NMApplet will call removeConnection() unconditionally on all sections,
including those that had nothing to do with the connection in the first
place.
Fixes:
Gjs-WARNING **: JS ERROR: TypeError: this._connectionItems.get(...) is undefined
NMConnectionSection<.removeConnection@resource:///org/gnome/shell/ui/status/network.js:323
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMApplet<._connectionRemoved@resource:///org/gnome/shell/ui/status/network.js:1885
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=725958
The profile name is most often not useful (because it's an
autogenerated string like "Wired Connection 1"), and even when it
is, it's already available in the submenu.
https://bugzilla.gnome.org/show_bug.cgi?id=725586
To be able to correctly setup dbus policy, I had to change the expected
agent D-Bus API a bit: Now object path is fixed and not different for
each user.
https://bugzilla.gnome.org/show_bug.cgi?id=725082
Until now the arrows were the associated arrow
character of the font. This cause some problems like
different arrows for different fonts, and size can be
altered because of the font size.
To solve that, use an image for the arrows.
https://bugzilla.gnome.org/show_bug.cgi?id=720206
Multiple connections for the same device are mutually exclusive, so
a switch is not the appropriate UI metaphor. Use a radio item instead,
and provide a separate "Turn off" item to disconnect.
Behavior when there is only one connection is not changed, there
is a single Connect/Turn off item.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
We don't watch for timestamp changes, and sorting by name keeps
the order consistent and predictable. In practice, there should
be at most 3 or 4 elements, so the user will always read all them
at once and sorting is irrelevant.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
If the connection name is changed, the UUID doesn't necessarily,
so checkConnection would take the early return path. Make sure
we update the existing menu item too.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
The active_connection might be null, but the NMApplet code might
still belive the device wrapper is the primary connection (because
dbus signals are emitted one after the other).
(Also, remove an old and wrong comment about bluetooth in wwan code)
Fixes:
(gnome-shell:22511): Gjs-WARNING **: JS ERROR: Exception in callback for signal: icon-changed: TypeError: this._device.active_connection is null
NMDeviceWired<.getIndicatorIcon@resource:///org/gnome/shell/ui/status/network.js:475
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMApplet<._updateIcon@resource:///org/gnome/shell/ui/status/network.js:1790
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
_emit@resource:///org/gnome/gjs/modules/signals.js:124
NMConnectionSection<._addConnection/<@resource:///org/gnome/shell/ui/status/network.js:265
_emit@resource:///org/gnome/gjs/modules/signals.js:124
NMConnectionItem<._sync@resource:///org/gnome/shell/ui/status/network.js:137
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMConnectionItem<.setActiveConnection@resource:///org/gnome/shell/ui/status/network.js:169
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMConnectionDevice<._activeConnectionChanged@resource:///org/gnome/shell/ui/status/network.js:327
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=723570
This reverts commit 5d05b66902.
Had a long discussion with Bastien Nocera and Allan Day on IRC about
this and in the end we decided to go with the simple on/off controls for
now.
Conflicts:
js/ui/status/location.js
https://bugzilla.gnome.org/show_bug.cgi?id=723684
When exact accuracy (i-e GPS) is available, allow user to disable that.
When users don't want application to get their precise location, they
can now opt for network-based geolocation only, which can be
street-level at best.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Instead of relying on geoclue to store this user configuration, lets
keep it in gsettings. Geoclue is a system service and therefore is not
the appropriate entity to keep this info.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Now that we are indicating 'geolocation in use' to user, we better also
provide at least a way to disable geolocation. Once this is in place, we
can provide slightly better controls rather than simply on/off switch.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
This reverts commit a36bfced47.
get_available_connections() returns the connections that are
available right now, ie, with the currently visible APs, but
that might change while the dialog is open, so we can't use it.
https://bugzilla.gnome.org/show_bug.cgi?id=709128
To distinguish the bluetooth network menu from the bluetooth
menu proper, use the device name as the label.
Also, replace Connect with "Use as Internet connection"
https://bugzilla.gnome.org/show_bug.cgi?id=709353
The design says "when a network cable is connected", not
"When a network cable is connected and the link is up and we
have an IP etc. etc." (which is what ACTIVATED would imply).
https://bugzilla.gnome.org/show_bug.cgi?id=723570
Rather than just showing "No networks", inform the user if airplane
mode is on or if wifi is off, and allow the user to change that
from the dialog (if possible).
https://bugzilla.gnome.org/show_bug.cgi?id=709128
Ideally, we should keep scanning while the dialog is open, and
stop (or reduce the frequency) when it's closed. Forcing a new
scan when the dialog is opened empty is a close approximation
and increases the probability that the user will find the AP
he needs.
https://bugzilla.gnome.org/show_bug.cgi?id=709128
If airplane mode is enabled with an HW switch, we can't turn it
off from the menu, so make the menu item insensitive and
replace it with a helpful tip.
https://bugzilla.gnome.org/show_bug.cgi?id=709685
It's a lot simpler and doesn't require us routing the NMRemoteSettings
all the way through. It's still a bit complicated to do this for the
usual connections, so let's drop it for now.
The org.gnome.login-screen schema contains a key to disable the
power/restart buttons; our support for this fell victim to the
new combined status menu, add it back.
https://bugzilla.gnome.org/show_bug.cgi?id=711244
Some consumers may want to construct their buttons specially, so allow them
to do that by adding a new API that takes a button instead of a label.
https://bugzilla.gnome.org/show_bug.cgi?id=710137
Their use blocks activation of the default button by keyboard, which
is important for accessibility. Use a Clutter.ClickAction instead,
which doesn't have this problem as it only considers mouse events.
https://bugzilla.gnome.org/show_bug.cgi?id=710144
Since the agregate menu does 120% of font-size, make this
for all dropdown arrows in gnome-shell and rename the css
class to make clear that it is used in overall gnome-shell
https://bugzilla.gnome.org/show_bug.cgi?id=709564
Show "Hardware Disabled" when disabled by HW switch, and
generically "Disabled" when airplane mode is active, as
indicated by v4 mockups.
Note that bluetooth is not affected by NM handling of airplane
mode (and generally the firmware makes the USB bluetooth
adapter disappear when rfkilled), so this is in NMDeviceModem
instead of NMConnectionDevice.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
The property is on the NMClient, not NMDevice. Also, make sure
we disconnect the signal when the item is destroyed.
Also, connect to wireless-hardware-enabled, which we'll use soon.
https://bugzilla.gnome.org/show_bug.cgi?id=709635
If the active connection for the device is not the primary or
activating globally, it won't have the _connection and _primaryDevice
expando properties, so grab them from the settings object.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
The patch fixes the following warning, and along with it, the proper
destruction of the NMConnectionSection is performed so that items get
correctly removed from the menu.
(gnome-shell:24528): Gjs-WARNING **: JS ERROR: TypeError:
this.statusItem is undefined
NMConnectionSection<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:173
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMConnectionDevice<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:292
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMDeviceModem<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:448
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._removeDeviceWrapper@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1421
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._deviceRemoved@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1416
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
https://bugzilla.gnome.org/show_bug.cgi?id=709248
Activating the GDM login screen switches VT and causes X to freeze
event processing (because it lost the drm master), so must make
sure to have painted the lock screen at least once before proceeding,
or the user can go back and see the unlocked desktop.
https://bugzilla.gnome.org/show_bug.cgi?id=708051
For extremely silly reasons with how the class framework works, the wrapper
method requires "this" to be bound in order for it to work, or else we'll
emit errors in strict mode.
https://bugzilla.gnome.org/show_bug.cgi?id=707892
We watch changes in the VPN state, not the active connection state,
so if we use the active connection state, we might miss an update
(because the VPN property is notified before the other one)
https://bugzilla.gnome.org/show_bug.cgi?id=706262
Descriptions are only added after all devices are read (thanks
to the disambiguation in libnm-gtk), but we use them immediately
when we call _sync() in various points (such as checkConnection())
https://bugzilla.gnome.org/show_bug.cgi?id=706262
When we implemented the new designs, we lost the ability to suspend
from the system menu. Re-enable this ability by re-adding the hidden
"Alt" shortcut item.
https://bugzilla.gnome.org/show_bug.cgi?id=706612
