Commit Graph

43 Commits

Author SHA1 Message Date
Robert Bragg
f80cb197a9 cogl: rename CoglMaterial -> CoglPipeline
This applies an API naming change that's been deliberated over for a
while now which is to rename CoglMaterial to CoglPipeline.

For now the new pipeline API is marked as experimental and public
headers continue to talk about materials not pipelines. The CoglMaterial
API is now maintained in terms of the cogl_pipeline API internally.
Currently this API is targeting Cogl 2.0 so we will have time to
integrate it properly with other upcoming Cogl 2.0 work.

The basic reasons for the rename are:
- That the term "material" implies to many people that they are
  constrained to fragment processing; perhaps as some kind of high-level
  texture abstraction.
    - In Clutter they get exposed by ClutterTexture actors which may be
      re-inforcing this misconception.
- When comparing how other frameworks use the term material, a material
  sometimes describes a multi-pass fragment processing technique which
  isn't the case in Cogl.
- In code, "CoglPipeline" will hopefully be a much more self documenting
  summary of what these objects represent; a full GPU pipeline
  configuration including, for example, vertex processing, fragment
  processing and blending.
- When considering the API documentation story, at some point we need a
  document introducing developers to how the "GPU pipeline" works so it
  should become intuitive that CoglPipeline maps back to that
  description of the GPU pipeline.
- This is consistent in terminology and concept to OpenGL 4's new
  pipeline object which is a container for program objects.

Note: The cogl-material.[ch] files have been renamed to
cogl-material-compat.[ch] because otherwise git doesn't seem to treat
the change as a moving the old cogl-material.c->cogl-pipeline.c and so
we loose all our git-blame history.
2010-11-03 18:09:23 +00:00
Robert Bragg
44644d0a9e primitives: implements cogl_polygon on vertex_attributes
This updates the implementation of cogl_polygon so it sits on the new
CoglVertexArray and CoglVertexAttribute apis. This lets us minimize the
number of different drawing paths we have to maintain in Cogl.

Since the sliced texture support for cogl_polygon has been broken for a
long time now and no one has complained this patch also greatly
simplifies the code by not doing any special material validation so
cogl_polygon will be restricted in the same way as
cogl_draw_vertex_attributes. (i.e. sliced textures not supported).
2010-11-03 18:09:22 +00:00
Robert Bragg
1b9a247174 cogl: Adds {push,pop,get}_source functions
This exposes the idea of a stack of source materials instead of just
having a single current material. This allows the writing of orthogonal
code that can change the current source material and restore it to its
previous state. It also allows the implementation of new composite
primitives that may want to validate the current source material and
possibly make override changes in a derived material.
2010-10-26 12:08:20 +01:00
Robert Bragg
8640f527cb cogl: don't include cogl-debug.h in cogl.h or install
cogl-debug.h is an internal header so it shouldn't have been included by
cogl.h and the header shouldn't be installed either.
2010-08-02 17:41:42 +01:00
Robert Bragg
96b0e6c304 material: splits out all the state flushing code
This moves the code supporting _cogl_material_flush_gl_state into
cogl-material-opengl.c as part of an effort to reduce the size of
cogl-material.c to keep it manageable.
2010-07-13 19:26:58 +01:00
Neil Roberts
82e63a4753 cogl-texture: Replace the ensure_mipmaps virtual with pre_paint
Instead of the ensure_mipmaps virtual that is only called whenever the
texture is about to be rendered with a min filter that needs the
mipmap, there is now a pre_paint virtual that is always called when
the texture is about to be painted in any way. It has a flags
parameter which is used to specify whether the mipmap will be needed.

This is useful for CoglTexturePixmapX11 because it needs to do stuff
before painting that is unrelated to mipmapping.
2010-06-22 11:47:33 +01:00
Emmanuele Bassi
d3b26f3f4d Set the initial value of a variable
Fixes a compiler warning.
2010-06-15 16:42:30 +01:00
Robert Bragg
c9702be94e primitives: we were memsetting the wrong wrap mode overrides pointer
In _cogl_texture_quad_multiple_primitives we weren't memsetting the
CoglMaterialWrapModeOverrides structure we were memsetting
&state.wrap_mode_overrides where state.wrap_mode_overrides is just a
pointer that might potentially later point to the
CoglMaterialWrapModeOverrides structure.
2010-06-15 15:26:28 +01:00
Robert Bragg
a5d6c02f7c primitives: no longer assume _get_layers list remains valid
The internal CoglMaterialLayer pointers associated with a material may
change whenever layer properties are modified so it's no longer ok to
assume that a list of layers returned by cogl_material_get_layers
remains valid if the layers have been changed.
2010-06-15 15:26:28 +01:00
Robert Bragg
3979de6982 cogl: remove _cogl_material_flush_gl_state flush options
Since cogl_material_copy should now be cheap to use we can simplify
how we handle fallbacks and wrap mode overrides etc by simply copying
the original material and making our override changes on the new
material. This avoids the need for a sideband state structure that has
been growing in size and makes flushing material state more complex.

Note the plan is to eventually use weak materials for these override
materials and attach these as private data to the original materials so
we aren't making so many one-shot materials.
2010-06-15 15:26:27 +01:00
Robert Bragg
1cc3ae6944 CoglMaterial: Implements sparse materials design
This is a complete overhaul of the data structures used to manage
CoglMaterial state.

We have these requirements that were aiming to meet:
(Note: the references to "renderlists" correspond to the effort to
support scenegraph level shuffling of Clutter actor primitives so we can
minimize GPU state changes)

Sparse State:
We wanted a design that allows sparse descriptions of state so it scales
well as we make CoglMaterial responsible for more and more state. It
needs to scale well in terms of memory usage and the cost of operations
we need to apply to materials such as comparing, copying and flushing
their state. I.e. we would rather have these things scale by the number
of real changes a material represents not by how much overall state
CoglMaterial becomes responsible for.

Cheap Copies:
As we add support for renderlists in Clutter we will need to be able to
get an immutable handle for a given material's current state so that we
can retain a record of a primitive with its associated material without
worrying that changes to the original material will invalidate that
record.

No more flush override options:
We want to get rid of the flush overrides mechanism we currently use to
deal with texture fallbacks, wrap mode changes and to handle the use of
highlevel CoglTextures that need to be resolved into lowlevel textures
before flushing the material state.

The flush options structure has been expanding in size and the structure
is logged with every journal entry so it is not an approach that scales
well at all. It also makes flushing material state that much more
complex.

Weak Materials:
Again for renderlists we need a way to create materials derived from
other materials but without the strict requirement that modifications to
the original material wont affect the derived ("weak") material. The
only requirement is that its possible to later check if the original
material has been changed.

A summary of the new design:

A CoglMaterial now basically represents a diff against its parent.
Each material has a single parent and a mask of state that it changes.

Each group of state (such as the blending state) has an "authority"
which is found by walking up from a given material through its ancestors
checking the difference mask until a match for that group is found.

There is only one root node to the graph of all materials, which is the
default material first created when Cogl is being initialized.

All the groups of state are divided into two types, such that
infrequently changed state belongs in a separate "BigState" structure
that is only allocated and attached to a material when necessary.

CoglMaterialLayers are another sparse structure. Like CoglMaterials they
represent a diff against their parent and all the layers are part of
another graph with the "default_layer_0" layer being the root node that
Cogl creates during initialization.

Copying a material is now basically just a case of slice allocating a
CoglMaterial, setting the parent to be the source being copied and
zeroing the mask of changes.

Flush overrides should now be handled by simply relying on the cheapness
of copying a material and making changes to it. (This will be done in a
follow on commit)

Weak material support will be added in a follow on commit.
2010-06-15 15:26:27 +01:00
Robert Bragg
acc44161c1 material: Adds backend abstraction for fragment processing
As part of an effort to improve the architecture of CoglMaterial
internally this overhauls how we flush layer state to OpenGL by adding a
formal backend abstraction for fragment processing and further
formalizing the CoglTextureUnit abstraction.

There are three backends: "glsl", "arbfp" and "fixed". The fixed backend
uses the OpenGL fixed function APIs to setup the fragment processing,
the arbfp backend uses code generation to handle fragment processing
using an ARBfp program, and the GLSL backend is currently only there as
a formality to handle user programs associated with a material. (i.e.
the glsl backend doesn't yet support code generation)

The GLSL backend has highest precedence, then arbfp and finally the
fixed. If a backend can't support some particular CoglMaterial feature
then it will fallback to the next backend.

This adds three new COGL_DEBUG options:
* "disable-texturing" as expected should disable all texturing
* "disable-arbfp" always make the arbfp backend fallback
* "disable-glsl" always make the glsl backend fallback
* "show-source" show code generated by the arbfp/glsl backends
2010-06-09 17:15:59 +01:00
Robert Bragg
a21d909129 primitives: make sure to update texture storage before drawing
We want to make sure that the material state flushing code will never
result in changes to the texture storage for that material. So for
example mipmaps need to be ensured by the primitives code.

Changes to the texture storage will invalidate the texture coordinates
in the journal and we want to avoid a recursion of journal flushing.
2010-06-09 15:19:31 +01:00
Neil Roberts
aaf5600b2d cogl: Use a CoglBitmask to store the list of used texcoord arrays
Instead of directly using a guint32 to store a bitmask for each used
texcoord array, it now stores them in a CoglBitmask. This removes the
limitation of 32 layers (although there are still other places in Cogl
that imply this restriction). To disable texcoord arrays code should
call _cogl_disable_other_texcoord_arrays which takes a bitmask of
texcoord arrays that should not be disabled. There are two extra
bitmasks stored in the CoglContext which are used temporarily for this
function to avoid allocating a new bitmask each time.

http://bugzilla.openedhand.com/show_bug.cgi?id=2132
2010-05-24 16:10:57 +01:00
Neil Roberts
992d5f7fb6 cogl-vertex-buffer: Don't disable layers with no texture coords
It should be quite acceptable to use a texture without defining any
texture coords. For example a shader may be in use that is doing
texture lookups without referencing the texture coordinates. Also it
should be possible to replace the vertex colors using a texture layer
without a texture but with a constant layer color.

enable_state_for_drawing_buffer no longer sets any disabled layers in
the overrides. Instead of counting the number of units with texture
coordinates it now keeps them in a mask. This means there can now be
gaps in the list of enabled texture coordinate arrays. To cope with
this, the Cogl context now also stores a mask to track the enabled
arrays. Instead of code manually iterating each enabled array to
disable them, there is now an internal function called
_cogl_disable_texcoord_arrays which disables a given mask.

I think this could also fix potential bugs when a vertex buffer has
gaps in the texture coordinate attributes that it provides. For
example if the vertex buffer only had texture coordinates for layer 2
then the disabling code would not disable the coordinates for layers 0
and 1 even though they are not used. This could cause a crash if the
previous data for those arrays is no longer valid.

http://bugzilla.openedhand.com/show_bug.cgi?id=2132
2010-05-24 16:10:56 +01:00
Neil Roberts
3769862323 cogl-material: Use CLAMP_TO_EDGE for WRAP_AUTOMATIC unless overriden
CoglMaterial now sets GL_CLAMP_TO_EDGE if WRAP_MODE_AUTOMATIC is used
unless it is overridden when the material is flushed. The primitives
are still expected to expose repeat semantics so no user visible
changes are made. The idea is that drawing non-repeated textures is
the most common case so if we make clamp_to_ege the default then we
will reduce the number of times we have to override the
material. Avoiding overrides will become important if the overriding
mechanism is replaced with one where the primitive is expected to copy
the material and change that instead.
2010-04-12 15:44:23 +01:00
Neil Roberts
e007bc5358 cogl-material: Add support for setting the wrap mode for a layer
Previously, Cogl's texture coordinate system was effectively always
GL_REPEAT so that if an application specifies coordinates outside the
range 0→1 it would get repeated copies of the texture. It would
however change the mode to GL_CLAMP_TO_EDGE if all of the coordinates
are in the range 0→1 so that in the common case that the whole texture
is being drawn with linear filtering it will not blend in edge pixels
from the opposite sides.

This patch adds the option for applications to change the wrap mode
per layer. There are now three wrap modes: 'repeat', 'clamp-to-edge'
and 'automatic'. The automatic map mode is the default and it
implements the previous behaviour. The wrap mode can be changed for
the s and t coordinates independently. I've tried to make the
internals support setting the r coordinate but as we don't support 3D
textures yet I haven't exposed any public API for it.

The texture backends still have a set_wrap_mode virtual but this value
is intended to be transitory and it will be changed whenever the
material is flushed (although the backends are expected to cache it so
that it won't use too many GL calls). In my understanding this value
was always meant to be transitory and all primitives were meant to set
the value before drawing. However there were comments suggesting that
this is not the expected behaviour. In particular the vertex buffer
drawing code never set a wrap mode so it would end up with whatever
the texture was previously used for. These issues are now fixed
because the material will always set the wrap modes.

There is code to manually implement clamp-to-edge for textures that
can't be hardware repeated. However this doesn't fully work because it
relies on being able to draw the stretched parts using quads with the
same values for tx1 and tx2. The texture iteration code doesn't
support this so it breaks. This is a separate bug and it isn't
trivially solved.

When flushing a material there are now extra options to set wrap mode
overrides. The overrides are an array of values for each layer that
specifies an override for the s, t or r coordinates. The primitives
use this to implement the automatic wrap mode. cogl_polygon also uses
it to set GL_CLAMP_TO_BORDER mode for its trick to render sliced
textures. Although this code has been added it looks like the sliced
trick has been broken for a while and I haven't attempted to fix it
here.

I've added a constant to represent the maximum number of layers that a
material supports so that I can size the overrides array. I've set it
to 32 because as far as I can tell we have that limit imposed anyway
because the other flush options use a guint32 to store a flag about
each layer. The overrides array ends up adding 32 bytes to each flush
options struct which may be a concern.

http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-12 15:44:23 +01:00
Neil Roberts
fb7f1a7fd6 Split the wrap mode of _cogl_texture_set_wrap_mode into three
GL supports setting different wrap modes for the s, t and r
coordinates so we should design the backend interface to support that
also. The r coordinate is not currently used by any of the backends
but we might as well have it to make life easier if we ever add
support for 3D textures.

http://bugzilla.openedhand.com/show_bug.cgi?id=2063
2010-04-12 15:44:23 +01:00
Robert Bragg
1f715ad153 cogl: rename cogl_enable to _cogl_enable
Every now and then someone sees the cogl_enable API and gets confused,
thinking its public API so this renames the symbol to be clear that it's
is an internal only API.
2010-04-01 12:34:42 +01:00
Owen W. Taylor
770ca1311d Fix checks for out-of-bounds coordinates and repeats
Add a return result from CoglTexture.transform_quad_coords_to_gl(),
so that we can properly determine the nature of repeats in
the face of GL_TEXTURE_RECTANGLE_ARB, where the returned
coordinates are not normalized.

The comment "We also work out whether any of the texture
coordinates are outside the range [0.0,1.0]. We need to do
this after calling transform_coords_to_gl in case the texture
backend is munging the coordinates (such as in the sub texture
backend)." is disregarded and removed, since it's actually
the virtual coordinates that determine whether we repeat,
not the GL coordinates.

Warnings about disregarded layers are used in all cases where
applicable, including for subtextures.

http://bugzilla.openedhand.com/show_bug.cgi?id=2016

Signed-off-by: Neil Roberts <neil@linux.intel.com>
2010-03-15 16:09:41 +00:00
Emmanuele Bassi
72f4ddf532 Remove mentions of the FSF address
Since using addresses that might change is something that finally
the FSF acknowledge as a plausible scenario (after changing address
twice), the license blurb in the source files should use the URI
for getting the license in case the library did not come with it.

Not that URIs cannot possibly change, but at least it's easier to
set up a redirection at the same place.

As a side note: this commit closes the oldes bug in Clutter's bug
report tool.

http://bugzilla.openedhand.com/show_bug.cgi?id=521
2010-03-01 12:56:10 +00:00
Robert Bragg
142128e107 cogl_rectangle: avoid redundant copy of geometry
All the cogl_rectangle* APIs normalize their input into into an array of
_CoglMutiTexturedRect rectangles and pass these on to our work horse;
_cogl_rectangles_with_multitexture_coords. The definition of
_CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and
y_2 which meant for some common cases we were having to copy out from an
array into these members. We are now able to simply point into the users
array avoiding a copy which seems desirable when submiting lots of
rectangles.
2010-02-12 14:05:02 +00:00
Robert Bragg
7d9b733446 cogl: cleanly separate primitives + paths code
The function prototypes for the primitives API were spread between
cogl-path.h and cogl-texture.h and should have been in a
cogl-primitives.h.

As well as shuffling the prototypes around into more sensible places
this commit splits the cogl-path API out from cogl-primitives.c into
a cogl-path.c
2010-02-12 14:05:01 +00:00
Robert Bragg
0f5f4e8645 cogl: improves header and coding style consistency
We've had complaints that our Cogl code/headers are a bit "special" so
this is a first pass at tidying things up by giving them some
consistency. These changes are all consistent with how new code in Cogl
is being written, but the style isn't consistently applied across all
code yet.

There are two parts to this patch; but since each one required a large
amount of effort to maintain tidy indenting it made sense to combine the
changes to reduce the time spent re indenting the same lines.

The first change is to use a consistent style for declaring function
prototypes in headers. Cogl headers now consistently use this style for
prototypes:

 return_type
 cogl_function_name (CoglType arg0,
                     CoglType arg1);

Not everyone likes this style, but it seems that most of the currently
active Cogl developers agree on it.

The second change is to constrain the use of redundant glib data types
in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all
been replaced with int, unsigned int, float, long, unsigned long and char
respectively. When talking about pixel data; use of guchar has been
replaced with guint8, otherwise unsigned char can be used.

The glib types that we continue to use for portability are gboolean,
gint{8,16,32,64}, guint{8,16,32,64} and gsize.

The general intention is that Cogl should look palatable to the widest
range of C programmers including those outside the Gnome community so
- especially for the public API - we want to minimize the number of
foreign looking typedefs.
2010-02-12 14:05:00 +00:00
Robert Bragg
b31f2dd4a2 cogl path: make sure marking the clip state dirty takes affect
When we trashed the contents of the stencil buffer during
_cogl_path_fill_nodes we marked the clip stack state as dirty and expected
the clip stack code would clean up our glStencilFunc state.

The problem is that we only try and update the clip state during
_cogl_journal_init (when we flush the framebuffer state) which is only
called when the journal first gets something logged in it.

To make sure the stencil state is cleaned up we now also flush the journal
so _cogl_journal_init will be called for the next logged rectangle.
2010-02-08 13:35:45 +00:00
Neil Roberts
12b45aaa30 cogl-primitives: Ensure the mipmaps for a layer before logging quads
With the atlas texture backend ensuring the mipmaps can make it become
a completely different texture which will have different texture
coordinates or may even be sliced. Therefore we need to ensure the
mipmaps before deciding which quads to log in the journal. This adds a
new private function to cogl-material which ensures the mipmaps if
needed.
2010-01-18 09:22:11 +00:00
Neil Roberts
ae7825275e cogl: Make CoglSubTexture only work for quad rendering
The sub texture backend doesn't work well as a completely general
texture backend because for example when rendering with cogl_polygon
it needs to be able to tranform arbitrary texture coordinates without
reference to the other coordintes. This can't be done when the texture
coordinates are a multiple of one because sometimes the coordinate
should represent the left or top edge and sometimes it should
represent the bottom or top edge. For example if the s coordinates are
0 and 1 then 1 represents the right edge but if they are 1 and 2 then
1 represents the left edge.

Instead the sub-textures are now documented not to support coordinates
outside the range [0,1]. The coordinates for the sub-region are now
represented as integers as this helps avoid rounding issues. The
region can no longer be a super-region of the texture as this
simplifies the code quite a lot.

There are two new texture virtual functions:

transform_quad_coords_to_gl - This transforms two pairs of coordinates
     representing a quad. It will return FALSE if the coordinates can
     not be transformed. The sub texture backend uses this to detect
     coordinates that require repeating which causes cogl-primitives
     to use manual repeating.

ensure_non_quad_rendering - This is used in cogl_polygon and
     cogl_vertex_buffer to inform the texture backend that
     transform_quad_to_gl is going to be used. The atlas backend
     migrates the texture out of the atlas when it hits this.
2010-01-18 09:22:04 +00:00
Neil Roberts
f5d809f1e8 Merge branch 'master' into more-texture-backends 2010-01-15 12:15:46 +00:00
Neil Roberts
dfc3dd9c43 cogl: Remove the CGL_* defines
These macros used to define Cogl wrappers for the GLenum values. There are
now Cogl enums everywhere in the API where these were required so we
shouldn't need them anymore. They were in the public headers but as
they are not neccessary and were not in the API docs for Clutter 1.0
it should be safe to remove them.
2010-01-12 17:10:15 +00:00
Emmanuele Bassi
de5c84c453 cogl: Const-ify vertices in cogl_polygon()
The CoglTextureVertex array passed to cogl_polygon() is a pure
in-argument and should be const-ified.

http://bugzilla.openedhand.com/show_bug.cgi?id=1917
2010-01-04 11:43:00 +00:00
Neil Roberts
7c5aea9b68 cogl: Make the callback for foreach_sub_texture_in_region use const
The CoglTextureSliceCallback function pointer now takes const pointers
for the texture coordinates. This makes it clearer that the callback
should not modify the array and therefore the backend can use the same
array for both sets of coords.
2009-12-02 22:03:08 +00:00
Neil Roberts
28e37e9f57 cogl-primitives: Check for repeating after the coordinate transform
In _cogl_multitexture_quad_single_primitive we use a wrap mode of
GL_CLAMP_TO_EDGE if the texture coordinates are all in the range [0,1]
or GL_REPEAT otherwise. This is to avoid pulling in pixels from either
side when using GL_LINEAR filter mode and rendering the entire
texture. Previously it was checking using the unconverted texture
coordinates. This is ok unless the texture backend is radically
transforming the texture coordinates, such as in the sub texture
backend where the coordinates may map to something completely
different. We now check whether the coordinates are in range after
converting them.
2009-12-02 22:03:07 +00:00
Robert Bragg
120f94d073 primitives: Don't use dynamic arrays since VS2008 can't cope with them :-(
This changes _cogl_path_fill_nodes_scanlines to use g_alloca instead of
using a variable to declare an array length.
2009-11-27 15:24:09 +00:00
Robert Bragg
944423a8d9 cogl: deprecate cogl_draw_buffer API and replace with a cogl_framebuffer API
cogl_push_draw_buffer, cogl_set_draw_buffer and cogl_pop_draw_buffer are now
deprecated and new code should use the new cogl_framebuffer_* API instead.

Code that previously did:
    cogl_push_draw_buffer ();
    cogl_set_draw_buffer (COGL_OFFSCREEN_BUFFER, buffer);
    /* draw */
    cogl_pop_draw_buffer ();
should now be re-written as:
    cogl_push_framebuffer (buffer);
    /* draw */
    cogl_pop_framebuffer ();

As can be seen from the example above the rename has been used as an
opportunity to remove the redundant target argument from
cogl_set_draw_buffer; it now only takes one call to redirect to an offscreen
buffer, and finally the term framebuffer may be a bit more familiar to
anyone coming from an OpenGL background.
2009-11-26 19:33:14 +00:00
Neil Roberts
d309272901 [cogl-primitives] Don't clear the whole stencil buffer
When _cogl_add_path_to_stencil_buffer is used to draw a path we don't
need to clear the entire stencil buffer. Instead it can clear just the
bounding box of the path. This adds an extra parameter called
'need_clear' which is only set if the stencil buffer is being used for
clipping.

http://bugzilla.openedhand.com/show_bug.cgi?id=1829
2009-11-13 10:51:47 +00:00
Robert Bragg
d4ffa2f819 [debug] Adds a COGL_DEBUG=force-scanline-paths
For a long time now the GLES driver for Cogl has supported a fallback
scanline rasterizer for filling paths when no stencil buffer is available,
but now that we build the same cogl-primitives code for GL and GLES I
thought it may sometimes be useful for debugging to force Cogl to use the
scanline rasterizer instead of the current stencil buffer approach.
2009-11-05 21:10:16 +00:00
Robert Bragg
b49f90acb6 [cogl-primitives] Get rid of driver specific cogl-primitives code
These files were practically identical, except the gles code had additional
support for filling paths without a stencil buffer.  All the driver code has
now been moved into cogl/cogl-primitives.c
2009-11-04 16:02:34 +00:00
Robert Bragg
181bf92086 [cogl] Use clockwise face winding for offscreen buffers with culling enabled
Because Cogl defines the origin for texture as top left and offscreen draw
buffers can be used to render to textures, we (internally) force all
offscreen rendering to be upside down. (because OpenGL defines the origin
to be bottom left)

By forcing the users scene to be rendered upside down though we also reverse
the winding order of all the drawn triangles which may interfere with the
users use of backface culling.  This patch ensures that we reverse the
winding order for a front face (if culling is in use) while rendering
offscreen so we don't conflict with the users back face culling.
2009-11-04 03:34:03 +00:00
Robert Bragg
bb3a008318 [draw-buffers] First pass at overhauling Cogl's framebuffer management
Cogl's support for offscreen rendering was originally written just to support
the clutter_texture_new_from_actor API and due to lack of documentation and
several confusing - non orthogonal - side effects of using the API it wasn't
really possible to use directly.

This commit does a number of things:
- It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h}
  files instead which should be easier to maintain.
- internally CoglFbo objects are now called CoglDrawBuffers. A
  CoglDrawBuffer is an abstract base class that is inherited from to
  implement CoglOnscreen and CoglOffscreen draw buffers.  CoglOffscreen draw
  buffers will initially be used to support the
  cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will
  start to be used internally to represent windows as we aim to migrate some
  of Clutter's backend code to Cogl.
- It makes draw buffer objects the owners of the following state:
  - viewport
  - projection matrix stack
  - modelview matrix stack
  - clip state
(This means when you switch between draw buffers you will automatically be
 switching to their associated viewport, matrix and clip state)

Aside from hopefully making cogl_offscreen_new_to_texture be more useful
short term by having simpler and well defined semantics for
cogl_set_draw_buffer, as mentioned above this is the first step for a couple
of other things:
- Its a step toward moving ownership for windows down from Clutter backends
  into Cogl, by (internally at least) introducing the CoglOnscreen draw
  buffer.  Note: the plan is that cogl_set_draw_buffer will accept on or
  offscreen draw buffer handles, and the "target" argument will become
  redundant since we will instead query the type of the given draw buffer
  handle.
- Because we have a common type for on and offscreen framebuffers we can
  provide a unified API for framebuffer management. Things like:
  - blitting between buffers
  - managing ancillary buffers (e.g. attaching depth and stencil buffers)
  - size requisition
  - clearing
2009-11-03 17:23:03 +00:00
Neil Roberts
435d415a45 [cogl_polygon] Enable COGL_ENABLE_BLEND when use_color is set
Otherwise you can't use the alpha channel of the vertex colors unless
the material has a texture with alpha or the material's color has
alpha less than 255.
2009-10-27 13:18:51 +00:00
Robert Bragg
861766f4ad [cogl-primitives] Split the journal out from cogl-primitives.c
The Journal can be considered a standalone component, so even though
it's currently only used to log quads, it seems better to split it
out into its own file.
2009-10-16 18:58:52 +01:00
Robert Bragg
c40d5ae9ea [cogl-texture] Seal CoglTexture internals from cogl-primitives.c
cogl-primitives.c was previously digging right into CoglTextures so it could
manually iterate the texture slices for texturing quads and polygons and
because we were missing some state getters we were lazily just poking into
the structures directly.

This adds some extra state getter functions, and adds a higher level
_cogl_texture_foreach_slice () API that hopefully simplifies the way in
which sliced textures may be used to render primitives.  This lets you
specify a rectangle in "virtual" texture coords and it will call a given
callback for each slice that intersects that rectangle giving the virtual
coords of the current slice and corresponding "real" texture coordinates for
the underlying gl texture.

At the same time a noteable bug in how we previously iterated sliced
textures was fixed, whereby we weren't correctly handling inverted texture
coordinates.  E.g.  with the previous code if you supplied texture coords of
tx1=100,ty1=0,tx2=0,ty2=100 (inverted along y axis) that would result in a
back-facing quad, which could be discarded if using back-face culling.
2009-10-16 18:58:51 +01:00
Robert Bragg
0bce7eac53 Intial Re-layout of the Cogl source code and introduction of a Cogl Winsys
As part of an incremental process to have Cogl be a standalone project we
want to re-consider how we organise the Cogl source code.

Currently this is the structure I'm aiming for:
cogl/
    cogl/
	<put common source here>
	winsys/
	   cogl-glx.c
	   cogl-wgl.c
	driver/
	    gl/
	    gles/
	os/ ?
    utils/
	cogl-fixed
	cogl-matrix-stack?
        cogl-journal?
        cogl-primitives?
    pango/

The new winsys component is a starting point for migrating window system
code (i.e.  x11,glx,wgl,osx,egl etc) from Clutter to Cogl.

The utils/ and pango/ directories aren't added by this commit, but they are
noted because I plan to add them soon.

Overview of the planned structure:

* The winsys/ API is the API that binds OpenGL to a specific window system,
  be that X11 or win32 etc.  Example are glx, wgl and egl. Much of the logic
  under clutter/{glx,osx,win32 etc} should migrate here.

* Note there is also the idea of a winsys-base that may represent a window
  system for which there are multiple winsys APIs.  An example of this is
  x11, since glx and egl may both be used with x11.  (currently only Clutter
  has the idea of a winsys-base)

* The driver/ represents a specific varient of OpenGL. Currently we have "gl"
  representing OpenGL 1.4-2.1 (mostly fixed function) and "gles" representing
  GLES 1.1 (fixed funciton) and 2.0 (fully shader based)

* Everything under cogl/ should fundamentally be supporting access to the
  GPU.  Essentially Cogl's most basic requirement is to provide a nice GPU
  Graphics API and drawing a line between this and the utility functionality
  we add to support Clutter should help keep this lean and maintainable.

* Code under utils/ as suggested builds on cogl/ adding more convenient
  APIs or mechanism to optimize special cases. Broadly speaking you can
  compare cogl/ to OpenGL and utils/ to GLU.

* clutter/pango will be moved to clutter/cogl/pango

How some of the internal configure.ac/pkg-config terminology has changed:
backendextra -> CLUTTER_WINSYS_BASE # e.g. "x11"
backendextralib -> CLUTTER_WINSYS_BASE_LIB # e.g. "x11/libclutter-x11.la"
clutterbackend -> {CLUTTER,COGL}_WINSYS # e.g. "glx"
CLUTTER_FLAVOUR -> {CLUTTER,COGL}_WINSYS
clutterbackendlib -> CLUTTER_WINSYS_LIB
CLUTTER_COGL -> COGL_DRIVER # e.g. "gl"

Note: The CLUTTER_FLAVOUR and CLUTTER_COGL defines are kept for apps

As the first thing to take advantage of the new winsys component in Cogl;
cogl_get_proc_address() has been moved from cogl/{gl,gles}/cogl.c into
cogl/common/cogl.c and this common implementation first trys
_cogl_winsys_get_proc_address() but if that fails then it falls back to
gmodule.
2009-10-16 18:58:50 +01:00