We were actually showing a menu on button 3 before, but only
through a chain of coincidences. This patch explicitly supports
it and makes sure we show it immediately rather than after
a timeout. Pass the activating button in so that we only pop
down on that button.
https://bugzilla.gnome.org/show_bug.cgi?id=596371
Before we hardcoded popdowns to only button 1 before. But we need
to actually pop down on the release of the activating button.
(Once the button is released, if the we don't pop-down the menu,
then subsequently we let the user use any button.)
https://bugzilla.gnome.org/show_bug.cgi?id=596371
Also have inactive applications pop up a menu.
Add/Remove from favorites is now in the menu.
Concatenate the favorites/not-favorites instead of having a gap only
if you happened to have a not-divisible-by-4 number of favorites.
https://bugzilla.gnome.org/show_bug.cgi?id=596371
This makes a visible distinction between the apps that only have minimized
windows on the current workspace and the ones that have no window on the
workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=590563
This allows defining some custom policy for size allocation.
Currently, the minimum width is always used, but it can be tweaked
afterwards when a sizing policy has been defined.
https://bugzilla.gnome.org/show_bug.cgi?id=590563
We shouldn't show all sections each time the search is updated because that
breaks viewing search results for a single section and flickers headers for
sections with no results.
Fix displaying documents in the document browse and refreshing the selection
when the results have changed.
Make sure we are passing the appropriate flag to _redisplay() in GenericDisplay.
Make sure we set this._appsStale to true if there was a change in the
applications set.
Don't call _refreshCache() from the AppDisplay constructor.
Don't short-circuit the call to _refreshCache() from _redisplay() on initial load.
Rename _redisplayFull() to recreateDisplayItems() and remove adding an
actor to the actual result list in _addDisplayItem() because we redo adding the
actors to the list in _redisplayReordering() anyway to ensure that we add
them in the right order.
Based on a patch from Colin Walters.
Clutter requires Pango.gir. Until Pango is universally available
in a version that builds its own GIR, Pango.gir is built as part
of gir-repository.
(Found by Adel Gadllah)
Following the idea expressed in bug 590563 by mccann ("Minimized or
hidden applications should appear at the end of the list"), we should
also put applications that have no visible window in the active
workspace at the end of the alt-tab window list, after apps which have
minimized windows in the active workspace.
Miscellaneous fixes from review:
- Distribute calendar.js and the interactive test
- Make the pointless protection against leap seconds actually work
by starting in the middle of the day so that forward/back always
move a day.
- Use a variable instead of an inline '8' to know where to start
when removing old day actors.
- Remove a stray comment from the test
https://bugzilla.gnome.org/show_bug.cgi?id=596432
Make the calendar reactive and handle scroll events to change the month.
(GtkCalendar and hence the old gnome-panel calendar supported this and
it is apparently a handy way to flip through months.)
The padding is moved from the CalenderPopup to the Calendar so that the
scroll region extends all the way to the edge of the popup.
https://bugzilla.gnome.org/show_bug.cgi?id=596432
round() is a C99 addition, so causes portability problems:
different C library versions require different #defines to
enable it. So simply avoid using it.
Previously, we initialized actor stacking order from the return
value of global.get_windows() once, which is defined to be in
stack order. However it was not updated later. Furthermore,
the way stackAbove was called from onAnimationComplete in
WindowClone was highly dubious, since there are lots of animations
which apply to the clones, and we want the stacking to be right
all of the time, not when some animation completes.
Fix this by connecting to 'restacked' on the screen and syncing
the clones.
I also snuck in another bugfix here; we weren't disconnecting
from the 'showing' signal handler, which had various bad
consequences.
https://bugzilla.gnome.org/show_bug.cgi?id=596263
js/ui/calendar.js: Generic calendar widget
tests/interactive/calendar.js: Basic test of the calendar
js/ui/panel.js: Add a pop-down from the clock that shows a
calendar widget. The pop-down is not menu-like to allow the user to
interact with an application while looking at the calendar.
gnome-shell.css: Add theming for calendar, calendar popup, and for
buttons on the panel
https://bugzilla.gnome.org/show_bug.cgi?id=596432
Property enumeration names should correspond exactly to the property names;
in particular the ACTIVE vs :checked disparity was confusing reading the
code.
http://bugzilla.moblin.org/show_bug.cgi?id=6504
StButton is used for many things - scrollbar steppers, etc. Theming
all buttons to look like push-buttons breaks that. So in testcommon.css
just theme a .push-button class to look vaguely button-like.
https://bugzilla.gnome.org/show_bug.cgi?id=596432
Convert the StTable code from StStylable to StThemeNode. The
:row-spacing and :col-spacing GObject properties are converted
into spacing-rows and spacing-columns style properties.
A new interactive test is added for StTable.
https://bugzilla.gnome.org/show_bug.cgi?id=596811
Remove the StTable specific methods to add actors:
st_table_add_actor()
st_table_add_actor_with_properties()
Since they shadow the generic ClutterContainer add_actor() method,
and patch in our add() convenience function as we do for
StBoxLayout.
https://bugzilla.gnome.org/show_bug.cgi?id=596811
Remove the StBoxLayout:spacing GObject property, and instead make
BoxLayout look up the spacing from the CSS style. This makes it
consistent with padding and will allow the use of units. (The
removal of the GObject property entirely instead of making it an
override is consistent with how we handle color, font, padding, etc.)
https://bugzilla.gnome.org/show_bug.cgi?id=596803
Instead of using "Monospace", pick the users configured monospace font
name up from GConf. (This is a nice touch, but is more done here to
demonstrate that we can do it rather than for any great utility.)
https://bugzilla.gnome.org/show_bug.cgi?id=591245
* Style aspects like colors and fonts are moved into gnome-shell.css.
* Scrolling is adding using StScrollView.
Based on a patch from Colin Walters
https://bugzilla.gnome.org/show_bug.cgi?id=591245
Add clutter-text properties to allow getting access to the underlying
ClutterText actor. This corresponds to the get_clutter_text() methods.
The PROP_LABEL and PROP_ENTRY enum values are renamed to PROP_TEXT to
match the names of the properties that they correspond to, and the
properties of StEntry are reordered into alphabetical order.
Based on a patch from Colin Walters
https://bugzilla.gnome.org/show_bug.cgi?id=591245http://bugzilla.moblin.org/show_bug.cgi?id=6313
StBoxLayout: Make consistent that the area scrolled and clipped
to is the content area (excluding borders and padding.) Translate
back appropriately when chaining up so that the parent background
is drawn at the right place and picking on the box (if it's reactive)
picks at the right place on the screen.
clip-to-allocation is removed from StScrollView since it's just
not right - if the child has any non-moving elements, like headers or
borders, it will need to set a narrower clip. And even if the entire
child scrolls, we want to clip to an arrow that excludes the scrollbars.
https://bugzilla.gnome.org/show_bug.cgi?id=595997
When a StBoxLayout is allocated a size less than its natural size,
think "shrink" needs to be divided among the children that have
a smaller minimum size than natural size.
This is done by preferentially shrinking the children that are most
expanded from their minimum size and then increasing that set of
children until we've found enough total shrink.
A new method is used of allocating children at integral sizes - instead
of rounding the per-child extra amount to an integer (which causes
cumulative round-off errors), compute the position as we go along in
floats and round individually for each child widget.
Extend the box-layout test to include of a test of a box being set
to various widths, starting quite narrow.
http://bugzilla.moblin.org/show_bug.cgi?id=6311https://bugzilla.gnome.org/show_bug.cgi?id=595995
If the actor isn't in a stage, then setting up the adjustment
based on the actor's size (which we can't compute) and the
size of the default stage (which isn't relevant), doesn't make
sense. Just use arbitrary default values.
The adjustments will be updated to reasonable values when first
the box is first allocated.
It's not entirely clear to me why we ever want to compute the
adjustment settings this way; perhaps we should always use
default values.
http://bugzilla.moblin.org/show_bug.cgi?id=6307https://bugzilla.gnome.org/show_bug.cgi?id=595996
The CSS specification says that the background extends to the
edge of the border (settable in CSS3 with border-clip), make
BigRectangle match this by computing an "effective border color"
as 'border OVER background'.
(If we don't want this behavior - e.g., to be able to use the
transparent borders as margins, then alternatively transparent
border handling would have to be fixed in st-widget.c, since
prior to this transparent and translucent borders were handled
differently.)
https://bugzilla.gnome.org/show_bug.cgi?id=595993
The current CSS3 border-image is close to a superset of what we were
doing for -hippo-background-image. Woot! rename StThemeImage to
StBorderImage and change parsing to look for:
border-image: <url> <number>...
Rather than
-st-background-image: <url> <length>...
percentanges for the border sizes are not currently supported, neither
are the keywords for handling of the middle part. We always do 'stretch'
for now.
https://bugzilla.gnome.org/show_bug.cgi?id=595990
Use BigRectangle to draw the border and background if there's
a border width or border radius and no border image. (Only
uniform borders are supported for now with some deviations
from the CSS model noted in the comments.)
The background color and image parameters are removed from
StWidget's draw_background() method since they were not used
for StButton (the only current user) and the encapsulation
break that they presented caused some minor problems.
Add a test case for borders, and also use borders to style
the buttons in the 'inline-style' test case.
https://bugzilla.gnome.org/show_bug.cgi?id=595993
Rather than repeating the computation of borders in many different
widget subclasses, add helper functions:
st_theme_node_adjust_for_height()
st_theme_node_adjust_preferred_width()
st_theme_node_adjust_for_width()
st_theme_node_adjust_preferred_height()
st_theme_node_get_content_box()
That are used in get_preferred_width()/get_preferred_height() and
allocate() methods to consistently apply the necessary adjustments.
This allows removing the StPadding type.
Queueing a relayout when the borders/padding change is moved from
st_widget_real_style_changed() to the invoking code to allow access
to the old StThemeNode for comparison. (Should this be added as
a parameter to the signal?)
Borders are included in the geometry adjustments, but borders
are not yet drawn.
https://bugzilla.gnome.org/show_bug.cgi?id=595993
Add support for parsing and caching the border-radius property.
Different radii for the 4 corners are supported; elliptical corners
are not supported.
https://bugzilla.gnome.org/show_bug.cgi?id=595993
Add support for passing an inline-style string when creating a
StThemeNode.
Hook this up to a new 'style' property of StWidget.
Add a test case that demonstrates using this to update font sizes
on the fly.
https://bugzilla.gnome.org/show_bug.cgi?id=595991
ShellTheme replaces both StStyle and ccss_stylesheet_t.
The interface StStylable is replaced by usage of ShellThemeNode.
A concrete node class allows some significant optimizations of property
inheritance that would have been much more difficult to achieve with
the highly abstract pair of StStylable and ccss_node_t.
Some operations that were previously on StStylable (like the
::style-changed signal) are directly on NtkWidget.
Custom properties are no longer registered as param-specs; instead you
call directly into shell theme node to look up a length or color:
shell_theme_node_get_length (theme_node, "border-spacing", FALSE, &spacing);
The dependency on libccss is dropped, while preserving all existing
functionality and adding proper parsing and inheritance of font properties
and proper inheritance for the 'color' property.
Some more javascript tests for CSS functionality are added; workarounds for
a CSS bug where *.some-class was needed instead of .some-class are removed.
https://bugzilla.gnome.org/show_bug.cgi?id=595990
To each .c and .h file, add:
/* -*- mode: C; c-file-style: "gnu"; indent-tabs-mode: nil; -*- */
'gnu' is the default anyways for Emacs, but indent-tabs-mode is not,
so this sets things up to correspond to the policy of no-tabs.
http://bugzilla.moblin.org/show_bug.cgi?id=6467
Import:
HippoCanvasTheme => StTheme
HippoCanvasThemeImage => StThemeImage
HippoCanvasStyle => StThemeNode
StThemeContext is a new class managing the theme for a stage and
global properties like resolution.
test-theme.c is a newly written test program to do verification of the
style matching and property handling rules.
Various changes are made in the import:
- Comprehensive reindentation
- guint32 pixels replaced with ClutterColor
- General pseudo-class support added
- Old-fashioned (non-bordered) background image support added, though
with no support for repeat, etc.
- Bug fixes for problems revealed by test program
https://bugzilla.gnome.org/show_bug.cgi?id=595990
Install and distribute gnome-shell.css and theme images. They are moved
down from $datadir to $datadir/theme to avoid a weirdness where we have
images in $datadir and then also in $datadir/images.
(Also moved in the source tree to avoid adding another difference between
installed and uninstalled operation.)
https://bugzilla.gnome.org/show_bug.cgi?id=595989
