The animation handling is kinda split between layout (for the
keyboard slide), and keyboard (for the focus window slide). It
would be nice to have more fine grained control on those, so
move the animation handling altogether to keyboard.js as a start.
This is roughly similar, except that transformations apply to
the Keyboard actor, instead of the keyboardBox (its parent). We
now queue a relayout after the animation in order to update the
chrome tracking.
The only layering break now is that we emit
layoutManager::keyboard-visible-changed in keyboard.js, its
purpose will be dropped in future commits, so leave it there for
now.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1668>
Gestures leaving the overview from a short distance result in an
ugly effect with the panel opacity transitionhaving a fixed duration.
Make this transition have the same duration (although in a hackish
way) so we avoid the ugly effect.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
The gesture internally manipulates the main adjustment so one swipe
up brings up the overview, and a second swipe up brings the app
grid. The gesture also works in the other direction to get out of
the overview.
Internally, this is delegated on the OverviewControls, so the
adjustment is not leaked out of there. This however meant open
coding the gesture interaction so it can be directed from
overview.js code.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
This will be set whenever an event controller is manipulating the adjustment.
It should enter the same transitional state it does for animations. This
will be used by the overview gesture.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
Separate this logic from _switchWorkspaceBegin() and ensure it is set
before this call. The SwipeTracker code uses the orientation to determine
whether the gesture should begin at all, so changing the orientation on
gesture begin was a bit too late.
But also, that meant the SwipeTracker was left at the default orientation,
which was vertical (unlike workspaces, and like the overview gesture).
This made both swipe trackers try to handle the same swipe, with the
WorkspacesView being doubly unfortunate (for triggering in the first place,
and for happening after the other gesture did queue relayouts on it).
Taking this logic outside of _switchWorkspaceBegin() and having the right
orientation beforehand results in both gestures looking for their direction,
and not meddle with each other.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
We now have multiple touch swipe gestures with matching fingers and
different directions set on the overview hierarchy. Accepting all
touch swipes without checking the direction makes one of these gestures
take control of input, without other gestures having a say on this.
So, look for the direction of the touch events and look if it matches
the expected orientation before accepting the gesture.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
Make the touchpad gesture keep track of its state, and enter in a
rejected state if the swipe is happening in the wrong direction.
Effectively, this means touchpad gestures are locked on a single
direction, and horizontal+vertical swipeTrackers won't be handling
events at the same time.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
We now have multiple touch swipe gestures with matching fingers and
different directions set on the overview hierarchy. Accepting all
touchpad swipes without checking the direction makes one of these gestures
take control of input, without other gestures having a say on this.
So, look for the direction of the swipe events and look if it matches
the expected orientation.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
Some actors don't have the scale applied to them directly but are
children of a scaled parent. In those case just retaining the scale will
not be enough and the scale of the actor itself needs to be adjusted
when reparenting. This could for example be seen when dragging windows
from the workspace thumbnails.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1687>
Even if activePage has been removed as part of commit 27627bd40, we've
still a reference of it in key press handler.
Given that there's no anymore an active page to redirect input to,
remove these references, so that can be handled in the proper view to
implement key-navigation.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1688>
When opening a large number of windows, the computed space and scale for
a layout can become negative due to the per-row/per-column spacing. This
is smaller than the initial values of lastSpace and lastSpace, leading
to a null return which then causes all sorts of other issues resulting
in the workspace becoming invisible.
This change ensures that the function always returns a layout, even if
it may look a bit broken and does not conform to the scale/space
requirements which are impossible to fulfill for the given number of
windows. It's better than displaying nothing, since it allows users to
move/close windows and restore this to a more usable state.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3730
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1685>
When creating an icon for the system actions search provider, set the
icon size using StIcons own icon-size property instead of ClutterActors
width and height property. That ensures the scale factor is applied and
the icon will be properly scaled on hiDPI screens.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1686>
The icon and close button might be overlapping the window actor but
were not considered in has_overlaps() which gets used to decide whether
to offscreen the actor for transparency. Since currently the icon is
visible when the preview is dragged and the whole actor is turned
transparent, the opacity will not be applied to everything as a whole
but the child actors individually. This leads to the window becoming
visible behind the icon.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1684>
Calling startTouchGesture() on the workspacesViews can change the
visibility of the workspaces if not all of them are already shown, such
as when there are more than 3 workspaces or for 3 workspaces if we are
not on the central one. This invalidates the allocation and the width
used as distance for the gesture would become 0, resulting in drag
gestures immediately jumping to the first or last workspace due to a
division by 0.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3721
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1682>
Checking whether the item is empty is now the history’s job, per the
previous two commits. The history also trims the input for us.
The effect of this is that we call _history.addItem(), and thereby move
to the end of the history, even if the input is empty (or consists only
of whitespace); clearing the input field and pressing Enter becomes a
quick way to jump back to the end of the history. (The current history
item is not overwritten if the input is empty.)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1653>
Scaling the icons all the way from/to 0 is a relatively big transition,
which is fairly distracting when playing simultaneously for multiple
previews after reaching the WINDOW_PICKER state.
Instead, tie the scale to the overview state itself, so that the animations
runs in parallel.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1654>
Back when the Dash was vertical, the size of each item was calculated
solely based on the available height. After making the Dash horizontal,
this was swapped by the available width. However, when the height of the
Dash decreases, the current code results in never scaling them up ever
again.
Fix that by making ControlsManagerLayout explicitly pass the maximum Dash
sizes. Remove the 'notify::width' handler that served the same purpose.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3651
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1638>
Remove the dummy applications page that was introduced as a temporary
step. Replace the 'page-changed' and 'page-empty' signals with a 'search-active'
boolean property.
Remove ViewSelector.ViewsPage since it's now unused, and all the page handling
mechanism. At last, since we don't use any ShellStack features anymore, simply
make it a St.Widget with a ClutterBinLayout as the layout manager.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1667>
Add a "screenshot-taken" signal from the screenshot service's internal C
implementation, and use that to trigger the camera flash visual effect
and the click sound, allowing them to run in parallel with the PNG
compression instead of waiting until the file is complete to start.
This significantly improves perceived latency on high res setups such as
4K, 5K, or dual 4K screens.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/512
Co-authored-by: Brion Vibber <bvibber@wikimedia.org>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1658>
On my local jhbuild setup some local stuff is not set up and
there's no pictures folder. This fixes a regression where it
blew up instead of saving to the home dir in this situation.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1658>
In addition to disabling the overlay when the state is not 1,
disable it also when not in the active workspace.
Make the Workspace class track the workspace's active state,
and resync the overlays when it changes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1645>
The behavior of workspaces is different depending on whether
the overview is in window picker state, or app grid state.
When in window picker state, clicking on adjacent workspaces
should only activate them, without hiding the overview; and
clicking on the active workspace hides the overview. When in
app grid state, clicking on a workspace must always hide the
overview.
Pass the overview adjustment to Workspace, and leave overview
if the overview state is bigger than WINDOW_PICKER.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1645>
The overview transition consists of getting the initial and final
states of the overview adjustment, derivating various other internal
states from them (such as the fit mode, opacities, translations, etc),
and finally interpolating the allocation boxes.
When interpolating between the fit mode, WorkspacesView uses the current
allocation box to derivate the SINGLE and ALL fit mode boxes. However,
that creates a curved path during overview transitions. What we really
want to do here is calculate the fit mode box relative to the corresponding
overview state. For example:
+----------------+----------+------------------------+
| Overview State | Fit Mode | Workspaces geometry |
+----------------+----------+------------------------+
| HIDDEN | SINGLE | Cover entire screen |
| WINDOW PICKER | SINGLE | Between minimap & Dash |
| APP GRID | ALL | 15% screen height |
+----------------+----------+------------------------+
Using the table above as the reference, when the overview transitions
between WINDOW PICKER and APP GRID, we must interpolate between
(SINGLE fit mode @ between minimap & Dash) and (ALL fit mode @ 15% screen
height). That way, we always interpolate the final boxes, which corrects
the odd path that workspaces follow during this transition.
Make the WorkspacesView of the primary monitor use these cached boxes
when the overview is in the middle of a transition, and the fit modes of
the initial and final state differ, to calculate the workspaces positions.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
It makes more sense in a spatial overview that the app grid
comes and goes to somewhere in the screen, instead of fading
in and out into the void.
Make the app grid rise from the bottom of the screen.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Move AppDisplay, WorkspacesDisplay, and ThumbnailsBox from ViewSelector to
ControlsManager. This allows to always allocate the correct size for AppDisplay,
and will enable for a plethora of further improvements. The end goal is to
completely remove ViewSelector, and let ControlsManager handle the layout of
everything that's visible in the overview.
For now, replace the apps page with a dummy actor in ViewSelector.
Adjust various callers around the codebase to not access the ViewSelector
directly from the overview anymore.
Bind the opacity of the primary workspace to WorkspaceDisplay's opacity. This
allows removing the parent opacity hack in place, which will be done by the
next commit.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Now that Overview is able to ease into any state, be it window
picker or app grid, we can move this ViewSelector method to
Overview itself, which is its rightful place to live.
Remove ViewSelector.showApps(), and make all callers call
Main.overview.show(ControlsState.APP_GRID). Also make sure the
show apps button is correctly toggled.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Next commits will requires ControlsManager to animate to different
states, depending on how Overview is called. Add a new 'state'
parameter to ControlsManager's, and OverviewActor's animateToOverview,
and Overview.show().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Remove Workspace.zoomTo/FromOverview(), they're unused now. Rename
everything up to ControlsManager to prepareToEnter/LeaveOverview(),
since these classes don't run the animation anymore.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
WorkspacesView uses the floating layout when the overview is in window
picker mode, and the session layout when the overview is in app grid
mode. Up until now, the fit mode adjustment was used to derive the
workspace mode, but it is incomplete as it doesn't have the full range
of workspace states.
Make ViewSelector cascade the overview adjustment to WorkspacesDisplay,
and use the overview adjustment itself to derive the workspace mode.
Extra workspaces don't have to account for the fit mode, and thus are
basically a clamp(state, 0, 1) of the overview state. However, don't
call animateTo/FromOverview() anymore, since they ease the workspace
mode adjustment.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Boy, does this commit feel good.
While the workspaces view on the primary monitor *appears* as part of
the overall overview hierarchy, this hasn't actually been the case
until now. We synchronized its size and (stage) position to match
the workspaces display, but actually kept in a separate layer for
the transitions to and from the overview.
But now that the new layout manager slides out completely during the
overview transitions, the workspaces display starts out covering the
entire work area, which is exactly what we need for the transition.
So finally stop faking it, and actually make the primary workspaces
view a child of the workspaces display.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Instead of delegating it to ViewSelector, make the transition to and from
overview ease the main state adjustment.
This commit temporarily breaks these animations, but on the other hand
introduces an important feature: ViewSelector is always allocated to the
actual size. This will finally allow for adding WorkspacesView as a child
of WorkspacesDisplay, and finally remove the actual geometry hack, which
is what next commit is about.
This commit also effectively reverts b64103efc.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Instead of directly accessing ViewSelector and calling these methods
there, cascade the calls to OverviewActor, ControlsManager, and finally
ViewSelector. Also move the opacity transition to OverviewActor.
This commit has no functional change.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Currently, ActivitiesContainer reacts to showAppsButton and
transitions between app grid and window picking states on
its own. In the future, we want full control over this.
ControlsManager already has a state adjustment that represents
all possible overview states. Propagate this adjustment up to
ActivitiesContainer, and use it to drive the transition.
This requires moving the callback to the showAppsButton to
ControlsManager, since now it control the state adjustment
itself, not ActivitiesContainer's adjustment.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
In the future, we want to tightly control the state of the
layout throught gestures, which requires hooking everything
together with adjustments. This is the first step in this
direction.
Add a new custom layout manager for ControlsManager that
allocates the search entry, the view selector, and the Dash,
vertically.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Currently, gnome-shell uses the wrong scrolling direction for
horizontal scrolling events.
When dx < 0 for a smooth scroll event, then the scrolling direction is
supposed to be Clutter.ScrollDirection.LEFT, instead of
Clutter.ScrollDirection.RIGHT, as dx is smaller than 0.
Fix this issue by swapping the values LEFT and RIGHT.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1665>
It is possible for an initiated session to complete without
a request if polkit can authenticate the action without user
input. We fail to clean up after ourselves in that case, as
the cleanup is done after the dialog is closed.
The dialog can still be shown when the code that hides existing
dialogs while the screen is locked shows it on unlock. But as
the session was closed, the dialog is now defunct and cannot
be dismissed by the user.
Fix this by running the cleanup on close() when the dialog
wasn't shown.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3701
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1662>
The children variable holds the icons that were originally in
the dash. For the separator visibility, we should consider the
icons that are in the dash after the update, so we must consider
additions as well as removals.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1659>
Previously we used a bunch of heuristics for this. We checked if velocity
was directed towards the nearest snap point and its value was larger than
a threshold. If it is, we completed the swipe, otherwise we cancelled it.
This was good enough at the time, because this code was originally written
for back/forward swipe. Since then, the swipe tracker was extended to
handle arbitrary snap points and not just 0 and 1, or -1 and 0, depending
on text direction. After that it was iterated on, but never significantly
redone.
This worked well enough, but had two problems:
1. In some cases, notably overview, it may be wanted to be able to swipe
through multiple pages at once. This wasn't really possible because we
always picked the adjacent snap point.
2. Since we can't do that well, we want to restrict swipes to one page at a
time. It was done in a rather hacky way by clamping the position into
[-1, 1] range from the place where we started the swipe. This works
if we start the swipe from idle position, but if an animation was
already going, the range would be clamped to arbitrary values, and very
likely containing only one snap point, which we already swiped past at
this point. In this case, finishing the swipe would cancel it regardless
of velocity. This means that if one tries to quickly move through
carousel pages via swiping, half of the swipes will be inexplicably
cancelled.
We'll use the deceleration formula from
https://medium.com/@esskeetit/how-uiscrollview-works-e418adc47060#10ce
to calculate then projection point, then pick the nearest snap point and
calculate the duration as we did before. It works well enough for short
distances, but has two problems:
1. It caps the maximum distance at a pretty low value - about 5 pages in my
testing.
2. With how we pick the nearest snap point, it's too easy to accidentally
cancel the swipe,
To combat the first problem, we can modify the curve: only use linear
function at small distances, and smoothly transition it to a parabola
further.
For the second problem we can add two special cases: first, if the swipe
ended up between the initial snap point and the next one, we always prefer
the latter. Second, a good old velocity threshold for cancelling.
We'll also use a slightly smaller deceleration value for touchpad: 0.997
instead of 0.998.
Now that we can pick any snap point, the [-1, 1] clamping doesn't make
sense anymore, so instead let's replace it with a more flexible
mechanism: if we're near a snap point, pick its adjacent snap points.
Otherwise, take the two nearest snap points, and take their adjacent
snap points. This way we have 3 snap points to choose from when
starting a swipe from an idle position, and 4 if we start during an
ongoing transition.
This way, if we've just swiped from snap point n to n+1, the transition
will pick snap points n-1, n, n+1, n+2 and if we swipe again, we will
likely land on n+2. During that transition, if we swipe again, it will
likely have already passed the snap point n+1, so this time the available
snap points will be n, n+1, n+2, n+3, so we can swipe again and it will
still complete, and so on.
This will make it easy to allow multi-page swipes as well, by just
removing the clamping.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1647>
In some cases we may get anevent with very low delta at the end of the
swipe. While we can't completely ignore them, we can smooth them using a
scroll history, similarly to what GTK kinetic scrolling does: keep track
of the last 150ms of events, and sum their deltas when calculating the
velocity.
The logic is based on what GTK does in GtkGestureSwipe and
GtkEventControllerScroll.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1647>
Let empty input result in an error, just like other invalid commands
(bad syntax, nonempty whitespace, etc.). GLib already has an error
message “Text was empty (or contained only whitespace)” which it shows
for whitespace-only input, so letting that message apply also to empty
input makes sense.
This requires some tweaks further down the file to avoid interpreting
empty input as an empty path (relative to the home directory) and then
opening the home directory.
Part of https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3183.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1442>
Resource icons are added to the fallback icon theme, so they won't
get used if a matching icon is found in the configured theme.
That includes fallback names, so Adwaita's "window-close-symbolic"
takes precedence over "window-close-24-symbolic" in hicolor.
Fix this by using a custom name for a custom icon.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1640>
The Message class this is derived from unconditionally adds a close
button with 0 opacity that only gets shown on hover for messages that
can actually be closed. The MPRIS MediaMessage however can never be
closed and having a close button can cause the title to be cut short
unexpectedly.
Similarly the secondary text which other notifications use to display
the notification time is always left empty here as well.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3664
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1632>
grabHelper is passing a boolean argument to onUngrab() callback function
and since commit 1acbdcc9b3 we'd end up adding it to to the callback list or
we'd try to invoke it:
(gnome-shell:3490851): Gjs-CRITICAL **: 17:19:20.460: JS ERROR:
TypeError: func is not a function
onComplete/<@/media/M2/GNOME/gnome-shell/js/ui/appDisplay.js:2407:56
onComplete@/media/M2/GNOME/gnome-shell/js/ui/appDisplay.js:2407:40
_makeEaseCallback/<@/media/M2/GNOME/gnome-shell/js/ui/environment.js:85:13
_easeActor/<@/media/M2/GNOME/gnome-shell/js/ui/environment.js:170:64
Use an arrow function so that we can control the parameters we pass
to popdown.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1635>
This get's rid of the single-indicator introduced in one of the latest
commits. This was causing the accessibility pill in the top panel
to have different padding from the keyboard layout pill.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1615>
So far, we couldn't allow workspace scrolling outside the overview
because scroll events were always sent to clients. However mutter
was changed recently to pass on scroll events when the mouse button
modifier (usually super) is pressed, which allows us to enable the
same workspace scrolling as in the overview now.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1612>
The design now calls for super-scroll for workspace switching
in the session, however it is currently only possible for
SwipeTracker to either handle scroll events or not.
In order to support the new use case, add a new :scroll-modifiers
property that allows specifying modifiers for which scroll events
are handled.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1612>
The code to update the actor position based on the cursor and current
scale was run in a 'new-frame' handler. This is working fine when
animations are enabled, but when they are turned off this does not work.
This is because the 'new-frame' signal is emitted before the changes for
that frame are applied. So with animations off the position was only
ever updated with the starting values. As a result the shrunk actor was
not being dragged by the position where it was clicked, but by where it
was clicked in the original size, which is likely not even on the shrunk
actor.
This change now also updates the position in the onComplete handler
which gets run with the final scale, even if the duration is 0.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/1699
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1627>
Next commit will bind the workspace state adjustment to the snap
adjustment in WorkspacesView, and we'll need the preparation
steps but not the easing of the state adjustment.
Split preparation steps from zoomFromOverview() into a new method
prepareToLeaveOverview().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
As per the latest mockups, then horizontally snapping, the active
workspace should be highlighted. Because WorkspacesView clips to
allocation, we cannot simply scale up the active one. Instead,
scale down the inactive ones.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
Synchronizing the actual geometry while animating from / to the overview can
break the animation. Let's prevent that. This code will go away soon anyway,
but to not lose bisectability, it's better not to leave it misbehaving until
then.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
When vertically snapping, WorkspacesView currently allocates workspaces
side-by-side, then applies an extra step of translation to center to
the active workspace. This extra step, however, gets in our way because
now we need tighter control of the workspaces positions in allocation,
in order to properly interpolate them.
Move the translation of workspaces to the allocation code itself, and
remove the extra translation step.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
Currently, WorkspacesView positions each workspace on a
per-page layout, each page with the allocated width and
height of WorkspaceView. This layout doesn't work well
with horizontal workspaces.
Layout workspaces side by side, instead of per page. The
layout is influenced by a "fit mode", which reflects the
different behaviors exposed in the mockup. This fit mode
represents whether a single or all workspaces will fit
available geometry.
The single fit mode is always used for now. Next commits
will make it switch to the all fit mode when in the app
grid state.
The translation_{x,y} also needed to reflect the switch to
a side-by-side layout, and use the geometry of the workspaces
to determine the offset. Notice that, when the fit mode is ALL,
there's no translation applied.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
Nowadays gjs allows to omit get/set accessors for read-write properties,
and will define reasonable defaults in that case. In many cases we don't
need anything more than the default handling, let gjs handle those props.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1611>
The app grid itself now is horizontal, and is displayed beneath
workspaces, above the dash. This makes the indicator animations
out of place, as they're not coming from the edge anymore.
Use PageIndicators for both FolderView and AppDisplay.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1629>
The new window preview overlay requires getting the app icon for a
window from the window tracker when it gets initialized. The window
tracker listens for the same 'window-added' signal on the MetaWorkspace
that the gnome-shell Workspace listens for to add the window preview.
The window tracker however reconnects all its signal handlers whenever
the number of workspaces changes, which means that its signal handlers
get called after the ones in Workspace ones. So by the time the
'window-added' handler in Workspace is called, the window tracker does
not have an app associated with the window.
To fix this ensure that all window related signal handlers in Workspace
are run after the ones in the window tracker.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3656
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1625>
Currently, there's one animation for the whole canvas. While it looks fine
with just one screen, it causes windows to move between screens when
switching workspaces. Instead, have a separate animation on each screen,
and sync their progress so that at any given time the progress "fraction"
is the same between all screens. Clip all animations to their screens so
that the windows don't leak to other screens.
If a window is placed between every screen, can end up in multiple
animations, in that case each part is still animated separately.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1213
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
Currently, the workspace swipe transition only has one workspace in each
direction. This works until you try to do multiple swipes in quick
succession. The second swipe would continue the existing transition, which
only has 2 or 3 workspaces in it, and will hit a wall.
To prevent this, take all workspaces and arrange them into a column or row,
depending on the layout, and use that as a transition.
For the transition that happens when focusing a window on another workspace
(for example, via Alt+Tab), still use only two workspaces instead of all of
them.
Since we don't support layouts other than single rows/columns anymore,
diagonal transitions aren't supported anymore, and will be shown as
horizontal or vertical instead.
Since nw alt-tab and gesture transitions are different, don't allow to do
both at once, that is, disable swipe tracker when a programmatic transition
is going. This will also conveniently cancel a gesture transition if a
programmatic one is initiated while a gesture is in progress.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2612
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
In future we will need to use window clones to better support multiple
monitors. To avoid having to hide every window, show wallpapers behind
the workspace transition: one per monitor.
Put the wallpaper into a separate class right away, later it will be
useful to make the animation per-monitor.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
Simplify the code a bit. The workspace group is relatively self-contained,
so split it from the general animation. Reimplement _syncStacking().
This will help a lot later, with workspace strip and multi-monitor support.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
We always request a natural width based on the maximum thumbnail scale,
but may very well use a smaller scale when allocating. This currently
results in thumbnails being off center, fix this by distributing any
extra space evenly before allocating thumbnails.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1620>
Accessing GObject properties from JS has proven to be quite slow because
of the JS->C->JS roundtrip involved. With the WindowPreview this
actually has an impact since we're accessing those properties very often
while creating new layouts.
So cache the boundingBox and the windowCenter properties of the
WindowPreview using a this._cachedBoundingBox JS object. This might
speed up opening the overview with lots of open windows significantly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
Make computeScaleAndSpace() return an array including scale and space so
we no longer have to access the layout object from outside.
With this we also no longer need to set layout.space, since only the
scale property is needed in computeWindowSlots().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
Start cleaning up the whole mess around the layout object a bit and
return a new object in the LayoutStrategies computeLayout()
implementation. This object is supposed to be opaque to the API user and
will only be passed to the layout strategy.
For now, keep setting a few things on that object from outside, we'll
clean that up later.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
Only keep computeLayout, computeWindowSlots, computeScaleAndSpace and
the contructor in the superclass, the rest is actually layout specific
and won't apply anymore when we introduce the new vertical layout
strategy.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
Move the background to the Workspace class by introducing a new container
called WorkspaceBackground, which handles clipping the background to the
workarea.
Move the click action from WorkspaceDisplay into each workspace.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1599>
When the original animation was implemented, workspaces would only
ever be added at the end. We therefore got away with not having a
separate EXPANDING stage corresponding to the existing COLLAPSING
one when animating out.
Since support for creating in-between workspaces via DND was added,
this is no longer the case. And now that the thumbnails are centered,
the jump is quite noticeable.
Address this by adding new transitional states, so that we can
expand new thumbnails before scaling them in.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1609>
Make the slide property control the workspace scale, so that new workspaces
scale up, and destroyed workspaces scale down. The scale is done horizontally,
and only slightly vertically, as per design direction.
Rework the state tracking mechanism to remove the COLLAPSING state, since there's
no split between sliding out and collapsing anymore. Also remove the corresponding
'collapse-fraction' property from WorkspaceThumbnail.
Make ThumbnailsBox.vfunc_get_preferred_width() consider the slide-position property.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
There are situations where MetaWorkspaceManager and ThumbnailsBox disagree
on the number of workspaces, for example when animating them out. It's more
important to follow the visible number of workspaces while they're updated.
Make vfunc_get_preferred_width() and vfunc_get_preferred_height() use the
current number of workspace thumbnails to calculate their sizes, instead of
MetaWorkspaceManager's n-thumbnails property.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
