Commit Graph

5435 Commits

Author SHA1 Message Date
Ray Strode
77f2e3abde gdm: fix banner allocation computation
The code to figure how how much room that banner had was wrong.
This commit fixes it.

https://bugzilla.gnome.org/show_bug.cgi?id=751517
2015-06-26 18:04:39 +02:00
Rui Matos
a341b74aeb AllView: prevent accessing a NULL effect
In some cases we might be allocated a size such that
this._grid.topPadding and this._grid.bottomPadding are both 0 which
means that the ScrollView fade effect gets removed. In that case don't
try to access the effect since it will be NULL.

https://bugzilla.gnome.org/show_bug.cgi?id=750714
2015-06-26 18:04:11 +02:00
Rui Matos
9e0a5fa3a9 Revert "Revert "keyboard: Handle touch events""
And make these only handled on wayland. There's a plethora of issues
around touch passive grab and touch/pointer doubly handling to use
these right away on X11, so we stick to single-touch/pointer there.

This reverts commit 032a688a72.

https://bugzilla.gnome.org/show_bug.cgi?id=750287
2015-06-02 17:59:41 +02:00
Florian Müllner
49856d4961 windowMenu: Close when corresponding window goes away
The menu is clearly associated with a particular window, so keeping
it around when the window is gone doesn't make sense - in case of
the window menu, it is actually harmful as every action will act on
the invalidated window and result in a crash. So just dismiss the
menu when the menu is unmanaged.

https://bugzilla.gnome.org/show_bug.cgi?id=749529
2015-05-21 18:21:28 +02:00
Florian Müllner
4db34fca36 layout: Set initial visibility of fullscreen-tracking chrome
When chrome is added with the trackFullscreen parameter, the actor's
visibility will be updated automatically whenever its monitor's
fullscreen state changes. However as we currently ignore the fullscreen
state at the time the chrome is added, the initial visibility may well
be incorrect - fix this by updating the initial visibility as necessary.

https://bugzilla.gnome.org/show_bug.cgi?id=749383
2015-05-21 14:01:35 +02:00
Florian Müllner
3e8b7faab8 messageTray: Emit signal when notifications are enabled/disabled
Since the introduction of per-source notification policy in commit
098bd4509b, the NotificationPolicy::enable-changed signal has been
used to track the 'enable' setting. However as we never actually
emitted that signal, this never worked without a restart - oops.

https://bugzilla.gnome.org/show_bug.cgi?id=749279
2015-05-14 15:15:54 +02:00
Rui Matos
2a3e410d71 ScreenShield: only inhibit suspend if we're the active session
If we aren't the active session clutter can't animate and thus we
can't expect the shield to be shown before releasing the suspend
inhibitor so we should release it immediately when becoming inactive.

https://bugzilla.gnome.org/show_bug.cgi?id=749228
2015-05-14 13:59:48 +02:00
Rui Matos
518e7d9fc5 ScreenShield: tie the suspend inhibitor to our isActive property
The whole point of holding a suspend inhibitor is to be able to lock
before suspending.

Currently, when resuming we immediately take the inhibitor without
checking that we're locked which means that we won't be able to
release this inhibitor if we don't unlock at least once.

To prevent that and to better match the inhibitor's intention in the
first place, we can tie the inhibitor with not being locked. In
practice, we also want to let the locking animation finish before
suspending, so we'll tie the inhibitor with not being active
instead.

https://bugzilla.gnome.org/show_bug.cgi?id=749228
2015-05-14 13:59:48 +02:00
Rui Matos
0954efd875 ScreenShield: ensure we don't leak logind inhibitors
This could happen if we are VT switched away and an animated
activation is requested because we're preparing to enter sleep. Since
we don't animate in this case we'd never reach
_completeLockScreenShown() before coming out of sleep, at which point
we _inhibitSuspend() again and would leak the previous inhibitor.

https://bugzilla.gnome.org/show_bug.cgi?id=749228
2015-05-13 19:00:53 +02:00
Florian Müllner
79c020fdb9 panel: Set up 'open-state-changed' handler on menu changes
Commit 08690d658f generalized the banner-blocking behavior of the
dateMenu to all menus that would obscure the banner. However setting
up the 'open-state-changed' handler only when an indicator is added
does not work for indicators that change their entire menu (like the
app menu) - we currently end up with menus with no connected signal
handler, and throw an error when trying to disconnect an invalid
signal ID.
To address this, add a new PanelButton::menu-set signal and use that
to set up the 'open-state-changed' handler.

https://bugzilla.gnome.org/show_bug.cgi?id=745910
2015-04-30 18:34:09 +02:00
Meet Parikh
95c903aa40 panel: Block banners when opening menus that would overlap
We currently block banners while the time+date menu is open, as it
would obscure the notification. However it is not necessarily the
only menu for which this is the case, so generalize the behavior
to all menus that would overlap banners when open.

https://bugzilla.gnome.org/show_bug.cgi?id=745910
2015-04-25 09:57:56 +02:00
Meet Parikh
e4974beebf panel: Move notification banners below time+date dropdown
As notifications appear in the time+date dropdown's message list, there's
a strong relationship between notification banners and the menu. However
while the time+date menu is centered by default, which matches the banner
position, its actual position depends on the session mode - in particular
it is moved to the right in classic mode.
Reinforce the relationship in these cases by moving notification banners
underneath the time+date menu.

https://bugzilla.gnome.org/show_bug.cgi?id=745910
2015-04-25 09:57:56 +02:00
Florian Müllner
5ec9f15500 messageTray: Make notification banners unfocusable
Unlike entries in the calendar's message list, banners are not subject
to the normal keynav chain, and making the banner actor itself unfocusable
allows for the focus to be moved to the action area when expanded.

https://bugzilla.gnome.org/show_bug.cgi?id=747205
2015-04-16 18:32:35 +02:00
Florian Müllner
da3e5f9746 legacyTray: Decrease visible width when concealed
Now that the tray is shown temporarily when a tray icon appears,
we can decrease its visible width when concealed to interfere less
with window content without hurting discoverability.

https://bugzilla.gnome.org/show_bug.cgi?id=746787
2015-04-14 21:57:55 +02:00
Florian Müllner
594a227bc1 legacyTray: Temporarily reveal tray when icons are added
There is a balance to hit between discoverability and getting out
of the way, and the legacy tray currently fails in both regards.
To address the first issue, temporarily reveal the tray when a
new icon is added.

https://bugzilla.gnome.org/show_bug.cgi?id=746025
2015-04-14 21:57:54 +02:00
Florian Müllner
7277744dc0 calendar: Allow to dismiss resident notifications
Resident notifications are not really a thing anymore with the new
design, so all the user sees are some notifications that mysteriously
cannot be closed. That's utterly confusing, stop doing that.

https://bugzilla.gnome.org/show_bug.cgi?id=746860
2015-04-14 21:57:54 +02:00
Rui Matos
5afd04781c keyboard: Add a way to use the OSK on shell chrome in wayland sessions
libcaribou was designed to generate X events which works under wayland
sessions for X clients but obviously doesn't work for wayland clients
and for shell chrome.

This patch adds a simple caribou display adapter which inherits from
its X display adapter and allows us to continue to work for X clients
and at the same time makes the OSK work on shell text entries by
sending key events directly to the focused text actor.

Making the OSK work for wayland clients requires much bigger changes
at various levels in the stack and either not using libcaribou or
re-working it substantially so that's left for future work.

https://bugzilla.gnome.org/show_bug.cgi?id=747274
2015-04-14 19:34:13 +02:00
Florian Müllner
a0868bac6b telepathyClient: Keep source alive while channel is open
Sources are destroyed with their last notification. This is usually the
correct behavior, however in case of chat sources, the corresponding
telepathy channel might still be open, and any further messages that
should trigger a notification are lost because chat sources are only
created when telepathy's channel dispatcher notifies us about a channel
(via ObserveChannels).
Loosing messages like this is unexpected, so keep chat sources around
even without notifications while the channel is open.

https://bugzilla.gnome.org/show_bug.cgi?id=747636
2015-04-11 22:53:42 +02:00
Florian Müllner
265b1f0292 telepathyClient: Disentangle source and notification
Currently the lifetime of a chat source and its single notification
are tied together. While this apparently makes sense, it means we
will lose all follow-up notifications when a source is destroyed
with the corresponding telepathy channel left open. We will fix this
soon by tying the source to the channel's lifetime rather than the
notification, prepare for this by recreating the notification if
necessary.

https://bugzilla.gnome.org/show_bug.cgi?id=747636
2015-04-11 22:53:35 +02:00
Florian Müllner
2c12f3a509 telepathyClient: Fix removal of timestamp timeout source
Timestamps were always handled by the notification rather than the source,
so that code never worked.
2015-04-10 16:10:02 +02:00
Florian Müllner
0141a2be9e messageTray: Remove dead code
The "clearable" concept is no longer relevant with the new design, not
to mention that resident sources are no longer a thing either ...
2015-04-10 14:59:24 +02:00
Shivam Mishra
6660342d2f authPrompt: Fix hang if user types password really fast
It's possible for a user to type their password so quickly
that GDM hasn't even had time to ask for the password yet,
much less have time to process the answer.
In that situation, we tuck the user response away as
_preemptiveAnswer, and pass it along to GDM when GDM is finally
ready for it.
The problem is, there's a bug in the code, where we send
null for the service name in the answer, instead of the right
service name (say "gdm-password").
This commit addresses the bug by making sure we don't pass the
answer along, until the service name is properly set in
_queryingService. To ensure that, answering query (answerQuery)
based on _preemptiveAnswer has been shifted right below
this._queryingService = serviceName;

https://bugzilla.gnome.org/show_bug.cgi?id=737586
2015-04-07 16:02:21 -04:00
Rui Matos
2f228e21da status/keyboard: Backup the whole MRU list while in password mode
Instead of saving only the current input source when entering password
mode, let's save the whole MRU list so that we can restore it when
returning to normal mode.

This is closer to user expectations since password mode is a transient
and short lived state.

https://bugzilla.gnome.org/show_bug.cgi?id=746605
2015-03-30 17:51:18 +02:00
Clément Guérin
8e802fd32f gdm: use integer coordinates for login dialog actors
If the login screen actors aren't placed at pixel
boundaries then they will show up blurred with fuzzy
text.

This commit ensures all actor allocations are floored
to integer coordinates.

https://bugzilla.gnome.org/show_bug.cgi?id=746912
2015-03-27 17:25:06 -04:00
Giovanni Campagna
e87656af16 WorkspacesView: remove unused GSettings
https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:12:25 -07:00
Giovanni Campagna
8327dbd611 System: update lock screen at construction
Will make sure that change notifications are enabled by reading
the value at least once

https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:12:25 -07:00
Giovanni Campagna
e1b575dddc System: remove unused GSettings
https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:12:22 -07:00
Giovanni Campagna
018025dada dash: use global settings instead of own settings object
Makes it easier to reason about change notifications

https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:11:22 -07:00
Giovanni Campagna
49fe0335ee status/a11y: invert connection to changes and initial read
If there is no signal connected to changed, get_value() will
not subscribe to notifications and we might miss changes.

https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:11:22 -07:00
Giovanni Campagna
bbe417121c Magnifier: invert connection to settings changes and initial read
If there is no signal connected to changed for a key, get_value()
will not subscribe to changes.

https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:11:22 -07:00
Giovanni Campagna
0068098996 Background: add a comment for questionable GSettings usage
BackgroundSource relies on Background to watch its own settings.
Add a comment to explain that.

https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:11:22 -07:00
Giovanni Campagna
36d9cc329d ExtensionPrefs: remove unused GSettings object
Each ExtensionRow has its own

https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:11:22 -07:00
Giovanni Campagna
1f2e53dd15 AppDisplay: use global settings object
We don't need a different GSettings object for each app or
favorite item.

While it practice it does not change much (AddMatch is still
obviously sent out), it minimally reduces the overhead on
changes, and makes for cleaner code.

https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:11:22 -07:00
Giovanni Campagna
048a14f1f3 Search: use the same settings object for loading search providers
In recent glib, change notifications don't actually happen unless all
keys have been read, in an effort to reduce unnecessary dbus
traffic for shortlived GSettings object and avoid AddMatch calls.
But we care about changes here, so we need to make sure we're
subscribed, and an easy way to do so is to reuse the same object
to watch for changes and to load the active providers at startup.

https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:11:22 -07:00
Giovanni Campagna
fd6ef482f0 Search: watch for changes to enabled as well
When introducing support for "default disabled" search providers
this part was overlooked, so enabling a default disabled provider
would be ignored until the next login.

https://bugzilla.gnome.org/show_bug.cgi?id=746509
2015-03-27 13:11:22 -07:00
Giovanni Campagna
d8926b96e2 Telepathy: hide chat notifications when focusing the app
When the chat app is focused, we should hide all banners immediately.
A good way to do so, without tracking which app is focused, is
to look for messages that are acked when the banner is unexpanded,
which implies they were acked by some other telepathy client.

https://bugzilla.gnome.org/show_bug.cgi?id=746364
2015-03-27 13:10:52 -07:00
Giovanni Campagna
934ec3c3fe TelepathyClient: fix ackowledging chat messages
ChatSource relies on the 'expanded' signal on the banner to
ack messages, but no code ever emits that.

https://bugzilla.gnome.org/show_bug.cgi?id=746364
2015-03-27 13:10:52 -07:00
Adel Gadllah
b00a1d6b7f Revert "Revert "Give user 48ms to read each character of a PAM message, earlier it was 16ms""
I mean't to attach that to the bug not revert it.

This reverts commit 23a9fb0314.
2015-03-27 14:36:05 +01:00
Adel Gadllah
d24abab4a8 Revert "Revert "windowManager: Block dynamic workspace updates while showing the popup""
This was an accident.

This reverts commit 5e26d0c90c.
2015-03-27 14:34:28 +01:00
Adel Gadllah
23a9fb0314 Revert "Give user 48ms to read each character of a PAM message, earlier it was 16ms"
Seriously there has to be a better way to deal with this then slowing down
login for messages that hardly anyone cares about.

https://bugzilla.gnome.org/show_bug.cgi?id=720885

This reverts commit 8897385714.
2015-03-27 14:33:52 +01:00
Adel Gadllah
5e26d0c90c Revert "windowManager: Block dynamic workspace updates while showing the popup"
This reverts commit aeb971c33a.

https://bugzilla.gnome.org/show_bug.cgi?id=720885
2015-03-27 14:32:27 +01:00
Shivam Mishra
aeb971c33a windowManager: Block dynamic workspace updates while showing the popup
Pause dynamic workspace management while workspaceSwitcherPopup
is shown so as to eliminate infinite creation and destruction of
workspaces, thus preventing stuttering while trying to move a
window to last workspace.
Add _isWorkspacePrepended flag to make sure only a single workspace
is prepended at a time thus preventing the possibility of prepending
infinite workspaces while dynamic workspace management is on pause.
Prepend a new workspace by creating a new workspace instead of only
shifting the windows to next workspace so that the workspaceSwitcherPopup
may appear in sync with what's happening behind the scene and display
correct number of workspaces.

https://bugzilla.gnome.org/show_bug.cgi?id=712778
2015-03-27 14:13:27 +01:00
Sarvjeet
8897385714 Give user 48ms to read each character of a PAM message, earlier it was 16ms
User read time per character has been changed from 16ms to 48ms because the
message of information about last login is displayed for half a sec that is not
a good user experience. So time to read a character is increased to 48ms from 16ms.

https://bugzilla.gnome.org/show_bug.cgi?id=720885
2015-03-26 18:42:00 -05:00
Devyani Kota
e2a17fa8b4 workspacesView: Allow switching workspaces in overview with pageUp/Down
To switch workspace by keyboard in the overview, the user currently
has to use the normal keybinding. However as the vertical alignment
of workspaces makes them very similar to pages in the app picker, it
makes sense to also support the standard pageUp/pageDown keys.

https://bugzilla.gnome.org/show_bug.cgi?id=742581
2015-03-26 21:58:59 +01:00
Florian Müllner
14da6b68dc windowManager: Don't allow move-to-workspace for always-sticky windows
"Moving" a window to another workspace doesn't make sense when it cannot
be unstuck, and is potentially confusing if a new workspace is added at
the start/end - just don't do anything in that case.

https://bugzilla.gnome.org/show_bug.cgi?id=746782
2015-03-26 12:19:33 +01:00
Florian Müllner
9a01a7ae07 workspacesView: Add missing semicolon 2015-03-26 00:05:38 +01:00
Rui Matos
c3bf4a325d Refresh all background instances after suspend if needed
NVIDIA drivers don't preserve FBO contents across suspend / resume
cycles which results in broken backgrounds. We can work around that by
forcing a refresh when coming out of suspend.

https://bugzilla.gnome.org/show_bug.cgi?id=739178
2015-03-24 11:45:04 +01:00
Florian Müllner
9934529a0b loginDialog: Move long session-list menus to the side
Currently the menu position below the button means that the menu
can extend to roughly half the screen height before ending up partly
off-screen. This is plenty of space for commonly installed sessions,
but some users have a significantly higher number of sessions in the
list. Move the menu to the side of the button in that case to maximize
the vertical space the menu may take up.

https://bugzilla.gnome.org/show_bug.cgi?id=734352
2015-03-23 20:25:21 +01:00
Florian Müllner
ef6e8f5bb2 legacyTray: Remove pointer barrier when the tray is hidden
https://bugzilla.gnome.org/show_bug.cgi?id=746579
2015-03-23 20:23:01 +01:00
Florian Müllner
2ce7a3baa6 legacyTray: Stack tray below modal dialogs
System modal dialogs should disable other UI while open, so make
sure the legacy tray does not appear on top of them.

https://bugzilla.gnome.org/show_bug.cgi?id=746323
2015-03-23 20:20:52 +01:00