isa/mutter
1
0
Fork 0
mirror of https://github.com/brl/mutter.git synced 2024-12-12 06:10:17 +00:00
Code Issues Packages Projects Releases Wiki Activity
63fd426b4b
mutter/cogl/cogl-journal.c

846 lines
29 KiB
C
Raw Normal View History

[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
/*
* Cogl
*
* An object oriented GL/GLES Abstraction/Utility Layer
*
* Copyright (C) 2007,2008,2009 Intel Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
Remove mentions of the FSF address Since using addresses that might change is something that finally the FSF acknowledge as a plausible scenario (after changing address twice), the license blurb in the source files should use the URI for getting the license in case the library did not come with it. Not that URIs cannot possibly change, but at least it's easier to set up a redirection at the same place. As a side note: this commit closes the oldes bug in Clutter's bug report tool. http://bugzilla.openedhand.com/show_bug.cgi?id=521
2010-03-01 12:56:10 +00:00
* License along with this library. If not, see <http://www.gnu.org/licenses/>.
*
*
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "cogl.h"
cogl: don't include cogl-debug.h in cogl.h or install cogl-debug.h is an internal header so it shouldn't have been included by cogl.h and the header shouldn't be installed either.
2010-07-25 20:36:41 +00:00
#include "cogl-debug.h"
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
#include "cogl-internal.h"
#include "cogl-context.h"
#include "cogl-journal-private.h"
#include "cogl-texture-private.h"
#include "cogl-material-private.h"
material: splits out all the state flushing code This moves the code supporting _cogl_material_flush_gl_state into cogl-material-opengl.c as part of an effort to reduce the size of cogl-material.c to keep it manageable.
2010-07-10 02:40:47 +00:00
#include "cogl-material-opengl-private.h"
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
#include "cogl-vertex-buffer-private.h"
cogl: deprecate cogl_draw_buffer API and replace with a cogl_framebuffer API cogl_push_draw_buffer, cogl_set_draw_buffer and cogl_pop_draw_buffer are now deprecated and new code should use the new cogl_framebuffer_* API instead. Code that previously did: cogl_push_draw_buffer (); cogl_set_draw_buffer (COGL_OFFSCREEN_BUFFER, buffer); /* draw */ cogl_pop_draw_buffer (); should now be re-written as: cogl_push_framebuffer (buffer); /* draw */ cogl_pop_framebuffer (); As can be seen from the example above the rename has been used as an opportunity to remove the redundant target argument from cogl_set_draw_buffer; it now only takes one call to redirect to an offscreen buffer, and finally the term framebuffer may be a bit more familiar to anyone coming from an OpenGL background.
2009-11-26 19:06:35 +00:00
#include "cogl-framebuffer-private.h"
profiling: Adds initial UProf accounting to Cogl This adds gives Cogl a dedicated UProf context which will be linked together with Clutter's context during clutter_init_real(). Initial timers cover _cogl_journal_flush and _cogl_journal_log_quad You can explicitly ask for a report of Cogl statistics by exporting COGL_PROFILE_OUTPUT_REPORT=1 but since the context is linked with Clutter's the statisitcs will also be shown in the automatic Clutter reports.
2009-07-03 15:22:35 +00:00
#include "cogl-profile.h"
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
#include <string.h>
#include <gmodule.h>
#include <math.h>
#define _COGL_MAX_BEZ_RECURSE_DEPTH 16
#ifdef HAVE_COGL_GL
cogl: Make it easier to add checks for GL extensions Previously if you need to depend on a new GL feature you had to: - Add typedefs for all of the functions in cogl-defines.h.in - Add function pointers for each of the functions in cogl-context-driver.h - Add an initializer for the function pointers in cogl-context-driver.c - Add a check for the extension and all of the functions in cogl_features_init. If the extension is available under multiple names then you have to duplicate the checks. This is quite tedious and error prone. This patch moves all of the features and their functions into a list of macro invocations in cogl-feature-functions.h. The macros can be redefined to implement all of the above tasks from the same header. The features are described in a struct with a pointer to a table of functions. A new function takes the feature description from this struct and checks for its availability. The feature can take a list of extension names with a list of alternate namespaces (such as "EXT" or "ARB"). It can also detect the feature from a particular version of GL. The typedefs are now gone and instead the function pointer in the Cogl context just directly contains the type. Some of the functions in the context were previously declared with the 'ARB' extension. This has been removed so that now all the functions have no suffix. This makes more sense when the extension could potentially be merged into GL core as well.
2009-11-17 13:52:40 +00:00
#define glGenBuffers ctx->drv.pf_glGenBuffers
#define glBindBuffer ctx->drv.pf_glBindBuffer
#define glBufferData ctx->drv.pf_glBufferData
#define glBufferSubData ctx->drv.pf_glBufferSubData
#define glDeleteBuffers ctx->drv.pf_glDeleteBuffers
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
#define glClientActiveTexture ctx->drv.pf_glClientActiveTexture
#elif defined (HAVE_COGL_GLES2)
#include "../gles/cogl-gles2-wrapper.h"
#endif
/* XXX NB:
* Our journal's vertex data is arranged as follows:
* 4 vertices per quad:
* 2 or 3 GLfloats per position (3 when doing software transforms)
* 4 RGBA GLubytes,
* 2 GLfloats per tex coord * n_layers
*
* Where n_layers corresponds to the number of material layers enabled
*
* To avoid frequent changes in the stride of our vertex data we always pad
* n_layers to be >= 2
*
* When we are transforming quads in software we need to also track the z
* coordinate of transformed vertices.
*
* So for a given number of layers this gets the stride in 32bit words:
*/
#define SW_TRANSFORM (!(cogl_debug_flags & \
COGL_DEBUG_DISABLE_SOFTWARE_TRANSFORM))
#define POS_STRIDE (SW_TRANSFORM ? 3 : 2) /* number of 32bit words */
#define N_POS_COMPONENTS POS_STRIDE
#define COLOR_STRIDE 1 /* number of 32bit words */
#define TEX_STRIDE 2 /* number of 32bit words */
#define MIN_LAYER_PADING 2
#define GET_JOURNAL_VB_STRIDE_FOR_N_LAYERS(N_LAYERS) \
(POS_STRIDE + COLOR_STRIDE + \
TEX_STRIDE * (N_LAYERS < MIN_LAYER_PADING ? MIN_LAYER_PADING : N_LAYERS))
typedef CoglVertexBufferIndices CoglJournalIndices;
typedef struct _CoglJournalFlushState
{
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
gsize stride;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
/* Note: this is a pointer to handle fallbacks. It normally holds a VBO
* offset, but when the driver doesn't support VBOs then this points into
* our GArray of logged vertices. */
char * vbo_offset;
GLuint vertex_offset;
#ifndef HAVE_COGL_GL
CoglJournalIndices *indices;
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
gsize indices_type_size;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
#endif
[current-matrix] Adds texture matrix stacks + removes GL matrix API usage This relates back to an earlier commitment to stop using the OpenGL matrix API which is considered deprecated. (ref 54159f5a1d029db) The new texture matrix stacks are hung from a list of (internal only) CoglTextureUnit structures which the CoglMaterial code internally references via _cogl_get_texure_unit (). So we would be left with only the cogl-matrix-stack code being responsible for glMatrixMode, glLoadMatrix and glLoadIdentity this commit updates the journal code so it now uses the matrix-stack API instead of GL directly.
2009-09-29 01:58:27 +00:00
CoglMatrixStack *modelview_stack;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
} CoglJournalFlushState;
typedef void (*CoglJournalBatchCallback) (CoglJournalEntry *start,
int n_entries,
void *data);
typedef gboolean (*CoglJournalBatchTest) (CoglJournalEntry *entry0,
CoglJournalEntry *entry1);
void
_cogl_journal_dump_quad_vertices (guint8 *data, int n_layers)
{
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
gsize stride = GET_JOURNAL_VB_STRIDE_FOR_N_LAYERS (n_layers);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
int i;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
g_print ("n_layers = %d; stride = %d; pos stride = %d; color stride = %d; "
"tex stride = %d; stride in bytes = %d\n",
n_layers, (int)stride, POS_STRIDE, COLOR_STRIDE,
TEX_STRIDE, (int)stride * 4);
for (i = 0; i < 4; i++)
{
float *v = (float *)data + (i * stride);
guint8 *c = data + (POS_STRIDE * 4) + (i * stride * 4);
int j;
cogl debug: hint that all debugging paths are G_UNLIKELY Most Cogl debugging code conditions are marked as G_UNLIKELY with the intention of having the CPU branch prediction always assume the path is disabled so having debugging support in release binaries has negligible overhead. This patch simply fixes a few cases where we weren't using G_UNLIKELY.
2010-02-17 17:53:28 +00:00
if (G_UNLIKELY (cogl_debug_flags &
COGL_DEBUG_DISABLE_SOFTWARE_TRANSFORM))
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
g_print ("v%d: x = %f, y = %f, rgba=0x%02X%02X%02X%02X",
i, v[0], v[1], c[0], c[1], c[2], c[3]);
else
g_print ("v%d: x = %f, y = %f, z = %f, rgba=0x%02X%02X%02X%02X",
i, v[0], v[1], v[2], c[0], c[1], c[2], c[3]);
for (j = 0; j < n_layers; j++)
{
float *t = v + POS_STRIDE + COLOR_STRIDE + TEX_STRIDE * j;
g_print (", tx%d = %f, ty%d = %f", j, t[0], j, t[1]);
}
g_print ("\n");
}
}
void
_cogl_journal_dump_quad_batch (guint8 *data, int n_layers, int n_quads)
{
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
gsize byte_stride = GET_JOURNAL_VB_STRIDE_FOR_N_LAYERS (n_layers) * 4;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
int i;
g_print ("_cogl_journal_dump_quad_batch: n_layers = %d, n_quads = %d\n",
n_layers, n_quads);
for (i = 0; i < n_quads; i++)
_cogl_journal_dump_quad_vertices (data + byte_stride * 4 * i, n_layers);
}
static void
batch_and_call (CoglJournalEntry *entries,
int n_entries,
CoglJournalBatchTest can_batch_callback,
CoglJournalBatchCallback batch_callback,
void *data)
{
int i;
int batch_len = 1;
CoglJournalEntry *batch_start = entries;
Delay default stage creation The default stage creation should be delayed as much as possible, ideally at the end of the init() process.
2009-12-03 17:13:44 +00:00
if (n_entries < 1)
return;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
for (i = 1; i < n_entries; i++)
{
CoglJournalEntry *entry0 = &entries[i - 1];
CoglJournalEntry *entry1 = entry0 + 1;
if (can_batch_callback (entry0, entry1))
{
batch_len++;
continue;
}
batch_callback (batch_start, batch_len, data);
batch_start = entry1;
batch_len = 1;
}
/* The last batch... */
batch_callback (batch_start, batch_len, data);
}
static void
_cogl_journal_flush_modelview_and_entries (CoglJournalEntry *batch_start,
int batch_len,
void *data)
{
CoglJournalFlushState *state = data;
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_BATCHING))
g_print ("BATCHING: modelview batch len = %d\n", batch_len);
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_DISABLE_SOFTWARE_TRANSFORM))
[current-matrix] Adds texture matrix stacks + removes GL matrix API usage This relates back to an earlier commitment to stop using the OpenGL matrix API which is considered deprecated. (ref 54159f5a1d029db) The new texture matrix stacks are hung from a list of (internal only) CoglTextureUnit structures which the CoglMaterial code internally references via _cogl_get_texure_unit (). So we would be left with only the cogl-matrix-stack code being responsible for glMatrixMode, glLoadMatrix and glLoadIdentity this commit updates the journal code so it now uses the matrix-stack API instead of GL directly.
2009-09-29 01:58:27 +00:00
{
_cogl_matrix_stack_set (state->modelview_stack,
&batch_start->model_view);
_cogl_matrix_stack_flush_to_gl (state->modelview_stack,
COGL_MATRIX_MODELVIEW);
}
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
#ifdef HAVE_COGL_GL
GE (glDrawArrays (GL_QUADS, state->vertex_offset, batch_len * 4));
#else /* HAVE_COGL_GL */
if (batch_len > 1)
{
int indices_offset = (state->vertex_offset / 4) * 6;
GE (glDrawElements (GL_TRIANGLES,
6 * batch_len,
state->indices->type,
(GLvoid*)(indices_offset * state->indices_type_size)));
}
else
{
GE (glDrawArrays (GL_TRIANGLE_FAN,
state->vertex_offset, /* first */
4)); /* n vertices */
}
#endif
cogl: Use the colours of COGL_DEBUG=rectangles to debug batching Instead of assigning a new colour to each quad of a batch, the rectangle debugging code now assigns a new colour to each batch so that it can be used to visually see what is being batched. The colour is stored in a global variable that is reset during cogl_clear. This improves the chances that the same colour will be used for a batch in the next frames to avoid flickering.
2010-01-22 18:14:57 +00:00
/* DEBUGGING CODE XXX: This path will cause all rectangles to be
* drawn with a coloured outline. Each batch will be rendered with
* the same color. This may e.g. help with debugging texture slicing
* issues, visually seeing what is batched and debugging blending
* issues, plus it looks quite cool.
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
*/
cogl debug: hint that all debugging paths are G_UNLIKELY Most Cogl debugging code conditions are marked as G_UNLIKELY with the intention of having the CPU branch prediction always assume the path is disabled so having debugging support in release binaries has negligible overhead. This patch simply fixes a few cases where we weren't using G_UNLIKELY.
2010-02-17 17:53:28 +00:00
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_RECTANGLES))
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
{
static CoglHandle outline = COGL_INVALID_HANDLE;
cogl: Use the colours of COGL_DEBUG=rectangles to debug batching Instead of assigning a new colour to each quad of a batch, the rectangle debugging code now assigns a new colour to each batch so that it can be used to visually see what is being batched. The colour is stored in a global variable that is reset during cogl_clear. This improves the chances that the same colour will be used for a batch in the next frames to avoid flickering.
2010-01-22 18:14:57 +00:00
guint8 color_intensity;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
int i;
cogl: Use the colours of COGL_DEBUG=rectangles to debug batching Instead of assigning a new colour to each quad of a batch, the rectangle debugging code now assigns a new colour to each batch so that it can be used to visually see what is being batched. The colour is stored in a global variable that is reset during cogl_clear. This improves the chances that the same colour will be used for a batch in the next frames to avoid flickering.
2010-01-22 18:14:57 +00:00
_COGL_GET_CONTEXT (ctxt, NO_RETVAL);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
if (outline == COGL_INVALID_HANDLE)
outline = cogl_material_new ();
cogl: Use the colours of COGL_DEBUG=rectangles to debug batching Instead of assigning a new colour to each quad of a batch, the rectangle debugging code now assigns a new colour to each batch so that it can be used to visually see what is being batched. The colour is stored in a global variable that is reset during cogl_clear. This improves the chances that the same colour will be used for a batch in the next frames to avoid flickering.
2010-01-22 18:14:57 +00:00
/* The least significant three bits represent the three
components so that the order of colours goes red, green,
yellow, blue, magenta, cyan. Black and white are skipped. The
next two bits give four scales of intensity for those colours
in the order 0xff, 0xcc, 0x99, and 0x66. This gives a total
of 24 colours. If there are more than 24 batches on the stage
then it will wrap around */
color_intensity = 0xff - 0x33 * (ctxt->journal_rectangles_color >> 3);
cogl_material_set_color4ub (outline,
(ctxt->journal_rectangles_color & 1) ?
color_intensity : 0,
(ctxt->journal_rectangles_color & 2) ?
color_intensity : 0,
(ctxt->journal_rectangles_color & 4) ?
color_intensity : 0,
0xff);
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
_cogl_material_flush_gl_state (outline, FALSE);
cogl: rename cogl_enable to _cogl_enable Every now and then someone sees the cogl_enable API and gets confused, thinking its public API so this renames the symbol to be clear that it's is an internal only API.
2010-03-19 09:16:08 +00:00
_cogl_enable (COGL_ENABLE_VERTEX_ARRAY);
cogl: Use the colours of COGL_DEBUG=rectangles to debug batching Instead of assigning a new colour to each quad of a batch, the rectangle debugging code now assigns a new colour to each batch so that it can be used to visually see what is being batched. The colour is stored in a global variable that is reset during cogl_clear. This improves the chances that the same colour will be used for a batch in the next frames to avoid flickering.
2010-01-22 18:14:57 +00:00
for (i = 0; i < batch_len; i++)
GE( glDrawArrays (GL_LINE_LOOP, 4 * i + state->vertex_offset, 4) );
/* Go to the next color */
do
ctxt->journal_rectangles_color = ((ctxt->journal_rectangles_color + 1) &
((1 << 5) - 1));
/* We don't want to use black or white */
while ((ctxt->journal_rectangles_color & 0x07) == 0
|| (ctxt->journal_rectangles_color & 0x07) == 0x07);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
}
state->vertex_offset += (4 * batch_len);
}
static gboolean
compare_entry_modelviews (CoglJournalEntry *entry0,
CoglJournalEntry *entry1)
{
/* Batch together quads with the same model view matrix */
/* FIXME: this is nasty, there are much nicer ways to track this
* (at the add_quad_vertices level) without resorting to a memcmp!
*
* E.g. If the cogl-current-matrix code maintained an "age" for
* the modelview matrix we could simply check in add_quad_vertices
* if the age has increased, and if so record the change as a
* boolean in the journal.
*/
if (memcmp (&entry0->model_view, &entry1->model_view,
sizeof (GLfloat) * 16) == 0)
return TRUE;
else
return FALSE;
}
/* At this point we have a run of quads that we know have compatible
* materials, but they may not all have the same modelview matrix */
static void
_cogl_journal_flush_material_and_entries (CoglJournalEntry *batch_start,
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
int batch_len,
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
void *data)
{
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
unsigned long enable_flags = 0;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_BATCHING))
g_print ("BATCHING: material batch len = %d\n", batch_len);
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
_cogl_material_flush_gl_state (batch_start->material, TRUE);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
if (ctx->enable_backface_culling)
enable_flags |= COGL_ENABLE_BACKFACE_CULLING;
enable_flags |= COGL_ENABLE_VERTEX_ARRAY;
enable_flags |= COGL_ENABLE_COLOR_ARRAY;
cogl: rename cogl_enable to _cogl_enable Every now and then someone sees the cogl_enable API and gets confused, thinking its public API so this renames the symbol to be clear that it's is an internal only API.
2010-03-19 09:16:08 +00:00
_cogl_enable (enable_flags);
[cogl] Use clockwise face winding for offscreen buffers with culling enabled Because Cogl defines the origin for texture as top left and offscreen draw buffers can be used to render to textures, we (internally) force all offscreen rendering to be upside down. (because OpenGL defines the origin to be bottom left) By forcing the users scene to be rendered upside down though we also reverse the winding order of all the drawn triangles which may interfere with the users use of backface culling. This patch ensures that we reverse the winding order for a front face (if culling is in use) while rendering offscreen so we don't conflict with the users back face culling.
2009-10-22 18:01:52 +00:00
_cogl_flush_face_winding ();
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
/* If we haven't transformed the quads in software then we need to also break
* up batches according to changes in the modelview matrix... */
cogl debug: hint that all debugging paths are G_UNLIKELY Most Cogl debugging code conditions are marked as G_UNLIKELY with the intention of having the CPU branch prediction always assume the path is disabled so having debugging support in release binaries has negligible overhead. This patch simply fixes a few cases where we weren't using G_UNLIKELY.
2010-02-17 17:53:28 +00:00
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_DISABLE_SOFTWARE_TRANSFORM))
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
{
batch_and_call (batch_start,
batch_len,
compare_entry_modelviews,
_cogl_journal_flush_modelview_and_entries,
data);
}
else
_cogl_journal_flush_modelview_and_entries (batch_start, batch_len, data);
}
static gboolean
compare_entry_materials (CoglJournalEntry *entry0, CoglJournalEntry *entry1)
{
/* batch rectangles using compatible materials */
/* XXX: _cogl_material_equal may give false negatives since it avoids
* deep comparisons as an optimization. It aims to compare enough so
* that we that we are able to batch the 90% common cases, but may not
* look at less common differences. */
if (_cogl_material_equal (entry0->material,
entry1->material,
CoglMaterial: Implements sparse materials design This is a complete overhaul of the data structures used to manage CoglMaterial state. We have these requirements that were aiming to meet: (Note: the references to "renderlists" correspond to the effort to support scenegraph level shuffling of Clutter actor primitives so we can minimize GPU state changes) Sparse State: We wanted a design that allows sparse descriptions of state so it scales well as we make CoglMaterial responsible for more and more state. It needs to scale well in terms of memory usage and the cost of operations we need to apply to materials such as comparing, copying and flushing their state. I.e. we would rather have these things scale by the number of real changes a material represents not by how much overall state CoglMaterial becomes responsible for. Cheap Copies: As we add support for renderlists in Clutter we will need to be able to get an immutable handle for a given material's current state so that we can retain a record of a primitive with its associated material without worrying that changes to the original material will invalidate that record. No more flush override options: We want to get rid of the flush overrides mechanism we currently use to deal with texture fallbacks, wrap mode changes and to handle the use of highlevel CoglTextures that need to be resolved into lowlevel textures before flushing the material state. The flush options structure has been expanding in size and the structure is logged with every journal entry so it is not an approach that scales well at all. It also makes flushing material state that much more complex. Weak Materials: Again for renderlists we need a way to create materials derived from other materials but without the strict requirement that modifications to the original material wont affect the derived ("weak") material. The only requirement is that its possible to later check if the original material has been changed. A summary of the new design: A CoglMaterial now basically represents a diff against its parent. Each material has a single parent and a mask of state that it changes. Each group of state (such as the blending state) has an "authority" which is found by walking up from a given material through its ancestors checking the difference mask until a match for that group is found. There is only one root node to the graph of all materials, which is the default material first created when Cogl is being initialized. All the groups of state are divided into two types, such that infrequently changed state belongs in a separate "BigState" structure that is only allocated and attached to a material when necessary. CoglMaterialLayers are another sparse structure. Like CoglMaterials they represent a diff against their parent and all the layers are part of another graph with the "default_layer_0" layer being the root node that Cogl creates during initialization. Copying a material is now basically just a case of slice allocating a CoglMaterial, setting the parent to be the source being copied and zeroing the mask of changes. Flush overrides should now be handled by simply relying on the cheapness of copying a material and making changes to it. (This will be done in a follow on commit) Weak material support will be added in a follow on commit.
2010-04-08 11:21:04 +00:00
TRUE))
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
return TRUE;
else
return FALSE;
}
/* Since the stride may not reflect the number of texture layers in use
* (due to padding) we deal with texture coordinate offsets separately
* from vertex and color offsets... */
static void
_cogl_journal_flush_texcoord_vbo_offsets_and_entries (
CoglJournalEntry *batch_start,
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
int batch_len,
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
void *data)
{
CoglJournalFlushState *state = data;
int i;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
for (i = 0; i < batch_start->n_layers; i++)
{
GE (glClientActiveTexture (GL_TEXTURE0 + i));
GE (glEnableClientState (GL_TEXTURE_COORD_ARRAY));
/* XXX NB:
* Our journal's vertex data is arranged as follows:
* 4 vertices per quad:
* 2 or 3 GLfloats per position (3 when doing software transforms)
* 4 RGBA GLubytes,
* 2 GLfloats per tex coord * n_layers
* (though n_layers may be padded; see definition of
* GET_JOURNAL_VB_STRIDE_FOR_N_LAYERS for details)
*/
GE (glTexCoordPointer (2, GL_FLOAT, state->stride,
(void *)(state->vbo_offset +
(POS_STRIDE + COLOR_STRIDE) * 4 +
TEX_STRIDE * 4 * i)));
}
cogl-vertex-buffer: Don't disable layers with no texture coords It should be quite acceptable to use a texture without defining any texture coords. For example a shader may be in use that is doing texture lookups without referencing the texture coordinates. Also it should be possible to replace the vertex colors using a texture layer without a texture but with a constant layer color. enable_state_for_drawing_buffer no longer sets any disabled layers in the overrides. Instead of counting the number of units with texture coordinates it now keeps them in a mask. This means there can now be gaps in the list of enabled texture coordinate arrays. To cope with this, the Cogl context now also stores a mask to track the enabled arrays. Instead of code manually iterating each enabled array to disable them, there is now an internal function called _cogl_disable_texcoord_arrays which disables a given mask. I think this could also fix potential bugs when a vertex buffer has gaps in the texture coordinate attributes that it provides. For example if the vertex buffer only had texture coordinates for layer 2 then the disabling code would not disable the coordinates for layers 0 and 1 even though they are not used. This could cause a crash if the previous data for those arrays is no longer valid. http://bugzilla.openedhand.com/show_bug.cgi?id=2132
2010-05-19 23:16:49 +00:00
cogl: Use a CoglBitmask to store the list of used texcoord arrays Instead of directly using a guint32 to store a bitmask for each used texcoord array, it now stores them in a CoglBitmask. This removes the limitation of 32 layers (although there are still other places in Cogl that imply this restriction). To disable texcoord arrays code should call _cogl_disable_other_texcoord_arrays which takes a bitmask of texcoord arrays that should not be disabled. There are two extra bitmasks stored in the CoglContext which are used temporarily for this function to avoid allocating a new bitmask each time. http://bugzilla.openedhand.com/show_bug.cgi?id=2132
2010-05-24 11:40:11 +00:00
_cogl_bitmask_clear_all (&ctx->temp_bitmask);
_cogl_bitmask_set_range (&ctx->temp_bitmask, batch_start->n_layers, TRUE);
_cogl_disable_other_texcoord_arrays (&ctx->temp_bitmask);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
batch_and_call (batch_start,
batch_len,
compare_entry_materials,
_cogl_journal_flush_material_and_entries,
data);
}
static gboolean
compare_entry_n_layers (CoglJournalEntry *entry0, CoglJournalEntry *entry1)
{
if (entry0->n_layers == entry1->n_layers)
return TRUE;
else
return FALSE;
}
/* At this point we know the stride has changed from the previous batch
* of journal entries */
static void
_cogl_journal_flush_vbo_offsets_and_entries (CoglJournalEntry *batch_start,
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
int batch_len,
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
void *data)
{
CoglJournalFlushState *state = data;
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
gsize stride;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
#ifndef HAVE_COGL_GL
int needed_indices = batch_len * 6;
CoglHandle indices_handle;
CoglVertexBufferIndices *indices;
#endif
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_BATCHING))
g_print ("BATCHING: vbo offset batch len = %d\n", batch_len);
/* XXX NB:
* Our journal's vertex data is arranged as follows:
* 4 vertices per quad:
* 2 or 3 GLfloats per position (3 when doing software transforms)
* 4 RGBA GLubytes,
* 2 GLfloats per tex coord * n_layers
* (though n_layers may be padded; see definition of
* GET_JOURNAL_VB_STRIDE_FOR_N_LAYERS for details)
*/
stride = GET_JOURNAL_VB_STRIDE_FOR_N_LAYERS (batch_start->n_layers);
stride *= sizeof (GLfloat);
state->stride = stride;
GE (glVertexPointer (N_POS_COMPONENTS, GL_FLOAT, stride,
(void *)state->vbo_offset));
GE (glColorPointer (4, GL_UNSIGNED_BYTE, stride,
(void *)(state->vbo_offset + (POS_STRIDE * 4))));
#ifndef HAVE_COGL_GL
indices_handle = cogl_vertex_buffer_indices_get_for_quads (needed_indices);
indices = _cogl_vertex_buffer_indices_pointer_from_handle (indices_handle);
state->indices = indices;
if (indices->type == GL_UNSIGNED_BYTE)
state->indices_type_size = 1;
else if (indices->type == GL_UNSIGNED_SHORT)
state->indices_type_size = 2;
else
g_critical ("unknown indices type %d", indices->type);
GE (glBindBuffer (GL_ELEMENT_ARRAY_BUFFER,
GPOINTER_TO_UINT (indices->vbo_name)));
#endif
/* We only call gl{Vertex,Color,Texture}Pointer when the stride within
* the VBO changes. (due to a change in the number of material layers)
* While the stride remains constant we walk forward through the above
* VBO using a vertex offset passed to glDraw{Arrays,Elements} */
state->vertex_offset = 0;
cogl debug: hint that all debugging paths are G_UNLIKELY Most Cogl debugging code conditions are marked as G_UNLIKELY with the intention of having the CPU branch prediction always assume the path is disabled so having debugging support in release binaries has negligible overhead. This patch simply fixes a few cases where we weren't using G_UNLIKELY.
2010-02-17 17:53:28 +00:00
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_JOURNAL))
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
{
guint8 *verts;
if (cogl_get_features () & COGL_FEATURE_VBOS)
verts = ((guint8 *)ctx->logged_vertices->data) +
(size_t)state->vbo_offset;
else
verts = (guint8 *)state->vbo_offset;
_cogl_journal_dump_quad_batch (verts,
batch_start->n_layers,
batch_len);
}
batch_and_call (batch_start,
batch_len,
compare_entry_n_layers,
_cogl_journal_flush_texcoord_vbo_offsets_and_entries,
data);
/* progress forward through the VBO containing all our vertices */
state->vbo_offset += (stride * 4 * batch_len);
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_JOURNAL))
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
g_print ("new vbo offset = %lu\n", (unsigned long)state->vbo_offset);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
}
static gboolean
compare_entry_strides (CoglJournalEntry *entry0, CoglJournalEntry *entry1)
{
/* Currently the only thing that affects the stride for our vertex arrays
* is the number of material layers. We need to update our VBO offsets
* whenever the stride changes. */
/* TODO: We should be padding the n_layers == 1 case as if it were
* n_layers == 2 so we can reduce the need to split batches. */
if (entry0->n_layers == entry1->n_layers ||
(entry0->n_layers <= MIN_LAYER_PADING &&
entry1->n_layers <= MIN_LAYER_PADING))
return TRUE;
else
return FALSE;
}
static GLuint
upload_vertices_to_vbo (GArray *vertices, CoglJournalFlushState *state)
{
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
gsize needed_vbo_len;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
GLuint journal_vbo;
_COGL_GET_CONTEXT (ctx, 0);
needed_vbo_len = vertices->len * sizeof (GLfloat);
g_assert (needed_vbo_len);
GE (glGenBuffers (1, &journal_vbo));
GE (glBindBuffer (GL_ARRAY_BUFFER, journal_vbo));
GE (glBufferData (GL_ARRAY_BUFFER,
needed_vbo_len,
vertices->data,
GL_STATIC_DRAW));
/* As we flush the journal entries in batches we walk forward through the
* above VBO starting at offset 0... */
analysis: FALSE/0 used in pointer context While this is totally fine (0 in the pointer context will be converted in the right internal NULL representation, which could be a value with some bits to 1), I believe it's clearer to use NULL in the pointer context. It seems that, in most case, it's more an overlook than a deliberate choice to use FALSE/0 as NULL, eg. copying a _COGL_GET_CONTEXT (ctx, 0) or a g_return_val_if_fail (cond, 0) from a function returning a gboolean.
2010-05-27 07:28:29 +00:00
state->vbo_offset = NULL;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
return journal_vbo;
}
/* XXX NB: When _cogl_journal_flush() returns all state relating
* to materials, all glEnable flags and current matrix state
* is undefined.
*/
void
_cogl_journal_flush (void)
{
CoglJournalFlushState state;
int i;
GLuint journal_vbo;
gboolean vbo_fallback =
(cogl_get_features () & COGL_FEATURE_VBOS) ? FALSE : TRUE;
framebuffer: Replace CoglHandle with CoglFramebuffer * One more object converted to stop using CoglHandle re:a8c8cbee513
2010-07-07 13:41:54 +00:00
CoglFramebuffer *framebuffer;
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
CoglMatrixStack *modelview_stack;
profiling: Adds initial UProf accounting to Cogl This adds gives Cogl a dedicated UProf context which will be linked together with Clutter's context during clutter_init_real(). Initial timers cover _cogl_journal_flush and _cogl_journal_log_quad You can explicitly ask for a report of Cogl statistics by exporting COGL_PROFILE_OUTPUT_REPORT=1 but since the context is linked with Clutter's the statisitcs will also be shown in the automatic Clutter reports.
2009-07-03 15:22:35 +00:00
COGL_STATIC_TIMER (flush_timer,
"Mainloop", /* parent */
"Journal Flush",
"The time spent flushing the Cogl journal",
0 /* no application private data */);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (ctx->journal->len == 0)
return;
profiling: Adds initial UProf accounting to Cogl This adds gives Cogl a dedicated UProf context which will be linked together with Clutter's context during clutter_init_real(). Initial timers cover _cogl_journal_flush and _cogl_journal_log_quad You can explicitly ask for a report of Cogl statistics by exporting COGL_PROFILE_OUTPUT_REPORT=1 but since the context is linked with Clutter's the statisitcs will also be shown in the automatic Clutter reports.
2009-07-03 15:22:35 +00:00
COGL_TIMER_START (_cogl_uprof_context, flush_timer);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_BATCHING))
g_print ("BATCHING: journal len = %d\n", ctx->journal->len);
/* Load all the vertex data we have accumulated so far into a single VBO
* to minimize memory management costs within the GL driver. */
if (!vbo_fallback)
journal_vbo = upload_vertices_to_vbo (ctx->logged_vertices, &state);
else
state.vbo_offset = (char *)ctx->logged_vertices->data;
cogl: deprecate cogl_draw_buffer API and replace with a cogl_framebuffer API cogl_push_draw_buffer, cogl_set_draw_buffer and cogl_pop_draw_buffer are now deprecated and new code should use the new cogl_framebuffer_* API instead. Code that previously did: cogl_push_draw_buffer (); cogl_set_draw_buffer (COGL_OFFSCREEN_BUFFER, buffer); /* draw */ cogl_pop_draw_buffer (); should now be re-written as: cogl_push_framebuffer (buffer); /* draw */ cogl_pop_framebuffer (); As can be seen from the example above the rename has been used as an opportunity to remove the redundant target argument from cogl_set_draw_buffer; it now only takes one call to redirect to an offscreen buffer, and finally the term framebuffer may be a bit more familiar to anyone coming from an OpenGL background.
2009-11-26 19:06:35 +00:00
framebuffer = _cogl_get_framebuffer ();
modelview_stack = _cogl_framebuffer_get_modelview_stack (framebuffer);
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
state.modelview_stack = modelview_stack;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
_cogl_matrix_stack_push (modelview_stack);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
[current-matrix] Adds texture matrix stacks + removes GL matrix API usage This relates back to an earlier commitment to stop using the OpenGL matrix API which is considered deprecated. (ref 54159f5a1d029db) The new texture matrix stacks are hung from a list of (internal only) CoglTextureUnit structures which the CoglMaterial code internally references via _cogl_get_texure_unit (). So we would be left with only the cogl-matrix-stack code being responsible for glMatrixMode, glLoadMatrix and glLoadIdentity this commit updates the journal code so it now uses the matrix-stack API instead of GL directly.
2009-09-29 01:58:27 +00:00
/* If we have transformed all our quads at log time then we ensure no
* further model transform is applied by loading the identity matrix
* here... */
if (G_LIKELY (!(cogl_debug_flags & COGL_DEBUG_DISABLE_SOFTWARE_TRANSFORM)))
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
{
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
_cogl_matrix_stack_load_identity (modelview_stack);
_cogl_matrix_stack_flush_to_gl (modelview_stack, COGL_MATRIX_MODELVIEW);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
}
/* batch_and_call() batches a list of journal entries according to some
* given criteria and calls a callback once for each determined batch.
*
* The process of flushing the journal is staggered to reduce the amount
* of driver/GPU state changes necessary:
* 1) We split the entries according to the stride of the vertices:
* Each time the stride of our vertex data changes we need to call
* gl{Vertex,Color}Pointer to inform GL of new VBO offsets.
* Currently the only thing that affects the stride of our vertex data
* is the number of material layers.
* 2) We split the entries explicitly by the number of material layers:
* We pad our vertex data when the number of layers is < 2 so that we
* can minimize changes in stride. Each time the number of layers
* changes we need to call glTexCoordPointer to inform GL of new VBO
* offsets.
* 3) We then split according to compatible Cogl materials:
* This is where we flush material state
* 4) Finally we split according to modelview matrix changes:
* This is when we finally tell GL to draw something.
* Note: Splitting by modelview changes is skipped when are doing the
* vertex transformation in software at log time.
*/
batch_and_call ((CoglJournalEntry *)ctx->journal->data, /* first entry */
ctx->journal->len, /* max number of entries to consider */
compare_entry_strides,
_cogl_journal_flush_vbo_offsets_and_entries, /* callback */
&state); /* data */
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
_cogl_matrix_stack_pop (modelview_stack);
[current-matrix] Adds texture matrix stacks + removes GL matrix API usage This relates back to an earlier commitment to stop using the OpenGL matrix API which is considered deprecated. (ref 54159f5a1d029db) The new texture matrix stacks are hung from a list of (internal only) CoglTextureUnit structures which the CoglMaterial code internally references via _cogl_get_texure_unit (). So we would be left with only the cogl-matrix-stack code being responsible for glMatrixMode, glLoadMatrix and glLoadIdentity this commit updates the journal code so it now uses the matrix-stack API instead of GL directly.
2009-09-29 01:58:27 +00:00
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
for (i = 0; i < ctx->journal->len; i++)
{
CoglJournalEntry *entry =
&g_array_index (ctx->journal, CoglJournalEntry, i);
_cogl_material_journal_unref (entry->material);
}
if (!vbo_fallback)
GE (glDeleteBuffers (1, &journal_vbo));
g_array_set_size (ctx->journal, 0);
g_array_set_size (ctx->logged_vertices, 0);
profiling: Adds initial UProf accounting to Cogl This adds gives Cogl a dedicated UProf context which will be linked together with Clutter's context during clutter_init_real(). Initial timers cover _cogl_journal_flush and _cogl_journal_log_quad You can explicitly ask for a report of Cogl statistics by exporting COGL_PROFILE_OUTPUT_REPORT=1 but since the context is linked with Clutter's the statisitcs will also be shown in the automatic Clutter reports.
2009-07-03 15:22:35 +00:00
COGL_TIMER_STOP (_cogl_uprof_context, flush_timer);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
}
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
static void
_cogl_journal_init (void)
{
/* Here we flush anything that we know must remain constant until the
* next the the journal is flushed. Note: This lets up flush things
* that themselves depend on the journal, such as clip state. */
/* NB: the journal deals with flushing the modelview stack manually */
cogl: deprecate cogl_draw_buffer API and replace with a cogl_framebuffer API cogl_push_draw_buffer, cogl_set_draw_buffer and cogl_pop_draw_buffer are now deprecated and new code should use the new cogl_framebuffer_* API instead. Code that previously did: cogl_push_draw_buffer (); cogl_set_draw_buffer (COGL_OFFSCREEN_BUFFER, buffer); /* draw */ cogl_pop_draw_buffer (); should now be re-written as: cogl_push_framebuffer (buffer); /* draw */ cogl_pop_framebuffer (); As can be seen from the example above the rename has been used as an opportunity to remove the redundant target argument from cogl_set_draw_buffer; it now only takes one call to redirect to an offscreen buffer, and finally the term framebuffer may be a bit more familiar to anyone coming from an OpenGL background.
2009-11-26 19:06:35 +00:00
_cogl_framebuffer_flush_state (_cogl_get_framebuffer (),
COGL_FRAMEBUFFER_FLUSH_SKIP_MODELVIEW);
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
}
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
void
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
_cogl_journal_log_quad (const float *position,
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
CoglHandle material,
int n_layers,
guint32 fallback_layers,
GLuint layer0_override_texture,
cogl-material: Add support for setting the wrap mode for a layer Previously, Cogl's texture coordinate system was effectively always GL_REPEAT so that if an application specifies coordinates outside the range 0→1 it would get repeated copies of the texture. It would however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates are in the range 0→1 so that in the common case that the whole texture is being drawn with linear filtering it will not blend in edge pixels from the opposite sides. This patch adds the option for applications to change the wrap mode per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge' and 'automatic'. The automatic map mode is the default and it implements the previous behaviour. The wrap mode can be changed for the s and t coordinates independently. I've tried to make the internals support setting the r coordinate but as we don't support 3D textures yet I haven't exposed any public API for it. The texture backends still have a set_wrap_mode virtual but this value is intended to be transitory and it will be changed whenever the material is flushed (although the backends are expected to cache it so that it won't use too many GL calls). In my understanding this value was always meant to be transitory and all primitives were meant to set the value before drawing. However there were comments suggesting that this is not the expected behaviour. In particular the vertex buffer drawing code never set a wrap mode so it would end up with whatever the texture was previously used for. These issues are now fixed because the material will always set the wrap modes. There is code to manually implement clamp-to-edge for textures that can't be hardware repeated. However this doesn't fully work because it relies on being able to draw the stretched parts using quads with the same values for tx1 and tx2. The texture iteration code doesn't support this so it breaks. This is a separate bug and it isn't trivially solved. When flushing a material there are now extra options to set wrap mode overrides. The overrides are an array of values for each layer that specifies an override for the s, t or r coordinates. The primitives use this to implement the automatic wrap mode. cogl_polygon also uses it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced textures. Although this code has been added it looks like the sliced trick has been broken for a while and I haven't attempted to fix it here. I've added a constant to represent the maximum number of layers that a material supports so that I can size the overrides array. I've set it to 32 because as far as I can tell we have that limit imposed anyway because the other flush options use a guint32 to store a flag about each layer. The overrides array ends up adding 32 bytes to each flush options struct which may be a concern. http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-01 10:31:33 +00:00
const CoglMaterialWrapModeOverrides *
wrap_mode_overrides,
cogl: Make the callback for foreach_sub_texture_in_region use const The CoglTextureSliceCallback function pointer now takes const pointers for the texture coordinates. This makes it clearer that the callback should not modify the array and therefore the backend can use the same array for both sets of coords.
2009-12-02 17:17:24 +00:00
const float *tex_coords,
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
unsigned int tex_coords_len)
{
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-10 01:57:32 +00:00
gsize stride;
gsize byte_stride;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
int next_vert;
GLfloat *v;
GLubyte *c;
GLubyte *src_c;
int i;
int next_entry;
guint32 disable_layers;
CoglJournalEntry *entry;
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
CoglHandle source;
CoglMaterialFlushOptions flush_options;
profiling: Adds initial UProf accounting to Cogl This adds gives Cogl a dedicated UProf context which will be linked together with Clutter's context during clutter_init_real(). Initial timers cover _cogl_journal_flush and _cogl_journal_log_quad You can explicitly ask for a report of Cogl statistics by exporting COGL_PROFILE_OUTPUT_REPORT=1 but since the context is linked with Clutter's the statisitcs will also be shown in the automatic Clutter reports.
2009-07-03 15:22:35 +00:00
COGL_STATIC_TIMER (log_timer,
"Mainloop", /* parent */
"Journal Log",
"The time spent logging in the Cogl journal",
0 /* no application private data */);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
profiling: Adds initial UProf accounting to Cogl This adds gives Cogl a dedicated UProf context which will be linked together with Clutter's context during clutter_init_real(). Initial timers cover _cogl_journal_flush and _cogl_journal_log_quad You can explicitly ask for a report of Cogl statistics by exporting COGL_PROFILE_OUTPUT_REPORT=1 but since the context is linked with Clutter's the statisitcs will also be shown in the automatic Clutter reports.
2009-07-03 15:22:35 +00:00
COGL_TIMER_START (_cogl_uprof_context, log_timer);
[draw-buffers] First pass at overhauling Cogl's framebuffer management Cogl's support for offscreen rendering was originally written just to support the clutter_texture_new_from_actor API and due to lack of documentation and several confusing - non orthogonal - side effects of using the API it wasn't really possible to use directly. This commit does a number of things: - It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h} files instead which should be easier to maintain. - internally CoglFbo objects are now called CoglDrawBuffers. A CoglDrawBuffer is an abstract base class that is inherited from to implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw buffers will initially be used to support the cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will start to be used internally to represent windows as we aim to migrate some of Clutter's backend code to Cogl. - It makes draw buffer objects the owners of the following state: - viewport - projection matrix stack - modelview matrix stack - clip state (This means when you switch between draw buffers you will automatically be switching to their associated viewport, matrix and clip state) Aside from hopefully making cogl_offscreen_new_to_texture be more useful short term by having simpler and well defined semantics for cogl_set_draw_buffer, as mentioned above this is the first step for a couple of other things: - Its a step toward moving ownership for windows down from Clutter backends into Cogl, by (internally at least) introducing the CoglOnscreen draw buffer. Note: the plan is that cogl_set_draw_buffer will accept on or offscreen draw buffer handles, and the "target" argument will become redundant since we will instead query the type of the given draw buffer handle. - Because we have a common type for on and offscreen framebuffers we can provide a unified API for framebuffer management. Things like: - blitting between buffers - managing ancillary buffers (e.g. attaching depth and stencil buffers) - size requisition - clearing
2009-09-25 13:34:34 +00:00
if (ctx->logged_vertices->len == 0)
_cogl_journal_init ();
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
/* The vertex data is logged into a separate array in a layout that can be
* directly passed to OpenGL
*/
/* XXX: See definition of GET_JOURNAL_VB_STRIDE_FOR_N_LAYERS for details
* about how we pack our vertex data */
stride = GET_JOURNAL_VB_STRIDE_FOR_N_LAYERS (n_layers);
/* NB: stride is in 32bit words */
byte_stride = stride * 4;
next_vert = ctx->logged_vertices->len;
g_array_set_size (ctx->logged_vertices, next_vert + 4 * stride);
v = &g_array_index (ctx->logged_vertices, GLfloat, next_vert);
c = (GLubyte *)(v + POS_STRIDE);
/* XXX: All the jumping around to fill in this strided buffer doesn't
* seem ideal. */
/* XXX: we could defer expanding the vertex data for GL until we come
* to flushing the journal. */
/* FIXME: This is a hacky optimization, since it will break if we
* change the definition of CoglColor: */
_cogl_material_get_colorubv (material, c);
src_c = c;
for (i = 0; i < 3; i++)
{
c += byte_stride;
memcpy (c, src_c, 4);
}
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
#define X0 0
#define Y0 1
#define X1 2
#define Y1 3
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_DISABLE_SOFTWARE_TRANSFORM))
{
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
v[0] = position[X0]; v[1] = position[Y0];
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
v += stride;
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
v[0] = position[X0]; v[1] = position[Y1];
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
v += stride;
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
v[0] = position[X1]; v[1] = position[Y1];
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
v += stride;
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
v[0] = position[X1]; v[1] = position[Y0];
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
}
else
{
CoglMatrix mv;
float x, y, z, w;
cogl_get_modelview_matrix (&mv);
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
x = position[X0], y = position[Y0], z = 0; w = 1;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
cogl_matrix_transform_point (&mv, &x, &y, &z, &w);
v[0] = x; v[1] = y; v[2] = z;
v += stride;
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
x = position[X0], y = position[Y1], z = 0; w = 1;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
cogl_matrix_transform_point (&mv, &x, &y, &z, &w);
v[0] = x; v[1] = y; v[2] = z;
v += stride;
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
x = position[X1], y = position[Y1], z = 0; w = 1;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
cogl_matrix_transform_point (&mv, &x, &y, &z, &w);
v[0] = x; v[1] = y; v[2] = z;
v += stride;
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
x = position[X1], y = position[Y0], z = 0; w = 1;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
cogl_matrix_transform_point (&mv, &x, &y, &z, &w);
v[0] = x; v[1] = y; v[2] = z;
}
cogl_rectangle: avoid redundant copy of geometry All the cogl_rectangle* APIs normalize their input into into an array of _CoglMutiTexturedRect rectangles and pass these on to our work horse; _cogl_rectangles_with_multitexture_coords. The definition of _CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and y_2 which meant for some common cases we were having to copy out from an array into these members. We are now able to simply point into the users array avoiding a copy which seems desirable when submiting lots of rectangles.
2010-02-11 15:33:01 +00:00
#undef X0
#undef Y0
#undef X1
#undef Y1
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
for (i = 0; i < n_layers; i++)
{
/* XXX: See definition of GET_JOURNAL_VB_STRIDE_FOR_N_LAYERS for details
* about how we pack our vertex data */
GLfloat *t = &g_array_index (ctx->logged_vertices, GLfloat,
next_vert + POS_STRIDE +
COLOR_STRIDE + TEX_STRIDE * i);
journal: Fixes logging of multiple sets of texture coordinates If a user supplied multiple groups of texture coordinates with cogl_rectangle_with_multitexture_coords() then we would repeatedly log only the first group in the journal. This fixes that bug and adds a conformance test to verify the fix. Thanks to Gord Allott for reporting this bug.
2010-01-12 11:02:09 +00:00
t[0] = tex_coords[i * 4 + 0]; t[1] = tex_coords[i * 4 + 1];
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
t += stride;
journal: Fixes logging of multiple sets of texture coordinates If a user supplied multiple groups of texture coordinates with cogl_rectangle_with_multitexture_coords() then we would repeatedly log only the first group in the journal. This fixes that bug and adds a conformance test to verify the fix. Thanks to Gord Allott for reporting this bug.
2010-01-12 11:02:09 +00:00
t[0] = tex_coords[i * 4 + 0]; t[1] = tex_coords[i * 4 + 3];
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
t += stride;
journal: Fixes logging of multiple sets of texture coordinates If a user supplied multiple groups of texture coordinates with cogl_rectangle_with_multitexture_coords() then we would repeatedly log only the first group in the journal. This fixes that bug and adds a conformance test to verify the fix. Thanks to Gord Allott for reporting this bug.
2010-01-12 11:02:09 +00:00
t[0] = tex_coords[i * 4 + 2]; t[1] = tex_coords[i * 4 + 3];
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
t += stride;
journal: Fixes logging of multiple sets of texture coordinates If a user supplied multiple groups of texture coordinates with cogl_rectangle_with_multitexture_coords() then we would repeatedly log only the first group in the journal. This fixes that bug and adds a conformance test to verify the fix. Thanks to Gord Allott for reporting this bug.
2010-01-12 11:02:09 +00:00
t[0] = tex_coords[i * 4 + 2]; t[1] = tex_coords[i * 4 + 1];
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
}
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_JOURNAL))
{
g_print ("Logged new quad:\n");
v = &g_array_index (ctx->logged_vertices, GLfloat, next_vert);
_cogl_journal_dump_quad_vertices ((guint8 *)v, n_layers);
}
next_entry = ctx->journal->len;
g_array_set_size (ctx->journal, next_entry + 1);
entry = &g_array_index (ctx->journal, CoglJournalEntry, next_entry);
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
entry->n_layers = n_layers;
source = material;
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
material: Adds backend abstraction for fragment processing As part of an effort to improve the architecture of CoglMaterial internally this overhauls how we flush layer state to OpenGL by adding a formal backend abstraction for fragment processing and further formalizing the CoglTextureUnit abstraction. There are three backends: "glsl", "arbfp" and "fixed". The fixed backend uses the OpenGL fixed function APIs to setup the fragment processing, the arbfp backend uses code generation to handle fragment processing using an ARBfp program, and the GLSL backend is currently only there as a formality to handle user programs associated with a material. (i.e. the glsl backend doesn't yet support code generation) The GLSL backend has highest precedence, then arbfp and finally the fixed. If a backend can't support some particular CoglMaterial feature then it will fallback to the next backend. This adds three new COGL_DEBUG options: * "disable-texturing" as expected should disable all texturing * "disable-arbfp" always make the arbfp backend fallback * "disable-glsl" always make the glsl backend fallback * "show-source" show code generated by the arbfp/glsl backends
2010-04-26 09:01:43 +00:00
if (G_UNLIKELY (ctx->legacy_state_set))
{
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
source = cogl_material_copy (material);
_cogl_material_apply_legacy_state (source);
material: Adds backend abstraction for fragment processing As part of an effort to improve the architecture of CoglMaterial internally this overhauls how we flush layer state to OpenGL by adding a formal backend abstraction for fragment processing and further formalizing the CoglTextureUnit abstraction. There are three backends: "glsl", "arbfp" and "fixed". The fixed backend uses the OpenGL fixed function APIs to setup the fragment processing, the arbfp backend uses code generation to handle fragment processing using an ARBfp program, and the GLSL backend is currently only there as a formality to handle user programs associated with a material. (i.e. the glsl backend doesn't yet support code generation) The GLSL backend has highest precedence, then arbfp and finally the fixed. If a backend can't support some particular CoglMaterial feature then it will fallback to the next backend. This adds three new COGL_DEBUG options: * "disable-texturing" as expected should disable all texturing * "disable-arbfp" always make the arbfp backend fallback * "disable-glsl" always make the glsl backend fallback * "show-source" show code generated by the arbfp/glsl backends
2010-04-26 09:01:43 +00:00
}
material: remove override options from _cogl_material_equal As a follow on to using cogl_material_copy instead of flush options this patch now removes the ability to pass flush options to _cogl_material_equal which is the final reference to the CoglMaterialFlushOptions mechanism.
2010-05-18 22:38:33 +00:00
flush_options.flags = 0;
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
if (G_UNLIKELY (cogl_material_get_n_layers (material) != n_layers))
{
disable_layers = (1 << n_layers) - 1;
disable_layers = ~disable_layers;
flush_options.disable_layers = disable_layers;
flush_options.flags |= COGL_MATERIAL_FLUSH_DISABLE_MASK;
}
if (G_UNLIKELY (fallback_layers))
{
flush_options.fallback_layers = fallback_layers;
flush_options.flags |= COGL_MATERIAL_FLUSH_FALLBACK_MASK;
}
if (G_UNLIKELY (layer0_override_texture))
{
flush_options.flags |= COGL_MATERIAL_FLUSH_LAYER0_OVERRIDE;
flush_options.layer0_override_texture = layer0_override_texture;
}
cogl-material: Add support for setting the wrap mode for a layer Previously, Cogl's texture coordinate system was effectively always GL_REPEAT so that if an application specifies coordinates outside the range 0→1 it would get repeated copies of the texture. It would however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates are in the range 0→1 so that in the common case that the whole texture is being drawn with linear filtering it will not blend in edge pixels from the opposite sides. This patch adds the option for applications to change the wrap mode per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge' and 'automatic'. The automatic map mode is the default and it implements the previous behaviour. The wrap mode can be changed for the s and t coordinates independently. I've tried to make the internals support setting the r coordinate but as we don't support 3D textures yet I haven't exposed any public API for it. The texture backends still have a set_wrap_mode virtual but this value is intended to be transitory and it will be changed whenever the material is flushed (although the backends are expected to cache it so that it won't use too many GL calls). In my understanding this value was always meant to be transitory and all primitives were meant to set the value before drawing. However there were comments suggesting that this is not the expected behaviour. In particular the vertex buffer drawing code never set a wrap mode so it would end up with whatever the texture was previously used for. These issues are now fixed because the material will always set the wrap modes. There is code to manually implement clamp-to-edge for textures that can't be hardware repeated. However this doesn't fully work because it relies on being able to draw the stretched parts using quads with the same values for tx1 and tx2. The texture iteration code doesn't support this so it breaks. This is a separate bug and it isn't trivially solved. When flushing a material there are now extra options to set wrap mode overrides. The overrides are an array of values for each layer that specifies an override for the s, t or r coordinates. The primitives use this to implement the automatic wrap mode. cogl_polygon also uses it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced textures. Although this code has been added it looks like the sliced trick has been broken for a while and I haven't attempted to fix it here. I've added a constant to represent the maximum number of layers that a material supports so that I can size the overrides array. I've set it to 32 because as far as I can tell we have that limit imposed anyway because the other flush options use a guint32 to store a flag about each layer. The overrides array ends up adding 32 bytes to each flush options struct which may be a concern. http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-01 10:31:33 +00:00
if (wrap_mode_overrides)
{
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
flush_options.flags |= COGL_MATERIAL_FLUSH_WRAP_MODE_OVERRIDES;
flush_options.wrap_mode_overrides = *wrap_mode_overrides;
cogl-material: Add support for setting the wrap mode for a layer Previously, Cogl's texture coordinate system was effectively always GL_REPEAT so that if an application specifies coordinates outside the range 0→1 it would get repeated copies of the texture. It would however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates are in the range 0→1 so that in the common case that the whole texture is being drawn with linear filtering it will not blend in edge pixels from the opposite sides. This patch adds the option for applications to change the wrap mode per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge' and 'automatic'. The automatic map mode is the default and it implements the previous behaviour. The wrap mode can be changed for the s and t coordinates independently. I've tried to make the internals support setting the r coordinate but as we don't support 3D textures yet I haven't exposed any public API for it. The texture backends still have a set_wrap_mode virtual but this value is intended to be transitory and it will be changed whenever the material is flushed (although the backends are expected to cache it so that it won't use too many GL calls). In my understanding this value was always meant to be transitory and all primitives were meant to set the value before drawing. However there were comments suggesting that this is not the expected behaviour. In particular the vertex buffer drawing code never set a wrap mode so it would end up with whatever the texture was previously used for. These issues are now fixed because the material will always set the wrap modes. There is code to manually implement clamp-to-edge for textures that can't be hardware repeated. However this doesn't fully work because it relies on being able to draw the stretched parts using quads with the same values for tx1 and tx2. The texture iteration code doesn't support this so it breaks. This is a separate bug and it isn't trivially solved. When flushing a material there are now extra options to set wrap mode overrides. The overrides are an array of values for each layer that specifies an override for the s, t or r coordinates. The primitives use this to implement the automatic wrap mode. cogl_polygon also uses it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced textures. Although this code has been added it looks like the sliced trick has been broken for a while and I haven't attempted to fix it here. I've added a constant to represent the maximum number of layers that a material supports so that I can size the overrides array. I've set it to 32 because as far as I can tell we have that limit imposed anyway because the other flush options use a guint32 to store a flag about each layer. The overrides array ends up adding 32 bytes to each flush options struct which may be a concern. http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-01 10:31:33 +00:00
}
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
if (G_UNLIKELY (flush_options.flags))
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
{
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
/* If we haven't already created a derived material... */
if (source == material)
source = cogl_material_copy (material);
_cogl_material_apply_overrides (source, &flush_options);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
}
cogl: remove _cogl_material_flush_gl_state flush options Since cogl_material_copy should now be cheap to use we can simplify how we handle fallbacks and wrap mode overrides etc by simply copying the original material and making our override changes on the new material. This avoids the need for a sideband state structure that has been growing in size and makes flushing material state more complex. Note the plan is to eventually use weak materials for these override materials and attach these as private data to the original materials so we aren't making so many one-shot materials.
2010-05-18 21:42:49 +00:00
entry->material = _cogl_material_journal_ref (source);
if (G_UNLIKELY (source != material))
cogl_handle_unref (source);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_DISABLE_SOFTWARE_TRANSFORM))
cogl_get_modelview_matrix (&entry->model_view);
cogl: Use the colours of COGL_DEBUG=rectangles to debug batching Instead of assigning a new colour to each quad of a batch, the rectangle debugging code now assigns a new colour to each batch so that it can be used to visually see what is being batched. The colour is stored in a global variable that is reset during cogl_clear. This improves the chances that the same colour will be used for a batch in the next frames to avoid flickering.
2010-01-22 18:14:57 +00:00
if (G_UNLIKELY (cogl_debug_flags & COGL_DEBUG_DISABLE_BATCHING))
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
_cogl_journal_flush ();
profiling: Adds initial UProf accounting to Cogl This adds gives Cogl a dedicated UProf context which will be linked together with Clutter's context during clutter_init_real(). Initial timers cover _cogl_journal_flush and _cogl_journal_log_quad You can explicitly ask for a report of Cogl statistics by exporting COGL_PROFILE_OUTPUT_REPORT=1 but since the context is linked with Clutter's the statisitcs will also be shown in the automatic Clutter reports.
2009-07-03 15:22:35 +00:00
COGL_TIMER_STOP (_cogl_uprof_context, log_timer);
[cogl-primitives] Split the journal out from cogl-primitives.c The Journal can be considered a standalone component, so even though it's currently only used to log quads, it seems better to split it out into its own file.
2009-09-16 13:01:57 +00:00
}
Reference in New Issue Copy Permalink