If we have a CLICKING grab op we still need to send events to xwayland
so that we get them back for gtk+ to process thus we can't steer
wayland input focus away from it.
https://bugzilla.gnome.org/show_bug.cgi?id=726123
This ensures that we send the proper leave and enter events to wayland
clients.
Particularly, this solves a bug in SSD xwayland windows where clicking
and dragging on the title bar to move the window only works on the odd
turn (unless the pointer moves away from the title bar between
tries). This happens because xwayland gets a button press but doesn't
see the release so when it gets the next button press it discards it
because its pointer button tracking logic says that the button is
already pressed. Sending the proper wayland pointer leave event fixes
it since wayland clients must forget about button state at that point.
https://bugzilla.gnome.org/show_bug.cgi?id=726123
At one point, it was supported to run mutter without a compositor,
but we don't allow that any longer. A lot of code already assumes
display->compositor exists and doesn't check for a NULL pointer,
so just kill the rest of the checks.
This is specifically about managing X11 windows, not necessarily
running as an X11 compositor. By that I mean that this code is
still used for XWayland windows, and event handling is still and
modesetting / monitor management is still in core/.
This is also a fairly conservative move. We don't move anything
like screen.c or bell.c in here, even though those are really
only for X11 clients.
This is fairly simple and basic for now, with just skip_taskbar /
skip_pager, but eventually a lot of "WM policy" like this, including
move-resize, will be in subclasses for each individual surface.
We try to exempt CSD windows from being forced fullscreen if they are
undecorated and the size of the screen; however, we also catch almost
all windows that *do* need to be forced fullscreen in this check, since
they also have decorations turned off.
Identify actual CSD windows by checking whether _GTK_FRAME_EXTENTS is set -
GTK+ will always set this on CSD windows even if they have no invisible
borders or shadows at the current time.
We explicitly turn off the legacy-fullscreen check for native wayland windows
so we don't start legacy-fullscreening them if the new
meta_window_is_client_decorated() is later made more accurate.
https://bugzilla.gnome.org/show_bug.cgi?id=723029
The user_rect represents the unconstrainted window size, and lots
of code in mutter assumes it can resize to the user_rect at any
time. If we wait for an attach to ACK and save the user rect, we'll
see lots of flickering as code is resizing to the old user_rect
at any time.
Make it a compile-time flag rather than a run-time flag, because
practically any time you're going to be debugging event spewing,
you're going to have to recompile anyway. Remove the WITH_VERBOSE_MODE
checks, too.
Which is used for Wayland popup grabs.
The issue here is that we don't want the code that raises or focuses
windows based on mouse ops to run while a client has a grab.
We still keep the "old" grab infrastructure in place for now, but
ideally we'd replace it eventually with a better grab-op infrastructure.
Clutter's input device initial position defaults to (-1, -1) on most
backends but for the evdev backend we changed it to be inside the
stage to prevent the pointer from wandering outside the stage until it
first enters, after which our constraining callback won't let it go
out.
This makes us be in sync with the real position from the start.
_SVID_SOURCE has been deprecated in newer versions of glibc breaking
-WError; the recommended replacement of _DEFAULT_SOURCE is fairly
new, so switch to _XOPEN_SOURCE instead.
The "original coordinates" passed into meta_window_place() were the
coordinates of the client rectangle not the frame rectangle. When
meta_window_place() didn't place because the window was manually
positioned (e.g., 'xterm -geometry +x+y') that resulted in a window
being offset by the frame dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=724049
We need to resolve the keycode from the keysym again since the keycode
might have changed if there was a keymap switch between the grab and
the ungrab.
Before starting to use display_get_keybinding() we could compare
MetaKeyBinding.modifiers with MetaKeyCombo.modifiers directly. Now, we
need to resolve the virtual modifiers to match with the mask.
This allows us to look for a match with an O(1) search instead of O(n)
which is nice, particularly when running as a wayland compositor in
which case we have to do this search for every key press event (as
opposed to only when our passive grab triggers in the X compositor
case).
We actually need two hash tables. On one we keep all the keybindings
themselves which allows us to add external grabs without constantly
re-allocating the array we were using previously.
The other hash table is an index of the keybindings in the first table
by their keycodes and mask which is how we actually match the key
press events. This second table thus needs to be rebuilt when the
keymap changes since keycodes have to be resolved then but since we're
only keeping pointers to the first table it's a fast operation.
https://bugzilla.gnome.org/show_bug.cgi?id=725588
Instead of looping over an array of keybindings to find the correct
binding, just use display_get_keybinding().
In the next commit, we'll change the array to be a hash map, so this
helps the patch be cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=725588
We don't want to match the keysym so that e.g. an accelerator
specified as "<Super>a" works if the current keymap has a keysym other
than 'a' for that keycode which means that the accelerator would
become inaccessible in a non-latin keymap.
This is inconvenient for users that often switch keyboard layouts, or
even have different layouts in different windows, since they expect
system-level keybindings to not be affected by the current layout.
https://bugzilla.gnome.org/show_bug.cgi?id=678001
The only events we handle as XIEvents are FocusIn/Out, Enter and
Leave. Motion, ButtonPress/Release, KeyPress/Release are handled
through clutter instead.
Among other things, this means we don't need to fake motion compression
by peeking over gdk event queue...
Mouse event handling was duplicated, resulting in weird interactions
if clutter was allowed to see certain events (for example under
wayland, where it gets all events). Because now clutter sees all
X events, even when running as an x11 compositor, we can handle
everything using the clutter variants.
At the same time, rewrite a little the passive button grab code,
to make it clear what is being matched on what and why.
We must spoof events to clutter even if they are associated
with a MetaWindow, because keyboard events are always associated
with one (the focus window), and we must process keybindings
for window togheter with the global ones if they include Super,
because we're not going to see them again.
... and individually. It turns out that updating the opaque region
was causing the shape region to be updated, which was causing a new
shape mask to be generated and uploaded to the GPU. Considering
GTK+ regenerates the opaque region on pretty much any focus change,
this is not good.
The handler pointer is dangling in MetaKeyBinding until
rebuild_key_binding_table() is run, so we can't dereference it.
Because we only need the flags at ungrab time, store a copy
in the MetaKeyBinding structure.
https://bugzilla.gnome.org/show_bug.cgi?id=724402
For decorated windows, we don't want to apply any input
shape, because the frame is always rectangular and eats
all the input.
The real check is in meta-window-actor, where we consider
if we need to apply the bounding shape and the input shape
(or the intersection of the two) to the surface-actor,
but as an optimization we avoid querying the server in
meta-window.
Additionally, for undecorated windows, the "has input shape"
check is wrong if the window has a bounding shape but not an
input shape.
It triggers too often, making G_DEBUG=fatal-warnings quite useless.
Owen is going to rewrite this code sometime in the near future, so
I'm just gonna kill this warning for now.
If the last reference of a MetaIdleMonitor is held by the caller, it may
happen that the last reference is lost when calling the GDestroyNotify,
if this happens when the watched DBus name vanishes, the object (and the
watches hashtable) are destroyed while manipulating the watches hashtable,
so bad things may happen then.
Fix this by wrapping the operation by a ref/unref pair, so the object would
be destroyed after operating on the hashtable.
https://bugzilla.gnome.org/show_bug.cgi?id=724969
The rendering logic before was somewhat complex. We had three independent
cases to take into account when doing rendering:
* X11 compositor. In this case, we're a traditional X11 compositor,
not a Wayland compositor. We use XCompositeNameWindowPixmap to get
the backing pixmap for the window, and deal with the COMPOSITE
extension messiness.
In this case, meta_is_wayland_compositor() is FALSE.
* Wayland clients. In this case, we're a Wayland compositor managing
Wayland surfaces. The rendering for this is fairly straightforward,
as Cogl handles most of the complexity with EGL and SHM buffers...
Wayland clients give us the input and opaque regions through
wl_surface.
In this case, meta_is_wayland_compositor() is TRUE and
priv->window->client_type == META_WINDOW_CLIENT_TYPE_WAYLAND.
* XWayland clients. In this case, we're a Wayland compositor, like
above, and XWayland hands us Wayland surfaces. XWayland handles
the COMPOSITE extension messiness for us, and hands us a buffer
like any other Wayland client. We have to fetch the input and
opaque regions from the X11 window ourselves.
In this case, meta_is_wayland_compositor() is TRUE and
priv->window->client_type == META_WINDOW_CLIENT_TYPE_X11.
We now split the rendering logic into two subclasses, which are:
* MetaSurfaceActorX11, which handles the X11 compositor case, in that
it uses XCompositeNameWindowPixmap to get the backing pixmap, and
deal with all the COMPOSITE extension messiness.
* MetaSurfaceActorWayland, which handles the Wayland compositor case
for both native Wayland clients and XWayland clients. XWayland handles
COMPOSITE for us, and handles pushing a surface over through the
xf86-video-wayland DDX.
Frame sync is still in MetaWindowActor, as it needs to work for both the
X11 compositor and XWayland client cases. When Wayland's video display
protocol lands, this will need to be significantly overhauled, as it would
have to work for any wl_surface, including subsurfaces, so we would need
surface-level discretion.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
The input region was set on the shaped texture, but the shaped texture
was never picked properly, as it was never set to be reactive. Move the
pick implementation and reactivity to the MetaSurfaceActor, and update
the code everywhere else to expect a MetaSurfaceActor.
I implemented pinging, but never actually enabled the feature
properly on Wayland surfaces by setting the net_wm_ping hint to
TRUE, causing the fallback path to always be hit.
Rename net_wm_ping to can_ping so it doesn't take on an
implementation-specific meaning, and set it for all Wayland windows.
To prevent the MetaSurfaceActor from being destroyed, we normally
unparent it before we unmanage the window. However, this doesn't
work for XWayland windows, which we unmanage when we get UnmapNotify
or DestroyNotify, not when we get the wl_surface_destroy.
To solve this, add an early hook in meta_window_unmanage that
unparents the surface actor if we have one. At the same time, clean
up the destruction code to remove old comments and assumptions about
how wl_shell behaves.
This was a bad idea, as ping/pong has moved to a client-specific
request/event pair, rather than a surface-specific one. Revert
the changes we made here and correct the code to make up for it.
This reverts commit aa3643cdde.
If we fail to find the IDLETIME counter, then the alarm variable will be
uninitialised. Most code paths are careful to check this before
submitting XSync calls, but there is one check missing.
https://bugzilla.gnome.org/show_bug.cgi?id=724364
In order for the compositor to properly determine whether a client
is an X11 client or not, we need to wait until XWayland calls
set_window_id to mark the surface as an XWayland client. To prevent
the compositor from getting tripped up over this, make sure that
the window has been fully initialized by the time we call
meta_compositor_add_window.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
Traditionally, WMs unmap windows when minimizing them, and map them
when restoring them or wanting to show them for other reasons, like
upon creation.
However, as metacity morphed into mutter, we optionally chose to keep
windows mapped for the lifetime of the window under the user option
"live-window-previews", which makes the code keep windows mapped so it
can show window preview for minimized windows in other places, like
Alt-Tab and Expose.
I removed this preference two years ago mechanically, by removing all
the if statements, but never went through and cleaned up the code so
that windows are simply mapped for the lifetime of the window -- the
"architecture" of the old code that maps and unmaps on show/hide was
still there.
Remove this now.
The one case we still need to be careful of is shaded windows, in which
we do still unmap the client window. In the future, we might want to
show previews of shaded windows in the overview and Alt-Tab. In that
we'd also keep shaded windows mapped, and could remove all unmap logic,
but we'd need a more complex method of showing the shaded titlebar, such
as using a different actor.
At the same time, simplify the compositor interface by removing
meta_compositor_window_[un]mapped API, and instead adding/removing the
window on-demand.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
Prior to the DisplayConfig merge, we would set _NET_WM_FULLSCREEN_MONITORS
to (unsigned)-1 when unset. After that, we would have invalid
reads inside meta_screen_monitor_index_to_xinerama_index() (called
with -1).
The way I read the specification, the proper way to indicate
that the window is back to fullscreen on all monitors is to
remove the property, so do that.
Also, add an assertion that meta_screne_monitor_index_to_xinerama_index()
is doing the right thing.
https://bugzilla.gnome.org/show_bug.cgi?id=724258
The code that prevents the creation of multiple MonitorInfos for clones
wasn't working due to using the wrong index when getting the already
created info so fix that to use the correct one.
https://bugzilla.gnome.org/show_bug.cgi?id=710610
Use our new "surface_mapped" field to delay the showing of XWayland clients
until we have associated together the window's XID and the Wayland surface ID.
This ensures that when we show this window to the compositor, it will properly
use the Wayland surface for rendering, rather than trying to use COMPOSITE and
crash.
https://bugzilla.gnome.org/show_bug.cgi?id=720631
The goal here is to make MetaWindow represent a toplevel, managed window,
regardless of if it's X11 or Wayland, and build an abstraction layer up.
Right now, most of the X11 code is in core/ and the wayland code in wayland/,
but in the future, I want to move a lot of the X11 code to a new toplevel, x11/.
X11 window frames use special UI grab ops, like META_GRAB_OP_CLICKING_MAXIMIZE,
in order to work properly. As the frames in this case are X11 clients, we need
to pass through X events in this case. So, similar to how handle_xevent works,
use two variables, bypass_clutter, and bypass_wayland, and set them when we
handle specific events.
Using a full InputOutput window causes us to make a full Wayland surface
for it, and go through the X server. As the goal of the guard window is
a window for us to stack minimized windows under so we can prevent them
from getting input, it makes sense to use an InputOnly window here.
We no longer unmap the toplevel windows during normal operation. The
toplevel state is tied to the window's lifetime.
Call meta_compositor_add_window / meta_compositor_remove_window instead...
Traditionally, WMs unmap windows when minimizing them, and map them
when restoring them or wanting to show them for other reasons, like
upon creation.
However, as metacity morphed into mutter, we optionally chose to keep
windows mapped for the lifetime of the window under the user option
"live-window-previews", which makes the code keep windows mapped so it
can show window preview for minimized windows in other places, like
Alt-Tab and Expose.
I removed this preference two years ago mechanically, by removing all
the if statements, but never went through and cleaned up the code so
that windows are simply mapped for the lifetime of the window -- the
"architecture" of the old code that maps and unmaps on show/hide was
still there.
Remove this now.
The one case we still need to be careful of is shaded windows, in which
we do still unmap the client window. Theoretically, we might want to
show previews of shaded windows in the overview and Alt-Tab, so we remove
the complex unmap tracking for this later.
This reverts commit ebe6e3180e.
This is wrong, as mutter's controlling TTY may not be the same
as the active VT, and in fact won't be in the case of systemd
spawning us.
The "correct" API for this is to use David Herrmann's
"Session Positions" system to switch to another VT:
http://lists.freedesktop.org/archives/systemd-devel/2013-December/014956.html
cogl_texture_get_format() has been deprecated, so rather than using
it to figure out beforehand whether the buffer format is supported,
just rely on the import failing if it isn't.
https://bugzilla.gnome.org/show_bug.cgi?id=722347
Under some circumstances, for example when the display controller driver
doesn't report back the correct EDID, or under VirtualBox, Mutter
returns suboptimal strings for an output display name, leading to funny
labels like 'Unknown 0"', or '(null) 0"' in the Settings panel.
This commit improves our heuristic in three ways:
- we now avoid putting inches in the display name if either dimension is
zero
- we use the vendor name in case we're not able to lookup its PnP id
from the database. Previously we would have passed over '(null)'
- as a special edge-case, when neither inches nor vendor are known, we
use the string 'Unknown Display'
Finally, we make the combined vendor + inches string translatable, as
different languages might want to move the size part of the string to a
position different than the end.
https://bugzilla.gnome.org/show_bug.cgi?id=721674
When GDK sends an unmaximize _NET_WM_STATE ClientMessage, it tells us to remove
the _NET_WM_STATE_MAXIMIZED_HORZ and _NET_WM_STATE_MAXIMIZED_VERT states. Before
this time, it would independently call:
meta_window_unmaximize (window, META_MAXIMIZE_HORIZONTAL);
meta_window_unmaximize (window, META_MAXIMIZE_VERTICAL);
Which, besides being foolishly inefficient, would also mess up our saved_rect
tracking, causing the window to only look like it was unmaximized vertically.
Make this code more intelligent, so it causes us to unmaximize in one call.
https://bugzilla.gnome.org/show_bug.cgi?id=722108
This grab was added in commit caf43a123fhttps://bugzilla.gnome.org/show_bug.cgi?id=381127
to minimize window flickering when switching workspaces.
While this grab is held, some signals are emitted to the shell,
which can lead to deadlocks (reproduced under Mali binary OpenGLESv2
drivers).
Now that we are a compositing window manager, we do not have to
worry about flickers, this grab should no longer be necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=721709
Remove some obvious server grabs from the window creation codepath,
also ones that are taken at startup.
During startup, there is no need to grab: we install the event handlers
before querying for the already-existing windows, so there is no danger
that we will 'lose' some window. We might try to create a window twice
(if it comes back in the original query and then we get an event for it)
but the code is already protected against such conditions.
When windows are created later, we also do not need grabs, we just need
appropriate error checking as the window may be destroyed at any time
(or it may have already been destroyed).
The stack tracker is unaffected here - as it listens to CreateNotify and
DestroyNotify events and responds directly, the internal stack
representation will always be consistent even if the window goes away while
we are processing MapRequest or similar.
Now that there are no grabs we don't have to worry about explicitly calling
display_notify_window after grabs have been dropped. Fold that into
meta_window_new_shared().
https://bugzilla.gnome.org/show_bug.cgi?id=721345
The return code of XGetWindowAttributes() indicates whether an error
was encountered or not. There is no need to specifically check the error
trap.
The trap around XAddToSaveSet() was superfluous. We have a global error
trap to ignore any errors here, and there is no need to XSync() as GDK
will later ignore the error asynchronously if one is raised.
Also move common error exit path to an error label.
https://bugzilla.gnome.org/show_bug.cgi?id=721345
In meta_screen_manage_all_windows() we can use our own stack
tracker to get the list of windows - no need to query X again.
A copy is needed because the stack gets modified as part of the loop.
Specifically, meta_stack_tracker_get_stack() at this time returns the
predicted stack, and meta_window_new() performs a few operations
(e.g. framing) which cause immediate changes to the predicted stack.
https://bugzilla.gnome.org/show_bug.cgi?id=721345
meta_window_ensure_frame() creates its own grab and has a comment
claiming that it must be called under a grab too.
But the reasoning given in the comment does not seem relevant here.
We only frame non-override-redirect windows, so we are creating
the frame in response to MapRequest. There is no way that the child
could receive a MapNotify at this point, since that only happens
much later, once we go through the CALC_SHOWING queue and call
XMapWindow() from meta_window_show().
Remove the unnecessary grab.
https://bugzilla.gnome.org/show_bug.cgi?id=721345
Server grabs are not as evil as you might expect, but there is agreement
in that their usage should be limited.
Server grabs can cause things to go rather wrong when mutter emits
a signal while it has grabbed the server. If the receiver of that signal
waits for a synchronous action performed by another client, then you
have a deadlock. This happens with Mali binary GLESv2 drivers :(
https://bugzilla.gnome.org/show_bug.cgi?id=721345
The compositor code used to handle X windows that didn't have a
corresponding MetaWindow (see commit d538690b), which is why the
attribute query is separated.
As that doesn't happen any more, we can clean up. No functional changes.
Suggested by Owen Taylor.
https://bugzilla.gnome.org/show_bug.cgi?id=721345
As logind can give us a new FD at any time when it resumes. Theoretically,
this is still technically wrong, as the MetaCursorTracker holds onto it.
We'll fix this after we port to logind.
When we move focus elsewhere when unmanaging a window, we *need* to move
the focus, so if the target is globally active, move the focus to the
no-focus-window in anticipation that the focus will normally get moved
to the right window when the target window responds to WM_TAKE_FOCUS.
If the window doesn't respond to WM_TAKE_FOCUS, then focus will be left
on the no-focus-window, but there's no way to distinguish whether the
app will respond or not.
https://bugzilla.gnome.org/show_bug.cgi?id=711618
When a client spontaneously focuses their window, perhaps in response
to WM_TAKE_FOCUS we'll get a FocusOut/FocusIn pair with same serial.
Updating display->focus_serial in response to FocusOut then was causing
us to ignore FocusIn and think that the focus was not on any window.
We need to distinguish this spontaneous case from the case where we
set the focus ourselves - when we set the focus ourselves, we're careful
to combine the SetFocus with a property change so that we know definitively
what focus events we have already accounted for.
https://bugzilla.gnome.org/show_bug.cgi?id=720558
Initial placement during meta_window_constrain() can result in changes
to the borders, so we need to recompute our border sizes after
constraining. This fixes incorrect window borders on
initially maximized windows.
https://bugzilla.gnome.org/show_bug.cgi?id=720417
Currently the only way to move a window to another monitor via
keyboard is to start a move operation and move it manually using
arrow keys. We do have all the bits of a dedicated keybinding in
place already, so offer it as a more comfortable alternative.
https://bugzilla.gnome.org/show_bug.cgi?id=671054
Some drivers which support RandR 1.4 may not support setting
or getting the primary output, therefore mutter should trap
and ignore any relevant errors.
The modesetting driver exposes this problem when used in
combination with the nvidia binary driver using RandR 1.4
offloading.
Also use a local display variable instead of calling
meta_get_display () every time.
Do this by duplicating the current code and porting it to use
X again. A better approach would involve our own event structures,
and I really don't want to do that right now. We can clean this up
later.
The grab_window might be NULL, in which case we have a full-screen
grab, but we might still in a grab. Correct the check by asking
whether we're in a grab op or not.
When unmaximizing, we changed bits of window state, then called out
to code that used the frame extents *before* we cleared old cached
extents. Clear the cache up-front as soon as we change the window
state.
https://bugzilla.gnome.org/show_bug.cgi?id=714707
When _GTK_FRAME_EXTENTS changes, we need to redo constraints on
the window - this matters in particular if the toolkit removes
invisible borders when a window is maximized, since otherwise
the maximized window will be positioned as if it still has
invisible borders.
https://bugzilla.gnome.org/show_bug.cgi?id=714707
We require a MetaWindow to properly implement some of the requests
for xdg_surface, so add a way to have an unmapped MetaWindow that
we can store properties on, that we later map when the client
attaches a buffer...
The compiler is not quite smart enough to figure out that the condition
for setting the "compositor" variable matches a later condition for
accessing it, so express this in a way the compiler will understand.
For clarity, rename meta_window_get_outer_rect() to match terminology
we use elsewhere. The old function is left as a deprecated
compatibility wrapper.
Instead of passing around MetaFrameBorders, compute it when we need it.
This also allows us to know that we are using MetaFrameBorders only for windows
with frames (where it is meaningful) and not for frameless windows, which
can have custom borders which we need to interpret differently.
https://bugzilla.gnome.org/show_bug.cgi?id=707194
Cache the computed border size so we can fetch the border size at
any time without worrying that we'll be spending too much time in
the theme code (in some cases we might allocate a PangoFontDescription
or do other significant work.)
The main effort here is clearing the cache when various bits of window
state change that could potentially affect the computed borders.
https://bugzilla.gnome.org/show_bug.cgi?id=707194
There are extensive places in the code where we convert between the client
rectangle and the frame rectangle. Instead of manually doing it use
new helper functions on MetaWindow and the existing meta_window_get_outer_rect().
This fixes a number of bugs where the computation was being done incorrectly,
most of these bugs are with the recently added custom frame extents, but
some relate to invisible borders or even simply to confusion between the
window and frame rectangle.
Switch the placement code to place the frame rectangle rather
than the client window - this simplifies things considerably.
https://bugzilla.gnome.org/show_bug.cgi?id=707194
What we want to achieve is that the dialog is visually centered
on the parent, including the decorations for both, and making sure
that CSD/frame_extents are respected.
https://bugzilla.gnome.org/show_bug.cgi?id=707194
Use the "hotplug_mode_update" connector property indicating that the
screen settings should be updated: get a new preferred mode on hotplug
events to handle dynamic guest resizing (where you resize the host
window and the guest resizes with it).
https://bugzilla.gnome.org/show_bug.cgi?id=711216
Clients like on-screen keyboards try not to take focus when the user clicks
on their window by setting the Input hint to false. However, due to GTK+ and
GDK bugs, the public API for setting the Input hint to false don't remove
WM_TAKE_FOCUS from WM_PROTOCOLS, unintentionally putting them into Globally
Active mode.
These clients also expect that since they don't want to take focus, they want
the focus to remain on the existing window. In this case, for clients like
on-screen keyboards, it's so they can send synthesized keyboard events to the
focused window.
https://bugzilla.gnome.org/show_bug.cgi?id=710296
Since this is stored in an array full of data that will be copied
around, we can't rely on pointer addresses for every item in a stack
not changing.
I don't see any reason that we even have a weak pointer, either.
This code looks safe to me without it.
Rather than have MetaWaylandSeat do all the state management itself,
put the split between the root cursor and the window cursor in the
cursor tracker itself. We'll expand this to add a "grab" cursor in
the next commit, allowing us to force a cursor on grab operations.
There is now a meta_display_handle_event alongside the
meta_display_handle_xevent function which handles events in terms of
Clutter events instead of X events. A Clutter event filter is
registered so that all Clutter events will pass through this function.
The pointer event handling code from the X event version has been moved
into this new function and has been modified to use the details from
the Clutter event instead of the X event. This is a step towards
moving all of the event handling code over to use Clutter events.
Based-heavily-on-a-patch-by: Neil Roberts <neil@linux.intel.com>
This helps with git's diff code by moving all the giant indentation
changes, letting us know what's going on better when we move to
Clutter for event handling.
The plan is to make a new version of meta_display_handle_event that
will accept Clutter events instead of X events and then gradually move
over the events to the new function and finally remove the X version.
When X clients change the keyboard map, the also update a property
on the root window. We can notice that and rebuild our data structures
with the new values, as well as inform the wayland clients.
This is a terrible hack, and it's not how we want to implement things
in 3.12, but it's enough to have the same keyboard layout in the
shell, in X clients and in wayland clients in 3.10, until we decide
on the fate of the keyboard g-s-d plugin.
https://bugzilla.gnome.org/show_bug.cgi?id=707446
Expose min-backlight-step so that gnome-settings-daemon can
support backlights with less than 10 steps without mutter
normalizing the brightness back to its original value
https://bugzilla.gnome.org/show_bug.cgi?id=710380
When creating MetaCursorReference using a wl_resource, use the provided
hotspot coordinates.
This makes clients such as clickdot work more correctly.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=709593
The part of code dealing with move/resize grab in display.c is only
responsible of this behavior when triggered with a modifier. So it
shouldn't stop the move/resize behavior triggered from a mouse event
without modifier on the title bar or sides of the window.
https://bugzilla.gnome.org/show_bug.cgi?id=704759
Rather than do the cursor -> name translation ourselves in two different
places, use the facilities in libXcursor to do it for us. Put the shared
piece of code in meta-cursor-tracker, and use it for both server-side and
client-side cursor loading.
The destroy notify for a DBus watch holds a reference to the IdleMonitor,
but the IdleMonitorWatch object doesn't (it knows all watches will
be destroyed before the monitor is, so it doesn't need one). This
means that the DBus watch reference can be the only one keeping
the IdleMonitor alive (expecially true for device idle monitors,
which are only used by g-s-d/cursor), and that means that calling
the destroy notify freezes the monitor (and the next X calls
access garbage).
https://bugzilla.gnome.org/show_bug.cgi?id=708420
If you maximize a CSD window on a monitor without struts, it ends
up taking the whole monitor size, but it doesn't mean that the
application wants to fullscreen.
https://bugzilla.gnome.org/show_bug.cgi?id=708718
Need two passes, because the order we traverse the array is
alphabetical on connector name, not left to right, so we might
see a monitor on the right before we get the offset from disabling
the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=707473
No, holes in the framebuffer are not a good a thing: windows can
get lost there, and the user can get very confused.
Instead, compact the monitors that where previously after.
https://bugzilla.gnome.org/show_bug.cgi?id=707473
The XSync semantics mandate that alarms already expired will not
fire until the counter is reset and the alarm triggered again, so
clients traditionally called get_idle_time() first to see if they
should install the alarm.
This is inherently racy, as by the time the call is handled by
mutter and the reply received the idle time could be different.
Instead, if we see that the watch would have fired in the past,
fire it immediately.
This is a behavior change, but it's a compatible one, as all legacy
clients are calling get_idle_time() first, and it was perfectly
possible for the idle time counter to trigger the alarm right
after the get_idle_time() call.
https://bugzilla.gnome.org/show_bug.cgi?id=707302
To properly resize clients, we need to send them configure events
with the size we computed from the constraint system, and
then check if the new size they ask is compatible with
our expectation.
Note that this does not handle interactive resizing yet, it
merely makes the API calls work for wayland clients.
https://bugzilla.gnome.org/show_bug.cgi?id=707401
Make sure that meta_display_list_windows() returns wayland windows
too, by keeping a separate hash for wayland clients.
This fixes a crash in the alt-tab code of gnome-shell.
Reviewed by drago01 in IRC.
We don't have actual pointer barriers implemented, so this is a
quick workaround to trigger the fallback paths in the shell, for
the hot corner and the message tray.
To be reverted after 3.10
Not only this way we get the right Adwaita cursor as the default
(instead of shipping our own in png format), but we also add
support for all MetaCursors as root cursor (which most important
should allow us to have I-beams in shell entries)
https://bugzilla.gnome.org/show_bug.cgi?id=707573
Using the new Cogl API to actually modeset (because we can't
use the DRM API directly without controlling buffer swap), we
can finally have a KMS monitor backend, which means full display
configuration when running on bare metal.
https://bugzilla.gnome.org/show_bug.cgi?id=706308
At logout, we want to die when gnome-session tells us. Previously,
we were relying on the X server going down (killed by GDM at the
end of the session), but we can't use that in wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=706421
Warnings that are going to the journal should be not translated:
they're not user visible, and translating them would just make
bug reporting harder (as now the developers need to understand
what the warning is saying)
https://bugzilla.gnome.org/show_bug.cgi?id=707897
Switching meta/util.h to gi18n.h was wrong, mutter is a library
and needs gi18n-lib.h, but that cannot be included from a public
header (since it depends on config.h or command line options),
so split util.h into a public and a private part.
https://bugzilla.gnome.org/show_bug.cgi?id=707897
Move the option from the mutter binary to libmutter, and
rename from --nested to --wayland.
This allows gnome-shell to drop the set_is_wayland_compositor()
call.
https://bugzilla.gnome.org/show_bug.cgi?id=707897
clutter_stage_show_cursor()/hide_cursor() only works in the X11
backend (where someone else is in charge of showing the cursor),
and even then, it has confusing effects when running nested wayland,
so an abstraction layer is needed.
https://bugzilla.gnome.org/show_bug.cgi?id=707474
We don't get notifications from X11 when the mode is reset, so
our cached value can get stale. To work around that, always forward
requests to the backend (and let it deal with ignoring the change
if wanted)
https://bugzilla.gnome.org/show_bug.cgi?id=707649
Add a new interface, gtk_shell, than can be used by gtk to
retrieve a surface extension called gtk_surface, which will be
used to communicate with mutter all the GTK extensions to EWMH
https://bugzilla.gnome.org/show_bug.cgi?id=707128
Add support for GTK application menus
To do so, we need to be able to set surface state before creating
the MetaWindow, so we introduce MetaWaylandSurfaceInitialState as
a staging area.
The gtk-shell-surface implementation would either write to the
initial state, or directly to the window.
At the same, implement set_title and set_class too, because it's
easy enough.
https://bugzilla.gnome.org/show_bug.cgi?id=707128
If, checking the event timestamps, we see that a new configuration
was explicitly requested by an another XRandR client, don't proceed to
apply the intended configuration again, even if looking at the
EDIDs it appears that the outputs changed.
This works around some buggy Xorg drivers (qxl, vbox) that generate
a new serial number everytime the user resizes the host window.
https://bugzilla.gnome.org/show_bug.cgi?id=706735
device_id_max is set to the device_id in ensure_device_monitor(), but we
will loop only to (device_id_max - 1) when propagating the sync XEvent
down, missing the device correspondng to device_id_max.
https://bugzilla.gnome.org/show_bug.cgi?id=707250
Once mutter is started from weston-launch on its own VT, there is
no way to change VT again (for example to actually start an application),
because the keyboard is put in raw mode.
So introduce some keybindings mimicking the standard X ones (Ctrl+Alt+Fn)
that switch the VT manually when activated.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
Now that we have a setuid launcher binary, we can make use of
using a private protocol through the socket we're passed at startup.
We also use the new hook in clutter-evdev to ask mutter-launch for
the FDs of the input devices we need, and we emulate the old X
DRM lock with a nested GMainContext without sources.
In the future, mutter-launch will be replaced with the new logind
API currently in development.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
The user active watch is a one-fire watch, but it is valid in the API
for the callback to explicitly remove the watch itself. In that case,
the watch will be invalid after the user removes it, and the memory
potentially freed. So make sure to not dereference the watch after
the callback is called.
https://bugzilla.gnome.org/show_bug.cgi?id=706825
Dialogs that don't have a parent should not be skip-taskbar,
otherwise they get lost and there is no way to recover them
(because they're not autoraised when activating the parent),
but toolkits and applications set the hint anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=673399
If we're attempting to reconfigure the CRTCs to the same parameter,
skip the X call, as in some drivers a modeset can take time and
cause flicker.
https://bugzilla.gnome.org/show_bug.cgi?id=706672
To allow other clients (gnome-session, gnome-settings-daemon)
to monitor user activity, introduce a DBus interface for the
idle monitor inside mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=706005
When running as a wayland compositor, we can't use the xserver's
IDLETIME, because that's updated only in response to X events.
But we have all the events ourselves, so we can just run the timer
in process.
https://bugzilla.gnome.org/show_bug.cgi?id=706005
We can't use the X11 stage window, if clutter is not using the X11
backend (and even if it was, it would be bogus when the xwayland
server is not the one clutter is talking to). Instead, we introduce
the concept of "focus type", which we use to differentiate the
various meanings of None in the focus_xwindow field.
https://bugzilla.gnome.org/show_bug.cgi?id=706364
Using out-of-band notifications from the wayland protocol or from
X is racy, in that the client could ask for the new resources before
we have them.
Instead, with a signal, we are sure that when the client asks for
it, it will get the right values.
https://bugzilla.gnome.org/show_bug.cgi?id=706382
Under X, we need to use XFixes to watch the cursor changing, while
on wayland, we're in charge of setting and painting the cursor.
MetaCursorTracker provides the abstraction layer for gnome-shell,
which can thus drop ShellXFixesCursor. In the future, it may grow
the ability to watch for pointer position too, especially if
CursorEvents are added to the next version of XInput2, and thus
it would also replace the PointerWatcher we use for gnome-shell's
magnifier.
https://bugzilla.gnome.org/show_bug.cgi?id=705911
The value passed to XRRCrtcSetGamma must be allocated with
XRRAllocGamma (because it relies on the locations of green and blue),
otherwise garbage is sent on the wire.
https://bugzilla.gnome.org/show_bug.cgi?id=706231
We were relying on the XRandR events from the X server to update
the configuration, but we were calling meta_monitor_config_update_current()
immediately after, so the MonitorConfig would be updated with the
old configuration (and we would save that to disk!)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
First disable CRTCs that should be off in the new configuration,
then resize the framebuffer, then enable the new CRTCs.
If we don't do that, and we're making the screen smaller, X complains
with a BadMatch.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add "edid-file", if we have one (in the KMS case, where we can point
people to the right sysfs file), or "edid" with inline data.
These are needed by colord to build the default ICC profile for
uncalibrated displays.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Instead of keeping a forest of if backend else ..., use a subclass
and virtual functions to discriminate between XRandR and the
dummy backend (which lives in the parent class togheter with the
common code)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
We want to show a dialog when a display change happens from the
control center. To do so, add a new vfunc to MetaPlugin and
call it when a configuration change is requested via DBus.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add GetCrtcGamma() and SetCrtcGamma(), that wrap the similarly
named XRandR API. These are used by GnomeRR inside the color
plugin of the control center (and may go away if the color
plugin decides to do something different under wayland)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
GnomeRR needs that too.
The backlight is exported as a normalized 0-100 value, or -1 if not
supported. Clamping to HW limits is handled by the backend.
Changing backlight uses a different method call, to avoid recomputing
the full display configuration every time the user presses the
backlight keys.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
The default configuration is extended, which is only possible
if there are as many CRTCs as outputs, so make sure that's true.
Also, add more and bigger modes, so that different sizes will
be chosen for the three outputs.
A nice side effect of this is that with a real 1920x1080 + 1600x900
layout, if you disable the VGA you get a stage that matches the
screen size, which triggers the legacy fullscreen path in the
outside mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Use a private output property to store if the output is in
presentation mode or not, so that this information is not lost
after the configuration read back from the server.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Ripped off libgnome-desktop, trimming the parts that checked
that the configuration was plausible, as that should be done
in gnome-control-center before asking mutter for a change.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add a new object, MetaMonitorConfig, that takes care of converting
between the logical configurations stored in monitors.xml and
the HW resources exposed by MonitorManager.
This commit includes loading and saving of configurations, but
still missing is the actual CRTC assignments and a default
configuration when none is found in the file.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Read the current transform from XRandR, and expose the transforms
that are really supported on the bus.
The dummy backend now advertises all transforms, since it doesn't
actually apply them.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add a number of dummy outputs and modes to the dummy backend,
and implement the writing bits.
The only visible effect is that you can change the screen size,
which resizes the output window.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Now MonitorManager does its own handling of XRandR events, which
means we no longer handle ConfigureNotify on the root window.
MetaScreen reacts to MonitorManager::monitor-changed and updates
its internal state, including the new size.
This paves the way for doing display configuration using only
the dummy backend, which would allow testing wl_output interfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Implement ApplyConfiguration in terms of XRandR calls.
Error checking is done before actually committing the configuration.
If mutter is using one of the other monitor config backends, an
error is reported and nothing happens.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Turns out that even if two outputs say that they can be controlled
by a given CRTC, you can't configure them in the same CRTC unless
they are marked as "possible clones" one of the other.
This can further restrict the configuration options, so we need
to expose this limitation in the DBus API.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
This new interface will be used by the control center and possibly
the settings daemon to configure the screens. It is designed to
resemble a simplified XRandR, while still exposing all the quirks
of the hardware, so that the panel can limit the user choices
appropriately.
To do so, MetaMonitorMode needs to track CRTCs, outputs and modes,
so the low level objects have been decoupled from the high-level
MetaMonitorInfo, which is used by core and API and offers a simplified
view of HW, that hides away the details of what is cloned and how.
This is still not efficient as it should be, because on every
HW change we drop all data structures and rebuild them from scratch
(which is not expensive because there aren't many of them, but
at least in the XRandR path it involves a few sync X calls)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Consolidate all places that deal with output configuration in
MetaScreen, which gets it either from XRandR or from a dummy static configuration.
We still need to read the Xinerama config, even when running xwayland,
because we need the indices for _NET_WM_FULLSCREEN_MONITORS, but
now we do it only when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
It is a very bad idea in a glib program (especially one heavily
using glib child watching facilities, like gnome-shell) to handle
SIGCHLD. While we're there, let's also use g_spawn_async, which
solves some malloc-after-fork problems and makes the code generally
cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=705816
The previous code was leaving focus fields dirty in MetaWaylandPointer
and MetaWaylandKeyboard at time (which could crash the X server
because of invalid object IDs)
The new code is more tighly integrated in the normal X11 code
for handling keyboard focus (meaning that the core idea of input
focus is also correct now), so that meta_window_unmanage() can
do the right thing. As a side benefit, clicking on wayland clients
now unfocus X11 clients.
For the mouse focus, we need to clear the surface pointer when
the metawindowactor is destroyed (even if the actual actor is
kept alive for effects), so that a repick finds a different pointer
focus.
https://bugzilla.gnome.org/show_bug.cgi?id=705859
This copies the basic input support from the Clayland demo compositor.
It adds a basic wl_seat implementation which can convert Clutter mouse
events to Wayland events. For this to work all of the wayland surface
actors need to be made reactive.
The wayland keyboard input focus surface is updated whenever Mutter
sees a FocusIn event so that it will stay in synch with whatever
surface Mutter wants as the focus. Wayland surfaces don't get this
event so for now it will just give them focus whenever they are
clicked as a hack to test the code.
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
This breaks down the assumptions in stack-tracker.c and stack.c that
Mutter is only stacking X windows.
The stack tracker now tracks windows using a MetaStackWindow structure
which is a union with a type member so that X windows can be
distinguished from Wayland windows.
Some notable changes are:
Queued stack tracker operations that affect Wayland windows will not be
associated with an X serial number.
If an operation only affects a Wayland window and there are no queued
stack tracker operations ("unvalidated predictions") then the operation
is applied immediately since there is no server involved with changing
the stacking for Wayland windows.
The stack tracker can no longer respond to X events by turning them into
stack operations and discarding the predicted operations made prior to
that event because operations based on X events don't know anything
about the stacking of Wayland windows.
Instead of discarding old predictions the new approach is to trust the
predictions but whenever we receive an event from the server that
affects stacking we cross-reference with the predicted stack and check
for consistency. So e.g. if we have an event that says ADD window A then
we apply the predictions (up to the serial for that event) and verify
the predicted state includes a window A. Similarly if an event says
RAISE_ABOVE(B, C) we can apply the predictions (up to the serial for
that event) and verify that window B is above C.
If we ever receive spurious stacking events (with a serial older than we
would expect) or find an inconsistency (some things aren't possible to
predict from the compositor) then we hit a re-synchronization code-path
that will query the X server for the full stacking order and then use
that stack to walk through our combined stack and force the X windows to
match the just queried stack but avoiding disrupting the relative
stacking of Wayland windows. This will be relatively expensive but
shouldn't be hit for compositor initiated restacking operations where
our predictions should be accurate.
The code in core/stack.c that deals with synchronizing the window stack
with the X server had to be updated quite heavily. In general the patch
avoids changing the fundamental approach being used but most of the code
did need some amount of re-factoring to consider what re-stacking
operations actually involve X or not and when we need to restack X
windows we sometimes need to search for a suitable X sibling to restack
relative too since the closest siblings may be Wayland windows.
This adds support for running mutter as a hybrid X and Wayland
compositor. It runs a headless XWayland server for X applications
that presents wayland surfaces back to mutter which mutter can then
composite.
This aims to not break Mutter's existing support for the traditional X
compositing model which means a single build of Mutter can be
distributed supporting the traditional model and the new Wayland based
compositing model.
TODO: although building with --disable-wayland has at least been tested,
I still haven't actually verified that running as a traditional
compositor isn't broken currently.
Note: At this point no input is supported
Note: multiple authors have contributed to this patch:
Authored-by: Robert Bragg <robert@linux.intel.com>
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Rico Tzschichholz.
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
This adds a --nested option to request that mutter no longer run as a
classic X compositor with an output window mapped on the X Composite
Overlay Window and also not assume it is running directly under X.
The intention is that in this mode Mutter will itself launch a headless
X server and display output will be handled by Clutter and Cogl. This
will enable running Mutter nested as an application within an X session.
This patch introduces an internal meta_is_wayland_compositor() function
as a means to condition the way mutter operates when running as a
traditional X compositor vs running as a wayland compositor where the
compositor and display server are combined into a single process.
Later we also expect to add a --kms option as another way of enabling
this wayland compositor mode that will assume full control of the
display hardware instead of running as a nested application.
We now track whether a window has an input shape specified via the X
Shape extension. Intersecting that with the bounding shape (as required
by the X Shape extension) we use the resulting rectangles to paint
window silhouettes when picking. As well as improving the correctness of
picking this should also be much more efficient because typically when
only picking solid rectangles then the need to actually render and issue
a read_pixels request can be optimized away and instead the picking is
done on the cpu.
Originally attached dialogs did not have a titlebar, which the code
still assumes though it hasn't been true for a while; nowadays, the
actual look of attached dialogs is controlled by the theme.
As GTK+ recently gained the ability to set custom titlebars, we need
to support attached dialogs with either full borders (WM decorations)
or border-only (GTK+ titlebar).
Just remove the left-over assumption to make it work as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=702764
We need to update window->monitor on override_redirect windows as well, other
wise they may end up with an invalid struct which triggers and assert when
meta_window_is_monitor_sized is called.
https://bugzilla.gnome.org/show_bug.cgi?id=702564
Avoid a round trip to the xserver we already have the current position
anyway. Querying from the server on every move can cause the compositor to
stall during movement.
Add new api (meta_screen_get_current_monitor_for_pos and
meta_screen_get_current_monitor_info_for_pos) that allow querying the monitor
without a roundtrip by reusing the passed in cursor position.
gnome-shell needs to know whether the stage window is focused so
it can synchronize between stage window focus and Clutter key actor
focus. Track all X windows, even those without MetaWindows, when
tracking the focus window, and add a compositor-level API to determine
when the stage is focused.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
When we set the input focus, we first set the predicted window,
and then try to process focus events. But as XI_FocusOut on the
existing window comes before XI_FocusIn on the new window, we'll
see the focus out on the old window and think the focus is going
to nothing, which makes mutter think the prediction failed.
This didn't really matter as nothing paid attention to the focus
window changing, but with gnome-shell's focus rework, we'll try
and drop keyboard focus in events like these.
Fix this by making sure that we ignore focus window changes of our
own cause when updating the focus window field, by ignoring all
focus events that have a serial the same as the focus request or
lower. Note that if mutter doens't make any requests after the
focus request, this could be racy, as another client could steal
the focus, but mutter would ignore it as the serial was the same.
Bump the serial by making a dummy ChangeProperty request to a
mutter-controlled window in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=701017
We have no need for normally reported events during grabs. In fact, it
might be harmful. A plugin might grab the keyboard through
meta_begin_modal_for_plugin() and then expect events to be reported to
the grab window they provide. If meanwhile this XIGrabDevice is
issued, events might start being reported normally to one other of our
windows breaking the plugin event processing.
In particular, on an empty workspace, we set input focus to our
no_focus_window. Then, if gnome-shell calls
meta_begin_modal_for_plugin() and meta_display_freeze_keyboard(), in
that order, input events will start being reported to no_focus_window.
There are two issues with this. One is that no_focus_window isn't
selecting for XI input events and thus the server discards them
completely. But even if that is fixed, events being reported to any
window other than the one gnome-shell expects - the clutter stage
window - means that events will stop reaching it.
https://bugzilla.gnome.org/show_bug.cgi?id=701219
This will make it possible to implement input source switching in
gnome-shell using the popular modifiers-only keybinding that's
implemented on the X server through an XKB option.
https://bugzilla.gnome.org/show_bug.cgi?id=697002
We'll use this in gnome-shell to freeze the keyboard right before
switching input source and unfreeze it after that's finished so that
we don't lose any key events to the wrong input source.
https://bugzilla.gnome.org/show_bug.cgi?id=697001
If a binding is updated with a clear set of strokes (effectively
disabling it) we aren't signaling that the binding changed and thus
the previous strokes will continue to be grabbed.
This fixes that and tries to do a better effort at checking if the
binding changed or not.
https://bugzilla.gnome.org/show_bug.cgi?id=697000
gnome-shell has traditionally just called XSetInputFocus when wanting to
set the input focus to the stage window, but this might cause strange,
hard-to-reproduce bugs because of an interference with mutter's focus
prediction. Add API to allow gnome-shell to focus the stage window that
also updates mutter's internal focus prediction state.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
If an app pops up an OR window and sets input focus to it, like
Steam does, we'll think the focus window is null, causing us to
think the app is not focused.
OR windows should not be special if they get input focus, where
the input focus would be set to NULL. Instead, the window should
be marked as focused.
https://bugzilla.gnome.org/show_bug.cgi?id=647706
Mutter previously defined display->focus_window as the window that the
server says is focused, but kept display->expected_focus_window to
indicate the window that we have requested to be focused. But it turns
out that "expected_focus_window" was almost always what we wanted.
Make MetaDisplay do a better job of tracking focus-related requests
and events, and change display->focus_window to be our best guess of
the "currently" focused window (ie, the window that will be focused at
the time when the server processes the next request we send it).
https://bugzilla.gnome.org/show_bug.cgi?id=647706
Make it a static function for now, but this will be a private
function soon, replacing meta_window_lost_focus. This should
contain no functional changes, only cosmetic indentation changes,
so best viewed with ignorews=1 or -w or -b, you know the drill.
https://bugzilla.gnome.org/show_bug.cgi?id=647706
Clients using _NET_WM_MOVERESIZE to start a drag operation may encounter
a race condition if the user presses and releases a mouse button very
fast, getting "stuck" in a grab state. While this is easily fixed with
the user pressing the button or hitting Escape as the EWMH spec suggests,
its's still a bit of annoyance for users.
After starting a grab operation, check that the button is actually pressed
by the client, and if not, cancel the grab operation. This prevents the
stuck grab in a race-free way, although it requires an extra round-trip
to the server.
With client-side decorations becoming more popular, the use of
_NET_WM_MOVERESIZE is on the rise, thus this bug is seen more frequently
than before.
https://bugzilla.gnome.org/show_bug.cgi?id=699777
As we only had one string-array preference so far, we didn't bother
with adding a generic way to handle string-array preferences, and
just handled the preference in question explicitly. However we are
going to parse another string-array setting, so generalize the
existing code to make it reusable for that case.
https://bugzilla.gnome.org/show_bug.cgi?id=700223
This essentially just moves install_corners() from the compositor, through
the core, into the UI layer where it arguably should have been anyway,
leaving behind stub functions which call through the various layers. This
removes the compositor's special knowledge of how rounded corners work,
replacing it with "ask the UI for an alpha mask".
The computation of border widths and heights changes a bit, because the
width and height used in install_corners() are the
meta_window_get_outer_rect() (which includes the visible borders but not
the invisible ones), whereas the more readily-available rectangle is the
MetaFrame.rect (which includes both). Computing the same width and height
as meta_window_get_outer_rect() involves compensating for the invisible
borders, but the UI layer is the authority on those anyway, so it seems
clearer to have it do the calculations from scratch.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=697758
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
XUngrabKey() doesn't work for XI2 grabs and XI2 doesn't provide API
with similar functionality. As such, we have to refactor the code a
bit to be able to call XIUngrabKeycode() for each key binding, then
reload keybindings and finally grab the new ones.
https://bugzilla.gnome.org/show_bug.cgi?id=697003
In 97a4cc8c, we accidentally lost the check that kept us from
sending multiple configures to a window before it responds to
_NET_WM_SYNC_REQUEST. So _NET_WM_SYNC_REQUEST stopped working
properly. Add a check back with the same effect.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
During a resize, if we don't have a configure pending, then a counter
change shouldn't trigger anything other than the normal drawing:
it's just a spontaneous frame from the application. So don't try
to update the position or remove our timeout ID.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
Trying to track the fullscreen status outside of Mutter, as GNOME Shell
was doing previously, was very prone to errors, because Mutter has a
very tricky definition of when a window is set to be fullscreen and
*actually* acting like a fullscreen window.
* Add meta_screen_get_monitor_in_fullscreen() and an
::in-fullscreen-changed signal. This allows an application to
track when there are fullscreen windows on a monitor.
* Do the computation of fullscreen status in a "later" function that
runs after showing, so we properly take focus into account.
* To get ordering of different phases right, add more values
to MetaLaterType.
* Add auto-minimization, similar to what was added to GNOME Shell
earlier in this cycle - if a window is set to be fullscreen, but
not actually fullscreen, minimize.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
Since the tile mode is now always reset on maximize(), this code
no longer does anything (not to mention that side-by-side tiled
windows haven't snapped back for a while now).
https://bugzilla.gnome.org/show_bug.cgi?id=682779
We used to restore side-by-side tiling when unmaximizing, so we
kept the tile-mode during maximization. Since commit 10d53fc7d
there's no longer a good reason to do so, and it can result in
tile previews being shown erroneously on window drag operations
without motion (double-click on titlebar), so reset the tile
mode in maximize().
https://bugzilla.gnome.org/show_bug.cgi?id=682779
The tile preview is expected to be shown underneath the focus window.
However the code that restacks the preview broke when override-redirect
windows were moved to a separate window group.
To fix, special-case tile previews to put them in the NORMAL layer.
https://bugzilla.gnome.org/show_bug.cgi?id=696053
