The WM_NAME property is of type TEXT_PROPERTY, which is supposed to be
returned as UTF-8. Commit 840378ae68 broke that assumption, resulting
in crashes with non-UTF8 locales; however the "fix" of converting from
LATIN1 to UTF8 is wrong as well, as the conversion will spit out garbage
when the input encoding isn't actually LATIN1.
Now that the original issue in text_property_to_utf8() has been fixed,
we can simply revert the relevant bits of commit d62491f46e.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/227
This allows input methods to inject key events with specific keyval/keycode,
those events will be flagged with CLUTTER_EVENT_FLAG_INPUT_METHOD so they
won't be processed by the IM again.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/531
If the user maps eg. Alt+F2 to a pad button, the MetaInputSettings will
send the full Alt press, F2 press, F2 release, Alt release sequence.
However the keycode corresponding to Alt is found in level 1, so the
Shift modifier gets unintendedly latched in addition to the Alt key
press/release pair.
We could probably improve keycode lookup heuristics so level=0 (and
no modifier latching) is preferred, but we can do without it altogether
for modifier keys.
In order to allow a window with a custom rule placement to be moved
together with its parent, the final rule used derived from the
constraining were used for subsequent constraints. This was not enough
as some constraining cannot be translated into a rule, such as sliding
across some axis.
Instead, make it a bit simpler and just remember the position relative
to the parent window, and use that the next time.
This is a rework of 5376c31a33 which
caused the unwanted side effects.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/332
When constructing MetaMonitorsConfig objects, store which type
of switch_config they are for (or UNKNOWN if it is not such
type of config).
Stop unconditionally setting current_switch_config to UNKNOWN when
handling monitors changed events. Instead, set it to the switch_config
type stored in the MonitorsConfig in the codepath that updates logical
state. In addition to being called in the hotplug case along the same
code flow that generates monitors changed events, this is also called
in the coldplug case where a secondary monitor was connected before
mutter was started.
When creating the default linear display config, create it as a
switch_config so that internal state gets updated to represent
linear mode when this config is used.
The previous behaviour of unconditionally resetting current_switch_config
to UNKNOWN was breaking the internal state machine for display config
switching, causing misbehaviour in gnome-shell's switchMonitor UI when
using display switch hotkeys. The lack of internal tracking when the
displays are already in the default "Join Displays" linear mode was
then causing the first display switch hotkey press to do nothing
(it would attempt to select "Join Displays" mode, but that was already
active).
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/281https://gitlab.gnome.org/GNOME/mutter/merge_requests/213
When repicking after a surface was destroyed, if the destroyed surface
was the drag focus, we'd try to focus-out from it after it was
destroyed, causing a NULL pointer dereference.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/336
With Wayland, a window is not showing until it's shown. Until this
patch, the initial state of MetaWindow, on the other hand, was that a
window is initialized as showing. This means that for a window to
actually be classified as shown (MetaWindow::hidden set to FALSE),
something would first have to hide it.
Normally, this wasn't an issue, as normally we'd first create a window,
determine it shouldn't be visible (due to missing buffer), hide it
before the next paint, then eventually show it. This doesn't work if
mutter isn't drawing any frames at the moment (e.g. the user switched
VT), as we'd miss the hiding before showing as e result of a buffer
being attached. The most visible side effect is that a window can't be
moved as the window actor remains frozen.
This commit fixes this issue by correctly classifying a newly created
Wayland window as "hidden".
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/331
The clip and opaque region are both in a translated stage coordinate
space, where the origin is in the top left corner of the painted
texture. The painting, however, is in the texture coordinate space,
so when the texture is scaled, the coordinate spaces differ.
Handle this by transforming the clip and opaque region to texture
coordinate space before computing the blend region and the opaque region
to paint.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/300
They were int before entering MetaShapedTexture, used as ints in the
cairo regions and rectangles, so there is no reason they should be
stored as unsigned.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/300
meta_renderer_native_gles3_read_pixels() was assuming that the target
buffer stride == width * 4. This is not generally true. When a DRM
driver allocates a dumb buffer, it is free to choose a stride so that
the buffer can actually work on the hardware.
Record the driver chosen stride in MetaDumbBuffer, and use it in the CPU
copy path. This should fix any possible stride issues in
meta_renderer_native_gles3_read_pixels().
Track the allocated dumb buffer size in MetaDumbBuffer. Assert that the
size is as expected in copy_shared_framebuffer_cpu().
This is just to ensure that Cogl and the real size match. The size from
Cogl was used in the copy, so getting that wrong might have written
beyond the allocation.
This is a safety measure and has not been observed to happen yet.
If drmModeAddFB2() does not work, the fallback to drmModeAddFB() can
only handle a single specific format. Make sure the requested format is
that one format, and fail the operation otherwise.
This should at least makes the failure mode obvious on such old systems
where the kernel does not support AddFB2, rather than producing wrong
colors.
To avoid a known race condition in the wl_output protocol documented in
https://phabricator.freedesktop.org/T7722, mutter delays the `wl_output`
destruction but nullify the `logical_monitor` associated with the
`wl_output` and the binding routine `bind_output()` makes sure not to
send wl_output events if the `logical_monitor` is `NULL` (see commit
1923db97).
The binding routine for `xdg_output` however does not check for such a
condition, hence if the output configuration changes while a client is
binding to xdg-output (typically Xwayland at startup), mutter would
crash while trying to access the `logical_monitor` which was nullified
by the change in configuration.
Just like `bind_output()` does for wl_output, do not send xdg-output
events if there is no `logical_monitor` yet.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/194
Changes in window decoration result in the window being reparented
in and out its frame. This in turn causes unmap/map events, and
XI_FocusOut if the window happened to be focused.
In order to preserve the focused window across the decoration change,
add a flag so that the focus may be restored on MapNotify.
Closes: #273
The compositor will automatically unredirect the top most window which
is fully visible on screen. When unredirecting windows, it also shapes
the compositor overlay window (COW) so that other redirected windows
still shows correctly.
The function `get_top_visible_window_actor()` however will simply walks
down the window list, so if a window is placed on a layer above and
unredirected, then iconified by the client, it will still be picked up
by `get_top_visible_window_actor()` and he compositor will reckon it's
still unredirected while not in a visible state anymore, thus leaving a
black area on screen.
Make sure we skip the windows not known to the compositor while picking
the top visible window actor to avoid this issue.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/306
Previously, trackballs were detected based on the presence of the
substring "trackball" in the device name. This had the downside of
missing devices, such as the Kensington Expert Mouse, which don't have
"trackball" in their names.
Rather than depending on the device name, use the ID_INPUT_TRACKBALL
property from udev to determine whether or not to treat a device as a
trackball.
This adds a new function, `is_trackball_device`, to MetaInputEvents, and
eliminates the `meta_input_device_is_trackball` function.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/258
If an effect is active and it overrides the paint volume, we should
always recompute the paint volume when requested and not use the
cache, since the paint volume override can change from call to
call depending on what phase of painting we are in. For instance,
if we are part way through painting effects and request the
paint volume, the paint volume should only go up to the current
effect, but in a later call to compute repaint regions, the
paint volume needs to expand to accomadate the effect.
This still involves a lot of recomputation in the case of effects -
in a later clutter version it would be worth adding an API to
allow effects to explicitly recompute and return a new the paint
volume up to the current effect as opposed to recomputing
the cached one.
Previously we were checking l->data != NULL || (l->data != NULL &&
l->data != priv->current_effect). This would continue the loop even
if l->data == priv->current_effect, since l->data != NULL, which was
not the intention of that loop.
We also don't need to check that l->data != NULL before checking if
it does not match the current_effect, since we already checked
that current_effect was non-NULL before entering the loop.
On Wayland, xdg-foreign would leave a modal dialog managed even after
the imported surface is destroyed.
This is sub-optimal and this breaks the atomic relationship one would
expect between the parent and its modal dialog.
Make sure we unmanage the dialog if transient_for is unset even for
Wayland native windows.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/174
Related: https://gitlab.gnome.org/GNOME/mutter/issues/221
Some tablets have a noticable pointer jump on tip down/up, causing unintended
lines during drawing. Likewise, a button event may have an axis update that we
currently ignore. libinput provides tablet axis events only if no other state
changes, the client must instead get the current axis data from the tip/button
event. So let's do this, process the event axis data during tip/button as
well.
A libinput recording to reproduce is the 'dots.yml' in
https://gitlab.freedesktop.org/libinput/libinput/issues/128Fixes#289
Unfortunately XKeysymToKeycode() falls short in that it coalesces keysyms
into keycodes pertaining to the first level (i.e. lowercase). Add a
ClutterKeymapX11 method (much alike its GdkKeymap counterpart) to look up
all matches for the given keysym.
Two other helper methods have been added so the virtual device can fetch
the current keyboard group, and latch modifiers for key emission. Combining
all this, the virtual device is now able to handle keycodes in further
levels.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/135
