We have always defaults to an empty ornament, so that menu items
are always aligned, even when radio items are used.
However radio items are fairly rare, so most of the time we end
up with an extra margin with no purpose. The design team now
prefers radio items to only align with each other, so that regular
items get the expected margin.
Change the defaults accordingly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2843>
gnome-bluetooth clears the list of devices when the adapter goes
away, but we cannot assume that that'll happen when powered down.
We don't want to show a (potentially outdated) list of devices
that cannot be interacted with in that case, so explicitly check
for the active state when returning devices.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2658>
In older versions of GNOME, when a menu was used for Bluetooth devices,
we tried to avoid showing the Bluetooth menu to folks who didn't use
Bluetooth.
This kept causing problems as the menu would disappear if no
devices were setup and the platform "airplane mode" removed the
Bluetooth device from the USB bus, making it impossible to detect
whether a Bluetooth device existed, compared to a user unplugging a
removable Bluetooth device.
Closes: #5749
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2488>
It is generally not possible to differentiate between systems
without bluetooth support, and systems where a bluetooth adapter
is powered down.
We work around that by tracking whether there are any set up devices,
and keep the bluetooth visible in that case, even when no adapter
is present.
However commit eeabdd150c moved updating the setting into the code
that handles adapter changes, which is exactly the place where we
carefully avoid changing the setting because it would be too
unreliable (devices may have already disappeared, or not yet
appeared).
Fix this by changing _setHadSetupDevices() to _syncHadSetupDevices()
and call that everywhere _sync() used to be called, *except* on
adapter changes.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5714
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2409>
For now, this is another simple toggle. The icon, state and
visibility reflect what the old menu did, and the top bar
icon is still only shown when devices are currently connected.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2392>
The new class abstracts away the nitty-gritty of bluetooth- and
airplane-mode handling, and exposes just what the UI needs.
This will become more important with quick settings, where there's
a stronger separation between top bar icon and quick toggle.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
There's no good reason for waiting for the proxy to be initialized
to connect signals. In fact, connecting the signal beforehand
ensures that the handler is in place when the proxy fetches the
properties, so we don't have to call the handler explicitly.
That in turn allows us to rely on the signal parameters to only process
changed properties.
To achieve that, construct the proxy manually, and then initialize
it asynchronously in a Promise.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2391>
With the porting of gnome-bluetooth to the new GListModel API the
behavior regarding removing adapters changed: It now no longer
guarantees to emit "device-removed" signals for the paired devices when
the adapter gets removed.
This means we need to do that ourselves now, so clear the list of
connected signals when the default adapter changes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2214>
Turns out this broke showing the bluetooth menu entry for adapters which
rely on the had-devices-setup property being set while turned off. These
adapters are completely removed from the system by the firmware after
powering them off, so in that case there is no default adapter anymore,
although we still want to show the menu.
This reverts commit aaf47167b5.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2214>
While _sync() does already handle the case where there's no adapter just
fine (hiding the item and the indicator), let's make the handling a bit
more obvious and add an explicit check for !this._adapter where we bail
out and hide the UI.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2188>
There's two ways bluetooth can be powered off/on for us: One way is to
go via airplane mode (which uses rfkill), and the second way is to tell
BlueZ to turn off the device. Now rfkill always has the final say on
whether bluetooth is off, BlueZ OTOH has the final say on whether
bluetooth is on.
This means when we want to know whether bluetooth is turned on, we only
have to ask BlueZ, so simply read this._client.default_adapter_powered
for that.
For turning bluetooth on or off we use rfkill, but when turning it on,
make sure it's turned on in Bluez, too.
FTR, this is exactly the same way the Bluetooth panel in Settings
handles this.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2188>
While we now deal more gracefully with adapter removals, we can
still mess up the hadSetupDevices tracking:
As adapters become available before any devices, we'll always
reset the setting to false when Bluetooth is turned on. And if
no set up device happens to be in range, it will still be false
when Bluetooth is turned off again.
To address that, only update the setting if we have an adapter
(like we do now) and we had one before (so it wasn't the adapter
itself that changed).
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1174
Our intended behavior when bluetooth is turned off is to keep
the menu visible if devices had been set up previously.
However since gnome-bluetooth@c437c729, devices are removed
first before removing the default adapter, so we now end up
always setting the property to false before checking for it.
Fix this by deferring all model changes to an idle, so that
we can process them as a unit. Do the same for proxy property
changes, as those may trigger a row-removal.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1174
Since commit 26c2cb9f65, nDevices is always the actual number of
paired/trusted devices. So when bluetooth is turned off, it is
now 0 rather than forced to 1 if devices were set up previously.
Fix this by checking the property that tracks set up devices instead.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1174
In case where only one device is connected, we want to display its name
in the menu. For that we will need more than the number of known/connected
devices, so change the function to return an array of device infos instead.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2340
Remove the `this.actor = ...` and `this.actor._delegate = this` patterns in most
of classes, by inheriting all the actor container classes.
Uses interfaces when needed for making sure that multiple classes will implement
some required methods or to avoid redefining the same code multiple times.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
ES6 finally adds standard class syntax to the language, so we can
replace our custom Lang.Class framework with the new syntax. Any
classes that inherit from GObject will need special treatment,
so limit the port to regular javascript classes for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/361
When not using arrow notation with anonymous functions, we use Lang.bind()
to bind `this` to named callbacks. However since ES5, this functionality
is already provided by Function.prototype.bind() - in fact, Lang.bind()
itself uses it when no extra arguments are specified. Just use the built-in
function directly where possible, and use arrow notation in the few places
where we pass additional arguments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/23
This D-Bus property was never been added here, which caused inconsistencies
under some scenarios (e.g. coming back from suspend) if some devices were
previously paired, since _sync() would then make the bluetooth menu visible
unconditially, because of the proxied property evaluating to 'false'.
Adding this to the D-Bus interface makes sure that it's no longer undefined
and returns the right value, fixing the bug.
https://bugzilla.gnome.org/show_bug.cgi?id=789110
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
If Bluetooth is on but there aren't connected devices, the status in the
menu reads "Not in Use". This is potentially confusing: it's a negative
statement, even though Bluetooth is on. It also sits uneasily (and looks
even more confusing) next to the submenu item "Turn Off".
Changing the string to "On" is better.
https://bugzilla.gnome.org/show_bug.cgi?id=756432
If we detected that Bluetooth devices were setup, show the Bluetooth
menu so that users can easily turn Bluetooth back on.
This is a bit of a hack, as we cannot detect whether there is a
Bluetooth adapter at all when it's disabled, so we cannot tell whether
there were any Bluetooth devices setup, at some point. This state is
saved in the gnome-shell GSettings in the had-bluetooth-devices-setup
key.
Checking whether we saw Bluetooth devices at one point is a good
enough guess of whether there will be some in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=723848
