When we switch into an invalid input source we hide the panel
indicator and return early but we were not hiding the previously
active source label and its menu item dot and thus when switching
again to a third input source we would end up showing 2 overlapping
labels in the panel and the menu would have 2 entries with a dot.
https://bugzilla.gnome.org/show_bug.cgi?id=695841
SwitcherPopup relies on being able to pushModal(), setting the stage
input mode to FULLSCREEN, and then doing regular event processing on
the actor it adds to uiGroup. But MessageTray uses GrabHelper which
sets up a 'captured-event' handler on the stage and thus gets all
events itself.
This, of course, breaks the switcher if it's brought up in the message
tray so, for now, we'll just prevent it from being used there.
https://bugzilla.gnome.org/show_bug.cgi?id=693907
NMClient recently got more heavyweight, with a property holding supported
connections. As fully initializing a NMObject is a recursive operation
and requires multiple DBus calls, switch to async initalization for NMClient
and NMRemoteSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=683288
LTE-only modems need to be treated as GSM/HSPA modems, as they all are 3GPP
modems and they all need the same kind of configuration (APN, user, password,
PIN...).
https://bugzilla.gnome.org/show_bug.cgi?id=688144
ModemManager >= 0.7 comes with a new DBus interface. This patch makes the shell
work with the new interface if the modem is detected as being exposed by the new
ModemManager (based on the device.udi string reported by NM).
https://bugzilla.gnome.org/show_bug.cgi?id=687359.
While we handle the case where ibus_bus_get_global_engine() returns
NULL, this case actually generates an exception we have to catch to
avoid some (harmless) console spam.
https://bugzilla.gnome.org/show_bug.cgi?id=692995
Some notifications, despite being emitted by shell code, should appear
to be from application or "separable" system components. Do that by
associating them with a notification-daemon policy.
Note that for this to look really good, empathy should rename itself
to Chat.
https://bugzilla.gnome.org/show_bug.cgi?id=685926
syncSectionTitle looks at device list for the section, to understand if
the section should be visible or not, so obviously it needs to see the
new device.
I wonder when this broke.
https://bugzilla.gnome.org/show_bug.cgi?id=692749
NM 0.9.7 is still not released even as a tarball, so fix this to work
with 0.9.6 again for now (although it doesn't do any device name
disambiguation in this case now).
https://bugzilla.gnome.org/show_bug.cgi?id=691720
If the setting is enabled, we record the last activated input source
for the currently focused window and switch to it when focusing back
that window. The Overview is considered a window for this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=691414
Calculate an icon based on our current state, not a mess of
signal emissions and callbacks. This is a preliminary basic
cleanup patch in preparation for the next one.
https://bugzilla.gnome.org/show_bug.cgi?id=690539
Instead of faking it by adding a bunch of main icons and secondary
icons to our own box, try and recreate the original button box
with the original icons.
https://bugzilla.gnome.org/show_bug.cgi?id=690589
Allow users to smoothly scroll on the volume indicator icon
to adjust the volume. Do this by simply passing the scroll
event to the slider inside the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=687573
If present, InfiniBand devices show up with the ethernet devices (and
the presence of an InfiniBand connection will cause "Wired" to be
renamed to "Ethernet").
https://bugzilla.gnome.org/show_bug.cgi?id=677150
Instead of storing them globally and having an hardcoded list of
engines which are allowed to change their indicator symbol when the
InputMode property changes.
https://bugzilla.gnome.org/show_bug.cgi?id=682318
Remove section titles for ethernet and mobile broadband, and replace
them with device status items that recognize if multiple devices are
installed in the same section, and if so automatically disambiguate.
https://bugzilla.gnome.org/show_bug.cgi?id=677142
Stop pretending that VPN is a NMDevice, and split the useful bits into
a NMConnectionBased interface.
Make each connection have its own switch menu item and handle its own
status, and remove the VPN section title, which is no longer needed.
https://bugzilla.gnome.org/show_bug.cgi?id=682929
Currently the visibility of input volume is only updated when a stream
is added/removed - apparently no one noticed until now, as in the normal
user session we get away with this as long as we have some startup sound,
but this is not the case in the lock screen, so we may end up showing
input volume incorrectly.
https://bugzilla.gnome.org/show_bug.cgi?id=684611
Due to the way the IBus API works we might get property changes while
the menu is already open. In that case the separator visibility logic
doesn't work since it only applies on menu open/close. This works
around that issue.
https://bugzilla.gnome.org/show_bug.cgi?id=682314
IBus has a properties API which are basically generic knobs into the
engine which are serialized and presented in a way that allows us to
easily build actionable UI elements with them.
Instead of implementing the whole generic system and accepting
everything coming out of the engines, for now, this patch just adds
support for a couple of important IBus Anthy properties.
https://bugzilla.gnome.org/show_bug.cgi?id=682314
The selector for insensitive popup menu items was wrong (a PopupMenuItem is
a ShellGenericContainer, not a StButton). Fixing it showed that previous
:insensitive tracking was manual for a reason: we have many items that are
not reactive, but don't want the insensitive styling (for example those in
the battery menu).
Fix it by adding a new style-class, popup-inactive-menu-item, that is added
to all new PopupMenuItems that are not activatable.
https://bugzilla.gnome.org/show_bug.cgi?id=683988
Previously we would only read the default sink and default source when
the connection to PulseAudio succeded. This worked because all VolumeMenu
users where initialized synchronously during shell load.
With the recent session mode changes though, the lock screen menu is
created on demand, and when it loads PA is already connected, so
it doesn't update the sliders.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Since we eventually want to add a system for changing the top panel
contents depending on the current state of the shell, let's use the
"session mode" feature for this, and add a mechanism for updating the
session mode at runtime. Add support for every key besides the two
functional keys, and make all the components update automatically when the
session mode is changed. Add a new lock-screen mode, and make the lock
screen change to this when locked.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Previously, when toggling a switch on we tried to replicate NM policy and
find a good connection to activate. This is broken in many situations.
Instead, only activate something when we can be sure it's what the user
wants (i.e. when there is only one connection, or when there is none,
and thus connecting will trigger the config dialog)
https://bugzilla.gnome.org/show_bug.cgi?id=683136
The design has a combined volume-network-power indicator in the lock
screen, which when opened shows a volume slider. Implement it by abstracting
the volume menu into a PopupMenuSection, and by creating three StIcons
bound to the real ones.
https://bugzilla.gnome.org/show_bug.cgi?id=682540
Don't log a warning if an unrecognized device type is seen.
Don't show slave connections in the menu. (Eg, don't show the
individual wired connections making up a bond, since they can't be
used individually.)
Make the icon only reflect the status of connections that are visible
in the menu. (ie, don't show the "connecting" icon when an
unrecognized connection type is connecting, and don't show a
"connected" status if the only active connections are of unrecognized
types.)
https://bugzilla.gnome.org/show_bug.cgi?id=682364
This is a temporary patch. The user menu button needs to move to
the left, and the a11y menu in some cases needs to be hidden outside
of the screen lock too.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
Track locked status and use it to provide a reduced version of
the panel in the locked screen. Accessibility, input sources and
volume menus are preserved, without the link to the control center.
Network, battery and user menu are reduced to pure indicators,
with no menu.
This is similar to the design but not exactly, because designers
in IRC said that network needs more analysis before exposing, and
because the design didn't account for a11y and IM (so the one menu
metaphor is not really appropriate).
https://bugzilla.gnome.org/show_bug.cgi?id=619955
We connect to the IBus daemon asyncronously and use it to query info
about input sources of the type 'ibus'. In case the daemon is or
becomes unreachable we just skip showing input sources of this type.
https://bugzilla.gnome.org/show_bug.cgi?id=641531
Wifi and mobile broadband have signal indicators and are thus
more useful than vpn icons in the panel. Therefore, in the case
we have both wifi/3g and VPN we prefer the former as the "primary
icon" and add a lock next to it.
Behavior when VPN is added to wired or other connections is still
preserved: the wired icon is replaced by vpn.
https://bugzilla.gnome.org/show_bug.cgi?id=672591
Sorting by strength is what the other OSes do by default, and it
provides a better UX (by offering your hotspot and router before
the one from your neighbor).
https://bugzilla.gnome.org/show_bug.cgi?id=658946
Refactor NMDeviceVPN to be more like the other NMDevices, including
having a valid getSectionTitle() and emitting signals when the
underlying connection changes state.
Use the existing notification infrastructure to hook these signals
to actual notifications (including some code consolidation).
https://bugzilla.gnome.org/show_bug.cgi?id=676330
Ensure that the UI is updated when a connection changes name or id,
even if it was already known by a device.
Also, use less private properties on NMConnection objects, as they
can become stale and cause problems.
https://bugzilla.gnome.org/show_bug.cgi?id=677097
Rather than accessing global.session_type / global.session_mode
all over the place, delegate mode information to a dedicated
sessionMode object. While not very useful for now, we will replace
checks for a particular mode with checks for particular properties
that sessionMode defines based on global.session_mode.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Bluetooth PINs are required to have 6 digits, so enforce that
condition by making the PIN request notification's confirm
button insensitive unless the entered PIN has the correct length.
https://bugzilla.gnome.org/show_bug.cgi?id=651251
For most subclasses, this is a direct swap -- a lot of the time, the
constructor was a blank class that override createNotificationIcon,
and called _setSummaryIcon in _init.
https://bugzilla.gnome.org/show_bug.cgi?id=661236
We seem to have a lot of code that does something along the lines of:
if (condition)
actor.show();
else
actor.hide();
ClutterActor already has such a thing for exactly this purpose: the 'visible'
property. Use it instead of the mess above.
https://bugzilla.gnome.org/show_bug.cgi?id=672272
nm_active_connection_get_devices() has a (questionable) special case
for the no devices case (which happens if the DBus object is
destroyed because NM went down): it returns null instead of an empty
array. Handle that instead of crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=673043
gnome-settings-daemon commit 07b1ed63016 removed the custom 'Changed'
DBus signal in favor of the standard 'PropertiesChanged' signal, so
use that instead to update the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=667371
Previously the code in _accessPointAdded was iterating over the
the network list to find a good place, and at that time, added both
the network to the list and the item to the menu. When I refactored
to call queueCreateSection, I forgot to add code to insert the
network in the list.
Add it now, using the new Util.insertSorted function.
https://bugzilla.gnome.org/show_bug.cgi?id=666429
By using Main.queueDeferredWork, we can ensure that most of the
menu contents (in particular, the heaviest parts like the list of
wifi networks) are not updated immediately as we receive signals
from NetworkManager. Instead, the menu is rebuilt some time later,
or as soon as the user opens the menu.
This means that it is no longer needed to optimize for the
access-point-added case, replacing a lot of buggy code with a safer
call to _queueCreateSection, which in turn should ensure that the
more menu, if existing, is always at the end and that at most 5 networks
are visible outside it.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
When wifi or wwan are blocked by hardware killswitch, we should not
allow changing the switch (it won't work anyway), and show
"hardware disabled" instead, similar to what we already do in the
bluetooth menu.
https://bugzilla.gnome.org/show_bug.cgi?id=665194
When placing networks in _createSection, we were taking in
consideration that _activeNetwork is always first, by adding 1,
but then kept this offset also for networks following it (normally,
all of them, since _activeNetwork is also the most recently used),
that instead should not be affected by the movement.
This resulted in the menu showing 4 networks + More... instead of
5.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
The last patch in the sequence. Every place that was previously
setting prototype has been ported to Lang.Class, to make code more
concise and allow for better toString().
https://bugzilla.gnome.org/show_bug.cgi?id=664436
All classes that have at least one other derived class (and thus
benefit from the framework) have been now ported. These includes
NMDevice, SearchProvider, AltTab.SwitcherList, and some other
stuff around.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
Third step in the class framework port, now it's the turn of
MessageTray.Source and MessageTray.Notification, as well as
the various implementations around the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
The Lang module in gjs has recently gained a small yet powerful
Class framework, that should help improve the readability of code
when using complex inheritance.
This commit starts porting shell code, by rewriting all classes in
popupMenu.js (and all derived classes) to Lang.Class.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
The option was merge with 'visual-bell-type' with the GSettings
port, but the change turned out too disruptive for the universal
access menu / settings panel, so gsettings-desktop-schemas commit
a5819b2a4e9 re-added the separate option.
This continues the series of patches for GDBus porting, affecting
all code that accesses remote DBus objects. This includes modemManager,
automount, autorun (for the hotplug sniffer), calendar, network (for
nm-applet only), power, scripting (for perf monitor interface)
https://bugzilla.gnome.org/show_bug.cgi?id=648651
When changing _findNetwork with _findExistingNetwork, I changed
the return value to avoid searching twice for the access point,
and changed some names. I forgot to update all points where those
names were used.
https://bugzilla.gnome.org/show_bug.cgi?id=663278
Previously, we connected to notify::strength only if there was
already a signal connected, and the AP changed (thus, by induction,
we never connected). As a result, the icon became stale and different
from that shown inside the menu (which is correctly updated).
https://bugzilla.gnome.org/show_bug.cgi?id=650007
PopupMenu.firstMenuItem returns a PopupMenuItem, not an apObj. We
need to retrive the latter using the _apObj property.
Also, somehow the property from the number of elements in a menu
was changed from .length to .numMenuItems, and this broke the
destruction of the menu upon emptying it.
https://bugzilla.gnome.org/show_bug.cgi?id=659277
Calling nm_access_point_get_ssid() in the handler of the
access-point-removed signal can result in DBus request, which will
then fail because the object was already removed at the server side.
Instead, use a difference function to retrieve the access point
object (the network), that compares directly by object identity.
https://bugzilla.gnome.org/show_bug.cgi?id=651378
js2-mode is no longer developed and we recommend js-mode these days,
so switch the modelines to specify that, and make them consistent
across all files.
https://bugzilla.gnome.org/show_bug.cgi?id=660358
Devices are represented as susdut, not susbut (i.e. the percentage
is a double rather than a boolean) - apparently the wrong signature
works, but correct it anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=660122
When the active AP disappears, it is possible to receive the
"access-point-removed" signal before the "notify::active-ap" (as
dbus-glib + libnm-glib property notifications are not reliable).
In that case, we would remove the AP from the network object, thus
an attempt to update the UI would create an item for an empty
network.
https://bugzilla.gnome.org/show_bug.cgi?id=658150
Current code is sometime attempting to create menu items for wifi
networks that have no visible AP. I have no idea why this is
happening, but it should fix the symptoms and avoid exceptions.
https://bugzilla.gnome.org/show_bug.cgi?id=658150
The keyboard status item doesn't derive from SystemStatusButton, since
it doesn't use an icon. But this meant it wasn't getting the right
class name, and so was using the full-width menu title highlight
rather than the small one. Fix that.
It does not make a great amount of sense to have this function
on the login screen. And worse, it does not work, since the greeter
is currently a modal dialog, so interaction with the opening
window is impossible.
https://bugzilla.gnome.org/show_bug.cgi?id=659164
