Add a new interface, gtk_shell, than can be used by gtk to
retrieve a surface extension called gtk_surface, which will be
used to communicate with mutter all the GTK extensions to EWMH
https://bugzilla.gnome.org/show_bug.cgi?id=707128
Add support for GTK application menus
To do so, we need to be able to set surface state before creating
the MetaWindow, so we introduce MetaWaylandSurfaceInitialState as
a staging area.
The gtk-shell-surface implementation would either write to the
initial state, or directly to the window.
At the same, implement set_title and set_class too, because it's
easy enough.
https://bugzilla.gnome.org/show_bug.cgi?id=707128
According to the wayland documentation, damage outside the
window size is ignored.
This happened with xwayland+wlshm (causing a GL error when calling
TexSubImage2D), probably due to not resizing the buffer
until we receive the corresponding X event.
Might also be an off-by-one in xwayland, as the window size did
not actually change.
Note: we might want to take the configure_notify path instead,
and keep the GL/clutter size consistent with wayland rather than
X, because in the end that's what matters for events and composition.
https://bugzilla.gnome.org/show_bug.cgi?id=706289
If, checking the event timestamps, we see that a new configuration
was explicitly requested by an another XRandR client, don't proceed to
apply the intended configuration again, even if looking at the
EDIDs it appears that the outputs changed.
This works around some buggy Xorg drivers (qxl, vbox) that generate
a new serial number everytime the user resizes the host window.
https://bugzilla.gnome.org/show_bug.cgi?id=706735
device_id_max is set to the device_id in ensure_device_monitor(), but we
will loop only to (device_id_max - 1) when propagating the sync XEvent
down, missing the device correspondng to device_id_max.
https://bugzilla.gnome.org/show_bug.cgi?id=707250
The protocol specification says that opaque / input regions should be
considered pending state and should only be actually swapped out when
the surface is committed, so it can be set atomically.
We had an assertion in meta_wayland_surface_free() that after
a repick() we would not choose the freed surface, but that didn't
consider surfaces destroyed while holding the implicit pointer
grab (ie, because the user clicked on the X button). In that case,
we need to bypass the grab infrastructure and explicitly unfocus
the dead surface.
https://bugzilla.gnome.org/show_bug.cgi?id=706982
After a MetaWaylandSurface is associated with a MetaWindow, it
should be freed only when the MetaWindow is unmanaged. For wayland
clients, the window is unmanaged when the resource is destroyed,
but for X11 clients we want to wait for the unmap event.
https://bugzilla.gnome.org/show_bug.cgi?id=705917
Calling XIGrabDevice has no effect under wayland, because the
xserver is getting events from us. Instead, we need to use our
own interfaces for grabs.
At the same time, we can simplify the public API, as plugins
should always listen for events using clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=705917
We need to track the full xkb_state to have the necessary information
to send to the clients, otherwise they may get confused and lock
or invert the modifiers. In the evdev backend, we just retrieve the
same state object that clutter is using, while in the other backends
we fake the state using what clutter is providing (which is a subset
of what X11 provides, which would be necessary to have full state)
https://bugzilla.gnome.org/show_bug.cgi?id=705862
Once mutter is started from weston-launch on its own VT, there is
no way to change VT again (for example to actually start an application),
because the keyboard is put in raw mode.
So introduce some keybindings mimicking the standard X ones (Ctrl+Alt+Fn)
that switch the VT manually when activated.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
Now that we have a setuid launcher binary, we can make use of
using a private protocol through the socket we're passed at startup.
We also use the new hook in clutter-evdev to ask mutter-launch for
the FDs of the input devices we need, and we emulate the old X
DRM lock with a nested GMainContext without sources.
In the future, mutter-launch will be replaced with the new logind
API currently in development.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
Set the TTY mode appropriately at startup, and clean it up
when the compositor exits. Also, take control of VT switching,
including the calls to drmSetMaster and drmDropMaster as appropriate.
In the future, we the kernel implements the mute evdev ioctl,
we'll also make sure that input devices are appropriately released.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
Being a setuid binary, our LD_LIBRARY_PATH is cleared by glibc at
startup, but we need the spawned binary to see it, otherwise
jhbuild doesn't work, so hardcode it using the configured libdir.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
Remove the ability to launch as a different user, which we don't
need because we're spawned by gdm or by the user manually on the
command line.
At the same time, require an active local session, and remove
the ability to run from anywhere by being in the right user group
(which automatically gives you root-like privileges)
https://bugzilla.gnome.org/show_bug.cgi?id=705861
To run mutter as a display server, one needs to acquire and
release the DRM master, which is only possible for root, so
we take advantage of weston-launch, a small setuid helper binary
written for the weston project. We import our own slightly
modified copy of it, because weston-launch only launches weston,
for security reasons.
https://bugzilla.gnome.org/show_bug.cgi?id=705861
We must send frame_drawn and frame_timing messages to even when
we don't actually queue a redraw on screen to comply with the
WM sync spec.
So throttle such apps to down to a ~100ms interval.
https://bugzilla.gnome.org/show_bug.cgi?id=703332
When we get a damage event we update the window by calling
meta_shaped_texture_update_area which queues a redraw on the actor.
We can avoid that for obscured regions by comparing the damage area to
our visible area.
This patch causes _NET_WM_FRAME_DRAWN messages to be not sent in some cases
where they should be sent; they will be added back in a later commit.
https://bugzilla.gnome.org/show_bug.cgi?id=703332
When drawing entirely opaque regions, we traditionally kept blending on
simply because it made the code more convenient and obvious to handle.
However, this can cause lots of performance issues on GPUs that aren't
too powerful, as they have to readback the buffer underneath.
Keep track of the opaque region set by windows (through _NET_WM_OPAQUE_REGION,
Wayland opaque_region hints, standard RGB32 frame masks or similar), and draw
those rectangles separately through a different path with blending turned off.
https://bugzilla.gnome.org/show_bug.cgi?id=707019
Split out pipeline creation to a separate function so that we don't
have so much dense code in the paint function itself, and remove some
indentation levels.
Also, don't use our own template for the unmasked pipeline, since it
has nothing different from the default pipeline template.
We also don't store the pipelines anymore since their creation isn't
really helping us; we set the mask texture and paint texture on every
paint anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=707019
We need to track the full xkb_state to have the necessary information
to send to the clients, otherwise they may get confused and lock
or invert the modifiers. In the evdev backend, we just retrieve the
same state object that clutter is using, while in the other backends
we fake the state using what clutter is providing (which is a subset
of what X11 provides, which would be necessary to have full state)
https://bugzilla.gnome.org/show_bug.cgi?id=705862
The user active watch is a one-fire watch, but it is valid in the API
for the callback to explicitly remove the watch itself. In that case,
the watch will be invalid after the user removes it, and the memory
potentially freed. So make sure to not dereference the watch after
the callback is called.
https://bugzilla.gnome.org/show_bug.cgi?id=706825
Dialogs that don't have a parent should not be skip-taskbar,
otherwise they get lost and there is no way to recover them
(because they're not autoraised when activating the parent),
but toolkits and applications set the hint anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=673399
Modify all visible instances of mutter with mutter-wayland
(libraries, folders, pkgconfig, etc.), so that the wayland
branch can be installed alongside the usual X11 mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=705497
In the wayland branch of mutter, we want to build a wayland version
of the mutter libraries, and that's much easier if we just build
wayland support unconditionally.
The define is kept to avoid a huge diff, but should be removed
in a later patch.
Also, wayland support can still be disable at runtime, by
launching mutter without the --nested switch.
https://bugzilla.gnome.org/show_bug.cgi?id=705497
If we're attempting to reconfigure the CRTCs to the same parameter,
skip the X call, as in some drivers a modeset can take time and
cause flicker.
https://bugzilla.gnome.org/show_bug.cgi?id=706672
To allow other clients (gnome-session, gnome-settings-daemon)
to monitor user activity, introduce a DBus interface for the
idle monitor inside mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=706005
When running as a wayland compositor, we can't use the xserver's
IDLETIME, because that's updated only in response to X events.
But we have all the events ourselves, so we can just run the timer
in process.
https://bugzilla.gnome.org/show_bug.cgi?id=706005
We can't use the X11 stage window, if clutter is not using the X11
backend (and even if it was, it would be bogus when the xwayland
server is not the one clutter is talking to). Instead, we introduce
the concept of "focus type", which we use to differentiate the
various meanings of None in the focus_xwindow field.
https://bugzilla.gnome.org/show_bug.cgi?id=706364
Remove grab window and cursor from the API, and just grab always
on the stage window with no cursor.
This is mainly to remove the X11 usage in the public API, in preparation
for implementing this in wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=705917
Using out-of-band notifications from the wayland protocol or from
X is racy, in that the client could ask for the new resources before
we have them.
Instead, with a signal, we are sure that when the client asks for
it, it will get the right values.
https://bugzilla.gnome.org/show_bug.cgi?id=706382
Under X, we need to use XFixes to watch the cursor changing, while
on wayland, we're in charge of setting and painting the cursor.
MetaCursorTracker provides the abstraction layer for gnome-shell,
which can thus drop ShellXFixesCursor. In the future, it may grow
the ability to watch for pointer position too, especially if
CursorEvents are added to the next version of XInput2, and thus
it would also replace the PointerWatcher we use for gnome-shell's
magnifier.
https://bugzilla.gnome.org/show_bug.cgi?id=705911
The value passed to XRRCrtcSetGamma must be allocated with
XRRAllocGamma (because it relies on the locations of green and blue),
otherwise garbage is sent on the wire.
https://bugzilla.gnome.org/show_bug.cgi?id=706231
We were relying on the XRandR events from the X server to update
the configuration, but we were calling meta_monitor_config_update_current()
immediately after, so the MonitorConfig would be updated with the
old configuration (and we would save that to disk!)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
First disable CRTCs that should be off in the new configuration,
then resize the framebuffer, then enable the new CRTCs.
If we don't do that, and we're making the screen smaller, X complains
with a BadMatch.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add "edid-file", if we have one (in the KMS case, where we can point
people to the right sysfs file), or "edid" with inline data.
These are needed by colord to build the default ICC profile for
uncalibrated displays.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Instead of keeping a forest of if backend else ..., use a subclass
and virtual functions to discriminate between XRandR and the
dummy backend (which lives in the parent class togheter with the
common code)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
We want to show a dialog when a display change happens from the
control center. To do so, add a new vfunc to MetaPlugin and
call it when a configuration change is requested via DBus.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add GetCrtcGamma() and SetCrtcGamma(), that wrap the similarly
named XRandR API. These are used by GnomeRR inside the color
plugin of the control center (and may go away if the color
plugin decides to do something different under wayland)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
GnomeRR needs that too.
The backlight is exported as a normalized 0-100 value, or -1 if not
supported. Clamping to HW limits is handled by the backend.
Changing backlight uses a different method call, to avoid recomputing
the full display configuration every time the user presses the
backlight keys.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
The default configuration is extended, which is only possible
if there are as many CRTCs as outputs, so make sure that's true.
Also, add more and bigger modes, so that different sizes will
be chosen for the three outputs.
A nice side effect of this is that with a real 1920x1080 + 1600x900
layout, if you disable the VGA you get a stage that matches the
screen size, which triggers the legacy fullscreen path in the
outside mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Use a private output property to store if the output is in
presentation mode or not, so that this information is not lost
after the configuration read back from the server.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Ripped off libgnome-desktop, trimming the parts that checked
that the configuration was plausible, as that should be done
in gnome-control-center before asking mutter for a change.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add a new object, MetaMonitorConfig, that takes care of converting
between the logical configurations stored in monitors.xml and
the HW resources exposed by MonitorManager.
This commit includes loading and saving of configurations, but
still missing is the actual CRTC assignments and a default
configuration when none is found in the file.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Read the current transform from XRandR, and expose the transforms
that are really supported on the bus.
The dummy backend now advertises all transforms, since it doesn't
actually apply them.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Instead of a full white background, make one with a random color.
This way the different "monitors" are visible and it's easier
to debug the DBus API.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add a number of dummy outputs and modes to the dummy backend,
and implement the writing bits.
The only visible effect is that you can change the screen size,
which resizes the output window.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Now MonitorManager does its own handling of XRandR events, which
means we no longer handle ConfigureNotify on the root window.
MetaScreen reacts to MonitorManager::monitor-changed and updates
its internal state, including the new size.
This paves the way for doing display configuration using only
the dummy backend, which would allow testing wl_output interfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Implement ApplyConfiguration in terms of XRandR calls.
Error checking is done before actually committing the configuration.
If mutter is using one of the other monitor config backends, an
error is reported and nothing happens.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Turns out that even if two outputs say that they can be controlled
by a given CRTC, you can't configure them in the same CRTC unless
they are marked as "possible clones" one of the other.
This can further restrict the configuration options, so we need
to expose this limitation in the DBus API.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
This new interface will be used by the control center and possibly
the settings daemon to configure the screens. It is designed to
resemble a simplified XRandR, while still exposing all the quirks
of the hardware, so that the panel can limit the user choices
appropriately.
To do so, MetaMonitorMode needs to track CRTCs, outputs and modes,
so the low level objects have been decoupled from the high-level
MetaMonitorInfo, which is used by core and API and offers a simplified
view of HW, that hides away the details of what is cloned and how.
This is still not efficient as it should be, because on every
HW change we drop all data structures and rebuild them from scratch
(which is not expensive because there aren't many of them, but
at least in the XRandR path it involves a few sync X calls)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Consolidate all places that deal with output configuration in
MetaScreen, which gets it either from XRandR or from a dummy static configuration.
We still need to read the Xinerama config, even when running xwayland,
because we need the indices for _NET_WM_FULLSCREEN_MONITORS, but
now we do it only when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
We need to use g_signal_connect_object(), rather than g_signal_connect(),
because the window actor can be destroyed before the window emits
the final notify::appears-focused inside unmanage, if the plugin
decides that it doesn't want to animate the destruction (which
happens with dialogs and the default plugin)
https://bugzilla.gnome.org/show_bug.cgi?id=706207
We need to use g_signal_connect_object(), rather than g_signal_connect(),
because the window actor can be destroyed before the window emits
the final notify::appears-focused inside unmanage, if the plugin
decides that it doesn't want to animate the destruction (which
happens with dialogs and the default plugin)
https://bugzilla.gnome.org/show_bug.cgi?id=706207
It is a very bad idea in a glib program (especially one heavily
using glib child watching facilities, like gnome-shell) to handle
SIGCHLD. While we're there, let's also use g_spawn_async, which
solves some malloc-after-fork problems and makes the code generally
cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=705816
The current surface refers to the surface right below the pointer
(according to the pick performed by clutter), while the focus surface
is the one receiving events. They can be out of sync in case of
grabs, in which case we should keep trying to focus the current
surface.
https://bugzilla.gnome.org/show_bug.cgi?id=706077
The previous code was leaving focus fields dirty in MetaWaylandPointer
and MetaWaylandKeyboard at time (which could crash the X server
because of invalid object IDs)
The new code is more tighly integrated in the normal X11 code
for handling keyboard focus (meaning that the core idea of input
focus is also correct now), so that meta_window_unmanage() can
do the right thing. As a side benefit, clicking on wayland clients
now unfocus X11 clients.
For the mouse focus, we need to clear the surface pointer when
the metawindowactor is destroyed (even if the actual actor is
kept alive for effects), so that a repick finds a different pointer
focus.
https://bugzilla.gnome.org/show_bug.cgi?id=705859
Remove window_surfaces, as the FIXME asks for. We don't need it
because we can obtain the surface from the MetaWindow, and
follow the wayland compositor path for both types of clients.
https://bugzilla.gnome.org/show_bug.cgi?id=705818
When running Mutter under Cogl's KMS backend no cursor will be
provided so instead this makes it so the cursor will be painted as a
CoglTexture that gets moved in response to mouse motion events. The
painting is done in a subclass of ClutterStage so that we can
guarantee that the cursor will be painted on top of everything else.
This patch adds support for the set_cursor method on the pointer
interface so that clients can change the cursor image.
The set_pointer method sets a surface and a hotspot position to use
for the cursor image. The surface's buffer is converted to a
CoglTexture and attached to a pipeline to paint directly via Cogl. If
a new buffer is attached to the surface the image will be updated. The
cursor reverts back to the default image whenever to the pointer focus
is moved off of any surface.
The image for the pointer is taken from X. It gets installed into
a fixed data location for mutter.
This copies the basic input support from the Clayland demo compositor.
It adds a basic wl_seat implementation which can convert Clutter mouse
events to Wayland events. For this to work all of the wayland surface
actors need to be made reactive.
The wayland keyboard input focus surface is updated whenever Mutter
sees a FocusIn event so that it will stay in synch with whatever
surface Mutter wants as the focus. Wayland surfaces don't get this
event so for now it will just give them focus whenever they are
clicked as a hack to test the code.
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
This breaks down the assumptions in stack-tracker.c and stack.c that
Mutter is only stacking X windows.
The stack tracker now tracks windows using a MetaStackWindow structure
which is a union with a type member so that X windows can be
distinguished from Wayland windows.
Some notable changes are:
Queued stack tracker operations that affect Wayland windows will not be
associated with an X serial number.
If an operation only affects a Wayland window and there are no queued
stack tracker operations ("unvalidated predictions") then the operation
is applied immediately since there is no server involved with changing
the stacking for Wayland windows.
The stack tracker can no longer respond to X events by turning them into
stack operations and discarding the predicted operations made prior to
that event because operations based on X events don't know anything
about the stacking of Wayland windows.
Instead of discarding old predictions the new approach is to trust the
predictions but whenever we receive an event from the server that
affects stacking we cross-reference with the predicted stack and check
for consistency. So e.g. if we have an event that says ADD window A then
we apply the predictions (up to the serial for that event) and verify
the predicted state includes a window A. Similarly if an event says
RAISE_ABOVE(B, C) we can apply the predictions (up to the serial for
that event) and verify that window B is above C.
If we ever receive spurious stacking events (with a serial older than we
would expect) or find an inconsistency (some things aren't possible to
predict from the compositor) then we hit a re-synchronization code-path
that will query the X server for the full stacking order and then use
that stack to walk through our combined stack and force the X windows to
match the just queried stack but avoiding disrupting the relative
stacking of Wayland windows. This will be relatively expensive but
shouldn't be hit for compositor initiated restacking operations where
our predictions should be accurate.
The code in core/stack.c that deals with synchronizing the window stack
with the X server had to be updated quite heavily. In general the patch
avoids changing the fundamental approach being used but most of the code
did need some amount of re-factoring to consider what re-stacking
operations actually involve X or not and when we need to restack X
windows we sometimes need to search for a suitable X sibling to restack
relative too since the closest siblings may be Wayland windows.
This adds support for running mutter as a hybrid X and Wayland
compositor. It runs a headless XWayland server for X applications
that presents wayland surfaces back to mutter which mutter can then
composite.
This aims to not break Mutter's existing support for the traditional X
compositing model which means a single build of Mutter can be
distributed supporting the traditional model and the new Wayland based
compositing model.
TODO: although building with --disable-wayland has at least been tested,
I still haven't actually verified that running as a traditional
compositor isn't broken currently.
Note: At this point no input is supported
Note: multiple authors have contributed to this patch:
Authored-by: Robert Bragg <robert@linux.intel.com>
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Rico Tzschichholz.
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
This adds a --nested option to request that mutter no longer run as a
classic X compositor with an output window mapped on the X Composite
Overlay Window and also not assume it is running directly under X.
The intention is that in this mode Mutter will itself launch a headless
X server and display output will be handled by Clutter and Cogl. This
will enable running Mutter nested as an application within an X session.
This patch introduces an internal meta_is_wayland_compositor() function
as a means to condition the way mutter operates when running as a
traditional X compositor vs running as a wayland compositor where the
compositor and display server are combined into a single process.
Later we also expect to add a --kms option as another way of enabling
this wayland compositor mode that will assume full control of the
display hardware instead of running as a nested application.
This adds a --with-xwayland-path configure option that can be used to
specify the absolute path of a headless X server binary supporting
the wayland xserver protocol.
This adds a --enable-wayland configure option to enable building mutter
as a hybrid X and Wayland compositor. By default the option is disabled.
If enabled then HAVE_WAYLAND is defined for C code and as an automake
conditional.
This copies the xserver.xml wayland protocol into a protocol/ directory
since wayland support will depend on this protocol for communicating
with an xwayland X server. Copying the spec like this is consistent with
Weston so we don't need a configure option to locate an external spec.
We now track whether a window has an input shape specified via the X
Shape extension. Intersecting that with the bounding shape (as required
by the X Shape extension) we use the resulting rectangles to paint
window silhouettes when picking. As well as improving the correctness of
picking this should also be much more efficient because typically when
only picking solid rectangles then the need to actually render and issue
a read_pixels request can be optimized away and instead the picking is
done on the cpu.
GNOME Shell's actors aren't touch capable, so we need to make sure that
they get the fallback pointer emulated events for now. This fixes the top
bar and other elements not working on a touchscreen without a grab.
https://bugzilla.gnome.org/show_bug.cgi?id=697192
Some cards have 2k texture limits, which can be smaller than
commonly sized backgrounds.
One way to get around this problem is to use Cogl's "sliced texture"
feature, that transparently uses several hardware textures under the hood.
This commit changes background textures loaded from file to potentially
use slicing. Based on a patch by Jasper St. Pierre
<jstpierre@mecheye.net>.
https://bugzilla.gnome.org/show_bug.cgi?id=702283
Some cards have 2k texture limits, which can be smaller than
commonly sized backgrounds.
This commit downscales the background in this situation, so that
it won't fail to load.
https://bugzilla.gnome.org/show_bug.cgi?id=702283
Originally attached dialogs did not have a titlebar, which the code
still assumes though it hasn't been true for a while; nowadays, the
actual look of attached dialogs is controlled by the theme.
As GTK+ recently gained the ability to set custom titlebars, we need
to support attached dialogs with either full borders (WM decorations)
or border-only (GTK+ titlebar).
Just remove the left-over assumption to make it work as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=702764
We need to update window->monitor on override_redirect windows as well, other
wise they may end up with an invalid struct which triggers and assert when
meta_window_is_monitor_sized is called.
https://bugzilla.gnome.org/show_bug.cgi?id=702564
Avoid a round trip to the xserver we already have the current position
anyway. Querying from the server on every move can cause the compositor to
stall during movement.
Add new api (meta_screen_get_current_monitor_for_pos and
meta_screen_get_current_monitor_info_for_pos) that allow querying the monitor
without a roundtrip by reusing the passed in cursor position.
gnome-shell needs to know whether the stage window is focused so
it can synchronize between stage window focus and Clutter key actor
focus. Track all X windows, even those without MetaWindows, when
tracking the focus window, and add a compositor-level API to determine
when the stage is focused.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
When we set the input focus, we first set the predicted window,
and then try to process focus events. But as XI_FocusOut on the
existing window comes before XI_FocusIn on the new window, we'll
see the focus out on the old window and think the focus is going
to nothing, which makes mutter think the prediction failed.
This didn't really matter as nothing paid attention to the focus
window changing, but with gnome-shell's focus rework, we'll try
and drop keyboard focus in events like these.
Fix this by making sure that we ignore focus window changes of our
own cause when updating the focus window field, by ignoring all
focus events that have a serial the same as the focus request or
lower. Note that if mutter doens't make any requests after the
focus request, this could be racy, as another client could steal
the focus, but mutter would ignore it as the serial was the same.
Bump the serial by making a dummy ChangeProperty request to a
mutter-controlled window in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=701017
We substract one from the unredirect counter when enable_unredirect_for_screen
gets called. It is an unsigned integer so substracting one from zero (which means enable) would overflow and thus keep it peramently enabled.
This should never happen because it means there is an unmatched
enable / disable pair somewhere. So in addition to fixing it add a
warning when this case gets triggered.
https://bugzilla.gnome.org/show_bug.cgi?id=701224
Commit 4f2bb583bf changed things so that the compositor used
clutter_threads_add_repaint_func_full (CLUTTER_REPAINT_FLAGS_POST_PAINT
to get after-paint notification and send _NET_WM_FRAME_DRAWN, but this
doesn't actually work, since Clutter will already have blocked for
VBlank before calling post-paint functions.
The result is that frame synced toolkits like GTK 3.8 will normally
only be able to draw every other frame.
Since ::paint doesn't work either, a new function
clutter_stage_set_paint_callback() has been added to Clutter
(and will be included in the 1.14 branch)
https://bugzilla.gnome.org/show_bug.cgi?id=698794
We have no need for normally reported events during grabs. In fact, it
might be harmful. A plugin might grab the keyboard through
meta_begin_modal_for_plugin() and then expect events to be reported to
the grab window they provide. If meanwhile this XIGrabDevice is
issued, events might start being reported normally to one other of our
windows breaking the plugin event processing.
In particular, on an empty workspace, we set input focus to our
no_focus_window. Then, if gnome-shell calls
meta_begin_modal_for_plugin() and meta_display_freeze_keyboard(), in
that order, input events will start being reported to no_focus_window.
There are two issues with this. One is that no_focus_window isn't
selecting for XI input events and thus the server discards them
completely. But even if that is fixed, events being reported to any
window other than the one gnome-shell expects - the clutter stage
window - means that events will stop reaching it.
https://bugzilla.gnome.org/show_bug.cgi?id=701219
This will make it possible to implement input source switching in
gnome-shell using the popular modifiers-only keybinding that's
implemented on the X server through an XKB option.
https://bugzilla.gnome.org/show_bug.cgi?id=697002
We'll use this in gnome-shell to freeze the keyboard right before
switching input source and unfreeze it after that's finished so that
we don't lose any key events to the wrong input source.
https://bugzilla.gnome.org/show_bug.cgi?id=697001
If a binding is updated with a clear set of strokes (effectively
disabling it) we aren't signaling that the binding changed and thus
the previous strokes will continue to be grabbed.
This fixes that and tries to do a better effort at checking if the
binding changed or not.
https://bugzilla.gnome.org/show_bug.cgi?id=697000
gnome-shell has traditionally just called XSetInputFocus when wanting to
set the input focus to the stage window, but this might cause strange,
hard-to-reproduce bugs because of an interference with mutter's focus
prediction. Add API to allow gnome-shell to focus the stage window that
also updates mutter's internal focus prediction state.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
If an app pops up an OR window and sets input focus to it, like
Steam does, we'll think the focus window is null, causing us to
think the app is not focused.
OR windows should not be special if they get input focus, where
the input focus would be set to NULL. Instead, the window should
be marked as focused.
https://bugzilla.gnome.org/show_bug.cgi?id=647706
Mutter previously defined display->focus_window as the window that the
server says is focused, but kept display->expected_focus_window to
indicate the window that we have requested to be focused. But it turns
out that "expected_focus_window" was almost always what we wanted.
Make MetaDisplay do a better job of tracking focus-related requests
and events, and change display->focus_window to be our best guess of
the "currently" focused window (ie, the window that will be focused at
the time when the server processes the next request we send it).
https://bugzilla.gnome.org/show_bug.cgi?id=647706
The hierarchy handling is handled in the shell by adding stuff
directly to the uiGroup, and we have a dedicated actor for
the overview there, so we don't need this anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
Make it a static function for now, but this will be a private
function soon, replacing meta_window_lost_focus. This should
contain no functional changes, only cosmetic indentation changes,
so best viewed with ignorews=1 or -w or -b, you know the drill.
https://bugzilla.gnome.org/show_bug.cgi?id=647706
Clients using _NET_WM_MOVERESIZE to start a drag operation may encounter
a race condition if the user presses and releases a mouse button very
fast, getting "stuck" in a grab state. While this is easily fixed with
the user pressing the button or hitting Escape as the EWMH spec suggests,
its's still a bit of annoyance for users.
After starting a grab operation, check that the button is actually pressed
by the client, and if not, cancel the grab operation. This prevents the
stuck grab in a race-free way, although it requires an extra round-trip
to the server.
With client-side decorations becoming more popular, the use of
_NET_WM_MOVERESIZE is on the rise, thus this bug is seen more frequently
than before.
https://bugzilla.gnome.org/show_bug.cgi?id=699777
As we only had one string-array preference so far, we didn't bother
with adding a generic way to handle string-array preferences, and
just handled the preference in question explicitly. However we are
going to parse another string-array setting, so generalize the
existing code to make it reusable for that case.
https://bugzilla.gnome.org/show_bug.cgi?id=700223
g-ir-scanner will emit more warnings regarding broken GTK-Doc
syntax in the near future, which due to --warn-error being used
would break the build:
'''
ui/theme.c:1883: Warning: Meta: missing ":" at column 20:
* @tokens_p: (out) The resulting tokens
^
g-ir-scanner: compile: gcc -Wall -Wno-deprecated-declarations ...
g-ir-scanner: link: /bin/sh ../libtool --mode=link --tag=CC gcc ...
libtool: link: gcc -o /home/dieterv/gnome.org/checkout/mutter/...
<unknown>:: Fatal: Meta: warnings configured as fatal
<unknown>:: Fatal: Meta: warnings configured as fatal
make[4]: *** [Meta-3.0.gir] Error 1
'''
https://bugzilla.gnome.org/show_bug.cgi?id=699636
This essentially just moves install_corners() from the compositor, through
the core, into the UI layer where it arguably should have been anyway,
leaving behind stub functions which call through the various layers. This
removes the compositor's special knowledge of how rounded corners work,
replacing it with "ask the UI for an alpha mask".
The computation of border widths and heights changes a bit, because the
width and height used in install_corners() are the
meta_window_get_outer_rect() (which includes the visible borders but not
the invisible ones), whereas the more readily-available rectangle is the
MetaFrame.rect (which includes both). Computing the same width and height
as meta_window_get_outer_rect() involves compensating for the invisible
borders, but the UI layer is the authority on those anyway, so it seems
clearer to have it do the calculations from scratch.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=697758
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This makes it a bit simpler for other functions on a MetaUIFrame to
get this information.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=697758
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
XUngrabKey() doesn't work for XI2 grabs and XI2 doesn't provide API
with similar functionality. As such, we have to refactor the code a
bit to be able to call XIUngrabKeycode() for each key binding, then
reload keybindings and finally grab the new ones.
https://bugzilla.gnome.org/show_bug.cgi?id=697003
compositor/meta-background.c:64: error: redefinition of typedef 'MetaBackgroundPrivate'
./meta/meta-background.h:51: error: previous declaration of 'MetaBackgroundPrivate' was here
A correctly constructed GtkStyleContext must have its screen
and widget paths set. Getting the frame font caused crashes
on some systems because those were not correctly initialised.
https://bugzilla.gnome.org/show_bug.cgi?id=696814
Right now we call unset_texture from MetaBackground's dispose method.
unset_texture assumes there's a pipeline available, but there may not
be if the object was just created.
This commit fixes that incorrect assumption.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
Cogl automatically caches pipelines with no eviction policy,
so we need to make sure to reuse snippets to prevent
identical pipelines from getting cached separately.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
g_task_propagate_pointer relinishes the GTask
of its reference to the propagated pointer, so we need to
unref it ourselves when we're done with it.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
In 97a4cc8c, we accidentally lost the check that kept us from
sending multiple configures to a window before it responds to
_NET_WM_SYNC_REQUEST. So _NET_WM_SYNC_REQUEST stopped working
properly. Add a check back with the same effect.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
During a resize, if we don't have a configure pending, then a counter
change shouldn't trigger anything other than the normal drawing:
it's just a spontaneous frame from the application. So don't try
to update the position or remove our timeout ID.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
ClutterBinLayout's get_preferred_width / get_preferred_height
doesn't respect fixed child positioning when calculating the
size of the layout, but does when allocating. This is absurdly
broken, but it's what we're given. Use a ClutterFixedLayout,
which doesn't have these issues.
https://bugzilla.gnome.org/show_bug.cgi?id=696089
Trying to track the fullscreen status outside of Mutter, as GNOME Shell
was doing previously, was very prone to errors, because Mutter has a
very tricky definition of when a window is set to be fullscreen and
*actually* acting like a fullscreen window.
* Add meta_screen_get_monitor_in_fullscreen() and an
::in-fullscreen-changed signal. This allows an application to
track when there are fullscreen windows on a monitor.
* Do the computation of fullscreen status in a "later" function that
runs after showing, so we properly take focus into account.
* To get ordering of different phases right, add more values
to MetaLaterType.
* Add auto-minimization, similar to what was added to GNOME Shell
earlier in this cycle - if a window is set to be fullscreen, but
not actually fullscreen, minimize.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
Since the tile mode is now always reset on maximize(), this code
no longer does anything (not to mention that side-by-side tiled
windows haven't snapped back for a while now).
https://bugzilla.gnome.org/show_bug.cgi?id=682779
We used to restore side-by-side tiling when unmaximizing, so we
kept the tile-mode during maximization. Since commit 10d53fc7d
there's no longer a good reason to do so, and it can result in
tile previews being shown erroneously on window drag operations
without motion (double-click on titlebar), so reset the tile
mode in maximize().
https://bugzilla.gnome.org/show_bug.cgi?id=682779
The tile preview is expected to be shown underneath the focus window.
However the code that restacks the preview broke when override-redirect
windows were moved to a separate window group.
To fix, special-case tile previews to put them in the NORMAL layer.
https://bugzilla.gnome.org/show_bug.cgi?id=696053
If _NET_WM_OPAQUE_REGION is set when the window is first mapped, the
initial load_properties will happen before the window actor is created,
and we'll have a call to meta_compositor_window_shape_changed. Just
fizzle this call out instead of doing anything fancy, as we'll pick
up the opaque region when the window actor is eventually created.
https://bugzilla.gnome.org/show_bug.cgi?id=695813
Previously, we were handling failure to respond to _NET_WM_SYNC_REQUEST
in the code path for throttling motion events. But this meant that
if a window didn't respond to _NET_WM_SYNC_REQUEST and there were no
motion events - for a keyboard resize, or after the end of the grab
operation - it would end up in a stuck state.
Use a separate per-window timeout to reliably catch the failure to respond
to _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
During resizing we froze window updates when configuring the
window, and unfroze the window updates when processing the
next resize. This wasn't absolutely reliable, because we might
not have a next resize. Instead tie window freezing more
directly to the current sync request value - a window is
frozen until it catches up with the last value we sent it
in _NET_WM_SYNC_REQUEST.
Testing with unresponsive clients showed that there was a bug
where window->disable_sync once set, would not actually disable
sync, but it *would* disable noticing that the client was
unresponsive for the next resize. Fix that by checking for
->disable_sync before sending _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
Window actors might be temporarily parented to intermediate actors during
effect, but we should not require that the plugin keeps track of stacking.
Rather, assume that the intermediate groups holds a whole stack, and
applying position within it.
https://bugzilla.gnome.org/show_bug.cgi?id=695711
When windows get redirected off screen, all that gets left behind
is black. We don't want to flicker black at startup, though.
This commit maps the overlay window early, before redirecting
toplevels, so they end up getting snapshotted onto the background
pixmap of the overlay window when the overlay window is mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=694321
Send a _NET_WM_FRAME_DRAWN for each newly created window, as required
by the specification. This avoids a race where a window might be created
frozen but already unfrozen by the time we first see fetch the
counter value.
Remove a duplicate call to meta_compositor_set_updates_frozen() which
was called before the MetaWindowActor is created and hence did nothing.
https://bugzilla.gnome.org/show_bug.cgi?id=694771
mutter currently only filters the overlay key through the shell
when there is a grab operation and that grab operation belongs to the
shell (because the shell is pushModal'd). This means the shell can't
filter out overlay key press events events at startup (since the shell
isn't normally modal).
This commit changes the code to always run the shell filtering code,
even when the shell is not modal.
https://bugzilla.gnome.org/show_bug.cgi?id=694837
The background vignette currently fits itself to the painted
texture, instead of the monitor. This causes some very
wrong looking drawing for backgrounds that don't fill the screen.
This commit reworks the vignette shader code to be clearer, more
correct, and parameterized so that it knows how to scale and
position the vignette.
https://bugzilla.gnome.org/show_bug.cgi?id=694393
The WALLPAPER style of background painting currently
draws starting in the upper left corner of each monitor.
This isn't really correct, it means the seam between
monitors doesn't match up and edges look unbalanced if
the tile isn't a multipe of monitor size.
Really, the tiles should be centered in the middle of
the screen. (Just like when tiling a bathroom floor,
tiles should start in the center of the room.)
This commit reworks the math to make that happen.
https://bugzilla.gnome.org/show_bug.cgi?id=694393
Commit 4f2bb583bf started to use a clutter_threads_add_repaint_func_full
callback instead of connecting to the stage's paint signal.
The callback has to return TRUE if it wants to be called again, so fix that
as we want to call it for every frame (otherwise apps supporting the WM SYNC
protocol will stop drawing).
https://bugzilla.gnome.org/show_bug.cgi?id=695006
Doing so causes useless full stage redraws and breaks culling
as clutter cannot know how the signal handler affects painting.
So use clutter_threads_add_repaint_func_full with the
CLUTTER_REPAINT_FLAGS_POST_PAINT flag instead.
https://bugzilla.gnome.org/show_bug.cgi?id=694988
gnome-shell shouldn't announce to the session manager it's
"ready" until it's fully initialized. It currently tells
the session manager it's ready as soon as it hits the main
loop. This causes nautilus in classic mode to start before
we have workspaces initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=694876
During compositor grabs, all global keybindings that don't go
through mutter's keybinding system are blocked. To allow other
processes to make use of it, gnome-shell will expose a simple
grab API on DBus; for this, add API to grab key combos directly
instead of parsing accelerators stored in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=643111
There is currently code to try to fill gradients in a
hardware native format, using #ifdefs. That optimization is
unimportant since gradients only use 2 byte buffers. It's
also incorrect because it's getting the channel order wrong
at buffer initialization time.
This commit drops the ifdefs for clarity and fixes the
channel order.
https://bugzilla.gnome.org/show_bug.cgi?id=694641
meta_screen_get_monitor_for_rect will return the monitor that
a given rect belongs in (choosing the "best" monitor based on
overlap, if there are overlapping monitors).
It doesn't work with 0x0 rects, though.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=694725
meta_window_is_remote compares a cached copy of the system hostname
with the hostname of the client window
(as presented by the WM_CLIENT_MACHINE property).
Of course, the system hostname can change at any time, so caching
it is wrong. Also, the WM_CLIENT_MACHINE property won't necessarily
change when the system hostname changes, so comparing it with the
new system hostname is wrong, too.
This commit makes the code call gethostname() at the time
WM_CLIENT_MACHINE is set, check whether it's remote then, and cache
that value, rather than comparing potentially out of sync hostnames
later.
https://bugzilla.gnome.org/show_bug.cgi?id=688716
Background handling in GNOME is very roundabout at the moment.
gnome-settings-daemon uses gnome-desktop to read the background from
disk into a screen-sized pixmap. It then sets the XID of that pixmap
on the _XROOTPMAP_ID root window property.
mutter puts that pixmap into a texture/actor which gnome-shell then
uses.
Having the gnome-settings-daemon detour from disk to screen means we
can't easily let the compositor handle transition effects when
switching backgrounds. Also, having the background actor be
per-screen instead of per-monitor means we may have oversized
textures in certain multihead setups.
This commit changes mutter to read backgrounds from disk itself, and
it changes backgrounds to be per-monitor.
This way background handling/compositing is left to the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=682427
actor_is_untransformed is a function meta-window-group uses to determine
if an actor is relatively pixel aligned and not contorted. It then
returns the coordinates of the actor.
In a subsequent commit will need the function in a different file, so
this commit separates it out.
https://bugzilla.gnome.org/show_bug.cgi?id=682427
Window menus use the first key combination for a binding to show the
acceleration, so the list must be in the right configured order, which
is the opposite of what's built by g_slist_prepend()
https://bugzilla.gnome.org/show_bug.cgi?id=694045
