421
Warnings that are going to the journal should be not translated:
they're not user visible, and translating them would just make
bug reporting harder (as now the developers need to understand
what the warning is saying)
https://bugzilla.gnome.org/show_bug.cgi?id=707897
Switching meta/util.h to gi18n.h was wrong, mutter is a library
and needs gi18n-lib.h, but that cannot be included from a public
header (since it depends on config.h or command line options),
so split util.h into a public and a private part.
https://bugzilla.gnome.org/show_bug.cgi?id=707897
Move the option from the mutter binary to libmutter, and
rename from --nested to --wayland.
This allows gnome-shell to drop the set_is_wayland_compositor()
call.
https://bugzilla.gnome.org/show_bug.cgi?id=707897
clutter_stage_show_cursor()/hide_cursor() only works in the X11
backend (where someone else is in charge of showing the cursor),
and even then, it has confusing effects when running nested wayland,
so an abstraction layer is needed.
https://bugzilla.gnome.org/show_bug.cgi?id=707474
We don't get notifications from X11 when the mode is reset, so
our cached value can get stale. To work around that, always forward
requests to the backend (and let it deal with ignoring the change
if wanted)
https://bugzilla.gnome.org/show_bug.cgi?id=707649
Add a new interface, gtk_shell, than can be used by gtk to
retrieve a surface extension called gtk_surface, which will be
used to communicate with mutter all the GTK extensions to EWMH
https://bugzilla.gnome.org/show_bug.cgi?id=707128
Add support for GTK application menus
To do so, we need to be able to set surface state before creating
the MetaWindow, so we introduce MetaWaylandSurfaceInitialState as
a staging area.
The gtk-shell-surface implementation would either write to the
initial state, or directly to the window.
At the same, implement set_title and set_class too, because it's
easy enough.
https://bugzilla.gnome.org/show_bug.cgi?id=707128
If, checking the event timestamps, we see that a new configuration
was explicitly requested by an another XRandR client, don't proceed to
apply the intended configuration again, even if looking at the
EDIDs it appears that the outputs changed.
This works around some buggy Xorg drivers (qxl, vbox) that generate
a new serial number everytime the user resizes the host window.
https://bugzilla.gnome.org/show_bug.cgi?id=706735
device_id_max is set to the device_id in ensure_device_monitor(), but we
will loop only to (device_id_max - 1) when propagating the sync XEvent
down, missing the device correspondng to device_id_max.
https://bugzilla.gnome.org/show_bug.cgi?id=707250
Once mutter is started from weston-launch on its own VT, there is
no way to change VT again (for example to actually start an application),
because the keyboard is put in raw mode.
So introduce some keybindings mimicking the standard X ones (Ctrl+Alt+Fn)
that switch the VT manually when activated.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
Now that we have a setuid launcher binary, we can make use of
using a private protocol through the socket we're passed at startup.
We also use the new hook in clutter-evdev to ask mutter-launch for
the FDs of the input devices we need, and we emulate the old X
DRM lock with a nested GMainContext without sources.
In the future, mutter-launch will be replaced with the new logind
API currently in development.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
The user active watch is a one-fire watch, but it is valid in the API
for the callback to explicitly remove the watch itself. In that case,
the watch will be invalid after the user removes it, and the memory
potentially freed. So make sure to not dereference the watch after
the callback is called.
https://bugzilla.gnome.org/show_bug.cgi?id=706825
Dialogs that don't have a parent should not be skip-taskbar,
otherwise they get lost and there is no way to recover them
(because they're not autoraised when activating the parent),
but toolkits and applications set the hint anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=673399
If we're attempting to reconfigure the CRTCs to the same parameter,
skip the X call, as in some drivers a modeset can take time and
cause flicker.
https://bugzilla.gnome.org/show_bug.cgi?id=706672
To allow other clients (gnome-session, gnome-settings-daemon)
to monitor user activity, introduce a DBus interface for the
idle monitor inside mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=706005
When running as a wayland compositor, we can't use the xserver's
IDLETIME, because that's updated only in response to X events.
But we have all the events ourselves, so we can just run the timer
in process.
https://bugzilla.gnome.org/show_bug.cgi?id=706005
We can't use the X11 stage window, if clutter is not using the X11
backend (and even if it was, it would be bogus when the xwayland
server is not the one clutter is talking to). Instead, we introduce
the concept of "focus type", which we use to differentiate the
various meanings of None in the focus_xwindow field.
https://bugzilla.gnome.org/show_bug.cgi?id=706364
Using out-of-band notifications from the wayland protocol or from
X is racy, in that the client could ask for the new resources before
we have them.
Instead, with a signal, we are sure that when the client asks for
it, it will get the right values.
https://bugzilla.gnome.org/show_bug.cgi?id=706382
Under X, we need to use XFixes to watch the cursor changing, while
on wayland, we're in charge of setting and painting the cursor.
MetaCursorTracker provides the abstraction layer for gnome-shell,
which can thus drop ShellXFixesCursor. In the future, it may grow
the ability to watch for pointer position too, especially if
CursorEvents are added to the next version of XInput2, and thus
it would also replace the PointerWatcher we use for gnome-shell's
magnifier.
https://bugzilla.gnome.org/show_bug.cgi?id=705911
The value passed to XRRCrtcSetGamma must be allocated with
XRRAllocGamma (because it relies on the locations of green and blue),
otherwise garbage is sent on the wire.
https://bugzilla.gnome.org/show_bug.cgi?id=706231
