Trying to track the fullscreen status outside of Mutter, as GNOME Shell
was doing previously, was very prone to errors, because Mutter has a
very tricky definition of when a window is set to be fullscreen and
*actually* acting like a fullscreen window.
* Add meta_screen_get_monitor_in_fullscreen() and an
::in-fullscreen-changed signal. This allows an application to
track when there are fullscreen windows on a monitor.
* Do the computation of fullscreen status in a "later" function that
runs after showing, so we properly take focus into account.
* To get ordering of different phases right, add more values
to MetaLaterType.
* Add auto-minimization, similar to what was added to GNOME Shell
earlier in this cycle - if a window is set to be fullscreen, but
not actually fullscreen, minimize.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
Since the tile mode is now always reset on maximize(), this code
no longer does anything (not to mention that side-by-side tiled
windows haven't snapped back for a while now).
https://bugzilla.gnome.org/show_bug.cgi?id=682779
We used to restore side-by-side tiling when unmaximizing, so we
kept the tile-mode during maximization. Since commit 10d53fc7d
there's no longer a good reason to do so, and it can result in
tile previews being shown erroneously on window drag operations
without motion (double-click on titlebar), so reset the tile
mode in maximize().
https://bugzilla.gnome.org/show_bug.cgi?id=682779
The tile preview is expected to be shown underneath the focus window.
However the code that restacks the preview broke when override-redirect
windows were moved to a separate window group.
To fix, special-case tile previews to put them in the NORMAL layer.
https://bugzilla.gnome.org/show_bug.cgi?id=696053
Previously, we were handling failure to respond to _NET_WM_SYNC_REQUEST
in the code path for throttling motion events. But this meant that
if a window didn't respond to _NET_WM_SYNC_REQUEST and there were no
motion events - for a keyboard resize, or after the end of the grab
operation - it would end up in a stuck state.
Use a separate per-window timeout to reliably catch the failure to respond
to _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
During resizing we froze window updates when configuring the
window, and unfroze the window updates when processing the
next resize. This wasn't absolutely reliable, because we might
not have a next resize. Instead tie window freezing more
directly to the current sync request value - a window is
frozen until it catches up with the last value we sent it
in _NET_WM_SYNC_REQUEST.
Testing with unresponsive clients showed that there was a bug
where window->disable_sync once set, would not actually disable
sync, but it *would* disable noticing that the client was
unresponsive for the next resize. Fix that by checking for
->disable_sync before sending _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
Send a _NET_WM_FRAME_DRAWN for each newly created window, as required
by the specification. This avoids a race where a window might be created
frozen but already unfrozen by the time we first see fetch the
counter value.
Remove a duplicate call to meta_compositor_set_updates_frozen() which
was called before the MetaWindowActor is created and hence did nothing.
https://bugzilla.gnome.org/show_bug.cgi?id=694771
meta_window_is_remote compares a cached copy of the system hostname
with the hostname of the client window
(as presented by the WM_CLIENT_MACHINE property).
Of course, the system hostname can change at any time, so caching
it is wrong. Also, the WM_CLIENT_MACHINE property won't necessarily
change when the system hostname changes, so comparing it with the
new system hostname is wrong, too.
This commit makes the code call gethostname() at the time
WM_CLIENT_MACHINE is set, check whether it's remote then, and cache
that value, rather than comparing potentially out of sync hostnames
later.
https://bugzilla.gnome.org/show_bug.cgi?id=688716
We do, in fact, need freezing to affect window geometry, so that
move-resize operations (such as an interactive resize from the
left, or a resize of a popup centered by the application) occur
atomically.
So to make map effects work properly, only exclude the initial
placement of a window from freezing. (In the future, we may want
to consider whether pure moves of a window being done in response
to a user drag should also be excluded from freezing.)
Rename meta_window_sync_actor_position() to
meta_window_sync_actor_geometry() for clarity.
https://bugzilla.gnome.org/show_bug.cgi?id=693922
The WM spec requires _NET_WM_FRAME_DRAWN to *always* be sent when
there is an appropriate update to the sync counter value. We were
potentially missing _NET_WM_FRAME_DRAWN when an application did a
spontaneous update during an interactive resize and during effects.
Refactor the code to always send _NET_WM_FRAME_DRAWN, even when
a window is frozen.
https://bugzilla.gnome.org/show_bug.cgi?id=693833
During resizing, An odd counter value (indicating the beginning of a frame)
shouldn't cause us to redraw and start a new frame, only an even counter
value. This was causing the frozen state for the window frame counter to
overlap the frozen state for the resize, causing the window not to be
updated.
https://bugzilla.gnome.org/show_bug.cgi?id=693833
In different places we checked the grab op differently when determing
whether we are using _NET_WM_SYNC_REQUEST. This was somewhat covered
up previously by the fact that we only had a sync alarm when using
_NET_WM_SYNC_REQUEST, but that is no longer the case, so consistently
use meta_grab_op_is_resizing() everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
When a client is drawing as hard as possible (without sleeping
between frames) we need to draw as soon possible, since sleeping
will decrease the effective frame rate shown to the user, and
can also result in the system never kicking out of power-saving
mode because it doesn't look fully utilized.
Use the amount the client increments the counter value by when
ending the frame to distinguish these cases:
- Increment by 1: a no-delay frame
- Increment by more than 1: a non-urgent frame, handle normally
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Resizing the frame triggers creation of a new backing pixmap for the
window, so we should do that first before we resize the client window
and mess up the contents of the old backing pixmap.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
When the application provides the extended second counter for
_NET_WM_SYNC_REQUEST, send a client message with completion
information after the next redraw after each counter update
by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
If an application provides two values in _NET_WM_SYNC_REQUEST_COUNTER,
use that as a signal that the applications wants an extended behavior
where it can update the counter as well as the window manager. If the
application updates the counter to an odd value, updates of the
window are frozen until the counter is updated again to an even value.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Instead of creating a new alarm each time we resize a window
interactively, create an alarm the first time we resize a window
and keep it around permanently until we unmanage the window.
Doing it this way will be useful when we allow the application to
spontaneously generate sync request updates to indicate
frames it is drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Replace the unused meta_compositor_set_updates() with
a reversed-meaning meta_compositor_set_updates_frozen(), and use
it to implement freezing application window updates during
interactive resizing. This avoids drawing new areas of the window
with blank content before the application has a chance to repaint.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Some windows may already have event masks on them that we've selected
for, especially if we're using GTK+ windows. In particular, this fixes
window menus in the XI2 port.
https://bugzilla.gnome.org/show_bug.cgi?id=690581
This new hint allows compositors to know what portions of a window
will be obscured, as a region above them is opaque. For an RGB window,
possible to glean this information from the bounding shape region of
a client window, but not for an ARGB32 window. This new hint allows
clients that use ARGB32 windows to say which part of the window is
opaque, allowing this sort of optimization.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
Using a public method for setting the (cached) icon geometry rather
than accessing the struct members directly allows setting the icon
geometry from extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=692997
We have some code in gnome-shell that does the equivalent of:
window.get_workspace() == workspace || window.is_on_all_workspaces();
which is a bit unwieldy. We already have a method in mutter,
so use that and document it.
https://bugzilla.gnome.org/show_bug.cgi?id=691744
Currently, we ping windows only when attempting to delete them, but
if the application is not responding, we want to show the dialog
as soon as possible. Given that we cannot be passively notified that
the window stopped responding with the current X11 protocol, a good
workaround is to ping the window when activating it.
If the window stops responding while active, it is expected the user
will try to switch window or open the overview, and when coming back
he'll get the failure dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684340
We want to maintain the invariant that an attached modal dialog is always
of type MODAL_DIALOG, so recompute is_attached_dialog() when the window
type changes.
https://bugzilla.gnome.org/show_bug.cgi?id=690454
In random places that are not grabs, we selected for events on
things like the root window, stage window, COW and more. Switch
these over to using the proper XI2 APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
As calling XIGrabDevice multiple times will change it, just
drop the XChangeActivePointerGrab path and just go down the
XIGrabPointer path always.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
Mechanically transform the event processing of mutter to care
about XI2 events instead of Core Events. Core Events will be left
in the dust soon, and removed entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
This removes some duplicate event type checks, and will make
the code cleaner in the future when we want to make the grab_op_event
handler take an XIDeviceEvent directly.
Based on a patch by Owen Taylor <otaylor@fishsoup.net>
https://bugzilla.gnome.org/show_bug.cgi?id=688779
Since we want nice alt-tab applications for gnome-shell, we should up the
limit to 96. In the future, we probably want to get rid of the icon-cache,
and allow looking up a correctly sized icon directly from the window.
To prevent app breakage, set the legacy WM_HINTS pixmap size directly to
32x32.
https://bugzilla.gnome.org/show_bug.cgi?id=689651
When using the show-desktop shortcut with no desktop window, unshowing
will focus the second-most-recently-used window. If we find a desktop
window, it will be focused explicitly and everything works as expected;
however without a desktop window, we end up hiding the focus window,
which will use focus_default_window() with the not_this_one parameter
to move focus away. We used to get away with this, as the not_this_one
parameter was ignored until commit e257580b94, now with bug 675982
fixed, we need to explicitly handle the show-desktop case.
https://bugzilla.gnome.org/show_bug.cgi?id=686928
If someone plugs in a new monitor, while all their regular windows
should move in absolute X coordinates to ensure they stay on the
same monitor, the desktop window should stay put.
https://bugzilla.gnome.org/show_bug.cgi?id=681159
When we consider tiling a special case of maximization, it makes
more sense to always unmaximize to the normal state rather than
restoring a previous tile state.
https://bugzilla.gnome.org/show_bug.cgi?id=677565
Currently we decide whether a modal dialog should be attached or not
when mapping it, i.e. we don't pick up preference changes that happen
while the dialog is up. It's not really a big deal given that modal
dialogs are usually transitory, but it's easy enough to add a bit of
extra polish ...
https://bugzilla.gnome.org/show_bug.cgi?id=679904
Side-by-side tiling is conceptually very close to maximization
("half-maximized"), so it makes sense to also hide the titlebar
in this state if requested by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=679290
Similar to meta_screen_get_primary_monitor, this returns a monitor index.
The monitor that the pointer is on. The previous private implementation
has been renamed to meta_screen_get_current_monitor_info.
https://bugzilla.gnome.org/show_bug.cgi?id=642591
It is impossible to switch to other windows when keep-on-top is set
for maximized windows; given that keep-on-top is only ever useful
to keep a window visible while focusing a different window, the
current behavior is pointless. So ignore keep-on-top while a window
is maximized.
https://bugzilla.gnome.org/show_bug.cgi?id=673581
Starting the auto-maximize process on a window like a
META_WINDOW_DESKTOP window that is not maximizable gets placement into
a confused state and eventually results in the window being positioned
at the wrong position (the position that an auto-maximized window would
be restored to.)
https://bugzilla.gnome.org/show_bug.cgi?id=673566
"warning: 'match_tile_mode' may be used uninitialized in this function", it
complains. It thinks it's not unused because of other values of
window->tile_mode, but other complex logic ensures that it can't be
META_TILE_MAXIMIZED, so this is a safe commit.
Windows that have minimum widths larger than the screen can't be maximized,
even though we put them in a maximized state and allow users to do so:
the window just won't change size and position. Fix this by simply not giving
the option to maximize, like what happens for non-resizable windows.
https://bugzilla.gnome.org/show_bug.cgi?id=643606
A lot of code did something similar to:
MetaFrameBorders borders;
if (window->frame)
meta_frame_calc_borders (window->frame, &borders);
else
meta_frame_borders_clear (&borders);
Sometimes, the else part was omitted and we were unknowingly using
uninitalized values for OR windows. Clean this up by just testing
for a NULL frame in meta_frame_calc_borders and clearing for the
caller if so.
https://bugzilla.gnome.org/show_bug.cgi?id=643606
Since we're going to be evaluating the work area at startup now, we need
to make sure that we don't iterate over workspaces before they're assigned.
The easiest way to do this is to make sure that meta_window_get_workspaces
doesn't crash.
https://bugzilla.gnome.org/show_bug.cgi?id=643606
Returns the matching tiled window. This is the topmost tiled window in a
complementary tile mode that is:
- on the same monitor;
- on the same workspace;
- spanning the remaining monitor width;
- there is no 3rd window stacked between both tiled windows that's
partially visible in the common edge.
https://bugzilla.gnome.org/show_bug.cgi?id=643075
Windows that start up in a size that is almost as big as the workarea create
extra work for the user (resizing or maximizing) so save the user's time by
detecting such windows and automaximize them.
https://bugzilla.gnome.org/show_bug.cgi?id=671677
Basically we don't really want to create windows that are almost maximized in
size but not actually maximized. This creates work for the user and makes it
very difficult to use and resize manually.
So set the newly unmaximized window size to the previously used size or 80% of the
size of the current workarea (attempting to retain natural aspect ratio if
possible), whichever is smaller.
https://bugzilla.gnome.org/show_bug.cgi?id=671677
After _unmanage the object is semantically dead even if technically it's not,
so remove the prefs listener here to prevent it being called for a dead
object.
In particular this fixes a crash when starting up gnome-shell with at least
one gimp utility window opened which causes mutter to create a MetaWindow for
it only to immediately get an UnmapNotify afterwards which causes mutter to
unmanage the MetaWindow. Afterwards prefs_changed_callback is called for this
dead MetaWindow and tries to dereference the window->monitor pointer which is
already NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=671087
For maximized windows, titlebars cannot be used to reposition or
scale the window, so if an application does not use it to convey
useful information (other than the application name), the screen
space occupied by titlebars could be put to better use.
To account for this use case, a setting for requesting that windows'
titlebars should be hidden during maximization has been added to
GTK+, add support for this in the window manager.
https://bugzilla.gnome.org/show_bug.cgi?id=665617
The current code requires windows to be resizable to be considered
for tiling, which excludes all maximized/tiled windows. While this
restriction concurs with the desired behavior for edge-tiling, it
feels overly restrictive for keybindings.
As the edge-tiling code in update_move() already ensures the above
restriction, it seems save to remove it from the can_tile_maximized()
function, assuming that windows that are not meant to be tiled or
maximized won't provide a maximize function.
https://bugzilla.gnome.org/show_bug.cgi?id=648700
Usually tiling involves a size change and the frame is redrawn
automatically, however this is not the case when switching directly
between left- and right-tiled.
Ensure that a redraw happens in that case as well.
https://bugzilla.gnome.org/show_bug.cgi?id=648700
Move preferences to GSettings, using mainly shared schemas from
gsettings-desktop-schemas.
Unlike GConf, GSettings support is not optional, as Gio is already
a hard dependency of GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=635378
meta_window_move_resize_frame operates much like
meta_window_move_resize, but ensures the window
and its frame (if present) will fit within the
specified dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=651899
If we are moving in snap mode (shift pressed) we don't want to tile. We must
also cancel any pending tiling if snap mode is activated during the move drag.
https://bugzilla.gnome.org/show_bug.cgi?id=662270
meta_window_get_current_tile_area() computes the area where the tiled window
should be based on the current pointer position but that's only meaningful
when the user is actually dragging the window.
When running the tiling constrain the pointer might be on other monitor and at
that point the window jumps to this other monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=642580
Since the frame window size that meta_window_move_resize() uses depends
on whether the window has horizontal/vertical resize functionality, we
need to update this flag before we resize the window.
https://bugzilla.gnome.org/show_bug.cgi?id=659854
If a window had a type hint intended for override-redirect windows
like NOTIFICATION, we ended up with a window that was decorated but
with a frame type of FRAME_TYPE_LAST, causing assertion failures.
Fix this by making recalc_window_features() just call
meta_window_get_frame_type().
https://bugzilla.gnome.org/show_bug.cgi?id=599988
_NET_FRAME_EXTENTS should contain the difference between where a window asked
to be placed, and where it is. Ideally, this should be the same as the visible
extents.
https://bugzilla.gnome.org/show_bug.cgi?id=659848
A window can specify geometry that it is placed at. We need to exclude invisible
borders when calculating where to place the window, otherwise the window will have
a strange offset.
https://bugzilla.gnome.org/show_bug.cgi?id=659848
If XRANDR is availible, we track the first (or primary) output per
crtc (== xinerama monitor) so when the monitors change we can try
to find the same output and move windows there. If we can't find the
original monitor in the new set (or XRANDR is not supported) we move
the window to the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=645408
Different bits of code were using slightly different checks to test
whether a window was an attached dialog. Add a new
meta_window_is_attached_dialog(), and use that everywhere.
Also, freeze the is-attached status when the window is first shown,
rather than recomputing it each time the caller asks, since this could
cause problems if a window changes its type after it has already been
attached, etc. However, if an attached window's parent is destroyed,
or an attached window changes its transient-for, then fix things up by
destroying the old MetaWindow and creating a new one (causing
compositor unmap and map events to be fired off, allowing the display
of the window to be fixed up).
Remove some code in display.c that tried to fix existing windows if
the gconf setting changed, but which didn't actually do anything (at
least under gnome-shell). However, if 654643 was fixed then the new
behavior with this patch would be that changing the gconf setting
would affect new dialogs, but not existing ones.
https://bugzilla.gnome.org/show_bug.cgi?id=646761
get_outer_rect now returns the visible region, and a new get_input_rect
method returns the boundaries of the full frame, including the possible
invisible regions. When undecorated, both do the samething.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
There were actually *two* MetaFrameGeometry structs: one in theme-private.h,
one in frame.h. The latter public struct was populated by a mix of (void*)
casting and int pointers, usually pulling directly from the data in the private
struct.
Remove the public struct, replace it with MetaFrameBorders and scrap all
the pointer hacks to populate it, instead relying on both structs being used
in common code.
This commit should be relatively straightforward, and it should not do any
tricky logic at all, just a sophisticated find and replace.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
In preparation for switching to handling the output shape purely by what we
paint, stop applying a shape to the frame of the window. Even when we restore
handling the output shape, this will change the behavior with respect to input;
transparent areas between the frame and the contents will stop clicks rather
than passing them through, but that is arguably at least as expected
considering how that we decorate shaped windows with a frame all around.
https://bugzilla.gnome.org/show_bug.cgi?id=644930
When detaching/attaching a dialog, we were only updating
appears-focused on the parent if the child itself was focused, but in
fact, we need to do it if the child has an attached child which is
focused too.
To simplify the case of detaching a focused subtree from its parent,
we change meta_window_propagate_focus_appearance() to use
@window->display->focus_window as the window to add/remove as the
attached_focus_window, and @window only as the starting point to
propagate from. That way we can propagate focus-removal up to
@window's (soon-to-be-ex-)ancestors without having to remove it from
its descendants as well.
https://bugzilla.gnome.org/show_bug.cgi?id=647712
Don't set a window's xtransient_for if it would create a loop. Since
this is the only place we ever set xtransient_for, we can therefore
assume everywhere else that it does not loop.
https://bugzilla.gnome.org/show_bug.cgi?id=647712
Since version 3.0, GTK+ has support for style variants. At the moment,
themes may provide a dark variant, which can be requested by
applications via GtkSettings. The requested variant is exported to
X11 via the _GTK_THEME_VARIANT property - support this property, in
order to pick up the correct style variant in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=645355
If a window is not maximizable, then that probably means it looks dumb
at very large sizes. Even if its hints would allow you to manually
resize it to a large size, don't allow automatically tiling it to half
the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=647901
An ARGB window with a frame is likely something like a transparent
terminal. It looks awful (and breaks transparency) to draw a big
opaque black shadow under the window, so clip out the region under
the terminal from the shadow we draw.
Add meta_window_get_frame_bounds() to get a cairo region for the
outer bounds of the frame of a window, and modify the frame handling
code to notice changes to the frame shape and discard a cached
region. meta_frames_apply_shapes() is refactored so we can extract
meta_frames_get_frame_bounds() from it.
https://bugzilla.gnome.org/show_bug.cgi?id=635268
If a window can not be tiled, e.g. due to its minimum size hints,
dragging away from the top after activating the maximize tile preview
does not cancel the maximization request, the only way to do so is by
hitting Escape.
To fix, reset the tiling state in the maximize-tile code path as
well if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=646149
Apparently the "fox" toolkit doesn't set WM_CLIENT_MACHINE; while we
could do gymnastics to attempt to figure this out (talk to the X
server?), better to just default to FALSE.
https://bugzilla.gnome.org/show_bug.cgi?id=647662
Since appears-focus only propagates up from modal dialogs, if an
application removed the modal hint from a dialog before destroying it,
then its parent would be left with a stray reference to it in
attached_focus_window, causing it to be permanently appears-focused.
The obvious fix, calling meta_window_propagate_focus_appearance() when
the modal hint is removed, tends to cause noticeable flashing, because
the window will get drawn unfocused and then focused again.
So instead we just change meta_window_propagate_focus_appearance() to
check the window type only when focusing in, not when focusing out.
This would also cause flashing, but in this case we can avoid it by
not notifying the change in appears-focus on the parent window if it
is the expected_focus_window (which it will be by this point). (This
does mean though that if something weird happens and the window
doesn't end up becoming the focus window, it won't get redrawn
unfocused until something else forces it to.)
https://bugzilla.gnome.org/show_bug.cgi?id=647613
We need to redraw a window's shadow any time the value of
meta_window_appears_focused() changes. So make that into a property so
we can get notifications on it.
https://bugzilla.gnome.org/show_bug.cgi?id=636904
This is useful for DnD to another monitor in gnome-shell.
In addition to a normal move it corrects the saved rect for
maximized and fullscreened windows.
https://bugzilla.gnome.org/show_bug.cgi?id=645032
Currently attached modal dialogs are not resizable, but we don't
communicate this to GTK+, so the dialog may end up with resize
grips anyway. As a fix, allow resizing, but account for the dialog
being centered to its parent.
https://bugzilla.gnome.org/show_bug.cgi?id=643597
Commit 96c43866 changed the tiling behavior to prefer edge tiling
over maximization in corner cases (well, quite literally). As a
side effect, it only allows untiling of edge-tiled windows by
dragging the window towards the correct edge.
This patch restores the old behavior for untiling, while keeping
the new behavior for untiled windows.
https://bugzilla.gnome.org/show_bug.cgi?id=645455
For tiling, we check whether the pointer is near the edges of
the monitor where the pointer is located, so checking that the
pointer is within the bounds of the monitor is unnecessary and
confusing.
If dragging the title bar to the edge of the screen to side-tile,
it's easy to end up above the workarea and end up maximized instead.
Make the entire side of the screen act as edge-tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=644961
In a performance or regression testing environment, we may want to
only manage windows from a particular test program, and ignore all
other windows. The MUTTER_WM_CLASS_FILTER environment variable is a
list of WM_CLASS values that should be managed; other windows will
be unmapped and ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=644252
This adds a preference that when enabled makes all windows not on
the primary monitor be visible on all workspaces (i.e. not part of the
workspace switching handling).
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Sometimes on_all_workspaces is requested by the client/user, and sometimes
its calculated implicitly due to internal state. We split this up so that
we know when the user has explicitly asked for sticky window, when e.g.
setting wmspec properties or storing session info.
on_all_workspaces means this window is visible on all workspaces.
on_all_workspaces_requested, means the user explicitly made the window
sticky somehow (via imported session, _NET_WM_STATE from another wm,
toggled in the window menu, etc). It always implies on_all_workspaces is
TRUE.
Right now the only time we set on_all_workspaces is for override-redirect
windows, but later we can add a "windows on non-primary monitor are not
part of the workspace switching" feature.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
The latter move method will place the window by the origin of the
enclosing window decoration/frame, while the former will place by the
origin of the inner window, itself.
(Also moved meta_window_showing_on_its_workspace comment into
gtk-doc)
https://bugzilla.gnome.org/show_bug.cgi?id=642355
If mutter is going to be a "real" library, then it should install its
includes so that users can do
#include <meta/display.h>
rather than
#include <display.h>
So rename the includedir accordingly, move src/include to src/meta,
and fix up all internal references.
There were a handful of header files in src/include that were not
installed; this appears to have been part of a plan to keep core/,
ui/, and compositor/ from looking at each others' private includes,
but that wasn't really working anyway. So move all non-installed
headers back into core/ or ui/.
https://bugzilla.gnome.org/show_bug.cgi?id=643959
If we are previewing hidden windows, we might be previewing them in a context
like a thumbnail view of a workspace where we care about positioning. So, instead
of waiting until the window is first actually shown to place it, if
live_hidden_previews is set, place the window window when we first compute its
visibility, even if we don't end up showing it.
https://bugzilla.gnome.org/show_bug.cgi?id=641309
The previous tiling state of a grabbed window should be restored
if the drag operation is cancelled (by hitting the Escape key).
This might involve to meta_window_tile(), so export the function
in window-private.h.
https://bugzilla.gnome.org/show_bug.cgi?id=639988
To deal with reentrancy from compositor plugins doing things like
moving windows between workspaces in an effect callback, update
the visible_to_compositor flag before calling into the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=613124
Maximized tiled windows end up with an inconsistent tile mode when
unmaximized by other means than dragging the window free (e.g.
using the unmaximize button or double clicking the title bar), so
reset the tile mode when unmaximizing.
This is not a problem for side-by-side tiling, as there are no
alternatives to dragging the window free.
When a tiled window is maximized (e.g. by clicking the title bar
button), unmaximizing the window restores the tiled state. While
this is reasonable for side-by-side tiling, it is confusing for
"maximize" tiled windows, as unmaximization has no visible effect.
Change unmaximize to only restore the tiled state of side-by-side
tiled windows.
The original patch triggered "maximize" when the window was dragged
to the top, so that the pointer was below or on the monitor edge and
above the work area's top.
If there's no chrome at the top of the monitor, so that monitor edge
and work area top fall together, the pointer cannot be moved above
the work area's top, so tiling was not triggered.
The old behavior of being able to shake loose a maximized window
overlaps with and is for the most part superceded by top edge tiling.
This commit changes the code to only enable shake loose behavior
when edge tiling is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
In addition to the existing side-by-side tiling modes, this commit
adds a new "maximize" tiling mode. It allows the user to maximize
their windows (in other words, tile with the edge panels) by dragging
their window to the top edge of the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
The meta_window_handle_mouse_grab_op_event function ensures
the tile_mode variable is in a consistent state after a drag
op is finished.
The way this is current done is:
if (!window->maximized_vertically &&
window->tile_mode != META_TILE_NONE)
window->tile_mode = META_TILE_NONE;
While valid, it doesn't "read" as well as using the
META_WINDOW_TILED_SIDE_BY_SIDE macro, since the macro is specifically
about side-by-side tiling.
This commit just changes things to use the macro and to not bother
checking the tile mode (since if we just reset it anyway, then it doesn't
matter if the value is right or wrong to begin with).
https://bugzilla.gnome.org/show_bug.cgi?id=630548
Currently, the new tiling feature, supports side-by-side, horizontal
tiling when dragging windows to one of the vertical edges of a monitor.
Other types of tiling (on other monitor edges) are potentially useful,
though.
This commit renames the preference from side_by_side_tiling to
edge_tiling.
https://bugzilla.gnome.org/show_bug.cgi?id=630548
These functions duplicate existing properties; they are added for
convenience and to avoid the GObject property code on some
performance critical painting paths.
https://bugzilla.gnome.org/show_bug.cgi?id=592382
While the Meego developers agreed to switching mutter to GTK+-3.0
unconditionally a while ago, Canonical used a GTK+-2.0 build for their
Unity project. As Canonical now announced a switch to compiz as their
window manager, there is no longer a reason to maintain GTK+-2.0
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=633133
Remove --allow-unprefixed option to the scanner, and fix resulting
problems:
* theme.h and boxes.h are split into a main -header and a private
header that includes stuff that is not generally useful and
hard to introspect. Merge theme-parser.h into theme.h.
* meta_display_get_atom() and meta_window_get_window_type_atom()
are marked as (skip)
* Fix annotation: (element-type Strut) => (element-type Meta.Strut)
https://bugzilla.gnome.org/show_bug.cgi?id=632494
For functions (but not callback types), '(closure)' is used on the
callback parameter, and takes the name of the parameter which is
the closure/user data.
A maximized window can't be resized from the screen edges (preserves
Fitts law goodness for the application), but it's still possible
to start a resize drag with alt-middle-button. Currently we just
don't let the user resize the window, while showing drag feedback;
it's more useful to let the user "break" out from the resize.
This provides a fast way to get a window partially aligned with
the screen edges - maximize, then alt-drag it out from one edge.
Behavior choices in this patch:
- You can drag out a window out of maximization in both directions -
smaller and larger. This can be potentilaly useful in multihead.
- Dragging a window in only one direction unmaximizes the window
fully, rather than leaving it in a horizontally/vertically
maximized state. This is done because the horizontally/vertically
maximzed states don't have clear visual representation and can
be confusing to the user.
- If you drag back to the maximized state after breaking out,
maximization is restored, but you can't maximize a window by
dragging to the full size if it didn't start out that way.
A new internal function meta_window_unmaximize_with_gravity() is
added for implementing this; it's a hybrid of
meta_window_unmaximize() and meta_window_resize_with_gravity().
Port of the metacity patch from Owen Taylor in bug 622517.
https://bugzilla.gnome.org/show_bug.cgi?id=629931
When dragging a window over a screen edge and dropping it there,
maximize it vertically and scale it horizontally to cover the
corresponding half of the current monitor.
Whenever a "hot area" which triggers this behavior is entered, an
indication of window's target size is displayed after a short delay
to avoid distraction when moving a window between monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=606260
Add a preference /apps/mutter/general/attach_modal_dialogs. When true, instead
of having independent titlebars, modal dialogs appear attached to the titlebar
of the parent window and are moved together with the parent window.
https://bugzilla.gnome.org/show_bug.cgi?id=612726
Cleanly build with --warn-fatal. Implementation:
* Liberally apply (skip) where the API is clearly C only, e.g. uses
XLib. The theming code and MutterPlugin are skipped too.
* Add missing (transfer) and (element-type) annotations
For a few functions that had a comment, I turned it into gtk-doc, but
I didn't (with a few exceptions) try to write new documentation in
this pass.
When we do pseudo-management on an override-redirect window, we have to be
careful to augment the existing event mask, not replace it, or
delivery of pointer events will be disrupted.
When we unmanage a window, we shouldn't try to unselect events at all,
since that will interfere with event selection done by GDK.
http://bugzilla.gnome.org/show_bug.cgi?id=597763
A mismerge of the Metacity commit "4943d79 Prevent window self-maximisation"
caused the window's user set size and position to be saved *before*
actually resizing the window to the unmaximized position rather than after.
This meant that after unmaximization the window was in an inconsistent
state and anything that caused a resize to be queued (like a change in
window properties by the application) would cause it to pop back to
the maximized size and position.
https://bugzilla.gnome.org/show_bug.cgi?id=621413
It's useful for plugins to be able to easily detect whether
or not a window is from a remote host. Also, make use of this
in the window delete codepath, instead of looking up the hostname
each time.
https://bugzilla.gnome.org/show_bug.cgi?id=620585
A per-window _MUTTER_HINTS property allowing plugins to use custom hints. The
property holds a colon separated list of key=value pairs; plugin-specific keys
must be suitably namespaced, while 'mutter-' prefix is reserved for internal
Mutter use only.
This commit adds MetaWindow::mutter-hints property, and
meta_window_get_mutter_hints() accessor, as well as the internal machinery for
reading and updating of the hints.
https://bugzilla.gnome.org/show_bug.cgi?id=613123
Whether Metacity honors a raise request from an application should
not be affected by the raise_on_click setting; remove a check that
seems to have been added in error.
https://bugzilla.gnome.org/show_bug.cgi?id=445447
We currently allow XRaiseWindow when the same application (defined
by the window group) is focused, but the kind of old applications
that XRaiseWindow are frequently not setting the window group.
Expand the check to allow the same X client (defined by the looking
at client ID) to raise windows above the focus window.
https://bugzilla.gnome.org/show_bug.cgi?id=567528
Having a MetaDisplay::window-demands-attention signal allows to deal with
windows demanding attention in a cetralized fashion.
The signal is emitted when a window is created with initial demands-attention
state and/or when the state changes later on.
Based on original patch by Jon Nettleton.
https://bugzilla.gnome.org/show_bug.cgi?id=597052
With the change from bug 582639, we no longer call the reload
functions for properties that are not initially set, so the
initialization of fields in window.c has to match what
window-props.c would set for a missing property.
There was only one discrepancy, window->input, which needs
to be set to TRUE by default (or a window missing a WM_HINTS
property won't get focus); we also add explicit initializers
for a couple of fields that were getting 0-initialized
to the correct default value of FALSE for consistency with
the explicit intialization of the rest of the fields.
Bug reported by Dominique Leuenberger
https://bugzilla.gnome.org/show_bug.cgi?id=601228
For some consumers it's significantly more convenient to be able
to directly connect to a signal on the Window to know when
Mutter is done with it, rather than having to connect to each
Workspace object (and handle workspace additions, etc.).
Similarly, add window-created which acts globally.
https://bugzilla.gnome.org/show_bug.cgi?id=598289
When we focus a window on a different desktop, and the calc_showing
idle that hides/shows the windows gets run before we get focus events
back from X, we think that we are hiding the window with the focus
so we focus a "random" window to avoid leaving the user with no focus.
Work around this temporarily by checking display->expected_focus_window;
this isn't a perfect fix because there are cases where
display->expected_focus_window corresponds to a window we tried to
focus in the past but failed, but it makes things work fairly well.
https://bugzilla.gnome.org/show_bug.cgi?id=597352
There was a problem where if, for example, a restack was triggered
out of a clutter event handler, then after Clutter processed the
events, it would proceed immmediately on to repaint the stage without
ever returning control to the GLib main loop. So even though we
had an idle handler installed with a higher priority than the
Clutter stage repainting the clutter stage repainting would happen
first and we'd get a wrong frame.
Fix this by introducing the idea of "later functions", which abstract
the idea of "doing something later" away from g_idle_add() and use
a combination of GLib idle functions and Clutter "repaint functions"
to get our callbacks triggered at the right time, even when they
are installed from a clutter event handler.
https://bugzilla.gnome.org/show_bug.cgi?id=596334
This also resolve a FIXME where MUTTER_PRIORITY_BEFORE_REDRAW
could starve stage repainting.
mutter-window.c originally grew an #include "window-private.h" for
window->override_redirect, but that was just fixed. However since
then it also ended up relying on a few other minor private bits.
To fix that, add meta_window_is_mapped, promote meta_window_toplevel_is_mapped
to public, and use the public MetaDisplay accessor.
When window initially maps, use the more recent of NET_WM_USER_TIME and
startup notification timestamps to compare against last known user action to
decide whether to focus the window or not. Once we show the window, clear
the initial_timestamp_set flag, so the startup notification timestamp is not
taken into account again.
Based on patch for metacity by Alexander Larsson
http://bugzilla.gnome.org/show_bug.cgi?id=573922
Many override-redirect windows (including the Metacity UI windows!)
will have NET_WM_WINDOW_TYPE_NORMAL set on them because of shared
code paths with normal windows in toolkits.
Some current Compositor plugins (default plugin and gnome-shell)
check type == NORMAL to determine if to run effects. While fixing
such plugins to also check if the window is override-redirect is
posisble, it seems cleanest to simply not allow any of the decorated
window types to be set on an override-redirect window and to force
these types to META_WINDOW_OVERRIDE_OTHER. This will prevent other
similar problems from showing up in the future.
http://bugzilla.gnome.org/show_bug.cgi?id=590971
