mutter/cogl/cogl-clip-stack.c

407 lines
12 KiB
C
Raw Normal View History

/*
* Cogl
*
* An object oriented GL/GLES Abstraction/Utility Layer
*
* Copyright (C) 2007,2008,2009,2010 Intel Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see
* <http://www.gnu.org/licenses/>.
*
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
#include <string.h>
#include <math.h>
#include <glib.h>
#include "cogl-clip-stack.h"
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
#include "cogl-primitives.h"
#include "cogl-context-private.h"
#include "cogl-framebuffer-private.h"
#include "cogl-journal-private.h"
#include "cogl-util.h"
#include "cogl-matrix-private.h"
#include "cogl-primitives-private.h"
Add internal _cogl_push_source to optionally disable legacy state Some code in Cogl such as when flushing a stencil clip assumes that it can push a temporary simple pipeline to reset to a known state for internal drawing operations. However this breaks down if the application has set any legacy state because that is set globally so it will also get applied to the internal pipeline. _cogl_draw_attributes already had an internal flag to disable applying the legacy state but I think this is quite awkward to use because not all places that push a pipeline draw the attribute buffers directly so it is difficult to pass the flag down through the layers. Conceptually the legacy state is meant to be like a layer on top of the purely pipeline-based state API so I think ideally we should have an internal function to push the source without the applying the legacy state. The legacy state can't be applied as the pipeline is pushed because the global state can be modified even after it is pushed. This patch adds a _cogl_push_source() function which takes an extra boolean flag to mark whether to enable the legacy state. The value of this flag is stored alongside the pipeline in the pipeline stack. Another new internal function called _cogl_get_enable_legacy_state queries whether the top entry in the pipeline stack has legacy state enabled. cogl-primitives and the vertex array drawing code now use this to determine whether to apply the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is now removed. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-14 07:17:09 -04:00
#include "cogl-private.h"
#include "cogl-pipeline-opengl-private.h"
#include "cogl-attribute-private.h"
#include "cogl-primitive-private.h"
#include "cogl1-context.h"
#include "cogl-offscreen.h"
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
#include "cogl-matrix-stack.h"
static void *
_cogl_clip_stack_push_entry (CoglClipStack *clip_stack,
size_t size,
CoglClipStackType type)
{
CoglClipStack *entry = g_slice_alloc (size);
/* The new entry starts with a ref count of 1 because the stack
holds a reference to it as it is the top entry */
entry->ref_count = 1;
entry->type = type;
entry->parent = clip_stack;
/* We don't need to take a reference to the parent from the entry
because the we are stealing the ref in the new stack top */
return entry;
}
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
static void
get_transformed_corners (float x_1,
float y_1,
float x_2,
float y_2,
CoglMatrix *modelview,
CoglMatrix *projection,
const float *viewport,
float *transformed_corners)
{
int i;
transformed_corners[0] = x_1;
transformed_corners[1] = y_1;
transformed_corners[2] = x_2;
transformed_corners[3] = y_1;
transformed_corners[4] = x_2;
transformed_corners[5] = y_2;
transformed_corners[6] = x_1;
transformed_corners[7] = y_2;
/* Project the coordinates to window space coordinates */
for (i = 0; i < 4; i++)
{
float *v = transformed_corners + i * 2;
_cogl_transform_point (modelview, projection, viewport, v, v + 1);
}
}
/* Sets the window-space bounds of the entry based on the projected
coordinates of the given rectangle */
static void
_cogl_clip_stack_entry_set_bounds (CoglClipStack *entry,
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
float *transformed_corners)
{
float min_x = G_MAXFLOAT, min_y = G_MAXFLOAT;
float max_x = -G_MAXFLOAT, max_y = -G_MAXFLOAT;
int i;
for (i = 0; i < 4; i++)
{
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
float *v = transformed_corners + i * 2;
if (v[0] > max_x)
max_x = v[0];
if (v[0] < min_x)
min_x = v[0];
if (v[1] > max_y)
max_y = v[1];
if (v[1] < min_y)
min_y = v[1];
}
entry->bounds_x0 = floorf (min_x);
entry->bounds_x1 = ceilf (max_x);
entry->bounds_y0 = floorf (min_y);
entry->bounds_y1 = ceilf (max_y);
}
CoglClipStack *
_cogl_clip_stack_push_window_rectangle (CoglClipStack *stack,
int x_offset,
int y_offset,
int width,
int height)
{
CoglClipStack *entry;
entry = _cogl_clip_stack_push_entry (stack,
sizeof (CoglClipStackWindowRect),
COGL_CLIP_STACK_WINDOW_RECT);
entry->bounds_x0 = x_offset;
entry->bounds_x1 = x_offset + width;
entry->bounds_y0 = y_offset;
entry->bounds_y1 = y_offset + height;
return entry;
}
CoglClipStack *
_cogl_clip_stack_push_rectangle (CoglClipStack *stack,
float x_1,
float y_1,
float x_2,
float y_2,
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
CoglMatrixEntry *modelview_entry,
CoglMatrixEntry *projection_entry,
const float *viewport)
{
CoglClipStackRect *entry;
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
CoglMatrix modelview;
CoglMatrix projection;
CoglMatrix modelview_projection;
/* Corners of the given rectangle in an clockwise order:
* (0, 1) (2, 3)
*
*
*
* (6, 7) (4, 5)
*/
float rect[] = {
x_1, y_1,
x_2, y_1,
x_2, y_2,
x_1, y_2
};
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
/* Make a new entry */
entry = _cogl_clip_stack_push_entry (stack,
sizeof (CoglClipStackRect),
COGL_CLIP_STACK_RECT);
entry->x0 = x_1;
entry->y0 = y_1;
entry->x1 = x_2;
entry->y1 = y_2;
entry->matrix_entry = cogl_matrix_entry_ref (modelview_entry);
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
cogl_matrix_entry_get (modelview_entry, &modelview);
cogl_matrix_entry_get (projection_entry, &projection);
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
cogl_matrix_multiply (&modelview_projection,
&projection,
&modelview);
/* Technically we could avoid the viewport transform at this point
* if we want to make this a bit faster. */
_cogl_transform_point (&modelview, &projection, viewport, &rect[0], &rect[1]);
_cogl_transform_point (&modelview, &projection, viewport, &rect[2], &rect[3]);
_cogl_transform_point (&modelview, &projection, viewport, &rect[4], &rect[5]);
_cogl_transform_point (&modelview, &projection, viewport, &rect[6], &rect[7]);
/* If the fully transformed rectangle isn't still axis aligned we
* can't handle it using a scissor.
*
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
* We don't use an epsilon here since we only really aim to catch
* simple cases where the transform doesn't leave the rectangle screen
* aligned and don't mind some false positives.
*/
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
if (rect[0] != rect[6] ||
rect[1] != rect[3] ||
rect[2] != rect[4] ||
rect[7] != rect[5])
{
entry->can_be_scissor = FALSE;
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
_cogl_clip_stack_entry_set_bounds ((CoglClipStack *) entry,
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
rect);
}
else
{
CoglClipStack *base_entry = (CoglClipStack *) entry;
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
x_1 = rect[0];
y_1 = rect[1];
x_2 = rect[4];
y_2 = rect[5];
/* Consider that the modelview matrix may flip the rectangle
* along the x or y axis... */
#define SWAP(A,B) do { float tmp = B; B = A; A = tmp; } while (0)
if (x_1 > x_2)
SWAP (x_1, x_2);
if (y_1 > y_2)
SWAP (y_1, y_2);
#undef SWAP
base_entry->bounds_x0 = COGL_UTIL_NEARBYINT (x_1);
base_entry->bounds_y0 = COGL_UTIL_NEARBYINT (y_1);
base_entry->bounds_x1 = COGL_UTIL_NEARBYINT (x_2);
base_entry->bounds_y1 = COGL_UTIL_NEARBYINT (y_2);
entry->can_be_scissor = TRUE;
}
return (CoglClipStack *) entry;
}
CoglClipStack *
_cogl_clip_stack_push_primitive (CoglClipStack *stack,
CoglPrimitive *primitive,
float bounds_x1,
float bounds_y1,
float bounds_x2,
float bounds_y2,
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
CoglMatrixEntry *modelview_entry,
CoglMatrixEntry *projection_entry,
const float *viewport)
{
CoglClipStackPrimitive *entry;
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
CoglMatrix modelview;
CoglMatrix projection;
float transformed_corners[8];
entry = _cogl_clip_stack_push_entry (stack,
sizeof (CoglClipStackPrimitive),
COGL_CLIP_STACK_PRIMITIVE);
entry->primitive = cogl_object_ref (primitive);
entry->matrix_entry = cogl_matrix_entry_ref (modelview_entry);
entry->bounds_x1 = bounds_x1;
entry->bounds_y1 = bounds_y1;
entry->bounds_x2 = bounds_x2;
entry->bounds_y2 = bounds_y2;
cogl_matrix_entry_get (modelview_entry, &modelview);
cogl_matrix_entry_get (modelview_entry, &projection);
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
get_transformed_corners (bounds_x1, bounds_y1, bounds_x2, bounds_y2,
&modelview,
&projection,
viewport,
transformed_corners);
/* NB: this is referring to the bounds in window coordinates as opposed
* to the bounds above in primitive local coordinates. */
_cogl_clip_stack_entry_set_bounds ((CoglClipStack *) entry,
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
transformed_corners);
return (CoglClipStack *) entry;
}
CoglClipStack *
_cogl_clip_stack_ref (CoglClipStack *entry)
{
/* A NULL pointer is considered a valid stack so we should accept
that as an argument */
if (entry)
entry->ref_count++;
return entry;
}
void
_cogl_clip_stack_unref (CoglClipStack *entry)
{
/* Unref all of the entries until we hit the root of the list or the
entry still has a remaining reference */
while (entry && --entry->ref_count <= 0)
{
CoglClipStack *parent = entry->parent;
switch (entry->type)
{
case COGL_CLIP_STACK_RECT:
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
{
CoglClipStackRect *rect = (CoglClipStackRect *) entry;
cogl_matrix_entry_unref (rect->matrix_entry);
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
g_slice_free1 (sizeof (CoglClipStackRect), entry);
break;
}
case COGL_CLIP_STACK_WINDOW_RECT:
g_slice_free1 (sizeof (CoglClipStackWindowRect), entry);
break;
case COGL_CLIP_STACK_PRIMITIVE:
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
{
CoglClipStackPrimitive *primitive_entry =
(CoglClipStackPrimitive *) entry;
cogl_matrix_entry_unref (primitive_entry->matrix_entry);
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
cogl_object_unref (primitive_entry->primitive);
g_slice_free1 (sizeof (CoglClipStackPrimitive), entry);
break;
}
default:
g_assert_not_reached ();
}
entry = parent;
}
}
CoglClipStack *
_cogl_clip_stack_pop (CoglClipStack *stack)
{
CoglClipStack *new_top;
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
_COGL_RETURN_VAL_IF_FAIL (stack != NULL, NULL);
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
/* To pop we are moving the top of the stack to the old top's parent
node. The stack always needs to have a reference to the top entry
so we must take a reference to the new top. The stack would have
previously had a reference to the old top so we need to decrease
the ref count on that. We need to ref the new head first in case
this stack was the only thing referencing the old top. In that
case the call to _cogl_clip_stack_entry_unref will unref the
parent. */
new_top = stack->parent;
_cogl_clip_stack_ref (new_top);
_cogl_clip_stack_unref (stack);
return new_top;
}
void
_cogl_clip_stack_get_bounds (CoglClipStack *stack,
int *scissor_x0,
int *scissor_y0,
int *scissor_x1,
int *scissor_y1)
{
CoglClipStack *entry;
*scissor_x0 = 0;
*scissor_y0 = 0;
*scissor_x1 = G_MAXINT;
*scissor_y1 = G_MAXINT;
for (entry = stack; entry; entry = entry->parent)
{
/* Get the intersection of the current scissor and the bounding
box of this clip */
_cogl_util_scissor_intersect (entry->bounds_x0,
entry->bounds_y0,
entry->bounds_x1,
entry->bounds_y1,
scissor_x0,
scissor_y0,
scissor_x1,
scissor_y1);
}
}
void
_cogl_clip_stack_flush (CoglClipStack *stack,
CoglFramebuffer *framebuffer)
{
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
CoglContext *ctx = framebuffer->context;
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
ctx->driver_vtable->clip_stack_flush (stack, framebuffer);
}