For historical reasons meta_monitor_is_active() checked whether it is
active by checking whether the main output have a CRTC assigned and
whether that CRTC has a current mode. At a later point, the MetaMonitor
got its own mode abstraction (MetaMonitorMode), but
meta_monitor_is_active() was never updated to use this.
An issue with checking the main output's CRTC state is that, if there is
some CRTC mode combination that for some reason isn't properly detected
by the MetaMonitorMode abstraction (e.g. some tiling configuration not
yet handled), meta_monitor_is_active() would return TRUE, even though no
(abstracted) mode was set. This would cause confusion here and there,
leading to NULL pointer dereferences due to the assumption that if a
monitor is active, it has an active mode.
Instead, change meta_monitor_is_active() to directly check the current
monitor mode, and log a warning if the main output still happen to have
a CRTC with a mode assigned to it. This way, when an not undrestood CRTC
mode combination is encountered, instead of dereferencing NULL pointers,
simply assume the monitor is not active, which means that it will not be
managed or rendered by mutter at all.
https://gitlab.gnome.org/GNOME/mutter/issues/130
When a transient window is destroyed, the expected behavior is that
focus is passed to the ancestor if possible. This was broken for
quite a while until the previous commit, so add a test case to make
sure it doesn't happen again.
https://gitlab.gnome.org/GNOME/mutter/issues/15
Since commit b3b9d9e16 we no longer have to pass the unmanaging window
to make sure we don't try to focus it again, however the parameter also
influences the focus policy by giving ancestors preference over the normal
stack order.
https://gitlab.gnome.org/GNOME/mutter/issues/15
We refuse to move focus while a grab operation is in place. While this
generally makes sense, there's no reason why the window that owns the
grab shouldn't be given the regular input focus as well - we pretty
much assume that the grab window is also the focus window anyway.
In fact there's a strong reason for allowing the focus change here:
If the grab window isn't the focus window, it probably has a modal
transient that is focused instead, and a likely reason for the focus
request is that the transient is being unmanaged and we must move
the focus elsewhere.
https://gitlab.gnome.org/GNOME/mutter/issues/15
Avoid exporting through org.gnome.Mutter.DisplayConfig.GetCurrentState
excessively-low screen resolutions setting both a minimum width and a minimum
height. GetCurrentState is e.g. used by Gnome Control Center to build a list of
selectable resolutions.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=793223
If a client asks for xdg-output before we have set the output's logical
monitor, we would end up crashing with a NULL pointer dereference.
Make sure we clear the resource's user data when marking an output as
inert on monitor change so that we don't end up with a Wayland output
without a logical monitor.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/194
If drmModeSetCrtc() is called with no fb, mode or connectors for some
CRTC it may still fail, and we should handle that gracefully instead of
assuming it failed to set a non-disabled state.
Closes https://gitlab.gnome.org/GNOME/mutter/issues/70
meta_window_wayland_update_main_monitor() would skip the monitor update
if the difference in scale between the old and the new monitor would
cause another monitor change.
While this is suitable when the monitor change results from a user
interactively moving the surface between monitors of different scales,
this can leave dangling pointers to freed monitors when this is
triggered by a change of monitor configuration.
Make sure we update the monitor unconditionally if not from a user
operation.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/189
Add API to let GNOME Shell have the ability to get notified about remote
access sessions (remote desktop, remote control and screen cast), and
with a way to close them.
This is done by adding an abstraction above the remote desktop and
screen cast session objects, to avoid exposing their objects to outside
of mutter. Doing that would result in external parts holding references
to the objects, complicating their lifetimes. By using separate wrapper
objects, we avoid this issue all together.
The docs previously suggested that `cogl_frame_info_get_frame_counter`
returned a timestamp of an unknown clock ID. That's not correct. The
cogl source code shows that it does and must use the same clock as
`cogl_get_clock_time`.
Related to https://gitlab.gnome.org/GNOME/mutter/issues/131
This test aims at checking that the transient relationship set using the
xdg-foreign API is respected by mutter and that no crash occurs, such as
the one in issue !174.
Note: the crash from issue !174 occurs only if "attach_modal_dialogs" is
set, so one has to change that default value to "true" to be able to
trigger the crash:
gsettings set org.gnome.mutter attach-modal-dialogs true
Related: https://gitlab.gnome.org/GNOME/mutter/issues/174
Add a "set_parent_exported" command to test the xdg-foreign support, so
that we can add a test which uses the GDK API for exported window:
`gdk_wayland_window_set_transient_for_exported()`
That will allow to detect if transient is applied correctly between
foreign windows and detect possible crashes such as issue !174.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/174
Monitor whether UPower is running ourselves. That allows us to keep the
same value for "lid-is-closed" throughout the process of UPower
restarting, preventing unwanted monitor re-configuration through the process.
Fixes another screen black out when UPower restarts and the laptop lid
is closed.
Rather than handle UpClient in both MetaBackend (to reset the idletime
when the lid is opened), and in MetaMonitorManager and
MetaMonitorConfigManager (to turn the screen under the lid on/off
depending on its status), move the ability to get the lid status from
UPower or mock it in one place, in MetaBackend.
Restarting UPower will make every property of UpClient emit a "notify"
signal (as a GDBusProxy would). Avoid mutter reconfiguring the displays
when upower restarts by caching the last known value of "lid-is-closed"
and only reconfiguring the displays if it actually changed.
This fixes a black out of the screen when UPower restarts.
Previously we relied on the test-client to make sure that a window was
shown. For X11, we did not need to do anything, but for Wayland we had
to make sure we had drawn the first frame, otherwise mutter wouldn't
have a buffer making the window not showable.
Doing it this way doesn't work anymore however, since the 'after-paint'
event will be emitted even if we didn't actually paint anything. This is
the case with current Gtk under Wayland, where we won't draw until the
compositor has configured the surface. In effect, this mean we'll get a
dummy after-paint emission before the first frame is actually painted.
Instead, move the verification that a "show" command has completed by
having the test-runner wait for a "shown" signal on the window, which is
emitted in the end of meta_window_show(). This requires an additional
call to gdk_display_sync() in the test-client after creating the window,
to make sure that the window creation vents has been received in the
compositor.
As of "stack-tracker: Keep override redirect windows on top"
(e3d5bc077d), we always sorted all
override redirect on top of regular windows, as so is expected by
regular override redirect windows. This had an unwanted consequence,
however, which is that we should still not sort such override redirect
windows on top if they are behind the guard window, as that'd result in
windows hidden behind it now getting restacked anyway.
Fix this by only sorting the override redirect windows that are found
above the guard window on top. This fixes the override-redirect stacking
test.
The special ::pick implementation there makes clutter fall into paths
that do require a get_paint_volume() implementation, or an infinite
area will be used.
Providing a paint volume here is easier on the invalidation mechanism.
This optimization was presumably added before Clutter was able to
invalidate selected regions of an actor. Paint volumes are supposed
to be invariable as long as the actor conditions don't change.
Stacking of other actors shouldn't affect the paint volume, so it's
actually wrong to optimize those areas away here.
The framerate for screen cast sources was set to variable within 1 FPS
and the framerate of the monitor being screen casted. This meant that if
the sink didn't match the framerate (e.g. had a lower max framerate),
the formats would not match and a stream would not be established.
Allow letting the sink clamp the framerate range by setting it as
'unset', allowing it to be negotiated.
The PipeWire master branch saw some backports from the work branch,
including API changes making the 0.1 series more aligned with future
plans. Make mutter use the new API. This is needed to avoid dead locks
that existed in the older version.
xdg-foreign clears the `transient_for` of a modal dialog when its
imported parent is destroyed, which would later cause a crash in
`constrain_modal_dialog()` because the transient `NULL`.
So in case a modal dialog has no parent, do not try to constrain it
against its parent.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/174
The test fix in commit 859bea629b broke distcheck, probably because
abs_srcdir is prefixed with a relative $BUILDROOT. Hopefully this is
the last autotools breakage before switching to meson, so don't
bother investigating too much ...
Force update the cursor renderer after theme or size changes; otherwise
we'll be stuck with the old theme and/or size until something else
triggers resetting of the cursor.
MetaDisplay still had workspace signals, but nothing emitted them,
meaning we wouldn't get warnings if handlers were added there instead
of to MetaWorkspaceManager.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
If we wait with opening the X11 window decoration GDK connection, we
might end up with a terminated X11 server before we finish
initializing, depending on the things happening after spawning Xwayland
and before opening the MetaX11Dispaly. In gnome-shell, this involves
e.g. creating a couple of temporary X11 connections, and on disconnect,
if they happen to be the last client, the X server will terminate
itself.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
Under Xorg the cursor size preference was pre-scaled originating from
gtk, while with Wayland it came directly from GSettings remaining
unscaled. Under Xwayland this caused the X11 display code to set the
wrong size with HiDPI configurations, which was often later overridden
by the equivalent code in gtk, but not always.
Fix this by always having the cursor size preference unscaled, scaling
the size correctly where it's used, depending on how it's used.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
