When windows are tiled, it improves the interaction with
them when they have a set of snapping edges relative to
the monitor. For example, when there's a document editor
and a PDF file opened, I might want to rescale the former
to 2/3 of the screen and the latter to 1/3.
These snapping sections are not really tied to any other
window, and only depend on the current work area of the
window. Thus, it is not necessary to adapt the current
snapping edge detection algorithm.
This patch adds the necessary code in edge-resistance.c
to special-case tiled windows and allow them to cover
1/4, 1/3 and 1/2 (horizontally) of the screen. These
values are hardcoded.
https://bugzilla.gnome.org/show_bug.cgi?id=645153
After the introduction of the possibility to resize tiled windows,
it is a sensible decision to make windows aware of their tiling
match. A tiling match is another window that is tiled in such a
way that is the complement of the current window.
The newly introduced behavior attepts to make tiling as smooth as
possible, with the following rules:
* Windows now compute their tile match when tiling and, if there's
a match, they automatically complement the sibling's width.
* Resizing a window with a sibling automatically resizes the sibling
too to be the complement of the window's width.
* It is not possible to resize below windows' minimum widths.
https://bugzilla.gnome.org/show_bug.cgi?id=645153
Now that tiled windows are resizable, the user may grow a tiled
windows until it covers the entire work area. As this makes the
window state mostly indistinguishable from maximization, avoid
subtle differences by properly maximizing the window in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=645153
Currently tiled windows are not resizable and their size is fixed
to half the screen width. Adjust the code to work with fractions
other than half, and allow users to adjust the split by dragging
the window edge that is not constrained by a monitor edge.
Follow-up patches will improve on that by resizing neighboring
tiled windows by a shared edge, and making the functionality
available to client-side decorated windows implementing the
new edge constraints protocol.
Now that the preview tile mode has been split from the window's
tile_mode property, it is much more natural to pass the requested
tile_mode to the tile() function instead of setting it externally
and calling the function to apply the state.
The existing semantics of the tile_mode property are terribly confusing,
as it depends on some other property whether it represents the requested
or current mode. Clear this up by just using separate variables for the
two. As it is unlikely that we will ever support more than one tile
preview, we can track the requested mode globally instead of adding
another per-window variable.
https://bugzilla.gnome.org/show_bug.cgi?id=645153
update_num_workspaces() is a no-op when the number of workspaces
did not actually change. That is fine, except that we still want
to initialize the _NET_NUMBER_OF_DESKTOPS hint on startup to not
break components like nautilus-desktop that rely on it.
https://bugzilla.gnome.org/show_bug.cgi?id=760651
Automatic maximization is done when a window is almost the size of the
work area of a monitor. This makes no sense to try when there is no
monitor available, so skip trying to do this when headless.
https://bugzilla.gnome.org/show_bug.cgi?id=787637
When we are headless, treat this as if the window is always not monitor
sized. This might cause windows to temporarly become redirected while
being headless, but this is harmless as when a new monitor is
connected, we'll recalculate weather it should be redirected or not.
https://bugzilla.gnome.org/show_bug.cgi?id=787637
Check that configurations where monitors are disabled are properly
used. Also test that old configurations with explicitly disabled
outputs are migrated properly.
https://bugzilla.gnome.org/show_bug.cgi?id=787629
When saving and restoring monitor configurations, we must take disabled
monitors into account, as otherwise one cannot store/restore a
configuration where one or more monitors are explicitly disabled. Make
this possible by adding a <disabled> element to the <configure> element
which lists the monitors that are explicitly disabled. These ones are
included when generating the configuration key, meaning they'll be
picked up correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=787629
When dynamic workspaces are used, we pick up an existing NUMBER_OF_DESKTOP
hint in meta_screen_init_workspaces() to properly restore workspaces
on restart. Unconditionally setting that hint to 1 *before* reading it
breaks that, and we end up shifting all windows to the first workspace.
This reverts commit 8532b10290.
https://bugzilla.gnome.org/show_bug.cgi?id=760651
Also adds a soft assert to meta_window_is_on_primary_monitor() to make
it easier to spot when callers might want to handle headless
in a certain way.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
The XIQueryDevice function used by device_query_area can return a NULL
pointer and set n_devices to a negative number in some cases. We add
additional checks to prevent a segfault.
https://bugzilla.gnome.org/show_bug.cgi?id=787649
For now we abuse of meta_window_get_flatpak_id not to break the APIs,
so that it's working seamlessly in gnone shell too.
Rename flatpak_id to sandboxed_app_id internally to get prepared to the future
API.
https://bugzilla.gnome.org/show_bug.cgi?id=788217
If a non-latin based keyboard layout is active, for example Cyrillic,
keybindings won't work unless we resolve the bound keysyms on a
secondary latin based layout. So, to make keybindings work on non-latin
based layouts, detect if a keymap doesn't have all of the basic latin
letters (a-z) and resolve from an additional US layout as well.
https://bugzilla.gnome.org/show_bug.cgi?id=787016
Add the infrastructure to resolve keybinding symbols from multiple
layouts. It is still unused, but will be, when the primary layout does
not have the required latin keysyms in it.
https://bugzilla.gnome.org/show_bug.cgi?id=787016
When rotating 90/270 degrees we need to swap width and height. This fixes
the screen going black and the following errors showing in the journal:
gnome-shell[1097]: Failed to set CRTC mode 800x1280: No space left on device
gnome-shell[1097]: Failed to flip: Device or resource busy
gnome-shell[1097]: Failed to set CRTC mode 800x1280: No space left on device
gnome-shell[1097]: Failed to set CRTC mode 800x1280: No space left on device
When rotating a tablet with accelerometer 90/270 degrees.
https://bugzilla.gnome.org/show_bug.cgi?id=787836
Make sure to call set_number_of_spaces_hint in meta_screen_new.
_NET_NUMBER_OF_DESKTOPS is required by nautilus-desktop to correctly
get the desktop workarea.
https://bugzilla.gnome.org/show_bug.cgi?id=760651
We currently have a hard coded limit on logical monitor sizes, meant
for filtering out monitor scales that would result in awkward desktop
sizes. This has the side effect of also disqualifying scale 1 for
resolutions that themself are lower than the mentioned limit. To avoid
listing no supported scales, always add the fallback scale 1 if no
other was added.
https://bugzilla.gnome.org/show_bug.cgi?id=787477
When we update state, we might not have set the current config yet (for
example if the Xrandr assignment didn't change), so pass the monitors
config we should derive from instead of fetching it from the monitor
config manager.
https://bugzilla.gnome.org/show_bug.cgi?id=787477
We currently only save synchronously when running the test suite, but
should still not leak the generated config buffer. We also created the
cancellable but never used it if we saved synchronously, so lets stop
doing that too.
https://bugzilla.gnome.org/show_bug.cgi?id=787477
The cancellable should only be cleared if we weren't cancelled, as if
we were cancelled, the path cancelling have already cleared the
cancellable.
https://bugzilla.gnome.org/show_bug.cgi?id=787477
We cleaned up an unused monitor config list, but what we should do is
clear up the logical monitor config list. This commit does that, as
well as removes the unused monitor config list.
We have not enough control over the sources of the refresh rate
float variable to make == comparisons reliable, add some room
when comparing these.
https://bugzilla.gnome.org/show_bug.cgi?id=787668
We would free the shortcut inhibit data only when the client destroys
its request, which is not the case when the clients itself is
destroyed, leading to a leak of the shortcut inhibit data.
Free the data on resource destruction instead, and simply destroy the
resource on destroy request.
https://bugzilla.gnome.org/show_bug.cgi?id=787568
On Wayland, the grab()/ungrab() in gtk+/gdk are wired to the shortcut
inhibitor mechanism, which in turn shows the dialog, which can take
focus away from the client window when the dialog is shown.
If the client issues an ungrab() when the keyboard focus is lost, we
would hide the dialog, causing the keyboard focus to be returned to the
client surface, which in turn would issue a new grab(), so forth and so
on, causing a continuous show/hide of the shortcut inhibitor dialog.
To avoid this issue, keep the dialog around even if the shortcut inhibit
is canceled by the client, so that the user is forced to make a choice
that we can reuse on the next request without showing the dialog again.
Instead of hiding the dialog when the shortcut inhibitor is destroyed by
the client, we simply mark the request as canceled and do not apply the
user's choice.
https://bugzilla.gnome.org/show_bug.cgi?id=787568
The brightness is about the vignette. Add a 'vignette_' prefix in order
to give more context. Keep the property name as it is, doing so we don't
break any plugin (e.g., gnome-shell).
https://bugzilla.gnome.org/show_bug.cgi?id=786618
Add the word 'vignette' in order to give some context on what the
snippets do. This will be useful later when we land other snippets
for the gradient effect.
https://bugzilla.gnome.org/show_bug.cgi?id=786618
The reverted commit seems to cause
https://bugzilla.gnome.org/show_bug.cgi?id=787240 for some reason. Lets
be safe and revert it for now, as the code freeze is just around the
corner.
This partly (it doesn't reintroduce a whitespace issue) reverts commit
dbc63430d8.
When cleaning up the display name string management, the display name
string retrieved from libwayland-server was also passed to free() on
clean up. This is invalid as the display name string ownership is not
transferred to us. Fix this by strdup:ing the string before saving it.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
Give clients (such as Xwayland) a chance to bind the wl_output global
before we continue, otherwise there is an significant risk that mutter
won't see the bind request until after the next hot plug which might
have destroyed the global object.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
This avoids updating state (such as position, size etc) when going
headless. Eventually, when non-headless, things will be updated again,
and not until then will we be able to update to a valid state.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
In order to give the clients the best chance to bind the wl_output
before we later remove it (for example on fast hot plugs or in the test
suite), flush the client sockets after creating the global.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
The foreach CRTC monitor mode helper incorrectly iterated over outputs
without CRTC when non-tiled modes were set on tiled monitors. This was
not expected by callers, so fix the helper to only iterate over active
outputs (that has or should have a CRTC).
The test cases uses the incorrect behaviour of the foreach CRTC helper
to check that the disabled outputs mode are set to NULL, so add a
foreach output helper and change the tests to use that instead.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
If there are no active logical monitors, don't try to dereference a
NULL one to get a preferred output winsys id. Instead just set an
invalid one.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
When headless, we don't have any logical monitors to derive a screen
size from, but we can't set it to empty as that will cause issues with
the clutter stage, UI widget layout and other things. To avoid such
issues, just fall back to a 640 x 480 screen size when headless.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
Due to rounding issues, we can't assume a floating point calculation
will end up on an integer, even if we got the factor from the reverse
calculation. Thus, to avoid casting away values like N.999... to N,
when they should really be N+1, round the resulting floating point
calculation before casting it to int.
This fixes an issue where using the scale ~1.739 on a 1920x1080 mode
resulted in error when setting the mode, as the calculated size of the
framebuffer was only 1919x1080.
https://bugzilla.gnome.org/show_bug.cgi?id=786918
When a screen cast session is stand-alone, i.e. not created given a
remote desktop session managing it, allow calling the Start/Stop
methods to start and stop it.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
As of commit 5f5ef3de2cdc816dab82cb7eb5d7171bee0ad2c5 in pipewire the
stream creator can find out the node ID of the stream it created.
So instead of using a special purpose entry to the info property box to
let the application discover stream by monitoring added nodes searching
for the given special purpose entry, just pass the node directly.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
When the PipeWire context or stream ends up in an error state, signal
that the source has closed. This then triggers the stream and finally
the session to be closed too.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
This commit adds basic screen casting and remote desktoping
functionalty. This works by exposing two D-Bus API services:
org.gnome.Mutter.ScreenCast and org.gnome.Mutter.RemoteDesktop.
The remote desktop API is used to create remote desktop sessions. For
each session, a D-Bus object is created, and an application can manage
the session by sending messages to the session object. A remote desktop
session the user to emit input events using the D-Bus methods on the
session object. To get framebuffer content, the application should
create an associated screen cast session.
The screen cast API is used to create screen cast sessions. One can so
far either create stand-alone screen cast sessions, or a screen cast
session associated with a remote desktop session. A remote desktop
associated screen cast session is managed by the remote desktop session.
So far only remote desktop managed screen cast sessions are implemented.
Each screen cast session may have one or more streams. A screen cast
stream is a stream of buffers of some part of the compositor content.
So far API exists for creating streams of monitors and windows, but
only monitor streams are implemented.
When a screen cast session is started, the one PipeWire stream is
created for each screen cast stream created for the session. When this
has happened, a PipeWireStreamAdded signal is emitted on the stream
object, passing a unique identifier. The application may use this
identifier to find the associated stream being advertised by the
PipeWire daemon.
The remote desktop and screen cast functionality must be explicitly be
enabled at ./configure time by passing --enable-remote-desktop to
./configure. Doing this will build both screen cast and remote desktop
support.
To actually enable the screen casting and remote desktop, the user must
enable the experimental feature. See
org.gnome.mutter.experimental-features.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
Add MetaFraction, which consists of two integers, the numerator an the
denominator. The utility function to convert a double to a MetaFraction
comes from gstreamer.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
When monitors changed, previous monitor instances are defunct, and any
reference holder should drop its reference. Sometimes they will want to
continue having a reference to the same monitor, so add this function
to make it possible to find it.
Currently the output and crtc references are invalid, as they are not
yet reference counted, so this can only look at cached fields.
https://bugzilla.gnome.org/show_bug.cgi?id=784199
Apparently my understanding of Cogl pixel formats, or at least their
use, was somewhat shaky.
Un-invert the inversion of the DRM FourCC -> Cogl pixel format mapping
when creating dmabufs from clients, fixing inverted channel ordering
seen from GL clients, e.g. gold highlights in gtk4-demo when using the
GSK GL backend when they should be blue.
https://bugzilla.gnome.org/show_bug.cgi?id=786677
Trying to unilaterally require eglGetPlatformDisplayEXT causes problems in
scenarios where this method is not available. Besides, this should only be
required on Wayland, so we can stop requiring it always and simply let the
eglGetPlatformDisplay() function error accordingly when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=786619
The HW cursor plane can't do any transformations, and as we still don't
pre-transform any buffer before uploading to the cursor plane, we must
disable the HW cursor when a logical monitor is transformed.
This worked previously because the transform of a MetaCrtc did not
correspond to the transform of a CRTC, but the transform of the logical
monitor the CRTC was assigned to.
https://bugzilla.gnome.org/show_bug.cgi?id=786023
When another D-Bus call that just tries to verify a configuration is
made, don't cancel any active monitor configuration dialog, as doing so
would effectively confirm queried configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=786023
When resolving what keycodes a key binding resolves to, only look up
key codes from the current layout group. Without this, unwanted
overlaps may occur. For example when a keymap has both a dvorak and a
qwerty layout on different layout groups, one keybinding may be bound
on multiple keys, arbitrarily "shadowing" another.
https://bugzilla.gnome.org/show_bug.cgi?id=786408
Add API to get the layout group (layout index) currently active. In the
native backend this is done by fetching the state directly from the
evdev backend; on X11 this works by listening for XkbStateNotify
events, caching the layout group value.
https://bugzilla.gnome.org/show_bug.cgi?id=786408
Don't wait for clutter to initialize for connecting to X11; do it when
constructing the backend instance. This way we can later depend on
having an X11 connection earlier during initialization.
https://bugzilla.gnome.org/show_bug.cgi?id=786408
When opening a laptop lid, one will likely want to restore the
configuration one had prior to closing it, so when ensuring monitor
configuration, first try to see if the previously set configuration is
both complete (all connected monitors are configured) and applicable
(it is a valid configuration) and only try to generate a new from
scratch if that failed.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
In order to go back in monitor configurations, save them to a history.
The history is implemented as a max 3 element long queue, where newly
set configurations are pushed to the head, and old are popped from the
tail.
The difference between using a single previous config reference and a
queue is that we can now remember the configuration used prior to a
D-Bus triggered configuration when the user discarded the configuration.
This will later be used to restore a previous configuration when a
laptop lid is opened.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
So far some basic testing, including:
* Test that the migrated configuration is applicable
* Test that a monitors.xml with multiple configurations are translated
* Test rotation
* Test tiled monitor discovery (well, test a made up tiled monitor
configuration since I don't have a real one)
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This commit changes the new configuration system to use monitors.xml
instead of monitors-experimental.xml. When starting up and the
monitors.xml file is loaded, if a legacy monitors.xml file is
discovered (it has the version number 1), an attempt is made to migrate
the stored configuration onto the new system.
This is done in two steps:
1) Parsing and translation of the old configuration. This works by
parsing file using the mostly the old parser, but then translating the
resulting configuration structs into the new configuration system. As
the legacy configuration system doesn't carry over some state (such as
tiling and scale used), some things are not available. For tiling, the
migration paths makes an attempt to discover tiled monitors by
comparing EDID data, and guessing what the main tile is. Determination
of the scale of a migrated configuration is postponed until the
configuration is actually applied. This works by flagging the
configuration as 'migrated'.
2) Finishing the migration when applying. When a configuration with the
'migrated' flag is retrieved from the configuration store, the final
step of the migration is taken place. This involves calculating the
preferred scale given the mode configured, while making sure this
doesn't result in any overlapping logical monitor regions etc.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The zero-initialized winsys id was incorrectly used as the key to find
the old output to base active/primary state from, which would never
succeed unless the winsys id happened to be 0. Fix this by using the
winsys id that will be used, i.e. the connector id.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The 'normal' transform has the value 0, so the g_warn_if_fail()
expression failed. Correct it so that it doesn't complain when no
transform is checked.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The problem is that libinput offers the possibility to not enabled
dragging when tap-to-click is enabled but mutter doesn't. For people who
have a sensitive touchpad and who like tap-to-click option, dragging is
launched even when you don't want it : for example, when you select a
folder, most of the time the folder is dragging whereas just selected or
when you want to select some lines of a text file, several lines are
moved as a cut-paste which is not expected and erase datas.
To fix it, you need to have the possibility to desactivate the drag
option when you use tap-to-click in mutter. Because it's already a
specification of libinput, it remains to add it to mutter.
Implementation with X11 is added too.
https://bugzilla.gnome.org/show_bug.cgi?id=775755
The meta_wayland_surface_hide_inhibit_shortcuts_dialog() function
disconnected the "destroy" handler, but we'd still be listening on
response events. Change this to just hide the dialog, leaving the data
intact with the proper life time signal in place.
https://bugzilla.gnome.org/show_bug.cgi?id=786385
The 'data' object is attached to the MetaWaylandSurface as a GObject
qdata. It is created once, and stays allocated until the surface is
destroyed. To make things clearer, connect to the "destroy" signal just
after creating, and from a on_surface_destroyed() callback call the
.._free() function.
https://bugzilla.gnome.org/show_bug.cgi?id=786385
When suspending (i.e. VT switching away, the GDM gnome-shell instance
gets hidden, or changing user), destroy the onscreen and offscreen
monitor framebuffers. When resuming, the stage views and framebuffers
will be recreated anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=786299
Plug the new MetaInhbitShortcutsDialog to the relevant Wayland protocol
implementation.
Also, remember the last user choice for a given surface to avoid asking
continuously the same question.
https://bugzilla.gnome.org/show_bug.cgi?id=783342
Add a mechanism to MetaWaylandSurface that inhibits compositor's own
shortcuts when the surface has input focus, so that clients can receive
all key events regardless of the compositor own shortcuts.
This will help with implementing "fake" active grabs in Wayland and
XWayland clients.
https://bugzilla.gnome.org/show_bug.cgi?id=783342
The cursor surface would be remembered until the next proximity in
event, causing flashing of the old cursor till the client underneath
the tablet tool sent the zwp_tablet_tool.set_cursor request.
Forgetting about the cursor surface on proximity out makes the cursor
invisible till the request is made.
More specifically, avoid crossing events, since clutter does not set
modifier/button state on those. Fixes implicit grabs being broken when
the pointer moves past the surface boundaries.
https://bugzilla.gnome.org/show_bug.cgi?id=785347
Since a wl_buffer is independent of the GL context in use (unlike, e.g.,
a GL renderbuffer), EGLImages with the EGL_WAYLAND_BUFFER_WL target must
pass EGL_NO_CONTEXT as the context. Quoting from the
EGL_WL_bind_wayland_display spec:
After querying the wl_buffer layout, create EGLImages for the
planes by calling eglCreateImageKHR with wl_buffer as
EGLClientBuffer, EGL_WAYLAND_BUFFER_WL as the target, NULL
context.
The check was already present inside _cogl_egl_create_image.
https://bugzilla.gnome.org/show_bug.cgi?id=785263
Signed-off-by: Daniel Stone <daniels@collabora.com>
Moved from g-s-d's media keys plugin, where it was called "video-out",
since it requires changing the current monitor configuration and we
want to remove the old DBus API.
This implementation is intentionally simple and not really meant for
more than debugging and validating the various configurations. A
better user experience will be introduced in gnome-shell with a custom
keybinding handler.
The default value includes <Super>P in addition to the standard keysym
for historical reasons.
https://bugzilla.gnome.org/show_bug.cgi?id=781906
This will allows us to support the XF86Display key present on some
laptops, directly in mutter. This is also known, in evdev, as
KEY_SWITCHVIDEOMODE.
The common usage for this key is to alternate between a few well known
multi-monitor configurations though these aren't officially
standardized. As an example, Lenovo documents it as:
"Switches the display output location between the computer display
and an external monitor."
On this patch, we're just introducing the configurations that have been
implemented in g-s-d until now, which go a bit beyond the above
description.
https://bugzilla.gnome.org/show_bug.cgi?id=781906
Test that a tiled monitor with tile (0, 0) as the non-main output,
where main output is defined as the output that is active as long as
the monitor is active.
https://bugzilla.gnome.org/show_bug.cgi?id=781723
Instead of letting MetaMonitor derive the logical monitor size, then
using the main monitor for the position, just let MetaMonitor derive
the whole layout including the position. This means it can deal with
tiled monitors better, for example when the main output (the output
always active when the monitor is active) is not the origin output (the
output with tile position (0, 0)).
https://bugzilla.gnome.org/show_bug.cgi?id=781723
Adds basic support for the "wheel" event from the Wayland tablet protocol.
Ideally we would accumulate the angle and report a wheel event with an
appropriate value for "clicks". We can get away with a much cruder method
for the time being, however, since no Wacom tablet puck actually provides
a smooth scrollwheel. Checking whether the angle in CLUTTER_INPUT_AXIS_WHEEL
exceeds a nominally-small threshold is sufficient to determine that the
wheel has advanced by at least one physical click.
https://bugzilla.gnome.org/show_bug.cgi?id=783716
When updating the main monitor, make sure to update the toplevel main
monitor before trying to use that as the main monitor for non-toplevel
windows (such as popups). Without this, when the main monitor is
updated as a side effect to monitors being changed (for example due to
a hot plug event, or coming back from being suspended) the
main monitor pointer may, after 'monitors-changed' has completed, point to
freed memory resulting in undefined behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=784867
This is used to request key focus on the close dialog whenever
a window that is frozen would receive key focus. Also, ensure
that the dialog gets focus when first shown if the window was
meant to receive input.
https://bugzilla.gnome.org/show_bug.cgi?id=762083
Otherwise the ClutterEventFilter will consider these handled, and not
forward these to Clutter. This gets necessary for key handling if we
mean to implement the close dialog with Clutter UI.
https://bugzilla.gnome.org/show_bug.cgi?id=762083
The list of files being parsed for enumerations include the header file
we are building with the enumeration types.
Additionally, we are concatenating multiple runs in the same temporary
files; on failure, the temporary files are left around, which means we
end up with broken headers and sources.
Just like we do for buttons, with a few twists. These have 2 directions
mappable to different keycombos, and are affected by the current mode
in their group.
https://bugzilla.gnome.org/show_bug.cgi?id=782033
Moved from g-s-d's media keys plugin, where it was called
"video-rotate", since it requires changing the current monitor
configuration and we want to remove the old DBus API.
https://bugzilla.gnome.org/show_bug.cgi?id=781906
This basically moves g-s-d's orientation plugin into mutter so that
eventually g-s-d doesn't need to build monitor configurations by
itself anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=781906
Since commit 6b5cf2e, we keep override redirect windows on a layer
above regular windows in the clutter actor scene graph. In the X
server, and thus for input purposes, these windows might end up being
stacked below regular windows though, e.g. because a new regular
window is mapped after an OR window.
Fix this disconnect by re-stacking OR windows on top when syncing the
window stack with the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=780485
When verifying if a configuration is applicable, don't set it as
current when applying succeeded, or else reverting to a previous
configuration doesn't work after having verified.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
Differentiate between non-interlaced and interlaced modes. This is done
by appending an "i" after the resolution part of the mode ID, and
adding a 'is-interlaced' (b) property to the mode properties.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
To be more flexible without having to change any D-Bus type signatures
in the future, replace the 'uint' flags value (currently determining
whether a mode is current and/or preferred) with a variant lookup table.
The keys 'is-current' (b) and 'is-preferred' (b) replace the existing
flags.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
To be able to add more modes types that happen to have the same
resolution and refresh rate, change the API to specify modes using an
ID string. The ID string is temporary, and only works for associating a
mode for the monitor instance that it was part of.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When calculating sizes given some size and a fractional logical monitor
scale with precision loss, round the result of the floating point
calculation to the closest integer, as otherwise we might end up with
result smaller by 1 if there was a loss of precision when calculating
the scale.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
To be able to render the pointer cursor sprite at sub-(logical)-pixel
positions, track the pointer position using floats instead of ints.
This also requires users of the cursor sprite rect to deal with
floating points, when e.g. finding the logical monitor etc.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When passing scales over D-Bus, we'll loose some precision. To set the
correct scale, use the configured scale and look up the one actually
supported by the monitor mode, and use that. To match the supported one
with the configured one, the difference must be within rounding error
range.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
We manually scaled pointer motions when they travel over a scaled
monitor. When a stage view of a monitor is also scaled, in practice this
meant we scaled twice. Avoid this by only manually scaling the pointer
motion when stage views are not scaled.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When using logical sized monitors we are allowed to use fractional scaling
but only if the resulting scaled logical monitor size is in integer form.
So, in order to get this, we allow to scale the monitor to up to
8 fractional values per integer, doing some computation in order to
fetch the nearest values which are closer to the scaling factors we can
permit.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
This changes the API to pass supported scales per mode instead of
providing a global list. This allows for more flexible scaling
scenarious, where a scale compatible with one mode can still be made
available even though another mode is incompatible.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When the logical layout mode is used, allow configuring the scaling to
be non-integer. Supported scales are so far hard coded to include at
most 1, 1.5 and 2, and scales that doesn't result in non-fractional
logical monitor sizes are discarded.
Wayland outputs are set to have scale ceil(actual_scale) meaning well
behaving Wayland clients will provide buffers with buffer scale 2, thus
being scaled down to the fractional scale.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
To support fractional scaling, change the stage view scale to be a
float instead of an int. Also change the places where it is retrieved
and used when scaling things.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
Previously gnome-shell listened on the Xft Xsettings via GTK+s
GtkSettings to get the font DPI setting. The Xsetting might not
be what we want, and we should not rely on Xsettings when we don't need
to, so lets manage it ourself.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
The caller in clutter really expects an error if fd==-1, so make
sure we set one here. Otherwise we get a nice crash in addition to
the failure to open the /sys file. Also, retry on EINTR.
https://bugzilla.gnome.org/show_bug.cgi?id=784881
Window moving and resizing depends on the `meta_wayland_seat_get_grab_info`
function succeeding. At the moment, tablet tools do not generate implicit
grabs like the pointer and touch. This commit adds the necessary elements
to track implicit grabs and retrieve their information.
https://bugzilla.gnome.org/show_bug.cgi?id=777333
When moving a window between two non-adjecent logical monitors, don't
try to tile a window when the window position is outside of any logical
monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=783630
With GLVND, whenever we have both Mesa's and NVIDIA's drives installed
in the system, initializing the GBM backend will always succeed,
regardless of what GPU you have on your system.
This is due to GBM's software rendering fallback.
It seems better to initialize the EGLDevice backend first, which will
fail to find a device match when given a non-NVIDIA GPU.
https://bugzilla.gnome.org/show_bug.cgi?id=784272
When the number of (static) workspaces decreases, we relocate windows
from extra workspaces before removing them. As removing a non-empty
workspace is not allowed, we assert that it doesn't contain any windows
before removing it.
However that assert is
- pointless, because meta_workspace_remove() already asserts that
the workspace is empty
- wrong, because even empty workspaces contain windows that are set
to show on all workspaces
Simply drop the assert to avoid a crash when trying to remove a workspace
while on-all-workspaces windows are present.
https://bugzilla.gnome.org/show_bug.cgi?id=784223
Wacom's display tablets typically do not have (0,0) coincident with the top
left corner of the screen. This "outbound" area must be taken into account
when setting the area or else an unexpected offset of the pointer will
occur.
https://bugzilla.gnome.org/show_bug.cgi?id=784009
While it doesn't make sense to set a window as transient to
itself, our existing check whether making a window transient
doesn't cover it, so it's still possible to create an infinite
loop.
https://bugzilla.gnome.org/show_bug.cgi?id=783502
It is possible to interpret the ammount of padding provided to the
*_set_tablet_area functions in two different and incompatible ways. The X11
backend effectively treats them as being input-centric (i.e., the padding
defines the size of the "dead zone" on the tablet) while the native backend
has an output-centric viewpoint (i.e., the padding defines the size of the
"dead zone" on the display) viewpoint. This difference in opinion causes the
cursor offset to change when switching between Xorg and a Wayland sessions.
The calibration utility within g-c-c does its calculations with an input-
centric viewpoint, so this patch modifies the native backend to work
correctly with these values. To change viewpoints, we can simply invert
the scale and negate the offset. It should be noted that this function
also forgot to apply scaling to the offsets (as required by the matrix
transform done by libinput) which would have further compounded the
cursor offset issue under Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=784009
It would only allow to alternate between the logical monitors, we actually
want to return NULL here so it can cycle to the whole span of monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=782032
Instead of checking all MetaMonitors in the monitor manager, we want to
look (as the function name says) in the MetaMonitors contained in the
given logical monitor.
Otherwise, it will return TRUE for every logical monitor, given we are
querying for an existing EDID.
https://bugzilla.gnome.org/show_bug.cgi?id=782032
Due to the pen/eraser device separation in X11, CLUTTER_TABLET_DEVICE does
not apply there, this device type is only used in native/evdev. Checking
for CLUTTER_PEN/ERASER_DEVICE makes the left-handed mode correctly applied
on tablets.
https://bugzilla.gnome.org/show_bug.cgi?id=782027
For devices connected via HDMI (supposedly TVs) we want have a
scale factor of 1 if we are *below* the smallest 4k resolution
width (not equal or above) and do the scaling factor computation
if we are above the limit. This check was apparently wrongly
ported from gnome-settings-daemon.
Based of a patch by Caolan McNamara <caolanm@redhat.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=777347
Previously, the function only returned `TRUE` if the given surface was
equal to the given pointer's focused surface. This changes the behaviour
to also return `TRUE` if any of the given surface's subsurfaces are
equal to the pointer's focused surface.
https://bugzilla.gnome.org/show_bug.cgi?id=781811.
For size change animations, plugins rely on the size change effect being
followed by size changed signal (or effects being kill altogether).
However unless the move_resize operation included the STATE_CHANGED flag,
the size changed event emitted when the compositor syncs the window
geometry only happens when the operation resulted in an actual change.
To avoid animations getting stuck in that case, make sure to include the
flag when tiling a window.
https://bugzilla.gnome.org/show_bug.cgi?id=783293
Use the "destroy" MetaWaylandSurface signal instead of the wl_resource
destroy signal for tracking the lifetime of the surface with pointer
focus.
As unsetting the focus may have side effects due to handlers of the
"focus-surface-changed" signal, connect the signal after the default
handler to make sure other clean up facilities have the chance deal with
the surface destruction before we try to unset the focus.
https://bugzilla.gnome.org/show_bug.cgi?id=783113
A single keysym can resolve to multiple keycodes. Instead of only using
the first one and ignoring the others, we store all codes in
MetaResolvedKeyCombo and then handle all of them in keybinding
resolution. If we already have bound a keycode for a keybinding with a
specific keysym then this can get overwritten by a new keybinding with a
different keysym that resolves to the same keycode. Now that we resolve
and bind all keycodes for a keysym this might happen more often; in that
case warn but still overwrite, but only for the first keycode for each
keysym. If a secondary (i.e. all non-first keycodes) is already indexed
we just ignore that; this should resemble the old behavior where we
only took the first keycode for any keysym as close as possible.
https://bugzilla.gnome.org/show_bug.cgi?id=781223
We will both create and destroy monitors during initialization (when
using the X11 backend), so don't try to access the monitor manager from
the backend, but store a pointer to it instead.
It's stored in MetaMonitor even though only MetaMonitorTiled uses it,
mostly because it makes more sense to store such a pointer there.
https://bugzilla.gnome.org/show_bug.cgi?id=781723
In some circumstances, the origin tile (0, 0) is not the one that
should be used to drive the monitor when using a non-tiled mode. Update
MetaMonitorTiled to support this case. It also seems to be so that the
preferred mode might be some low resolution or bogus mode on these
monitors, so also adapt MetaMonitorTiled to manage to ignore the
preferred mode of a tiled monitor if the preferred mode doesn't use
both tiles.
https://bugzilla.gnome.org/show_bug.cgi?id=781723
Only support suggested monitor positioning if the monitor is non-tiled.
Normally this functionality is used by virtual machines to provide a
hint of how to place the virtual monitors, and they don't tend to use
tiled monitors anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=781723
This commit makes it possible to configure logical monitor scale also
when running on top of an X11 server using Xrandr. An extra property
'requires-globla-scale' is added to the D-Bus API is added to instruct
a configuration application to only allow setting a global logical
monitor scale.
This is needed to let gsd-xsettings use the configured state to set a
XSettings state that respects the explicit monitor configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The scale calculation doesn't really have anything to do with KMS, and
eventually we'll want to have mutter calculate the monitor scale for
non-KMS backends too, so move the scale calculation to MetaMonitor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Introduce MetaSettings and add the settings managed by MetaBackend into
the new object. These settings include: experimental-features and UI
scaling factor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
hotplug_mode_update is used (mostly by VMs nowadays, and
VMware has implemented it) to inform that modes list (including
the preferred one) might change after an uevent.
However, when using MetaMonitorConfigManager we should
ignore this value at initialization level, or mutter
won't restore the configured values at startup.
https://bugzilla.gnome.org/show_bug.cgi?id=783073
Call meta_compositor_size_change_window while tiling in order
to emit the size-change signal. Since the untiling action is
considered a unmaximize size change, treat tiling as a maximize
size change for consistency.
https://bugzilla.gnome.org/show_bug.cgi?id=782968
Disable-while-typing disables the touchpad while the user is typing.
This patch introduces the necessary backend code to implement the
org.gnome.desktop.peripherals.touchpad.disable-while-typing setting of
gsettings-desktop-schemas which was implemented in commit
4c5b1c1df399d6afaaccb237e299ccd1d5d29ddd and released as part of 3.24.
This is known as dwt in libinput.
This patch has been tested on X11 and Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=764852
Let the backend implementations create their own input settings
backend, as is done with other backend specific special purpose
backends. Also use the macro for declaring the GType.
https://bugzilla.gnome.org/show_bug.cgi?id=782152
meta_backend_real_post_init() had some open coded initialization with
some unexpected interdependencies. Split these up and move them to their
own functions in order to make meta_backend_real_post_init() a bit more
readable.
https://bugzilla.gnome.org/show_bug.cgi?id=782152
Relayouts in clutter may trigger synthesized crossing events if the
actor below the pointer changes. In that situation we do need to
repick() the MetaWaylandPointer to end up with the right current
wayland surface.
https://bugzilla.gnome.org/show_bug.cgi?id=755164
When terminating mutter running as a display server, don't try to resize
maximized windows when unmanaging, as at this point, they will have no
MetaWaylandSurface. Originally this was done instead of setting the
net_wm_state to not mess with future window managers, but when we're a
Wayland compositor, this does not matter.
https://bugzilla.gnome.org/show_bug.cgi?id=782156
If a client changes the state of a surface to issue a set_maximize, this
causes apply_pending_state() to be called before mutter has placed the
window.
If the monitor on which the window is to be shown initially is different
from the one where the pointer is placed, this causes the effect to be
played at the wrong location before the window eventually reaches its
location on another monitor.
Force the window to be placed prior to change its state to maximized in
xdg-shell so that mutter won't relocate the window afterwards.
This also avoids sending an xdg_toplevel.configure with a size of 0x0
which would cause the client to initially draw its surface with some
arbitrary size.
https://bugzilla.gnome.org/show_bug.cgi?id=782183https://bugzilla.gnome.org/show_bug.cgi?id=781353
This is an interface that can be used to implement the "application
is not responding" dialog. One instance is created per window, which
is initially hidden, and can be shown/hidden on demand.
https://bugzilla.gnome.org/show_bug.cgi?id=711619
If we translate between text/plain;charset-utf-8 from the wayland side to
UTF8_STRING on the X11 side, we want to continue all further X11 selection
requests using the same translated UTF8_STRING atom than we use in the
first XConvertSelection call.
https://bugzilla.gnome.org/show_bug.cgi?id=782472
Previously we would bail out early in xdg_toplevel_role_commit() if no
geometry change was set, ignoring the possible min/max size hints
changes.
But setting a min/max size hint without changing the geometry is
perfectly valid, so we ought to apply the min/max changes regardless of
a geometry change.
https://bugzilla.gnome.org/show_bug.cgi?id=782213
If the client doesn't set a geometry using xdg_shell, we'll compute its
geometry based on its surface and subsurfaces.
Yet, we translate that as a window (re)size only when there is a pending
geometry, that we don't have when we computed the geometry by ourself.
Make sure we set the pending new geometry flag when computing the
geometry when it actually changed.
https://bugzilla.gnome.org/show_bug.cgi?id=782213
A client can still commit state to a destroyed subsurface. It wont
update anything on the screen, since the subsurface will not be
visible, but mutter should still handle it and not crash.
https://bugzilla.gnome.org/show_bug.cgi?id=781391
g_hash_table_insert() doesn't replace the key. This was a problem
because the key was owned by the value inserted into the hash table, so
when a value was removed, the key was freed, meaning that the key in
the hash table was no pointing to freed memory. Fix this by using
g_hash_table_replace() instead, which work the same except that it
replaces the key with the one passed. This means that the key of a
value in the hash table is always the key owned by the value.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The guard for handling size differences between keys were broken, it
only checked if the key passed by the second argument ended up being
shorter.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
An inactive monitor will not be assigned to a logical monitor, so don't
try to match against those. This avoids a dereferencing a NULL when the
main output of an inactive monitor doesn't have an assigned CRTC.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Instead of looking at the GTK+ settings, check the logical monitor
state and determine the UI scaling factor given the maximum logical
monitor scale. This is only enabled when the monitor config manager
feature is enabled, as only then can a scale be explicitly configured.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This adds a function to be used by gnome-shell to get the logical
monitor given a connector name. For now, use the same index integer
method to reference a logical monitor, but this should be revisited by
providing a better API later.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The connector returned is the one of the main output. In other words,
for tiled monitors, it is the connector of the (0, 0) tile, and for
non-tiled, it is simply the connector of the output.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The UI scaling depends on whether the framebuffers are scaled. Enable
the caller to determine the what scale its UI should be drawn in, in
relation to the stage coordinate space by calling this function. A new
singal "ui-scaling-factor-changed" is added in order to liston for for
changes.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Window scaling is a clutter feature used to enable automatic scaling of
stage windows when running under as an application in windowing system.
Clutter in mutter does not support running as a stand-alone application
toolkit, so lets remove this unused feature.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
When told to, MetaMonitorConfigStore will save the current
configuration state by replacing the monitors-experimental.xml file
(while backing a backup).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Test that configuration works as expected when the backend doesn't
support handling the transform and an intermediate offscreen
framebuffer is used.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
In order to test deriving the logical state from the underlying
configuration, as is always done on X11, make the test backend derive
the state when stage views are disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Derive the logical monitor position not by looking at the main output
(the (0, 0) tile), but the one that is placed on the top-left corner.
This might be the non-main output on certain transformations.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Only the first output of the first monitor of the primary logical
monitor should be made primary. This fixes an issue where the wrong
logical monitor ended up as primary when the logical state was derived.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Make the nested backend emulate how the real backends actually draw,
i.e. by drawing each CRTC separately. This makes it possible to test
different configuration paths that can take place on different
hardware, without having said hardware.
For example, by setting MUTTER_DEBUG_TILED_DUMMY_MONITORS and
MUTTER_DEBUG_NESTED_OFFSCREEN_TRANSFORM to "1", one can test a system
with MST (tiled) monitors where the GPU doesn't support some transform.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add the transform as a logical monitor parameter, both when getting the
current state and applying a new configuration. The transform is defined
to be identical to MetaMonitorTransform.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Adds a <transform> element to <logicalmonitor>. It has two possible sub
elemenst: <rotation> which can be normal, right, left or upside_down,
and <flipped> which can either be true or false.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add support for rotated monitors. This is done per logical monitor, as
every monitor assigned to a logical monitor must be transformed in the
same way. This includes being transformed on the same level; e.g. if
the backend does not support transforming any monitor of a logical
monitor natively, then all monitors will be transformed using the
offscreen intermediate framebuffer.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Always draw the stage to an offscreen framebuffer when using the nested
backend, so that we more emulate things more similarly to how it works
real-world, i.e. it'll work the way whether stage views are enabled or
not.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The CRTC position depends on the transform and how the transform is
implemented. The function calculating the positions still doesn't
support anything but the non-transformed case; this commit is in
preparation of adding support for transforms.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Keep track of the logical monitor transform. When a logical monitor is
transformed, all of its monitors are also transformed in the same way.
A logical monitor can either be transformed on the CRTC level, or using
an offscreen intermediate buffer. In both cases will the logical
monitor be transformed, but only in the latter will the view be
transformed.
MetaCrtcs::transform currently does not represent whether the CRTC is
configured to be transformed or not; only when the backend can handle
it does it correctly correspond to the actual CRTC configuration. This
is intended to change with MetaMonitorConfigManager.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Split up the MetaRendererX11 class into one for when running as a
X11 compositing manager, and one for when running as a nested Wayland
compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Instead of using a environment variable, add a new 'experimental
feature' gsetting keyword "monitor-config-manager" that enables the use
of the new MetaMonitorConfigManager. This commit also makes it possible
to switch between the two systems without restarting mutter.
The D-Bus API is disabled when the experimental feature is not enabled,
and clients trying to access it will get a access-denied error in
response. A new property 'IsExperimentalApiEnabled' is added to let the
D-Bus client know whether it is possible to use the experimental API or
not.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The logical monitor config array ownership was transferred to the
config object when it was created, but was not unset when the config
verification failed, causing the clean up path for invalid configs to
try to clean up the same list again.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This commit adds support for rendering onto enlarged per logical
monitor framebuffers, using the scaled clutter stage views, for HiDPI
enabled logical monitors.
This works by scaling the mode of the monitors in a logical monitors by
the scale, no longer relying on scaling the window actors and window
geometry for making windows have the correct size on HiDPI monitors.
It is disabled by default, as in automatically created configurations
will still use the old mode. This is partly because Xwayland clients
will not yet work good enough to make it feasible.
To enable, add the 'scale-monitor-framebuffer' keyword to the
org.gnome.mutter.experimental-features gsettings array.
It is still possible to specify the mode via the new D-Bus API, which
has been adapted.
The adaptations to the D-Bus API means the caller need to be aware of
how to position logical monitors on the stage grid. This depends on the
'layout-mode' property that is used (see the DisplayConfig D-Bus
documentation).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This gsetting will allow the adding of keywords to a array, where each
keyword may enable an experimental feauter, if the given mutter version
supports that particular experimental feature. Emphasis is put on the
lack of guarantee that any such keyword has any effect. Currently no
keywords are defined.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Make the concept of maximum screen size optional, as it is not
necessarily a thing on all systems (e.g. when using the native backend
and stage views).
The meta_monitor_monitor_get_limits() function is replaced by a
meta_monitor_manager_get_max_screen_size() which fails when no screen
limit is available. Callers and other users of the previous max screen
size fields are updated to deal with the fact that the limit is
optional.
The new D-Bus API is changed to move it to the properties bag, where
its absence means there is no applicable limit.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add a new D-Bus API that uses the state from GetCurrentState to
configure high level monitors, instead of low level CRTCs and
connectors. So far persistent configuration is not implemented, as
writing to the configuration store is still not supported.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Logical monitors in a configuration must be adjecent to each other,
meaning there will be at least one pixel long side touching some other
logical monitor.
The exception to this is when there is only one logical monitor, which
cannot be adjecent to any other.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
We don't want to limit ourself to whole integers for configuration, as
that'd mean it wouldn't be able to provide configurations for
fractional scalings. Thus, change scales to be referred to as floats
instead of ints.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add a 'is_underscanning' entry to the properties map, if the monitor
supports underscanning. The client should assume a monitor does not
support underscanning if no property was added.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add a D-Bus method for getting the current monitor and logical monitor
state. Currently does not contain information about transforms or any
limitations (such as limited CRTCs and cloning).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Let the backends decide whether to just rebuild a derived state, or use
the NULL config to rebuild an empty logical state.
This also changes the expected screen size values of the no-outputs
test; as this case is actually handled now.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Add support to configure the logical monitor scale. With this, it
becomes possible to override the automatically calculated scaling
number per logical monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Replace the 'scale' of an output with a vfunc on the MetaMonitorManager
class that takes a monitor and a monitor mode which calculates the
scale. On X11 this always returns 1, on KMS, the old formula is used.
On the dummy and test backends, the already configured values are
returned.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The default (calculated) scale is derived from the output, but
ultimately set via the monitor scale. This will enable config files to
override the scale. Yet to be done is handling when a scale is not
supported by a backend (i.e. the X11 backend).
https://bugzilla.gnome.org/show_bug.cgi?id=777732
In some cases the hardware cursor is invisible when Mutter is launched from the
TTY, due to drmModeSetCursor2 failing without a fallback being set.
This patch captures the return value of drmModeSetCursor2 and in case of an
error, enables the texture based fallback. It adds a `broken` state, that is
checked in should_have_hw_cursor() and
meta_cursor_renderer_native_realize_cursor_from_*() to avoid copying every
cursor into a gbm buffer when we know it will fail every single time.
https://bugzilla.gnome.org/show_bug.cgi?id=770020
Quick motions can come across as too fast (or slow) if it crosses outputs
with different scales. If this happens, rebuild the motion delta applying
the scale that applies to each logical monitor the pointer is crossing.
https://bugzilla.gnome.org/show_bug.cgi?id=778119
To allow for more natural pointer movements from relative pointer
devices (e.g. mouse, touchpad, tablet tool in relative mode, etc), scale
the relative motion from libinput with the scale of the monitor. In
effect, this means that the pointer movement is twice as fast (physical
movement vs numbers of pixels passed) as before, but it also means that
the same physical movement crosses the distance in a GUI no matter if
it is on a HiDPI monitor or not.
https://bugzilla.gnome.org/show_bug.cgi?id=778119
Clutter's evdev input backend has no support for setting double
click timeout set by gnome-settings-daemon. This results in
touchpad click events timing out on wayland, because the
default timeout value wasn't enough.
This patch moves timeout setting to mutter and removes X11
backend specific setting from clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=771576
The code calculating the output scale involves calculations around pixel
and mm sizes, however we do compare post-transformation pixel sizes to
untransformed mm sizes, which breaks the DPI calculations. Fix this by
transforming back pixel sizes back to untransformed.
While we're at it, actually compare the output height to HIDPI_MIN_HEIGHT
instead of its width, it seems right according to the #define name and
comment.
https://bugzilla.gnome.org/show_bug.cgi?id=777687
When a state changed, e.g. a window went from unfullscreen to
fullscreen, always sync the window geometry, otherwise a compositor
application (e.g. gnome-shell) might end up with an unfinished window
state transition effect.
Without always syncing, the compositor plugin will see a 'size-change'
event, as a result of the state change, but if the size didn't change,
it would never see the 'size-changed' event. If an effect, for example
gnome-shell's fullscreen effect, is triggered on 'size-change' it might
rely on the actual size change to not get stuck. This commit allows it
to have this dependency.
This fixes a bug where a fullscreen effect gets "stuck" when a window
goes fullscreen without changing the window geometry.
https://bugzilla.gnome.org/show_bug.cgi?id=780292
The mitigation to avoid missing EDID blob was incorrect; the reason it
sometimes failed to read was a race between different applications all
trying to read the EDID at the same time. E.g. gnome-shell as GDM would
at the same time as the session gnome-shell try to read the EDID of the
same connector at the same time, triggering a race in the kernel,
making the blob reading ioctl occationally fail with ENOENT.
Remove this mitigation, as it didn't really mitigate anything; the race
could just as well happen when doing the actual read later.
https://bugzilla.gnome.org/show_bug.cgi?id=779837
When mutter is paused (i.e. not the DRM master), stop listening on
hotplug events. Instead read the current state and set modes when
resumed.
This avoids a race condition in the drm API which currently only
manages to properly deal with one application querying the EDID state
at the same time when there are multiple mutter instances running at
the same time (e.g. gnome-shell driving gdm at the same time as
gnome-shell as the session instance).
https://bugzilla.gnome.org/show_bug.cgi?id=779837
If the dnd window ends up lower in the overall stack than the window
it's supposed to fence, the drop might end up in some other window
underneath the expected target window.
Maps and raises the dnd window each time it's shown so that it's always
placed above.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=779800
A MetaOutput is a connector, not exactly a monitor or a region on the
stage; for example tiled monitors are split up into multiple outputs,
and for what is used in input settings, that makes no sense. Change
this to use logical monitors instead of outputs.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
When no output was specified, the screen limit was used to calculate the
aspect ratio. The screen limit, however, is either just an arbitrary
number if no screen limit is applicable, or a hardware graphics buffer
limit, which has nothing to do with anything actually displayed. Change
it to use the screen size instead, to get something that makes more
sense when no output is found.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Expose via a new API whether the transform on a logical monitor is
handled by the backend. This was previously only exposed only in the
native backend. This will be used to emulate not supporting transforms
in the backend in the nested backend.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Previously, the size of the logical monitor was derived directly from
the tiling information. This works fine until we add transformations,
or set modes with a dimension different from the resulting resolution
when tiled. Fix this by traversing the assigned CRTC rects, as these
are already transformed by the configuration system.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
By setting the environment variable MUTTER_DEBUG_TILED_DUMMY_MONITORS
to "1", the dummy MetaMonitorManager backend used when running mutter
nested will create tiled monitors instead of single-output/CRTC
monitors. This makes it possible to test tiled monitor configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Refactor monitor generation by splitting the generation of modes, CRTCs
and outputs into a separate function. A side effect is that each output
will have its own set of possible modes.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Split up logical monitor cration into derived (when derived from
current underlying configuration) and non-derived (when creating from a
logical monitor configuration). This avoids that type of logic in the
logical monitor creation function.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Add support for non-tiled monitor modes on tiled monitors. This is done
by adding all the other supported modes, except the modes with the
same resolution as the tile dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
When adding a monitor and all its outputs, don't try to set the logical
monitor of the outputs CRTC if none was assigned. This might happen if
a tiled monitor only uses a subset of the connectors it are connected
via.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
Don't set the CRTC rect and screen size at in read_current(), as those
depends on how the configuration is done. Instead, don't set the CRTC
rect at all, and update the screen dimensions when being configured.
https://bugzilla.gnome.org/show_bug.cgi?id=779745
QT apps reject DnD if the timestamp received in the SelectionRequest
event isn't the same it gave in XdndPosition/Drop client messages.
Bookkeeping and using it in XConvertSelection makes it happy again.
https://bugzilla.gnome.org/show_bug.cgi?id=779757
We are keeping accounting of the focus window as seen by the DnD bridge
right here, so use it instead of the MetaWaylandDragGrab focus as it may
lag behind the real focus (i.e. till the drag source notices the window
and sends XdndEnter to it).
This leads to the window trying to be repositioned more often than
necessary when the drag source takes long to send the XdndEnter client
message, and maybe not repositioned at all if the pointer leaves the
surface while no XdndEnter message was received.
https://bugzilla.gnome.org/show_bug.cgi?id=763246
We currently wait for the selection being cleared by the drag source,
which might not happen on not quite educated clients. This may leave
a stuck XDND grab in the compositor side.
We can actually do a bit better, and clear the grab if:
1) The drag source sent XdndDrop to the wayland drag destination.
2) There's no accepting drag destination and all pointer buttons are
released.
3) As usual, whenever the drag source clears the selection data
https://bugzilla.gnome.org/show_bug.cgi?id=763246
No XDnD events which notify DnD status change comes in Wayland. To emulate XDnD
behavior, MetaDnd checks whether there is a grab or not when the modal window
starts showing. When there is a grab, it processes the raw events from
compositor, and emits DnD signals for plugin.
https://bugzilla.gnome.org/show_bug.cgi?id=765003
Implement MetaDnd for emitting DnD signals to plugins such as gnome-shell. The
xdnd handling code comes from gnome-shell, and it is hidden behind MetaDnd now.
https://bugzilla.gnome.org/show_bug.cgi?id=765003
When running nested, the pointer can be outside of the stage, meaning
outside of any logical monitor. Handle this when getting the current
logical monitor by falling back to the first logical monitor when the
pointer coordinate is outside of any logical monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=779001
Whenever an EGLOutput consumer is temporary unable to handle
eglStreamConsumerAcquire() operations (e.g. during a VT-switch),
an EGL_RESOURCE_BUSY_EXT error is generated.
This change adds the appropriate error handling to flip_egl_stream() in
order to recover from such errors.
https://bugzilla.gnome.org/show_bug.cgi?id=779112
This change adds descriptions for the following errors to
get_egl_error_str():
- EGL_BAD_STREAM_KHR
- EGL_BAD_STATE_KHR
- EGL_BAD_DEVICE_EXT
- EGL_BAD_OUTPUT_LAYER_EXT
https://bugzilla.gnome.org/show_bug.cgi?id=779112
Ungrabbed pointer motion events over a client window area don't even
reach mutter in X compositor mode, but as a wayland compositor we
process those events which ends up in a call stack like:
- meta_window_handle_ungrabbed_event
- meta_ui_frame_handle_event
- handle_motion_notify_event
- get_control
- meta_ui_frame_calc_geometry
Computing frame geometry is a relatively CPU expensive operation and
doing it on every motion event over a client window is pointless work
since we aren't going to change the cursor or prelight any frame
widget.
This commit special cases the determination of
META_FRAME_CONTROL_CLIENT_AREA using a much faster method. When
continuously moving the pointer over an X (client) window, it results
in a ~40% decrease in mutter cpu usage.
https://bugzilla.gnome.org/show_bug.cgi?id=779436
Set up things so that if the INTEL_swap_event extension is not present,
but the driver is known to have good thread support, we use an extra
thread and call glXWaitVideoSync() in the thread. This allows idles
to work properly, even when Mutter is constantly redrawing new frames;
otherwise, without INTEL_swap_event, we'll just block in glXSwapBuffers().
https://bugzilla.gnome.org/show_bug.cgi?id=779039
Commits 6dbec6f8, 734402e1 and f041b35b introduced memory leaks by
switching to returning copies instead of the original buffers but
forgetting to free those original buffers.
Some error cases were also not freeing the ->prop buffer as they
should.
https://bugzilla.gnome.org/show_bug.cgi?id=642652
Wayland windows can be zero sized until clients attach a buffer, but
our rectangle code doesn't deal with this case well, in particular,
meta_screen_get_monitor_for_rect() might end up choosing the wrong
monitor for a zero sized rectangle since
meta_rectangle_contains_rect() considers a zero sized rectangle at the
right or bottom edges of another rectangle (the monitor's) to be
contained there.
Since out size limits constraint will enforce a minimum size of 1x1,
we might as well enforce that when setting up the constraint info so
that the correct monitor gets chosen and the single monitor constraint
doesn't move these windows to the wrong one.
https://bugzilla.gnome.org/show_bug.cgi?id=772525
Wayland windows are initially zero sized until clients commit the
first buffer. Despite being invisible, clients are allowed to request
such windows to be fullscreened on a specific output before they
attach the first buffer which means we need to be able to move them.
meta_window_move_to_monitor() doesn't handle this case because these
windows' initial monitor is a placeholder since their initial
coordinates are 0,0+0+0, which results in us using a rectangle as
old_area for meta_window_move_between_rects() that might be to the "right"
of the window causing the move to go further out of the visible
screen's coordinates. This is later "corrected" by the constraints
system but the window might end up in the wrong monitor.
To fix this, we can make meta_window_move_between_rects() accept a
NULL old_area, meaning that we move the window to the new_area without
trying to keep a relative position.
https://bugzilla.gnome.org/show_bug.cgi?id=772525
The reason for the display to be closed may be meta_screen_new()
returning NULL, in which case we don't have a screen to free.
Avoid a segfault on exit by adding a proper check.
https://bugzilla.gnome.org/show_bug.cgi?id=778831
We currently don't have any shadow class for combo box popups,
which means the default shadow of normal windows is used. That's
clearly odd given that the two are very different, and isn't
consistent with GTK+-3's client-side shadows for popups. While
we could add a dedicated shadow class, the designers are fine
with reusing the existing shadow for dropdown-menus, so let's
do that.
https://bugzilla.gnome.org/show_bug.cgi?id=744667
Split up the X11 backend into two parts, one for running as a
Compositing Manager, and one for running as a nested Wayland
compositor.
This commit also cleans up the compositor configuration calculation,
attempting to make it more approachable.
https://bugzilla.gnome.org/show_bug.cgi?id=777800
In order to minimize the amount of breakage, while at the same time
making it easier to make backward incompatible changes needed to
continue turning libmutter into a capable Wayland compositor, make the
libmutter and friends (libmutter-clutter, libmutter-cogl*) parallel
installable by adding a version number to the name. This changes
various filenames, for example what previously was libmutter.so is now
libmutter-0.so (assuming the version for now is 0), and
libmutter-clutter-1.0.so is now libmutter-clutter-0.so. The pkg-config
filenames and GObject introspection has been renamed to reflect this as
well.
This enables a downstream compositor rely on a specific version of the
libmutter API, while gracefully handling API/ABI changes by having to
update to the new version at their own pace.
https://bugzilla.gnome.org/show_bug.cgi?id=777317
This signal provides the necessary information to let gnome-shell trigger
updates of pad leds/oleds whenever a pad group switches mode, and the
actions associated to buttons do too.
https://bugzilla.gnome.org/show_bug.cgi?id=776543
And add specific private methods to notify about tablet mapping and mode
switches. The signal allows the mutter side to trigger OSDs in a generic
way.
https://bugzilla.gnome.org/show_bug.cgi?id=771098
As all the relevant backends are expected to provide
ClutterPadButtonEvents, it makes no sense to split the information,
plus all other event fields are now available and might be needed
in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=771098
Using ClutterInputDeviceEvdev::output-aspect-ratio. This only applies
to devices which are not calibratable, so again we need to implement
this at the toolkit level.
https://bugzilla.gnome.org/show_bug.cgi?id=774115
We couldn't properly merge output-mapping matrix and calibration into
one. Now that libinput calibration matrix is free to use, we can
actually implement tablet calibration with it.
https://bugzilla.gnome.org/show_bug.cgi?id=774115
Function "handle_raise_or_lower (src/core/keybindings.c)" is called
when running 'raise-or-lower' on a window. This function iterates
through all the windows in the stack to determine if our window is
already on top or obscured. The problem is that the window stack
includes windows in another workspaces and also windows that are
minimized.
https://bugzilla.gnome.org/show_bug.cgi?id=705200
The initial state of the hardware cursor is not known, so always force
update it the first time we update the cursor. Do this by changing the
'force' flag of update_hw_cursor() to an 'invalidated' hw cursor state.
https://bugzilla.gnome.org/show_bug.cgi?id=771056
Clutter assumed seat0 which is most usually, but not always correct.
Add an evdev-backend specific function to allow passing the seat
that will be used for ClutterDeviceManager construction, which we
already obtain in MetaLauncher.
https://bugzilla.gnome.org/show_bug.cgi?id=778092
If the meta_window_actor_effect_completed() triggers inconsistent
accounting, there's also high chances that the thaw call will be
unexpected at this time too, which will lead to a g_error().
This makes mutter more lenient to effect_completed() calls of the
right type (i.e. those triggering freeze/thaw) being performed more
times than necessary in the upper parts. A warning will be issued,
but the process won't abort.
https://bugzilla.gnome.org/show_bug.cgi?id=777691
Make sure that each logical monitor owns the expected actual monitors.
This currently needs special care when dealing with laptop lid the
configuration, as the MetaMonitorConfigManager path still deosn't
handle restoring the previous configuration, meaning the logical
monitor with the external monitor will continue being primary.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
This is partly redundant given that the current monitor mode is checked
against the CRTC mode, but this also checks the disabled CRTCs. Later
the configured mode position and transform will be checked.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Check that the crtc mode has the correct intra-monitor position. In
effect, this tests that the CRTCs in a tiled monitor are configured with
the correct mode on the correct position.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The MetaOutput::is_primary state was not correctly managed in two cases:
* for tiled monitors, the primary state got overridden when setting
the preferred resolution
* for laptop lid, it was not set if the laptop panel happened to be
the first output
https://bugzilla.gnome.org/show_bug.cgi?id=777732
The main output of the main (first) monitor of a primary logical
monitor should have the MetaOutput::is_primary field set; all other
outputs should have it not set.
All outputs associated with a logical monitor with presentation set
should have MetaOutput::is_presentation set. No other outputs should
have it set.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
