Normally we bail out in `sync_actor_geometry()`. The comment there
states:
```
Normally we want freezing a window to also freeze its position; this allows
windows to atomically move and resize together, either under app control,
or because the user is resizing from the left/top. But on initial placement
we need to assign a position, since immediately after the window
is shown, the map effect will go into effect and prevent further geometry
updates.
```
The signal for the initial sync originates in `MetaWindow` though and predates
`xdg_toplevel_set_maximized`, which again calls `meta_window_force_placement`,
triggering the signal too early. As a result, Wayland clients that start up
maximized have a wrong map animation, starting in the top-left corner.
In order to fix this without changing big parts of the geometry logic and risking
regressions, force the initial sync again before mapping.
Solution suggested by Jonas Ådahl.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1164
IBusInputContext/ClutterInputFocus/GtkIMContext all go for offset+len
for their ::delete-surrounding signals, with offset being a signed int
(neg. to delete towards left of selection, pos. to delete towards right
of selection) and len being an unsigned int from the offset (and
presumably, skipping the current selection).
The text-input protocols however pass in this event two unsigned integers,
one being the length of text to delete towards the left of the selection,
and another the length of text to delete towards the right of the selection.
To translate properly these semantics, positive offsets shouldn't account
for before_length, and negative offset+len shouldn't account for after_length.
The offset/length approach may of course represent deletions that are
detached from the current cursor/selection, we simply delete the whole range
from the cursor/selection positions then.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/517
The input method can assign a negative value to
clutter_input_method_delete_surrounding() to move the cursor to the left.
But Wayland protocol accepts positive values in delete_surrounding() and
GTK converts the values to the negative ones in
text_input_delete_surrounding_text_apply().
https://gitlab.gnome.org/GNOME/mutter/issues/539
GObject recommends to break references to other objects on dispose
instead of finalize, also we want to release the pressed virtual buttons
as early as possible if we know the object is getting destroyed.
So release the pressed buttons and unref our virtual
MetaInputDeviceNative when the dispose vfunc is called, which also
allows us to release the buttons immediately from javascript instead of
waiting for the garbage collector by calling run_dispose() on the
object.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1157
This allows us to screencast any window continuously, even
without it being visible. Because it's still being painted,
clients continue to receive frame callbacks, and people
are happy again.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1129
Just like what's done for monitor screencasting. Unfortunately, there's
no mechanism to share fences with PipeWire clients yet, which forces
us to guarantee that a frame is completed after blitting.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1129
MetaScreenCastWindowStreamSrc connects to the "damaged" signal of
MetaWindowActor. This signal is not exactly tied to the paint cycle
of the stage, and a damage may take quite a while to arrive when
a client doesn't want to draw anything. For that reason, the window
screencast can start empty, waiting for a damage to arrive.
Ensure at least one frame is recorded when enabling the window stream.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1097https://gitlab.gnome.org/GNOME/mutter/merge_requests/1129
cogl_framebuffer_push_rectangle_clip() acts on the current modelview
matrix. That means the result of clipping then translating will be
different of the result of translating then clipping.
What we want for window screencasting is the former, not the latter.
Move the translation code (and associated) to after clipping.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1097https://gitlab.gnome.org/GNOME/mutter/merge_requests/1129
When calculating the transform we should apply to the cursor sprite
before uploading it to the cursor plane, we must also take into
account non upright mounted LCD panels.
Otherwise the cursor ends up 90 degrees rotated on devices where the
LCD panel is mounted 90 degrees rotated in its enclosure.
This commit fixes this by calling meta_monitor_logical_to_crtc_transform
in get_common_crtc_sprite_transform_for_logical_monitors to adjust the
transform for each Monitor in the LogicalMonitor.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1123https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1153
Support for them appears to be way less common than e.g. png, which is
currently the preferred format from Firefox, Chromium, Libreoffice and others.
Adopt to that fact.
As a side effect, this works around a bug observed when copying images in
Firefox on Wayland.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1141
When resizing a window interactively, we'll set a grab operation and a
grab window, among other things. If we're resizing (including setting
initial size, i.e. mapping) another window, that didn't change position,
don't use the gravity of the grab operation when resizing our own
window.
This fixes an issue with jumpy popup position when moving a previously
mapped gtk popover.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/999
The transactional KMS API has been modelled after atomic KMS. Atomic KMS
currently doesn't support forwarding cursor hotspot metadata, thus it
was left out of the transactional KMS API having the user set the simply
create a plane assigment with the cursor sprite assigned to a cursor
plane using regular coordinates.
This, however, proved to be inadequate for virtual machines using
"seamless mouse mode" where they rely on the cursor position to
correspond to the actual cursor position of the virtual machine, not the
cursor plane. In effect, this caused cursor positions to look "shifted".
Fix this by adding back the hotspot metadata, right now as a optional
field to the plane assignment. In the legacy KMS implementation, this is
translated into drmModeSetCursor2() just as before, while still falling
back to drmModeSetCursor() with the plane coordinates, if either there
was no hotspot set, or if drmModeSetCursor2() failed.
Eventually, the atomic KMS API will learn about hotspots, but when
adding our own atomic KMS backend to the transacitonal KMS API, we must
until then still fall back to legacy KMS for virtual machines.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1136
When calculating the resource scale of a clone source, we might end up
in situations where we fail to do so, even though we're in a paint. A
real world example when this may happen if this happens:
* A client creates a toplevel window
* A client creates a modal dialog for said toplevel window
* Said client commits a buffer to the modal before the toplevel
If GNOME Shell is in overview mode, the window group is hidden, and the
toplevel window actor is hidden. When the clone tries to paint, it fails
to calculate the resource scale, as the parent of the parent (window
group) is not currently mapped. It would have succeeded if only the
clone source was unmapped, as it deals with the unmapped actor painting
by setting intermediate state while painting, but this does not work
when the *parent* of the source is unmapped as well.
Fix this by inheriting the unmapped clone paint even when calculating
the resource scale.
This also adds a test case that mimics the sequence of events otherwise
triggered by a client. We can't add a Wayland client to test this, where
we actually crash is in the offscreen redirect effect used by the window
dimming feature in GNOME Shell.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/808https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1147
For HiDPI pointer cursors backed by Wayland surfaces, the hotspot must
be placed using integers on the logical pixel grid. In practice what
this means is that if the client loads a cursor sprite with the buffer
scale 2, and it's hotspot is not dividable by 2, it will be rounded
down to an integer that can. E.g. a wl_surface with buffer scale 2 and a
cursor image with hotspot coordinate (7, 7) will have the coordinate
(3.5, 3.5) in surface coordinate space, and will in practice be rounded
down to (3, 3) as the hotspot position in wl_pointer only takes
integers.
To not potentially shift by 1 pixel on HiDPI monitors when switching
between wl_surface backend cursor sprites and built-in ones, make the
built in one emulate the restrictions put up by the Wayland protocol.
This also initializes the theme scale of the xcursor sprite instances to
1, as they may not have been set prior to being used, it'll only happen
in response to "prepare-at" signals being emitted prior to rendering.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1092https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1107
We checked that the content size was appropriately painted in the stage,
but didn't take into account that the size of the sampled texture
region, meaning that when stage views were scaled, we'd think that we
would draw a texture scaled, as e.g. a 200x200 sized texture with buffer
scale 2 would have the size 100x100. When stage views were not scaled,
we'd apply a geometry scale meaning it'd end up as 200x200 anyway, thus
pass the check, but when stage views are scaled, it'd still be painted
as a 100x100 shaped texture on the stage, thus failing the
are-we-unscaled test.
Fix this by comparing the transformed paint size with the sampled size,
instead of the paint size again, when checking whether we are being
painted scaled or not. For example, when stage views are scaled, our
200x200 buffer with buffer scale 2, thus content size 100x100 will
transform to a 200x200 paint command, thus passing the test. For
non-scaled stage views, our 200x200 buffer with buffer scale 2 thus
content size 100x100 will also transform into a 200x200 paint command,
and will also pass the check, as the texture sample region is still
200x200.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/804https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1124
A user may have configured an output to be panning, e.g. using xrandr
--output <output> --mode <mode> --panning <size>. Respect this by making
the logical monitor use the panning size, instead of the mode. This
makes e.g. makes the background cover the whole panning size, and panels
etc will cover the whole top of the panned area, instead of just the top
left part covering the monitor if having panned to (0, 0).
No support is added to configuring panning, i.e. a panned monitor
configuration cannot be stored in monitors.xml.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1085
This is so that cogl-trace.h can start using things from cogl-macros.h,
and so that it doesn't leak cogl-config.h into the world, while exposing
it to e.g. gnome-shell so that it can make use of it as well. There is
no practical reason why we shouldn't just include cogl-trace.h via
cogl.h as we do with everything else.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1059
The upper layers (OSDs basically) want to know the monitor that a
tablet is currently assigned to, not the monitor just as configured
through settings.
This broke proper OSD positioning for display-attached tablets since
commit 87858a4e01, as the MetaInputMapper kicks in precisely when
there is no configured monitor for the given device.
Consulting both about the assigned output will make OSDs pop up
again in the right place.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/971
We used to inhibit all pad actions while the OSD is shown, but one we
would actually want to handle are mode switches while the OSD is open.
So it has an opportunity to catch up to the mode switch.
This lets MetaInputSettings reflect the mode switch (eg. when querying
action labels), so the OSD has an opportunity to update the current
actions.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/975
Commit cda9579034 fixed a corner case when setting the initial workspace
state of transient windows, but it still missed a case:
should_be_on_all_workspaces() returns whether the window should be on all
workspaces according to its properties/placement, but it doesn't take
transient relations into account.
That means in case of nested transients, we can still fail the assert:
1. on-all-workspaces toplevel
2. should_be_on_all_workspaces() is TRUE for the first transient's parent,
as the window from (1) has on_all_workspaces_requested == TRUE
3. should_be_on_all_workspaces() is FALSE for the second transient's
parent, as the window from (2) is only on-all-workspace because
of its parent
We can fix this by either using the state from the root ancestor
instead of the direct transient parent, or by using the parent's
on_all_workspaces_state.
The latter is simpler, so go with that.
https://gitlab.gnome.org/GNOME/mutter/issues/1083
This class sits between ClutterInputDevice and the backend implementations,
it will be the despositary of features we need across both backends, but
don't need to offer through Clutter's API.
As a first thing to have there, add a getter for a WacomDevice. This is
something scattered across and somewhat inconsistent (eg. different places
of the code create wacom devices for different device types). Just make it
here for all devices, so users can pick.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1109
Most people just see a harmless warning when applying this setting to
all touchpads (which this patch fixes). But tap[-and-drag] is supposed
to remain enabled for display-less Wacom tablets, despite configuration
changes.
Fix this by using the mapping function, so the setting is forced on for
wacom devices. This happens on a per-device basis, so the warning is
gone too.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1145
This fixes a case that was overlooked in
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1036 - when we
have a geometry scale > 1 and Wayland subsurfaces that have an offset
to their parent surface (which is often the case when the toplevel surface
includes decoration/shadows etc.), we have to add extra offset to their
opaque regions so they match their 'visible' location.
This is necessary as `meta_cullable_cull_out_children` moves the coordinate
system during culling, but does not know about geometry scale.
Also, remove the redundant check for `window_actor` - we only hit this code
path if a `window_actor` culls out its children.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1108
Some tablets like the Cintiq 24HDT have several mode switch buttons
per group. Those are meant to jump straight to a given mode, however
we just handle cycling across modes (as most other tablets have a
single mode switch button per group).
So spice up the mode switch handling so we handle multiple mode
switch buttons, assigning each of them a mode. If the device only
has one mode switch button, we do the old-fashioned cycling.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/970
This error was just logged but not raised. Do as the code comment said
and raise a pipe error at that moment, and for subsequent operations
on the output stream (although none besides close() should be expected
after propagating the error properly).
Related: https://gitlab.gnome.org/GNOME/mutter/issues/1065
When a page flip fails with a certain error code, we've treated this as
a hint that page flipping is broken and we should try to use mode
setting instead.
On some drivers, it seems that this error is also reported when there
was no mode set, which means we'll have no cached mode set to use in the
fallback. The lack of prior mode set tends to happen when we hit a race
when the DRM objects change before we have the time to process a hotplug
event.
Handle the lack a missing mode set in the flip fallback path, with the
assumption that we'll get a hotplug event that'll fix things up for us
eventually.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/917
Both IBus and ClutterInputFocus work in character offsets for the cursor
position in the preedit string. However the zwp_text_input protocol does
define the preedit string cursor offset to be in bytes.
Fixes client bugs in representing the caret within the preedit string,
as we were clearly giving the wrong offset.
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/2517https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1132
We send configure events for state changes e.g. for `appears-focused`,
etc. What we don't want to do is to do this for popup windows, as in
Wayland don't care about this state.
When the focus mode was configured to "sloppy focus" we'd get
`appears-focused` state changes for the popup window only by moving the
mouse cursor around, and while a popup may care about focus, it does not
care about related appearance, as there is no such state in xdg_popup.
What these state changes instead resulted in was absolute window
configuration events, intended for toplevel (xdg_toplevel) windows. In
the end this caused the popup to be positioned aginst at (0, 0) of the
parent window, as the assumptions when the configuration of the popup
was acknowledged is that it had received a relative position window
configuration.
Fix this by simply ignoring any state changes of the window if it is a
popup, meaning we won't send any configuration events intended for
toplevels for state changes. Currently we don't have any way to know
this other than checking whether it has a placement rule. Cleaning up
MetaWindow creation is left to be dealt with another day.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1103https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1122
If the CRTCs the cursor is visible on do not share a common scale
and transform, we can't use the cursor hardware plane as we only have one.
We therefore fall back to software / gl cursor.
The check for that currently happens after we tried to upload the cursor image
to the hardware plane though.
This is made worse by the fact that in the scaling step, where we scale the
cursor image to the desired size, until now we expected a valid common scale -
otherwise scaling the image by an uninitialized float.
Make sure we bail out early during the scale/upload step if we don't have common
scales and transforms - to avoid that bug and save some unnecessary work.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1125
Make sure it is only the special modifier (hardcoded to 1 currently)
which is being pressed (not counting locked modifiers) before notifying
that the special modifier is pressed, as we are interested in it being
pressed alone and not in combination with other modifier keys.
This helps in two ways:
- Pressing alt, then ctrl, then releasing both won't trigger the locate
pointer action.
- Pressing alt, then ctrl, then down/up to switch workspace won't interpret
the last up/down keypress as an additional key on top of the special ctrl
modifier, thus won't be forwarded down to the focused client in the last
second.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/812https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1014
If you first press a key that triggers the "special modifier key" paths
(ctrl, super), and then press another key that doesn't match (yet?) any
keybindings (eg. ctrl+alt, super+x), the second key press goes twice
through process_event(), once in the processing of this so far special
combination and another while we let the event through.
In order to keep things consistent, handle it differently depending on
whether we are a wayland compositor or not. For X11, consider the event
handled after the call to process_event() in process_special_modifier_key().
For Wayland, as XIAllowEvents is not the mechanism that allows clients see
the key event, we can just fall through the regular paths, without this
special handling.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1014
There is a race where an output can be used as a fullscreen target, but
it has already been removed due to a hotplug. Handle this gracefully by
ignoring said output in such situations.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1120
To keep consistent and avoid confusion, rename the function:
`meta_window_x11_buffer_rect_to_frame_rect()`
to:
`meta_window_x11_surface_rect_to_frame_rect()`
As this function doesn't deal with the `window->buffer_rect` at all.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
The code in `build_and_scan_frame_mask` predates the introduction of the
`MetaShapedTexture` API to get the texture width hand height.
Use the new `meta_shaped_texture_get_width/height` API instead of using
the CoGL paint texture.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
For X11 clients running on Wayland, the actual texture is set by
Xwayland.
The shape, input and opaque regions, however are driven by X11
properties meaning that those may come at a different time than the
actual update of the content.
This results in black areas being visible at times on resize with
Xwayland clients.
To make sure we update all the regions at the same time the buffer is
updated, update the shape, input and opaque regions when the texture is
committed from when the Xwayland surface state is synchronized.
That fixes the remaining black areas being sometimes visible when
resizing client-side decorations windows on Xwayland.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/1007https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
For X11 clients running on Xwayland, the opaque, input and shape regions
are processed from different properties and may occur at a different
time, before the actual buffer is eventually committed by Xwayland.
Add a new API `update_regions` to window actor to trigger the update of
those regions when needed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
Commit 7dbb4bc3 cached the client area when the client was frozen.
This is not sufficient though, because the buffer size might still be
lagging waiting for the buffer from Xwayland to be committed.
So instead of caching the client size from the expected size, deduce the
client area rectangle from the surface size, like we did for the frame
bounds in commit 1ce933e2.
This partly reverts commit 7dbb4bc3 - "window-actor/x11: Cache the
client area"
https://gitlab.gnome.org/GNOME/mutter/issues/1007https://gitlab.gnome.org/GNOME/mutter/merge_requests/1091
Listen for GPU hotplug events to initialize their cursor support.
This fixes one reason for why DisplayLink devices may not be using a hardware
cursor. Particularly, when a DisplayLink device is hotplugged for the first
time such that EVDI creates a new DRM device node after gnome-shell has already
started, we used to forget to initialize the cursor support.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1097
Extract the code to initialize a single GPU cursor support into its own
function. The new function will be used by GPU hotplug in the future.
This is a pure refactoring without any behavioral changes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1097
For every stream src, we created and attached a GSource. Upon stream
src destruction, we g_source_destroy():ed the GSource. What
g_source_destroy() does, hawever, is not really "destroy" it but only
detaches it from the main context removing the reference the context had
added for it via g_source_attach(). This caused the GSource to leak,
although in a detached state, as the reference taken on creation was
still held.
Fix this by also removing our own reference to it when finalizing.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1106
PipeWire will be unable to dequeue a buffer if all are already busy.
This can happen for valid reasons, e.g. the stream consumer not being
fast enough, so don't complain in the journal if it happens.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1115
While we will always have cursor planes, as we'll currently create fake
ones when real ones are missing (See #1058), eventually we will run into
situations where we can't create fake ones, for example for atomic KMS
drivers that don't advertise any cursor planes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1079
If we don't force the placement, we enter the constrain machinery with
the position (0, 0), meaning we always get the "current work area" setup
to correspond to whatever logical monitor was at that position.
Avoid this by doing the same as "meta_window_force_placement()" and set
"window->calc_placement" to TRUE while move-resizing, causing the
move-resize to first calculate the initial position.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/1098https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1110
This commit completes the implementation of `xdg_wm_base` version 3,
which introduces support for synchronized implicit and explicit popup
repositioning.
Explicit repositioning works by the client providing a new
`xdg_positioner` object via a new request `xdg_popup.reposition`. If the
repositioning is done in combination with the parent itself being
reconfigured, the to be committed state of the parent is provided by the
client via the `xdg_positioner` object, using
`xdg_positioner.set__parent_configure`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
This sets the `is_reactive` flag on the window placement rules, causing
the popups to be reconfigured as they are affected by environmental
changes, such as the parent moving in a way making the popup partially
offscreen.
As with synchronization, the implementation is dormant, as the
version of the advertised global isn't bumped yet, as the new protocol
version is not yet fully implemented.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
This commits adds support on the MetaWindow and constraints engine side
for asynchronously repositioning a window with a placement rule, either
due to environmental changes (e.g. parent moved) or explicitly done so
via `meta_window_update_placement_rule()`.
This is so far unused, as placement rules where this functionality is
triggered are not yet constructed by the xdg-shell implementation, and
no users of `meta_window_update_placement_rule()` exists yet.
To summarize, it works by making it possible to produce placement rules
with the parent rectangle a window should be placed against, while
creating a pending configuration that is not applied until acknowledged
by the client using the xdg-shell configure/ack_configure mechanisms.
An "temporary" constrain result is added to deal with situations
where the client window *must* move immediately even though it has not yet
acknowledged a new configuration that was sent. This happens for example
when the parent window is moved, causing the popup window to change its
relative position e.g. because it ended up partially off-screen. In this
situation, the temporary position corresponds to the result of the
movement of the parent, while the pending (asynchronously configured)
position is the relative one given the new constraining result.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
MetaGravity is an enum, where the values match the X11 macros used for
gravity, with the exception that `ForgetGravity` was renamed
`META_GRAVITY_NONE` to have less of a obscure name.
The motivation for this is to rely less on libX11 data types and macros
in generic code.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
A placement rule placed window positions itself relative to its parent,
thus converting between relative coordinates to absolute coordinates,
then back to relative coordinates implies unwanted restrictions for
example when the absolute coordinate should not be calculated againts
the current parent window position.
Deal with this by keeping track of the relative position all the way
from the constraining engine to the move-resize window implementation.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
To organize things a bit better, put the fields related to the placement
rule state in its own anonymous struct inside MetaWindow. While at it,
rename the somewhat oddly named variable that in practice means the
current relative window position.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
After popup placement rules have gone through the constraints engine has
ended up resulting in an actual move, pass the window configuration down
the path using relative coordinates, as that is what the next layer
(xdg-shell implementation) actually cares about.
In the future, this will also be helpful when the configured position is
not against the current state of the parent.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
A placement rule is always about placing a window relative to its
parent. In order to eventually place it against predicted future parent
positions, make the placement rule processing output relative
coordinates, having the caller deal with turning them into absolute.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
meta_window_wayland_finish_move_resize() inhibited window moves to be
finished if there was a resize grab active at the time, in order to
handle window resizing. Change this to only affect the grabbed window
itself, so that e.g. a popup can be positioned according to a pending
configuration while there is an active resize grab.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/705
This is made a signal, so the upper layers (read: gnome-shell) may
decide what services to spawn. The signal argument contains a task
that will resume MetaX11Display startup after it is returned upon.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/945
This is used by GDK and the X11 bits, but may also be used for
other initialization services we might need to run along with
Xwayland initialization.
However, as the -initfd argument in Xwayland is a fairly new
feature, add some meson build-time checks so that the feature
is handled transparently while allowing to explicitly set/unset
it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/945
This shape region culling was wrongly implemented in f5a28aa9, as it
does not take frame offsets into account, and is also redundant, as
we already set the opaque region of the underlying surface accordingly.
The other parts were implemented in ac7aa114, the reason given in
the commit message:
```
Wayland clients do this through the opaque region in the surface
actor. However X11 clients were considered fully transparent for
culling purposes, which may result in mutter painting other bits
of the background or other windows that will be painted over in
reality.
```
is wrong though - culling on X11 actors works just fine and did only
not work in Wayland sessions because of a bug that got fixed in
19814497.
In conclusion the whole part appears to be redundand and some testing
done suggests the same. Drop it.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1082
If a opaque region is explicitly set we should not consider the surface
opaque, as that implies e.g. a shape region is set.
If no opque region is set but the texture does not have an alpha channel,
we can savely cull it out.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1082
We want sysprof's exact datadir for compatability with
platforms where software is installed into their own
individual immutable prefix's. Such that, mutter's prefix will
never equate to sysprof's. This depends on a MR in sysprof [0]
which adds datadir to its pkgconfig files, as these files will always
have the proper path we want.
This adds version a constraint on sysprof_dep, as datadir was added to
the .pc in this version.
[0]: https://gitlab.gnome.org/GNOME/sysprof/merge_requests/19https://gitlab.gnome.org/GNOME/mutter/merge_requests/957
Given that on Wayland we are pretty much guaranteed to finish MetaX11Display
setup after the MetaCompositor is enabled, we may drop the
meta_compositor_manage() x11 initialization bits, and move them into the
MetaX11Compositor subclass where it's actually needed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
We artificially made Xwayland initialization synchronous, as we used
to rely on MetaX11Display and other bits during meta_display_open().
With support for Xwayland on demand and --no-x11, this is certainly
not the case.
So drop the main loop surrounding Xwayland initialization, and turn
it into an async operation called from meta_display_init_x11(). This
function is turned then into the high-level entry point that will
get you from no X server to having a MetaX11Display.
The role of meta_init() in Xwayland initialization is thus reduced
to setting up the sockets. Notably no processes are spawned from here,
deferring that till there is a MetaDisplay to poke.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
This ATM completes the task right away, but we will want to do
further things here that are asynchronous in nature, so prepare
for this operation being async.
Since the X11 backend doesn't really need this, make it go on
the fast lane and open the MetaX11Display right away, the case
of mandatory Xwayland on a wayland session is now handled
separately.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
With Xwayland initialization going async, these errors will seep
into the parts controlled by g_test*(), resulting in the harmless
errors about DBus names not acquired turned fatal.
Set an error log handler, and specifically ignore those.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
It might not be available right on initialization time if X11 is started
asynchronously. As this is a requirement for our tests, ensure it is there
before proceeding with the test.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
This used to be set on meta_compositor_manage(), but only if there is a
MetaX11Display. Given meta_display_init_x11() is Wayland only, and we can
always assume compositing to be enabled, just have it invariably set after
the X server is up.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/944
Even though cogl_framebuffer_flush() was supposed to be enough,
it ends up creating streams with odd visual glitches that look
very much like unfinished frames.
Switch back to cogl_framebuffer_finish(), which is admittedly
an overkill, but it's what works for now. There is anedoctal
evidence showing it doesn't incur in worse performance.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1086
