On Wayland a window actor may have more than one surface actor,
most importantly when subsurfaces are used.
Add a new function to request the one which is at the top -
it will be used in the next commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2211>
When rendering to a buffer that is not the stage view buffer, we can not
know where the buffer will be displayed on the screen. As a result we
also can not know what translation would need to be applied to culling.
This was causing glitches when the gnome-shell magnifier was applying
offscreen effects. ClutterOffscreenEffect causes MetaWindowGroup to be
rendered to an offscreen buffer at an offset, because it draws to a
slightly larger texture with an accordingly translated origin. This
translation then later is canceled out again when the offscreen buffer
is drawn. To meta_actor_painting_untransformed() however which only sees
the translation used when drawing to the buffer this looked like the
window group was being rendered at the offset. This then lead to
redraw_clip getting translated accordingly, resulting in wrong
coordinates used for culling.
Similarly this was leading to issues when taking area screenshots while
at 1x zoom.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1678
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4876
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2080>
Since the completion callback (on_switch_workspace_effect_complete) sets
priv->tml_switch_workspace1 to NULL, the unref was trying to unref NULL,
and the reffed ClutterTimeline was not getting unreffed.
This could be triggered by rapidly switching workspaces, switching again
before the animation of the initial switch was done.
Found while working on #2038.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2120>
This can happen if a texture was newly assigned to the actor, but the
unobscured region hasn't been updated yet. Without bailing here, the
actor would display correctly via direct scanout, but other parts of
mutter would continue considering it obscured, which would e.g. result
in no frame callbacks getting sent for its surface.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1636
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2112>
Previously we chose to only anti-alias texels inside the boundary
(`clip_radius - 1.0`) but zoomed in you could see it was slightly smaller
than the correct curve (#2024).
Similarly if you choose to only anti-alias texels outside that edge
(`clip_radius + 1.0`) then you'd get an overly convex curve that doesn't
match up with the straight line sections.
So now we anti-alias texels that intersect the circle boundary, regardless
of which side they are mostly on. For efficiency we define "intersect" to
mean any texel whose center is within 0.5 of the theoretical edge.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2024
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2102>
When grabbing the devices, there's no error paths that would quit
late enough that both pointer and keyboard would need ungrabbing,
so the keyboard checks were dead code.
Fix this by dropping the boolean variable checks, and adding goto
labels to unroll the operation properly at every stage.
CID: #1418254
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2061>
Analogous to `get_image()` this returns a `ClutterContent` for a
given `MetaWindowActor`. This can be used to implement window
effects without a roundtrip from GPU to CPU memory.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1893>
We fetch a frame clock that we schedule update on when queuing
_NET_WM_FRAME_DRAWN events. In some situations this frame clock is the
one from the stage, and if there are multiple hotplugs in a row, we
failed to update it as there were no stage views changes on the window
actor itself. As an actor updates the stage views list on layout, When a
queue_frame_drawn() call was done (typically from an X11 event) after a
second hotplug, it'd attempt to schedule an update on the frame clock
from the previous hotplug, as it didn't get notified about any
stage-views changes since for itself there was none.
Fix this by not caching the frame clock at all and just fetch it every
time.
In the majority of cases, this fetching means iterating over a very
short list (most often a single entry, rarely more), so it's very
unlikely to be of any relevance. The only situations where it might be a
heavier operation is the short time between a hotplug and a layout, as
it will attempt to traverse up to the stage to find a clock, but that's
likely only a few levels, so even that is unlikely to be an issue.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4486
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1947>
This was introduced by accident in commit 1467b6b02a
y-inverted textures in combination with shape masks appear to
be only commonly used with EGLstreams. However, as we draw the
shape mask ourselves, we don't want to apply the y-invert to it
as testified by the left over `cogl_pipeline_set_layer_matrix()`.
Note that we still allow to apply viemports and buffer transforms,
as the Xwayland mode setting emulation may use it (in fact only
the former, but it probably does not hurt to leave the later as well).
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1792
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1937>
This code sneaked unconditionally, even though we can disable
tracing code with -Dprofiler=false. Add some COGL_HAS_TRACING
checks so that this code is also optionally built.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1951>
When a viewport source rect or destination size is set, `stex->dst_width`
gives us the the cropped and/or scaled size. At this step, we need the
uncropped/unscaled size however.
Note: this is only ever relevant if buffer transform and viewport are
used together - otherwise the values are the same.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1836>
The shadow size is factored into the paint volume MetaWindowActorX11
returns in its get_paint_volume() vfunc override, so we should
invalidate the paint volume every time that shadow might change.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1829>
When using buffer transforms and viewports together, we currently
apply the transformation (read: rotation) first, resulting in
wrong buffer coordinates for viewport source rects.
Flip the order in whitch we apply our matrix transformations.
This can be tested e.g. via:
`weston-simple-damage --use-viewport --transform=flipped-180`
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1832>
Currently when reordering subsurfaces, we un- and reparent all child
actors of the window actor. This is unnecessarily wasteful and
triggers bugs in clutter. While the underlying issue should be fixed
eventually, simply reorder the actors with the tools clutter provides
us with, avoiding those bugs and likely being faster as well.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1831>
When the texture size is invalidated using `invalidate_size()`, the new
size will only get calculated the next time `update_size()` is
called. This happens e.g. in `meta_shaped_texture_get_preferred_size()`
via `ensure_size_valid()`.
`update_size()` can chain up to `clutter_content_invalidate_size()`
as well as emitting a `size-changed` signal. If this happens during
layout, the result is a 'change the layout conditions during layout'
issue, causing heavy breakage in e.g. the Shell overview.
To fix this, expose `ensure_size_valid()` as API so callers can make
sure the texture has a valid size without creating redundant size
invalidations calls.
Note that if a buffer with a new size is attached we already trigger
`update_size()` explicitely, avoiding such situations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1799>
If only a viewport destination size is set, the noop viewport has
to take the buffer scale into account.
If a viewport source but no viewport destination size is set, the
destination size is that of the viewport source, not of the whole
texture.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1786>
The order of which function argument expressions are executed is
undefined, so don't rely on this for setting the background colors, as
it results in different colors on different architectures.
For example, it has been observed that the order of execution is
reversed comparing x86_64 and aarch64, making these two architectures
having different background color.
Fix this confusion, and also reproduceability in future reference tests,
by making the order of execution predictable.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
