Surface buffers are created with meta_drm_buffer_new_acquire(), taking a
gbm_surface acquiring the gbm itself, and meta_drm_buffer_new_take()
that takes over ownership of a passed gbm_bo.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
Currently a buffer use count always reaches zero before it is replaced.
This is due to the fact that at the point a new buffer is attached, the
last potential user releases it (the stage) since the currently
displayed frame has a composited copy of the buffer.
This may however change, if a buffer is scanned out directly, meaning it
should not be released until the page flip callback is invoked.
Prepare for this by making the buffer reference a heap allocated struct,
enabling us to keep a pointer to it longer than the buffer is attached.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
The CRTC level transform (not necessarily the hw transform) must be
taken into account when calculating the position of the CRTC in the
stage coordinate space, when placing the hw cursor, otherwise we'll
place the cursor as if the monitor was not rotated.
This wasn't a problem in the past, as with rotation, we always used the
OpenGL cursor, so the issue newer showed.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199
The port to per CRTC views was incomplete; we still used the logical
monitor layout as the stage view layout, while still using one view per
CRTC.
This worked fine for most cases, e.g. regular monitors, tiled or
non-tiled, transformed or non-transformed. Where it broke, however, was
when a monitor consists of multiple CRTCs. We already have the layout a
CRTC corresponds to on the stage kept with the CRTC metadata, so use
this directly.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1170https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199`
The CRTC level transform (i.e. not necessarily the one set on the
hardware) is what is relevant for calculating the layout the CRTC will
have on the stage, so only use the one that can be handled by the
hardware for the CRTC assignment.
This makes the CRTC layout valid for tiled monitors.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199
Previously the tile coordinate was used to offset a CRTC scanout
coordinate within a larger framebuffer. Since 3.36 we're always
scanning out from (0, 0) as we always have one framebuffer per CRTC; we
instead use the tile coordinate to calculate the coordinate the tile has
in the stage view. Adapt calculation to fulfil this promise instead of
the old one.
This also corrects the tiled custom monitor test case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1199
test_client_new might return early if conditions are not met, leaving some
allocated data around without freeing it.
Since we're not using the client before, there's no need to initialize it early
and just initialize it when it's going to be returned.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/1195
Dereference the loop variable rather than the original list head. This
fixes a regression introduced in 4413b86a3 ("backends: Replace
ClutterDeviceManager usage in favor of ClutterSeat", 2019-10-04) which
broke button scrolling with trackballs.
Closes:https://gitlab.gnome.org/GNOME/mutter/-/issues/1120
Most visible with xwayland-on-demand, at the time of setting things up
for X11 selections, we don't forward the current state. This makes the
first started X11 app oblivious to eg. the current clipboard.
Syncing selections up at the time of initializing the X11 selection
stuff ensures that doesn't happen.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1186
click_action_query_long_press() can potentially schedule more than
one timeout, since it doesn't clear any already-existing timeout.
Make sure to clear the long press timeout before scheduling a new
one.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1188
Like the click action, it makes sense to cancel the ongoing gesture
when the action is disabled. Do so by overriding our new friend,
ClutterActorMeta.set_enabled, and canceling the gesture when disabling
the action.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1188
ClutterClickAction, like other actions, can potentially be disabled
at any time (that is not during painting). When that happens with
ClutterClickAction, it must release all timeouts and disconnect from
the stage's 'capture-event'.
Override ClutterActorMeta.set_enabled and release the click action
when the action is being disabled.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1188
Various subclasses of ClutterActorMeta need to reacto to being
disabled. Right now, however, the only way to do that is by
overriding GObject's 'notify' vfunc, and doing a string comparison
against "enabled".
Add a new vfunc to ClutterActorMeta in order to replace this bad
practice.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1187
On VT switch, the devices are removed, which means for Wayland disabling
the keyboard.
When the keyboard is disabled, the associated `xkb_state` is freed and
recreated whenever the keyboard is re-enabled when switching back to the
compositor VT.
That means the `xkb_state` for Wayland is lost whereas the same for
clutter is kept, which causes to a discrepancy with locked modifiers on
VT switch.
To avoid that issue, preserve the XKB info only to dispose it when the
keyboard is eventually finalized.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/344https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1185
In the unlikely case we have multiple rectangles in our selection
(selection spanning several lines, or across LTR/RTL bounds), paint each
of those instead of setting a CoglPath-based clip/fill.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1126
The motion events of tablets for example need to be mapped on the
selected screen area if the input device is configured to use only a
part of the active logical monitor.
To achieve this behavior each motion event is transformed using the
transformation matrix set for the input device.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1118
At some point we crossed the streams... In a short timespan we had
1f00aba92c merged, pushing WacomDevice to a common parent object,
and dcaa45fc0c implementing device grouping for X11.
The latter did not rely on the former, and just happened to
merge/compile without issues, but would promptly trigger a crash
whenever the API would be used.
Drop all traces of the WacomDevice internal to MetaInputDeviceX11.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1183
With the introduction of "shallow" relayouts, we are now able to enter
allocation cycles not only at the stage but also deeper down the
hierarchy if we know an actors allocation isn't affected by its children
since the NO_LAYOUT flag is set.
Now that means when queuing relayouts it's possible that
`priv->needs_allocation` gets set to TRUE for some actors down the
hierarchy, but not for actors higher up in the hierarchy. An actor tree
where that happens could look like that:
stage -> container -> container2 (NO_LAYOUT) -> textActor
With that tree, if the "textActor" queues a relayout, "container2" will
be added to the relayout hashtable of the stage and the actors "stage"
and "container" will have `priv->needs_allocation` set to FALSE.
Now if another relayout on the stage actor is queued,
`clutter_stage_queue_actor_relayout()` currently removes all the other
hashtable entries in favour of the stage entry, (wrongly) assuming that
will allocate everything. It doesn't allocate everything because in the
example above "container" has `priv->needs_allocation` set to FALSE,
which makes clutter_actor_allocate() return early before allocating its
children, so in the end "container2" will never get a new allocation.
To fix this, stop flushing the relayout hashtable when queuing a
stage-relayout and still add new entries to the hashtable if a stage
relayout is already queued to make sure we still go through all the
previously queued "shallow" relayouts. That shouldn't hurt performance,
too, because as soon as an actor got allocated once, it doesn't need an
allocation anymore and should bail out in clutter_actor_allocate() as
long as it's absolute position didn't change.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2538https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1173
We have branched now, time for a shiny new CI image.
Update the Dockerfile to:
- switch to F32
- use a single shared copr
- drop dependencies that are now covered by builddep
- do not include weak deps
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1176
Currently we check whether a window is alive everytime it's focused.
This means that an application that doesn't respond to the check-alive
event during startup always showing the "application froze" dialog,
without the user ever trying to interact with it.
An example where this tends to to happen is with games, and for this
particular scenario, it's purely an annoyance, as I never tried to
interact with the game window in the first place, so I don't care that
it's not responding - it's loading.
To avoid these unnecessary particular "app-is-frozen" popups, remove the
alive check from the focus function, and instead move it back to the
"meta_window_activate_full()" call. To also trigger it slightly more
often, also add it to the path that triggers the window focus when a
user actively clicks on the window.
This means that we currently check whether a window is alive on:
* Any time the window is activated. This means e.g. alt-tab or
selecting the window in the overview.
* The user clicks on the window.
Note that the second only works for an already focused window on
Wayland, as on X11, we don't refocus it. This particular case isn't
changed with this commit, as we didn't call meta_window_focus() to begin
with here.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1182
This fixes an issue where a non-maximized screen casted window would be
stretched to fill the whole screen cast stream, instead of just the crop
that corresponds to the current window size.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1174
It isn't immediately obvious that this is impossible, because there's some
"action at a distance" going on with framebuffers that have their size
set lazily, after their textures get allocated; so let's make this a
critical warning rather than crashing.
In particular, this works around a crash when gnome-shell tries to blur a
background that hasn't yet had any space allocated for it - which it seems
is really an actor layout bug, but more robustness seems good to have.
Workaround for <https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2538>.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1172
Signed-off-by: Simon McVittie <smcv@debian.org>
A texture with no pixels isn't a useful thing to have, and breaks
assumptions elsewhere. For example, CoglFramebuffer assumes that after
a texture has been allocated, it will have width and height both greater
than 0.
In particular, this works around a crash when gnome-shell tries to blur a
background that hasn't yet had any space allocated for it - which it seems
is really an actor layout bug, but more robustness seems good to have.
Workaround for <https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2538>.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1172
Signed-off-by: Simon McVittie <smcv@debian.org>
Disabling a click action after a button-press but before a
button-release is captured makes ClutterClickAction connect to
captured-event and never disconnect.
This change fixes it by making sure the captured-event is only
processed if the action is still enabled, otherwise releasing
the action (reset state) and propagating the event.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1170
