If mutter was compiled with GTK+-2.0, the build will fail with a
rather cryptic message - better fail early during configure with
a proper error message.
https://bugzilla.gnome.org/show_bug.cgi?id=623889
Use GSettings for all Shell configuration. GConf is kept to read
configuration from external programs (Metacity, Nautilus and Magnifier),
but ShellGConf is removed because it's mostly useless for the few calls
we still have. Also get rid of unused GConf code in ShellAppSystem.
A basic GConf schema is still used to override Metacity defaults and
configure Magnifier in a system-wide fashion. GConf is also used as
GSettings backend via the GSETTINGS_BACKEND environment variable.
All of this will be removed when these programs have been ported
to GSettings and able to use dconf.
GLib 2.25.9 is required. Schemas are converted to the new XML format,
and compiled at build time in data/ so that the Shell can be run from
the source tree. This also requires setting the GSETTINGS_SCHEMA_DIR
environment variable both when running installed or from source tree,
in src/gnome-shell.in and src/gnome-shell-clock-preferences.in.
https://bugzilla.gnome.org/show_bug.cgi?id=617917
Update the GNOME Shell version to 2.31.2, and make corresponding
updates to dependencies:
clutter => 1.2.8
mutter => 2.31.2
gobject-introspection => 0.6.11
gjs => 0.7
To replace all calls to deprecated code, GTK+ 2.20 is required - add
some basic compatibility code, so that is still possible to build the
shell with GTK+ 2.18 when not using -DGSEAL_ENABLE.
https://bugzilla.gnome.org/show_bug.cgi?id=618258
With the transition to GTK+ 3.0, direct access to struct members
will no longer be possible.
This bumps the required minimum version of GTK+ to 2.20.
https://bugzilla.gnome.org/show_bug.cgi?id=618258
- Specify a minimum version of clutter-1.2.0
- Switch clutter branch in the moduleset to master
- Replace deprecated cogl_texture/material_unref() with
cogl_handle_unref()
- Use cogl_clip_push_rectangle() rather than cogl_clip_push()
- Replace cogl_check_extension() with strstr - should be
accurate enough.
https://bugzilla.gnome.org/show_bug.cgi?id=610679
Brute force merge these two by essentially replacing St.TextureCache
with a (renamed) Shell.TextureCache.
One function was added for convenience, namely "st_texture_cache_load_file_simple".
St.TextureCache had a function to load a texture from a filename, and it
returned NULL on error but only half the callers actually checked this. This
function is better.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
The recent cleanup of the configure.ac cleanups accidentally
removed AC_SUBST(GETTEXT_PACKAGE); more precisely restore this
section back to its original state.
https://bugzilla.gnome.org/show_bug.cgi?id=610787
Remove unnecessary checks for headers and functions, revert
changes to internationalization that introduced duplication.
(Based on a patch by Javier Jardón)
https://bugzilla.gnome.org/show_bug.cgi?id=609205
Add StIMText, which is a drop-in replacement for ClutterIMText but
uses GtkIMContext instead of ClutterIMContext.
StIMText doesn't have preedit support (would need ClutterText
changes), so isn't going to be useful for complicated input methods,
but is good enough to get dead keys and similar working.
entry.js: Simple test case of StEntry
gnome-shell.modules: Remove clutter-imcontext module
https://bugzilla.gnome.org/show_bug.cgi?id=597471
ShellTheme replaces both StStyle and ccss_stylesheet_t.
The interface StStylable is replaced by usage of ShellThemeNode.
A concrete node class allows some significant optimizations of property
inheritance that would have been much more difficult to achieve with
the highly abstract pair of StStylable and ccss_node_t.
Some operations that were previously on StStylable (like the
::style-changed signal) are directly on NtkWidget.
Custom properties are no longer registered as param-specs; instead you
call directly into shell theme node to look up a length or color:
shell_theme_node_get_length (theme_node, "border-spacing", FALSE, &spacing);
The dependency on libccss is dropped, while preserving all existing
functionality and adding proper parsing and inheritance of font properties
and proper inheritance for the 'color' property.
Some more javascript tests for CSS functionality are added; workarounds for
a CSS bug where *.some-class was needed instead of .some-class are removed.
https://bugzilla.gnome.org/show_bug.cgi?id=595990
Import:
HippoCanvasTheme => StTheme
HippoCanvasThemeImage => StThemeImage
HippoCanvasStyle => StThemeNode
StThemeContext is a new class managing the theme for a stage and
global properties like resolution.
test-theme.c is a newly written test program to do verification of the
style matching and property handling rules.
Various changes are made in the import:
- Comprehensive reindentation
- guint32 pixels replaced with ClutterColor
- General pseudo-class support added
- Old-fashioned (non-bordered) background image support added, though
with no support for repeat, etc.
- Bug fixes for problems revealed by test program
https://bugzilla.gnome.org/show_bug.cgi?id=595990
js/ui/environment.js: Split out initial UI setup (Tweener initialization,
ClutterContainer monkey-patching) into a separate file we can import from tests.
tests/: Directory for various types of tests
tests/run-test.sh: Shell script that to run tests with an appropriate
environment set up.
tests/testcommon/: Common modules and data for tests
tests/interactive/: Interactive tests
tests/interactive/box-layout.js: A sample test of StLayout
https://bugzilla.gnome.org/show_bug.cgi?id=595987
Import the core MxWidget/MxBin and their dependencies; we use the
namespace "St" (Shell Toolkit) because it is the same length as Mx
so enabling easy sharing of code, but makes it clear that this is
a friendly fork and not a literal import.
Based on a patch by Colin Walters <walters@verbum.org>
https://bugzilla.gnome.org/show_bug.cgi?id=591245
On OpenSolaris /usr/bin/python is 2.4; use AM_PATH_PYTHON to find
a newer Python. (The PYTHON environment variable can also be set
before running configure to override the search.)
http://bugzilla.gnome.org/show_bug.cgi?id=578196
Infrastructure for localization; hook up intltool, create po/
and po/POTFILES.in. We need to call bindtextdomain/bind_textdomain_codeset.
Switch to gnome-autogen.sh to call intltool.
This is a start at the "Active Appliction Item" component of the
shell design. Currently we just show the currently focused
application. When launching a new application, we show that as well.
The implementation here is not complete; basically when launching
we de-focus the active one, and the application well shows the
most recent startup sequence.
This kind of fails in the case of multiple sequences, and we
also don't correctly de-focus the current window in other
launch paths.
When AM_SILENT_RULES is available, use it to strip down the output
of make so we can see what's important rather than gigantic long
compile lines.
Use 'make V=1' to see everything again.
Fix a couple of places where we had 'cmp' rather than 'cmp' and were
getting standard-error spew about missing files when generating
enum-types.h files.
http://bugzilla.gnome.org/show_bug.cgi?id=591002
When compiling with GCC turn on -Wmissing-prototypes, and by default
turn on -Werror as well.
As with most gnome modules:
--enable-compile-warnings=minimum/maximum
Can be used to disable -Werror (they are the same)
http://bugzilla.gnome.org/show_bug.cgi?id=590998
Before, we looked up application data in several ways; the ShellAppSystem
exported just application ids (though it parsed the .desktop files internally),
and we'd create a Gio.DesktopAppInfo object (reparsing the desktop file again),
wrapping that inside a JavaScript AppInfo class, and finally the AppDisplay
would again parse the .desktop file to get the categories.
Also, to look up applications by id previously, we traversed the entire
menu structure each time.
Some qualities such as the NoDisplay flag were not easily exposed in the old
system. And if we wanted to expose them we'd have to change several different
application information wrapper classes.
All in all, it was quite suboptimal.
The theme of this new code is basically "just use libgnome-menus". We do
not call into Gio for app lookups anymore. The new Shell.AppInfo class
is a disguised pointer for the GMenuTreeEntry item.
To fix the caching, we keep a simple hash table of desktop id -> ShellAppInfo.
This lets us share the recent-app-tracking, recent-file-tracking, and
icon-drawing code between the overlay and the sidebar, without the
sidebar having to poke into AppDisplayItem and DocDisplayItem's guts.
Use code copied from GLib to close all file descriptors before we reexec ourselves
on the restart Alt-F2 command. This fixes serious memory leaks when we have mapped
graphics buffers.
http://bugzilla.gnome.org/show_bug.cgi?id=579776
The overlay looks nicer with the root window pixmap drawn on the
background. It is scaled up to twice the size, with positioning
based on the rule of thirds.
The sideshow animations shown when entering or leaving the
overlay and toggling the extended view were implemented by
Marina Zhurakhinskaya. They replace the old method of having a
black rectangle behind the workspaces that partly covers the
sideshow during transitions.
configure.ac: Add gdk-x11, clutter-x11 and clutter-glx modules.
overlay.js: Add a root window pixmap actor, make sideshow width
definitions more logical, replace the way the sideshow
animates when entering or leaving the overlay.
workspaces.js: Remove the backdrop, add helper functions for the
overlay transitions.
shell-global.[ch]: Add a method that creates an actor displaying
the root window pixmap and returning clones of it.
ShellAppMonitor now depends on gmenu to load menus.
Use the menu data from ShellAppMonitor to show a menu list.
GenericDisplay implementations can now have a sidebar area. We
handle keystrokes such as left/right explicitly.
Some internal API changes to account for the fact that a display
can have another filter in addition to the search.
For development and demonstration purposes, it's neat to be able to
record a screencast of gnome-shell without any external setup.
Built-in recording can also give much better quality than is possible
with a generic desktop recording, since we hook right into the paint
loop.
src/shell-recorder.[ch]: A general-purposes object to record a Clutter
stage to a GStreamer stream.
src/shell-recorder-src.[ch]: A simple GStreamer source element (similar
to appsrc in the most recent versions of GStreamer) for injecting
captured data into a GStreamer pipeline.
src/test-recorder.c: Test program that records a simple animation.
configure.ac src/Makefile.am: Add machinery to conditionally build
ShellRecorder.
tools/build/gnome-shell-build-setup.sh: Add gstreamer packages
to the list of required packages for Fedora.
js/ui/main.js: Hook up the recorder to a MetaScreen ::toggle-recording
keybinding.
http://bugzilla.gnome.org/show_bug.cgi?id=575290
tools/build/gnome-shell.modules: Point at master branch of Clutter (0.9)
and make gobject-introspection a dep of Clutter.
configure.ac src/Makefile.am: Use Clutter-0.9
js/ui/button.js js/ui/genericDisplay.js js/ui/overlay.js js/ui/panel.js
js/ui/runDialog.js js/ui/workspaces.js src/shell-status-menu.c:
Use ClutterText instead of ClutterLabel and ClutterEntry
js/ui/workspaces.js js/ui/genericDisplay.js: Use ClutterClone instead
of ClutterCloneTexture
src/shell-global.[ch]: Add Shell.get_event_key_symbol() to workaround
unaccessibility of clutter_key_event_symbol() to use.
js/runDialog.js js/overlay.js: Use Shell.get_event_key_symbol() as
appropriate.
* configure.ac: Look for paths to all the g-i tools, and
also get the full path to metacity
* src/Makefile.am: Remove noinst library, not necessary now
svn path=/trunk/; revision=45
notification are to the panel. A bit warty, but we don't know how we want
the final UI to look anyway. (The fact that transparency doesn't work is
a known bug.)
svn path=/trunk/; revision=44
A plugin for metacity-clutter (mutter) that initializes Javascript
and via Javascript adds an object to the mutter scene graph.
src/gnome-shell-plugin.c: metacity-clutter-plugin
src/shell-global.[ch]: Simple global-information object
js/: Directory for javascript
scripts/start-in-Xephyr: Launch metacity with our plugin
"nested" within an Xephy X server
svn path=/trunk/; revision=2
