Commit Graph

16 Commits

Author SHA1 Message Date
Emmanuele Bassi
eade1ab19e test-rotate: Remove the behaviour code
Use a looping animation with a shared timeline instead.
2010-11-18 15:21:16 +00:00
Emmanuele Bassi
a35708eb74 Deprecate ClutterBehaviour and sub-classes
The Behaviour class and its implementations have been replaced by the
new animation framework API and by the constraints for layout-related
animations.

Currently, we need to make tests build, so we undef DISABLE_DEPRECATED
in specific test cases while they get ported.
2010-11-18 15:21:16 +00:00
Emmanuele Bassi
6ed6b2a54b Move tests to static colors where possible 2010-11-11 13:14:39 +00:00
Emmanuele Bassi
8583986e16 blur-effect: Fix loop unrolling
The box blur shader was not sampling all the points for producing the
desired effect.
2010-06-07 15:45:24 +01:00
Emmanuele Bassi
aef2f805a6 effects: Fix stacking of offscreen-based effects
Stacking multiple effects sub-classing ClutterOffscreenEffect requires
a small fix in the code that computes the screen coordinates of the
actor to position the FBO correctly with regards to the stage.
2010-06-03 14:10:55 +01:00
Emmanuele Bassi
8ef4d9fe21 actor: Add "effects" to the animatable metas
Since ClutterEffect is an ActorMeta it should be possible to animate the
properties of named effects using the @effects syntax, just like it
happens for actions and constraints.
2010-06-03 14:10:55 +01:00
Emmanuele Bassi
73a773d37a effect: Add DesaturateEffect
A simple shader-based effect that desaturates an actor and its contents
based on a controllable factor.
2010-06-03 14:10:55 +01:00
Emmanuele Bassi
a86f1b45bb Add the ClutterEffect abstract class
ClutterEffect is an abstract class that should be used to apply effects
on generic actors.

The ClutterEffect class just defines what an effect should implement; it
could be defined as an interface, but we might want to add some default
behavior dependent on the internal state at a later point.

The effect API applies to any actor, so we need to provide a way to
assign an effect to an actor, and let ClutterActor call the Effect
methods during the paint sequence.

Once an effect is attached to an actor we will perform the paint in this
order:

  • Effect::pre_paint()
  • Actor::paint signal emission
  • Effect::post_paint()

Since an effect might collide with the Shader class, we either allow a
shader or an effect for the time being.
2010-06-03 14:10:55 +01:00
Emmanuele Bassi
0b4899ef23 tests: Clean up interactive test build
The build for interactive tests creates symbolic links for the data
under tests/data; it also uses symbolic links for creating "binaries"
for each interactive test. This is less than ideal, though.

Instead, the tests should build a path to the data files by using
a pre-processor define like TESTS_DATADIR; both g_build_filename() and
pre-processor string concatenation can be used to generate a valid
file name with the full path to the files.

The build system should also create wrapper scripts, just like we
do inside the conformance test suite, to be able to launch single
tests.
2009-11-05 17:47:26 +00:00
Neil Roberts
9c7afe0c5b [timeline] Remove the concept of frames from timelines
Timelines no longer work in terms of a frame rate and a number of
frames but instead just have a duration in milliseconds. This better
matches the working of the master clock where if any timelines are
running it will redraw as fast as possible rather than limiting to the
lowest rated timeline.

Most applications will just create animations and expect them to
finish in a certain amount of time without caring about how many
frames are drawn. If a frame is going to be drawn it might as well
update all of the animations to some fraction of the total animation
rather than rounding to the nearest whole frame.

The 'frame_num' parameter of the new-frame signal is now 'msecs' which
is a number of milliseconds progressed along the
timeline. Applications should use clutter_timeline_get_progress
instead of the frame number.

Markers can now only be attached at a time value. The position is
stored in milliseconds rather than at a frame number.

test-timeline-smoothness and test-timeline-dup-frames have been
removed because they no longer make sense.
2009-06-04 13:21:57 +01:00
Emmanuele Bassi
c759aeb6a7 Uniformly use floats in Actor properties
All the underlying implementation and the public entry points have
been switched to floats; the only missing bits are the Actor properties
that deal with positioning and sizing.

This usually means a major pain when dealing with GValues and varargs
functions. While GValue will warn you when dealing with the wrong
conversions, varags will simply die an horrible (and hard to debug)
death via segfault. Nothing much to do here, except warn people in the
release notes and hope for the best.
2009-06-01 14:57:18 +01:00
Emmanuele Bassi
9cf02bfdb9 [text] Rename :alignment to :line-alignment
The :alignment property is prone to generate confusion: developers
will set it thinking that the contents of a ClutterText will
automagically align themselves.

Instead of using the generic term :alignment, and following the
GTK+ convention, we should use a more specific term, conveying the
actual effect of the property: alignment of the lines with respect
to each other, and not to the overall allocated area.

See bug 1428:

  http://bugzilla.openedhand.com/show_bug.cgi?id=1428
2009-02-05 19:54:48 +00:00
Emmanuele Bassi
74213e0ee3 [alpha] Allow registering alpha functions
In order to unify alpha functions and animation modes in ClutterAlpha
we should be able to register alpha functions and get a logical id
for them; the logical id will then be available to be used by
clutter_alpha_set_mode().

The registration requires API changes in ClutterAlpha constructors
and methods. It also provides the chance to shift ClutterAlpha
towards the use of animations modes only, and to alpha functions
as a convenience API for language bindings alone.
2009-01-16 14:37:35 +00:00
Emmanuele Bassi
5c14044e52 Update the interactive tests to ClutterText
Instead of using ClutterLabel, use ClutterText to display some
text where needed.
2008-12-11 13:48:01 +00:00
Emmanuele Bassi
62844d5f04 2008-11-17 Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1014 - Clutter Animation API Improvements

	* clutter/Makefile.am:
	* clutter/clutter.h: Update the build

	* clutter/clutter-types.h: Add AnimationMode, an enumeration
	for easing functions.

	* clutter/clutter-alpha.[ch]: Add the :mode property to
	control the function bound to an Alpha instance using an
	enumeration value. Also add six new alpha functions:

		- ease-in, ease-out, ease-in-out
		- sine-in, sine-out, sine-in-out

	* clutter/clutter-deprecated.h: Deprecate the #defines for
	the alpha functions. They will be replaced by entries in the
	ClutterAnimationMode.

	* clutter/clutter-interval.[ch]: Add ClutterInterval, an
	object for defining, validating and computing an interval
	between two values.

	* clutter/clutter-animation.[ch]: Add ClutterAnimation, an
	object responsible for animation the properties of a single
	actor along an interval of values. ClutterAnimation memory
	management is automatic. A simple wrapper method for
	ClutterActor is provided:

		clutter_actor_animate()

	which will create, or update, an animation for the passed
	actor.

	* clutter/clutter-debug.h:
	* clutter/clutter-main.c: Add a new 'animation' debug note.

	* clutter/clutter-script.c: Clean up the alpha functions
	whitelist, and add the new functions.

	* doc/reference/clutter/Makefile.am:
	* doc/reference/clutter/clutter-sections.txt: Update the
	API reference.

	* doc/reference/clutter/clutter-animation.xml: Renamed to
	doc/reference/clutter/clutter-animation-tutorial.xml to
	avoid clashes with the ClutterAnimation section.

	* doc/reference/clutter/clutter-docs.sgml: Renamed to
	doc/reference/clutter/clutter-docs.xml, as it was an XML
	file and not a SGML file.

	* tests/Makefile.am:
	* tests/interactive/Makefile.am:
	* tests/interactive/test-animation.c:
	* tests/interactive/test-easing.c: Add two tests for the
	new simple animation API and the easing functions.

	* tests/interactive/test-actors.c:
	* tests/interactive/test-behave.c:
	* tests/interactive/test-depth.c:
	* tests/interactive/test-effects.c:
	* tests/interactive/test-layout.c:
	* tests/interactive/test-multistage.c:
	* tests/interactive/test-paint-wrapper.c:
	* tests/interactive/test-rotate.c:
	* tests/interactive/test-scale.c:
	* tests/interactive/test-texture-quality.c:
	* tests/interactive/test-threads.c:
	* tests/interactive/test-viewport.c: Update interactive tests
	to the deprecations and new alpha API.
2008-11-18 09:50:03 +00:00
Robert Bragg
603f936745 Bug 1162 - Re-works the tests/ to use the glib-2.16 unit testing
framework

	* configure.ac:
	* tests/*:
	The tests have been reorganised into different categories: conformance,
	interactive and micro benchmarks.
	- conformance tests can be run as part of automated tests
	- interactive tests are basically all the existing tests
	- micro benchmarks focus on a single performance metric

	I converted the timeline tests to conformance tests and also added some
	tests from Neil Roberts and Ebassi.

	Note: currently only the conformance tests use the glib test APIs,
	though the micro benchmarks should too.

	The other change is to make the unit tests link into monolithic binaries
	which makes the build time for unit tests considerably faster. To deal
	with the extra complexity this adds to debugging individual tests I
	have added some sugar to the makefiles so all the tests can be run
	directly via a symlink and when an individual test is run this way,
	then a note is printed to the terminal explaining exactly how that test
	may be debugged using GDB.

	There is a convenience make rule: 'make test-report', that will run all
	the conformance tests and hopefully even open the results in your web
	browser. It skips some of the slower timeline tests, but you can run
	those using 'make full-report'
2008-11-07 19:32:28 +00:00