Ultimately, we want to add support for GDM's new ChoiceList
PAM extension. That extension allows PAM modules to present
a list of choices to the user. Before we can support that
extension, however, we need to have a list control in the
login-screen/unlock screen. This commit adds that control.
For the most part, it's a copy-and-paste of the gdm userlist,
but with less features. It lacks API specific to the users,
lacks the built in timed login indicator, etc. It does feature
a label heading.
At the moment the timed login feature is implemented in the user list.
If there's no user list, we don't show the indicator anywhere and
don't proceed with timed login.
This commit allows timed login to work when the user list is disabled.
It accomplishes this by putting the timed login indicator on the
auth prompt, in that scenario.
We only want to allow the user to type the preemptive password in
one smooth motion. If they start to type, and then stop typing,
we should discard their preemptive password as expired.
Typing ahead the password is just a convenience for users who don't
want to manually lift the shift before typing their passwords, after
all.
Right now we fade out any stale auth messages as soon as the user starts
typing. This behavior doesn't really make sense if the user is typing up
front, before a password is asked.
If a user uses a token at login time, we need to make sure they continue
to use the token at unlock time.
As a prerequisite for addressing that problem we need to know up front
if a user logged in with a token at all.
This commit adds the necessary api to detect that case.
If a user inserts the smartcard when the screen is locked/blanked
we should ask them their pin right away.
At the moment they have to wiggle the mouse or do some other
action to get the screen to unblank.
Destroying and recreating the entire events list on every change is not only
wasteful, it also breaks the clear functionality as messages scheduled for
removal are replaced with "new" messages after the first message has been
removed.
Address both issues by keeping track of all messages and re-use them
whenever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/325
If a clone gets destroyed before the corresponding MetaWindow is
removed from the workspace, we will still find it in the list of
clones and try to destroy it again. Avoid the resulting warnings
by updating the list of clones immediately when a clone is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
If a clone gets destroyed before the corresponding MetaWindow is
removed from the workspace, we will still find it in the list of
clones and try to destroy it again. Avoid the resulting warnings
by updating the list of clones immediately when a clone is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
And stop using FocusCaretTracker for caret position purposes. This
new object uses 1) the text-input protocol in wayland and 2) Info
from IBusPanelService for X11 (which is meant to work for XIM too).
This drops the usage of AtspiEventListener for OSK purposes, which
is best to avoid.
Modes, extensions and other GNOME Shell assets are searched in appropriate
subdirectories of each directory in XDG_DATA_DIRS, falling back
to global.datadir.
However, this isn't the case for themes, which are currently always expected
in global.datadir, even when referenced by a mode in a different XDG_DATA_DIR.
The fix is to have the theme finding pattern follow the same logic as other
elements.
Fixes#167.
(cherry picked from commit d6d09fd3c8)
Similar to what it's done when the main connection changes, we need
to make sure that the icon in the panel gets updated before calling
_syncConnectivity(), so that the icon gets always updated if needed,
regardless of whether there's an active connection or not.
This is needed because there's at least one case when an icon should
be shown when the computer is not connected to any network: when a
hotspot has been enabled, which can be useful even if there's not
an internet connection to share (e.g. to easily allow connecting
other devices to the computer.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/214
(cherry picked from commit d8b9e23502)
While the libnm-glib version of the function returns a GByteArray*
that gjs can directly cast to the required gutf8*, the libnm function
returns GBytes* from which we need to explicitly fetch the data.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/136
(cherry picked from commit c0a453f64f)
commit 642107a2 attempts to avoid resetting the current keymap on
spurious input source changes.
It does this by checking if the current layout id is found in
the new list of layouts and resetting the current layout to the
associated match in the list. By not nullifying the current
layout, it won't get subsequently reset.
Unfortunately, if the order of the list changes, resetting the
current keymap is still necessary, since the order corresponds
with the index of the activated group.
This commit changes the code to nullify the current layout if
its group index changes.
https://bugzilla.redhat.com/show_bug.cgi?id=1573923
The IM can pretty much update the input sources anytime (even if
to set the same ones). That ends up triggering rebuilding all user
defined keymaps, and losing modifier state if we are unfortunate
enough that this caught us while pressing one.
One common situation seems to be password entries, resulting in
the wrong character being printed if the first character happens
to require the shift key.
If the current keymap is not found in the newly loaded list,
this._current will end up null, with the same behavior as we get
currently (immediate keymap reload).
https://bugzilla.redhat.com/show_bug.cgi?id=1569211https://gitlab.gnome.org/GNOME/gnome-shell/issues/240Closes: #240
We use the close() method to disconnect signal handlers set up in
init(), however the handler ID is only valid in the first call in
case the method is called more than once.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/221
Otherwise it happens that porthole is computed again after that the
overlay is hidden (triggered by a layout reallocation) and thus not
regenerated again afterwards.
https://bugzilla.gnome.org/show_bug.cgi?id=792687
(cherry picked from commit 5fcf40b973)
Specify the horizontal alignment via the x_align property when creating
the StIcon, since this function expects one argument, not two.
(cherry picked from commit cdbc99e992)
The author of the original URL-matching regex warns[0] that the pattern may
cause certain regex engines to lock up with certain input, namely patterns
that contain parentheses. It turns out SpiderMonkey is affected, but rather
than switching to the author's improved version (that is still crazy), sim-
plify the pattern a bit by removing support for nested parentheses in URLs.
Even a single pair of parentheses is extremely rare, so this is unlikely to
make a noticeable difference (other than not locking up SpiderMonkey of
course) ...
[0] http://daringfireball.net/2010/07/improved_regex_for_matching_urls
Since commit 78a92fb6be we no longer pop up authentication dialogs
on the lock screen, however any dialog that is already open at that
time remains open. This is unexpected, so hide the dialog until
the screen is unlocked again.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/166
Since commit 1939e22c22, we move the keyboard focus with the hover
highlight. However while this makes sense when interacting with
the window picker, it interferes with keyboard navigation of other
components like dash or top bar. Address this by only moving the
focus when the previous focus was already inside the window picker
or unset.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/50
The original UTC support in GWeather piggy-backed on the existing API, but
as "country" or "city" don't make sense in the context of UTC or AoE, the
concept of "named timezones" was introduced. Handle those explicitly to get
back labels for those locations.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/150
We don't toggle the overview if the request happens too close to the
last activation, to filter out double-clicks or activation by both
the hot corner and a click. However as the check is based on the
real time, the check breaks if the system clock moves backwards and
the last activations appears to be in the future. Fix this by using
monotonic time which is guaranteed to only move forward.
https://bugzilla.gnome.org/show_bug.cgi?id=763886
While polkit requests *should* be the result of a user action, that's
not always the case in practice and authentication dialogs can pop up
out of nowhere at any time. That's always annoying, but particularly
bad on the lock screen. If we disabled the polkit component altogether,
the fallback GTK-based agent would kick in, so instead handle the case
explicitly and postpone showing the dialog until the session is unlocked.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/179
Even though we are using an "xkb" source, it still makes sense to
pass the event through the IBus simple engine, in order to let it
handle compose keys and ctrl+shift+[u|e].
https://gitlab.gnome.org/GNOME/gnome-shell/issues/115Closes: #115
boltd 0.2 gained a property that indicates if it is authorizing
devices or not. If it indeed is not authorizing then we wont
try to enroll new devices because that would otherwise lead to
and error.
When we move keyboard focus to the search entry, we replay the key press
that triggered the move to the entry using ClutterActor's event() method.
Since commit 3b293e91e we specify that the event is in the capture phase
to make it work with StIMText, but now that commit 83accce24 removed it,
we have to return to the expected non-capture flag that matches the orig-
inal event to unbreak find-as-you-type functionality.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/72
Find-as-you type was never automatically handled by StIMText, but
by the existing stage key-press handler. The functionality broke
for a different reason, we will fix it after reverting the recent
captured-event changes.
This reverts commits bc4462cd0c and e4ee944d8d.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/72
Since commit c4f2bb5f, close buttons are hidden by making them fully
transparent rather than setting their visibility to false to keep
the overall message layout stable. As a result, the buttons now work
even when invisible, which is clearly unexpected - fix this by updating
the reactive property appropriately.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/66
When not using arrow notation with anonymous functions, we use Lang.bind()
to bind `this` to named callbacks. However since ES5, this functionality
is already provided by Function.prototype.bind() - in fact, Lang.bind()
itself uses it when no extra arguments are specified. Just use the built-in
function directly where possible, and use arrow notation in the few places
where we pass additional arguments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/23
