mutter/clutter/clutter-main.h

176 lines
7.1 KiB
C
Raw Normal View History

2006-05-29 04:59:36 -04:00
/*
* Clutter.
*
* An OpenGL based 'interactive canvas' library.
*
* Authored By Matthew Allum <mallum@openedhand.com>
*
* Copyright (C) 2006 OpenedHand
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see <http://www.gnu.org/licenses/>.
2006-05-29 04:59:36 -04:00
*/
#if !defined(__CLUTTER_H_INSIDE__) && !defined(CLUTTER_COMPILATION)
#error "Only <clutter/clutter.h> can be included directly."
#endif
#ifndef __CLUTTER_MAIN_H__
#define __CLUTTER_MAIN_H__
2006-05-29 04:59:36 -04:00
#include <clutter/clutter-actor.h>
2006-05-29 04:59:36 -04:00
#include <clutter/clutter-stage.h>
#include <pango/pango.h>
2006-05-29 04:59:36 -04:00
G_BEGIN_DECLS
/**
* CLUTTER_INIT_ERROR:
*
* #GError domain for #ClutterInitError
*/
2006-11-21 Emmanuele Bassi <ebassi@openedhand.com> * configure.ac: Enable debug messages also when --enable-debug is set to "minimum". * clutter/Makefile.am: * clutter/clutter-debug.h: Move all debugging macros inside this private header; make all debug macros depend on the CLUTTER_ENABLE_DEBUG compile time define, controlled by the --enable-debug configure switch; add G_LOG_DOMAIN define. * clutter/clutter-main.c: Clean up the debug stuff; add command line argument parsing using GOption; the debug messages now are triggered like this: CLUTTER_DEBUG=section:section:... clutter-app or like this: clutter-app --clutter-debug=section:section:... where "section" is one of the sections listed in clutter-main.c, or "all", for all sections; each section is bound to a flag, which can be used to define a domain when adding a debug note using the CLUTTER_NOTE() macro; the old CLUTTER_DBG() macro is just a wrapper around that, under the CLUTTER_DEBUG_MISC domain; CLUTTER_NOTE() is used like this: CLUTTER_NOTE (DOMAIN, log-function); where log function is g_printerr(), g_message(), g_warning(), g_critical() or directly g_log() - for instance: CLUTTER_NOTE (PANGO, g_warning ("Cache miss: %d", glyph)); will print the warning only if the "pango" flag has been set to the CLUTTER_DEBUG envvar or passed to the --clutter-debug command line argument. similar to CLUTTER_SHOW_FPS, there's also the --clutter-show-fps command line switch; also, the --display and --screen command line switches have been added: the first overrides the DISPLAY envvar and the second controls the X screen used by Clutter to get the root window on the display. * clutter/clutter-main.h: * clutter/clutter-main.c: Add extended support for GOption in Clutter; use clutter_init_with_args() to let Clutter parse your own command line arguments; use instead clutter_get_option_group() to get the GOptionGroup used by Clutter if you want to do the parsing yourself with g_option_context_parse(). The init sequence has been verified, updated and moved into common functions where possible. * clutter/pango/pangoclutter-render.c: * clutter/*.c: Include "clutter-debug.h" where needed; use CLUTTER_NOTE() instead of CLUTTER_DBG(). * examples/super-oh.c: Use the new clutter_init_with_args() function, and add a --num-hands command line switch to the SuperOH example code controlling the number of hands at runtime.
2006-11-21 16:27:53 -05:00
#define CLUTTER_INIT_ERROR (clutter_init_error_quark ())
2006-05-29 04:59:36 -04:00
2007-08-07 10:03:58 -04:00
/**
* ClutterInitError:
* @CLUTTER_INIT_SUCCESS: Initialisation successful
* @CLUTTER_INIT_ERROR_UNKNOWN: Unknown error
* @CLUTTER_INIT_ERROR_THREADS: Thread initialisation failed
* @CLUTTER_INIT_ERROR_BACKEND: Backend initialisation failed
* @CLUTTER_INIT_ERROR_INTERNAL: Internal error
*
* Error conditions returned by clutter_init() and clutter_init_with_args().
*
* Since: 0.2
*/
typedef enum {
CLUTTER_INIT_SUCCESS = 1,
2007-08-07 10:03:58 -04:00
CLUTTER_INIT_ERROR_UNKNOWN = 0,
CLUTTER_INIT_ERROR_THREADS = -1,
CLUTTER_INIT_ERROR_BACKEND = -2,
2007-03-22 Emmanuele Bassi <ebassi@openedhand.com> * clutter/clutter-private.h: Remove inclusion of backend-specific headers; update the main context object; add the declarations for the event queue functions. * clutter/clutter-backend.[ch]: Add the abstract ClutterBackend object, which holds backend-specific settings, the main stage, and the event queue. Every backend must implement a subclass of ClutterBackend and ClutterStage. * clutter/clutter-feature.c: Protect the GLX specific calls behing #ifdef HAVE_CLUTTER_GLX. * clutter/clutter-actor.c: * clutter/clutter-group.c: * clutter/clutter-clone-texture.c: Include GL/gl.h * clutter/clutter-event.[ch]: Update public API and implement the event queue private API; hold a reference on the event objects; move out the keysym-to-unicode table; add the new event types. * clutter/clutter-color.h: Include clutter-fixed.h * clutter/clutter-main.c: Update API; get the main stage from the backend object; process the event received from the queue; lock/unlock the main mutex if we have one; move the initialisation process sooner in the init sequence, in order to have the backend object when we check for options; call the backed vfuncs in the pre/post parse hooks. * clutter/clutter-stage.c: Make ClutterStage and abstract class, implemented by the backends. * clutter/clutter/glx/clutter-glx.h: * clutter/clutter/glx/clutter-backend-glx.[ch]: * clutter/clutter/glx/clutter-event-glx.c: * clutter/clutter/glx/clutter-stage-glx.[ch]: * clutter/clutter/glx/Makefile.am: Add the GLX backend. * clutter/clutter/egl/clutter-backend-egl.[ch]: * clutter/clutter/egl/clutter-event-egl.c: * clutter/clutter/egl/clutter-stage-egl.[ch]: * clutter/clutter/egl/Makefile.am: Add the stub for a EGL backend. * examples/*.c: Update for the new API.
2007-03-22 14:21:59 -04:00
CLUTTER_INIT_ERROR_INTERNAL = -3
} ClutterInitError;
2006-11-21 Emmanuele Bassi <ebassi@openedhand.com> * configure.ac: Enable debug messages also when --enable-debug is set to "minimum". * clutter/Makefile.am: * clutter/clutter-debug.h: Move all debugging macros inside this private header; make all debug macros depend on the CLUTTER_ENABLE_DEBUG compile time define, controlled by the --enable-debug configure switch; add G_LOG_DOMAIN define. * clutter/clutter-main.c: Clean up the debug stuff; add command line argument parsing using GOption; the debug messages now are triggered like this: CLUTTER_DEBUG=section:section:... clutter-app or like this: clutter-app --clutter-debug=section:section:... where "section" is one of the sections listed in clutter-main.c, or "all", for all sections; each section is bound to a flag, which can be used to define a domain when adding a debug note using the CLUTTER_NOTE() macro; the old CLUTTER_DBG() macro is just a wrapper around that, under the CLUTTER_DEBUG_MISC domain; CLUTTER_NOTE() is used like this: CLUTTER_NOTE (DOMAIN, log-function); where log function is g_printerr(), g_message(), g_warning(), g_critical() or directly g_log() - for instance: CLUTTER_NOTE (PANGO, g_warning ("Cache miss: %d", glyph)); will print the warning only if the "pango" flag has been set to the CLUTTER_DEBUG envvar or passed to the --clutter-debug command line argument. similar to CLUTTER_SHOW_FPS, there's also the --clutter-show-fps command line switch; also, the --display and --screen command line switches have been added: the first overrides the DISPLAY envvar and the second controls the X screen used by Clutter to get the root window on the display. * clutter/clutter-main.h: * clutter/clutter-main.c: Add extended support for GOption in Clutter; use clutter_init_with_args() to let Clutter parse your own command line arguments; use instead clutter_get_option_group() to get the GOptionGroup used by Clutter if you want to do the parsing yourself with g_option_context_parse(). The init sequence has been verified, updated and moved into common functions where possible. * clutter/pango/pangoclutter-render.c: * clutter/*.c: Include "clutter-debug.h" where needed; use CLUTTER_NOTE() instead of CLUTTER_DBG(). * examples/super-oh.c: Use the new clutter_init_with_args() function, and add a --num-hands command line switch to the SuperOH example code controlling the number of hands at runtime.
2006-11-21 16:27:53 -05:00
GQuark clutter_init_error_quark (void);
/**
* CLUTTER_PRIORITY_REDRAW:
*
* Priority of the redraws. This is chosen to be lower than the GTK+
* redraw and resize priorities, because in application with both
* GTK+ and Clutter it's more likely that the Clutter part will be
* continually animating (and thus able to starve GTK+) than
* vice-versa.
*
* Since: 0.8
*/
#define CLUTTER_PRIORITY_REDRAW (G_PRIORITY_HIGH_IDLE + 50)
2007-08-08 06:20:14 -04:00
/* Initialisation */
void clutter_base_init (void);
2006-11-21 Emmanuele Bassi <ebassi@openedhand.com> * configure.ac: Enable debug messages also when --enable-debug is set to "minimum". * clutter/Makefile.am: * clutter/clutter-debug.h: Move all debugging macros inside this private header; make all debug macros depend on the CLUTTER_ENABLE_DEBUG compile time define, controlled by the --enable-debug configure switch; add G_LOG_DOMAIN define. * clutter/clutter-main.c: Clean up the debug stuff; add command line argument parsing using GOption; the debug messages now are triggered like this: CLUTTER_DEBUG=section:section:... clutter-app or like this: clutter-app --clutter-debug=section:section:... where "section" is one of the sections listed in clutter-main.c, or "all", for all sections; each section is bound to a flag, which can be used to define a domain when adding a debug note using the CLUTTER_NOTE() macro; the old CLUTTER_DBG() macro is just a wrapper around that, under the CLUTTER_DEBUG_MISC domain; CLUTTER_NOTE() is used like this: CLUTTER_NOTE (DOMAIN, log-function); where log function is g_printerr(), g_message(), g_warning(), g_critical() or directly g_log() - for instance: CLUTTER_NOTE (PANGO, g_warning ("Cache miss: %d", glyph)); will print the warning only if the "pango" flag has been set to the CLUTTER_DEBUG envvar or passed to the --clutter-debug command line argument. similar to CLUTTER_SHOW_FPS, there's also the --clutter-show-fps command line switch; also, the --display and --screen command line switches have been added: the first overrides the DISPLAY envvar and the second controls the X screen used by Clutter to get the root window on the display. * clutter/clutter-main.h: * clutter/clutter-main.c: Add extended support for GOption in Clutter; use clutter_init_with_args() to let Clutter parse your own command line arguments; use instead clutter_get_option_group() to get the GOptionGroup used by Clutter if you want to do the parsing yourself with g_option_context_parse(). The init sequence has been verified, updated and moved into common functions where possible. * clutter/pango/pangoclutter-render.c: * clutter/*.c: Include "clutter-debug.h" where needed; use CLUTTER_NOTE() instead of CLUTTER_DBG(). * examples/super-oh.c: Use the new clutter_init_with_args() function, and add a --num-hands command line switch to the SuperOH example code controlling the number of hands at runtime.
2006-11-21 16:27:53 -05:00
ClutterInitError clutter_init (int *argc,
char ***argv);
ClutterInitError clutter_init_with_args (int *argc,
char ***argv,
const char *parameter_string,
2006-11-21 Emmanuele Bassi <ebassi@openedhand.com> * configure.ac: Enable debug messages also when --enable-debug is set to "minimum". * clutter/Makefile.am: * clutter/clutter-debug.h: Move all debugging macros inside this private header; make all debug macros depend on the CLUTTER_ENABLE_DEBUG compile time define, controlled by the --enable-debug configure switch; add G_LOG_DOMAIN define. * clutter/clutter-main.c: Clean up the debug stuff; add command line argument parsing using GOption; the debug messages now are triggered like this: CLUTTER_DEBUG=section:section:... clutter-app or like this: clutter-app --clutter-debug=section:section:... where "section" is one of the sections listed in clutter-main.c, or "all", for all sections; each section is bound to a flag, which can be used to define a domain when adding a debug note using the CLUTTER_NOTE() macro; the old CLUTTER_DBG() macro is just a wrapper around that, under the CLUTTER_DEBUG_MISC domain; CLUTTER_NOTE() is used like this: CLUTTER_NOTE (DOMAIN, log-function); where log function is g_printerr(), g_message(), g_warning(), g_critical() or directly g_log() - for instance: CLUTTER_NOTE (PANGO, g_warning ("Cache miss: %d", glyph)); will print the warning only if the "pango" flag has been set to the CLUTTER_DEBUG envvar or passed to the --clutter-debug command line argument. similar to CLUTTER_SHOW_FPS, there's also the --clutter-show-fps command line switch; also, the --display and --screen command line switches have been added: the first overrides the DISPLAY envvar and the second controls the X screen used by Clutter to get the root window on the display. * clutter/clutter-main.h: * clutter/clutter-main.c: Add extended support for GOption in Clutter; use clutter_init_with_args() to let Clutter parse your own command line arguments; use instead clutter_get_option_group() to get the GOptionGroup used by Clutter if you want to do the parsing yourself with g_option_context_parse(). The init sequence has been verified, updated and moved into common functions where possible. * clutter/pango/pangoclutter-render.c: * clutter/*.c: Include "clutter-debug.h" where needed; use CLUTTER_NOTE() instead of CLUTTER_DBG(). * examples/super-oh.c: Use the new clutter_init_with_args() function, and add a --num-hands command line switch to the SuperOH example code controlling the number of hands at runtime.
2006-11-21 16:27:53 -05:00
GOptionEntry *entries,
const char *translation_domain,
2006-11-21 Emmanuele Bassi <ebassi@openedhand.com> * configure.ac: Enable debug messages also when --enable-debug is set to "minimum". * clutter/Makefile.am: * clutter/clutter-debug.h: Move all debugging macros inside this private header; make all debug macros depend on the CLUTTER_ENABLE_DEBUG compile time define, controlled by the --enable-debug configure switch; add G_LOG_DOMAIN define. * clutter/clutter-main.c: Clean up the debug stuff; add command line argument parsing using GOption; the debug messages now are triggered like this: CLUTTER_DEBUG=section:section:... clutter-app or like this: clutter-app --clutter-debug=section:section:... where "section" is one of the sections listed in clutter-main.c, or "all", for all sections; each section is bound to a flag, which can be used to define a domain when adding a debug note using the CLUTTER_NOTE() macro; the old CLUTTER_DBG() macro is just a wrapper around that, under the CLUTTER_DEBUG_MISC domain; CLUTTER_NOTE() is used like this: CLUTTER_NOTE (DOMAIN, log-function); where log function is g_printerr(), g_message(), g_warning(), g_critical() or directly g_log() - for instance: CLUTTER_NOTE (PANGO, g_warning ("Cache miss: %d", glyph)); will print the warning only if the "pango" flag has been set to the CLUTTER_DEBUG envvar or passed to the --clutter-debug command line argument. similar to CLUTTER_SHOW_FPS, there's also the --clutter-show-fps command line switch; also, the --display and --screen command line switches have been added: the first overrides the DISPLAY envvar and the second controls the X screen used by Clutter to get the root window on the display. * clutter/clutter-main.h: * clutter/clutter-main.c: Add extended support for GOption in Clutter; use clutter_init_with_args() to let Clutter parse your own command line arguments; use instead clutter_get_option_group() to get the GOptionGroup used by Clutter if you want to do the parsing yourself with g_option_context_parse(). The init sequence has been verified, updated and moved into common functions where possible. * clutter/pango/pangoclutter-render.c: * clutter/*.c: Include "clutter-debug.h" where needed; use CLUTTER_NOTE() instead of CLUTTER_DBG(). * examples/super-oh.c: Use the new clutter_init_with_args() function, and add a --num-hands command line switch to the SuperOH example code controlling the number of hands at runtime.
2006-11-21 16:27:53 -05:00
GError **error);
GOptionGroup * clutter_get_option_group (void);
GOptionGroup * clutter_get_option_group_without_init (void);
2006-11-21 Emmanuele Bassi <ebassi@openedhand.com> * configure.ac: Enable debug messages also when --enable-debug is set to "minimum". * clutter/Makefile.am: * clutter/clutter-debug.h: Move all debugging macros inside this private header; make all debug macros depend on the CLUTTER_ENABLE_DEBUG compile time define, controlled by the --enable-debug configure switch; add G_LOG_DOMAIN define. * clutter/clutter-main.c: Clean up the debug stuff; add command line argument parsing using GOption; the debug messages now are triggered like this: CLUTTER_DEBUG=section:section:... clutter-app or like this: clutter-app --clutter-debug=section:section:... where "section" is one of the sections listed in clutter-main.c, or "all", for all sections; each section is bound to a flag, which can be used to define a domain when adding a debug note using the CLUTTER_NOTE() macro; the old CLUTTER_DBG() macro is just a wrapper around that, under the CLUTTER_DEBUG_MISC domain; CLUTTER_NOTE() is used like this: CLUTTER_NOTE (DOMAIN, log-function); where log function is g_printerr(), g_message(), g_warning(), g_critical() or directly g_log() - for instance: CLUTTER_NOTE (PANGO, g_warning ("Cache miss: %d", glyph)); will print the warning only if the "pango" flag has been set to the CLUTTER_DEBUG envvar or passed to the --clutter-debug command line argument. similar to CLUTTER_SHOW_FPS, there's also the --clutter-show-fps command line switch; also, the --display and --screen command line switches have been added: the first overrides the DISPLAY envvar and the second controls the X screen used by Clutter to get the root window on the display. * clutter/clutter-main.h: * clutter/clutter-main.c: Add extended support for GOption in Clutter; use clutter_init_with_args() to let Clutter parse your own command line arguments; use instead clutter_get_option_group() to get the GOptionGroup used by Clutter if you want to do the parsing yourself with g_option_context_parse(). The init sequence has been verified, updated and moved into common functions where possible. * clutter/pango/pangoclutter-render.c: * clutter/*.c: Include "clutter-debug.h" where needed; use CLUTTER_NOTE() instead of CLUTTER_DBG(). * examples/super-oh.c: Use the new clutter_init_with_args() function, and add a --num-hands command line switch to the SuperOH example code controlling the number of hands at runtime.
2006-11-21 16:27:53 -05:00
2007-08-08 06:20:14 -04:00
/* Mainloop */
void clutter_main (void);
void clutter_main_quit (void);
gint clutter_main_level (void);
2007-03-22 Emmanuele Bassi <ebassi@openedhand.com> * clutter/clutter-private.h: Remove inclusion of backend-specific headers; update the main context object; add the declarations for the event queue functions. * clutter/clutter-backend.[ch]: Add the abstract ClutterBackend object, which holds backend-specific settings, the main stage, and the event queue. Every backend must implement a subclass of ClutterBackend and ClutterStage. * clutter/clutter-feature.c: Protect the GLX specific calls behing #ifdef HAVE_CLUTTER_GLX. * clutter/clutter-actor.c: * clutter/clutter-group.c: * clutter/clutter-clone-texture.c: Include GL/gl.h * clutter/clutter-event.[ch]: Update public API and implement the event queue private API; hold a reference on the event objects; move out the keysym-to-unicode table; add the new event types. * clutter/clutter-color.h: Include clutter-fixed.h * clutter/clutter-main.c: Update API; get the main stage from the backend object; process the event received from the queue; lock/unlock the main mutex if we have one; move the initialisation process sooner in the init sequence, in order to have the backend object when we check for options; call the backed vfuncs in the pre/post parse hooks. * clutter/clutter-stage.c: Make ClutterStage and abstract class, implemented by the backends. * clutter/clutter/glx/clutter-glx.h: * clutter/clutter/glx/clutter-backend-glx.[ch]: * clutter/clutter/glx/clutter-event-glx.c: * clutter/clutter/glx/clutter-stage-glx.[ch]: * clutter/clutter/glx/Makefile.am: Add the GLX backend. * clutter/clutter/egl/clutter-backend-egl.[ch]: * clutter/clutter/egl/clutter-event-egl.c: * clutter/clutter/egl/clutter-stage-egl.[ch]: * clutter/clutter/egl/Makefile.am: Add the stub for a EGL backend. * examples/*.c: Update for the new API.
2007-03-22 14:21:59 -04:00
void clutter_redraw (ClutterStage *stage);
2007-03-22 Emmanuele Bassi <ebassi@openedhand.com> * clutter/clutter-private.h: Remove inclusion of backend-specific headers; update the main context object; add the declarations for the event queue functions. * clutter/clutter-backend.[ch]: Add the abstract ClutterBackend object, which holds backend-specific settings, the main stage, and the event queue. Every backend must implement a subclass of ClutterBackend and ClutterStage. * clutter/clutter-feature.c: Protect the GLX specific calls behing #ifdef HAVE_CLUTTER_GLX. * clutter/clutter-actor.c: * clutter/clutter-group.c: * clutter/clutter-clone-texture.c: Include GL/gl.h * clutter/clutter-event.[ch]: Update public API and implement the event queue private API; hold a reference on the event objects; move out the keysym-to-unicode table; add the new event types. * clutter/clutter-color.h: Include clutter-fixed.h * clutter/clutter-main.c: Update API; get the main stage from the backend object; process the event received from the queue; lock/unlock the main mutex if we have one; move the initialisation process sooner in the init sequence, in order to have the backend object when we check for options; call the backed vfuncs in the pre/post parse hooks. * clutter/clutter-stage.c: Make ClutterStage and abstract class, implemented by the backends. * clutter/clutter/glx/clutter-glx.h: * clutter/clutter/glx/clutter-backend-glx.[ch]: * clutter/clutter/glx/clutter-event-glx.c: * clutter/clutter/glx/clutter-stage-glx.[ch]: * clutter/clutter/glx/Makefile.am: Add the GLX backend. * clutter/clutter/egl/clutter-backend-egl.[ch]: * clutter/clutter/egl/clutter-event-egl.c: * clutter/clutter/egl/clutter-stage-egl.[ch]: * clutter/clutter/egl/Makefile.am: Add the stub for a EGL backend. * examples/*.c: Update for the new API.
2007-03-22 14:21:59 -04:00
void clutter_do_event (ClutterEvent *event);
2007-08-08 06:20:14 -04:00
/* Debug utility functions */
gboolean clutter_get_debug_enabled (void);
gboolean clutter_get_show_fps (void);
gulong clutter_get_timestamp (void);
gboolean clutter_get_accessibility_enabled (void);
2007-08-08 06:20:14 -04:00
/* Threading functions */
void clutter_threads_init (void);
void clutter_threads_enter (void);
void clutter_threads_leave (void);
void clutter_threads_set_lock_functions (GCallback enter_fn,
GCallback leave_fn);
guint clutter_threads_add_idle (GSourceFunc func,
gpointer data);
guint clutter_threads_add_idle_full (gint priority,
GSourceFunc func,
gpointer data,
GDestroyNotify notify);
guint clutter_threads_add_timeout (guint interval,
GSourceFunc func,
gpointer data);
guint clutter_threads_add_timeout_full (gint priority,
guint interval,
GSourceFunc func,
gpointer data,
GDestroyNotify notify);
#ifndef CLUTTER_DISABLE_DEPRECATED
guint clutter_threads_add_frame_source (guint fps,
GSourceFunc func,
gpointer data);
guint clutter_threads_add_frame_source_full (gint priority,
guint fps,
GSourceFunc func,
gpointer data,
GDestroyNotify notify);
#endif /* CLUTTER_DISABLE_DEPRECATED */
guint clutter_threads_add_repaint_func (GSourceFunc func,
gpointer data,
GDestroyNotify notify);
void clutter_threads_remove_repaint_func (guint handle_id);
void clutter_set_motion_events_enabled (gboolean enable);
gboolean clutter_get_motion_events_enabled (void);
void clutter_set_default_frame_rate (guint frames_per_sec);
guint clutter_get_default_frame_rate (void);
void clutter_grab_pointer (ClutterActor *actor);
void clutter_ungrab_pointer (void);
ClutterActor * clutter_get_pointer_grab (void);
void clutter_grab_keyboard (ClutterActor *actor);
void clutter_ungrab_keyboard (void);
ClutterActor * clutter_get_keyboard_grab (void);
2008-05-28 Emmanuele Bassi <ebassi@openedhand.com> Bug #919 - Replacement pango renderer (Neil Roberts) * clutter/clutter-backend.h: * clutter/clutter-backend.c: (clutter_backend_set_font_options), (clutter_backend_get_font_options): Add the ability to set the cairo_font_options_t* for the backend at construction time, so that backend implementations can have their own options. * clutter/clutter-color.c: Include pango/pango-attributes.h for the pango_color_parse() function. * clutter/clutter-label.c: (clutter_label_ensure_layout), (clutter_label_init), (clutter_label_set_text), (clutter_label_set_font_name), (clutter_label_set_ellipsize), (clutter_label_set_use_markup): Ensure that the cache is always primed when the Label changes; this makes sure that the cache is rebuilt outside the paint run, which should make the painting perform better especially on embedded devices. * clutter/clutter-entry.c: (clutter_entry_ensure_layout), (clutter_entry_init), (clutter_entry_set_text), (clutter_entry_set_font_name): Ditto as above. * clutter/clutter-private.h: * clutter/clutter-main.[ch]: Create the font-map inside the main context; add two new functions: clutter_clear_glyph_cache() clutter_set_use_mipmapped_text() that control the glyphs cache. * clutter/pango/Makefile.am: * clutter/pango/pangoclutter-fontmap.c: * clutter/pango/pangoclutter-private.h: * clutter/pango/pangoclutter-render.c: * clutter/pango/pangoclutter.h: Rewrite the Pango renderer using a PangoCairo context and saving the glyphs inside a more efficient cache. * configure.ac: Depend on pangocairo instead of pangoft2.
2008-05-28 10:03:28 -04:00
void clutter_clear_glyph_cache (void);
void clutter_set_font_flags (ClutterFontFlags flags);
ClutterFontFlags clutter_get_font_flags (void);
2008-05-28 Emmanuele Bassi <ebassi@openedhand.com> Bug #919 - Replacement pango renderer (Neil Roberts) * clutter/clutter-backend.h: * clutter/clutter-backend.c: (clutter_backend_set_font_options), (clutter_backend_get_font_options): Add the ability to set the cairo_font_options_t* for the backend at construction time, so that backend implementations can have their own options. * clutter/clutter-color.c: Include pango/pango-attributes.h for the pango_color_parse() function. * clutter/clutter-label.c: (clutter_label_ensure_layout), (clutter_label_init), (clutter_label_set_text), (clutter_label_set_font_name), (clutter_label_set_ellipsize), (clutter_label_set_use_markup): Ensure that the cache is always primed when the Label changes; this makes sure that the cache is rebuilt outside the paint run, which should make the painting perform better especially on embedded devices. * clutter/clutter-entry.c: (clutter_entry_ensure_layout), (clutter_entry_init), (clutter_entry_set_text), (clutter_entry_set_font_name): Ditto as above. * clutter/clutter-private.h: * clutter/clutter-main.[ch]: Create the font-map inside the main context; add two new functions: clutter_clear_glyph_cache() clutter_set_use_mipmapped_text() that control the glyphs cache. * clutter/pango/Makefile.am: * clutter/pango/pangoclutter-fontmap.c: * clutter/pango/pangoclutter-private.h: * clutter/pango/pangoclutter-render.c: * clutter/pango/pangoclutter.h: Rewrite the Pango renderer using a PangoCairo context and saving the glyphs inside a more efficient cache. * configure.ac: Depend on pangocairo instead of pangoft2.
2008-05-28 10:03:28 -04:00
ClutterInputDevice *clutter_get_input_device_for_id (gint id_);
void clutter_grab_pointer_for_device (ClutterActor *actor,
gint id_);
void clutter_ungrab_pointer_for_device (gint id_);
PangoFontMap * clutter_get_font_map (void);
ClutterTextDirection clutter_get_default_text_direction (void);
G_END_DECLS
2006-05-29 04:59:36 -04:00
#endif /* _CLUTTER_MAIN_H__ */