mutter/cogl/cogl-pipeline-state-private.h

197 lines
6.7 KiB
C
Raw Normal View History

/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* A Low Level GPU Graphics and Utilities API
*
* Copyright (C) 2008,2009,2010 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*
*
* Authors:
* Robert Bragg <robert@linux.intel.com>
*/
#ifndef __COGL_PIPELINE_STATE_PRIVATE_H
#define __COGL_PIPELINE_STATE_PRIVATE_H
CoglPipeline *
_cogl_pipeline_get_user_program (CoglPipeline *pipeline);
CoglBool
cogl-pipeline: Add two hook points for adding shader snippets This adds two new public experimental functions for attaching CoglSnippets to two hook points on a CoglPipeline: void cogl_pipeline_add_vertex_hook (CoglPipeline *, CoglSnippet *) void cogl_pipeline_add_fragment_hook (CoglPipeline *, CoglSnippet *) The hooks are intended to be around the entire vertex or fragment processing. That means the pre string in the snippet will be inserted at the very top of the main function and the post function will be inserted at the very end. The declarations get inserted in the global scope. The snippets are stored in two separate linked lists with a structure containing an enum representing the hook point and a pointer to the snippet. The lists are meant to be for hooks that affect the vertex shader and fragment shader respectively. Although there are currently only two hooks and the names match these two lists, the intention is *not* that each new hook will be in a separate list. The separation of the lists is just to make it easier to determine which shader needs to be regenerated when a new snippet is added. When a pipeline becomes the authority for either the vertex or fragment snipper state, it simply copies the entire list from the previous authority (although of course the shader snippet objects are referenced instead of copied so it doesn't duplicate the source strings). Each string is inserted into its own block in the shader. This means that each string has its own scope so it doesn't need to worry about name collisions with variables in other snippets. However it does mean that the pre and post strings can't share variables. It could be possible to wrap both parts in one block and then wrap the actual inner hook code in another block, however this would mean that any further snippets within the outer snippet would be able to see those variables. Perhaps something to consider would be to put each snippet into its own function which calls another function between the pre and post strings to do further processing. The pipeline cache for generated programs was previously shared with the fragment shader cache because the state that affects vertex shaders was a subset of the state that affects fragment shaders. This is no longer the case because there is a separate state mask for vertex snippets so the program cache now has its own hash table. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-17 11:52:21 -05:00
_cogl_pipeline_has_vertex_snippets (CoglPipeline *pipeline);
CoglBool
cogl-pipeline: Add two hook points for adding shader snippets This adds two new public experimental functions for attaching CoglSnippets to two hook points on a CoglPipeline: void cogl_pipeline_add_vertex_hook (CoglPipeline *, CoglSnippet *) void cogl_pipeline_add_fragment_hook (CoglPipeline *, CoglSnippet *) The hooks are intended to be around the entire vertex or fragment processing. That means the pre string in the snippet will be inserted at the very top of the main function and the post function will be inserted at the very end. The declarations get inserted in the global scope. The snippets are stored in two separate linked lists with a structure containing an enum representing the hook point and a pointer to the snippet. The lists are meant to be for hooks that affect the vertex shader and fragment shader respectively. Although there are currently only two hooks and the names match these two lists, the intention is *not* that each new hook will be in a separate list. The separation of the lists is just to make it easier to determine which shader needs to be regenerated when a new snippet is added. When a pipeline becomes the authority for either the vertex or fragment snipper state, it simply copies the entire list from the previous authority (although of course the shader snippet objects are referenced instead of copied so it doesn't duplicate the source strings). Each string is inserted into its own block in the shader. This means that each string has its own scope so it doesn't need to worry about name collisions with variables in other snippets. However it does mean that the pre and post strings can't share variables. It could be possible to wrap both parts in one block and then wrap the actual inner hook code in another block, however this would mean that any further snippets within the outer snippet would be able to see those variables. Perhaps something to consider would be to put each snippet into its own function which calls another function between the pre and post strings to do further processing. The pipeline cache for generated programs was previously shared with the fragment shader cache because the state that affects vertex shaders was a subset of the state that affects fragment shaders. This is no longer the case because there is a separate state mask for vertex snippets so the program cache now has its own hash table. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-17 11:52:21 -05:00
_cogl_pipeline_has_fragment_snippets (CoglPipeline *pipeline);
CoglBool
_cogl_pipeline_has_non_layer_vertex_snippets (CoglPipeline *pipeline);
CoglBool
_cogl_pipeline_has_non_layer_fragment_snippets (CoglPipeline *pipeline);
void
_cogl_pipeline_set_fog_state (CoglPipeline *pipeline,
const CoglPipelineFogState *fog_state);
CoglBool
_cogl_pipeline_color_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_lighting_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_alpha_func_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_alpha_func_reference_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_blend_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_depth_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_fog_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
Don't generate GLSL for the point size for default pipelines Previously on GLES2 where there is no builtin point size uniform then we would always add a line to the vertex shader to write to the builtin point size output because when generating the shader it is not possible to determine if the pipeline will be used to draw points or not. This patch changes it so that the default point size is 0.0f which is documented to have undefined results when drawing points. That way we can avoid adding the point size code to the shader in that case. The assumption is that any application that is drawing points will probably have explicitly set the point size on the pipeline anyway so it is not a big deal to change the default size from 1.0f. This adds a new pipeline state flag to track whether the point size is non-zero. This needs to be its own state because altering it needs to cause a different shader to be added to the pipeline cache. The state flags that affect the vertex shader have been changed from a constant to a runtime function because they will be different depending on whether there is a builtin point size uniform. There is also a unit test to ensure that changing the point size does or doesn't generate a new shader depending on the values. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit b2eba06e16b587acbf5c57944a70ceccecb4f175) Conflicts: cogl/cogl-pipeline-private.h cogl/cogl-pipeline-state-private.h cogl/cogl-pipeline-state.c cogl/cogl-pipeline.c
2013-06-20 08:25:49 -04:00
CoglBool
_cogl_pipeline_non_zero_point_size_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_point_size_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
Add support for per-vertex point sizes This adds a new function to enable per-vertex point size on a pipeline. This can be set with cogl_pipeline_set_per_vertex_point_size(). Once enabled the point size can be set either by drawing with an attribute named 'cogl_point_size_in' or by writing to the 'cogl_point_size_out' builtin from a snippet. There is a feature flag which must be checked for before using per-vertex point sizes. This will only be set on GL >= 2.0 or on GLES 2.0. GL will only let you set a per-vertex point size from GLSL by writing to gl_PointSize. This is only available in GL2 and not in the older GLSL extensions. The per-vertex point size has its own pipeline state flag so that it can be part of the state that affects vertex shader generation. Having to enable the per vertex point size with a separate function is a bit awkward. Ideally it would work like the color attribute where you can just set it for every vertex in your primitive with cogl_pipeline_set_color or set it per-vertex by just using the attribute. This is harder to get working with the point size because we need to generate a different vertex shader depending on what attributes are bound. I think if we wanted to make this work transparently we would still want to internally have a pipeline property describing whether the shader was generated with per-vertex support so that it would work with the shader cache correctly. Potentially we could make the per-vertex property internal and automatically make a weak pipeline whenever the attribute is bound. However we would then also need to automatically detect when an application is writing to cogl_point_size_out from a snippet. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8495d9c1c15ce389885a9356d965eabd97758115) Conflicts: cogl/cogl-context.c cogl/cogl-pipeline-private.h cogl/cogl-pipeline.c cogl/cogl-private.h cogl/driver/gl/cogl-pipeline-progend-fixed.c cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
2012-11-08 11:56:02 -05:00
CoglBool
_cogl_pipeline_per_vertex_point_size_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_logic_ops_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_user_shader_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
_cogl_pipeline_cull_face_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
cogl-pipeline: Add support for setting uniform values This adds the following new public experimental functions to set uniform values on a CoglPipeline: void cogl_pipeline_set_uniform_1f (CoglPipeline *pipeline, int uniform_location, float value); void cogl_pipeline_set_uniform_1i (CoglPipeline *pipeline, int uniform_location, int value); void cogl_pipeline_set_uniform_float (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const float *value); void cogl_pipeline_set_uniform_int (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const int *value); void cogl_pipeline_set_uniform_matrix (CoglPipeline *pipeline, int uniform_location, int dimensions, int count, gboolean transpose, const float *value); These are similar to the old functions used to set uniforms on a CoglProgram. To get a value to pass in as the uniform_location there is also: int cogl_pipeline_get_uniform_location (CoglPipeline *pipeline, const char *uniform_name); Conceptually the uniform locations are tied to the pipeline so that whenever setting a value for a new pipeline the application is expected to call this function. However in practice the uniform locations are global to the CoglContext. The names are stored in a linked list where the position in the list is the uniform location. The global indices are used so that each pipeline can store a mask of which uniforms it overrides. That way it is quicker to detect which uniforms are different from the last pipeline that used the same CoglProgramState so it can avoid flushing uniforms that haven't changed. Currently the values are not actually compared which means that it will only avoid flushing a uniform if there is a common ancestor that sets the value (or if the same pipeline is being flushed again - in which case the pipeline and its common ancestor are the same thing). The uniform values are stored in the big state of the pipeline as a sparse linked list. A bitmask stores which values have been overridden and only overridden values are stored in the linked list. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-03 13:20:43 -04:00
_cogl_pipeline_uniforms_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
cogl-pipeline: Add two hook points for adding shader snippets This adds two new public experimental functions for attaching CoglSnippets to two hook points on a CoglPipeline: void cogl_pipeline_add_vertex_hook (CoglPipeline *, CoglSnippet *) void cogl_pipeline_add_fragment_hook (CoglPipeline *, CoglSnippet *) The hooks are intended to be around the entire vertex or fragment processing. That means the pre string in the snippet will be inserted at the very top of the main function and the post function will be inserted at the very end. The declarations get inserted in the global scope. The snippets are stored in two separate linked lists with a structure containing an enum representing the hook point and a pointer to the snippet. The lists are meant to be for hooks that affect the vertex shader and fragment shader respectively. Although there are currently only two hooks and the names match these two lists, the intention is *not* that each new hook will be in a separate list. The separation of the lists is just to make it easier to determine which shader needs to be regenerated when a new snippet is added. When a pipeline becomes the authority for either the vertex or fragment snipper state, it simply copies the entire list from the previous authority (although of course the shader snippet objects are referenced instead of copied so it doesn't duplicate the source strings). Each string is inserted into its own block in the shader. This means that each string has its own scope so it doesn't need to worry about name collisions with variables in other snippets. However it does mean that the pre and post strings can't share variables. It could be possible to wrap both parts in one block and then wrap the actual inner hook code in another block, however this would mean that any further snippets within the outer snippet would be able to see those variables. Perhaps something to consider would be to put each snippet into its own function which calls another function between the pre and post strings to do further processing. The pipeline cache for generated programs was previously shared with the fragment shader cache because the state that affects vertex shaders was a subset of the state that affects fragment shaders. This is no longer the case because there is a separate state mask for vertex snippets so the program cache now has its own hash table. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-17 11:52:21 -05:00
_cogl_pipeline_vertex_snippets_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
CoglBool
cogl-pipeline: Add two hook points for adding shader snippets This adds two new public experimental functions for attaching CoglSnippets to two hook points on a CoglPipeline: void cogl_pipeline_add_vertex_hook (CoglPipeline *, CoglSnippet *) void cogl_pipeline_add_fragment_hook (CoglPipeline *, CoglSnippet *) The hooks are intended to be around the entire vertex or fragment processing. That means the pre string in the snippet will be inserted at the very top of the main function and the post function will be inserted at the very end. The declarations get inserted in the global scope. The snippets are stored in two separate linked lists with a structure containing an enum representing the hook point and a pointer to the snippet. The lists are meant to be for hooks that affect the vertex shader and fragment shader respectively. Although there are currently only two hooks and the names match these two lists, the intention is *not* that each new hook will be in a separate list. The separation of the lists is just to make it easier to determine which shader needs to be regenerated when a new snippet is added. When a pipeline becomes the authority for either the vertex or fragment snipper state, it simply copies the entire list from the previous authority (although of course the shader snippet objects are referenced instead of copied so it doesn't duplicate the source strings). Each string is inserted into its own block in the shader. This means that each string has its own scope so it doesn't need to worry about name collisions with variables in other snippets. However it does mean that the pre and post strings can't share variables. It could be possible to wrap both parts in one block and then wrap the actual inner hook code in another block, however this would mean that any further snippets within the outer snippet would be able to see those variables. Perhaps something to consider would be to put each snippet into its own function which calls another function between the pre and post strings to do further processing. The pipeline cache for generated programs was previously shared with the fragment shader cache because the state that affects vertex shaders was a subset of the state that affects fragment shaders. This is no longer the case because there is a separate state mask for vertex snippets so the program cache now has its own hash table. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-17 11:52:21 -05:00
_cogl_pipeline_fragment_snippets_state_equal (CoglPipeline *authority0,
CoglPipeline *authority1);
void
_cogl_pipeline_hash_color_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_blend_enable_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_layers_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_lighting_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_alpha_func_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_alpha_func_reference_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_blend_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_user_shader_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_depth_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_fog_state (CoglPipeline *authority,
CoglPipelineHashState *state);
Don't generate GLSL for the point size for default pipelines Previously on GLES2 where there is no builtin point size uniform then we would always add a line to the vertex shader to write to the builtin point size output because when generating the shader it is not possible to determine if the pipeline will be used to draw points or not. This patch changes it so that the default point size is 0.0f which is documented to have undefined results when drawing points. That way we can avoid adding the point size code to the shader in that case. The assumption is that any application that is drawing points will probably have explicitly set the point size on the pipeline anyway so it is not a big deal to change the default size from 1.0f. This adds a new pipeline state flag to track whether the point size is non-zero. This needs to be its own state because altering it needs to cause a different shader to be added to the pipeline cache. The state flags that affect the vertex shader have been changed from a constant to a runtime function because they will be different depending on whether there is a builtin point size uniform. There is also a unit test to ensure that changing the point size does or doesn't generate a new shader depending on the values. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit b2eba06e16b587acbf5c57944a70ceccecb4f175) Conflicts: cogl/cogl-pipeline-private.h cogl/cogl-pipeline-state-private.h cogl/cogl-pipeline-state.c cogl/cogl-pipeline.c
2013-06-20 08:25:49 -04:00
void
_cogl_pipeline_hash_non_zero_point_size_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_point_size_state (CoglPipeline *authority,
CoglPipelineHashState *state);
Add support for per-vertex point sizes This adds a new function to enable per-vertex point size on a pipeline. This can be set with cogl_pipeline_set_per_vertex_point_size(). Once enabled the point size can be set either by drawing with an attribute named 'cogl_point_size_in' or by writing to the 'cogl_point_size_out' builtin from a snippet. There is a feature flag which must be checked for before using per-vertex point sizes. This will only be set on GL >= 2.0 or on GLES 2.0. GL will only let you set a per-vertex point size from GLSL by writing to gl_PointSize. This is only available in GL2 and not in the older GLSL extensions. The per-vertex point size has its own pipeline state flag so that it can be part of the state that affects vertex shader generation. Having to enable the per vertex point size with a separate function is a bit awkward. Ideally it would work like the color attribute where you can just set it for every vertex in your primitive with cogl_pipeline_set_color or set it per-vertex by just using the attribute. This is harder to get working with the point size because we need to generate a different vertex shader depending on what attributes are bound. I think if we wanted to make this work transparently we would still want to internally have a pipeline property describing whether the shader was generated with per-vertex support so that it would work with the shader cache correctly. Potentially we could make the per-vertex property internal and automatically make a weak pipeline whenever the attribute is bound. However we would then also need to automatically detect when an application is writing to cogl_point_size_out from a snippet. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8495d9c1c15ce389885a9356d965eabd97758115) Conflicts: cogl/cogl-context.c cogl/cogl-pipeline-private.h cogl/cogl-pipeline.c cogl/cogl-private.h cogl/driver/gl/cogl-pipeline-progend-fixed.c cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
2012-11-08 11:56:02 -05:00
void
_cogl_pipeline_hash_per_vertex_point_size_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_logic_ops_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_cull_face_state (CoglPipeline *authority,
CoglPipelineHashState *state);
cogl-pipeline: Add support for setting uniform values This adds the following new public experimental functions to set uniform values on a CoglPipeline: void cogl_pipeline_set_uniform_1f (CoglPipeline *pipeline, int uniform_location, float value); void cogl_pipeline_set_uniform_1i (CoglPipeline *pipeline, int uniform_location, int value); void cogl_pipeline_set_uniform_float (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const float *value); void cogl_pipeline_set_uniform_int (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const int *value); void cogl_pipeline_set_uniform_matrix (CoglPipeline *pipeline, int uniform_location, int dimensions, int count, gboolean transpose, const float *value); These are similar to the old functions used to set uniforms on a CoglProgram. To get a value to pass in as the uniform_location there is also: int cogl_pipeline_get_uniform_location (CoglPipeline *pipeline, const char *uniform_name); Conceptually the uniform locations are tied to the pipeline so that whenever setting a value for a new pipeline the application is expected to call this function. However in practice the uniform locations are global to the CoglContext. The names are stored in a linked list where the position in the list is the uniform location. The global indices are used so that each pipeline can store a mask of which uniforms it overrides. That way it is quicker to detect which uniforms are different from the last pipeline that used the same CoglProgramState so it can avoid flushing uniforms that haven't changed. Currently the values are not actually compared which means that it will only avoid flushing a uniform if there is a common ancestor that sets the value (or if the same pipeline is being flushed again - in which case the pipeline and its common ancestor are the same thing). The uniform values are stored in the big state of the pipeline as a sparse linked list. A bitmask stores which values have been overridden and only overridden values are stored in the linked list. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-03 13:20:43 -04:00
void
_cogl_pipeline_hash_uniforms_state (CoglPipeline *authority,
CoglPipelineHashState *state);
cogl-pipeline: Add two hook points for adding shader snippets This adds two new public experimental functions for attaching CoglSnippets to two hook points on a CoglPipeline: void cogl_pipeline_add_vertex_hook (CoglPipeline *, CoglSnippet *) void cogl_pipeline_add_fragment_hook (CoglPipeline *, CoglSnippet *) The hooks are intended to be around the entire vertex or fragment processing. That means the pre string in the snippet will be inserted at the very top of the main function and the post function will be inserted at the very end. The declarations get inserted in the global scope. The snippets are stored in two separate linked lists with a structure containing an enum representing the hook point and a pointer to the snippet. The lists are meant to be for hooks that affect the vertex shader and fragment shader respectively. Although there are currently only two hooks and the names match these two lists, the intention is *not* that each new hook will be in a separate list. The separation of the lists is just to make it easier to determine which shader needs to be regenerated when a new snippet is added. When a pipeline becomes the authority for either the vertex or fragment snipper state, it simply copies the entire list from the previous authority (although of course the shader snippet objects are referenced instead of copied so it doesn't duplicate the source strings). Each string is inserted into its own block in the shader. This means that each string has its own scope so it doesn't need to worry about name collisions with variables in other snippets. However it does mean that the pre and post strings can't share variables. It could be possible to wrap both parts in one block and then wrap the actual inner hook code in another block, however this would mean that any further snippets within the outer snippet would be able to see those variables. Perhaps something to consider would be to put each snippet into its own function which calls another function between the pre and post strings to do further processing. The pipeline cache for generated programs was previously shared with the fragment shader cache because the state that affects vertex shaders was a subset of the state that affects fragment shaders. This is no longer the case because there is a separate state mask for vertex snippets so the program cache now has its own hash table. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-17 11:52:21 -05:00
void
_cogl_pipeline_hash_vertex_snippets_state (CoglPipeline *authority,
CoglPipelineHashState *state);
void
_cogl_pipeline_hash_fragment_snippets_state (CoglPipeline *authority,
CoglPipelineHashState *state);
cogl-pipeline: Add support for setting uniform values This adds the following new public experimental functions to set uniform values on a CoglPipeline: void cogl_pipeline_set_uniform_1f (CoglPipeline *pipeline, int uniform_location, float value); void cogl_pipeline_set_uniform_1i (CoglPipeline *pipeline, int uniform_location, int value); void cogl_pipeline_set_uniform_float (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const float *value); void cogl_pipeline_set_uniform_int (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const int *value); void cogl_pipeline_set_uniform_matrix (CoglPipeline *pipeline, int uniform_location, int dimensions, int count, gboolean transpose, const float *value); These are similar to the old functions used to set uniforms on a CoglProgram. To get a value to pass in as the uniform_location there is also: int cogl_pipeline_get_uniform_location (CoglPipeline *pipeline, const char *uniform_name); Conceptually the uniform locations are tied to the pipeline so that whenever setting a value for a new pipeline the application is expected to call this function. However in practice the uniform locations are global to the CoglContext. The names are stored in a linked list where the position in the list is the uniform location. The global indices are used so that each pipeline can store a mask of which uniforms it overrides. That way it is quicker to detect which uniforms are different from the last pipeline that used the same CoglProgramState so it can avoid flushing uniforms that haven't changed. Currently the values are not actually compared which means that it will only avoid flushing a uniform if there is a common ancestor that sets the value (or if the same pipeline is being flushed again - in which case the pipeline and its common ancestor are the same thing). The uniform values are stored in the big state of the pipeline as a sparse linked list. A bitmask stores which values have been overridden and only overridden values are stored in the linked list. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-03 13:20:43 -04:00
void
_cogl_pipeline_compare_uniform_differences (unsigned long *differences,
CoglPipeline *pipeline0,
CoglPipeline *pipeline1);
#endif /* __COGL_PIPELINE_STATE_PRIVATE_H */