Right now we have two booleans that specify when user verification
is happening and when it succeeded, respectively.
This commit consolidates them into one AuthPromptStatus enumeration.
This clean up will allow us to check for verification failure more
easily.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
The only time we ever call _reset directly is when
detecting changes to disable-user-list. We can implicitly
trigger a reset for this case, just as easily by calling
this._authPrompt.reset()
This commit makes that change for consistency and to make
it easier to adjust the authprompt workflow later.
https://bugzilla.gnome.org/show_bug.cgi?id=683437
When we shift workspaces to create a blank one for a window or
application, all of the window actors are shifted down. However, some
of these window actors are transient windows attached to a main window.
When these windows are moved to a different workspace, the main window
is moved along with it. When the main window is moved, these windows
are also moved. This creates a double move of the windows.
This double movement leads to unexpected results where workspaces are
collapsed and windows are in incorrect positions.
This patch prevents movement of these transient windows, only grabbing
the main (ancestor) windows to move to a different workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=705174
Right now the whole authPrompt spreads out if a PAM message
comes in that longer than the entry.
This commit changes it to wrap instead, by forcing the
auth prompt to be a fixed width (slightly bigger than
the entry width was sized to previously).
https://bugzilla.gnome.org/show_bug.cgi?id=705037
Remove the Wi-Fi chooser from the menu and put it in a dialog instead.
This frees up the submenu to simply have three items: an rfkill toggle,
a button to show the dialog, and a button to show network settings.
Ideally, we'd autodetect the "needs network" case by user initiation
and automatically show the dialog if needed, but lower-level plumbing
is neccessary, so the menu item to show the dialog is an acceptable
compromise instead.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Since the network section of the aggregate menu will be shown in the lock
screen, we need to ensure that users can't tweak with network settings or
anything like that.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Replace NMNetworkMenuItem with NMConnectionItem, based on
NMVPNConnectionItem, and replace NMDevice with NMConnectionSection
and NMConnectionDevice.
Since this rips apart NMDevice, and since wi-fi should not be
connection-based, we'll temporarily remove NMDeviceWireless. We'll
add it back in a later commit, along with the new Wi-Fi dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
Instead, just add them after they're constructed. This allows us to
not have to pass the connections to each device, and prevents issues
with having to enumerate the connections in the middle of construction.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
Note that this does have an interesting side effect of not showing
network connectivity status on wired. This is intentional, and error
states will still be shown in the top bar when they happen.
This also means that if you're connected to both wired and wireless,
even though wired is the default route, we'll first notice the wireless
active connection, and we'll show that in the top bar. New NM API that
will help figuring out the active connection of the default device is
being implemented to stop this from happening.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
The code is complicated by requiring overflow, and in order to incrementally
improve the code to match the designs, remove overflow.
In the new design, we'll have a fixed number of menu items, and Wi-Fi
will be done by a separate design, so we can't be too concerned with
the menu not fitting on the screen.
This is a part of the new system status design, see
https://wiki.gnome.org/GnomeShell/Design/Guidelines/SystemStatus/
for design details.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
According to Dan Williams, if firmware is installed the device
will disappear and reappear, and this is unlikely to change any
time soon. Just make our lives easier by removing the tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
I intended to make a few code cleanups, but I apparently forgot
to hook up _updateAccessPoint. Merge it with _activeApChanged,
which is where the notify::active-access-point signal is actually
hooked up to.
https://bugzilla.gnome.org/show_bug.cgi?id=704670
As we only reload search providers on startup or when the sort order changes,
and given the small number of search providers we'll actually load, I doubt
we'll see any speed decrease.
The simplicity of synchronous code is also much clearer, and fully avoids
all the possible bugs about in-flight requests or similar.
This also prevents issues with multiple search providers showing up at once,
which happen when multiple requests to reload search providers get called
immediately, with the existing in-flight async requests never cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=700283
When we reload the remote search providers, we currently try to remove
all remote providers, and then re-scan. It turns out that we sometimes
remove the wrong providers from the remote provider list, causing us to
have some providers not correctly unloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=700283
When a ShellUserVerifier is asked to verify a user at the login
screen it will transparently first try to reauthenticate the user
against an existing session and then fall back to logging a user
into a new session. The former is used for user switching.
It's useful to know which type of verification is happening, so
the next button can be made to say "Unlock" instead of "Sign In" when
a user is already signed in.
This commit exports a new "reauthenticating" property on the
ShellUserVerifier that the auth prompt checks when deciding which
label to use for its next button.
https://bugzilla.gnome.org/show_bug.cgi?id=704795
If there are no messages in the queue and a user starts to
type then we can safely hide the message label since the
user has probably already read it.
This fixes a weirdness where "Incorrect Password" messages stay
around, even as the user types in the new correct password.
https://bugzilla.gnome.org/show_bug.cgi?id=704817
Similar to our ClutterContainer monkey-patching, we can add some
convenience to existing ClutterLayoutManagers:
- hookup_style() to bind layoutManager properties to CSS properties
- child_set() to set child properties
https://bugzilla.gnome.org/show_bug.cgi?id=703905
Jasper removed the ShellGlobal:stage-input-mode property after its
"last" use was removed. Adapt the (hopefully) really last use of the
property to the recent input changes.
https://bugzilla.gnome.org/show_bug.cgi?id=704095
There's quite a bit of duplicated code between the login dialog
and the unlock dialog dealing with the various signals from the
ShellUserVerifier.
This commit moves that duplicated code into the AuthPrompt.
https://bugzilla.gnome.org/show_bug.cgi?id=704707
The point of fading the icon is to make the text displayed over the
icon more legible. In RTL layouts, the text is displayed on the left
of the icon, so fading the right-hand-side of the icon doesn't work
well.
https://bugzilla.gnome.org/show_bug.cgi?id=704583
This is a regression from splitting the slider out that never got fixed.
Restore the previous (useful) behavior by adding a public API to the
slider that lets us pass an event through.
https://bugzilla.gnome.org/show_bug.cgi?id=704368
We've long had the hasWorkspaces property, but it doesn't seem like
it was ever used. Implement it so that we don't have workspaces in
initial-setup mode.
Since it's difficult to make it change at runtime with a decent set
of semantics, and we never expect that to happen, don't bother
implementing it dynamically.
https://bugzilla.gnome.org/show_bug.cgi?id=698593
commit ea02380c15 made the login
screen stop using ModalDialog. It makes sense for the unlock
code to also stop using ModalDialog, too (for similar reasons).
Now that the login screen's auth prompt code has been separated
out, the unlock dialog can use it to get the buttons and spinners
etc, that it was previously getting from ModalDialog.
This commit drops the ModalDialog usage in the unlock dialog, and
makes the unlock dialog use GdmUtil.AuthPrompt instead.
https://bugzilla.gnome.org/show_bug.cgi?id=702308
Right now there is a lot of duplicated code between the unlock
dialog and the login dialog.
This commit moves the login dialog's auth prompt to a separate
class, so that it can (in a subsequent commit) be used by the
unlock dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=702308
A bug got introduced when moving the login dialog away from modal
dialog, such that it listens for escape key presses in a mouse
event handler instead of a keyboard event handler.
This commit fixes that code to correctly listen for key-press-event
instead of button-press-event.
https://bugzilla.gnome.org/show_bug.cgi?id=702308
Right now if disable-user-list is true we show it briefly, just so
that we can fade it out to the user entry.
This commit avoids the fade in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=704471
Right now when a user types their password to unlock their session
we end up getting an unlock signal from GDM right away. We then
proceed to deactivate the screensaver before the user has a chance
to read his messages.
This commit makes sure we clear out the message queue before processing
the deactivation request.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
logind sends out an "unlock" signal separately when
verification completes and we already listen for that,
so we don't need to unlock on verification-complete, too.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
this._clearMessageQueue() is a noop when this.hasPendingMessages is
false so calling it in that case doesn't make sense.
This commit drops that call.
https://bugzilla.gnome.org/show_bug.cgi?id=704347
Add an option to limit the appSwitcher to the current workspace. For users
that use workspaces for task separation this more convient then current
behviour. While having to add an option is unfortunate there is no way to make
both groups happy as workspaces usage differes between different users / types
of users.
https://bugzilla.gnome.org/show_bug.cgi?id=703538
We need to make sure that we reset the opened submenu when we close the
submenu, not trick the toplevel into thinking a closed submenu is the
currently opened menu.
https://bugzilla.gnome.org/show_bug.cgi?id=704336
This way, if a parent is insensitive, all children will be, too.
Though PopupSubMenus will be forced closed, PopupMenuSection needs
the propagation.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
Doing it at the end has confusing semantics, especially as there is
this point where isOpen is true, but the corresponding open-state-changed
has not been emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
Use ClutterActor.allocate_align_fill() so we don't have to do
this math ourselves. At the same time, clean up the RTL handling
so that it's easier to follow.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
It seems this behavior at one time was intentional, but I (along with
the designers) think it looks ugly having the menu having its insides
shrinking and shifting around while fading out of existence.
There's two cases where we currently explicitly try to animate the
submenu closed -- when an item is clicked inside the submenu, and
when the toplevel closes. This removes both of those.
The user expectation is that submenus will be closed the next time the
toplevel is open even if they were open before, so force submenus closed
when the toplevel finishes fading out, without any animation.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
As the aggregate menu will be built out of sections from each
of the menus, we need to ensure that activating an item in one
of these sections can close the main menu, even when it is not
a menu item. The new API also needs to be flexible enough to
ensure that animations can be controlled, like the buttons that
lock the screen or launch a new session.
Port the user menu to use this new API as well.
https://bugzilla.gnome.org/show_bug.cgi?id=702539
Now that we preallocate space for the prompt message there is
a lot of loose space between the entry and the buttons.
This commit helps tighten things up by getting rid
of the large top padding set above the login buttons.
https://bugzilla.gnome.org/show_bug.cgi?id=702308
A PanelMenuButton added to the top bar might not be visible at all
times. If it is hidden while the corresponding menu is open, we
currently don't do anything at all, e.g. the menu remains open
pointing to an arbitrary location in the top bar.
Instead, close the menu automatically in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=703540
The event catcher that covers the entire primary monitor during
transitions is currently inside a BoxLayout, relying in its
odd support for fixed position actors.
We already have a proper stack widget in place, move it there.
https://bugzilla.gnome.org/show_bug.cgi?id=703808
Currently lookingGlass relies on some odd BoxLayout behavior, which
allows children to use fixed positioning without affecting the parent's
size request. As this behavior is scheduled for removal, add the
looking glass dialog directly to Main.uiGroup.
https://bugzilla.gnome.org/show_bug.cgi?id=703808
commit ea02380c15 changed the login
dialog to not use ModalDialog anymore. There's still one lingering
setInitialKeyFocus method call in the source, which will cause an
exception to be thrown when users have their user list disabled.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=703874
The duality of the Clutter's key focus and mutter's window focus has long been
a problem for us in lots of case, and caused us to create large and complicated
hacks to get around the issue, including GrabHelper's focus grab model.
Instead of doing this, tie basic focus management into the core of gnome-shell,
instead of requiring complex "application-level" management to get it done
right.
Do this by making sure that only one of an actor or window can be focused at
the same time, and apply the appropriate logic to drop one or the other,
reactively.
Modals are considered a special case, as we grab all keyboard events, but at
the X level, the client window still has focus. Make sure to not do any input
synchronization when we have a modal.
At the same time, remove the FOCUSED input mode, as it's no longer necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
We can easily implement much of the same behavior ourselves by
keeping track of Clutter's focus events. Reintroduce heavily
modified FocusGrabber to do the work for us.
This will temporarily break when the user selects a window until
we can make gnome-shell automatically set the stage focus.
This also removes our only use of focus grabs, so remove those
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
We can't assume "isActive implies isModal", so there is a risk
of pushing a modal that nothing else will ever pop, because we
take the early return and don't activate the user active watch.
https://bugzilla.gnome.org/show_bug.cgi?id=700901
_updateIcon should not attempt to sync any active connections, as the
icon-changed signal can be emitted in response to something done during
_syncActiveConnection. In the case of VPN, removeActiveConnection would
cause an icon-changed signal to be emitted immediately, but the state
would not be updated, causing us to call removeActiveConnection over and
over.
Explicitly sync all active connections when we know it needs to be done,
and simply make _updateIcon synchronize with the current device's icon.
https://bugzilla.gnome.org/show_bug.cgi?id=703565
This fixes a blue background being drawn when switching the monitors
configuration using hardware keys
(clone/multimonitor/external/internal).
The problem is that the shell gather all background loading requests
under the same meta_background_load_file_async call using one
GCancellable (the first one to come). So when the shell receives a
batch of 12 or so XRandr events, it creates 12 new background managers
which end up trying to load 12 times the same background picture. All
of these requests are batched into the same
meta_background_load_file_async using the first GCancellable received
on the first request. Unfortunately, when the first request is
cancelled by the following event indicating a new monitor setup, all
of the background picture requests are dropped on the floor, and
nothing gets loaded (hence the blue screen background).
https://bugzilla.gnome.org/show_bug.cgi?id=703001
It turns out that picking a 3200x1200 scene on notebook chipsets
every time the mouse is moved isn't exactly the fastest thing. Defer
picking to an idle to ensure that it won't get in the way of keeping
up with mouse events.
https://bugzilla.gnome.org/show_bug.cgi?id=703443
The code that checks for various conditions is confusing and
undercommented. It appears one of the recent refactorings
inadvertedly inverted the sense of the 'hidden mountpoint'
check, and caused autorun to not work for anything that does
not have a 'native root' - which is pretty much all volumes
implemented by gvfs.
https://bugzilla.gnome.org/show_bug.cgi?id=703418
Commit d6cace32 introduced a typo in the left/right arrow side
calculation code that causes in most scenarios (where the monitor
width is greater then the height) to not flip the box when it doesn't
fit inside the monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=703403
If the drag action ends after something else has put the screen shield
into a different state we can end up in an inconsistent screen shield
state where the whole thing is empty.
https://bugzilla.gnome.org/show_bug.cgi?id=703126
There are some issues with the existing session menu. First, it looks
kinda bad. It seems like it's hanging around there, but it doesn't really know
what to do with itself.
Second, when it expands down it requires that the buttons below move
down with it. This kind of movement is awkward and looks a bit weird.
Third, its current position makes the "dialog" tall and unwieldy when
you add things like messages for fingerprint readers or authentication errors.
This commit moves the session list to a menu behind a button to address
the above problems.
Based on a patch by Jasper St. Pierre.
https://bugzilla.gnome.org/show_bug.cgi?id=702818
Commit 16fa186b63 attempted to fix the zoom animation problem
by throwing changes on the floor while the overview is animating. This has
the side effect that we might end up missing some positioning changes causes
windows to overlap the workspace thumbnails.
So revert those changes and fix it by simply by passing
WindowPositionFlags.ANIMATE during the overview animation.
This way the animation works as expected and we don't miss any position changes.
https://bugzilla.gnome.org/show_bug.cgi?id=703105
Right now, there's a weird flicker at start up where the
Not Listed? button shows up before the user list, which looks
pretty bad if you're watching for it.
This commit fixes that problem by hiding the Not Listed button
initially and showing it at the appropriate time.
https://bugzilla.gnome.org/show_bug.cgi?id=703132
The top_window_group was introduced for popup windows that should
appear above system chrome, but as the group itself is just a child
of Main.uiGroup, chrome that is added after top_window_group will
still be stacked on top.
At least correct the stacking for actors added via addChrome().
https://bugzilla.gnome.org/show_bug.cgi?id=702338
The login screen is no longer even remotely dialog-like, so
using ModalDialog is pretty weird. It also makes it difficult
to put the session list in the same place as the spinner.
This commit moves loginDialog away from using modal dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=702818
The class is generally useful, so it only makes sense in panel.js
for historical reasons. Because other parts of the code are
using it, though, problems are cropping up that require a
workaround like:
placeSpinner: function(...) {
/* This is here because of recursive imports */
const Panel = imports.ui.panel;
Panel.AnimatedIcon(spinnerIcon, WORK_SPINNER_ICON_SIZE);
...
}
This commit moves AnimatedIcon to its own file so we can drop that
workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=702818
When the osd window is hidden based on the timeout, it accidentally
left the timeout ID in place. When a subsequent switcher popup came
up, it thought the OSD window was scheduled to be hidden and tried
to re-hide the actor. This caused the tween to be run along with
an extra call to enable_unredirect_for_screen.
When the allocation of the workspacesView changes during the animation we override
the tween with one that does not animate causing the overview zoom animation
not to happen.
Fix that by ignoring the alloactionChanged notification during the overview
animation.
The code here before was trying to play hierarchy tricks to
figure out how to show / hide the events list, which broke
when we rearranged how the date menu was laid out. Simplify
the code here to not be so tricky, and update the CSS to
match the new designs.
https://bugzilla.gnome.org/show_bug.cgi?id=702849
The timestamp timeout specifies how long we should wait before
adding a timestamp to the notification. A timeout of one minute
ended up showing a lot of timestamps, so increase it to 3 minutes.
https://bugzilla.gnome.org/show_bug.cgi?id=687809
If we focus notifications before they're expanded, the body and action
area won't be visible, and the can_focus members like the text entry
will not be able to be focused.
Ensure that all of the all actors that would be in an expanded notification
are visible before we attempt to focus them.
https://bugzilla.gnome.org/show_bug.cgi?id=698778
Migration from old settings can result in a path instead of URI
there. This is technically invalid, but can easily recognize it
and avoid the crash.
Minor changes by Ray Strode
https://bugzilla.gnome.org/show_bug.cgi?id=702121
The status item will go away soon, so make sure the one-time
fire is given its own function. At the same time, only connect
to the signal when the situation actually matters.
https://bugzilla.gnome.org/show_bug.cgi?id=701954
No class in here has this.carrier as a property. Presumably, this was
meant to be this.device.carrier, but since this code is going to be
rewritten soon anyway, might as well just junk the never-working
code for now.
https://bugzilla.gnome.org/show_bug.cgi?id=701954
In order to have event descriptions on multiple lines, but still
maintain proper alignment with the day and time strings, refactor
the whole event list to be one big table. Headers are implemented
as spanning cells, and uneven spacing is a mix of row/column spacing
and cell padding.
https://bugzilla.gnome.org/show_bug.cgi?id=701231
In BlueZ 4, Authorize() was used to authorize both service
and JustWorks authorization requests. In BlueZ 5 these two
have been split into AuthorizeService() for services and
RequestAuthorization for JustWorks devices. Adapt the
Bluetooth code accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=700891
This can be more easily achieved by listening for changes to the
device's active-connection property. VPN will still need support to
track active connections, as it does not have an associated
device. But as VPN can track multiple active connections, the names
"set" and "clear" don't quite fit. Rename them to the more-standard
"add" and "remove".
https://bugzilla.gnome.org/show_bug.cgi?id=701954
The end session dialog was waiting a second before updating
its text to display the timer. It is nicer to show the correct
message from the start.
https://bugzilla.gnome.org/show_bug.cgi?id=702056
We currently monitor the shell's override schema for changes to
the 'dynamic-workspaces' key, which ends up being the wrong
schema in classic mode. With the new ability to use mode-specific
overides, we can finally fix this.
https://bugzilla.gnome.org/show_bug.cgi?id=701717
This will allow the use of mode-specific defaults. For classic mode
we currently implement this with mini-extensions, but this may result
in confusing behavior when settings change due to extensions being
disabled during screen locks (not to mention that those mini-extensions
are hardly an elegant approach).
https://bugzilla.gnome.org/show_bug.cgi?id=701717
We will allow to use mode-specific overrides; in preparation for that,
move the code so that we only override preferences after initializing
the session mode.
https://bugzilla.gnome.org/show_bug.cgi?id=701717
As multiple-connections for a Wi-Fi AP won't fit in the new design,
remove submenus right now. Simply make a simple item that connects
to the first known connection for the AP, which should be the common
case.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
Currently we "only" grab the keyboard when starting a drag operation,
which does not impede keybindings to be processed. This is at best
not harmful (like workspace switching), but may have unintended effects
otherwise - for instance, the hot corner is disabled, so having the
corresponding keyboard shortcut still active is fairly odd (not to
mention that it leaves the system in a confused state).
Fix this by switching to pushModal()/popModal(), which will push a
dedicated keybinding mode for us.
https://bugzilla.gnome.org/show_bug.cgi?id=700877
Currently the clipboard's contents may leak to unauthorized parties by
pasting into the unlock dialog's password entry and unmasking the entry.
Prevent this from happening by clearing the clipboard on lock.
https://bugzilla.gnome.org/show_bug.cgi?id=698922
When the dash does not contain any applications (either favorites
or running), it is currently impossable to add a favorite via DND.
Grow the dash slightly in that case to provide a drop target.
https://bugzilla.gnome.org/show_bug.cgi?id=684618
We currently only keep track of old placeholders when moving past
the dragged app's current favorite position, as this is the only
case where we need to worry about jitter. Still, moving it into
_clearDragPlaceholder() allows us to consolidate code paths, which
is a good thing ...
https://bugzilla.gnome.org/show_bug.cgi?id=684618
The function currently only resets the placeholder position if
there is a placeholder; this is not necessarily true, as the
placeholder may be reset outside _clearDragPlaceholder().
If this happens, the placeholder will temporarily stop working
for the "old" position (and permanently if it's the only position).
Just reset the position unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=684618
Before, the text of those buttons were truncated when the text exceeded
the fixed width we had in the CSS.
Now, we give more horizontal space to the control buttons to match
the maximum text length of all buttons.
https://bugzilla.gnome.org/show_bug.cgi?id=696307
Now that we control our own destiny, I noticed that getResultsToDisplay
is the only user of this._notDisplayedResult, and it's called immediately
after setResults, which is the only thing that sets it. Just remove the
stateness entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
Since the provider icon only appears in the list results, it makes
sense for that to be stored with the results class, rather than outside,
triggered by which sort of display it is.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
It turns out that this focus code broke sometime in the 3.6 cycle --
when updating results, the focus is always on the text entry, so this
never gets called. We'll eventually replace it with something that
keeps track of the focused result meta, but for now, remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
While this is a very simple translation right now, soon enough it will
be so that it will have a less crazy "public" API and can do things like
cache result metas.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
Since the two paths that call this want to keep the actor in two different
states, it makes sense to just call the one function that's the same between
both individually.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
Right now, this doesn't give us very much, since IconGrid and StBoxLayout
have different APIs. But since we want to introduce result caching, it
makes to reduce the duplication we already have so we don't need to add
the code to do so in both places.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
pushResults, and the original async search API, were originally intended
so search results that weren't immediate could be added as they come in.
Since then, we've decided that the design of search results is that they
should finish at once with all results. Thus, the code was modified so
that pushResults always overwrote the current result set. As such, it makes
sense to rename the method so that the name matches the behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=693836
Commit d0310bd745 blindly replaced global.overlay_group with
Main.layout.overviewGroup, but unlike the former, the latter is
hidden while the overview is not active, which makes it unsuitable
for the message tray's light box. In fact, with the removal of
global.overlay_group, there is no longer a container which may
be used both inside and outside the overview, so we can either
recreate the lightbox each time we show/hide the overview, or
use different lightboxes altogether; this opts for the latter.
https://bugzilla.gnome.org/show_bug.cgi?id=701097
This is a singleton object inside libibus which means that if we
destroy it (e.g. because ibus-daemon got restarted) then, other
library users, like the ibus gtk+ IM module that we also use
in-process, will break.
https://bugzilla.gnome.org/show_bug.cgi?id=699189
Currently we simply set the gsettings key when activating an input
source. This obviously introduces a time window, between the event that
activates the switch and when the switch is complete, under which key
events are being delivered to applications and interpreted according
to the previous input source.
The patches in bug 696996 introduce a DBus API in g-s-d that allows us
to know when an input source if effectively active. Using that and
freezing keyboard events in the X server until we hear back from g-s-d
we can ensure that events won't be misinterpreted after an input
source switch.
https://bugzilla.gnome.org/show_bug.cgi?id=697007
Passkey is the proper name to be used when we are pairing with a Bluetooth
2.1+ device. PIN are only used for older devices which is not the case
here, the message is only shown when dealing with 2.1+ devices.
https://bugzilla.gnome.org/show_bug.cgi?id=697661
Meta laters are invoked in reverse order of registration, so
having multiple laters propagating the geometry cause all but the
first one in the frame (which is usually wrong) to be ignored.
Instead, queue at most one later call, and use the last set geometry
in the callback.
https://bugzilla.gnome.org/show_bug.cgi?id=700853
In order to make sure that the struts and regions are initialized,
we need to make sure that we do with the conditions that nothing
is transformed, like the uiGroup, and that everything is visible.
These invariants broke during a fix to hide the UI until the
system background texture could be loaded. Now, reorder things so
that the system background is loaded, and then the UI is properly
loaded, and so on.
https://bugzilla.gnome.org/show_bug.cgi?id=696159
While the default style works well will a solid handle, using both
border and fill color would be desirable in classic mode. Add the
necessary (optional) style properties to allow this.
https://bugzilla.gnome.org/show_bug.cgi?id=697917
Instead of using the input mode, when the overview is not modal
it should use a Chrome-tracked actor, that is added to the input
region. Because the overview always takes pointer input when
visible, the actor is added at startup, and it is shown and hidden
as needed.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
If we are passed an invalid file template, ShellRecorder.record()
will return a %NULL filename; as the Screencast DBus interface
expects a string return value, we cannot return the value unmodified
in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=700842
Variable names like "sourceNotificationStackDoneShowing" are too
long, and too undescriptive: this one points to a source, not a
notification stack that has been done showing.
As the close button of folder popups overlaps at the top, it ends
up being cut off if the folder is located at the very top of the
view. Fix this glitch by taking the button's overlap into account
in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=694371
We already take care of growing the view if open folders overlap
at the bottom, however folder popups may still end up being cut
off when opening above the source icon - if the popup is high enough,
its y coordinate will be negative and therefore outside the parent's
allocation. To fix, we can either make sure that folders pop up below
their source icon in that case, or adjust the parent grid's position
as necessary while a folder is open. This implements the latter.
https://bugzilla.gnome.org/show_bug.cgi?id=694371
If the view doesn't fill the available space, content should still
start at the top rather than the center - not least the positioning
code for folder popups assumes that, so set the appropriate expand
flags.
https://bugzilla.gnome.org/show_bug.cgi?id=694371
The main overview actor was made reactive to catch scroll-events
and propagate them; after some code shuffling, the actor that
catches scroll events ended up not being the same actor that's
supposed to propagate this, which broke using the scroll wheel
to switch workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=700595
Currently we show the workspace popup for relative targets ("up", "down"),
but not when targetting a specific workspace directly.
There is not really a good reason for that difference, and as we are about
to introduce a new shortcut to target the last workspace (which does vary
with dynamic workspaces), it makes sense to unify the behavior and always
show the switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=659288
Currently we stop monitoring application usage when disabling the
'enable-app-monitoring' setting, but we still expose previously
gathered data in the app picker's frequent view. This is not what
users should expect, so hide the view in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=699714
Some keyboard spot a dedicated search key, which gnome-settings-daemon
currently handles by spawning gnome-search-tool. It makes a lot of
sense to promote the Shell's integrated search feature instead, so
expose an appropriate DBus method g-s-d can use.
https://bugzilla.gnome.org/show_bug.cgi?id=700536
This is technically a smidge slower due to the constant bisect insert,
but since this should only happen when we make a Wi-Fi dialog, it's
insignificant.
https://bugzilla.gnome.org/show_bug.cgi?id=700322
Commit 2499f2ed80 went back to using shell_app_activate() for
selecting an app, which favors windows on the current workspace;
this is the behavior we want for instance when activating a
launcher, but it's wrong for the alt-tab list - explicitly
request the first (e.g. MRU) window in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=700356
Since commit c84dc6254d, popup menus are closed automatically
when another menu opens (to catch the case where a menu is opened
by keyboard shortcut, which wasn't handled before). However in the
case of child menus, both child and parent are expected to be visible,
so handle this case explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=699678
Wrap new GtkMenuTracker API that adds an easy way to bind to
tracker items, and use it to add back support for submenus.
This also adds support for a submenu feature that we didn't
have support for before, action namespaces.
https://bugzilla.gnome.org/show_bug.cgi?id=700257
This pulls in new upstream API that Ryan will maintain, removing
code on our side.
Currently, our implementation of submenus will be gone, but this
will be fixed in a few commits.
https://bugzilla.gnome.org/show_bug.cgi?id=700257
When opening an application folder, it should take key focus to
allow for keynav; also, Escape closing both folder and app picker
is unexpected, it should only close the popup.
https://bugzilla.gnome.org/show_bug.cgi?id=695314
The point of a hash table is that you don't need to list all the
elements. To avoid that, keep a "clearableCount" in MessageTray,
which can be used by the message tray menu to show and hide the
clear item, and that is updated in constant time when sources
are added or removed.
https://bugzilla.gnome.org/show_bug.cgi?id=700194
Upon popMode, MessageTray will try readding all notifications
to their rightful parent, so we must tell NotificationBox to
relinquish them before st_bin_set_child() fails (leaving a dangling
child pointer and crashing at the next allocation)
https://bugzilla.gnome.org/show_bug.cgi?id=698812
Like screenshots, the screen recorder can be a useful tool in other cases
than being triggered by a keyboard shortcut. To account for that, export
a Screencast DBus API similar to the existing Screenshot interface.
https://bugzilla.gnome.org/show_bug.cgi?id=696247
Our built-in screen recorder is implemented as a component, so it will
just be disabled when the session mode doesn't allow screencasting.
However we will expose screencasting functionality on DBus as well, and
while it makes sense to restrict its availablity to the same modes as
the existing recorder, exporting/unexporting the service depending on
the session mode is not very consumer friendly.
For that reason, add an additional 'allowScreencast' property that for now
mirrors the availability of the 'recorder' component.
https://bugzilla.gnome.org/show_bug.cgi?id=696247
There is not always a clear distinction between code and style,
which is why the interface ends up being mostly unusable when we
end up without *any* style, for instance because the specified
application-stylesheet is corrupt.
Setting the default stylesheet in addition to the application-stylesheet
is no guarantee for non-default themes not messing up the interface, but
it should at least lower the risk ...
https://bugzilla.gnome.org/show_bug.cgi?id=700097
Metacity's Ctrl+Alt+Tab would include X11 windows
with hints like GDK_WINDOW_TYPE_HINT_DOCK and
GDK_WINDOW_TYPE_HINT_DESKTOP (there are more conditions, but that's a
good start). If we're in normal mode, those are visible and it's OK
to display those in the Ctrl+Alt+Tab order, but if we're in the lock
screen or the unlock dialog, they're not visible and it doesn't make
sense to focus them.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=699862
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Florian Müllner <fmuellner@gnome.org>
Some callers of the keyring prompt keep the dialog up while
processing the prompt. Allow the user to cancel the prompt
while in this state.
This is propagated to the caller, who can cancel the operation
in question when this occurs.
https://bugzilla.gnome.org/show_bug.cgi?id=682830
Only ACTIVE or ACTIVATING connections are important when deciding
what icon to show, don't fallback on any, possibly invalid or deactivating,
active connection object.
https://bugzilla.gnome.org/show_bug.cgi?id=676285
Commit e98eb57e3e added flags to expand the dialog's background
stack, which works fine with the current clutter-1.16 branch, but
breaks on clutter-1.14 (as shipped with GNOME 3.8).
Using an St.Widget with a Clutter.BinLayout fixes this, and is more
modern Clutter usage.
https://bugzilla.gnome.org/show_bug.cgi?id=699877
The popup currently has a fixed size based on monitor size. As a result,
the popup's content may overflow if its minimum size is larger than the
popup size. To prevent this, use min-width/min-height for the popup size
so that the popup can grow if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=696523
The optional logo on the login screen is currently shown in the
top bar, which is not only a rather unprominent position, it also
gives the wrong suggestion of a clickable element.
Newer designs call for the logo to be shown horizontally centered
at the bottom of the screen, so implement that instead.
https://bugzilla.gnome.org/show_bug.cgi?id=694912
Currently a system modal dialog's actor hierarchy depends on whether
events should be blocked while the dialog is shown or not. Change
it to always contain a stack, to allow subclasses to add additional
background elements.
https://bugzilla.gnome.org/show_bug.cgi?id=694912
The date actors get destroyed and recreated on every date change which drops
key focus for the selected date. Restore key focus in such a case, but only
when the selected date was actually clicked. Whenever the next/prev month
buttons code is used (for scrolling, mouse click, or keyboard click), have
the corresponding button grab focus. Changing months currently causes the
calendar to update twice as the eventSource gets changed, so key focus gets
lost if it is on a date when the month changes.
https://bugzilla.gnome.org/show_bug.cgi?id=667434
The nautilus icon sticks out pretty badly among the symbolic
icons we use for other desktop components. This commit finds
windows of type DESKTOP, and uses the video-display-symbolic
icon for them.
https://bugzilla.gnome.org/show_bug.cgi?id=697914
Before the fix, the message tray highlighted all urls containing "://", even
invalid ones. This change fixes this by have the message tray highlight only
the urls with http, https, ftp schemes.
Credit goes to: Phuong Vu, Liye Fu, Monica Chelliah, Owen Taylor
https://bugzilla.gnome.org/show_bug.cgi?id=661225
Since we now have global.screen::in-fullscreen-changed, remove the
duplicate signal. To prevent ordering problems in connecting to
this signal, make inFullscreen a property-function of a new Monitor
object rather than a data property we tack on to a Rectangle object.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
If we created a workspace after showing the view, we would never
set the geometry on it, which would cause an exception in the
window layout code and leave the DND state tracking in an undefined
state.
https://bugzilla.gnome.org/show_bug.cgi?id=699029
We put these "access point objects" in "this._networks" and
"this._activeNetwork", so let's rename it. This also makes
the fact that each "access point object" can contain multiple
access points a tiny bit less confusing.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
NM is now a lot smarter about dealing with automatic connections, so just
create an empty connection and pass it to it. The only places where NM
requires connection settings is where we require explicit setup: Bluetooth
DUN, WPA-Enterprise and WWAN/VPN. These cases are already handled by
gnome-control-center, where complex configuration is handled, so remove
the automatic connection management for now and just let NM handle it.
https://bugzilla.gnome.org/show_bug.cgi?id=698918
We already do this when navigating between menus via mouse or
keynav, but miss cases where a menu is opened by other means,
for instance via a keyboard shortcut.
https://bugzilla.gnome.org/show_bug.cgi?id=686756
It makes sense to allow closing the app menu with the same shortcut
that is used to open it, so make it a toggle action and allow it
TOPBAR_POPUP mode.
https://bugzilla.gnome.org/show_bug.cgi?id=686756
Currently all keybindings are disabled while some popup menu is open.
However some keybindings may still be useful in some cases, so expose
GrabHelper's modal params parameter to allow specifying a keybinding
mode for particular menus.
https://bugzilla.gnome.org/show_bug.cgi?id=698938
Eval() is expected to return a boolean success value and a string result.
However when the function is disabled (via the development-tools setting),
we return null for the latter which is not a valid string value.
Return an empty string instead.
https://bugzilla.gnome.org/show_bug.cgi?id=698959
Since [1], GIO supports generic serialization and deserialization of a
GIcon into a GVariant. This is also implemented by GdkPixbuf and could be
used instead of our homegrown code for it.
This commit adds support to another 'icon' key in the metas dictionary
returned by applications for it. The previous 'gicon' and 'icon-data'
keys are still parsed and supported as before, but are now deprecated.
[1]
https://git.gnome.org/browse/glib/commit/?id=c16f914b40c749b938490a4e10a3c54ec1855c42https://bugzilla.gnome.org/show_bug.cgi?id=698761
StLabel doesn't like that we set its properties after destructions,
and this would happen in currentInputSourceChanged() at the end,
when setting the ornament.
As the context menu and notification boxpointer can only appear if we already
take a modal grab, grabFocus will have problematic results if the focus does
somehow change.
https://bugzilla.gnome.org/show_bug.cgi?id=698483
This simplifies the code required to build remote menus and
put all the items in the right place, and makes us share our
implementation with GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=698427
This makes it easy to replace the dot with another label in the future.
Change the allocation logic, as text layout is more complicated than
simple icon logic.
https://bugzilla.gnome.org/show_bug.cgi?id=698427
If windows are removed or added, we shouldn't keep the old layout, as it's
not valid anymore. If windows are removed, this is especially bad, as the
rows contain references to the removed window objects, causing crashes.
https://bugzilla.gnome.org/show_bug.cgi?id=698622
Instead of applying an additional scale factor to all the rows in the
layout, only do it for those rows that don't fit.
This avoids the visual distraction of resizing a row when there's no
need to.
Instead of doing an entire recalculation of window positions when
sliding the thumbnails box, simply recalculate the position and scale
with basic aspect ratio math. This also ensures that windows won't
miraculously swap positions, even if we reposition windows while the
thumbnails box is expanded.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Split out the part that moves the window clones around from
the part that calculates the window clone positions, and rename
both methods so that the overall meaning is more clear.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Repositioning will eventually be separated from recalculation
to accomodate two different geometries, so we'll need to do
the padding and area manipulation in two different areas.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
As we want to eventually track two geometries, we need to rename
our very plain "_x, _y, _width, _height". While we could just prefix
them, I think that stuffing them in an object makes more sense.
At the same time, make the variable and method name more descriptive
by adding such a prefix, as well as a bit of documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
To ensure that we don't recalculate window layouts when zooming
in or out, we need to always pass the full geometry. This will
break window repositioning when we zoom back in; for the purposes
of commit clarity, this breaks this feature for now. It will be
added back soon.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Filter out all applications which have the NoDisplay, Hidden or
Not/OnlyShowIn bits, as those are not meant to be launched directly.
This also allows the user to filter apps from the frequent view
using alacarte.
https://bugzilla.gnome.org/show_bug.cgi?id=696949
If for some reason an extension needs to destroy the AppMenu object,
currently it is not possible to do this cleanly due to these signals
remaining connected.
https://bugzilla.gnome.org/show_bug.cgi?id=698531
This was saved so that doing something which called relayout
but only changed the area rectangle would simply be needed to
recompute window scaling parameters. With the new overview
relayout, the flow control changed, it turns out that the
current layout is always cleared. Remove this for now, and we'll
put in a different strategy for this.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Instead of creating a bunch of random actors and then passing
them off to the controls manager, let the controls manager
construct them. This leaves the controls manager in charge
of the ordeal.
https://bugzilla.gnome.org/show_bug.cgi?id=694469
Putting the notification actor in the tray actor has caused a lot
of various bugs and glitches over the years related to syncing the
two, fizzling out events, and so on. It's a much simpler model if
we consider the notification actor and tray to be separate widgets.
As a side effect, this makes the context menu not pop up when we
right-click on notifications.
https://bugzilla.gnome.org/show_bug.cgi?id=695800
This does nothing while the tray is active, so it doesn't make sense
to track it on the tray. This also makes the code a lot easier to read,
with notification behavior being labeled "notification" rather than
"tray".
https://bugzilla.gnome.org/show_bug.cgi?id=695800
With sticky keys, users should be able to press and release a
modifier and then press a key to activate a modifier-key combination.
Activating the overview on the Super key release keeps these
users from using keyboard shortcuts involving the Super modifier.
The solution implemented here is to simply disable the Super-release
binding if sticky keys are enabled. It is still possible to go
to the overview by using Super-S or Alt-F1.
https://bugzilla.gnome.org/show_bug.cgi?id=685974
This is a new, regular keybinding for going to the overview.
The default binding is Super-S, which goes well with Super-A
for going to the application grid.
This is separate from the existing panel-main-menu keybinding,
so that we can keep Alt-F1 opening the main menu in classic mode.
https://bugzilla.gnome.org/show_bug.cgi?id=698251
In order to use a different spinner image in classic mode (or any
other mode specific style), get it from CSS rather than hardcoding
a particular image.
https://bugzilla.gnome.org/show_bug.cgi?id=693688
For classic mode, we want to use a different styling for the spinner,
so we will pick up the image filename from CSS to make use of mode
specific styling. As the CSS will give us a full pathname, adapt the
API to take a full pathname instead of building it inside AnimatedIcon
from the passed basename.
https://bugzilla.gnome.org/show_bug.cgi?id=693688
GrabHelper already takes care of putting the key focus back on the
widget that had it when the grab was established.
ShellEntry's close() has recently become harmful since it's now called
from the menu's destroy() method and that is called in the entry's
destroy handler which means that this._entry might no longer be valid
at close() time.
https://bugzilla.gnome.org/show_bug.cgi?id=697560
The actor is the same as the drag actor in this case, but we tend to
set properties on the drag actor and get them from the actor elsewhere
in this codepath. Make this consistent.
https://bugzilla.gnome.org/show_bug.cgi?id=697504
It turns out that we never destroyed modal dialogs when closing
them, causing them to still linger in the scene graph even when
there were no references to them in the JS. The one case where
we don't want to destroy modal dialogs after being closed is
endSessionDialog, so provide a parameter that allows classes
to override this behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=697295
We chain up on _finish() to drop the grab and destroy the switcher
popup but we should activate the target window first because dropping
the grab results in the previously focused windows getting a focus in
event immediately followed by the focus out event from the target
window activation which we can easily avoid.
https://bugzilla.gnome.org/show_bug.cgi?id=696259
This ensures that when we have windows that are already visible,
like desktop icons, they don't fly across the screen from what
seems to be hyperspace to get into view.
https://bugzilla.gnome.org/show_bug.cgi?id=696323
if a slideshow file has a really large duration we'll currently
throw an exception.
This bug is aggravated by the fact that some versions of
gnome-desktop use UINT_MAX as a sentinel value to mean,
"don't ever update slide".
This commit treats durations that would overflow as infinitely
long.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
If a background gets requested from the cache while it's still
being loaded from an earlier call, then there will be two concurrent
loads of the same file.
That concurrency is mitigates the effectiveness of the cache and
also causes leaks.
This commit consolidates file loads so that concurrency doesn't
happen.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
Right now we only destroy the bgManager object when the
workspaceThumbnail is explicitly destroy with its destroy()
method.
This commit makes sure bgManager gets destroyed when the
workspaceThumbnail actor is destroyed without calling
destroy().
https://bugzilla.gnome.org/show_bug.cgi?id=696157
BackgroundManager connects to the changed signal in
the backgrounds it manages.
The signal ids for the changed signal connectionss are stored
as state on the background manager object.
If the background being managed changes while the manager
is still loading the old background, then the signal id
variable can get out of sync with the background object being
managed.
This commit ties the signal id to the background objects themselves,
so there is no opportunity for them to desynchronize.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
Normally backgrounds get evicted from the cache when their actor is
destroyed. If the actor changes content without destroying itself,
though, we should evict the old content from the cache, too.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
We currently only add the first instance of a background
to the cache. This means if the actor associated with that
background is destroyed, the content will be evicted and
it will need to get reloaded, even if it's already loaded
on another actor.
This commit ensures every content gets added to the cache.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
In the (no barriers) fallback case handleDragOver has somehow
ended up being turned into a nop and thus breaking xdnd
overview opening.
Fix that by calling _toggleOverview() when a xdnd source triggers
it.
https://bugzilla.gnome.org/show_bug.cgi?id=696447
When commit 724a2bd7 changed the way to determine the default
calendar app, it dropped all special handling of evolution.
Unfortunately we still need it to not end up with the default
mail component, so add it back.
https://bugzilla.gnome.org/show_bug.cgi?id=696432
Currently, if a button-press event results in releasing the last modal
grab (e.g. clicks outside the grabbed actors), we don't consider the
event handled and allow its emission to continue. If we consider
dismissing a grab as an action of its own, any additional action
triggered by the same event becomes an unexpected side effect.
Tweak the capture handler accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=696422
There is no reason why there shouldn't be a battery icon in initial-setup,
knowing how much battery you have left is useful in during setup as well.
This also fixes an exception in the lock screen caused by the combined icon
not finding the battery one.
https://bugzilla.gnome.org/show_bug.cgi?id=696212
There's large performance issues with both the blur and desaturation
that make the screen shield hard to use on slower computers, and this
has always been a temporary stopgap until the user can pick a different
image for the lock screen.
https://bugzilla.gnome.org/show_bug.cgi?id=696322
Right now, if multiple messages come in, they just sort of
clobber each other.
This commit sets up a message queue, and introduces pauses
long enough for the user to hopefully be able to read those
messages.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
GDM sends a reset signal after verification succeeds
so that a user-switched login screen can prepare for
the next time it's going to be used.
The unlock screen treats resets as failures, though.
This means, on success, we're emitting "failed" and
clearing any last second messages.
This commit changes the unlock code to ignore resets from
GDM after successful verification.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
Right, the common code between the login screen and
the unlock screen handles clearing the user verifier
when GDM sends a reset.
We don't actually always want to clear the messages on
reset in the unlock case, though, so doing it implicitly
is problematic.
This commit moves the clear() call from the common code
to the specific reset handlers.
https://bugzilla.gnome.org/show_bug.cgi?id=694688
Since we drop our event handler, we won't see ever the release event
from the button press, so unset the flag so it doesn't muck with the
next time somebody takes a grab.
https://bugzilla.gnome.org/show_bug.cgi?id=696102
Getting fullscreen window tracking right in GNOME Shell turned out to
be very hard, because it depended on details both how Mutter handled
fullscreen windows and the exact timing of that. Fullscreen tracking
and auto-minimization of fullscreen windows that lose their fullscreen
status has thus been implemented in Mutter: use that.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
Previously when a client requests that a window should be docked the
shell would reparent the socket window onto the stage's window and
then use ClutterX11TexturePixmap to get a texture to represent the
window. This will not work if Clutter is no longer using the X11
winsys for example if it becomes its own display server. Instead this
patch leaves the socket window as a child of the root window and lets
mutter create a MetaWindow out of it. If Mutter is acting as a display
server then this mechanism will still work via the headless x server.
The ShellGtkEmbed instance now registers for notification of the
‘window-created’ signal of the display so that it can find the
MetaWindow that gets created to represent the socket window. When this
window is found it is prevented from being displayed on the screen by
setting the actor's opacity to 0. An input shape is then set on the
window to prevent it receiving any input.
Instead of being a subclass of ClutterX11TexturePixmap, ShellGtkEmbed
is now a subclass of ClutterClone. When the MetaWindow is found for
the socket window the clone's source is set to the invisible actor for
the window so it can be displayed in the panel as before.
The ShellEmbeddedWindow no longer needs to know what the stage is
because it no longer reparents the socket window. Therefore the
ShellTrayManager doesn't need to know the stage either so
shell_tray_manager_manage_stage has been replaced with just
shell_tray_manager_manage_screen.
https://bugzilla.gnome.org/show_bug.cgi?id=693438
To create a new workspace by dropping on the placeholder, we move all
the windows down one workspace and then wait for _checkWorkspaces() to
automatically create the empty one at the end.
This means that, from the implementation POV, the new workspace is not
the one created by DND but it's the last one, and this detail was exposed
in the UI because the animation was applied on that one.
Fix that by starting the animation manually from the DND code, and then
blocking the animation from happening when the new workspace is created
with a flag.
https://bugzilla.gnome.org/show_bug.cgi?id=685285
DND of windows has a lot of side effects, including the possibility of
current workspace disappering from under our feet. We need to account
for that when trying to activate it.
https://bugzilla.gnome.org/show_bug.cgi?id=685285
This happens in the case of Workspace/WorkspaceThumbnail: they call
meta_window_change_workspace_by_index(), which fires window-removed
on the old workspace, thus destroying the window clone.
https://bugzilla.gnome.org/show_bug.cgi?id=685285
Windows can be restacked at any time, including when the stackAbove
property of the window clone is being dragged, and thus parented to
the uiGroup. To do stacking properly, we need to skip it for the duration
of the drag, and sync it again at the end (which is already done by
mutter because of the workspace change)
https://bugzilla.gnome.org/show_bug.cgi?id=685285
ClutterBinLayout uses the maximum width/height of all children in
size requests and positions children according to the expand/align
properties. This means that the vertical position of folder popups
is not considered in size requests, so if the main view is smaller
than a folder popup's height and offset, the popup will be truncated
and/or mispositioned. Fix those cases by using a custom LayoutManager
that behaves like ClutterFixedLayout for height requests and like
ClutterBinLayout otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=694371
We need to look at the duration of the current step of the slideshow
to determine when to next queue an event, rather than the full slideshow
duration.
https://bugzilla.gnome.org/show_bug.cgi?id=695882
Due to weird and strange JS scoping semantics, if we are in a
callback, "i" won't be captured and when the callback is called,
we'll have the wrong index, causing addImage to be called instead
of updateImage.
https://bugzilla.gnome.org/show_bug.cgi?id=695882
The pattern is underneath, so we need to add one. It turns out
that ClutterGroup doesn't care about that, but we need to do this
to remove deprecations in mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=695882
To make sure that the screen shield is shown before suspending, we
take a logind inhibitor and release it when the screen shield is
shown. As the screen shield is not only shown on suspend, we can end
up releasing the inhibitor independently from suspending (lock, idle),
in which case the screen might not be locked when we do suspend.
To fix, only release the inhibitor after showing the screen shield
when we are about to suspend.
https://bugzilla.gnome.org/show_bug.cgi?id=693708
Since commit 7cdb75e7ce, initializing UI is deferred until the session
mode has been loaded. However DBus is still initialized immediately,
which means that for DBus methods that access properties in Main, there
is now a window between the method being exposed on the bus and the
method being ready to be called. At least g-s-d grabbing global keybindings
is likely to fall in this window on session startup, and almost guaranteed
when regrabbing bindings after a shell restart.
To fix, defer initializing DBus as well.
https://bugzilla.gnome.org/show_bug.cgi?id=694321
When we switch into an invalid input source we hide the panel
indicator and return early but we were not hiding the previously
active source label and its menu item dot and thus when switching
again to a third input source we would end up showing 2 overlapping
labels in the panel and the menu would have 2 entries with a dot.
https://bugzilla.gnome.org/show_bug.cgi?id=695841
It's possible in some corner cases for the status of the topwindow
to change and make it not fullscreen without ::restacked being
changed. One way that it could happen with the old code was if the
layer of the top window changed from NORMAL to FULLSCREEN.
Change the logic not to look at the layer, which is a function of
Mutter's *intended* stacking, rather than the *actual* stacking,
which is what ::restacked gives you. Instead, look at the top
portion of the stack, down to the first non-override-redirect
window, and see if their are any monitor-sized windows there.
Connect to changes on the top portion of the stack, so we know
if conditions change.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
We always add external DOCK windows to the ctrl-alt-tab switcher,
e.g. separate dock applications or nautilus' desktop windows.
Since commit 1f46a0dc26, all items in the switcher are expected
to set a proxy parameter, but the aforementioned code was not
updated accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=695395
* Prompters have state, and cancelling an already prompter will
cause prompts that are in progress to fail.
* In addition allow replacement of our shell prompter for debugging
purposes.
https://bugzilla.gnome.org/show_bug.cgi?id=695485
notify::* doesn't guarantee that the value has changed, only that it
may have been. We need to ensure that we track the old value to make sure
we don't do things like overwrite timeouts if they already exist.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
Now that the tray is modal, the summary is tied to the tray,
and we don't need to have separate states for the tray and
summary. This also removes the nearly invisible opacity tween
on the summary items when opening the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
The only way that locking happens is with when the summary box
pointer is active. As it can only happen if the summary state
is active, it's impossible for a notification to be expired,
or the summary to be hidden while it's showing.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
It makes more sense to use the monitor the tray is on, rather than the
primary monitor. This also matches us with whether we can open the tray
from a barrier/dwell or not.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
We may release the focus grab at any time, so it's not guaranteed
we'll be in event processing. In particular, hovering over and out
of a notification will cause this to happen, as the notification
is hidden on a timeout.
https://bugzilla.gnome.org/show_bug.cgi?id=695659
For the same reasons that we disable the tray barrier, we should
disable hot corners as well -- when users have a full-screen game
open, we shouldn't allow overview activation by the hotcorner.
https://bugzilla.gnome.org/show_bug.cgi?id=694997
gnome-panel is going away in 3.8, so we can't rely on it to provide our
friendly and reliable companion. But no regret, because we can ship it
ourselves, and at the same time remove some unnecessary configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=695526
Launching the run dialog to open the looking glass or something
like that shouldn't install a bunch of file monitors that monitor
every IO change to the home and system directories.
Instead, simply scan all the paths when trying to complete.
https://bugzilla.gnome.org/show_bug.cgi?id=695338
With fallback mode gone, we can no longer rely on gnome-screensaver
being installed. Rather than handling three different cases (GDM,
gnome-screensaver, no lock), disable the lock functionality when
not running under GDM.
https://bugzilla.gnome.org/show_bug.cgi?id=693403
With fallback mode dropped, we can no longer rely on gnome-screensaver
to be installed, so we'll have cases where we are unable to lock the
screen. The user menu should not show the "Lock" item in this case,
but as UnlockDialog includes UserMenu, we cannot use the existing check
without creating a circular dependency; move the function to a more
generic place to fix.
https://bugzilla.gnome.org/show_bug.cgi?id=693403
We currently resync the stacking order of the two key frames
every iteration of the animation. This is costly and unnecessary.
This commit ensures they're stacked properly up front and doesn't
touch them after that.
https://bugzilla.gnome.org/show_bug.cgi?id=694993
Rather than expose a dizzying array of methods related to managing
state that require infecting every user of the overview methods, try
to do the sensible and smart thing internally. Now, the overview
itself tracks when XDND drags start, and simply calling show, hide or
toggle while an XDnD drag is in effect will show the overview, and
will only take the grab until after the XDND drag ends.
https://bugzilla.gnome.org/show_bug.cgi?id=663661
We currently call the session updated handler as soon as
the session modes are read. This handler sets up keybindings
for leaving the overview (if a user session) and shows the
login dialog (if a gdm session).
We can't do the latter until the stage is mapped because it
takes a grab, and we don't need to do the former until the
user goes into the overview.
This commit defers processing session updates until the
the layout manager says start up is prepared.
It fixes a race condition at login screen startup now that
we don't show the stage right away.
https://bugzilla.gnome.org/show_bug.cgi?id=694321
This cleans up the code considerably, and makes it so that
one path creates all hot corners for all monitors. Why this
wasn't done originally, I have no clue...
The one complication is debouncing if the button and hot corner
are triggered in rapid succession, so we just move this tracking
to the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=663661
For the HotCorner, we want to have different logic for tossing out
specific events based on the grabbed state, etc. so make us have
to pass in an event filter callback.
For the hot corner case, we want to have the pressure apply both in
and outside of the overview, so we need to move this to the user. At
the same time, use keybinding mode math that's more like what's used
in filterKeybinding.
While it may seem like an abuse of the KeyBindingMode API, it may
become more reasonable if one thinks of the pressure barrier as a
binding of sorts, just applied to the mouse. If a ButtonBinding API
was added to mutter, I think we'd use the existing KeyBindingMode
infastructure there as well.
Ensure that the pointer leaves the barrier before we trigger again.
For the message tray case, this doesn't matter much, as the trigger
won't have any effect after the grab is taken, but in the overview
HotCorner case, this ensures that we don't trigger the overview
transition many times simply by holding pressure against the hot
corner, which is easy to do accidentally.
Instead of sometimes having an event source and sometimes not, use
the empty event source when the session mode says the calendar is
disabled. This way, the code can assume an event source object and
avoid checks.
https://bugzilla.gnome.org/show_bug.cgi?id=641383
Check if the event source is currently doing an async call, and prevent
UI updates in that case. This avoids a flash of "No updates" when switching
months.
https://bugzilla.gnome.org/show_bug.cgi?id=641383
SwitcherPopup relies on being able to pushModal(), setting the stage
input mode to FULLSCREEN, and then doing regular event processing on
the actor it adds to uiGroup. But MessageTray uses GrabHelper which
sets up a 'captured-event' handler on the stage and thus gets all
events itself.
This, of course, breaks the switcher if it's brought up in the message
tray so, for now, we'll just prevent it from being used there.
https://bugzilla.gnome.org/show_bug.cgi?id=693907
Toggling the overview during the startup animation reportedly
causes stuck grab and other odd behavior.
There's no reason to handle toggling the overview during this
time anyway.
This commit defers that handling until after startup.
https://bugzilla.gnome.org/show_bug.cgi?id=694837
Curently it is possible to copy the content of password entries,
and paste it elsewhere in clear text. This is undesirable, so
follow GTK+'s behavior and disable the copy action for password
entries.
https://bugzilla.gnome.org/show_bug.cgi?id=695104
We always leave the workspace switcher zoomed out when we can assume
that the user is actually making use of workspaces. For the default
dynamic workspace behavior, we make this assumption when more than
two workspaces are in use (e.g. at least two workspaces contain windows
plus an empty one at the end). However this test does not make sense
when using static workspaces - in that case, not using workspaces
would be indicated by a workspace number of 1 (in which case the
entire switcher is hidden completely), so add a check for dynamic
workspaces to the condition.
https://bugzilla.gnome.org/show_bug.cgi?id=695126
Currently both the app switcher and the thumbnail list divide items
first into two groups (based on whether the item is located on the
current workspace or not), and then sort each group individually
by MRU.
The resulting behavior is often confusing, e.g. when using alt-tab
a second time does not switch back to the original window when the first
invocation involved a workspace switch and the workspace contains
windows of more than one application.
Instead, make the behavior more predictable by sorting both lists
strictly by MRU.
https://bugzilla.gnome.org/show_bug.cgi?id=661156
Shell modal dialogs can take their action on a certain key's
key-release-event. For example on <enter> the affirmative action is
usually run.
Make sure that the key was also pressed on the dialog and we're not
seeing a spurious key-release-event from a key that was pressed before
the dialog was displayed.
https://bugzilla.gnome.org/show_bug.cgi?id=692937
It is possible that a session survives after closing, if any processes
(usually PulseAudio and GConf) are still alive at the end. In that case,
ignore it, as the user is already logged out and there is nothing to lose.
https://bugzilla.gnome.org/show_bug.cgi?id=695002
Implement a basic OSD popup that shows an icon and optionally a label
and a fill level. It is based on the existing OSD implementation in
gnome-settings-daemon, which it will replace.
https://bugzilla.gnome.org/show_bug.cgi?id=613543
Right now we take a still frame of the desktop before showing the
start up animation. This gives us an animation over what was
there before startup.
That's not actually desirable when restarting the shell. We don't
want to animate over undecorated windows, we really want to animate
over the noise texture.
This commit drops the still frames in favor of the noise texture.
https://bugzilla.gnome.org/show_bug.cgi?id=694326
Previously, the overview BoxLayout was sized and positioned explicitly
using the primary monitor coordinates, as its parent was at 0,0 and
with a fixed layout manager. Now we use a bin layout, so we need to
position and size the stack actor, and set the overview boxlayout to
expand.
Take also the occasion to use a MonitorConstraint instead of handling
position and size manually.
https://bugzilla.gnome.org/show_bug.cgi?id=694969
We used to clip the overview group to prevent the dash from sliding into
neighbor monitors, but now it moved to the groupStack, so we must move
the clip too.
https://bugzilla.gnome.org/show_bug.cgi?id=694970
This filters out resident and transient notifications in the normal
case, but just returns the number of unread messages for the Telepathy
implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=687787
We generally want view content centered, in particular where the
view itself is symmetrical. So move the dash to a separate layer
and use a placeholder to account for its size when showing the
window picker, which is the only view where it doesn't make sense
to center the content.
https://bugzilla.gnome.org/show_bug.cgi?id=694261
Commit 43ed66cf26 changed the toplevel overview actor, so it
makes sense to change the show/hide transitions to use that instead
of the existing group, to avoid elements layered on top of the
group being excluded from the transitions.
Windows can sometimes be focused, or appear to be focused, without being
at the exact top of the stack, for example in the case of override-redirect
windows, or with attached modal dialogs. In that case, we should not
try to minimize them (as it creates a loop that makes it impossible to restore
the window)
https://bugzilla.gnome.org/show_bug.cgi?id=694905
Mutter now makes session registration an explicit required
step. This is so we can tell the session manager when
we're ready to move on to the next phase.
This commit calls the new Meta.register_with_session() api after we're
initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=694876
"description" is documented as a valid field for search result metas,
and ListSearchResults implements it, so pass it down to be used.
Also, don't wrap the description in quotes, so that the search provider
can decide if it is an excerpt from the searched text or something else.
And to that extent, set use_markup to true, so that terms can be
highlighted.
https://bugzilla.gnome.org/show_bug.cgi?id=694906
This can happen if you open two or three terminal windows, and then
open the overview -- they're not centered. The issue is that because
of the WINDOW_CLONE_MAXIMUM_SCALE clamping, the scale that is being
laid out is different from the scale that the layout was calculated
for.
Implement and document a hack-ish solution which simply keeps the
scale for the layout as originally calculated, but centers the
windows inside the cell.
https://bugzilla.gnome.org/show_bug.cgi?id=694902
Multiplication is linear, so we can split this out as a separate
component. This will make it easier to think of it as an additional
per-window scaling factor, rather than tweaking the scale a bit,
which is more correct to the model.
https://bugzilla.gnome.org/show_bug.cgi?id=694902
While we won't tear down the entire strategy infrastructure, we want to
rework some layout code in the future, so just tear this piece out for
now.
https://bugzilla.gnome.org/show_bug.cgi?id=694902
gnome-shell-extension-prefs supports opening a specific extension's
preferences directly from the command line by passing the UUID.
However this broke when extension loading was changed to be processed
asynchronously, as no extension has been loaded when the command
line argument is processed. Fix by deferring opening the extension's
preferences until all extensions have been loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=694858
Some of the conditions for showing the user list were not
properly inverted, causing the session list to be hidden
when it shouldn't be and shown when it shouldn't be.
https://bugzilla.gnome.org/show_bug.cgi?id=694784
As a special-case to the "cap event" rules, this allows a heavy swipe
from top to bottom to allow triggering the tray without having to push
into it.
https://bugzilla.gnome.org/show_bug.cgi?id=694467
When pressing against the bottom of the screen, we shouldn't
really take more than 15px from each event, to prevent spruious
mouse movements from opening the barrier.
https://bugzilla.gnome.org/show_bug.cgi?id=694467
gnome-settings-daemon will be changed to override the XSetting in
the case where we're on a remote display rather than overwriting a
user setting, so we need to look at the XSetting here.
https://bugzilla.gnome.org/show_bug.cgi?id=694320
Previously, we would create one StBin per monitor, but each was positioned
at 0,0 and sized as the screen, so they would overlap and draw the box shadows
on top of the other backgrounds.
Instead, we need to size appropriately the bin, and then we need to position
the actual MetaBacgroundActor at 0,0, so add a flag to BackgroundManager
for this.
Also, get rid of MetaBackgroundGroup, they do nothing because the screenshield
is not a descendant of the MetaWindowGroup and because the widget in between
blocks the propagation of the visible region. At the same time, use a
widget, not a bin, because StBin requires you to set .child, not call add_child().
https://bugzilla.gnome.org/show_bug.cgi?id=694394
We recently started to trim leading and trailing whitespace from
the search string, and not to trigger a search when the resulting
string was empty. However we still allow whitespace to trigger
type-ahead-find, so that the key focus is moved briefly to the
search entry and back to the stage, resulting in a disruptive
flickering of the entry.
Fix this by excluding whitespace from triggering type-ahead-find.
https://bugzilla.gnome.org/show_bug.cgi?id=694475
xdndHandler used to wait for the stage to show up before calling
global.init_xdnd() . Since commit 65303d027a xdndHandler is initalized
later so the stage might be already visible at this point causing the
show signal never to be emitted and thus global.init_xdnd will never
be called.
Fix that by checking by calling global.init_xdnd without waiting for
the stage's show signal to be emitted, as the stage is guaranted to be
visible at this point.
The key was removed from gsettings-desktop-schemas, GNOME should
always draw a background: the key existed to support xsetroot, but
we no longer read the _XROOTPMAP_ID.
https://bugzilla.gnome.org/show_bug.cgi?id=694463
If the AllView is scrolled, the vertical scrollbar will take away
some horizontal space on one side, resulting in the content ending
up slightly off-center.
Account for this by using overlay-scrollbars instead.
https://bugzilla.gnome.org/show_bug.cgi?id=694261
The frequent view should not be scrolled, but to work around the
icon grid overflowing, we used a (non-scrolling) scroll view anyway.
Now that IconGrid:fillParent allows us to avoid overflow, we can
remove this hack.
https://bugzilla.gnome.org/show_bug.cgi?id=694256
We sometimes map the stage before we've loaded a background on it
because of a race asynchronously loading the session mode.
This manifests as the startup animating starting over a white
background.
This commit defers showing the stage until after the still frames
are loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=694321
It is useful at times to perform several actions that would usually
close the overview (for instance launching an application) at once.
Currently we allow this by dragging items to a workspace rather than
just clicking it, but it's an odd metaphor with its own set of
problems.
Introduce an alternative approach (inspired by file selection in
file managers) by keeping the overview open if a Control key is
held down.
https://bugzilla.gnome.org/show_bug.cgi?id=686984
When the user clicks on "View Source" or "Web Page" in the "Extensions" tab of
looking glass, the callback _onViewSource() or _onWebPage() is called and they
try to close looking glass: this._lookingGlass.close();
But it does not work and generate the exception "this._lookingGlass is
undefined". This patch fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=693814
animateIn and animateOut should not reset the scale, otherwise
extra animate calls (which are possible because the diff algorithm
in _redisplay is not optimal) cause unneeded movement.
Therefore, create new items hidden, and have the creator call
animateIn or set the scale/opacity properties manually.
adjustIconSize must be changed to always set the icon size temporarily,
otherwise the first time it computes the icon size with 0 scale.
https://bugzilla.gnome.org/show_bug.cgi?id=690643
The DashActor will known to allocate the show apps button only if the
icon size is (temporarily) too big for the containing box, therefore
it should request just that as the minimum size.
This solves a glitch that happened when removing a favorite and at the
same time causing the dash to expand.
https://bugzilla.gnome.org/show_bug.cgi?id=690643
Using the scroll wheel in the window picker should switch workspaces.
As the picker doesn't have a visible boundary though, it makes sense
to accept scroll-event for the entire overview area. Rather than
making the overview's main actor public, expose scroll-events via
a signal.
https://bugzilla.gnome.org/show_bug.cgi?id=686639
Using the scroll wheel to switch workspaces makes sense, but it is
currently only supported on the workspace switcher, as it conflicts
with window zooming in the picker.
As changing workspaces is far more useful than the zoom feature,
remove the latter in order to "free" the scroll wheel for workspace
switching.
https://bugzilla.gnome.org/show_bug.cgi?id=686639
Right now if a user logs out, they are thrown to the login screen
imediately, without even seeing the dialog close.
This commit fades the dialog out before processing the logout.
https://bugzilla.gnome.org/show_bug.cgi?id=694296
Opening and closing a modal dialog is not instant. There
is a transition animation involved. When the dialog is
finished opening, it currently emits the "opened" signal.
When it's finished closing, however, it doesn't emit a
"closed" signal. This means, there's not a good way to
know when the dialog finishes closing.
This commit adds the "closed" signal.
https://bugzilla.gnome.org/show_bug.cgi?id=694296
Modal dialogs take an optional timestamp in their close method.
If the timestamp is not passed in, then global.get_current_time()
is used.
Some callers of the close method pass in global.get_current_time()
unnecessarly (since it's the default).
This commit drops the argument for those cases.
https://bugzilla.gnome.org/show_bug.cgi?id=694296
And reverse menu order in order to avoid it reading "Change Background… Settings"
"System Settings" shouldn't be used because it's not used to mean the control-center in any other place.
https://bugzilla.gnome.org/show_bug.cgi?id=694290
We disable the entry after a user answers a question while we
process it, but we don't reactivate it later if asked another
one.
This commit makes sure the entry is always reactive when we
are waiting for an answer from the user.
https://bugzilla.gnome.org/show_bug.cgi?id=691806
When a swipe scroll completes, we scroll the active workspace into
view. This works fine if the gesture is completed properly by
emitting 'gesture-end', but not when Clutter considers the gesture
cancelled - in that case, the view remains stuck in an intermediate
position. To fix, treat 'gesture-cancel' the same as 'gesture-end'.
https://bugzilla.gnome.org/show_bug.cgi?id=689394
This means that windows will be positioned correctly with respect
to the panel when the shell starts up, and there won't be adjusting
after the session animation zooms in entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=694227
Due to a bad rebase causing freezeUpdateCount to never get initialized,
these functions effectively did nothing. Since we're going to go to a
different mechanism for freezing region updates, let's just tear these
out now instead of fixing them before tearing them out.
https://bugzilla.gnome.org/show_bug.cgi?id=694227
PopupMenuManager eats the next release event, which would otherwise close
the menu, so we need to tell dnd that we're handling it, and no drag should
be started, so it can ungrab the pointer and restore state.
https://bugzilla.gnome.org/show_bug.cgi?id=694276
