The dialog doesn't change the `destroyOnClose` property from its default,
so it is already destroyed automatically on close. So if we also destroy
it explicitly, we end up (rightfully) with one of gjs' infamous "invalid
access" warnings.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/430
In order to replace GTK+'s GtkPolicyType. It's bit-compatible with it, too.
All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
ES6 finally adds standard class syntax to the language, so we can
replace our custom Lang.Class framework with the new syntax. Any
classes that inherit from GObject will need special treatment,
so limit the port to regular javascript classes for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/361
When an InputSourceIndicator is destroyed, the InputSourceManager it was
connected to could (and probably will) outlive it (since the manager is
a singleton). If the InputSourceManager emits any subsequent signals,
the callbacks from the finalised InputSourceIndicator could be invoked,
and will reference finalised objects.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Check via Polkit if the current user is actually allowed to enroll
devices before trying to do so. If not, show a notification that
explains that a system administrator needs to authorize the device.
Clicking on the notification will guide the user to the thunderbolt
control center panel. Before this patch, when the current user was
not allowed to enroll a device a polkit dialog would pop up which
is confusing because it did not contain any information why it was
shown. This patch implements the behavior as designed (see [1],
section "Multi-user environments").
[1] https://wiki.gnome.org/Design/Whiteboards/ThunderboltAccess
The pending-charge state means AC power is on but the battery is not
being charged. This can happen because its charge is above a certain
threshold, to avoid short charging cycles and prolong the battery's
life, or because the PSU is not powerful enough to charge the batteries.
Instead of lying to the user about something being estimated, we should
simply tell the truth and set the label to "Not Charging".
Closes: #701.
When gnome-shell receives the signal of 'set-content-type' from ibus,
gnome-shell calls KeyboardManager.holdKeyboard() and
KeyboardManager.releaseKeyboard() and the functions change the current
input focus in GNOME Xorg and it could result in closing a popup window
which has a password entry by focusing on the entry.
The solution is to stop to call the APIs on 'set-content-type' signal.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/391
This is the last remaining usage of Shell.GenericContainer
in the codebase, and posed small challenges compared to the
other removals.
A new St.Widget subclass called InputSourceIndicatorContainer
was added as a replacement to the Shell.GenericContainer. It
was needed because GNOME Shell needs to override the regular
size allocation functions, but InputSourceIndicator already
is a St.Widget with its own size allocation overrides.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
In the process of purging all usages of Shell.GenericContainer
of GNOME Shell, one specific problematic situation that might
occur is when classes have functions that would clash with any
ClutterActor or StWidget function name.
One of such example is SwitcherPopup.destroy(). Right now, this
class is a pure JavaScript class that wraps a real actor, but
soon this will change, and it'll become a St.Widget subclass.
Another problem with functions that mimic the toolkit ones is
the predictability of them; after calling destroy(), that widget
is expected to not be available anymore. In SwitcherPopup case,
it is still available for a short while. In this case, that's not
a big problem, but the show() and hide() functions in other clases
are more problematic because the actor's visibility does not
follow that.
This commit is a first step in cleaning that up, and changes the
SwitcherPopup.destroy() to fadeAndDestroy().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
In recent Fedora 29, connecting to wifi access points from the
user menu (top-right menu) does not work. Clicking the 'Connect'
button just animates it but does nothing else. The logs show an
error "JS ERROR: Error: Expected type utf8 for Argument
'specific_object' but got type 'undefined'".
Looking into this, it seems the problem is these uses of the
`path` property of an NMAccessPoint. NMAccessPoint inherits
from NMObject, and NMObject *does* have a path property:
https://developer.gnome.org/libnm/stable/NMObject.html#NMObject--path
so at first glance this seems fine. But I poked around a bit
using libnm via Python (which goes via introspection, just like
this JS code does), and found that indeed AccessPoint objects
don't seem to have a `path` property there either.
Looking at the libnm code, this actually makes sense, because
the property is marked "(skip)":
https://github.com/NetworkManager/NetworkManager/blob/master/libnm/nm-object.c#L1291
and the introspection docs suggest that means it should be left
out of introspected output:
https://wiki.gnome.org/Projects/GObjectIntrospection/Annotations#Symbol_visibility
I'm a bit concerned that this was only found recently - whereas
the change to use `.path` in gnome-shell dates from October 2017
(d71af5e5) and the property has been marked (skip) in NM since
at least 2016 - but this all seems to add up. The obvious fix is
to replace use of `.path` with `.get_path()`, which returns the
path and is *not* marked (skip) and so *is* available via
introspection. I tested that this works in Python and also did
a test build of gnome-shell with this change and installed it on
an affected system, it does seem to fix the bug.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
`NMConnectionDevice._sync()` is responsible for setting up the active
connection that we'll end up displaying. It expects the active
connection to already be in a map `_connectionItems`. If it isn't in
there, we get a null dereference and the indicator can get into a weird
state where it doesn't display devices / connections properly.
Let's change this expectation. If there is an active connection,
`_deviceAdded()` will eventually get to it and call `_sync()` to set up
the active connection state. We make `_sync()` tolerate there being no
active connection when it's called.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/140
Show an overamplified volume icon if volume is louder the max normalized one.
Use a similar logic as gnome-settings-daemon to delimit values, restricted
to output.
The purpose is to help users remember that visiting some websites or
using some apps can get LOUD.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Depending on hardware and recorded volume level, turning up the speakers
to the maximum volume may not be enough and the user will want to amplify
the volume above 100%. Currently this requires opening the sound Settings
panel which gets cumbersome when required repeatedly.
To support this case better, allow raising the sound volume above 100%
directly from the system menu if the feature is enabled via the
`allow-volume-above-100-percent` key in `org.gnome.desktop.sound`.
In a9ad91c831, a bug was introduced in the following code:
```c
this._settingsAction.connect('clicked',
this._onSettingsClicked().bind(this));
```
Notice that the callback is being executed! This commit
fixes that by removing the '()' from the callback.
The settings action button in the system menu simply launches
gnome-control-center, so we want its icon (and accessible name)
to always match the app. So instead of keeping the button in-sync
with Settings, just look up that information from the app itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/433
We can simply request the symbolic variant from CSS so that we don't
have to append '-symbolic' to all the names. This will always make
it easier to pick up that information from external sources (like
.desktop files).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/433
Make the indicator for active remote access use the warning color, to
indicate the severity of allowing remote access.
This only makes the indicator icon orange; the icon in the system menu
is still white.
Add an indicator for when there is something access the display server
remotely. This could be 1) remote desktop, 2) screen cast or 3) remote
control, but all effectively applications using
org.freedesktop.portal.ScreenCast or org.gnome.portal.RemoteDesktop as
well as gnome-remote-desktop using the corresponding org.gnome.Mutter
APIs directly.
As it is now, it'll simply show a single icon for when anything is
having an active session, and a single action "Turn off" that'll close
every active session.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/160
Remove any usage of MetaScreen, as it has been removed from libmutter
in the API version 3. The corresponding functionality has been moved
into three different places: MetaDisplay, MetaX11Display (for X11
specific functionality) and MetaWorkspaceManager.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
When the actor that has the key focus is destroyed, Clutter moves
the focus to the stage. In case the destroyed actor was inside a
ModalDialog, this breaks any keyboard interaction: keynav is broken
because the stage isn't in any focus chain, and access keys like
Escape because they are handled on the dialog's parent.
The only dialog that may destroy a child without recreating the dialog
buttons (and thus moving the key focus there) is the WirelessDialog,
fix it by keeping the key focus within the dialog when removing networks
from the list.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/76
Similar to what it's done when the main connection changes, we need
to make sure that the icon in the panel gets updated before calling
_syncConnectivity(), so that the icon gets always updated if needed,
regardless of whether there's an active connection or not.
This is needed because there's at least one case when an icon should
be shown when the computer is not connected to any network: when a
hotspot has been enabled, which can be useful even if there's not
an internet connection to share (e.g. to easily allow connecting
other devices to the computer.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/214
If we get an error during device enrollment, the message might be
prefixed to indicate that the error came from the remote peer. We
are presenting that message to the user so strip that prefix away
if it was there.
The devices emitted (device, error) while the connected handler
was expecting (error, device). The former is more consistent
with the rest of the code (so change it to device, error).
boltd 0.2 gained a property that indicates if it is authorizing
devices or not. If it indeed is not authorizing then we wont
try to enroll new devices because that would otherwise lead to
and error.
When not using arrow notation with anonymous functions, we use Lang.bind()
to bind `this` to named callbacks. However since ES5, this functionality
is already provided by Function.prototype.bind() - in fact, Lang.bind()
itself uses it when no extra arguments are specified. Just use the built-in
function directly where possible, and use arrow notation in the few places
where we pass additional arguments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/23
imports.misc.ibusManager.IBus is declared as const, so referencing it
from another module triggers a warning with recent mozjs. As of commit
083d11a032 IBus is mandatory, so just make it a regular import to avoid
the warning.
We will now basically act as "policy provider" for thunderbolt
peripherals by using org.freedesktop.bolt service: when new
devices are connect and session is a unlocked user session
we will automatically enroll (authorize and store in the database)
them.
If new devices are connected but the session is locked a message
will be shown informing the user that the device needs to be
reconnected to properly work.
The org.freedesktop.bolt service is provided by the "bolt" daemon.
Currently the language options displayed pretty much mirror those of the
top bar keyboard layout selection popup. It may make sense in the future
to only list languages, and automatically switch to the enabled IMs that
the OSK can benefit from (eg. by filling in suggestions).
In the current code it could happen that we've menuItems and indicatorLabels
for sources that aren't anymore around, because in case a source is removed
we don't cleanup the their container objects.
Also, we should nullify InputManager's _currentSource when sources change
or it might point to some invalid data again.
So it could happen that we try to access an invalid menuitem or label
if a source change happens mentioning a source that has been deleted.
https://bugzilla.gnome.org/show_bug.cgi?id=788931
This D-Bus property was never been added here, which caused inconsistencies
under some scenarios (e.g. coming back from suspend) if some devices were
previously paired, since _sync() would then make the bluetooth menu visible
unconditially, because of the proxied property evaluating to 'false'.
Adding this to the D-Bus interface makes sure that it's no longer undefined
and returns the right value, fixing the bug.
https://bugzilla.gnome.org/show_bug.cgi?id=789110
The idea behind always showing the icon on the login screen is that
the users' needs aren't known at that point. However we can achieve
the same behavior by including the 'always-show-universal-access-status'
key in GDM's presets, so drop the special-case.
https://bugzilla.gnome.org/show_bug.cgi?id=788943
In anticipation of showing the system actions in
the search results, it is fit to move action
specific code to its own module in order to
reuse it.
https://bugzilla.gnome.org/show_bug.cgi?id=691900
The current behavior wasn't designed, but was introduced in commit
84efaac52b to work around technical limitations when we were still
using external tools like gnome-screensaver or gnome-session-quit
to handle the actions. Those limitations are long gone, so it makes
sense to make the actions consistent with the corresponding keyboard
shortcuts: Leave the overview when launching an application, and leave
it alone otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=691900
As in commit b2b2f65 and furthermore it doesn't make much sense to
change the menu item according to the number of connections since all
connections here are of the same type.
https://bugzilla.gnome.org/show_bug.cgi?id=786520
The new control-center shell split wifi configuration from the network
panel, and moved all other devices into a flat list. So instead of
manually spawning the app with the 'show-device' subcommand, we can
now simply launch the appropriate settings panel.
https://bugzilla.gnome.org/show_bug.cgi?id=786520
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
While we've always considered it good style to initialize JS properties,
some code that relies on uninitialized properties having an implicit
value of 'undefined' has slipped in over time. The updated SpiderMonkey
version used by gjs now warns when accessing those properties, so we
should make sure that they are properly initialized to avoid log spam,
even though all warnings addressed here occur in conditionals that
produce the correct result with 'undefined'.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
It is possible to use the scroll wheel to adjust the volume without
opening the system menu, but there is no feedback other than the
icon itself in that case. To provide a less coarse indication for
the volume level, display the OSD window when adjusting the volume
while the slider isn't visible.
https://bugzilla.gnome.org/show_bug.cgi?id=781028
Since commit 2c070d38, we add a ClickAction to the visible AltSwitcher
button to track long-presses. As a result, we now have two components
that will grab and ungrab the pointer for the button, so to make sure
we don't end up with a stuck grab, we need to release the second's
component grab when the first activates.
Currently we only drop the StButton grab on long-press, we also need
to cancel any initiated long-press on click.
https://bugzilla.gnome.org/show_bug.cgi?id=781738
It doesn't make sense to tie the proxy code for flatpak's permission
store to the location indicator, just because that was the first
component to use it, so split it into a separate module.
https://bugzilla.gnome.org/show_bug.cgi?id=780252
Currently when the wifi selection dialog is open when the screen lock is
activated, the dialog remains visible above the shield. This is clearly
broken, so close the dialog automatically on session mode changes if the
mode doesn't allow settings (as changing the access point is arguably a
user setting).
https://bugzilla.gnome.org/show_bug.cgi?id=780054
The display configuration now exposes a setting to automatically
shift the display color at nighttime. As there are cases where
disabling the filtering temporarily is useful, it makes sense to
expose the feature in the system menu for quick access.
https://bugzilla.gnome.org/show_bug.cgi?id=741224
On systems that support both shutdown and suspend, the latter operation
is currently only accessible via pressing the Alt key. As using the
keyboard may be inconvenient or simply not possible (e.g. on touch),
allow switching between alternatives via long-press as well.
https://bugzilla.gnome.org/show_bug.cgi?id=721173
The permissions hash is initialized after consulting the permission
store, however the lookup is skipped for requests that cannot be
resolved to an application, resulting in an error when accessing
the uninitialized hash for saving. Just make sure that the property
is always initialized to avoid that error.
https://bugzilla.gnome.org/show_bug.cgi?id=778661
Items were inserted correctly but the synchronisation was lost if the
name of a connection was changed. Simply making sure the position is
correct after a connection is updated fixes the issue.
Reported-by: Oliver Haessler <ohaessle@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=778686
If the call to settings.get_connection_by_path in
ensureActiveConnectionProps returns null, we'll hit a JS error here.
Seems to happen always when activating a VPN connection. Avoid that.
Giovanni says:
"I believe this is papering over an existing bug, but it's possible for
settings.get_connection_by_path() to legitimately return null (if the
connection is owned by a different user and invisible to the current
one), so the fix is correct anyway."
https://bugzilla.gnome.org/show_bug.cgi?id=759793
The top bar's network menu only supports a subset of device types
supported by NetworkManager. While not having lesser used options
in the menu itself is perfectly reasonable, not showing any network
icon at all in the top bar when the system is fully connected is
weird.
https://bugzilla.gnome.org/show_bug.cgi?id=773890
Any network devices appear as top level items in the system status
menu, so on system with an unusually high number of devices, the
menu can end up exceeding the available screen height. While this
is a corner case, leaving important system actions unreachable is
bad. The system menu does not lend itself to scrolling, so handle
this case instead by summarizing sections ("n connections") where
the number of devices exceeds a threshold.
https://bugzilla.gnome.org/show_bug.cgi?id=773892
And adapt existing callers to the new API. This will allow us to
implement a way to launch applications on the discrete GPU for systems
where an "Optimus" system exists.
https://bugzilla.gnome.org/show_bug.cgi?id=773117
If Bluetooth is on but there aren't connected devices, the status in the
menu reads "Not in Use". This is potentially confusing: it's a negative
statement, even though Bluetooth is on. It also sits uneasily (and looks
even more confusing) next to the submenu item "Turn Off".
Changing the string to "On" is better.
https://bugzilla.gnome.org/show_bug.cgi?id=756432
NM upstream would like to reduce periodic scanning, and that means
that clients should request scans themselves while their WiFi list
is open. Similar to the Windows and macOS WiFi dialogs/lists.
https://bugzilla.gnome.org/show_bug.cgi?id=767918
We only connect to the corresponding property notifications after both
Client and RemoteSettings are ready, so we may miss the initial signal
emission. Make sure to pick up the connections in this case to fix the
network indicator not showing up.
https://bugzilla.gnome.org/show_bug.cgi?id=772249
We currently show the orientation lock button when an accelerometer
is present, however gnome-settings-daemon's xrandr plugin only applies
rotation when a builtin monitor is present. Update the button's
visibility to match gnome-settings-daemon.
https://bugzilla.gnome.org/show_bug.cgi?id=765267
Let's make it really simple and ask user interactively, once. This
simplifies things for:
* Privacy panel of gnome-control-center as it doesn't have to filter
applications.
* Apps: If they are denied access, they can simply point users to
privacy panel of gnome-control-center since they can be sure location
access for the app can be enabled in there.
Also it's less annoying to user. Before this patch, if they denied
access to application, they had to keep doing that at least each time
they launched the application.
https://bugzilla.gnome.org/show_bug.cgi?id=762559
Alex told me that since it's not geoclue but rather GNOME-components
storing/accessing app permissions, it's better if we put it under
'gnome' rather than generic 'desktop' table.
While we could have implemented this already a while ago, this would
have been a completely false security mechanism since we had no way of
reliably identifying applications. Since now with xdg-app, we can at least
reliably identify bundled applications, let's give users a choice of
which applications in particular they are OK with giving location data
to.
While we still can't reliably identify system (non-xdg-app) applications,
it seems extremely unlikely we'll ever be able to do that (at least not
in the near future) so we'll have to trust them to not lie about their
IDs.
Next release of geoclue will take the ID of bundled application directly
from corresponding xdg-app metadata so bundled applications can't simply
lie about their IDs.
https://bugzilla.gnome.org/show_bug.cgi?id=762119
This class will be responsible for authorizing applications that try to
access location information. Since this is mainly targetted for xdg-app
applications, we make use of xdg-app's D-Bus API to store
per-application authorization.
https://bugzilla.gnome.org/show_bug.cgi?id=762119
Add a dialog that is used in a following patch, to ask user if they want
a requesting application to gain access to their location.
Co-author: Florian Müllner <fmuellner@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=762119
Any time estimates we can come up with are notoriously unreliable;
even on devices that report correct (dis)charging rates, any change
in workload, screen brightness etc. can throw our estimate off by
a huge amount. This is further compounded by bad firmware and battery
firmware which reports inaccurate data as neither Windows nor Android do
not use that data.
So instead, limit ourselves to only showing the current percentage
and leave its interpretation to the user.
As an added bonus, we end up with shorter strings that are less likely
to cause problems with ellipsization when translated.
https://bugzilla.gnome.org/show_bug.cgi?id=708472
If we detected that Bluetooth devices were setup, show the Bluetooth
menu so that users can easily turn Bluetooth back on.
This is a bit of a hack, as we cannot detect whether there is a
Bluetooth adapter at all when it's disabled, so we cannot tell whether
there were any Bluetooth devices setup, at some point. This state is
saved in the gnome-shell GSettings in the had-bluetooth-devices-setup
key.
Checking whether we saw Bluetooth devices at one point is a good
enough guess of whether there will be some in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=723848
* switch to a one-column layout (and adjust strings/widths
accordingly
* remove separator before system menu
* add link to account settings to user submenu for consistency
https://bugzilla.gnome.org/show_bug.cgi?id=751377
Follow the design we have in gtk+ for buttons dialogs,
which are at the bottom and they expand full width, having
the same amount of space for each one.
Also, since this removes any space for non-button widgets
in the button area, move the spinner present in the auth prompt
dialog next to the password entry.
https://bugzilla.gnome.org/show_bug.cgi?id=746108
Instead of using gnome-settings-daemon's D-Bus interface's presence.
iio-sensor-proxy now offers a D-Bus interface, which will exported
"HasAccelerometer = true" when an accelerometer is present.
https://bugzilla.gnome.org/show_bug.cgi?id=749671
Instead of saving only the current input source when entering password
mode, let's save the whole MRU list so that we can restore it when
returning to normal mode.
This is closer to user expectations since password mode is a transient
and short lived state.
https://bugzilla.gnome.org/show_bug.cgi?id=746605
g-s-d has been taking care of this for us but in a very hackish way
that causes dconf writes on every startup and also doesn't handle
dynamic updates to locale1's properties which has become a problem now
that GDM keeps its greeter session running in parallel with users'.
To take care of this properly, this commit introduces a settings
abstraction with both system and session implementations. The session
implementation just wraps access to the existing gsettings while the
system one gets its values from org.freedesktop.locale1's properties.
https://bugzilla.gnome.org/show_bug.cgi?id=746288
The mode is never set after the removal of the bottom tray, so it
no longer makes sense to pass it to allowKeybinding(). We can also
safely remove it from the ActionModes flags altogether without
requiring a synchronized update with gnome-settings-daemon, as
the latter never used any flag value above LOGIN_SCREEN.
This used to be the style-class for status icons (i.e. icon-only
top bar items). It got unused a while ago when the class used
by status icons stopped using it - except for the keyboard indicator,
which set the class manually to appear as status icon despite not
being a real icon.
Now that the button highlight is provided by the .panel-button class
on a parent, the obsolete class results in a double border on the
keyboard indicator when active - just drop it from there as well
to fix.
Input method preedit text needs to be disabled on password entries
for security and usability reasons.
IBus 1.5.7 provides the signal set-content-type so that panel UIs can
handle these special purpose input entries:
https://github.com/ibus/ibus/commit/6ca5ddb302c9
Unfortunately IBus versions older than 1.5.10 have a bug which causes
spurious set-content-type emissions when switching input focus that
temporarily lose purpose and hints defeating its intended semantics
and confusing users. We thus don't use it in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=730628
Due to a typo we were always removing the first (index 0) connection
from the global list of connections instead of the correct one.
This resulted in some connections remaining in the shell's connection
list long after they were removed. In particular, this resulted in
multiple copies of a bluetooth connection appearing after suspend/resume
(when the device was readded and the cached connection list was
rescanned).
https://bugzilla.gnome.org/show_bug.cgi?id=740227
Normally users switch xkb input sources and ibus input sources.
But currently the first input source only is running. It's also good
to preload all ibus engines in the logging session so that users switch
input sources quickly without the launching time of input sources.
The following is the ibus change:
https://github.com/ibus/ibus/commit/cff35929a9https://bugzilla.gnome.org/show_bug.cgi?id=695428
Most of the code handles the sources setting being empty and
InputSourceManager.currentSource being null because previously the
"model" (i.e. the sources list) was kept in gnome-settings-daemon.
But this is fragile and since we're now the canonical place where the
list lives we can force it to never be empty even if the gsetting is
empty or contains only invalid entries. Adding the default keyboard
layout in that case is the safest thing to do.
https://bugzilla.gnome.org/show_bug.cgi?id=738303
All other submenus link to the corresponding settings, so we should
do the same for location - the privacy panel in this case, which now
sports a "Location Services" switch ...
https://bugzilla.gnome.org/show_bug.cgi?id=736542
Instead of calling out to gnome-settings-daemon we'll just implement
the switching logic ourselves and use mutter APIs that allow this
functionality to work both in X sessions and when we're a Wayland
compositor.
Switching IBus engines is done transparently as well just like g-s-d
used to do.
https://bugzilla.gnome.org/show_bug.cgi?id=736435
We don't really need this step as a separate method since all
implementations are supposed to be created and shown immediately. This
also ensures that we have items to show in all subclasses.
https://bugzilla.gnome.org/show_bug.cgi?id=735976
The enums values of geoclue have gaps in them (so more levels could be
added in future) but enum values of settings don't have such gaps so we
gotta translate between them.
Since desrt says that enums as integers in gsettings are bad, we now
treat accuracy level settings as string.
This fixes the recent regression of geoclue only allowing geiop level
accuracy to apps.
https://bugzilla.gnome.org/show_bug.cgi?id=736479
Users can now toggle geolocation off/on from privacy panel of
gnome-control-center so we don't need to clutter the menu with a
settings that most users won't touch most of the time.
https://bugzilla.gnome.org/show_bug.cgi?id=731122
All derived classes are already checking explicitly for action names
(FOO and FOO_BACKWARDS). mutter used to have a META_KEY_BINDING_REVERSES
flag for keybindings which required special handling of "shift"+FOO as
FOO_BACKWARDS, but this has been removed now, so this special handling
is no longer necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=732296
When this flag is set on a MetaKeyBinding, mutter will know that
the keybinding has an associated reverse keybinding triggered with
the shift modifier. However, an undesirable side-effect is that
gnome-control-center keyboard panel does not know that this 'shift'
is reserved for these reverse keybindings and cannot detect
conflicting bindings in this case.
This 'reverse' logic can now be handled at a higher level (in gcc keyboard
panel) so this commit removes it from gnome-shell so that they do not
conflict.
https://bugzilla.gnome.org/show_bug.cgi?id=732296
Now that mutter gives a way to check if a MetaKeyBinding was marked as
'reversed' or not, gnome-shell does not have to hardcode that a
MetaKeyBinding using a shift modifier is reversed, it can directly check
if the appropriate flag is set.
https://bugzilla.gnome.org/show_bug.cgi?id=732296
Since these settings are now going to be accessed by
gnome-control-center as well, its more appropriate for them to live in
gsettings-desktop-schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=734483
Having the on/off setting be backed by a boolean in dconf makes sense
anyway but this is mainly to be able to remember the max accuracy set
before user disabled geolocation so that when they enable it next time,
we have the max accuracy level on same value as before.
There hasn't been a real need for this but now we are about to add
geolocation settings in control center and it'll be easiser for
control-center to simply toggle a boolean property rather than to have
to know about and deal with accuracy levels.
Later we might also want to add accuracy level settings to privacy panel
so keeping the accuracy level setting around still. However we no longer
support 'off' accuracy level as the new boolean property covers that.
This also implies that we no longer track available accuracy level,
which made the code a bit hard to follow/maintain.
https://bugzilla.gnome.org/show_bug.cgi?id=734483
Listen to changes in connectivity, and ask our helper to authenticate
when needed.
We don't have a URL to connect to yet (we will have when
the new NM API lands), so we use the default of trying
www.gnome.org (which is also more reliable because we can
recognize when the login is done)
https://bugzilla.gnome.org/show_bug.cgi?id=704416
Icons inside the menu are updated only for device state change,
but for the main device they also depend on connectivity (which
is a global property).
Add a public method to force an update of the icon, and call it
when connectivity changes.
https://bugzilla.gnome.org/show_bug.cgi?id=726401
We translate 'On' to available accuracy level but if available accuracy
level later changes, we don't update available accuracy level accordingly
and hence limit the accuracy of apps.
E.g if available accuracy level is 'city' and geolocation is enabled,
the max accuracy level would be 'city' and apps can't get higher than
that. Now if user plugs in GPS, the available accuracy level will change
to 'exact' but without this patch max accuracy level will remain to be
'city' and apps will not be able to use the GPS.
https://bugzilla.gnome.org/show_bug.cgi?id=731882
The code currently tries to use Meta.KeyBindingFlags.REVERSED. Since
this constant is |'ed with Meta.KeyBindingFlags.REVERSES, gjs silently
ignores the unknown flag.
https://bugzilla.gnome.org/show_bug.cgi?id=731619
When switching between alternatives in AltSwitcher, the currently
visible child is replaced with the alternative. If the original
child has the key focus when it is removed from the stage, the
focus is lost. Detect this case and manually move the focus to
the new child.
https://bugzilla.gnome.org/show_bug.cgi?id=727259
If geoclue reports that we can't aquire location, we hide the menu. This
will typically happen when user is offline (and doesn't have a 3G
modem). This is likely not what we want since this like a temporary
situation and user would want the ability to toggle geolocation still
even if its currently not possible any applications to query the
location.
https://bugzilla.gnome.org/show_bug.cgi?id=727398
* 'Turn On' -> 'Enable'
* 'Turn Off' -> 'Disable'
* 'Off' -> 'Disabled'
* 'On' -> 'In Use' or 'Enabled' depending on whether or not service is
in use.
https://bugzilla.gnome.org/show_bug.cgi?id=726498
In addition to BluetoothAirplaneMode, we need to check also
BluetoothHasAirplaneMode, which is indicative of bluetooth rfkill
devices (and by extension bluetooth adapters).
This prevents showing the menu if there is no adapter present.
https://bugzilla.gnome.org/show_bug.cgi?id=725057
Most system menu entries are disabled on the lock/login screen;
there is no good reason why users should be allowed to turn bluetooth
on/off (but not e.g. Wifi), so disable the entry as well.
https://bugzilla.gnome.org/show_bug.cgi?id=726319
NMApplet will call removeConnection() unconditionally on all sections,
including those that had nothing to do with the connection in the first
place.
Fixes:
Gjs-WARNING **: JS ERROR: TypeError: this._connectionItems.get(...) is undefined
NMConnectionSection<.removeConnection@resource:///org/gnome/shell/ui/status/network.js:323
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMApplet<._connectionRemoved@resource:///org/gnome/shell/ui/status/network.js:1885
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=725958
The profile name is most often not useful (because it's an
autogenerated string like "Wired Connection 1"), and even when it
is, it's already available in the submenu.
https://bugzilla.gnome.org/show_bug.cgi?id=725586
To be able to correctly setup dbus policy, I had to change the expected
agent D-Bus API a bit: Now object path is fixed and not different for
each user.
https://bugzilla.gnome.org/show_bug.cgi?id=725082
Until now the arrows were the associated arrow
character of the font. This cause some problems like
different arrows for different fonts, and size can be
altered because of the font size.
To solve that, use an image for the arrows.
https://bugzilla.gnome.org/show_bug.cgi?id=720206
Multiple connections for the same device are mutually exclusive, so
a switch is not the appropriate UI metaphor. Use a radio item instead,
and provide a separate "Turn off" item to disconnect.
Behavior when there is only one connection is not changed, there
is a single Connect/Turn off item.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
We don't watch for timestamp changes, and sorting by name keeps
the order consistent and predictable. In practice, there should
be at most 3 or 4 elements, so the user will always read all them
at once and sorting is irrelevant.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
If the connection name is changed, the UUID doesn't necessarily,
so checkConnection would take the early return path. Make sure
we update the existing menu item too.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
The active_connection might be null, but the NMApplet code might
still belive the device wrapper is the primary connection (because
dbus signals are emitted one after the other).
(Also, remove an old and wrong comment about bluetooth in wwan code)
Fixes:
(gnome-shell:22511): Gjs-WARNING **: JS ERROR: Exception in callback for signal: icon-changed: TypeError: this._device.active_connection is null
NMDeviceWired<.getIndicatorIcon@resource:///org/gnome/shell/ui/status/network.js:475
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMApplet<._updateIcon@resource:///org/gnome/shell/ui/status/network.js:1790
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
_emit@resource:///org/gnome/gjs/modules/signals.js:124
NMConnectionSection<._addConnection/<@resource:///org/gnome/shell/ui/status/network.js:265
_emit@resource:///org/gnome/gjs/modules/signals.js:124
NMConnectionItem<._sync@resource:///org/gnome/shell/ui/status/network.js:137
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMConnectionItem<.setActiveConnection@resource:///org/gnome/shell/ui/status/network.js:169
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMConnectionDevice<._activeConnectionChanged@resource:///org/gnome/shell/ui/status/network.js:327
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=723570
This reverts commit 5d05b66902.
Had a long discussion with Bastien Nocera and Allan Day on IRC about
this and in the end we decided to go with the simple on/off controls for
now.
Conflicts:
js/ui/status/location.js
https://bugzilla.gnome.org/show_bug.cgi?id=723684
When exact accuracy (i-e GPS) is available, allow user to disable that.
When users don't want application to get their precise location, they
can now opt for network-based geolocation only, which can be
street-level at best.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Instead of relying on geoclue to store this user configuration, lets
keep it in gsettings. Geoclue is a system service and therefore is not
the appropriate entity to keep this info.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Now that we are indicating 'geolocation in use' to user, we better also
provide at least a way to disable geolocation. Once this is in place, we
can provide slightly better controls rather than simply on/off switch.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
This reverts commit a36bfced47.
get_available_connections() returns the connections that are
available right now, ie, with the currently visible APs, but
that might change while the dialog is open, so we can't use it.
https://bugzilla.gnome.org/show_bug.cgi?id=709128
To distinguish the bluetooth network menu from the bluetooth
menu proper, use the device name as the label.
Also, replace Connect with "Use as Internet connection"
https://bugzilla.gnome.org/show_bug.cgi?id=709353
The design says "when a network cable is connected", not
"When a network cable is connected and the link is up and we
have an IP etc. etc." (which is what ACTIVATED would imply).
https://bugzilla.gnome.org/show_bug.cgi?id=723570
Rather than just showing "No networks", inform the user if airplane
mode is on or if wifi is off, and allow the user to change that
from the dialog (if possible).
https://bugzilla.gnome.org/show_bug.cgi?id=709128
Ideally, we should keep scanning while the dialog is open, and
stop (or reduce the frequency) when it's closed. Forcing a new
scan when the dialog is opened empty is a close approximation
and increases the probability that the user will find the AP
he needs.
https://bugzilla.gnome.org/show_bug.cgi?id=709128
If airplane mode is enabled with an HW switch, we can't turn it
off from the menu, so make the menu item insensitive and
replace it with a helpful tip.
https://bugzilla.gnome.org/show_bug.cgi?id=709685
It's a lot simpler and doesn't require us routing the NMRemoteSettings
all the way through. It's still a bit complicated to do this for the
usual connections, so let's drop it for now.
The org.gnome.login-screen schema contains a key to disable the
power/restart buttons; our support for this fell victim to the
new combined status menu, add it back.
https://bugzilla.gnome.org/show_bug.cgi?id=711244
Some consumers may want to construct their buttons specially, so allow them
to do that by adding a new API that takes a button instead of a label.
https://bugzilla.gnome.org/show_bug.cgi?id=710137
Their use blocks activation of the default button by keyboard, which
is important for accessibility. Use a Clutter.ClickAction instead,
which doesn't have this problem as it only considers mouse events.
https://bugzilla.gnome.org/show_bug.cgi?id=710144
Since the agregate menu does 120% of font-size, make this
for all dropdown arrows in gnome-shell and rename the css
class to make clear that it is used in overall gnome-shell
https://bugzilla.gnome.org/show_bug.cgi?id=709564
Show "Hardware Disabled" when disabled by HW switch, and
generically "Disabled" when airplane mode is active, as
indicated by v4 mockups.
Note that bluetooth is not affected by NM handling of airplane
mode (and generally the firmware makes the USB bluetooth
adapter disappear when rfkilled), so this is in NMDeviceModem
instead of NMConnectionDevice.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
The property is on the NMClient, not NMDevice. Also, make sure
we disconnect the signal when the item is destroyed.
Also, connect to wireless-hardware-enabled, which we'll use soon.
https://bugzilla.gnome.org/show_bug.cgi?id=709635
If the active connection for the device is not the primary or
activating globally, it won't have the _connection and _primaryDevice
expando properties, so grab them from the settings object.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
The patch fixes the following warning, and along with it, the proper
destruction of the NMConnectionSection is performed so that items get
correctly removed from the menu.
(gnome-shell:24528): Gjs-WARNING **: JS ERROR: TypeError:
this.statusItem is undefined
NMConnectionSection<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:173
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMConnectionDevice<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:292
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMDeviceModem<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:448
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._removeDeviceWrapper@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1421
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._deviceRemoved@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1416
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
https://bugzilla.gnome.org/show_bug.cgi?id=709248
Activating the GDM login screen switches VT and causes X to freeze
event processing (because it lost the drm master), so must make
sure to have painted the lock screen at least once before proceeding,
or the user can go back and see the unlocked desktop.
https://bugzilla.gnome.org/show_bug.cgi?id=708051
For extremely silly reasons with how the class framework works, the wrapper
method requires "this" to be bound in order for it to work, or else we'll
emit errors in strict mode.
https://bugzilla.gnome.org/show_bug.cgi?id=707892
We watch changes in the VPN state, not the active connection state,
so if we use the active connection state, we might miss an update
(because the VPN property is notified before the other one)
https://bugzilla.gnome.org/show_bug.cgi?id=706262
Descriptions are only added after all devices are read (thanks
to the disambiguation in libnm-gtk), but we use them immediately
when we call _sync() in various points (such as checkConnection())
https://bugzilla.gnome.org/show_bug.cgi?id=706262
When we implemented the new designs, we lost the ability to suspend
from the system menu. Re-enable this ability by re-adding the hidden
"Alt" shortcut item.
https://bugzilla.gnome.org/show_bug.cgi?id=706612
If we don't have a connection at startup or we transition from
having a connection to not having a connection, we need to make
sure we hide the correct indicators.
This will replace the indicator painted on the stage right now.
This unfortunately does not work for the recorder triggered by the
keybinding -- we'll simply replace the in-shell code with a keybinding
powered by gnome-settings-daemon.
There's only two uses of the parameter left, which can easily be added as a
separate line below. Since it's really a private interface meant for the
indicators, make it private as well so external users are less likely to
use it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
To align the arrows, we need to allocate panel buttons the full
height of the tray. Fix up all of the panel buttons to support this,
and align the arrows in the middle.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
Swap out the implementation of SystemIndicator with a dummy,
and build the aggregate menu. At the same time, remove the
poweroff and login screen menus, as those were fake aggregate
menus beforehand.
We lose some flexibility as we lose session-mode-based menu
layout, but as each component of the aggregate menu is supposed
to be "smart" in response to updating itself when session
state changes, I believe it's better than a declarative model.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
We can't silently replace the old behavior of separate status
icons into a new system. Replace SystemStatusButton with a new
SystemIndicator class which will allow for the flexibility we
need. For now, make it a subclass of Button so that it mostly
feels the same, but we'll soon be swapping it out with a dummy
implementation that the aggregate menu will use.
I think the code cleanup here is worth it.
https://bugzilla.gnome.org/show_bug.cgi?id=705845
Remove the Wi-Fi chooser from the menu and put it in a dialog instead.
This frees up the submenu to simply have three items: an rfkill toggle,
a button to show the dialog, and a button to show network settings.
Ideally, we'd autodetect the "needs network" case by user initiation
and automatically show the dialog if needed, but lower-level plumbing
is neccessary, so the menu item to show the dialog is an acceptable
compromise instead.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Since the network section of the aggregate menu will be shown in the lock
screen, we need to ensure that users can't tweak with network settings or
anything like that.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Replace NMNetworkMenuItem with NMConnectionItem, based on
NMVPNConnectionItem, and replace NMDevice with NMConnectionSection
and NMConnectionDevice.
Since this rips apart NMDevice, and since wi-fi should not be
connection-based, we'll temporarily remove NMDeviceWireless. We'll
add it back in a later commit, along with the new Wi-Fi dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Instead, just add them after they're constructed. This allows us to
not have to pass the connections to each device, and prevents issues
with having to enumerate the connections in the middle of construction.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
Note that this does have an interesting side effect of not showing
network connectivity status on wired. This is intentional, and error
states will still be shown in the top bar when they happen.
This also means that if you're connected to both wired and wireless,
even though wired is the default route, we'll first notice the wireless
active connection, and we'll show that in the top bar. New NM API that
will help figuring out the active connection of the default device is
being implemented to stop this from happening.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
The code is complicated by requiring overflow, and in order to incrementally
improve the code to match the designs, remove overflow.
In the new design, we'll have a fixed number of menu items, and Wi-Fi
will be done by a separate design, so we can't be too concerned with
the menu not fitting on the screen.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
According to Dan Williams, if firmware is installed the device
will disappear and reappear, and this is unlikely to change any
time soon. Just make our lives easier by removing the tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
I intended to make a few code cleanups, but I apparently forgot
to hook up _updateAccessPoint. Merge it with _activeApChanged,
which is where the notify::active-access-point signal is actually
hooked up to.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
This is a regression from splitting the slider out that never got fixed.
Restore the previous (useful) behavior by adding a public API to the
slider that lets us pass an event through.
https://bugzilla.gnome.org/show_bug.cgi?id=704368
_updateIcon should not attempt to sync any active connections, as the
icon-changed signal can be emitted in response to something done during
_syncActiveConnection. In the case of VPN, removeActiveConnection would
cause an icon-changed signal to be emitted immediately, but the state
would not be updated, causing us to call removeActiveConnection over and
over.
Explicitly sync all active connections when we know it needs to be done,
and simply make _updateIcon synchronize with the current device's icon.
https://bugzilla.gnome.org/show_bug.cgi?id=703565
The status item will go away soon, so make sure the one-time
fire is given its own function. At the same time, only connect
to the signal when the situation actually matters.
https://bugzilla.gnome.org/show_bug.cgi?id=701954
No class in here has this.carrier as a property. Presumably, this was
meant to be this.device.carrier, but since this code is going to be
rewritten soon anyway, might as well just junk the never-working
code for now.
https://bugzilla.gnome.org/show_bug.cgi?id=701954
In BlueZ 4, Authorize() was used to authorize both service
and JustWorks authorization requests. In BlueZ 5 these two
have been split into AuthorizeService() for services and
RequestAuthorization for JustWorks devices. Adapt the
Bluetooth code accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=700891
This can be more easily achieved by listening for changes to the
device's active-connection property. VPN will still need support to
track active connections, as it does not have an associated
device. But as VPN can track multiple active connections, the names
"set" and "clear" don't quite fit. Rename them to the more-standard
"add" and "remove".
https://bugzilla.gnome.org/show_bug.cgi?id=701954
As multiple-connections for a Wi-Fi AP won't fit in the new design,
remove submenus right now. Simply make a simple item that connects
to the first known connection for the AP, which should be the common
case.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
This is a singleton object inside libibus which means that if we
destroy it (e.g. because ibus-daemon got restarted) then, other
library users, like the ibus gtk+ IM module that we also use
in-process, will break.
https://bugzilla.gnome.org/show_bug.cgi?id=699189
Currently we simply set the gsettings key when activating an input
source. This obviously introduces a time window, between the event that
activates the switch and when the switch is complete, under which key
events are being delivered to applications and interpreted according
to the previous input source.
The patches in bug 696996 introduce a DBus API in g-s-d that allows us
to know when an input source if effectively active. Using that and
freezing keyboard events in the X server until we hear back from g-s-d
we can ensure that events won't be misinterpreted after an input
source switch.
https://bugzilla.gnome.org/show_bug.cgi?id=697007
Passkey is the proper name to be used when we are pairing with a Bluetooth
2.1+ device. PIN are only used for older devices which is not the case
here, the message is only shown when dealing with 2.1+ devices.
https://bugzilla.gnome.org/show_bug.cgi?id=697661
