ClutterBoxLayout's layout policy of using the generic ClutterActor
align/expand properties for children that are expanded and a custom
meta otherwise is confusing, in particular as the x-fill/y-fill
defaults don't match the default CLUTTER_ACTOR_ALIGN_FILL align.
StBoxLayout's own custom child meta (which was deprecated last
cycle) is probably the only consumer. And luckily, the St meta
uses different x-fill/y-fill default that match the ClutterActor
defaults, so removing it will not affect code that doesn't use
the deprecated properties themselves.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1265
This stuff has been deprecated for a very long time, and given that
ClutterBoxLayout is most commonly used via StBoxLayout, the impact of
removing it should be low. It will however open the door to further
cleanups.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1265
We're going to remove the "allocation-changed" signal from ClutterActor
since it's no longer needed now that ClutterAllocationFlags are gone.
So listen to "notify-allocation" instead, which has been the recommended
thing to do for some time now anyway.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1245
The ABSOLUTE_ORIGIN_CHANGED allocation flag is only really useful to
propagate the information of the absolute origin of an actor having
changed inside Clutter. It wasn't used anywhere else besides for some
debug messages and it probably shouldn't be used in custom layout
implementations anyway since 1) actors shouldn't have to be aware of
absolute allocation changes and 2) it doesn't factor in changes to the
transformation matrix of a parent.
Also the propagation of absolute origin changes using this flag broke
with commit 0eab73dc2e and now hidden actors are no longer notified
about those changes.
Additionally, this flag gets in the way of a few potential optimizations
since it has to be propagated even if the allocation box of the child
hasn't changed, forcing a reallocation of the child.
So replace this flag with a simple new private property of ClutterActor
absolute_origin_changed, but keep the exact same behavior for now.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1245
Since we now only layout the children ourselves in case the actor
implementation doesn't override the allocate vfunc, we can remove
clutter_actor_maybe_layout_children() and move the functionality inside
clutter_actor_real_allocate().
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1245
Now that we no longer have the DELEGATE_LAYOUT we expect all actors
overriding the allocate() vfunc to allocate their children themselves.
Since clutter_actor_set_allocation() is only called from custom
vfunc_allocate() implementations, the condition in
clutter_actor_maybe_layout_children() would always fail, which makes
calling the function useless anyway.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1245
The CLUTTER_DELEGATE_LAYOUT flag is unintuitive and makes the allocation
process inside Clutter unnecessarily complicated. It's very easy for
actors overriding the allocate() vfunc to layout their children
themselves (in fact most of them do this), and it also never made sense
that clutter_actor_set_allocation() does eventually layout children.
There was no ClutterActor implementation in mutter or gnome-shell which
actually used the DELEGATE_LAYOUT flag, but even without it, it's fairly
easy to archive the same behavior now: In the allocate() override,
adjust the allocation as wanted, then chain up to the parent vfunc
without calling clutter_actor_set_allocation().
So remove the CLUTTER_DELEGATE_LAYOUT flag, which will allow making the
relayout code in Clutter a bit easier to follow.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1245
We're going to remove allocation flags, so stop depending on the
DELEGATE_LAYOUT flag in ClutterStage and call
clutter_layout_manager_allocate() directly, which is pretty
straightforward.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1245
The public API to get the parent actor, clutter_actor_get_parent() does
a type check whether the actor is actually a ClutterActor. In case of
_clutter_actor_apply_relative_transformation_matrix(), which is called
recursively and very often during the paint process, this type check
shows up with almost twice the amount of hits than the actual matrix
multiplication.
So use the parent pointer directly in some code paths that are executed
very often and avoid the expensive type checking there, we can do that
since both places are not public API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1259
Reverting the scale and offset applied to the damage history can be done
in one step, using a few less temporary allocations by passing the
offset right away to a new scale_offset_and_clamp_region() function.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1113
Since the damage history region is tracked per-view, all the regions it
includes should be inside the current view anyway, so don't
unnecessarily intersect that region with the view.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1113
Since we now check for the buffer age before setting up the
fb_clip_region, that region will be set to the full extents of the view
in case the buffer age is invalid. This in turn means we don't have to
do this again later and can simply fill the damage history with the
fb_clip_region that's already set for us.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1113
Since a NULL redraw_clip means that a full view redraw should be done
and an empty redraw clip may never be set (see the width/height checks
in clutter_stage_view_add_redraw_clip()), the fb_clip_region should
always be set to a reasonable region that's either the whole view or
individual regions inside the view.
So make sure that's actually the case by warning and that the
fb_clip_region isn't empty, which allows dropping another few lines of
code.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1113
Right now we're checking for the DISABLE_CLIPPED_REDRAWS debug flag
after creating the fb_clip_region and adjusting the redraw_clip. That
means that if may_use_clipped_redraw was TRUE, the redraw_clip will
still be set to the region and thus cause the stage to only be partially
redrawn. Since we don't push a clip to the framebuffer though
(use_clipped_redraw is now FALSE), parts of the view will get corrupted.
To fix that, disable clipped redraws right away if the debug flag is
set. This also allows removing the may_use_clipped_redraw bool and
replacing it entirely with use_clipped_redraw.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1113
We already have a better way to paint the redraw clip: Painting the
damage region paints the individual rects of the clip region and not
only the bounding rect.
So stop painting an outline around the redraw clip bounding rect when
CLUTTER_DEBUG_REDRAWS is set.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1113
While this is meant as an optimzation to only use the scissor clip and
not the stencil buffer if there's only one clip rectangle, it's not
needed since this optimization is going to be applied to region clips
anyway inside _cogl_clip_stack_gl_flush() (see cogl-clip-stack-gl.c).
So remove the unnecessary optimization here and rely on cogl-clip-stack
to do it for us.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1113
This was introduced with commit 9ab338d7b6 because the clipping of
fractionally scaled redraws caused glitches, it seems like this is no
longer needed nowadays, so let's remove it.
This should make obscured region culling work a bit better for
fractionally scaled framebuffers because because we overdraw a slightly
smaller region than the actually damaged one. We still do overdraw
though since the clipping region is stored using integers and thus
any non-integer values have to be extended to the bounding rect.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1113
It doesn't make sense to set the redraw clip when painting the stage if
clipped redraws are disabled. That's because when visualizing the redraw
clip and any new redraws are clipped, the old visualiziations would
remain visible, leaving multiple confusing rectangles on the screen.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1113
This removes ClutterAnimation and related tests. ClutterAnimation has
been deprecated for a long time, and replacements exist and are used by
e.g. GNOME Shell since a while back.
This also disables a few relatively unrelated interactive tests, as they
rely on ClutterAnimation to implement some animations they use to
illustrate what they actually test.
As interactive tests currently are more or less untestable due to any
interaction with them crashing, as well as they in practice means
rewriting the tests using non-deprecated animation APIs, they are not
ported right now. To actually port the interactive tests, it needs to be
possible to fist interact with them.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1192
In the past, it was a odd mix of possible different types, all coalesced
into an unsigned integer. Now, hovewer, it's always a
ClutterAnimationType, so lets change the name of getter, setter and
property to what it really is.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1192
The CLUTTER_ACTOR_IN_REPARENT and the CLUTTER_IN_REPARENT flag are never
set and the logic for skipping unmap, unrealize and the emission of the
"parent-set" signal during reparents has been solved differently by
leaving out the CHECK_STATE and EMIT_PARENT_SET flags when calling
add_child_internal() and remove_child_internal().
The only place where those REPARENT flags are theoretically still useful
is in the clutter_actor_verify_map_state() debugging function, but that
is never called during reparent anyway, so simply leave the comment
regarding reparent there.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1228
The redraw clip that's painted together with the damage region has to be
copied earlier than we do right now. That's because if
PAINT_DAMAGE_REGION is enabled, buffer age is disabled and thus
use_clipped_redraw is FALSE. That means the redraw_clip is updated and
set to the full view-rect. If we copy the queued_redraw_clip after that,
it's also going to be set to the full view-rect. So copy the redraw clip
a bit earlier to make sure we're actually passing the real redraw clip
to paint_damage_region().
Also keep the queued_redraw_clip around a bit longer so it can actually
be used by paint_damage_region() and isn't freed before that.
While at it, move paint_damage_region() from swap_framebuffer() into
clutter_stage_cogl_redraw_view() so we don't have to pass things to
swap_framebuffer() only for debugging.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1104https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1208
It takes coordinates in stage coordinate space, and will result in
a screen cast stream consisting of that area, but scaled up by the scale
factor of the view that overlaps with the area and has the highest scale
factor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1207
Will be used by the stage to not paint the overlays. We skip all
overlays since overlays are only ever used for pointer cursors when the
hardware cursors cannot or should not be used.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1207
Either onto a framebuffer, or into a CPU memory buffer. The latter will
use an former API and then copy the result to CPU memory. The former
allocates an offscreen framebuffer, sets up the relevant framebuffer
matrices and paints part of the stage defined by the passed rectangle.
This will be used by a RecordArea screen cast API. The former to paint
directly onto PipeWire handled dma-buf framebuffers, and the latter for
PipeWire handled shared memory buffers.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1207
A paint flag affects a paint operation in ways defined by the flags.
Currently no flags are defined, so no semantical changes are defined
yet. Eventually a flag aiming to avoid painting of cursors is going to
be added, so that screen cast streams can decide whether to include a
cursor or not.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1207
Try to bypass compositing if there is a fullscreen toplevel window with
a buffer compatible with the primary plane of the monitor it is
fullscreen on. Only non-mirrored is currently supported; as well as
fullscreened on a single monitor. It should be possible to extend with
more cases, but this starts small.
It does this by introducing a new MetaCompositor sub type
MetaCompositorNative specific to the native backend, which derives from
MetaCompositorServer, containing functionality only relevant for when
running on top of the native backend.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
Make it possible to cause the next frame to scan out directly from the
passed CoglScannout. This makes it possible to completely bypass
compositing for the following frame.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
Transitions are used for animating actors when e.g. going from/to
fullscreen, and the like. We need to know such things when deciding
whether to avoid compositing a window actor, so make add API visible to
mutter that checks whether there are any transitions active.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/798
click_action_query_long_press() can potentially schedule more than
one timeout, since it doesn't clear any already-existing timeout.
Make sure to clear the long press timeout before scheduling a new
one.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1188
Like the click action, it makes sense to cancel the ongoing gesture
when the action is disabled. Do so by overriding our new friend,
ClutterActorMeta.set_enabled, and canceling the gesture when disabling
the action.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1188
ClutterClickAction, like other actions, can potentially be disabled
at any time (that is not during painting). When that happens with
ClutterClickAction, it must release all timeouts and disconnect from
the stage's 'capture-event'.
Override ClutterActorMeta.set_enabled and release the click action
when the action is being disabled.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1188
