It turned out that getting properties and saving them to a variable
outside of loops instead of accessing them everytime inside the loop can
have significant impact on performance, so do that in Workspaces
vfunc_allocate().
Here the impact is not that large, about 0.05 ms with 20 open windows,
that still seems worth it though.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1743>
These checks aren't needed since Clutter should enforce this for us
already and skip the implicit transition when possible. This gets our
time spent in vfunc_allocate() down to 2.0 ms with 20 windows
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1743>
Setting four properties is more expensive than calling two C functions,
so move to set_origin()/set_size() calls for our ClutterActorBox
handling.
This gets us down to an average time of 2.1 ms spent in vfunc_allocate()
with 20 windows
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1743>
We can save a little bit of time in this loop by iterating directly
over the windowSlots array instead of iterating through children and
then performing a search for the windowSlot. This saves more time and we
only spend 2.2 ms instead of 2.3 ms in vfunc_allocate() now.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1743>
This layout manager is used quite often and the time we spend calling
it's allocate and get_preferred_width/heigth functions increases with
every open window.
We can save a lot of precious time during the layout cycle by moving
this layout manager from JS to C, thus avoiding the overhead of
trampolining between C and JS land.
In a measurement where the average time spent in vfunc_allocate() of the
Workspace actor was measured while opening an overview with 20 windows,
the average time spent went down from 3.1 ms to 2.3 ms.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1743>
Right now we always recreate the icon of the appMenu when calling
_sync(). This will relayout the panel everytime we open the overview,
because we call _sync() in that case.
We can easily avoid that by only recreating the icon actor in case the
app that's opened actually changes. This gets us close to doing no more
relayouts of the panel when opening the overview.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1733>
We already set the AppMenuButton to be non-reactive and transparent when
we hide it. Hiding it completely using clutter_actor_hide() will
additionally make it no longer affect layout and thus queue a relayout.
Since we hide the appMenu in the overview and we want to avoid
relayouting the panel when entering and leaving the overview, don't
completely hide the AppMenuButton to avoid queueing this relayout.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1733>
This updates the use of bind_cairo_surface_property for the changes
from d7cb2eeebc. Now this function returns a StImageContent and not
an Actor like the following code expects, so wrap it in a StIcon.
Also the function lost its size argument.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1718>
If the window wasn't in _windowSlots, the index is -1, so the last
element of the array is removed, leading to
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3547
I logged the stack trace from removeWindow() and it seems that when you
move the window from the second monitor to another workspace like shown
in https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3547,
removeWindow() is called twice for it, presumably once for the second
monitor workspace, and then once for the first monitor workspace for
some reason. It is during that call that _windowSlots doesn't contain
the window, so instead the last element (index -1) is removed, leading
to the animation bug.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1727>
We block state updates while the indicator for the active workspace
is animating. To track that, we check whether the scroll-adjustment's
value matches the active workspace index. That works as long as the
adjustment's value changes after the active workspace, but not when
switching workspaces via SwipeTracker which only changes the active
workspace after transitioning to the new scroll value.
To fix that, update the indicator on workspace changes as well.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1716>
Animating items of the iconGrid involves calling a few more C functions,
which is quite slow. Especially calling ClutterActor.set_easing_delay()
is slow because we override that function in JS to adjust for the
animation slow-down factor. So add a small class variable to make sure
we only animate the icons of the grid when we actually need it.
This makes the average time spent in vfunc_allocate() of the iconGrid go
down to about 0.7 ms.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1713>
It's quite slow to access class variables in JS, especially when they're
backed by GObject properties. To avoid accessing them in every iteration
when we're looping through the children of iconGrid, store those values
to another variable and reuse that inside the loop.
This shaves off another 0.2 ms from iconGrids vfunc_allocate(), getting
the average time spent in that function down from 1.3 ms to 1.1 ms.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1713>
Using a preexisting array to iterate over is much faster than iterating
over the actors children using a "for ... of" loop, that's because the
latter calls into C functions to get the next actor all the time.
Also, stop using array deconstruction here, it turned out that this is
extremely expensive. When profiling this part of the code, it turned out
that only 9% of the time spent in _getChildrenMaxSize() is spent calling
the get_preferred_height/width() methods. When not using array
deconstruction, this time increased to 22%, still not great, but a lot
better.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1713>
We need to access the visible children of a page in inside
vfunc_allocate(), and since getting those children is quite slow (it
involves iterating over all the children of the actor) let's avoid that
and cache the array instead.
This reduces average time spent in vfunc_allocate() of the iconGrid from
1.6 ms down to 1.4 ms.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1713>
We call this._getChildrenMaxSize() from the allocate() vfunc of
IconGridLayout. Since the function is quite expensive, it slows the
layout process down a lot, so instead of re-calculating it on every
relayout, cache the max size of children.
This makes the average time spent in vfunc_allocate() of the iconGrid go
down from 2.3 ms to 1.6 ms.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1713>
Instead of always aligning window previews vertically at the bottom of
their row, only do that if we have multiple rows. If there's only a
single row of windows, align every window vertically centered.
This is a very small step towards the new layout for window previews in
the overview, but since the release of 40 is getting nearer and nearer,
changing more is not feasible anymore.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3634
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1737>
To ensure the workspace thumbnails are vertically closer to the window
picker than to the search, scale down the wallpapers by a fixed number
of pixels. Using 24 px for this means we'll take of 12 px at the top and
12 px at the bottom of the wallpaper, that's a better strategy than
always scaling it by a fixed factor since it doesn't change with the
monitor size.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1702>
The back → transparent transition gives it a very bad look when
booting and running the startup animation.
Use the same transition duration hack to ensure that the panel
starts completely transparent.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1678>
There's this little hack that we do to match the panel transition from
transparent to black with leaving the overview via swipe down. The only
problem is that, while the duration of the panel transition itself is
matches, the corners don't, and they get out of sync.
This isn't very noticeable with the swipe gesture, but it'll be much
more prominent when booting straight into the overview.
Bind the 'style' property of the panel to the corners', so that the
transition duration hack applies to all of them.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1678>
The new startup animation consists of rising the Dash from the bottom,
falling the search entry from the ceiling, and going from HIDDEN to
WINDOW_PICKER with an opacity applied.
One little trick from IconGridLayout was added to ControlsManagerLayout,
which is a promises-based wait for allocation. This is required to make
sure that the transformed position of the search entry is valid, which
is only the case right after an allocation.
This animation also ensures that the overview is shown right on startup.
For session modes that do not have an overview, continue using the same
fade + scale animation.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1678>
We want to avoid updating the input region on startup, since it incurs
in roundtrips to the X server, but not workspaces struts, since they
affect the visible clip of wallpapers in the workspace. Since next
commits will make the overview be the after-boot screen, we really
don't want the wallpaper to be clipped wrongly.
Allow updating regions while starting up, but only workspace struts.
Make sure input is not updated by accounting for 'this._startingUp'
on 'wantsInputRegion'.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1678>
This is an X11-specific routine, and building the list of input region rects
on Wayland is a waste, since it incurs in many trampolines only to throw them
in the trash.
Don't build input region rects on Wayland. By modifying the 'wantsInputRegion'
variable, it also skips actors that only update input, which is another small
optimization for Wayland.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1678>
LayoutManager doesn't update struts when there's any modal running. Turns
out, the Overview itself is a modal. That, and the fact that the Overview
will be the startup state, prevents the workarea to be updated.
Allow updating struts when there's no other modal than the Overview.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1678>
Let the goToPage call afterwards to take precedence, instead
of resetting the adjustment (thus the view) on the side.
This resulted in strange state when the last page contains
a single icon, and it is dragged. The last page being emptied
triggers a pages-changed signal, which half resets the view
to the first page while DnD is ongoing.
Letting goToPage do its business means we neatly clamp to the
closest page to currentPage, the last page in that case.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1630>
When clicking on the page hints, the hint rectangles being visible
in place and not moving together with the page is a bit too
distracting.
Since the page hints are not part of the iconGrid hierarchy and
we have just 2 general ones for prev/next page (i.e. no page
associated), do this sliding via some smoke and mirrors: We don't
slide the page hints, but a parent container for both of them, and
we also control opacity so that the container is fully transparent
mid-page. At the point it is transparent, the container can be
snapped to the other side of the page, and faded back in as it
slides together with it, so it always looks like it goes away and
comes from the right sides.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1630>
Depending on the available horizontal space, we may want to manipulate
the icon grid and scroll view spacing to result in an optimal layout
that has space left to preview prev/next pages.
The main change here is that, when adapting to the available size, the
space given to a page does not necessarily match the available space,
as we need to be able to show more than one page at a time.
With this decoupling of available and page sizes in place, we now know
how much space there is available in order to extend the padding between
pages, or the fade effect applied to the previewed pages.
Underneath, we rely a bit less on hardcoded CSS paddings, and a bit more
on the StScrollView::content-padding property.
All put together, gives us proper space management from ultra-wide
displays, to display ratios that are close to the optimal grid ratio.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1630>
When DnDing an icon, we show both previous/next page, and optionally
a "placeholder" actor to allow creating new pages. These sides on the
scrollview are drop targets themselves, allowing to drop an app onto
the next/prev page without further navigation.
Still, preserve the checks to maybe switch to prev/next page without
finishing the DnD operation, for finer grained operations.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1630>
Add the necessary animations to slide in the icons in the previous/next
pages, also needing to 1) drop the viewport clipping, and 2) extend scrollview
fade effects to let see the pages in the navigated direction(s).
The animation is driven via 2 adjustments, one for each side, so they
can animate independently.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1630>
We want to show left/right side pages during navigation, also in
FolderViews. Let this scrollview use the same style than the "all
apps" one, and generalize the name a bit.
This will compress the scrollview horizontally, so there's actual
overflow space to show these pages.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1630>
Instead of taking just vertical/horizontal offsets, take a ClutterMargin
to allow us set the fade offsets on each direction specifically. Also,
handle negative values in margins, the fade effect will run in the negative
space left by the scrollview padding instead. Another difference now is
that areas outside the extents of the effect will be transparent, instead
of the effect ending abruptly past the given extents.
This will be used by the app grid, in order to selectively let see either
of next/prev pages while navigating.
While at it, fix code style issues in st_scroll_view_update_fade_effect(),
and clean up unused variables from the GLSL code.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1630>
The workspace minimap is much less prominent than the old workspace
switcher, and serves primarily as an indicator.
That means that duplicating it on secondary monitors (if workspaces
on non-primaries are enabled) is harder to mistake for per-monitor
workspaces, so make some people happy by including the minimap on
every monitor.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1735>
Now that the backgrounds was moved into workspaces, the fullscreen
views on secondary monitors are visually inconsistent with the
primary view, as there's no dash or search entry that reduces the
available height and allows adjacent workspaces to peek in.
Address this by adding padding above and below the view, so that
it is limited to 70% of the available height.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1735>
Right now the handling of external monitors is relatively simple, and
consists of putting either an extra workspace or a full view on the
monitor, depending on the workspaces-only-on-primary setting.
We are about to tweak the behavior on secondary monitors, prepare for
that by splitting out an intermediate actor that manages the views on
non-primaries.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1735>
At the moment views on non-primary monitors take up the entire work area,
so simply allocating the available size works. However we'll soon shrink
the views a bit to match the visuals on the primary monitor. As workspaces
keep the ratio, reducing their height will also reduce the width; override
the default allocate() to keep the extra workspace horizontally centered.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1735>
At the moment, we only get the initial :should-show value when populating
the thumbnails. That only happens when entering the overview, so any
listeners to notify::should-show will perceive it as a change rather
than an initialization, which can result in unwanted transitions.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1735>
We currently initialize the porthole to the screen size instead of
the monitor's work area we actually want. At the moment this doesn't
matter, as the minimap is created during initialization with the rest
of the overview, so we can expect a work area change that updates the
porthole to the correct values.
That won't be true for minimaps we put on secondary monitors, so make
sure we initialize the porthole to the actual values.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1735>
The minimap is currently created once when populating the overview,
and kept around until the end of the session. That will change when
we start to also show it on secondary monitors, so do proper clean
up when destroyed.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1735>
This is used to detect whether a click was short enough to select a
window and activate it or long enough to start a drag. Usually when
clicking on a window and selecting it, this leaves the overview, but
when clicking on a window on a neighboring workspace, the overview is
kept open, but selected is not unset in this case. So all attempts at
dragging the window after using it to switch workspaces will fail.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3783
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1717>
The property describes the target visibility (that is, the visibility
that will be set after the ongoing transition), and is therefore updated
at the start of the transition rather than from hideDone().
The overview gesture currently misses resetting it at the end, so it
is only updated to the correct state the next time the overview is
entered.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3798
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1726>
When adapting the check to the new versioning check, we just blindly
copied the old behavior for stable/unstable versions:
- stable releases must have matching major numbers
- unstable releases must match major and minor ("alpha", "beta", "rc")
That worked for the old even/odd scheme, but now has the absurd effect
that we consider an extension that lists "40.alpha" in its shell-version
incompatible with "40.beta", but compatible with "40.2".
At least this provides us with a good opportunity to reconsider the
behavior. While it is true that breakage is much more likely between
unstable releases, in practice extensions are either following shell
development closely or update once around the time of a stable release.
For the former, the stricter check isn't usually too useful (as the
extension releases around the same time as gnome-shell anyway).
For the latter, it's annoying that ".rc" is treated differently from
".0" and requires an update to become compatible.
The latter is also by far the more common case, so update the check
to only match on the major version regardless of whether a release
is stable or unstable.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3787
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1719>
Since commit 9980c80619, the porthole position is ignored. As a result,
previews are only shown if the primary monitor is located at (0, 0).
To fix this, we either need to propagate the porthole to every thumbnail,
use a custom layout manager that applies an offset to all children, or
add an intermediate actor that offsets the contents.
The last option is the simplest and doesn't require calls into JS on
every allocation, so pick that one.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3781
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1721>
The preview was getting scaled up by a factor based on what is needed to
increase the width by activeExtraSize pixels. With windows that are
wider than than they are tall, this means that the size of the window
will not increase any more than activeExtraSize in any direction, but
for windows that are taller than they are wide, the vertical scaling
can exceed this. This would break some of the assumptions in the
reported size for the preview chrome and could for very narrow windows
result in a rather large scale.
To fix this, calculate the scaling factor based on whatever is larger,
the height or the width.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1707>
Since commit 0f1b566918, we use gjs' automatic getters/setters for
the shader properties. Those handle the properties on the JS and
GObject side, but they don't update the corresponding uniform,
whoops.
Revert the lightbox bits of commit 0f1b566918 to get the effect back.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1712>
In the allocate() vfunc of WorkspaceLayout we use a small trick to make
the nonlinear animation paths when opening the overview less jarring:
Because a window might get smaller than its target size during the
animation, we make sure the size never drops below the final size
calculated by the layout strategy.
In the app grid the Workspace is very small though, and the size of a
window slot calculated by the layout strategy might actually be larger
than the workspaceBox. This means we might use the window slot size
instead of the workspaceBox size and end up with a window that's at the
correct position, but its size is too large.
Fix this by only applying this trick when we're animating towards or
from the state where we actually expect the workspaceBox to be larger
than the window slot, that is during the the transition from the session
to the window picker (or the other way round).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1698>
It should be allowed to set this._spacing to 0 and thus pass 0 as
rowSpacing or colSpacing to this._adjustSpacingAndPadding(). The current
if-condition there won't add the oversize to the spacing in case 0 is
passed though.
So change that if-condition and explicitely check for null instead.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1698>
Window previews can spill out of the container when their position in the
session overflows the monitor boundaries. In the past, Workspace didn't have
a visible background, and was (almost) always fullscreen, which would mask
this particular problem. However, nowadays, it is very much noticeable when
this situation happens.
Clip the window previews container to its allocation when the overview state
is bigger than WINDOW_PICKER. That is, between HIDDEN and WINDOW_PICKER states,
inclusive, no clipping is applied.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1691>
Instead of adding it to the window previews container, add it to Workspace
itself. This requires expanding WorkspaceBackground, so add the relevant
x and y expand flags.
Since the background is beneath the window previews, create and add it before
the window preview container.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1691>
Currently, Workspace is a single actor that contains both the background,
and all window previews, and is managed by WorkspaceLayout. In the future,
this concentrating aspect of it will bite us; we want the window previews
to be clipped to the allocation, but not the background, since it will
have shadows.
Make Workspace subclass St.Widget with a ClutterBinLayout as layout manager,
and move window previews to a child actor. To reduce the impact of this
extra actor, it's a ClutterActor instead of a StWidget, and the spacing is
still set on Workspace itself.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1691>
The WorkspaceBackground class has specific code to clip the background
to the workarea. However, it doesn't monitor for workarea changes, which
means it cannot react after being created.
Connect to 'workareas-changed', and update the workarea, the radius bounds,
and relayout when workareas change.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1691>
The primary workspace is displayed in the overview, and clipping it
ends up clipping the shadows too. Since Overview's ControlsManager
itself clips to allocation, no windows in the primary monitor spill
to other monitors. However, not clipping non-primary monitors might
end up in situations where their windows spill into the primary one.
Make sure to only clip workspace views of non-primary monitors.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1691>
The dialog is shown at session start, which right now means in the
regular session, however the plan is to start the session in the
overview. When that happens, the "Take the Tour" button should get
the user to the Tour without additonal actions.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1699>
Right now the rowSpacing and columSpacing of the layout strategy is
calculated by looking at the overlapping sizes of the close button and
the app icon of the WindowPreview, plus a constant spacing read from CSS
by the WorkspaceLayout that's added to that. We're not factoring in the
extra size of the scaled-up WindowPreviews here and instead depend on
the constant spacing being large enough. If we don't want to depend on
the spacing here, we should add the scaled-up extra size to the sizes
returned by chromeWidths() and chromeHeights().
Since the last commits all previews scale up by the same amount of
pixels, so we can now just add that size to the values returned by
chromeWidths() and chromeHeights().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1692>
Scaling differently sized WindowPreviews by a constant factor will
result in smaller windows getting enlarged by a smaller amount of pixels
than larger windows (1000*1.02=1020 but 100*1.02=102, one will grow by
20 pixels and the other one by 2), this can look a bit weird because
smaller windows don't scale up as much as larger windows.
So introduce a constant extra size to use when scaling windows up, we
set only the half size there because we want to ensure that the size
added on both sides is not fractional and we remain aligned to the pixel
grid.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1692>
Right now the spacing between icon and title works using a little trick
that doesn't really seem intended: The title is offset by
(icon-height * ICON_OVERLAP), when the icon is actually overlapping the
preview by ICON_OVERLAP, and *overflowing* the preview by
(1 - ICON_OVERLAP).
So correct that and offset the title by
(icon-height * (1 - ICON_OVERLAP)), and since now there's no spacing
anymore, add a proper ICON_TITLE_SPACING to that offset.
Also add the new ICON_TITLE_SPACING to the overlapHeight, where the
spacing was ignored so far.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1692>
The scale property tracks the relative size at which we display thumbnails
given the space we have available.
That assumes that the allocation represents that available space, but it will
actually be smaller while the minimap itself is collapsing.
Luckily we have an easy option to avoid a distorted scale: Just don't update
it while collapsing. We expect scale changes when adding or removing thumbnails,
but as we freeze those during transitions, we can do the same with the scale.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3739
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1696>
Right now the minimap only hides itself in case of a single static
workspace. That's not only an edge case, but also not expected to
change while the overview is visible, so changing the visibility
without a transition is fine.
However that is about to change, and we'll hide the minimap as well
when there are fewer than three workspaces. As that condition is
very much expected to change from within the overview, the transition
should be animated.
Implement that via a new :collapse-fraction property on ThumbnailsBox,
and use that to transition both the height of the box itself and the
scale of the individual thumbnails.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3739
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1696>
We currently have two components that show or hide the minimap:
- the thumbnails hide themselves in case of a single static workspace
- overview controls show the minimap when no search is active
That obviously doesn't work correctly.
To fix this, change thumbnails to set a new :should-show property instead
of the visibility, and let the overview controls take it into account
when changing the visibility.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3739
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1696>
As planned and shown in the mockups for GNOME 40, round the corners of
the background wallpaper of workspaces.
To do that we use the new rounded-clipping support of
MetaBackgroundContent and we animate the radius by attaching it to the
stateAdjustment just like everything else.
Because we show only a part of the wallpaper and "cut away" the area of
the panel in WorkspaceBackgrounds vfunc_allocate(), we also need to set
the rounded clips bounding rect to the rectangle we're actually showing,
otherwise the texture would be rounded in the region that's cut away.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1651>
This is the same as the vertical swipe gesture, but for keyboard
junkies: Analoguous to the <super><alt>left/right shortcuts for
switching between workspaces, add <super><alt>up/down to shift
between session, window picker and app grid.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1695>
The animation handling is kinda split between layout (for the
keyboard slide), and keyboard (for the focus window slide). It
would be nice to have more fine grained control on those, so
move the animation handling altogether to keyboard.js as a start.
This is roughly similar, except that transformations apply to
the Keyboard actor, instead of the keyboardBox (its parent). We
now queue a relayout after the animation in order to update the
chrome tracking.
The only layering break now is that we emit
layoutManager::keyboard-visible-changed in keyboard.js, its
purpose will be dropped in future commits, so leave it there for
now.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1668>
Gestures leaving the overview from a short distance result in an
ugly effect with the panel opacity transitionhaving a fixed duration.
Make this transition have the same duration (although in a hackish
way) so we avoid the ugly effect.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
The gesture internally manipulates the main adjustment so one swipe
up brings up the overview, and a second swipe up brings the app
grid. The gesture also works in the other direction to get out of
the overview.
Internally, this is delegated on the OverviewControls, so the
adjustment is not leaked out of there. This however meant open
coding the gesture interaction so it can be directed from
overview.js code.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
This will be set whenever an event controller is manipulating the adjustment.
It should enter the same transitional state it does for animations. This
will be used by the overview gesture.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
Separate this logic from _switchWorkspaceBegin() and ensure it is set
before this call. The SwipeTracker code uses the orientation to determine
whether the gesture should begin at all, so changing the orientation on
gesture begin was a bit too late.
But also, that meant the SwipeTracker was left at the default orientation,
which was vertical (unlike workspaces, and like the overview gesture).
This made both swipe trackers try to handle the same swipe, with the
WorkspacesView being doubly unfortunate (for triggering in the first place,
and for happening after the other gesture did queue relayouts on it).
Taking this logic outside of _switchWorkspaceBegin() and having the right
orientation beforehand results in both gestures looking for their direction,
and not meddle with each other.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
We now have multiple touch swipe gestures with matching fingers and
different directions set on the overview hierarchy. Accepting all
touch swipes without checking the direction makes one of these gestures
take control of input, without other gestures having a say on this.
So, look for the direction of the touch events and look if it matches
the expected orientation before accepting the gesture.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
Make the touchpad gesture keep track of its state, and enter in a
rejected state if the swipe is happening in the wrong direction.
Effectively, this means touchpad gestures are locked on a single
direction, and horizontal+vertical swipeTrackers won't be handling
events at the same time.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
We now have multiple touch swipe gestures with matching fingers and
different directions set on the overview hierarchy. Accepting all
touchpad swipes without checking the direction makes one of these gestures
take control of input, without other gestures having a say on this.
So, look for the direction of the swipe events and look if it matches
the expected orientation.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
Some actors don't have the scale applied to them directly but are
children of a scaled parent. In those case just retaining the scale will
not be enough and the scale of the actor itself needs to be adjusted
when reparenting. This could for example be seen when dragging windows
from the workspace thumbnails.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1687>
Even if activePage has been removed as part of commit 27627bd40, we've
still a reference of it in key press handler.
Given that there's no anymore an active page to redirect input to,
remove these references, so that can be handled in the proper view to
implement key-navigation.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1688>
When opening a large number of windows, the computed space and scale for
a layout can become negative due to the per-row/per-column spacing. This
is smaller than the initial values of lastSpace and lastSpace, leading
to a null return which then causes all sorts of other issues resulting
in the workspace becoming invisible.
This change ensures that the function always returns a layout, even if
it may look a bit broken and does not conform to the scale/space
requirements which are impossible to fulfill for the given number of
windows. It's better than displaying nothing, since it allows users to
move/close windows and restore this to a more usable state.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3730
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1685>
When we got an error, all the other HINT or INFO messages are not useful
anymore and delaying to show them is just a waste of time and may be
even wrong in scenarios with fast authentication devices.
An example are the fingerprint devices, where the user may touch the
sensor repeatedly while we may still show the "touch the sensor" hint
instead of notifying of possible errors.
So, in case we got an error override all the other errors coming from
the same service with lower priority.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
Once the verification has been stopped or has failed all the messages
that are not of error type are just not needed or wrong to show.
For example, in the fingerprint case we may still show the hint to swipe
or touch the device, while the fingerprint PAM service has already been
stopped.
So filter them by adding a new function that adds a null message to the
queue, overriding all the messages that have a lower priority.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
There are cases in which a service may want to override a message with
one coming with higher priority, for example an info or hint message
isn't useful anymore if we've already got an error message.
In the same way when a service has been stopped we don't care anymore
showing its info or hint messages, while it still may be relevant to show
errors.
An example is the fingerprint service that may emit errors quickly while
the hints messages should not be kept around when an error is already
queued or when the service has been stopped.
So, add function that allows to override queued messages based by their
type that follows this policy:
- Messages coming from different services are always preserved in
their original order.
- Messages (from the same service) with a priority equal or higher than
the last queued one are preserved.
- Messages matching completely the last queued are dropped in favor of
this one.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
It can be convenient to get the currently showing message in order to
replace or remove it in case it's not needed anymore.
So simplify the message queue handling by only depending on a single
local variable (_messageQueue) and redefining hasPendingMessages
depending on its content.
Now messages are kept in queue till they are not fully processed and the
first message is always the one currently shown.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
When a fingerprint failure event happens we may also soon receive a
conversation-stopped event with an error message (such as in the case
we hit the MAXRETRIES value), but this is going to be ignored in case we
are too quick in consider the first failure a verification-failed event
because that implies disconnecting from all the events and then ignoring
such signals.
To prevent this, add a small timeout before failing the verification so
that if we get a further event we will process it.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
In the case a service is not available (as it can be in the fingereprint
case when a supported reader is available but has not enrolled prints)
we were trying indefinitely to restart it, however this can lead to
troubles since commit 7a2e629b as when the service conversation was
stopped we had no way to figure out this case and we'd end up to
eventually fail the whole authentication.
However, in such cases the PAM services are expected to return a
PAM_AUTHINFO_UNAVAIL and gdm to handle it, emitting service-unavailable
signal.
So connect to ::service-unavailable and keep track of the unavailable
services so that we can avoid retrying with them.
In case such service is not the foreground one, we can just silently
ignore the error as we did before commit 7a2e629b, without bothering
failing the whole verification.
In case we got a valid error message on service-unavailable, we also
show it, this is normally not happening unless GDM isn't redirecting
here other kind of problems (such as MAXTRIES) which are supposed to
stop the authentication stopping any further retry.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3734
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
When creating an icon for the system actions search provider, set the
icon size using StIcons own icon-size property instead of ClutterActors
width and height property. That ensures the scale factor is applied and
the icon will be properly scaled on hiDPI screens.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1686>
The icon and close button might be overlapping the window actor but
were not considered in has_overlaps() which gets used to decide whether
to offscreen the actor for transparency. Since currently the icon is
visible when the preview is dragged and the whole actor is turned
transparent, the opacity will not be applied to everything as a whole
but the child actors individually. This leads to the window becoming
visible behind the icon.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1684>
Calling startTouchGesture() on the workspacesViews can change the
visibility of the workspaces if not all of them are already shown, such
as when there are more than 3 workspaces or for 3 workspaces if we are
not on the central one. This invalidates the allocation and the width
used as distance for the gesture would become 0, resulting in drag
gestures immediately jumping to the first or last workspace due to a
division by 0.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3721
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1682>
Currently when the foreground service conversation stops we increase the
verification failed count and try to start it again, while if a
background service has been stopped we just ignore it.
This is causing a various number of issues, for example in the case of
the fingerprint authentication service, it is normally configured to die
after a timeout, and we end up never restarting it (while the UI still
keeps showing to the user the message about swipe/touch the device).
So, in such case let's just consider it a "soft" verification failure
that doesn't increase the failures count but will cause us to reset the
UI and try to restart the authentication (and so the affected service).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
Wiggle may make the error message to be visible for less time so provide
the auth prompt an API to increase the timeout to be used for showing a
message in some cases.
This could be reworked when we'll have a proper asyn wiggle function so
that we could just make the user verifier to "freeze", then await for
the wiggle transition to complete and eventually release the verifier.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
Currently whenever an authentication failure happens we wiggle the
entry, however this may not be related to the service which failed.
For example if the fingerprint authentication failed for whatever reason,
there's no point to wiggle the text input as it's something unrelated to it.
So, only apply the wiggle effect to the entry in case the failure is
coming from the querying service.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
By giving to the AuthPrompt information regarding the source service
name (and so the ability to know whether it's a foreground service) can
give it the ability to behave differently.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
Fingerprint PAM module can have multiple failures during a runtime
and we rely on the pam module configuration for the maximum allowed
retries.
However, while that setting should be always followed, we should never
ignore the login-screen's allowed-failures setting that can provide
a lower value.
So, once we have a fingerprint failure let's count it to increase our
internal fail counter, and when we've reached the limit we can emit a
verification-failed signal to our clients.
As per this we need also to ignore any further 'info' messages that we
could receive from the fingerprint service, as it may be configured to
handle more retries than us and they might arrive before we have
cancelled the verification session.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
Decouple the verification failure count increase from
_verificationFailed as there are some cases in which we may want to
increase it without emitting a verification-failed signal.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
When the login/lock screen is shown the error messages for background
services are always ignored.
However, in case the service is the fingerprint authentication method
we still want to be able to show error messages to inform the user
about what failed, and eventually that the max retries (that may be
different from the login screen configuration) has been reached.
This handles partially the design issue [1] related to the login/lock
screen fingerprint authentication.
Eventually we want to use pam extensions to use clearer and parse-able
messages, however in the case of the fingerprint service we can be sure
that the fprint PAM module will only send errors on auth failures.
[1] https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/56
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
Checking whether the item is empty is now the history’s job, per the
previous two commits. The history also trims the input for us.
The effect of this is that we call _history.addItem(), and thereby move
to the end of the history, even if the input is empty (or consists only
of whitespace); clearing the input field and pressing Enter becomes a
quick way to jump back to the end of the history. (The current history
item is not overwritten if the input is empty.)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1653>
This ports the runDialog changes of [1] to the underlying history
component, where they can benefit looking glass as well: the history is
now responsible for trimming the input and deciding that it shouldn’t be
stored if empty. (Note that _setPrevItem and _setNextItem already
skipped updating the history if the entry was empty.)
Since both users, runDialog and lookingGlass, also need the trimmed
input for other reasons – runDialog to avoid issues when interpreting
the command as a file path (if it can’t be executed as a command),
lookingGlass to decide whether a command should be run at all – have
addItem return the trimmed input. (runDialog and lookingGlass are not
yet changed to take advantage of this – that will be done in separate
commits.)
[1]: https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1442
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1653>
When verification failed using a specific authentication service we're
currently restarting the whole user authentication system, which leads
to lots of unneeded operations (reinitializing a new user verifier proxy,
restarting all the gdm workers with the relative PAM modules and so on).
And this makes also debugging of login problems more complicated, given
we're cluttering the journal with repeated data.
However, at reauthentication failure GDM has already set up for us an
user verifier that we can use reuse to start only the service that had a
failure. So when possible, just start a new service instead of rebooting
the whole authorization process.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
When retrying the authentication we should make sure that all the
previously initiated services are stopped in order to begin a new
authentication session with all the configured services.
Unfortunately at the current state we only dispose the currently used
user verifier, but we don't make it to stop all the relative gdm workers
and then they'll stay around potentially blocking any further usage of
them (as it happens with the fingerprint one, that has unique access to
the device).
So, cancel the currently running authentication before starting a new
one if we're explicitly retrying.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
In case a background service such as the fingerprint authentication
fails to start we'd just mark the whole authentication process as
failed.
Currently this may happen by just putting a wrong password when an user
has some fingerprints enrolled, the fingerprint gdm authentication
worker may take some time to restart leading to a failure and this is
currently also making the password authentication to fail:
JS ERROR: Failed to start gdm-fingerprint for u: Gio.DBusError:
GDBus.Error:org.freedesktop.DBus.Error.Spawn.Failed:
Could not create authentication helper process
_promisify/proto[asyncFunc]/</<@resource:///org/gnome/gjs/modules/core/overrides/Gio.js:435:45
### Promise created here: ###
_startService@resource:///org/gnome/shell/gdm/util.js:470:42
_beginVerification@resource:///org/gnome/shell/gdm/util.js:495:18
_getUserVerifier@resource:///org/gnome/shell/gdm/util.js:405:14
async*_openReauthenticationChannel@resource:///org/gnome/shell/gdm/util.js:378:22
async*begin@resource:///org/gnome/shell/gdm/util.js:194:18
_retry@resource:///org/gnome/shell/gdm/util.js:561:14
_verificationFailed/signalId<@resource:///org/gnome/shell/gdm/util.js:584:30
_emit@resource:///org/gnome/gjs/modules/core/_signals.js:133:47
finishMessageQueue@resource:///org/gnome/shell/gdm/util.js:268:14
_queueMessageTimeout@resource:///org/gnome/shell/gdm/util.js:273:18
_queueMessageTimeout/this._messageQueueTimeoutId<@resource:///org/gnome/shell/gdm/util.js:288:65
Given that background services are ignored even for queries or any kind
of message, we should not fail the authentication request unless the
default service fails.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
When a verification session has failed we may want to wait for the user
to have completed all the waiting queries and to have read all the
incoming messages, however during such time an user verifier should
not be allowed to queue further messages to the UI, as we're about to
completely stop the identification or start a new one.
Unfortunately this is not true because we're still connected to the
identifier signals, and so we may still show messages.
This is particularly true when using the fingerprint PAM module as it
may restart the authentication while we're in the process of stopping
it.
So, keep track of all the signals we've connected to, and disconnect on
verification failed and during cancel/clear operations.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
Answering a query may be delayed to the moment in which we've not any
more messages in the queue, however this case can also happen just after
we've cleared the UserVerifier and in such case we'd have nothing to
answer, but we currently throw an error:
JS ERROR: Exception in callback for signal: no-more-messages:
TypeError: this._userVerifier is null
answerQuery/signalId<@resource:///org/gnome/shell/gdm/util.js:249:17
_emit@resource:///org/gnome/gjs/modules/core/_signals.js:133:47
finishMessageQueue@resource:///org/gnome/shell/gdm/util.js:266:14
_clearMessageQueue@resource:///org/gnome/shell/gdm/util.js:301:14
clear@resource:///org/gnome/shell/gdm/util.js:223:14
cancel@resource:///org/gnome/shell/gdm/util.js:205:18
reset@resource:///org/gnome/shell/gdm/authPrompt.js:482:32
cancel@resource:///org/gnome/shell/gdm/authPrompt.js:569:14
vfunc_key_press_event@resource:///org/gnome/shell/gdm/authPrompt.js:128
So handle this case more gracefully keeping track of the current
cancellable and checking whether it is still valid before trying to answer
a query or do a delayed action.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
As per previous commit the user can cancel an ongoing authentication via
Escape key and that will always send the user back to the clock view in
lockscreen or user-selection view in login prompt.
However, we can be a little more permissive and don't switch view to be
able to restart the authentication without further action.
To avoid this to be abused though, we consider the user verification
cancellation via escape key to be a "soft-failure", so once the
configured "allowed-failures" gsettings value has been reached, we'd
just act as before, ignoring any further request (until we don't get
back to the user auth view).
In this way we still make brute-force attacks harder to do, while still
giving the well-behaving user some ability to fix mistakes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
Escape key is supposed to cancel a verification, however if the user
already hit Enter to begin the authentication the Escape key won't work
until the verification completed.
This may be quite inconvenient when an user did a typo while writing and
wants to cancel the already started auth.
So, while authenticating (or in general while the entry is unsensitive)
give the key focus to the authpromt itself so that we can still get the
input events and cancel an user action.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
When a cancel event in the user lockscreen happens we first emit a reset
signal and immediately a cancelled one.
This lead to start a new gdm worker for each enabled authentication
method and then immediately to stop it.
As per the previous commit, we don't have anymore dangling gdm workers
around, but still we should not even start a new one in such case.
So, when the user explicitly cancelled the authentication session, first
emit a cancelled event and only emit a reset event with a begin request
if we are outside the lockscreen.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
When we cancel an user authentication via Escape key or cancel button on
AuthPrompt we reset the view and we emit a 'cancelled' signal that leads
to destroying the auth prompt and the user verifier.
However, the verifier may still have an operation in progress and its
completion may take some time (as in the case of gdm-fingerprint), but
we just leave the gdm worker running until its pam module completes
(potentially never) clearing and disposing its handle.
So, instead of just clearing the verify, actually cancel and clear it.
In case the user verifier is set, clearing the relevant data will happen
anyway as part of the cancel() call.
Ideally this would have been handled by gdm itself, but unfortunately we
can't fix it there because the verifier itself is a class generated by
gdbus-codegen, so we can't handle this automatically on disposal nor we
can automatically monitor when the caller proxy is stopped on our side.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3654
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1622>
Scaling the icons all the way from/to 0 is a relatively big transition,
which is fairly distracting when playing simultaneously for multiple
previews after reaching the WINDOW_PICKER state.
Instead, tie the scale to the overview state itself, so that the animations
runs in parallel.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1654>
Back when the Dash was vertical, the size of each item was calculated
solely based on the available height. After making the Dash horizontal,
this was swapped by the available width. However, when the height of the
Dash decreases, the current code results in never scaling them up ever
again.
Fix that by making ControlsManagerLayout explicitly pass the maximum Dash
sizes. Remove the 'notify::width' handler that served the same purpose.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3651
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1638>
Remove the dummy applications page that was introduced as a temporary
step. Replace the 'page-changed' and 'page-empty' signals with a 'search-active'
boolean property.
Remove ViewSelector.ViewsPage since it's now unused, and all the page handling
mechanism. At last, since we don't use any ShellStack features anymore, simply
make it a St.Widget with a ClutterBinLayout as the layout manager.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1667>
Add a "screenshot-taken" signal from the screenshot service's internal C
implementation, and use that to trigger the camera flash visual effect
and the click sound, allowing them to run in parallel with the PNG
compression instead of waiting until the file is complete to start.
This significantly improves perceived latency on high res setups such as
4K, 5K, or dual 4K screens.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/512
Co-authored-by: Brion Vibber <bvibber@wikimedia.org>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1658>
On my local jhbuild setup some local stuff is not set up and
there's no pictures folder. This fixes a regression where it
blew up instead of saving to the home dir in this situation.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1658>
In addition to disabling the overlay when the state is not 1,
disable it also when not in the active workspace.
Make the Workspace class track the workspace's active state,
and resync the overlays when it changes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1645>
The behavior of workspaces is different depending on whether
the overview is in window picker state, or app grid state.
When in window picker state, clicking on adjacent workspaces
should only activate them, without hiding the overview; and
clicking on the active workspace hides the overview. When in
app grid state, clicking on a workspace must always hide the
overview.
Pass the overview adjustment to Workspace, and leave overview
if the overview state is bigger than WINDOW_PICKER.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1645>
The overview transition consists of getting the initial and final
states of the overview adjustment, derivating various other internal
states from them (such as the fit mode, opacities, translations, etc),
and finally interpolating the allocation boxes.
When interpolating between the fit mode, WorkspacesView uses the current
allocation box to derivate the SINGLE and ALL fit mode boxes. However,
that creates a curved path during overview transitions. What we really
want to do here is calculate the fit mode box relative to the corresponding
overview state. For example:
+----------------+----------+------------------------+
| Overview State | Fit Mode | Workspaces geometry |
+----------------+----------+------------------------+
| HIDDEN | SINGLE | Cover entire screen |
| WINDOW PICKER | SINGLE | Between minimap & Dash |
| APP GRID | ALL | 15% screen height |
+----------------+----------+------------------------+
Using the table above as the reference, when the overview transitions
between WINDOW PICKER and APP GRID, we must interpolate between
(SINGLE fit mode @ between minimap & Dash) and (ALL fit mode @ 15% screen
height). That way, we always interpolate the final boxes, which corrects
the odd path that workspaces follow during this transition.
Make the WorkspacesView of the primary monitor use these cached boxes
when the overview is in the middle of a transition, and the fit modes of
the initial and final state differ, to calculate the workspaces positions.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
It makes more sense in a spatial overview that the app grid
comes and goes to somewhere in the screen, instead of fading
in and out into the void.
Make the app grid rise from the bottom of the screen.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Move AppDisplay, WorkspacesDisplay, and ThumbnailsBox from ViewSelector to
ControlsManager. This allows to always allocate the correct size for AppDisplay,
and will enable for a plethora of further improvements. The end goal is to
completely remove ViewSelector, and let ControlsManager handle the layout of
everything that's visible in the overview.
For now, replace the apps page with a dummy actor in ViewSelector.
Adjust various callers around the codebase to not access the ViewSelector
directly from the overview anymore.
Bind the opacity of the primary workspace to WorkspaceDisplay's opacity. This
allows removing the parent opacity hack in place, which will be done by the
next commit.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Now that Overview is able to ease into any state, be it window
picker or app grid, we can move this ViewSelector method to
Overview itself, which is its rightful place to live.
Remove ViewSelector.showApps(), and make all callers call
Main.overview.show(ControlsState.APP_GRID). Also make sure the
show apps button is correctly toggled.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Next commits will requires ControlsManager to animate to different
states, depending on how Overview is called. Add a new 'state'
parameter to ControlsManager's, and OverviewActor's animateToOverview,
and Overview.show().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Remove Workspace.zoomTo/FromOverview(), they're unused now. Rename
everything up to ControlsManager to prepareToEnter/LeaveOverview(),
since these classes don't run the animation anymore.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
WorkspacesView uses the floating layout when the overview is in window
picker mode, and the session layout when the overview is in app grid
mode. Up until now, the fit mode adjustment was used to derive the
workspace mode, but it is incomplete as it doesn't have the full range
of workspace states.
Make ViewSelector cascade the overview adjustment to WorkspacesDisplay,
and use the overview adjustment itself to derive the workspace mode.
Extra workspaces don't have to account for the fit mode, and thus are
basically a clamp(state, 0, 1) of the overview state. However, don't
call animateTo/FromOverview() anymore, since they ease the workspace
mode adjustment.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Boy, does this commit feel good.
While the workspaces view on the primary monitor *appears* as part of
the overall overview hierarchy, this hasn't actually been the case
until now. We synchronized its size and (stage) position to match
the workspaces display, but actually kept in a separate layer for
the transitions to and from the overview.
But now that the new layout manager slides out completely during the
overview transitions, the workspaces display starts out covering the
entire work area, which is exactly what we need for the transition.
So finally stop faking it, and actually make the primary workspaces
view a child of the workspaces display.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Instead of delegating it to ViewSelector, make the transition to and from
overview ease the main state adjustment.
This commit temporarily breaks these animations, but on the other hand
introduces an important feature: ViewSelector is always allocated to the
actual size. This will finally allow for adding WorkspacesView as a child
of WorkspacesDisplay, and finally remove the actual geometry hack, which
is what next commit is about.
This commit also effectively reverts b64103efc.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Instead of directly accessing ViewSelector and calling these methods
there, cascade the calls to OverviewActor, ControlsManager, and finally
ViewSelector. Also move the opacity transition to OverviewActor.
This commit has no functional change.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Currently, ActivitiesContainer reacts to showAppsButton and
transitions between app grid and window picking states on
its own. In the future, we want full control over this.
ControlsManager already has a state adjustment that represents
all possible overview states. Propagate this adjustment up to
ActivitiesContainer, and use it to drive the transition.
This requires moving the callback to the showAppsButton to
ControlsManager, since now it control the state adjustment
itself, not ActivitiesContainer's adjustment.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
In the future, we want to tightly control the state of the
layout throught gestures, which requires hooking everything
together with adjustments. This is the first step in this
direction.
Add a new custom layout manager for ControlsManager that
allocates the search entry, the view selector, and the Dash,
vertically.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1624>
Currently, gnome-shell uses the wrong scrolling direction for
horizontal scrolling events.
When dx < 0 for a smooth scroll event, then the scrolling direction is
supposed to be Clutter.ScrollDirection.LEFT, instead of
Clutter.ScrollDirection.RIGHT, as dx is smaller than 0.
Fix this issue by swapping the values LEFT and RIGHT.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1665>
It is possible for an initiated session to complete without
a request if polkit can authenticate the action without user
input. We fail to clean up after ourselves in that case, as
the cleanup is done after the dialog is closed.
The dialog can still be shown when the code that hides existing
dialogs while the screen is locked shows it on unlock. But as
the session was closed, the dialog is now defunct and cannot
be dismissed by the user.
Fix this by running the cleanup on close() when the dialog
wasn't shown.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3701
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1662>
The children variable holds the icons that were originally in
the dash. For the separator visibility, we should consider the
icons that are in the dash after the update, so we must consider
additions as well as removals.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1659>
Previously we used a bunch of heuristics for this. We checked if velocity
was directed towards the nearest snap point and its value was larger than
a threshold. If it is, we completed the swipe, otherwise we cancelled it.
This was good enough at the time, because this code was originally written
for back/forward swipe. Since then, the swipe tracker was extended to
handle arbitrary snap points and not just 0 and 1, or -1 and 0, depending
on text direction. After that it was iterated on, but never significantly
redone.
This worked well enough, but had two problems:
1. In some cases, notably overview, it may be wanted to be able to swipe
through multiple pages at once. This wasn't really possible because we
always picked the adjacent snap point.
2. Since we can't do that well, we want to restrict swipes to one page at a
time. It was done in a rather hacky way by clamping the position into
[-1, 1] range from the place where we started the swipe. This works
if we start the swipe from idle position, but if an animation was
already going, the range would be clamped to arbitrary values, and very
likely containing only one snap point, which we already swiped past at
this point. In this case, finishing the swipe would cancel it regardless
of velocity. This means that if one tries to quickly move through
carousel pages via swiping, half of the swipes will be inexplicably
cancelled.
We'll use the deceleration formula from
https://medium.com/@esskeetit/how-uiscrollview-works-e418adc47060#10ce
to calculate then projection point, then pick the nearest snap point and
calculate the duration as we did before. It works well enough for short
distances, but has two problems:
1. It caps the maximum distance at a pretty low value - about 5 pages in my
testing.
2. With how we pick the nearest snap point, it's too easy to accidentally
cancel the swipe,
To combat the first problem, we can modify the curve: only use linear
function at small distances, and smoothly transition it to a parabola
further.
For the second problem we can add two special cases: first, if the swipe
ended up between the initial snap point and the next one, we always prefer
the latter. Second, a good old velocity threshold for cancelling.
We'll also use a slightly smaller deceleration value for touchpad: 0.997
instead of 0.998.
Now that we can pick any snap point, the [-1, 1] clamping doesn't make
sense anymore, so instead let's replace it with a more flexible
mechanism: if we're near a snap point, pick its adjacent snap points.
Otherwise, take the two nearest snap points, and take their adjacent
snap points. This way we have 3 snap points to choose from when
starting a swipe from an idle position, and 4 if we start during an
ongoing transition.
This way, if we've just swiped from snap point n to n+1, the transition
will pick snap points n-1, n, n+1, n+2 and if we swipe again, we will
likely land on n+2. During that transition, if we swipe again, it will
likely have already passed the snap point n+1, so this time the available
snap points will be n, n+1, n+2, n+3, so we can swipe again and it will
still complete, and so on.
This will make it easy to allow multi-page swipes as well, by just
removing the clamping.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1647>
In some cases we may get anevent with very low delta at the end of the
swipe. While we can't completely ignore them, we can smooth them using a
scroll history, similarly to what GTK kinetic scrolling does: keep track
of the last 150ms of events, and sum their deltas when calculating the
velocity.
The logic is based on what GTK does in GtkGestureSwipe and
GtkEventControllerScroll.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1647>
The reason this wasn't using the Gio.DBus.makeProxyWrapper() convenience API is that it passes custom flags to the proxy, and that wasn't supported by the wrapper at the time.
As this is now possible, this commit migrates us to the new API.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1572>
Let empty input result in an error, just like other invalid commands
(bad syntax, nonempty whitespace, etc.). GLib already has an error
message “Text was empty (or contained only whitespace)” which it shows
for whitespace-only input, so letting that message apply also to empty
input makes sense.
This requires some tweaks further down the file to avoid interpreting
empty input as an empty path (relative to the home directory) and then
opening the home directory.
Part of https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3183.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1442>
Resource icons are added to the fallback icon theme, so they won't
get used if a matching icon is found in the configured theme.
That includes fallback names, so Adwaita's "window-close-symbolic"
takes precedence over "window-close-24-symbolic" in hicolor.
Fix this by using a custom name for a custom icon.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1640>
The Message class this is derived from unconditionally adds a close
button with 0 opacity that only gets shown on hover for messages that
can actually be closed. The MPRIS MediaMessage however can never be
closed and having a close button can cause the title to be cut short
unexpectedly.
Similarly the secondary text which other notifications use to display
the notification time is always left empty here as well.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3664
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1632>
grabHelper is passing a boolean argument to onUngrab() callback function
and since commit 1acbdcc9b3 we'd end up adding it to to the callback list or
we'd try to invoke it:
(gnome-shell:3490851): Gjs-CRITICAL **: 17:19:20.460: JS ERROR:
TypeError: func is not a function
onComplete/<@/media/M2/GNOME/gnome-shell/js/ui/appDisplay.js:2407:56
onComplete@/media/M2/GNOME/gnome-shell/js/ui/appDisplay.js:2407:40
_makeEaseCallback/<@/media/M2/GNOME/gnome-shell/js/ui/environment.js:85:13
_easeActor/<@/media/M2/GNOME/gnome-shell/js/ui/environment.js:170:64
Use an arrow function so that we can control the parameters we pass
to popdown.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1635>
This get's rid of the single-indicator introduced in one of the latest
commits. This was causing the accessibility pill in the top panel
to have different padding from the keyboard layout pill.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1615>
So far, we couldn't allow workspace scrolling outside the overview
because scroll events were always sent to clients. However mutter
was changed recently to pass on scroll events when the mouse button
modifier (usually super) is pressed, which allows us to enable the
same workspace scrolling as in the overview now.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1612>
The design now calls for super-scroll for workspace switching
in the session, however it is currently only possible for
SwipeTracker to either handle scroll events or not.
In order to support the new use case, add a new :scroll-modifiers
property that allows specifying modifiers for which scroll events
are handled.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1612>
The code to update the actor position based on the cursor and current
scale was run in a 'new-frame' handler. This is working fine when
animations are enabled, but when they are turned off this does not work.
This is because the 'new-frame' signal is emitted before the changes for
that frame are applied. So with animations off the position was only
ever updated with the starting values. As a result the shrunk actor was
not being dragged by the position where it was clicked, but by where it
was clicked in the original size, which is likely not even on the shrunk
actor.
This change now also updates the position in the onComplete handler
which gets run with the final scale, even if the duration is 0.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/1699
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1627>
Next commit will bind the workspace state adjustment to the snap
adjustment in WorkspacesView, and we'll need the preparation
steps but not the easing of the state adjustment.
Split preparation steps from zoomFromOverview() into a new method
prepareToLeaveOverview().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
As per the latest mockups, then horizontally snapping, the active
workspace should be highlighted. Because WorkspacesView clips to
allocation, we cannot simply scale up the active one. Instead,
scale down the inactive ones.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
Synchronizing the actual geometry while animating from / to the overview can
break the animation. Let's prevent that. This code will go away soon anyway,
but to not lose bisectability, it's better not to leave it misbehaving until
then.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
When vertically snapping, WorkspacesView currently allocates workspaces
side-by-side, then applies an extra step of translation to center to
the active workspace. This extra step, however, gets in our way because
now we need tighter control of the workspaces positions in allocation,
in order to properly interpolate them.
Move the translation of workspaces to the allocation code itself, and
remove the extra translation step.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
Currently, WorkspacesView positions each workspace on a
per-page layout, each page with the allocated width and
height of WorkspaceView. This layout doesn't work well
with horizontal workspaces.
Layout workspaces side by side, instead of per page. The
layout is influenced by a "fit mode", which reflects the
different behaviors exposed in the mockup. This fit mode
represents whether a single or all workspaces will fit
available geometry.
The single fit mode is always used for now. Next commits
will make it switch to the all fit mode when in the app
grid state.
The translation_{x,y} also needed to reflect the switch to
a side-by-side layout, and use the geometry of the workspaces
to determine the offset. Notice that, when the fit mode is ALL,
there's no translation applied.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1613>
Nowadays gjs allows to omit get/set accessors for read-write properties,
and will define reasonable defaults in that case. In many cases we don't
need anything more than the default handling, let gjs handle those props.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1611>
The app grid itself now is horizontal, and is displayed beneath
workspaces, above the dash. This makes the indicator animations
out of place, as they're not coming from the edge anymore.
Use PageIndicators for both FolderView and AppDisplay.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1629>
The new window preview overlay requires getting the app icon for a
window from the window tracker when it gets initialized. The window
tracker listens for the same 'window-added' signal on the MetaWorkspace
that the gnome-shell Workspace listens for to add the window preview.
The window tracker however reconnects all its signal handlers whenever
the number of workspaces changes, which means that its signal handlers
get called after the ones in Workspace ones. So by the time the
'window-added' handler in Workspace is called, the window tracker does
not have an app associated with the window.
To fix this ensure that all window related signal handlers in Workspace
are run after the ones in the window tracker.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3656
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1625>
Currently, there's one animation for the whole canvas. While it looks fine
with just one screen, it causes windows to move between screens when
switching workspaces. Instead, have a separate animation on each screen,
and sync their progress so that at any given time the progress "fraction"
is the same between all screens. Clip all animations to their screens so
that the windows don't leak to other screens.
If a window is placed between every screen, can end up in multiple
animations, in that case each part is still animated separately.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1213
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
Currently, the workspace swipe transition only has one workspace in each
direction. This works until you try to do multiple swipes in quick
succession. The second swipe would continue the existing transition, which
only has 2 or 3 workspaces in it, and will hit a wall.
To prevent this, take all workspaces and arrange them into a column or row,
depending on the layout, and use that as a transition.
For the transition that happens when focusing a window on another workspace
(for example, via Alt+Tab), still use only two workspaces instead of all of
them.
Since we don't support layouts other than single rows/columns anymore,
diagonal transitions aren't supported anymore, and will be shown as
horizontal or vertical instead.
Since nw alt-tab and gesture transitions are different, don't allow to do
both at once, that is, disable swipe tracker when a programmatic transition
is going. This will also conveniently cancel a gesture transition if a
programmatic one is initiated while a gesture is in progress.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2612
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
In future we will need to use window clones to better support multiple
monitors. To avoid having to hide every window, show wallpapers behind
the workspace transition: one per monitor.
Put the wallpaper into a separate class right away, later it will be
useful to make the animation per-monitor.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
Simplify the code a bit. The workspace group is relatively self-contained,
so split it from the general animation. Reimplement _syncStacking().
This will help a lot later, with workspace strip and multi-monitor support.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1326>
We always request a natural width based on the maximum thumbnail scale,
but may very well use a smaller scale when allocating. This currently
results in thumbnails being off center, fix this by distributing any
extra space evenly before allocating thumbnails.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1620>
Accessing GObject properties from JS has proven to be quite slow because
of the JS->C->JS roundtrip involved. With the WindowPreview this
actually has an impact since we're accessing those properties very often
while creating new layouts.
So cache the boundingBox and the windowCenter properties of the
WindowPreview using a this._cachedBoundingBox JS object. This might
speed up opening the overview with lots of open windows significantly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
Make computeScaleAndSpace() return an array including scale and space so
we no longer have to access the layout object from outside.
With this we also no longer need to set layout.space, since only the
scale property is needed in computeWindowSlots().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
Start cleaning up the whole mess around the layout object a bit and
return a new object in the LayoutStrategies computeLayout()
implementation. This object is supposed to be opaque to the API user and
will only be passed to the layout strategy.
For now, keep setting a few things on that object from outside, we'll
clean that up later.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
Only keep computeLayout, computeWindowSlots, computeScaleAndSpace and
the contructor in the superclass, the rest is actually layout specific
and won't apply anymore when we introduce the new vertical layout
strategy.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1617>
Move the background to the Workspace class by introducing a new container
called WorkspaceBackground, which handles clipping the background to the
workarea.
Move the click action from WorkspaceDisplay into each workspace.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1599>
When the original animation was implemented, workspaces would only
ever be added at the end. We therefore got away with not having a
separate EXPANDING stage corresponding to the existing COLLAPSING
one when animating out.
Since support for creating in-between workspaces via DND was added,
this is no longer the case. And now that the thumbnails are centered,
the jump is quite noticeable.
Address this by adding new transitional states, so that we can
expand new thumbnails before scaling them in.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1609>
Make the slide property control the workspace scale, so that new workspaces
scale up, and destroyed workspaces scale down. The scale is done horizontally,
and only slightly vertically, as per design direction.
Rework the state tracking mechanism to remove the COLLAPSING state, since there's
no split between sliding out and collapsing anymore. Also remove the corresponding
'collapse-fraction' property from WorkspaceThumbnail.
Make ThumbnailsBox.vfunc_get_preferred_width() consider the slide-position property.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
There are situations where MetaWorkspaceManager and ThumbnailsBox disagree
on the number of workspaces, for example when animating them out. It's more
important to follow the visible number of workspaces while they're updated.
Make vfunc_get_preferred_width() and vfunc_get_preferred_height() use the
current number of workspace thumbnails to calculate their sizes, instead of
MetaWorkspaceManager's n-thumbnails property.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
ThumbnailsBox currently allocates each workspace thumbnail using their
porthole size, and scales them down using scale-x and scale-y. This is
slightly problematic since it doesn't allow for properly styling these
thumbnails through CSS.
Rework ThumbnailsBox to allocate workspace thumbnails at their actual
sizes, and scale down the '_contents' actor inside WorkspaceThumbnail.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
Allocate workspace thumbnails horizontally. This requires introducing code
to handle the RTL direction. Do a small rewrite of the DnD hover method to
be simultaneously simpler and easier to follow, and work correctly on RTL.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
This is now all centralized in the apps page, so move the workspaces
thumbnails to ViewSelector's apps page. This allows us to remove
all the slider controls too, since they're now unused.
The transition between showing the workspaces, and the app grid, is
based on the most recent mockups: scale and move it down, and fade it
out.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
Now that there's only a ACTIVITIES and a SEARCH page, the old method of handling
keyboard tabbing (extra parameters to ViewSelector._addPage()) limits what we can
do.
Manually set up the Ctrl+Alt+Tab support for each element.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
Add them both in a StBoxLayout subclass with a vertical layout. This
new ActivitiesContainer class already contains an adjustment controlling
the transition between workspaces and app grid states, and althought it
is internal to it, it'll be easy to integrate with gestures in the
future.
Notice that AppDisplay is added before WorkspacesDisplay. That's because
we want the paint order to paint WorkspacesDisplay on top of AppDisplay.
Switch the ViewsPage enum to call this page ACTIVITIES, and adjust the
only caller in OverviewControls to it. At last, rename '_appsPage' to
'_activitiesPage' to also reflect the name change.
The usefulness of organizing this code in pages is lost here, but this
is a transitional state, and pages will be removed in future changes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1593>
Only the area used by favorite apps can be used as drop targets, it
is not possible to add new favorites between the running apps at the
end. While that behavior makes sense, it is currently impossible to
distinguish the two areas with confusing results.
Address this by adding a visual separator between favorites and
running apps.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1606>
WokspacesDisplay simply remaps the scroll direction into the next
workspace, but that doesn't account for the new horizontal layout.
Scroll horizontally on horizontal layouts when scroll direction is
on the vertical axis.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1603>
The scroll adjustment's upper value corresponds to the number of
workspaces, not to the last workspace index. We want the latter
when mirroring the layout in RTL locales, so subtract 1.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1598>
Now that apps either appear in the dash or the app grid, it makes
sense to allow DND between the two components to add and remove
favorites.
Currently this only works for adding items to the dash, update the
app grid code to also accept drops from the dash.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1594>
We use a custom actor to make sure that the show-apps button remains
visible even when there's not enough space to show all icons.
We can achieve the same result with much less code, by using a custom
BoxLayout layout manager for the icons to override the minimum width.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1592>
With the transparent top bar in the overview, constraining to the
primary monitor's workarea causes the (now visible) area beneath
the top bar to not have the darker background, which causes a visual
discontinuity in the layout.
Don't constrain to the primary monitor workarea.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1590>
The code previously was using CSS to define row/column spacing and
padding which was combined with a subicon size computed in code relative
to the requested icon size.
In smaller icon sizes it was possible for the CSS spacing+padding + the
size of the two subicons to exceed the requested icon size. This then
would lead to the label being pushed down for app folders compared to
other icons.
Another more severe issue caused by this would happen if the first item
in an icon grid was an app folder. Then the calculation for the maximum
allowed icon size could be off, leading to all icons in the grid
becoming smaller than actually necessary.
This commit changes this to use homogeneous row and column layouts to
evenly distribute the remaining spacing instead of using a fixed CSS
value.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3069
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1581>
This is some leftover from code that was used to keep track of volumes
added/removed while the screen was locked before the move to a
components system in 2a800e4c. All that the remaining code does is
filter devices from an empty list.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1579>
Now that the Dash is horizontal, the popup menu of the Dash icons must
show up, instead of left/right.
Make AppIcon.popupMenu() receive an optional parameter with the side
to show the menu, using St.Side.LEFT as default. Override this method
in DashIcon to always pass St.Side.TOP.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1559>
And move it to the bottom of the overview. Change the height-based calculation
of the icon sizes to be width-based. Put the DashFader in a vertical box, and
make all corners of the Dash equally rounded.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1559>
Between the GTK4 port and the latest GTK4 version, calling realize()
on a newly created window to force its surface to be created stopped
working.
So instead, wait for the window to get realized regularly to set its
parent.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1574>
With the previous preparations in place, it is time to take the plunge.
As both the app and the portal use the same small library for handling
external windows, port everything at once to avoid the hassle of building
and installing two versions of the library.
With the portal using GTK4 now, all extensions must port their preference
widgets as well.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1495>
We currently use separate frames for the details expander and the
expanded details. That layout works as long as frames are boxy (as
in the default GTK3 style), but breaks down with rounded corners
(as in the default GTK4 style).
In order to work with either style, adapt the layout to use a single
surrounding frame and appropriate borders as separator.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1495>
GTK4 will remove the GtkHeaderBar:title property, so stop using it
and set the window's title property instead, as that's what headbars
use in both GTK3 and GTK4 unless explicitly overridden.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1495>
There's little point in setting properties to their default value,
so stop doing that.
(GtkFrame:shadow-type actually defaults to "edged-in" rather than "in",
but all types other than "none" are treated the same nowadays)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1495>
The SHADE_ANIMATION_TIME variable sets the duration of the animation of
the background shading that is done when showing the overview. As
explained in the code-comment, that value must be smaller than the
animation time of the overview.
Now since we're going to start animating the background color of the
panel when showing the overview and we're going to use the overviews
animation time for that, we want to make sure the shading of the
background image and the animation of the panel are kept "in sync",
otherwise the transitions would look bad.
So slightly increase the value of SHADE_ANIMATION_TIME to 240 (the
overviews animation time is 250) to make sure those happen in the same
timeframe.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1397>
The current way of indicating focus of elements in the panel does not
work very well with a fully-transparent panel, a line at the bottom of
the panel doesn't make too much sense if there is no real panel, but
only the text and icons.
To make the indicators look better in this case, switch to a pill-shaped
background color to indicate the focus of items in the panel.
For this to look good, there has to be a small black border above and
below the background, this also requires increasing the height of the
panel (from 1.86em to 2.2em) for visual purposes.
Also, since we now no longer need to color the lower bottom of the
panel, we can remove the custom drawing code for the border of the
panels corner, so do that.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1397>
Currently the hint reflects the `active` state, which effectively
corresponds to the screen blank. That's a bit surprising considering
the name, plus the `active` state is already exposed by the ScreenSaver
D-Bus interface for anyone interested.
It seems reasonable that the `LockedHint` property reflects the lock
state, so change the handling to do exactly that.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/351
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1561>
We want to either handle a scroll event ourselves, or delegate it
to the swipe tracker. What we never want is StScrollView's default
handler that doesn't have any knowledge of pages, so disable it.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1560>
Even if they're in the end of the list. So far we've managed to not be affected
by this bug because until GNOME 3.38, workspaces didn't have a background, and
there was no way to navigate to these leftover workspaces, but with the proposed
overview changes for GNOME 40 it'll be very much visible.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1560>
When handling all scroll directions, it is imperative to ignore emulated
events. Otherwise we may get the wrong scroll direction, e.g. when natural
scrolling is enabled.
Ignore pointer emulated events in WorkspaceDisplay._onScroll().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1560>
All subclasses of BaseAppView now are horizontal, thus we
don't need to deal with the vertical case anymore.
Remove the corresponding parameter from the BaseAppView
constructor, and move the StBoxLayout that both AppDisplay
and FolderView have in common into the base class.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1554>
Recent commit [1] added a strong light border around user avatar
icons, in accordance with design mockups.
As a probably unintentional side-effect, the border was also added
around the symbolic fallback icon, which is displayed whenever the
user avatar is not available. This doesn't work well with the current
design, as the strong border makes the subtle fallback icon
background indistinguishable. Additionally, it doesn't match the
design mockups for the symbolic avatar icon [2].
Correct this by adding a style class for when avatar image is used,
and apply the border only for that case.
[1] 498710c2ec
[2] https://gitlab.gnome.org/Teams/Design/os-mockups/-/blob/master/lock-login/username-based-login.png
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1490>
When checking for a suitable icon size, Dash currently checks which
of the hardcoded icon sizes is smaller than the calculated available
size.
On some circumstances, however, when the calculated available size
is exactly equal to the hardcoded icon sizes, Dash selects a smaller
size. This cascades (the next icon size is exactly the smaller size,
etc) and ends up with always Dash selecting smallest size available,
even with plenty of available space.
Check if the calculated available size is smaller or equal to the
hardcoded icon sizes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1533>
Updating scroll position may have significant side effects, e.g.
switching workspace; this should never happen during allocation, as
we're in the middle of painting a frame. So, put it in an idle callback
if we're doing it from an allocation to have the side effects happen the
right time.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1527>
Screen magnification is the compositor's business, not that of "random"
unprivileged tools. And for cases where a more specialised behavior is
wanted, an extension likely does a better job than a consumer of the
D-Bus API.
In addition to that, exporting the interface has been broken for an
unknown time, because the object that holds the implementation isn't
referenced and thus ends up being garbage collected, whoops.
And last but not least, this gets rid of the last public D-Bus name
that isn't clearly in the system namespace (org.gnome.Shell,
org.gnome.Mutter, org.gtk).
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3452
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1523>
Simplify the opacity dance to simply setting it to the initial value
before animating (0 when animating in, and 255 when animating out),
and to the final value after the spring animation is done (vice-versa).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1518>
To run the spring animation, IconGrid uses the transformed position and size
of the icons. This works okay when IconGridLayout doesn't need to update the
icon sizes, but looks bad when IconGridLayout selects a different icon size.
Wait for the icon sizes to be recalculated, and the icons beallocated, before
running the spring animation. If no icon size update is pending, run the spring
animation directly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1518>
In the future, both AppDisplay and FolderView will be horizontal, and thus
using the orientation to determine whether to use animated indicators won't
be enough.
Use a different flag to control that, and make FolderView not use animated
page indicators.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1518>
SwipeTracker connects to signals of the stage, but doesn't disconnect on
destroy, leaving them hanging and potentially running callbacks for
destroyed objects.
This is visible when removing a folder by dragging all icons out, and
running the swipe gestures, which will produce a bunch of warnings.
Explicitly destroy, remove, and disconnect the swipe tracker.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1518>
Make it subclass ClutterActor, since we don't need any of StWidget's
features. Pass the source actor of the bind constraint in the
constructor, and remove the extra method to set the source actor.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1518>
ControlsLayout is a tiny layout manager whose only purpose
is emit "allocation-changed" after allocation. This signal
was listened to update the workspaces actual geometry.
However, since d66cd0d206, ControlsManager doesn't listen
to this signal anymore, rendering the class useless.
Remove ControlsLayout.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1518>
How and if notifications are shown is controlled by NotificationPolicy
objects. But ever since 098bd45, only notification daemon sources or
notifications associated with an app are hooked up to GSettings.
The hardcoded default policy for built-in notifications (including
those provided by extensions) arguably made sense back then, but
now that the main setting has been rebranded as "Do Not Disturb"
and is exposed prominently in the calendar drop-down, following
GSettings is a better default.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3291
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1511>
When selecting the best icon size for the available area, we
iterate from the biggest icon size to the smallest one, and
stop when finding a size that fits the available area.
However, the 'bestSize' variable is only updated when the
available area is positive. This is problematic in super bad
cases like when none of the icon sizes actually fit the availabe
area, which was hit with a previous iteration of this branch.
Make sure to update the best size while iterating, so that the
smallest size is selected even in such bad cases.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1510>
Use the Clutter.ActorAlign.FILL alignment by default, which
expands the grid until max-row|column-spacing is hit. This
was the behavior we originally wanted for the icon grid, and
it's finally being realized.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1510>
This is a new property to control the padding around each page,
as opposed to the padding around the entire container.
Following the original design of IconGridLayout [1], changing
the page-padding property doesn't trigger relayouts; the container
is responsible for queueing a relayout appropriately.
[1] 3555550d5e
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1510>
Plain classes are private to their file, so accessing them from
another module results in the following warning:
That property was defined with 'let' or 'const' inside the module.
This was previously supported, but is not correct according to the
ES6 standard.
Fix by assigning the class to a public variable instead.
(Eventually switching to ES6 modules with proper imports/exports will
fix this as well)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1512>
The grid icons in the search results page doesn't expand to
acommodate the multiline label, resulting in the multiline
label to overflow behind the list search results. However,
after 548d3b62d, it was possible to trigger this behavior
with keyboard focus.
Don't update multiline labels for search results.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1509>
Adding children to the WorkspaceLayout without calling addPreview() is
not supported, so let's log an error in case that happened.
We also have to allocate that child an empty ClutterActorBox, otherwise
Clutter will complain loudly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1481>
Clutter expects actors overriding the allocate vfunc to allocate all
mapped children of the actor, otherwise bad things happen.
So make sure we actually allocate all our visible children in our custom
allocation functions, and since we don't want to give them a real
allocation, just pass them an empty ClutterActorBox.
It would be nice if we had a way to hide children during the allocation
process where no relayout is queued like gtk allows with
gtk_widget_set_child_visible(), then we could avoid those weird empty
ClutterActorBoxes.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3098
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1481>
When logging out or terminating gnome-shell, mutter will unmanage all
open windows, triggering the window-close animation in gnome-shell and
very quickly after that emitting "kill-window-effects". That means we'll
call _destroyWindowDone() to cleanup our animation data, but at this
point the MetaWindow of the window is already gone, so we get an error
that get_meta_window() returns NULL.
Fix that by checking whether get_meta_window() returned NULL and if it
did, don't access the window.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2018
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1483>
If the adapt to size occurs after the grid page has been changed the
page is set to zero. This patch just keep the current page with the same
value that it has before.
Fix https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3388
gjs improved its default property getter/setters, and as a result it
is no longer possible to set read-only properties.
Add proper getters (backed by private properties) to fix the resulting
errors.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3203
`shouldShowApp()` is called in `_addFavorite`, so adding a favorite when
this isn't true won't work. Also, it seems when this is false, favorites
that do exist won't be shown anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3342
When initializing the shell, we create the magnifier, and (normally)
let it disabled. This still toggles cursor visibility on, which is
not right since there's other considerations to take during
initialization.
Only do this after actual changes to the magnifier state, so
initialization is left unperturbed.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1486
When support for notification sounds was added, it made some sense
to keep the 'enable-sound' setting independent from 'show-banners'.
However that changed when 'show-banners' was rebranded in the UI as
"Do Not Disturb", as sounds are at least as disturbing as the banners.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2873
We sometimes add dialogs multiple times to the WindowPreview, for
example for modal dialogs we receive both the "window-added" and the
"window-entered-monitor" signal, which means we call
WindowPreview.addDialog() twice.
We handle that fine already in the WindowPreviewLayout and return NULL
in case the window already was added, so simply handle that NULL return
value and bail out of WindowPreview.addDialog() in this case.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1482
Most media players have a media player that shows the title of a song
and artists in the song. In those media players the title is
highlighted (bold text) and the list of artists is under the title.
Shell does the exact opposite in the player in the notification area.
Example media players: Spotify, Rhythmbox, GNOME Music
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1480
IconGridLayout uses the biggest minimum size to allocate its
children. Next commit will make app icons with long names show
not ellipsize on hover, and it is important that the icon itself
is able to follow that.
Use preferred size if it's bigger than the minimum size.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1477
When the icon area gets allocated additional space, we want the
icons centered rather than left-aligned. This may happen in locales
with long-ish translations for the title or buttons when only a
subset of possible icons is shown.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3307
Commit de610a13f1ad1e7e34d4b9a81df58d4da3693059 in mutter made it
impossible to access the actors last allocation after unmapping it,
this broke the scale-up/down animation when starting a drag.
Fix that animation again by saving the actors transformed size before
unparenting (and therefore unmapping) the actor instead of afterwards.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1475
The screen shield code listens for motion events on the stage
so that it can hide the pointer until the user moves the mouse.
Unfortunately, if the user never moves the mouse, the signal
handler connection gets leaked.
This commit makes sure the connection gets disconnected when the
shield goes away.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1459
The screen shield watches for motion events to know to display
the pointer when the user wiggles their mouse.
It checks for motion events by looking at the event type and
seeing if it is of type `Clutter.EventType.MOTION`. To do this
comparison it uses the equality operator (==). Using the equality
operator isn't considered best practice, because it can returns true
when comparing disparate types, if those types happen to be equivalent
after coersion.
From a code resiliance point of view, it's better to use the
identity operator (===), which requires both sides of the comparison
to be of the same type.
As a policy, any legacy code that gets changed or moved should be
switched away from the equality operator to the identity operator, if
appropriate.
This commit makes that change as prep work for a fix to that part of
the code.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1459
When using `Actor.ease_property` if the property starts with '@' and the
duration of the transition is zero (which may happen if the actor is not
mapped even if a non-zero duration was passed to `ease_property`), the
impl will try getting the actual target object where the property should
be set.
This works fine for most cases but it currently throws an error when
passing '@content.*' properties. Fix this by handling '@content' as
a property of `actor.content` (used by MetaBackgroundActor when
showing the overview).
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1461
The panel corners try to match their style to the buttons closest
to them. In order to make sure the corner styles stay in sync with
their neighboring buttons, they connect to the style-changed signals
of the buttons.
In order to make sure the style-changed signal handler isn't leaked,
it gets disconnected when the button is destroyed.
Unfortunately, the destroy signal handler connection itself gets leaked!
This commit ensures the destroy signal handler gets disconnected any
time the neighboring button is re-determined.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1460
With the new versioning scheme, the previously-minor version gets
shifted up to major, and unstable releases are marked by non-numeric
"versions" rather than uneven numbers. Reflect that in the extension
version check.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1456
Clutter nowadays omits reallocations when only the stage position
changed, that is when the allocation relative to the parent changed.
As a result (apart from better performance of course), workspaces
in the overview may now end up with an outdated "actual geometry"
in case the overview moved to a new primary monitor (of equal size
as the previous one).
Work around that by emitting a signal from the overview on allocation
changes, and use that to update the cached geometry.
We can revert that change once workspaces become part of the regular
overview hierarchy.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3211
When dragging icons out of a folder dialog, there is a very peculiar
combination of steps that may break GNOME Shell:
1. Open an app folder dialog
2. Start dragging an icon to outside the grid
3. Wait until the popdown animation starts
4. Before it finishes, drop the icon
5. See the warnings / crash
That's caused by the source icon being destroyed after the delayed
move timer starts, and before it finishes.
Protect against the source icon being destroyed before the delayed
move timeout triggers by connecting to the 'destroy' signal and
removing the timeout on the callback. Use a single field, called
'_delayedMoveData', to store all data related to delayed moves.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1447
When dragging an icon outside of a folder dialog, there's a small delay
before the dialog pops down. If the icon is dropped during this delay,
the drag is cancelled, and the icon continues to be in the folder.
However, this behavior turned out to be problematic, and it was a common
point of failure that throwing icons outside folders wouldn't work.
Remove the icon from the folder when dragging it to outside the dialog.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3092https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1447
At the end of BaseAppView._clearAnimateLater(), the '_grid' actor's opacity is
set to 255. As it turns out, _clearAnimateLater() is called, among others, by
vfunc_unmap(). However, unmapping is part of the destruction process, and at
the time it is called, '_grid' is already destroying, which makes GJS complain
about accessing an invalid object.
Don't change opacity on BaseAppView._clearAnimateLater(), and instead move it
to the couple of places outside vfunc_unmap() that call it.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1447
After dragging an icon to inside a folder, we do not save the grid layout,
leaving the icon's position stored when it actually isn't there anymore.
Fix that by saving pages whenever folder apps change.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1447
To delete a folder, FolderView needs to reset all keys under that particular
folder's GSettings path. That generates 5 'changed' signals, all of which
end up calling AppDisplay._redisplay(), which is costly.
Don't emit 'apps-changed' when deleting a folder.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1447
If you try and drop an icon that's in the same page, but before the
drop target, it'll be one position ahead of where it should be -
because we just removed one icon before the target position.
Adjust the final position of the to-be-created folder.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1447
This new public API moves items without removing and readding
them, which allows us to avoid some tricky behavior. Noticeably,
following the original design described at 3555550d5, the new
IconGridLayout.moveItem() method does not call `layout_changed`.
This is done by IconGrid itself, queueing a relayout.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1447
When adding an item to the app grid, the item is added to
a sorted array. This is calculated by adding all visible
items in pages before the one being modified. Future commits
will need this to move items without reparenting them, so
factor this code into a separate function.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1447
This was missed in commit 96f63b08c2 when splitting the combined
layout+scrolling method into allocation and translation.
Add it back to prevent windows from other windows leaking into view
during the transition.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3208
We couldn't clip workspaces views during the overview transition
when we used the "porthole" approach, but as view's allocation
now always matches the expected visible area, we can just apply
the clip unconditionally.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3208
Commit ff3d32dd18 added a custom DashIcon subclass that disables
all DND methods from ancestors, including canceling the context
menu timeout and emitting the overview's item-drag-begin signal.
All we want is opting out of the parent's scale-and-fade behavior,
so override those methods instead.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3209
Currently the width of the calendar column is solely determined
by the calendar, while other elements are ellipsized as necessary.
While that is the desired behavior for the events-, world clocks-
and weather sections, we don't want to cut off the date in the
header. However switching to bold text made that more likely in
non-English locales or when using large text, so explicitly take
it into account for the width negotiation.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2230
The purpose of password peeking is to spot and correct errors;
the latter isn't possible when the entry is non-editable, so
we can hide the password again while authentication is ongoing.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3138
BaseAppView not disconnecting from the 'app-filter-changed'
signal means parental controls may trigger callbacks on
a destroyed grid, which tries to access destroyed icons,
which spams the journal with stack traces.
Disconnect from parental controls when BaseAppView is destroyed.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1441
We split the search string into words using whitespace, while
GLib.tokenize_and_fold() splits on any non-alphanumeric characters.
That is, a valid search term like ',' will be tokenized as [], so
the original non-empty terms may get mapped to an empty array.
And as [].every() returns true for any condition[0], we end up
matching *all* system actions in that case. We want the exact
opposite and not return any results, so handle that case explicitly.
[0] https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/everyhttps://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3169
It's best to not mix transient indicators with (probably) permanently
visible items, so move the remote-access indicator (which also handles
screencasts now) to the position of the old screen recorder icon.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1438
A window preview's floating geometry is scaled down according to the
workspace's allocation, while the layout geometry is computed directly
for the available space.
For previews that maintain their real size in the layout geometry,
that scaling leads to a distracting size bounce when transitioning
between both layouts.
Address that by not allowing the scaled floating size to drop below
that layout size (which is at most equal to the unscaled floating size).
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2968
As per GSettings documentation, it is necessary to read a particular
key at least once before being able to connect to the corresponding
'changed::' signal.
Read the 'app-picker-layout' key before connecting to the changed
signal.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1428
It is wasteful to emit layout-changed when updating pages, because
the caller (AppDisplay) already has an updated state by the time
this is called.
Only emit 'layout-changed' if the GSettings notification doesn't
come from AppDisplay updating the pages.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1428
widget.get_effect(...) can return null while locking the screen, resulting
in a TypeError. In this situation the screen ends up black with a cursor
but never going to sleep, and moving the mouse brings the old screen
contents up but does not allow unlocking.
unlockDialog.js assumes that widget.get_effect will return non-null,
but other places such as getWindowDimmer in windowManager.js go out of
their way to be more careful.
[smcv: Add commit message, remove hard tabs, add missing semicolon]
Resolves: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3071
Bug-Debian: https://bugs.debian.org/968440
When promisifying async operations in commit 764527c8c, the
finish function for read_line_async() was sneakily changed from
read_line_finish_utf8() to read_line_finish().
That is, the call returns a Uint8Array now that requires an
explicit conversion to string.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1407
Since gjs moved to mozjs60, return values of int8_t arrays can
no longer be treated as strings. We originally made the conversion
conditional to keep working with the (then) stable gjs release.
That was two years ago and we require a more recent gjs nowadays,
so there's no good reason for keeping the old code path.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1407
When the last item of an IconGridLayout page is removed,
the page itself is removed too. However, the indexes of
items of next pages are not updated, which mess up the
layout manager state.
Update the page index of the items at forward pages when
removing a page.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1406
While the performance framework was originally written to collect
performance metrics, driving the shell by an automated script is
also useful to ensure that basic functionality is working.
Add such a basic test, initially checking top bar menus, notifications
and the overview.
Eventually it would be nice to separate the automatic scripting from
gathering performance metrics, but IMHO that can wait until we switch
from gjs' custom imports system to ES modules.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1396
global.run_at_leisure() is used from automated scripts to schedule
a callback when the shell is idle. However since we moved away from
Tweener, animations are no longer taken into account; fix this by
marking transitions as "work" if the convenience ease() functions
are used.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1396
The original scripting framework was based on SpiderMonkey's
pre-standard generators, and was simply translated to the
corresponding standard syntax when updating it to work with
recent JS versions.
We can do even better by using the standard async/await pattern
instead of generators/yield.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1396
If the user's battery power is low, we should not check the checkbox to
install updates by default. Rationale: if the user's battery is not low,
it's very unlikely to run out during a normal system upgrade. Low
battery is defined as any level below 30%, matching our battery status
indicator.
We'll also change the battery warning to only display when battery is
actually low. However, we will still always warn on battery for full
system upgrades, since these are expected to take a long time.
Future improvement: it would be nice to make the checkbox insensitive
when on low power. However, I don't think we currently have a proper
style for insensitive checkboxes. I was unable to make it look good.
Lastly, note that I did not test this on a laptop. I tested this by
mocking the return values of _isDischargingBattery() and
_isBatteryLow().
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2717
A side effect of removing the action buttons in favor of a regular
submenu is that we are a lot less constrained by size. So instead
of lumping "Restart" in with "Power Off", make it a separate menu
item.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2202
We will split off restart from the existing shutdown dialog, and
instead offer it as a separate menu item in the session submenu.
But before doing that, make sure that the existing restart dialog
exposes the same feature set as power off.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2202
This implements the "Alt" behavior for the "Reboot" button as outlined in
the design here: https://wiki.gnome.org/Design/OS/BootOptions
Note I've tried implemeting this with the AltSwitcher class from
js/ui/status/system.js first, but that puts the button in a St.Bin()
which causes the button to think it is the only button on the dialog
and makes it have rounded corners on both of its bottom corners.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/199
Immediately add buttons to the dialog instead of first building an
array of button-info structs.
This is a preparation patch for adding support changing the "Reboot"
button into a "Boot Options" button when Alt is pressed.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/199
Fix what is probably a copy-paste error and return false instead of a
CONTINUE DragMotionResult which is only meant for dragMotion events, not
drop events. This makes sure we don't create a folder when dropping an
app over the drag leeways of another icon.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1389
For more obscure network configurations, we need to launch the
corresponding Settings panel with additional parameters, so we
cannot simply launch the .desktop file.
However we can do better than spawning a command line: Control center
exposes an application action we can use instead, so the process is
launched with the appropriate activation environment and startup
notification support.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1385
This fixes an issue where the indicator can be out of sync until the
RfkillManager (used by it) properties change.
The problem is that multiple instances of the indicator will use
the same RfkillManager instance (getRfkillManager() returns a singleton)
that only guarantees to emit the changed signal in two scenarios:
when the D-Bus proxy connects and when the proxy properties change.
If by the time an indicator is instantiated the RfkillManager's D-Bus
proxy is already connected, that indicator would only sync its state
when the RfkillManager properties change.
Let's fix that by always syncing the state on construction - in the worst
case scenario the RfkillManager's D-Bus proxy won't have connected yet
and the indicator state will be temporarily out of sync but once it gets
connected the indicator will sync again with the correct state.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1386
To do this, we now wait for the start/stop job to complete. We also have
two targets in gnome-session to ensure that everything is working as
expected.
In order to start the services, we simply request the
gnome-session-x11-services-ready.target unit, and wait for it to become
available. To stop, we use the gnome-session-x11-services.target unit
which should stop all services in a way that is entirely race free.
This requires both gnome-session and gnome-settings-daemon changes to
work (which are in the corresponding merge requests).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/895
Move the screencasting into a separate D-Bus service process, using
PipeWire instead of Clutter API. The service is implemented in
Javascript using the dbusService.js helper, and implements the same API
as was done by screencast.js and the corresponding C code.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1372
If something started the service, but crashed before managing to make a
method call, we'd end up with the service running indefinitely. Fix this
by queueing a shutdown check immediately on startup.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1372
If a remote access is marked as a recording, visualize it the same way
as a built in recording. Also don't stop it if there is an actual screen
sharing going on, so that one can use a plain "recording" while still
disabling what is an actual screen sharing.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1372
While we do have some handling for removing the active menu, it has
been a no-op for years. The bit that we really care about from the
PopupMenuManager's point of view is the existing grab though. Drop
that instead of calling _closeMenu() directly; ungrabbing will still
call the method indirectly, and it will still be a no-op :-)
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3022
At the moment, if a user switches to the login screen vt,
the login screen fades in whatever was on screen prior, and
then does a reset.
It makes more sense to reset first, so we fade in what the
user is going to interact with instead of what they interacted
with before.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2997
On X11, clients can grab keyboard on pointer (for example for popup
menus), and as a result the pushModal() call when opening the overview
fails.
However when the hot corner was used to toggle the overview, we still
show the ripple animation in that case, which is confusing as the action
did not actually happen.
Fix this by only showing the ripples if the overview is animating after
calling toggle(), as that should be a reliable indication of whether
the call was successful.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3005
As backgrounds are cached, it is possible that we never emit the
'loaded' signal added in commit f386103bc1. We are relying on the
signal though, so do the same as Background and emit the signal
from an idle if the background was already loaded.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1371
Currently, the login animation can occur before the user's wallpaper has
been loaded. When this happens, we wind up displaying a solid blue
background for half a second or so before the proper background is
displayed. This looks jarring and bad. It's great that we can start
GNOME quickly, but starting up before the wallpaper is ready is *too*
quickly.
I've been meaning to fix this since 2014. Better late than never! We can
just have BackgroundManager emit a loaded signal the first time it loads
its first background, and have the startup animation code wait for that
before proceeding.
Some of this code is by Florian, who helped with promisifying. Thanks!
https://bugzilla.gnome.org/show_bug.cgi?id=734996
On Wayland, navigating menus with the keyboard would not open drop-down
menus when NumLock is enabled.
That's old issue (gnome-shell#550) that was not completely fixed with
commit 88556226 because the lock mask needs to be filtered out in
_onKeyPress() as well.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/550
As per design discussion, the first page is a somewhat of a special
page where we really don't want to change anything unless necessary.
Append new icons at the first available slot after the first page.
Make the placeholder icon be appended to the first available page
as well, since it's always used when dragging from folder dialogs.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1284
When the app folder dialog handles a drag hover, it starts a timeout
to popdown if dragging outside the "real" dialog area. However, when
dragging inside it, BaseAppView handles all drag hover events which
would disarm the popdown timeout. In cases like this, it's almost
impossible to prevent the timeout from triggering, which always pops
down the dialog.
Add a drag monitor when handling any drag hover (which only happens
when dragging outside the folder's icon grid); and eventually disarm
the popdown timeout from the monitor's motion event. Remove the drag
monitor when dragging over the folder dialog again.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1284
App folders are now customizable, and the way to move icons to
another page is by throwing the cursor to either the left or
the right of the grid.
However, doing that triggers the popdown timeout, wich is 600ms
as of now, which is considerably short for such interaction.
Increase this timeout to 1.5 seconds.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1284
Now that the DnD code is shared between AppDisplay and
FolderView, we hit an unexpected problem: FolderView is
handling drag events even when the folder dialog is hidden.
As a side effect, this spams the journal with warnings.
Only handle drag events when mapped. On unmap, disable
the view's drag monitor, and disconnect from all drag
events.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1284
This code will be shared with FolderView in the next commit, so
avoid duplication already and move the to-be-shared code into the
base class.
Because BaseAppView can handle vertical and horizontal orientations,
adapt the drag overshoot code to also handle horizontal overshoot.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1284
When redisplaying, we currently only remove and add icons, but
never adjust the position of already added icons. If the icon
position changed, it wouldn't be reflected on the icon grid.
Make sure to move already added icons.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1284
