mutter/cogl/cogl-texture-private.h

410 lines
14 KiB
C
Raw Normal View History

/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* A Low Level GPU Graphics and Utilities API
*
* Copyright (C) 2007,2008,2009 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*
*/
#ifndef __COGL_TEXTURE_PRIVATE_H
#define __COGL_TEXTURE_PRIVATE_H
#include "cogl-bitmap-private.h"
#include "cogl-object-private.h"
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
#include "cogl-pipeline-private.h"
#include "cogl-spans.h"
#include "cogl-meta-texture.h"
Change API so that CoglPixelBuffer no longer knows its w/h/format The idea is that CoglPixelBuffer should just be a buffer that can be used for pixel data and it has no idea about the details of any images that are stored in it. This is analogous to CoglAttributeBuffer which itself does not have any information about the attributes. When you want to use a pixel buffer you should create a CoglBitmap which points to a region of the attribute buffer and provides the extra needed information such as the width, height and format. That way it is also possible to use a single CoglPixelBuffer with multiple bitmaps. The changes that are made are: • cogl_pixel_buffer_new_with_size has been removed and in its place is cogl_bitmap_new_with_size. This will create a pixel buffer at the right size and rowstride for the given width/height/format and immediately create a single CoglBitmap to point into it. The old function had an out-parameter for the stride of the image but with the new API this should be queriable from the bitmap (although there is no function for this yet). • There is now a public cogl_pixel_buffer_new constructor. This takes a size in bytes and data pointer similarly to cogl_attribute_buffer_new. • cogl_texture_new_from_buffer has been removed. If you want to create a texture from a pixel buffer you should wrap it up in a bitmap first. There is already API to create a texture from a bitmap. This patch also does a bit of header juggling because cogl-context.h was including cogl-texture.h and cogl-framebuffer.h which were causing some circular dependencies when cogl-bitmap.h includes cogl-context.h. These weren't actually needed in cogl-context.h itself but a few other headers were relying on them being included so this adds the #includes where necessary. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-02-25 15:04:45 -05:00
#include "cogl-framebuffer.h"
introduce texture loaders to make allocations lazy This introduces the internal idea of texture loaders that track the state for loading and allocating a texture. This defers a lot more work until the texture is allocated. There are several intentions to this change: - provides a means for extending how textures are allocated without requiring all the parameters to be supplied in a single _texture_new() function call. - allow us to remove the internal_format argument from all _texture_new() apis since using CoglPixelFormat is bad way of expressing the internal format constraints because it is too specific. For now the internal_format arguments haven't actually been removed but this patch does introduce replacement apis for controlling the internal format: cogl_texture_set_components() lets you specify what components your texture needs when it is allocated. cogl_texture_set_premultiplied() lets you specify whether a texture data should be interpreted as premultiplied or not. - Enable us to support asynchronous texture loading + allocation in the future. Of note, the _new_from_data() texture constructors all continue to allocate textures immediately so that existing code doesn't need to be adapted to manage the lifetime of the data being uploaded. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6a83de9ef4210f380a31f410797447b365a8d02c) Note: Compared to the original patch, the ->premultipled state for textures isn't forced to be %TRUE in _cogl_texture_init since that effectively ignores the users explicitly given internal_format which was a mistake and on master that change should have been made in the patch that followed. The gtk-doc comments for cogl_texture_set_premultiplied() and cogl_texture_set_components() have also been updated in-line with this fix.
2013-06-23 11:18:18 -04:00
#ifdef COGL_HAS_EGL_SUPPORT
#include "cogl-egl-defines.h"
#endif
typedef struct _CoglTextureVtable CoglTextureVtable;
/* Encodes three possibiloities result of transforming a quad */
typedef enum {
/* quad doesn't cross the boundaries of a texture */
COGL_TRANSFORM_NO_REPEAT,
/* quad crosses boundaries, hardware wrap mode can handle */
COGL_TRANSFORM_HARDWARE_REPEAT,
/* quad crosses boundaries, needs software fallback;
* for a sliced texture, this might not actually involve
* repeating, just a quad crossing multiple slices */
COGL_TRANSFORM_SOFTWARE_REPEAT,
} CoglTransformResult;
/* Flags given to the pre_paint method */
typedef enum {
/* The texture is going to be used with filters that require
mipmapping. This gives the texture the opportunity to
automatically update the mipmap tree */
COGL_TEXTURE_NEEDS_MIPMAP = 1
} CoglTexturePrePaintFlags;
struct _CoglTextureVtable
{
/* Virtual functions that must be implemented for a texture
backend */
CoglBool is_primitive;
CoglBool (* allocate) (CoglTexture *tex,
CoglError **error);
/* This should update the specified sub region of the texture with a
sub region of the given bitmap. The bitmap is not converted
before being set so the caller is expected to have called
_cogl_bitmap_convert_for_upload with a suitable internal_format
before passing here */
Allow propogation of OOM errors to apps This allows apps to catch out-of-memory errors when allocating textures. Textures can be pretty huge at times and so it's quite possible for an application to try and allocate more memory than is available. It's also very possible that the application can take some action in response to reduce memory pressure (such as freeing up texture caches perhaps) so we shouldn't just automatically abort like we do for trivial heap allocations. These public functions now take a CoglError argument so applications can catch out of memory errors: cogl_buffer_map cogl_buffer_map_range cogl_buffer_set_data cogl_framebuffer_read_pixels_into_bitmap cogl_pixel_buffer_new cogl_texture_new_from_data cogl_texture_new_from_bitmap Note: we've been quite conservative with how many apis we let throw OOM CoglErrors since we don't really want to put a burdon on developers to be checking for errors with every cogl api call. So long as there is some lower level api for apps to use that let them catch OOM errors for everything necessary that's enough and we don't have to make more convenient apis more awkward to use. The main focus is on bitmaps and texture allocations since they can be particularly large and prone to failing. A new cogl_attribute_buffer_new_with_size() function has been added in case developers need to catch OOM errors when allocating attribute buffers whereby they can first use _buffer_new_with_size() (which doesn't take a CoglError) followed by cogl_buffer_set_data() which will lazily allocate the buffer storage and report OOM errors. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978) Note: since we can't break the API for Cogl 1.x then actually the main purpose of cherry picking this patch is to keep in-line with changes on the master branch so that we can easily cherry-pick patches. All the api changes relating stable apis released on the 1.12 branch have been reverted as part of cherry-picking this patch so this most just applies all the internal plumbing changes that enable us to correctly propagate OOM errors.
2012-11-08 12:54:10 -05:00
CoglBool (* set_region) (CoglTexture *tex,
int src_x,
int src_y,
int dst_x,
int dst_y,
int dst_width,
int dst_height,
int level,
Allow propogation of OOM errors to apps This allows apps to catch out-of-memory errors when allocating textures. Textures can be pretty huge at times and so it's quite possible for an application to try and allocate more memory than is available. It's also very possible that the application can take some action in response to reduce memory pressure (such as freeing up texture caches perhaps) so we shouldn't just automatically abort like we do for trivial heap allocations. These public functions now take a CoglError argument so applications can catch out of memory errors: cogl_buffer_map cogl_buffer_map_range cogl_buffer_set_data cogl_framebuffer_read_pixels_into_bitmap cogl_pixel_buffer_new cogl_texture_new_from_data cogl_texture_new_from_bitmap Note: we've been quite conservative with how many apis we let throw OOM CoglErrors since we don't really want to put a burdon on developers to be checking for errors with every cogl api call. So long as there is some lower level api for apps to use that let them catch OOM errors for everything necessary that's enough and we don't have to make more convenient apis more awkward to use. The main focus is on bitmaps and texture allocations since they can be particularly large and prone to failing. A new cogl_attribute_buffer_new_with_size() function has been added in case developers need to catch OOM errors when allocating attribute buffers whereby they can first use _buffer_new_with_size() (which doesn't take a CoglError) followed by cogl_buffer_set_data() which will lazily allocate the buffer storage and report OOM errors. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978) Note: since we can't break the API for Cogl 1.x then actually the main purpose of cherry picking this patch is to keep in-line with changes on the master branch so that we can easily cherry-pick patches. All the api changes relating stable apis released on the 1.12 branch have been reverted as part of cherry-picking this patch so this most just applies all the internal plumbing changes that enable us to correctly propagate OOM errors.
2012-11-08 12:54:10 -05:00
CoglBitmap *bitmap,
CoglError **error);
/* This should copy the image data of the texture into @data. The
requested format will have been first passed through
ctx->texture_driver->find_best_gl_get_data_format so it should
always be a format that is valid for GL (ie, no conversion should
be necessary). */
CoglBool (* get_data) (CoglTexture *tex,
CoglPixelFormat format,
int rowstride,
uint8_t *data);
void (* foreach_sub_texture_in_region) (CoglTexture *tex,
float virtual_tx_1,
float virtual_ty_1,
float virtual_tx_2,
float virtual_ty_2,
CoglMetaTextureCallback callback,
void *user_data);
cogl: improves header and coding style consistency We've had complaints that our Cogl code/headers are a bit "special" so this is a first pass at tidying things up by giving them some consistency. These changes are all consistent with how new code in Cogl is being written, but the style isn't consistently applied across all code yet. There are two parts to this patch; but since each one required a large amount of effort to maintain tidy indenting it made sense to combine the changes to reduce the time spent re indenting the same lines. The first change is to use a consistent style for declaring function prototypes in headers. Cogl headers now consistently use this style for prototypes: return_type cogl_function_name (CoglType arg0, CoglType arg1); Not everyone likes this style, but it seems that most of the currently active Cogl developers agree on it. The second change is to constrain the use of redundant glib data types in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all been replaced with int, unsigned int, float, long, unsigned long and char respectively. When talking about pixel data; use of guchar has been replaced with guint8, otherwise unsigned char can be used. The glib types that we continue to use for portability are gboolean, gint{8,16,32,64}, guint{8,16,32,64} and gsize. The general intention is that Cogl should look palatable to the widest range of C programmers including those outside the Gnome community so - especially for the public API - we want to minimize the number of foreign looking typedefs.
2010-02-09 20:57:32 -05:00
int (* get_max_waste) (CoglTexture *tex);
CoglBool (* is_sliced) (CoglTexture *tex);
CoglBool (* can_hardware_repeat) (CoglTexture *tex);
void (* transform_coords_to_gl) (CoglTexture *tex,
float *s,
float *t);
CoglTransformResult (* transform_quad_coords_to_gl) (CoglTexture *tex,
float *coords);
CoglBool (* get_gl_texture) (CoglTexture *tex,
GLuint *out_gl_handle,
GLenum *out_gl_target);
/* OpenGL driver specific virtual function */
void (* gl_flush_legacy_texobj_filters) (CoglTexture *tex,
GLenum min_filter,
GLenum mag_filter);
void (* pre_paint) (CoglTexture *tex, CoglTexturePrePaintFlags flags);
2010-01-18 04:22:04 -05:00
void (* ensure_non_quad_rendering) (CoglTexture *tex);
/* OpenGL driver specific virtual function */
void (* gl_flush_legacy_texobj_wrap_modes) (CoglTexture *tex,
GLenum wrap_mode_s,
GLenum wrap_mode_t,
GLenum wrap_mode_p);
CoglPixelFormat (* get_format) (CoglTexture *tex);
GLenum (* get_gl_format) (CoglTexture *tex);
CoglTextureType (* get_type) (CoglTexture *tex);
CoglBool (* is_foreign) (CoglTexture *tex);
/* Only needs to be implemented if is_primitive == TRUE */
void (* set_auto_mipmap) (CoglTexture *texture,
CoglBool value);
};
introduce texture loaders to make allocations lazy This introduces the internal idea of texture loaders that track the state for loading and allocating a texture. This defers a lot more work until the texture is allocated. There are several intentions to this change: - provides a means for extending how textures are allocated without requiring all the parameters to be supplied in a single _texture_new() function call. - allow us to remove the internal_format argument from all _texture_new() apis since using CoglPixelFormat is bad way of expressing the internal format constraints because it is too specific. For now the internal_format arguments haven't actually been removed but this patch does introduce replacement apis for controlling the internal format: cogl_texture_set_components() lets you specify what components your texture needs when it is allocated. cogl_texture_set_premultiplied() lets you specify whether a texture data should be interpreted as premultiplied or not. - Enable us to support asynchronous texture loading + allocation in the future. Of note, the _new_from_data() texture constructors all continue to allocate textures immediately so that existing code doesn't need to be adapted to manage the lifetime of the data being uploaded. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6a83de9ef4210f380a31f410797447b365a8d02c) Note: Compared to the original patch, the ->premultipled state for textures isn't forced to be %TRUE in _cogl_texture_init since that effectively ignores the users explicitly given internal_format which was a mistake and on master that change should have been made in the patch that followed. The gtk-doc comments for cogl_texture_set_premultiplied() and cogl_texture_set_components() have also been updated in-line with this fix.
2013-06-23 11:18:18 -04:00
typedef enum _CoglTextureSoureType {
COGL_TEXTURE_SOURCE_TYPE_SIZED = 1,
COGL_TEXTURE_SOURCE_TYPE_BITMAP,
COGL_TEXTURE_SOURCE_TYPE_EGL_IMAGE,
COGL_TEXTURE_SOURCE_TYPE_GL_FOREIGN
} CoglTextureSourceType;
typedef struct _CoglTextureLoader
{
CoglTextureSourceType src_type;
union {
struct {
int width;
int height;
int depth; /* for 3d textures */
} sized;
struct {
CoglBitmap *bitmap;
int height; /* for 3d textures */
int depth; /* for 3d textures */
CoglBool can_convert_in_place;
} bitmap;
#if defined (COGL_HAS_EGL_SUPPORT) && defined (EGL_KHR_image_base)
struct {
EGLImageKHR image;
int width;
int height;
CoglPixelFormat format;
} egl_image;
#endif
struct {
int width;
int height;
unsigned int gl_handle;
CoglPixelFormat format;
} gl_foreign;
} src;
} CoglTextureLoader;
struct _CoglTexture
{
CoglObject _parent;
CoglContext *context;
introduce texture loaders to make allocations lazy This introduces the internal idea of texture loaders that track the state for loading and allocating a texture. This defers a lot more work until the texture is allocated. There are several intentions to this change: - provides a means for extending how textures are allocated without requiring all the parameters to be supplied in a single _texture_new() function call. - allow us to remove the internal_format argument from all _texture_new() apis since using CoglPixelFormat is bad way of expressing the internal format constraints because it is too specific. For now the internal_format arguments haven't actually been removed but this patch does introduce replacement apis for controlling the internal format: cogl_texture_set_components() lets you specify what components your texture needs when it is allocated. cogl_texture_set_premultiplied() lets you specify whether a texture data should be interpreted as premultiplied or not. - Enable us to support asynchronous texture loading + allocation in the future. Of note, the _new_from_data() texture constructors all continue to allocate textures immediately so that existing code doesn't need to be adapted to manage the lifetime of the data being uploaded. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6a83de9ef4210f380a31f410797447b365a8d02c) Note: Compared to the original patch, the ->premultipled state for textures isn't forced to be %TRUE in _cogl_texture_init since that effectively ignores the users explicitly given internal_format which was a mistake and on master that change should have been made in the patch that followed. The gtk-doc comments for cogl_texture_set_premultiplied() and cogl_texture_set_components() have also been updated in-line with this fix.
2013-06-23 11:18:18 -04:00
CoglTextureLoader *loader;
GList *framebuffers;
int max_level;
int width;
int height;
CoglBool allocated;
introduce texture loaders to make allocations lazy This introduces the internal idea of texture loaders that track the state for loading and allocating a texture. This defers a lot more work until the texture is allocated. There are several intentions to this change: - provides a means for extending how textures are allocated without requiring all the parameters to be supplied in a single _texture_new() function call. - allow us to remove the internal_format argument from all _texture_new() apis since using CoglPixelFormat is bad way of expressing the internal format constraints because it is too specific. For now the internal_format arguments haven't actually been removed but this patch does introduce replacement apis for controlling the internal format: cogl_texture_set_components() lets you specify what components your texture needs when it is allocated. cogl_texture_set_premultiplied() lets you specify whether a texture data should be interpreted as premultiplied or not. - Enable us to support asynchronous texture loading + allocation in the future. Of note, the _new_from_data() texture constructors all continue to allocate textures immediately so that existing code doesn't need to be adapted to manage the lifetime of the data being uploaded. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6a83de9ef4210f380a31f410797447b365a8d02c) Note: Compared to the original patch, the ->premultipled state for textures isn't forced to be %TRUE in _cogl_texture_init since that effectively ignores the users explicitly given internal_format which was a mistake and on master that change should have been made in the patch that followed. The gtk-doc comments for cogl_texture_set_premultiplied() and cogl_texture_set_components() have also been updated in-line with this fix.
2013-06-23 11:18:18 -04:00
/*
* Internal format
*/
CoglTextureComponents components;
unsigned int premultiplied:1;
const CoglTextureVtable *vtable;
};
typedef enum _CoglTextureChangeFlags
{
/* Whenever the internals of a texture are changed such that the
* underlying GL textures that represent the CoglTexture change then
* we notify cogl-material.c via
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
* _cogl_pipeline_texture_pre_change_notify
*/
COGL_TEXTURE_CHANGE_GL_TEXTURES
} CoglTextureChangeFlags;
typedef struct _CoglTexturePixel CoglTexturePixel;
/* This is used by the texture backends to store the first pixel of
each GL texture. This is only used when glGenerateMipmap is not
available so that we can temporarily set GL_GENERATE_MIPMAP and
reupload a pixel */
struct _CoglTexturePixel
{
/* We need to store the format of the pixel because we store the
data in the source format which might end up being different for
each slice if a subregion is updated with a different format */
GLenum gl_format;
GLenum gl_type;
uint8_t data[4];
};
void
_cogl_texture_init (CoglTexture *texture,
CoglContext *ctx,
int width,
int height,
CoglPixelFormat src_format,
introduce texture loaders to make allocations lazy This introduces the internal idea of texture loaders that track the state for loading and allocating a texture. This defers a lot more work until the texture is allocated. There are several intentions to this change: - provides a means for extending how textures are allocated without requiring all the parameters to be supplied in a single _texture_new() function call. - allow us to remove the internal_format argument from all _texture_new() apis since using CoglPixelFormat is bad way of expressing the internal format constraints because it is too specific. For now the internal_format arguments haven't actually been removed but this patch does introduce replacement apis for controlling the internal format: cogl_texture_set_components() lets you specify what components your texture needs when it is allocated. cogl_texture_set_premultiplied() lets you specify whether a texture data should be interpreted as premultiplied or not. - Enable us to support asynchronous texture loading + allocation in the future. Of note, the _new_from_data() texture constructors all continue to allocate textures immediately so that existing code doesn't need to be adapted to manage the lifetime of the data being uploaded. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6a83de9ef4210f380a31f410797447b365a8d02c) Note: Compared to the original patch, the ->premultipled state for textures isn't forced to be %TRUE in _cogl_texture_init since that effectively ignores the users explicitly given internal_format which was a mistake and on master that change should have been made in the patch that followed. The gtk-doc comments for cogl_texture_set_premultiplied() and cogl_texture_set_components() have also been updated in-line with this fix.
2013-06-23 11:18:18 -04:00
CoglTextureLoader *loader,
const CoglTextureVtable *vtable);
void
_cogl_texture_free (CoglTexture *texture);
/* This is used to register a type to the list of handle types that
will be considered a texture in cogl_is_texture() */
void
_cogl_texture_register_texture_type (const CoglObjectClass *klass);
#define COGL_TEXTURE_DEFINE(TypeName, type_name) \
COGL_OBJECT_DEFINE_WITH_CODE_GTYPE \
(TypeName, type_name, \
_cogl_texture_register_texture_type (&_cogl_##type_name##_class))
#define COGL_TEXTURE_INTERNAL_DEFINE(TypeName, type_name) \
COGL_OBJECT_INTERNAL_DEFINE_WITH_CODE \
(TypeName, type_name, \
_cogl_texture_register_texture_type (&_cogl_##type_name##_class))
CoglBool
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
_cogl_texture_can_hardware_repeat (CoglTexture *texture);
void
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
_cogl_texture_transform_coords_to_gl (CoglTexture *texture,
float *s,
float *t);
CoglTransformResult
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
_cogl_texture_transform_quad_coords_to_gl (CoglTexture *texture,
2010-01-18 04:22:04 -05:00
float *coords);
[cogl] Move the texture filters to be a property of the material layer The texture filters are now a property of the material layer rather than the texture object. Whenever a texture is painted with a material it sets the filters on all of the GL textures in the Cogl texture. The filter is cached so that it won't be changed unnecessarily. The automatic mipmap generation has changed so that the mipmaps are only generated when the texture is painted instead of every time the data changes. Changing the texture sets a flag to mark that the mipmaps are dirty. This works better if the FBO extension is available because we can use glGenerateMipmap. If the extension is not available it will temporarily enable automatic mipmap generation and reupload the first pixel of each slice. This requires tracking the data for the first pixel. The COGL_TEXTURE_AUTO_MIPMAP flag has been replaced with COGL_TEXTURE_NO_AUTO_MIPMAP so that it will default to auto-mipmapping. The mipmap generation is now effectively free if you are not using a mipmap filter mode so you would only want to disable it if you had some special reason to generate your own mipmaps. ClutterTexture no longer has to store its own copy of the filter mode. Instead it stores it in the material and the property is directly set and read from that. This fixes problems with the filters getting out of sync when a cogl handle is set on the texture directly. It also avoids the mess of having to rerealize the texture if the filter quality changes to HIGH because Cogl will take of generating the mipmaps if needed.
2009-06-04 11:04:57 -04:00
void
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
_cogl_texture_pre_paint (CoglTexture *texture, CoglTexturePrePaintFlags flags);
[cogl] Move the texture filters to be a property of the material layer The texture filters are now a property of the material layer rather than the texture object. Whenever a texture is painted with a material it sets the filters on all of the GL textures in the Cogl texture. The filter is cached so that it won't be changed unnecessarily. The automatic mipmap generation has changed so that the mipmaps are only generated when the texture is painted instead of every time the data changes. Changing the texture sets a flag to mark that the mipmaps are dirty. This works better if the FBO extension is available because we can use glGenerateMipmap. If the extension is not available it will temporarily enable automatic mipmap generation and reupload the first pixel of each slice. This requires tracking the data for the first pixel. The COGL_TEXTURE_AUTO_MIPMAP flag has been replaced with COGL_TEXTURE_NO_AUTO_MIPMAP so that it will default to auto-mipmapping. The mipmap generation is now effectively free if you are not using a mipmap filter mode so you would only want to disable it if you had some special reason to generate your own mipmaps. ClutterTexture no longer has to store its own copy of the filter mode. Instead it stores it in the material and the property is directly set and read from that. This fixes problems with the filters getting out of sync when a cogl handle is set on the texture directly. It also avoids the mess of having to rerealize the texture if the filter quality changes to HIGH because Cogl will take of generating the mipmaps if needed.
2009-06-04 11:04:57 -04:00
2010-01-18 04:22:04 -05:00
void
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
_cogl_texture_ensure_non_quad_rendering (CoglTexture *texture);
2010-01-18 04:22:04 -05:00
introduce texture loaders to make allocations lazy This introduces the internal idea of texture loaders that track the state for loading and allocating a texture. This defers a lot more work until the texture is allocated. There are several intentions to this change: - provides a means for extending how textures are allocated without requiring all the parameters to be supplied in a single _texture_new() function call. - allow us to remove the internal_format argument from all _texture_new() apis since using CoglPixelFormat is bad way of expressing the internal format constraints because it is too specific. For now the internal_format arguments haven't actually been removed but this patch does introduce replacement apis for controlling the internal format: cogl_texture_set_components() lets you specify what components your texture needs when it is allocated. cogl_texture_set_premultiplied() lets you specify whether a texture data should be interpreted as premultiplied or not. - Enable us to support asynchronous texture loading + allocation in the future. Of note, the _new_from_data() texture constructors all continue to allocate textures immediately so that existing code doesn't need to be adapted to manage the lifetime of the data being uploaded. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6a83de9ef4210f380a31f410797447b365a8d02c) Note: Compared to the original patch, the ->premultipled state for textures isn't forced to be %TRUE in _cogl_texture_init since that effectively ignores the users explicitly given internal_format which was a mistake and on master that change should have been made in the patch that followed. The gtk-doc comments for cogl_texture_set_premultiplied() and cogl_texture_set_components() have also been updated in-line with this fix.
2013-06-23 11:18:18 -04:00
/*
* This determines a CoglPixelFormat according to texture::components
* and texture::premultiplied (i.e. the user required components and
* whether the texture should be considered premultiplied)
*
* A reference/source format can be given (or COGL_PIXEL_FORMAT_ANY)
* and wherever possible this function tries to simply return the
* given source format if its compatible with the required components.
*
* Texture backends can call this when allocating a texture to know
* how to convert a source image in preparation for uploading.
*/
CoglPixelFormat
introduce texture loaders to make allocations lazy This introduces the internal idea of texture loaders that track the state for loading and allocating a texture. This defers a lot more work until the texture is allocated. There are several intentions to this change: - provides a means for extending how textures are allocated without requiring all the parameters to be supplied in a single _texture_new() function call. - allow us to remove the internal_format argument from all _texture_new() apis since using CoglPixelFormat is bad way of expressing the internal format constraints because it is too specific. For now the internal_format arguments haven't actually been removed but this patch does introduce replacement apis for controlling the internal format: cogl_texture_set_components() lets you specify what components your texture needs when it is allocated. cogl_texture_set_premultiplied() lets you specify whether a texture data should be interpreted as premultiplied or not. - Enable us to support asynchronous texture loading + allocation in the future. Of note, the _new_from_data() texture constructors all continue to allocate textures immediately so that existing code doesn't need to be adapted to manage the lifetime of the data being uploaded. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6a83de9ef4210f380a31f410797447b365a8d02c) Note: Compared to the original patch, the ->premultipled state for textures isn't forced to be %TRUE in _cogl_texture_init since that effectively ignores the users explicitly given internal_format which was a mistake and on master that change should have been made in the patch that followed. The gtk-doc comments for cogl_texture_set_premultiplied() and cogl_texture_set_components() have also been updated in-line with this fix.
2013-06-23 11:18:18 -04:00
_cogl_texture_determine_internal_format (CoglTexture *texture,
CoglPixelFormat src_format);
/* This is called by texture backends when they have successfully
* allocated a texture.
*
* Most texture backends currently track the internal layout of
* textures using a CoglPixelFormat which will be finalized when a
* texture is allocated. At this point we need to update
* texture::components and texture::premultiplied according to the
* determined layout.
*
* XXX: Going forward we should probably aim to stop using
* CoglPixelFormat at all for tracking the internal layout of
* textures.
*/
void
_cogl_texture_set_internal_format (CoglTexture *texture,
CoglPixelFormat internal_format);
CoglBool
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
_cogl_texture_is_foreign (CoglTexture *texture);
void
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
_cogl_texture_associate_framebuffer (CoglTexture *texture,
CoglFramebuffer *framebuffer);
const GList *
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
_cogl_texture_get_associated_framebuffers (CoglTexture *texture);
void
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 16:30:34 -04:00
_cogl_texture_flush_journal_rendering (CoglTexture *texture);
void
_cogl_texture_spans_foreach_in_region (CoglSpan *x_spans,
int n_x_spans,
CoglSpan *y_spans,
int n_y_spans,
CoglTexture **textures,
float *virtual_coords,
float x_normalize_factor,
float y_normalize_factor,
CoglPipelineWrapMode wrap_x,
CoglPipelineWrapMode wrap_y,
CoglMetaTextureCallback callback,
void *user_data);
/*
* _cogl_texture_get_type:
* @texture: a #CoglTexture pointer
*
* Retrieves the texture type of the underlying hardware texture that
* this #CoglTexture will use.
*
* Return value: The type of the hardware texture.
*/
CoglTextureType
_cogl_texture_get_type (CoglTexture *texture);
CoglBool
_cogl_texture_set_region (CoglTexture *texture,
int width,
int height,
CoglPixelFormat format,
int rowstride,
const uint8_t *data,
int dst_x,
int dst_y,
int level,
CoglError **error);
Allow propogation of OOM errors to apps This allows apps to catch out-of-memory errors when allocating textures. Textures can be pretty huge at times and so it's quite possible for an application to try and allocate more memory than is available. It's also very possible that the application can take some action in response to reduce memory pressure (such as freeing up texture caches perhaps) so we shouldn't just automatically abort like we do for trivial heap allocations. These public functions now take a CoglError argument so applications can catch out of memory errors: cogl_buffer_map cogl_buffer_map_range cogl_buffer_set_data cogl_framebuffer_read_pixels_into_bitmap cogl_pixel_buffer_new cogl_texture_new_from_data cogl_texture_new_from_bitmap Note: we've been quite conservative with how many apis we let throw OOM CoglErrors since we don't really want to put a burdon on developers to be checking for errors with every cogl api call. So long as there is some lower level api for apps to use that let them catch OOM errors for everything necessary that's enough and we don't have to make more convenient apis more awkward to use. The main focus is on bitmaps and texture allocations since they can be particularly large and prone to failing. A new cogl_attribute_buffer_new_with_size() function has been added in case developers need to catch OOM errors when allocating attribute buffers whereby they can first use _buffer_new_with_size() (which doesn't take a CoglError) followed by cogl_buffer_set_data() which will lazily allocate the buffer storage and report OOM errors. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978) Note: since we can't break the API for Cogl 1.x then actually the main purpose of cherry picking this patch is to keep in-line with changes on the master branch so that we can easily cherry-pick patches. All the api changes relating stable apis released on the 1.12 branch have been reverted as part of cherry-picking this patch so this most just applies all the internal plumbing changes that enable us to correctly propagate OOM errors.
2012-11-08 12:54:10 -05:00
CoglBool
_cogl_texture_set_region_from_bitmap (CoglTexture *texture,
int src_x,
int src_y,
int width,
int height,
CoglBitmap *bmp,
Allow propogation of OOM errors to apps This allows apps to catch out-of-memory errors when allocating textures. Textures can be pretty huge at times and so it's quite possible for an application to try and allocate more memory than is available. It's also very possible that the application can take some action in response to reduce memory pressure (such as freeing up texture caches perhaps) so we shouldn't just automatically abort like we do for trivial heap allocations. These public functions now take a CoglError argument so applications can catch out of memory errors: cogl_buffer_map cogl_buffer_map_range cogl_buffer_set_data cogl_framebuffer_read_pixels_into_bitmap cogl_pixel_buffer_new cogl_texture_new_from_data cogl_texture_new_from_bitmap Note: we've been quite conservative with how many apis we let throw OOM CoglErrors since we don't really want to put a burdon on developers to be checking for errors with every cogl api call. So long as there is some lower level api for apps to use that let them catch OOM errors for everything necessary that's enough and we don't have to make more convenient apis more awkward to use. The main focus is on bitmaps and texture allocations since they can be particularly large and prone to failing. A new cogl_attribute_buffer_new_with_size() function has been added in case developers need to catch OOM errors when allocating attribute buffers whereby they can first use _buffer_new_with_size() (which doesn't take a CoglError) followed by cogl_buffer_set_data() which will lazily allocate the buffer storage and report OOM errors. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978) Note: since we can't break the API for Cogl 1.x then actually the main purpose of cherry picking this patch is to keep in-line with changes on the master branch so that we can easily cherry-pick patches. All the api changes relating stable apis released on the 1.12 branch have been reverted as part of cherry-picking this patch so this most just applies all the internal plumbing changes that enable us to correctly propagate OOM errors.
2012-11-08 12:54:10 -05:00
int dst_x,
int dst_y,
int level,
Allow propogation of OOM errors to apps This allows apps to catch out-of-memory errors when allocating textures. Textures can be pretty huge at times and so it's quite possible for an application to try and allocate more memory than is available. It's also very possible that the application can take some action in response to reduce memory pressure (such as freeing up texture caches perhaps) so we shouldn't just automatically abort like we do for trivial heap allocations. These public functions now take a CoglError argument so applications can catch out of memory errors: cogl_buffer_map cogl_buffer_map_range cogl_buffer_set_data cogl_framebuffer_read_pixels_into_bitmap cogl_pixel_buffer_new cogl_texture_new_from_data cogl_texture_new_from_bitmap Note: we've been quite conservative with how many apis we let throw OOM CoglErrors since we don't really want to put a burdon on developers to be checking for errors with every cogl api call. So long as there is some lower level api for apps to use that let them catch OOM errors for everything necessary that's enough and we don't have to make more convenient apis more awkward to use. The main focus is on bitmaps and texture allocations since they can be particularly large and prone to failing. A new cogl_attribute_buffer_new_with_size() function has been added in case developers need to catch OOM errors when allocating attribute buffers whereby they can first use _buffer_new_with_size() (which doesn't take a CoglError) followed by cogl_buffer_set_data() which will lazily allocate the buffer storage and report OOM errors. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978) Note: since we can't break the API for Cogl 1.x then actually the main purpose of cherry picking this patch is to keep in-line with changes on the master branch so that we can easily cherry-pick patches. All the api changes relating stable apis released on the 1.12 branch have been reverted as part of cherry-picking this patch so this most just applies all the internal plumbing changes that enable us to correctly propagate OOM errors.
2012-11-08 12:54:10 -05:00
CoglError **error);
CoglBool
_cogl_texture_needs_premult_conversion (CoglPixelFormat src_format,
CoglPixelFormat dst_format);
int
_cogl_texture_get_n_levels (CoglTexture *texture);
void
_cogl_texture_get_level_size (CoglTexture *texture,
int level,
int *width,
int *height,
int *depth);
void
_cogl_texture_set_allocated (CoglTexture *texture,
introduce texture loaders to make allocations lazy This introduces the internal idea of texture loaders that track the state for loading and allocating a texture. This defers a lot more work until the texture is allocated. There are several intentions to this change: - provides a means for extending how textures are allocated without requiring all the parameters to be supplied in a single _texture_new() function call. - allow us to remove the internal_format argument from all _texture_new() apis since using CoglPixelFormat is bad way of expressing the internal format constraints because it is too specific. For now the internal_format arguments haven't actually been removed but this patch does introduce replacement apis for controlling the internal format: cogl_texture_set_components() lets you specify what components your texture needs when it is allocated. cogl_texture_set_premultiplied() lets you specify whether a texture data should be interpreted as premultiplied or not. - Enable us to support asynchronous texture loading + allocation in the future. Of note, the _new_from_data() texture constructors all continue to allocate textures immediately so that existing code doesn't need to be adapted to manage the lifetime of the data being uploaded. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6a83de9ef4210f380a31f410797447b365a8d02c) Note: Compared to the original patch, the ->premultipled state for textures isn't forced to be %TRUE in _cogl_texture_init since that effectively ignores the users explicitly given internal_format which was a mistake and on master that change should have been made in the patch that followed. The gtk-doc comments for cogl_texture_set_premultiplied() and cogl_texture_set_components() have also been updated in-line with this fix.
2013-06-23 11:18:18 -04:00
CoglPixelFormat internal_format,
int width,
int height);
CoglPixelFormat
_cogl_texture_get_format (CoglTexture *texture);
introduce texture loaders to make allocations lazy This introduces the internal idea of texture loaders that track the state for loading and allocating a texture. This defers a lot more work until the texture is allocated. There are several intentions to this change: - provides a means for extending how textures are allocated without requiring all the parameters to be supplied in a single _texture_new() function call. - allow us to remove the internal_format argument from all _texture_new() apis since using CoglPixelFormat is bad way of expressing the internal format constraints because it is too specific. For now the internal_format arguments haven't actually been removed but this patch does introduce replacement apis for controlling the internal format: cogl_texture_set_components() lets you specify what components your texture needs when it is allocated. cogl_texture_set_premultiplied() lets you specify whether a texture data should be interpreted as premultiplied or not. - Enable us to support asynchronous texture loading + allocation in the future. Of note, the _new_from_data() texture constructors all continue to allocate textures immediately so that existing code doesn't need to be adapted to manage the lifetime of the data being uploaded. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 6a83de9ef4210f380a31f410797447b365a8d02c) Note: Compared to the original patch, the ->premultipled state for textures isn't forced to be %TRUE in _cogl_texture_init since that effectively ignores the users explicitly given internal_format which was a mistake and on master that change should have been made in the patch that followed. The gtk-doc comments for cogl_texture_set_premultiplied() and cogl_texture_set_components() have also been updated in-line with this fix.
2013-06-23 11:18:18 -04:00
CoglTextureLoader *
_cogl_texture_create_loader (void);
void
_cogl_texture_copy_internal_format (CoglTexture *src,
CoglTexture *dest);
#endif /* __COGL_TEXTURE_PRIVATE_H */