Fix displaying documents in the document browse and refreshing the selection
when the results have changed.
Make sure we are passing the appropriate flag to _redisplay() in GenericDisplay.
Make sure we set this._appsStale to true if there was a change in the
applications set.
Don't call _refreshCache() from the AppDisplay constructor.
Don't short-circuit the call to _refreshCache() from _redisplay() on initial load.
Rename _redisplayFull() to recreateDisplayItems() and remove adding an
actor to the actual result list in _addDisplayItem() because we redo adding the
actors to the list in _redisplayReordering() anyway to ensure that we add
them in the right order.
Based on a patch from Colin Walters.
Unlike icons in the application well, do not show the glow used to
indicate running apps. It is somewhat redundant here. These are all
running apps and it is fairly clear from the window list if there are
multiple instances available, according to mccann.
https://bugzilla.gnome.org/show_bug.cgi?id=590563
- Add spacing after Frequent, reduce it for the other app categories.
Put a small gap (one line) between Frequent and the other
categories to make it clear that it is something a little
different.
- Remove category icons from the applications menu.
Remove category icons; they aren't particularly helpful
(they are gone from the GNOME-2.28 menus too) and having them
in Applications Browse draws the eye to the wrong thing - the
category - rather than the right thing - the application icons.
https://bugzilla.gnome.org/show_bug.cgi?id=596435
There are now 3 code paths in decreasing speed:
First, optimize subsearching more by just hiding the actors
that didn't match, since we know the ordering has to be right.
For initiating a search (or backspacing an existing one), again
instead of destroying and recreating actors, just temporarily
remove them and re-add them in the desired order.
Finally for when data has changed, use the old code path of
destroying all actors. (This itself could obviously be optimized
if we had a way to know that just one application changed, but
at the moment we don't).
https://bugzilla.gnome.org/show_bug.cgi?id=596119
First eliminate the variable WELL_ITEM_HSPACING since it was 0
and thus effectively was not used.
Add a new variable WELL_ITEM_MIN_HSPACING which is the minimum
space between grid items we allow. When computing layout, allow
for a number of columns less than 4 by using the minimum item
size.
https://bugzilla.gnome.org/show_bug.cgi?id=595023
Based on a patch from Colin Walters.
The menu is needed by the app switcher as well as the overview, so
make it slightly more generic and move the code to appIcon. Also add
support for drawing the menu either to the right of or below the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=590563
Refactor the current menu code to support both window selection
and "normal" menu items. Add a "New Window" item which does what
you'd expect.
Clean up the way we handle highlighting the window items to be
more direct; rather than looping over all items in most cases,
just directly manipulate one item
https://bugzilla.gnome.org/show_bug.cgi?id=594557
When we had a filtered set of windows, and want to exit the overview
into a particular window, what we do is re-show all the old windows
first, but don't reset the scaling on them. This will involve
some overlapping, but that's not a big deal because we'll immediately
get overlap anyways in the normal case zooming the windows back.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
When the user click+hold+release over the icon, the effect we want
is for the menu to stick around.
Also, allow the user to mouse over the actual windows and select
them directly. If the user mouses over a window, reflect that in
the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
Callers will generally expect _popup and _popdown to be a no-op if
the menu is already in that state; make it so.
Also change the 'popdown' signal to be 'cancelled'; this is
clearer and allows us to avoid having activate also call popdown.
https://bugzilla.gnome.org/show_bug.cgi?id=594699
When the user click+hold+release over the icon, the effect we want
is for the menu to stick around.
Also, allow the user to mouse over the actual windows and select
them directly. If the user mouses over a window, reflect that in
the menu.
Rather than starting lightboxing only when the mouse enters the
menu, start it when an application filter is set.
Also delete a stale function in WindowClone from previous work.
http://bugzilla.gnome.org/show_bug.cgi?id=594555
When we have multiple windows for an application, implement the following
behavior:
* On click + immediate release, go to the most recently used
* On click, hold for 0.6s, pop up a menu with windows, filtering
the window list to just those windows.
Mouse over on the window list highlights the moused-over window.
Implement this by splitting well item into InactiveWellItem
and RunningWellItem, sharing a base class BaseWellItem.
Rather than just launching if we weren't already running, always
relaunch, which happens to make Firefox, etc. work. See
the comment in the commit for more explanation.
We had multiple copies of the code to position a drag actor given a particular
source. Instead, just put it inside dnd.js.
Second, rather than test for GenericDisplay/WellDisplayItem etc.,
in various places, add a new method on each source "shellWorkspaceLaunch"
which both marks the item as being droppable on a workspace, and is
called by the workspaces code to launch the item.
Use MetaGroup for a window when looking up applications. If
we know the application for a TYPE_NORMAL window in the group,
use that.
However, we aren't always going to know the application for a window. In
that case, create a fake one.
ShellAppInfo has a "transient" flag so we know not to write these
fake apps to the usage file.
Clean up the idle focus handler to better handle the case where
no window is focused, and where we don't want to track the
particular window.
Update track_window to create the fake window.
When a window goes away, we want to delete the usage.
Rewrite shell_app_monitor_get_running_apps to be based
on the window_to_app hash, because that's what has the pointer
to ShellAppInfo*. Before we were looking up all ids through
ShellAppSystem, but that shouldn't be holding a ref to transients.
Change the well display icon to be centered, since our icons for
window apps aren't 48 pixels.
We don't have a lot of strings, and what ones we do have we've
been avoiding duplication. This patch adds calls to _() i.e. gettext
for those strings we do have.
Remove the last use of passing width into Dash by having the
Pane with the previews scaling dynamically and relying on
Clutter scaling.
If we only have one workspace, don't display a selection frame
for it.
Rework Dash into a searchArea and sectionArea, which get
explicitly sized by overlay.js. We use the workspaces size
to choose the size of those dash areas.
Switch dash colors/boxes etc. to ones from shell-black02.
Add a gradient to the panel.
Add a magnifier.svg for use in search.
Replace 'overlay' with the more descriptive name 'overview'
where the Activities Overview is meant. Call it Overview
(capitalized) in code comments.
The overlay-group and overlay-key provided by Mutter are not
affected, since they may be used for other components than
the Activities Overview.
Previously, ShellAppSystem only loaded (and cached) the set of
.desktop files from applications.menu and settings.menu, using
the gnome-menus library. The ShellAppInfo structure was
a "hidden typedef" for GMenuTreeEntry.
But we need to support loading an arbitrary .desktop file. Thus,
refactor the ShellAppInfo into a real struct, with a refcount,
and allow it to point to either a GMenuTreeEntry or a GKeyFile.
Also, in the case where we fail to lookup an icon for an
application, ensure we return a 0 opacity texture.
When WellGrid had no child it was doing a division by zero,
which screwed up the calculation for the height request and
having it ask for a negative number. This commit fixes this
by always requesting 0 in this case.
Use ShellGenericContainer to implement a fully dynamic layout
for the application well. It's still fixed to 4 columns by default,
but no longer requires a fixed width to be passed in on start.
With another chunk of work, it could likely try to adjust to
the case where we can only fit fewer than 4 items in the well.
Remove the border highlighting on mouseover, since that caused
reallocations, and the grid layout isn't trivial.
Delete the unused shell_global_get_word_with function.
It's easier to explicitly call Main.overlay.hide() instead
of chaining activation signals, this got lost in a mix between
the big dash rewrite and ongoing changes to the Application well.
This patch is a near-total rewrite of the Dash. First, the dash
code moves into a separate file, dash.js.
Inside dash.js, the components are more broken up into separate
classes; in particular there's now a Pane class and a MoreLink
class. Instead of each section of the dash, when activated,
attempting to close all N-1 other sections, instead there
is the concept of a single "active pane", and when e.g. activating
the More link for documents, if we know there's an active pane
which happens to be the apps, close it.
Many redundant containers were removed from the dash, and all
manual width, height and x/y offsets are entirely gone. We move
the visual apperance closer to the design by using the view-more.svg,
etc.
To complete the removal of height/width calculations from the dash,
we also had to do the same for GenericDisplay. Also clean up
the positioning inside overlay.js so calculation of children's
positioning is inside a single function that flows from screen.width
and screen.height, so in the future we can stop passing the width
into the Dash constructor and call this once and work on screen
resizing.
The previous application monitoring code was originally designed
to be based on WM_CLASS, which was then resolved on a server.
We have that resolution code locally now, so instead
of saving WM_CLASS data, save application IDs.
Also, inside the WM we have a much better
infrastructure for tracking windows. In particular, rather
than polling, we can just watch for focus notification on
the display, and window add/remove.
Instead of polling XScreensaver, use DBus to watch org.gnome.Session
which already has an idle time watch.
Now there is no polling at all inside the monitor.
