brl/mutter
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
wip/nielsdg/uncrustify-test
mutter/cogl/configure.ac

747 lines
26 KiB
Plaintext
Raw Permalink Normal View History

Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AC_PREREQ(2.59)
cogl: Remove notion of a "cogl" version Mutters copy of cogl isn't a separate library with its own version, so remove the old version macros.
2018-05-07 10:14:29 -04:00
AC_INIT(cogl, [0.1])
README: Fix the required version number replacements The README file is generated by the configure script so that it can include the required dependency version numbers. However there was no corresponding AC_SUBST calls for the versions so the README would be left with @THESE_MARKERS@.
2011-07-01 11:20:32 -04:00
AC_CONFIG_SRCDIR(cogl/cogl.h)
AC_CONFIG_AUX_DIR([build])
AC_CONFIG_MACRO_DIR([build/autotools])
Don't use config.h in clutter and cogl In cogl use cogl-config.h and in clutter use clutter-build-config.h. We can't use clutter-config.h in clutter because its already used and installed. https://bugzilla.gnome.org/show_bug.cgi?id=768976
2016-05-05 10:21:51 -04:00
AC_CONFIG_HEADERS(cogl-config.h)
Make it possible to include private cogl API from mutter If we want to put a cogl winsys backend in mutter, that backend need to have access to the internal workings of cogl. https://bugzilla.gnome.org/show_bug.cgi?id=768976
2016-05-06 04:08:30 -04:00
AC_CONFIG_HEADERS(cogl-mutter-config.h)
configure: use AC_GNU_SOURCE This adds the AC_GNU_SOURCE macro to configure.ac to ensure _GNU_SOURCE is defined while compiling Cogl. This is required to use memmem for example. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1ed717dc12fc4d2cb49010232de93ff46684aa6a)
2012-08-15 08:19:22 -04:00
AC_GNU_SOURCE
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
Make libmutter and friends parallel installable In order to minimize the amount of breakage, while at the same time making it easier to make backward incompatible changes needed to continue turning libmutter into a capable Wayland compositor, make the libmutter and friends (libmutter-clutter, libmutter-cogl*) parallel installable by adding a version number to the name. This changes various filenames, for example what previously was libmutter.so is now libmutter-0.so (assuming the version for now is 0), and libmutter-clutter-1.0.so is now libmutter-clutter-0.so. The pkg-config filenames and GObject introspection has been renamed to reflect this as well. This enables a downstream compositor rely on a specific version of the libmutter API, while gracefully handling API/ABI changes by having to update to the new version at their own pace. https://bugzilla.gnome.org/show_bug.cgi?id=777317
2016-11-25 11:16:07 -05:00
dnl ================================================================
dnl Check that we are configured by mutter
dnl ================================================================
AC_ARG_VAR([MUTTER_VERSION])
AC_ARG_VAR([LIBMUTTER_API_VERSION])
AS_IF([test "x$MUTTER_VERSION" = "x"],
[AC_MSG_ERROR([Clutter can only be configured by mutter])],)
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ================================================================
dnl Required versions for dependencies
dnl ================================================================
build: Bump the glib dependency to 2.32 As far as I can tell the --symbol-prefix option wasn't there before glib 2.32's glib-mkenums. So cogl effectively depends on glib 2.32. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 4e952532a29b2566caf658705f815b7aec732265)
2012-09-13 12:43:11 -04:00
m4_define([glib_req_version], [2.32.0])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
m4_define([pangocairo_req_version], [1.20])
m4_define([gi_req_version], [0.9.5])
m4_define([gdk_pixbuf_req_version], [2.0])
m4_define([uprof_req_version], [0.3])
m4_define([xfixes_req_version], [3])
m4_define([xcomposite_req_version], [0.4])
Add CoglOutput and track for the GLX backend The CoglOutput object represents one output such as a monitor or laptop panel, with information about attributes of the output such as the position of the output within the global coordinate space, and the refresh rate. We don't yet publically export the ability to get output information but we track it for the GLX backend, where we'll use it to track the refresh rate. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit d7ef9d8d71488d0e6874f1ffc6e48700d5c82a31)
2012-11-12 11:31:16 -05:00
m4_define([xrandr_req_version], [1.2])
README: Fix the required version number replacements The README file is generated by the configure script so that it can include the required dependency version numbers. However there was no corresponding AC_SUBST calls for the versions so the README would be left with @THESE_MARKERS@.
2011-07-01 11:20:32 -04:00
m4_define([cairo_req_version], [1.10])
Set the minimum required wayland-server version to 1.1.90 Since the Wayland server support has been updated to use wl_shm_buffer we need the latest git version of Wayland to build. Previously the configure.ac file only had one define for the minimum version of both the client-side and server-side support but as they are now different this patch splits them out. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 75d62292fc268164f8a085225033abe17e59ba1c)
2013-07-01 09:06:16 -04:00
m4_define([wayland_server_req_version], [1.1.90])
cogl: add Mir EGL platform
2014-11-17 09:49:20 -05:00
m4_define([mirclient_req_version], [0.9.0])
README: Fix the required version number replacements The README file is generated by the configure script so that it can include the required dependency version numbers. However there was no corresponding AC_SUBST calls for the versions so the README would be left with @THESE_MARKERS@.
2011-07-01 11:20:32 -04:00
dnl These variables get copied into the generated README
AC_SUBST([GLIB_REQ_VERSION], [glib_req_version])
AC_SUBST([GDK_PIXBUF_REQ_VERSION], [gdk_pixbuf_req_version])
AC_SUBST([CAIRO_REQ_VERSION], [cairo_req_version])
AC_SUBST([PANGOCAIRO_REQ_VERSION], [pangocairo_req_version])
AC_SUBST([XCOMPOSITE_REQ_VERSION], [xcomposite_req_version])
AC_SUBST([XFIXES_REQ_VERSION], [xfixes_req_version])
AC_SUBST([GI_REQ_VERSION], [gi_req_version])
AC_SUBST([UPROF_REQ_VERSION], [uprof_req_version])
Set the minimum required wayland-server version to 1.1.90 Since the Wayland server support has been updated to use wl_shm_buffer we need the latest git version of Wayland to build. Previously the configure.ac file only had one define for the minimum version of both the client-side and server-side support but as they are now different this patch splits them out. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 75d62292fc268164f8a085225033abe17e59ba1c)
2013-07-01 09:06:16 -04:00
AC_SUBST([WAYLAND_SERVER_REQ_VERSION], [wayland_server_req_version])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
# Save this value here, since automake will set cflags later and we
# want to know if the user specified custom cflags or not.
cflags_set=${CFLAGS+set}
build: Enable subdir-objects Depend on a more recent version of automake, and use the forward-compatible subdir-objects option.
2015-09-03 04:03:39 -04:00
AM_INIT_AUTOMAKE([1.14 foreign -Wno-portability no-define no-dist-gzip dist-xz tar-ustar subdir-objects])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AM_SILENT_RULES([yes])
configure: Force #undef of 'near' and 'far' on Windows This adds an extra header that gets included from config.h where we can add configuration defines. This is used to #undef 'near' and 'far' when building for Windows so that we don't have to avoid using them as variable names in the Cogl code.
2011-06-13 08:09:47 -04:00
AH_BOTTOM([#include "config-custom.h"])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
build: Move the compiler checks and libtool initialization up It seems logical to first look for the compiler and then run the rest of configure script (which will use the compiler with small snippets). Same goes for the libtool initializaton, you might as well do it not too far from the automake one. This also happens to be preparatory work to compile cogl with an in-tree copy of some glib files as the glib's configure script needs those checks early. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit ba452ea4a48e48324ee7382b7ccb9065c255f55a)
2012-09-15 09:56:03 -04:00
dnl ================================================================
dnl Compiler stuff.
dnl ================================================================
AC_PROG_CC
AC_PROG_CPP
build: Allow to build cogl without an external glib dependency This commit pushes --disable-glib to the extreme of embedding the par of glib cogl depends on in tree to be able to generate a DSO that does not depend on an external glib. To do so, it: - keeps a lot of glib's configure.ac in as-glibconfig.m4 - pulls the code cogl depends on and the necessary dependencies Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-09-16 21:20:10 -04:00
AC_PROG_CXX
build: Move the compiler checks and libtool initialization up It seems logical to first look for the compiler and then run the rest of configure script (which will use the compiler with small snippets). Same goes for the libtool initializaton, you might as well do it not too far from the automake one. This also happens to be preparatory work to compile cogl with an in-tree copy of some glib files as the glib's configure script needs those checks early. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit ba452ea4a48e48324ee7382b7ccb9065c255f55a)
2012-09-15 09:56:03 -04:00
AM_PROG_CC_C_O
AC_ISC_POSIX
AC_C_CONST
dnl ============================================================
dnl Compiler features
dnl ============================================================
AC_MSG_CHECKING([for _Static_assert])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([_Static_assert (1, "");],
[(void) 0])],
cogl: Make _Static_assert non-optional
2018-05-03 14:16:35 -04:00
[AC_MSG_RESULT([yes])],
[AC_MSG_ERROR([Missing _Static_assert])])
build: Move the compiler checks and libtool initialization up It seems logical to first look for the compiler and then run the rest of configure script (which will use the compiler with small snippets). Same goes for the libtool initializaton, you might as well do it not too far from the automake one. This also happens to be preparatory work to compile cogl with an in-tree copy of some glib files as the glib's configure script needs those checks early. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit ba452ea4a48e48324ee7382b7ccb9065c255f55a)
2012-09-15 09:56:03 -04:00
dnl ================================================================
dnl Libtool stuff.
dnl ================================================================
dnl AC_PROG_LIBTOOL
dnl LIBTOOL="$LIBTOOL --preserve-dup-deps"
LT_PREREQ([2.2.6])
LT_INIT([disable-static])
build: Create the libtool file early as it's used by AS_GLIBCONFIG glib's configure.ac uses libtool to determine the extension of shared libraries. So let's generate the libtool file early in configure. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit ae457e0e2463bcec4f5891778e8ada9924f91be7)
2012-09-19 08:50:04 -04:00
dnl when using libtool 2.x create libtool early, because it's used in the
dnl internal glib configure (as-glibconfig.m4)
m4_ifdef([LT_OUTPUT], [LT_OUTPUT])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
build: Use LT_LIB_M to find the math library in a portable way https://bugzilla.gnome.org/show_bug.cgi?id=697330 Reviewed-by: Robert Bragg <robert@linux.intel.com> Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit a7b4930e14add7d955c22f396178b71083dfb52f) Conflicts: cogl/Makefile.am
2013-04-05 07:04:08 -04:00
dnl ================================================================
dnl Find an appropriate libm, for sin() etc.
dnl ================================================================
LT_LIB_M
AC_SUBST(LIBM)
cogl/configure.ac: check when building for win32 This adds a check for when building on win32 so we can skip pkg-config checks for opengl and can add appropriate flags to COGL_EXTRA_{LD,C}FLAGS.
2011-04-19 12:45:26 -04:00
dnl ================================================================
dnl See what platform we are building for
dnl ================================================================
AC_CANONICAL_HOST
Install conformance tests Install the conformance tests, and metadata to run them with gnome-desktop-testing-runner. https://bugzilla.gnome.org/show_bug.cgi?id=702942 Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 53f3eb421239982b69569ad03ccbfa4b4f601cf3)
2013-06-23 23:33:05 -04:00
dnl ============================================================
dnl Installed tests
dnl ============================================================
AC_ARG_ENABLE(installed_tests,
AS_HELP_STRING([--enable-installed-tests],
[Install test programs (default: no)]),,
[enable_installed_tests=no])
AM_CONDITIONAL(ENABLE_INSTALLED_TESTS, test x$enable_installed_tests = xyes)
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ============================================================
dnl Enable debugging
dnl ============================================================
build: Do not define "default" in m4 The "default" m4 conflicts with one of libtool's internal symbols, one that is used to determine whether the -fPIC argument should be used; this breaks compilation onf 64bit platforms. https://bugzilla.gnome.org/show_bug.cgi?id=653615 Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2011-06-29 05:12:47 -04:00
m4_define([debug_default], [m4_if(cogl_release_status, [git], [yes], [no])])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AC_ARG_ENABLE(
[debug],
build: Do not define "default" in m4 The "default" m4 conflicts with one of libtool's internal symbols, one that is used to determine whether the -fPIC argument should be used; this breaks compilation onf 64bit platforms. https://bugzilla.gnome.org/show_bug.cgi?id=653615 Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2011-06-29 05:12:47 -04:00
[AC_HELP_STRING([--enable-debug=@<:@no/yes@:>@], [Control Cogl debugging level @<:@default=]debug_default[@:>@])],
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
[],
build: Do not define "default" in m4 The "default" m4 conflicts with one of libtool's internal symbols, one that is used to determine whether the -fPIC argument should be used; this breaks compilation onf 64bit platforms. https://bugzilla.gnome.org/show_bug.cgi?id=653615 Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2011-06-29 05:12:47 -04:00
enable_debug=debug_default
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
)
AS_CASE(
[$enable_debug],
[yes],
[
test "$cflags_set" = set || CFLAGS="$CFLAGS -g -O0"
Fix disabling debugging When --disable-debug is passed to the configure script it was actually still defining COGL_ENABLE_DEBUG so very little would end up being disabled. If COGL_ENABLE_DEBUG actually got defined it would also fail to compile because _cogl_debug_instances and COGL_DEBUG_N_LONGS from cogl-debug.h were only defined if debugging is enabled but they are used regardless. This patch also makes it so that the _COGL_RETURN_IF_FAIL family of macros that are used when glib support is disabled are now disabled if debugging is disabled. When the glib macros are used they are already disabled because we additionally define G_DISABLE_CHECKS. 'COGL_HANDLE_DEBUG' has been removed from the list of defines passed when debugging is enabled because CoglHandle has already been removed and it is not used anywhere in the code. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 9811a0101c9cbb4ab95c55a2b41fd10ff4c77d9f)
2012-05-17 09:51:43 -04:00
COGL_EXTRA_CFLAGS="$COGL_EXTRA_CFLAGS -DCOGL_GL_DEBUG -DCOGL_OBJECT_DEBUG -DCOGL_ENABLE_DEBUG"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
],
[no],
[
Fix disabling debugging When --disable-debug is passed to the configure script it was actually still defining COGL_ENABLE_DEBUG so very little would end up being disabled. If COGL_ENABLE_DEBUG actually got defined it would also fail to compile because _cogl_debug_instances and COGL_DEBUG_N_LONGS from cogl-debug.h were only defined if debugging is enabled but they are used regardless. This patch also makes it so that the _COGL_RETURN_IF_FAIL family of macros that are used when glib support is disabled are now disabled if debugging is disabled. When the glib macros are used they are already disabled because we additionally define G_DISABLE_CHECKS. 'COGL_HANDLE_DEBUG' has been removed from the list of defines passed when debugging is enabled because CoglHandle has already been removed and it is not used anywhere in the code. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 9811a0101c9cbb4ab95c55a2b41fd10ff4c77d9f)
2012-05-17 09:51:43 -04:00
COGL_EXTRA_CFLAGS="$COGL_EXTRA_CFLAGS -DG_DISABLE_CHECKS -DG_DISABLE_CAST_CHECKS"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
],
[AC_MSG_ERROR([Unknown argument for --enable-debug])]
)
AC_SUBST(COGL_DEBUG_CFLAGS)
tests: Adds our first white-box unit test This adds a white-box unit test that verifies that GL_BLEND is disabled when drawing an opaque rectangle, enabled when drawing a transparent rectangle and then disabled again when drawing a transparent rectangle but with a blend string that effectively disables blending. This shares the test utilities and launcher infrastructure we are using for conformance tests so we get consistent reporting and so unit tests will be run against a range of different drivers. This adds a --enable-unit-tests configure option which is enabled by default but if disabled will make all UNIT_TESTS() into static inline functions that we should expect the compiler to discard since they won't be referenced by anything. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 9047cce06bbf9051ec77e622be2fdbb96ed767a8)
2013-05-30 08:22:22 -04:00
AC_ARG_ENABLE(
[unit-tests],
[AC_HELP_STRING([--enable-unit-tests=@<:@no/yes@:>@], [Build Cogl unit tests @<:@default=yes@:>@])],
[],
enable_unit_tests=yes
)
AS_IF([test "x$enable_unit_tests" = "xyes"],
[
AC_DEFINE([ENABLE_UNIT_TESTS], [1], [Whether to enable building unit tests])
]
)
AM_CONDITIONAL(UNIT_TESTS, test "x$enable_unit_tests" = "xyes")
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
configure.ac: move the --enable-cairo check This moves the --enable-cairo check because it was put in the middle of the logic that handles the --enable-debug option. This moves the --enable-cairo check down after the --enable-debug logic and adds a comment header to delimit the option like we have for other options.
2011-05-27 08:59:29 -04:00
dnl ============================================================
dnl Enable cairo usage for debugging
dnl (debugging code can use cairo to dump the atlas)
dnl ============================================================
cogl: Unconditionally depend on cairo
2018-05-18 10:24:45 -04:00
COGL_PKG_REQUIRES="$COGL_PKG_REQUIRES cairo >= cairo_req_version"
configure.ac: move the --enable-cairo check This moves the --enable-cairo check because it was put in the middle of the logic that handles the --enable-debug option. This moves the --enable-cairo check down after the --enable-debug logic and adds a comment header to delimit the option like we have for other options.
2011-05-27 08:59:29 -04:00
profile: Adds a --enable-profile option This adds a --enable-profile option which enables uprof based profiling. It was also necessary to fixup a CLUTTER_ENABLE_PROFILING #ifdef in cogl-context.c to renamed COGL_ENABLE_PROFILING instead. By default Cogl doesn't output uprof reports directly, instead it assumes a higher level toolkit will output a report. If you want a report from Cogl you can export COGL_PROFILE_OUTPUT_REPORT=1 before running your app. The latest version of uprof can be fetched from: git://github.com/rib/UProf.git
2011-06-13 05:30:49 -04:00
dnl ============================================================
dnl Enable profiling
dnl ============================================================
AC_ARG_ENABLE(profile,
build: Fix the help string for --enable-profile --enable-uprof has been renamed to --enable-profile, make sure the help string is updated accordingly. Signed-off-by: Robert Bragg <robert@linux.intel.com>
2011-07-10 20:13:09 -04:00
[AC_HELP_STRING([--enable-profile=@<:@no/yes@:>@],
build: Correctly quote the help message for --enable-profile It did not show up in ./configure --help because of that. Signed-off-by: Robert Bragg <robert@linux.intel.com>
2011-07-10 20:11:22 -04:00
[Turn on uprof profiling support. yes; All UProf profiling probe points are compiled in and may be runtime enabled. no; No profiling support will built into cogl. @<:@default=no@:>@])],
profile: Adds a --enable-profile option This adds a --enable-profile option which enables uprof based profiling. It was also necessary to fixup a CLUTTER_ENABLE_PROFILING #ifdef in cogl-context.c to renamed COGL_ENABLE_PROFILING instead. By default Cogl doesn't output uprof reports directly, instead it assumes a higher level toolkit will output a report. If you want a report from Cogl you can export COGL_PROFILE_OUTPUT_REPORT=1 before running your app. The latest version of uprof can be fetched from: git://github.com/rib/UProf.git
2011-06-13 05:30:49 -04:00
[],
[enable_profile=no])
AS_IF([test "x$enable_profile" = "xyes"],
[
AS_IF([test "x$GCC" = "xyes"],
[
COGL_PKG_REQUIRES="$COGL_PKG_REQUIRES uprof-0.3"
COGL_EXTRA_CFLAGS="$COGL_EXTRA_CFLAGS -DCOGL_ENABLE_PROFILE"
AS_IF([test "x$enable_debug" = "xyes"], [COGL_EXTRA_CFLAGS="$COGL_EXTRA_CFLAGS -DUPROF_DEBUG"])
],
[
AC_MSG_ERROR([--enable-profile is currently only supported if using GCC])
])
])
AM_CONDITIONAL(PROFILE, test "x$enable_profile" != "xno")
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ============================================================
dnl Enable strict compiler flags
dnl ============================================================
# use strict compiler flags only when building from git; the rules for
# distcheck will take care of turning this on when making a release
build: Do not define "default" in m4 The "default" m4 conflicts with one of libtool's internal symbols, one that is used to determine whether the -fPIC argument should be used; this breaks compilation onf 64bit platforms. https://bugzilla.gnome.org/show_bug.cgi?id=653615 Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2011-06-29 05:12:47 -04:00
m4_define([maintainer_default], [m4_if(cogl_release_status, [git], [yes], [no])])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AC_ARG_ENABLE(
[maintainer-flags],
build: Do not define "default" in m4 The "default" m4 conflicts with one of libtool's internal symbols, one that is used to determine whether the -fPIC argument should be used; this breaks compilation onf 64bit platforms. https://bugzilla.gnome.org/show_bug.cgi?id=653615 Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2011-06-29 05:12:47 -04:00
[AC_HELP_STRING([--enable-maintainer-flags=@<:@no/yes/error@:>@], [Use strict compiler flags @<:@default=]maintainer_default[@:>@])],
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
[],
build: Do not define "default" in m4 The "default" m4 conflicts with one of libtool's internal symbols, one that is used to determine whether the -fPIC argument should be used; this breaks compilation onf 64bit platforms. https://bugzilla.gnome.org/show_bug.cgi?id=653615 Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com> Signed-off-by: Neil Roberts <neil@linux.intel.com>
2011-06-29 05:12:47 -04:00
enable_maintainer_flags=maintainer_default
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
)
build: Drop -Werror for cast-align warnings It seems we really suck at that, or clang is really strict. https://bugzilla.gnome.org/show_bug.cgi?id=750725
2015-06-10 12:51:03 -04:00
MAINTAINER_COMPILER_FLAGS="-Wall -Wcast-align -Wformat -Wformat-security
build: Use -Werror for some compiler warnings We care especially about the violations of C89, for portability on some compilers.
2015-06-10 10:32:18 -04:00
-Werror=uninitialized -Werror=no-strict-aliasing
-Werror=empty-body -Werror=init-self -Werror=undef
-Werror=declaration-after-statement -Werror=vla
build: Add -Werror=maybe-uninitialized Should help us catch more edge cases.
2015-09-03 03:59:52 -04:00
-Werror=pointer-arith -Werror=missing-declarations
-Werror=maybe-uninitialized"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AS_CASE(
[$enable_maintainer_flags],
[yes],
[
AS_COMPILER_FLAGS([MAINTAINER_CFLAGS], [$MAINTAINER_COMPILER_FLAGS])
],
[no],
[
],
[error],
[
MAINTAINER_COMPILER_FLAGS="$MAINTAINER_COMPILER_FLAGS -Werror"
AS_COMPILER_FLAGS([MAINTAINER_CFLAGS], [$MAINTAINER_COMPILER_FLAGS])
],
[*],
[AC_MSG_ERROR([Invalid option for --enable-maintainer-flags])]
)
# strip leading spaces
build: Don't use bash string substitution in configure.ac Use the shell-neutral version. https://bugzilla.gnome.org/show_bug.cgi?id=651256
2011-06-01 11:44:57 -04:00
COGL_EXTRA_CFLAGS="$COGL_EXTRA_CFLAGS ${MAINTAINER_CFLAGS#* }"
cogl: Fix distcheck
2016-04-27 14:37:18 -04:00
COGL_EXTRA_CFLAGS="$COGL_EXTRA_CFLAGS -Wno-error=sign-compare"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
Add an option to avoid defining G_DISABLE_DEPRECATED G_DISABLE_DEPRECATED is only intended for developers of Cogl and it sometimes breaks the build for people just trying to build a release. This patch adds an option to enable deprecated Glib features. By default it is enabled for non-git versions of Cogl. The patch is based on similar code in Clutter except it adds the flags to COGL_EXTRA_CFLAGS instead of having a separate variable. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-27 05:27:19 -04:00
dnl ============================================================
dnl Enable deprecation guards
dnl ============================================================
# disable deprecated options from Glib only when building from git;
# the rules for distcheck will take care of turning this on when
# making a release
m4_define([deprecated_default],
[m4_if(cogl_release_status, [git], [no], [yes])])
AC_ARG_ENABLE([deprecated],
[AS_HELP_STRING([--enable-deprecated=@<:@no/yes@:>@],
[Whether deprecated symbols should be disabled when compiling Cogl @<:@default=]deprecated_default[@:>@])],
[],
[enable_deprecated=deprecated_default])
AS_CASE([$enable_deprecated],
[no],
[
DEPRECATED_CFLAGS="-DG_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES"
],
[yes],
[
DEPRECATED_CFLAGS=""
],
[AC_MSG_ERROR([Unknown argument for --enable-deprecated])]
)
# strip leading spaces
COGL_EXTRA_CFLAGS="$COGL_EXTRA_CFLAGS ${DEPRECATED_CFLAGS#* }"
configure: Don't allow --enable-gdk-pixbuf with --disable-glib The GDK pixbuf support requires being able to propagate errors from GDKPixbuf as GErrors. This won't work if we are using the builtin version of GLib because any attempt to call g_error_free from within Cogl will use the internal version which will free the error using the wrong slice allocator. It probably doesn't make much sense to build without glib but with gdk-pixbuf so there's not much point in trying to work around this situation. Previously if you specified --enable-gdk-pixbuf but gdk-pixbuf was not available it would silently disable it. This pach also fixes it so that it will report an error in that case. If --enable-gdk-pixbuf is not specified it will now default to enabling it only if both glib is enabled and gdk-pixbuf is available. This patch looks slightly longer than it ought to be because it moves the check for glib up to above the descisions about the image backend. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8b1eabdc08da89a57792f9eb666e893a6cbb4e26)
2012-11-22 12:07:14 -05:00
dnl ================================================================
dnl Check for dependency packages.
dnl ================================================================
disable standalone builds and drop private glib copy
2016-04-11 11:52:46 -04:00
AM_PATH_GLIB_2_0([glib_req_version],
[],
[AC_MSG_ERROR([glib-2.0 is required])],
[gobject gthread gmodule-no-export])
configure: Don't allow --enable-gdk-pixbuf with --disable-glib The GDK pixbuf support requires being able to propagate errors from GDKPixbuf as GErrors. This won't work if we are using the builtin version of GLib because any attempt to call g_error_free from within Cogl will use the internal version which will free the error using the wrong slice allocator. It probably doesn't make much sense to build without glib but with gdk-pixbuf so there's not much point in trying to work around this situation. Previously if you specified --enable-gdk-pixbuf but gdk-pixbuf was not available it would silently disable it. This pach also fixes it so that it will report an error in that case. If --enable-gdk-pixbuf is not specified it will now default to enabling it only if both glib is enabled and gdk-pixbuf is available. This patch looks slightly longer than it ought to be because it moves the check for glib up to above the descisions about the image backend. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8b1eabdc08da89a57792f9eb666e893a6cbb4e26)
2012-11-22 12:07:14 -05:00
disable standalone builds and drop private glib copy
2016-04-11 11:52:46 -04:00
COGL_PKG_REQUIRES="$COGL_PKG_REQUIRES gobject-2.0 gmodule-no-export-2.0"
configure: Don't allow --enable-gdk-pixbuf with --disable-glib The GDK pixbuf support requires being able to propagate errors from GDKPixbuf as GErrors. This won't work if we are using the builtin version of GLib because any attempt to call g_error_free from within Cogl will use the internal version which will free the error using the wrong slice allocator. It probably doesn't make much sense to build without glib but with gdk-pixbuf so there's not much point in trying to work around this situation. Previously if you specified --enable-gdk-pixbuf but gdk-pixbuf was not available it would silently disable it. This pach also fixes it so that it will report an error in that case. If --enable-gdk-pixbuf is not specified it will now default to enabling it only if both glib is enabled and gdk-pixbuf is available. This patch looks slightly longer than it ought to be because it moves the check for glib up to above the descisions about the image backend. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8b1eabdc08da89a57792f9eb666e893a6cbb4e26)
2012-11-22 12:07:14 -05:00
cogl: Always build CoglPango support
2018-05-03 14:51:04 -04:00
COGL_PANGO_PKG_REQUIRES="$COGL_PANGO_PKG_REQUIRES pangocairo >= pangocairo_req_version"
configure: Don't allow --enable-gdk-pixbuf with --disable-glib The GDK pixbuf support requires being able to propagate errors from GDKPixbuf as GErrors. This won't work if we are using the builtin version of GLib because any attempt to call g_error_free from within Cogl will use the internal version which will free the error using the wrong slice allocator. It probably doesn't make much sense to build without glib but with gdk-pixbuf so there's not much point in trying to work around this situation. Previously if you specified --enable-gdk-pixbuf but gdk-pixbuf was not available it would silently disable it. This pach also fixes it so that it will report an error in that case. If --enable-gdk-pixbuf is not specified it will now default to enabling it only if both glib is enabled and gdk-pixbuf is available. This patch looks slightly longer than it ought to be because it moves the check for glib up to above the descisions about the image backend. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8b1eabdc08da89a57792f9eb666e893a6cbb4e26)
2012-11-22 12:07:14 -05:00
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ============================================================
dnl Choose image loading backend
dnl ============================================================
disable standalone builds and drop private glib copy
2016-04-11 11:52:46 -04:00
COGL_PKG_REQUIRES="$COGL_PKG_REQUIRES gdk-pixbuf-2.0 >= gdk_pixbuf_req_version"
COGL_IMAGE_BACKEND="gdk-pixbuf"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ============================================================
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
dnl Determine which drivers and window systems we can support
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ============================================================
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
dnl ========================================================
dnl Drivers first...
dnl ========================================================
EGL_CHECKED=no
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
enabled_drivers=""
tests: Improve thoroughness and reporting of make test This patch reworks our conformance testing framework because it seems that glib's gtesting framework isn't really well suited to our use case. For example we weren't able to test windows builds given the way we were using it and also for each test we'd like to repeat the test with several different environments so we can test important driver and feature combinations. This patch instead switches away to a simplified but custom approach for running our unit tests. We hope that having a more bespoke setup will enable us to easily extend it to focus on the details important to us. Notable changes with this new approach are: We can now run 'make test' for our mingw windows builds. We've got rid of all the test-*report* make rules and we're just left with 'make test' 'make test' now runs each test several times with different driver and feature combinations checking the result for each run. 'make test' will then output a concise table of all of the results. The combinations tested are: - OpenGL Fixed Function - OpenGL ARBfp - OpenGL GLSL - OpenGL No NPOT texture support - OpenGLES 2.0 - OpenGLES 2.0 No NPOT texture support Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-23 07:30:51 -05:00
HAVE_GLES2=0
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
AC_ARG_ENABLE(
[gles2],
[AC_HELP_STRING([--enable-gles2=@<:@no/yes@:>@], [Enable support for OpenGL-ES 2.0 @<:@default=no@:>@])],
[],
enable_gles2=no
)
AS_IF([test "x$enable_gles2" = "xyes"],
[
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
enabled_drivers="$enabled_drivers gles2"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
cogl_gl_headers="GLES2/gl2.h GLES2/gl2ext.h"
AC_DEFINE([HAVE_COGL_GLES2], 1, [Have GLES 2.0 for rendering])
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_GLES CLUTTER_COGL_HAS_GLES"
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_GLES2"
tests: Improve thoroughness and reporting of make test This patch reworks our conformance testing framework because it seems that glib's gtesting framework isn't really well suited to our use case. For example we weren't able to test windows builds given the way we were using it and also for each test we'd like to repeat the test with several different environments so we can test important driver and feature combinations. This patch instead switches away to a simplified but custom approach for running our unit tests. We hope that having a more bespoke setup will enable us to easily extend it to focus on the details important to us. Notable changes with this new approach are: We can now run 'make test' for our mingw windows builds. We've got rid of all the test-*report* make rules and we're just left with 'make test' 'make test' now runs each test several times with different driver and feature combinations checking the result for each run. 'make test' will then output a concise table of all of the results. The combinations tested are: - OpenGL Fixed Function - OpenGL ARBfp - OpenGL GLSL - OpenGL No NPOT texture support - OpenGLES 2.0 - OpenGLES 2.0 No NPOT texture support Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-23 07:30:51 -05:00
HAVE_GLES2=1
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
renderer: drop support for SDL
2016-01-12 16:35:51 -05:00
PKG_CHECK_EXISTS([glesv2],
[COGL_PKG_REQUIRES_GL="$COGL_PKG_REQUIRES_GL glesv2"
COGL_GLES2_LIBNAME="libGLESv2.so"
],
[
# We have to check the two headers independently as GLES2/gl2ext.h
# needs to include GLES2/gl2.h to have the GL types defined (eg.
# GLenum).
AC_CHECK_HEADER([GLES2/gl2.h],
[],
[AC_MSG_ERROR([Unable to locate GLES2/gl2.h])])
AC_CHECK_HEADER([GLES2/gl2ext.h],
[],
[AC_MSG_ERROR([Unable to locate GLES2/gl2ext.h])],
[#include <GLES2/gl2.h>])
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
renderer: drop support for SDL
2016-01-12 16:35:51 -05:00
COGL_GLES2_LIBNAME="libGLESv2.so"
])
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
])
tests: Improve thoroughness and reporting of make test This patch reworks our conformance testing framework because it seems that glib's gtesting framework isn't really well suited to our use case. For example we weren't able to test windows builds given the way we were using it and also for each test we'd like to repeat the test with several different environments so we can test important driver and feature combinations. This patch instead switches away to a simplified but custom approach for running our unit tests. We hope that having a more bespoke setup will enable us to easily extend it to focus on the details important to us. Notable changes with this new approach are: We can now run 'make test' for our mingw windows builds. We've got rid of all the test-*report* make rules and we're just left with 'make test' 'make test' now runs each test several times with different driver and feature combinations checking the result for each run. 'make test' will then output a concise table of all of the results. The combinations tested are: - OpenGL Fixed Function - OpenGL ARBfp - OpenGL GLSL - OpenGL No NPOT texture support - OpenGLES 2.0 - OpenGLES 2.0 No NPOT texture support Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-23 07:30:51 -05:00
HAVE_GL=0
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
AC_ARG_ENABLE(
[gl],
[AC_HELP_STRING([--enable-gl=@<:@no/yes@:>@], [Enable support for OpenGL @<:@default=yes@:>@])],
[],
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
[enable_gl=yes]
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
)
AS_IF([test "x$enable_gl" = "xyes"],
[
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
enabled_drivers="$enabled_drivers gl"
build: Only allow GLX when finding the x11 pc file You can refine earlier the ALLOW_GLX variable when enabling OpenGL builds: No x11.pc? no GLX!
2011-05-12 06:43:27 -04:00
PKG_CHECK_EXISTS([x11], [ALLOW_GLX=yes])
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
cogl_gl_headers="GL/gl.h"
quartz: drop support
2016-04-10 12:55:22 -04:00
PKG_CHECK_EXISTS([gl],
dnl We don't want to use COGL_PKG_REQUIRES here because we don't want to
dnl directly link against libGL
[COGL_PKG_REQUIRES_GL="$COGL_PKG_REQUIRES_GL gl"],
[AC_CHECK_LIB(GL, [glGetString],
,
[AC_MSG_ERROR([Unable to locate required GL library])])
])
COGL_GL_LIBNAME="libGL.so.1"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
AC_DEFINE([HAVE_COGL_GL], [1], [Have GL for rendering])
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_GL"
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS CLUTTER_COGL_HAS_GL"
tests: Improve thoroughness and reporting of make test This patch reworks our conformance testing framework because it seems that glib's gtesting framework isn't really well suited to our use case. For example we weren't able to test windows builds given the way we were using it and also for each test we'd like to repeat the test with several different environments so we can test important driver and feature combinations. This patch instead switches away to a simplified but custom approach for running our unit tests. We hope that having a more bespoke setup will enable us to easily extend it to focus on the details important to us. Notable changes with this new approach are: We can now run 'make test' for our mingw windows builds. We've got rid of all the test-*report* make rules and we're just left with 'make test' 'make test' now runs each test several times with different driver and feature combinations checking the result for each run. 'make test' will then output a concise table of all of the results. The combinations tested are: - OpenGL Fixed Function - OpenGL ARBfp - OpenGL GLSL - OpenGL No NPOT texture support - OpenGLES 2.0 - OpenGLES 2.0 No NPOT texture support Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-23 07:30:51 -05:00
HAVE_GL=1
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
])
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
AM_CONDITIONAL([COGL_DRIVER_GL_SUPPORTED], [test "x$enable_gl" = "xyes"])
AM_CONDITIONAL([COGL_DRIVER_GLES_SUPPORTED],
[test "x$enable_gles1" = "xyes" || test "x$enable_gles2" = "xyes"])
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
Make the default driver selectable at configure time When building COGL with multiple backends it can be useful to force a default driver to be selected. For example while for Debian we do want to build the GL renderer on ARM, GLESv2 is much more suitable as the default renderer on that platform. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8a43aa7167b56784f7b50c557391b990861d594f)
2012-06-20 03:47:41 -04:00
dnl Allow the GL library names and default driver to be overridden with configure options
configure: Add configure options to override the GL library name This adds 3 configure options to override the library name that gets dlopened for GL, GLES and GLESv2. This could be useful for distro maintainers who have an unusual name for the libraries (for example, on OpenBSD the GL library appears to be called libGL.so.4). This could at least be simpler than having to create a distro patch. The configure options would be used like this: ./configure --with-gl-libname=libGL.so \ --with-gles1-libname=libGLESv1.so \ --with-gles2-libname=libGLESv2.so https://bugzilla.gnome.org/show_bug.cgi?id=654593
2011-07-18 13:47:44 -04:00
AC_ARG_WITH([gl-libname],
[AS_HELP_STRING([--with-gl-libname],
override the name of the GL library to dlopen)],
[COGL_GL_LIBNAME="$withval"])
AC_ARG_WITH([gles2-libname],
[AS_HELP_STRING([--with-gles2-libname],
override the name of the GLESv2 library to dlopen)],
[COGL_GLES2_LIBNAME="$withval"])
Make the default driver selectable at configure time When building COGL with multiple backends it can be useful to force a default driver to be selected. For example while for Debian we do want to build the GL renderer on ARM, GLESv2 is much more suitable as the default renderer on that platform. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8a43aa7167b56784f7b50c557391b990861d594f)
2012-06-20 03:47:41 -04:00
AC_ARG_WITH([default-driver],
[AS_HELP_STRING([--with-default-driver],
specify a default cogl driver)],
[COGL_DEFAULT_DRIVER="${withval}"],
[COGL_DEFAULT_DRIVER="" ])
AM_CONDITIONAL(HAVE_COGL_DEFAULT_DRIVER,
[ test "x$COGL_DEFAULT_DRIVER" != "x" ])
configure: Add configure options to override the GL library name This adds 3 configure options to override the library name that gets dlopened for GL, GLES and GLESv2. This could be useful for distro maintainers who have an unusual name for the libraries (for example, on OpenBSD the GL library appears to be called libGL.so.4). This could at least be simpler than having to create a distro patch. The configure options would be used like this: ./configure --with-gl-libname=libGL.so \ --with-gles1-libname=libGLESv1.so \ --with-gles2-libname=libGLESv2.so https://bugzilla.gnome.org/show_bug.cgi?id=654593
2011-07-18 13:47:44 -04:00
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
AC_SUBST([COGL_GL_LIBNAME])
tests: Improve thoroughness and reporting of make test This patch reworks our conformance testing framework because it seems that glib's gtesting framework isn't really well suited to our use case. For example we weren't able to test windows builds given the way we were using it and also for each test we'd like to repeat the test with several different environments so we can test important driver and feature combinations. This patch instead switches away to a simplified but custom approach for running our unit tests. We hope that having a more bespoke setup will enable us to easily extend it to focus on the details important to us. Notable changes with this new approach are: We can now run 'make test' for our mingw windows builds. We've got rid of all the test-*report* make rules and we're just left with 'make test' 'make test' now runs each test several times with different driver and feature combinations checking the result for each run. 'make test' will then output a concise table of all of the results. The combinations tested are: - OpenGL Fixed Function - OpenGL ARBfp - OpenGL GLSL - OpenGL No NPOT texture support - OpenGLES 2.0 - OpenGLES 2.0 No NPOT texture support Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-23 07:30:51 -05:00
AC_SUBST([HAVE_GL])
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
AC_SUBST([COGL_GLES2_LIBNAME])
tests: Improve thoroughness and reporting of make test This patch reworks our conformance testing framework because it seems that glib's gtesting framework isn't really well suited to our use case. For example we weren't able to test windows builds given the way we were using it and also for each test we'd like to repeat the test with several different environments so we can test important driver and feature combinations. This patch instead switches away to a simplified but custom approach for running our unit tests. We hope that having a more bespoke setup will enable us to easily extend it to focus on the details important to us. Notable changes with this new approach are: We can now run 'make test' for our mingw windows builds. We've got rid of all the test-*report* make rules and we're just left with 'make test' 'make test' now runs each test several times with different driver and feature combinations checking the result for each run. 'make test' will then output a concise table of all of the results. The combinations tested are: - OpenGL Fixed Function - OpenGL ARBfp - OpenGL GLSL - OpenGL No NPOT texture support - OpenGLES 2.0 - OpenGLES 2.0 No NPOT texture support Reviewed-by: Neil Roberts <neil@linux.intel.com>
2012-02-23 07:30:51 -05:00
AC_SUBST([HAVE_GLES2])
Make the default driver selectable at configure time When building COGL with multiple backends it can be useful to force a default driver to be selected. For example while for Debian we do want to build the GL renderer on ARM, GLESv2 is much more suitable as the default renderer on that platform. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8a43aa7167b56784f7b50c557391b990861d594f)
2012-06-20 03:47:41 -04:00
AC_SUBST([COGL_DEFAULT_DRIVER])
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
Adds libcogl-gles2 frontend GLES2 api This adds a library that can be used instead of libGLESv2.so to provide symbols for the GLES 2.0 api. This can be used for convenience when using the cogl_gles2_context_ api since you don't need to manually go through a CoglGLES2Vtable when calling the gles2 api so it should be easier to port existing gles2 code to integrate with Cogl. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 80d7599a2acefca7d01d8d7de9df524278ef72c5)
2012-03-23 21:41:48 -04:00
AC_ARG_ENABLE(
[cogl-gles2],
[AC_HELP_STRING([--enable-cogl-gles2=@<:@no/yes@:>@],
[Enable libcogl-gles2 frontend api for OpenGL-ES 2.0 @<:@default=auto@:>@])],
[],
[
AS_IF([test "x$HAVE_GLES2" = "x1"],
[enable_cogl_gles2=yes],
[enable_cogl_gles2=no])
]
)
AS_IF([test "x$enable_cogl_gles2" = "xyes"],
[
AS_IF([test "x$HAVE_GLES2" != "x1"],
[
AC_MSG_ERROR([libcogl-gles2 is currently only supported on systems with a native GLES 2.0 library])
])
])
AM_CONDITIONAL([BUILD_COGL_GLES2], [test "x$enable_cogl_gles2" = "xyes"])
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
dnl ========================================================
dnl Check window system integration libraries...
dnl ========================================================
AC_ARG_ENABLE(
[glx],
[AC_HELP_STRING([--enable-glx=@<:@no/yes@:>@], [Enable support GLX @<:@default=auto@:>@])],
[],
[AS_IF([test "x$ALLOW_GLX" = "xyes"], [enable_glx=yes], [enable_glx=no])]
)
AS_IF([test "x$enable_glx" = "xyes"],
[
AS_IF([test "x$ALLOW_GLX" != "xyes"],
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
[AC_MSG_ERROR([GLX not supported with this configuration])])
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
NEED_XLIB=yes
SUPPORT_GLX=yes
GL_WINSYS_APIS="$GL_WINSYS_APIS glx"
configure: Expose COGL_HAS_GLX_SUPPORT publicly Instead of only exposing COGL_HAS_GLX_SUPPORT internally in config.h we now expose it though the public cogl-defines.h header. Signed-off-by: Neil Roberts <neil@linux.intel.com>
2011-07-13 06:43:49 -04:00
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_GLX_SUPPORT"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
])
AM_CONDITIONAL(SUPPORT_GLX, [test "x$SUPPORT_GLX" = "xyes"])
EGL_PLATFORM_COUNT=0
Adds _cogl_wayland_texture_2d_new_from_buffer API This adds internal API to be able to wrap a wayland buffer as a CoglTexture2D. There is a --enable-wayland-egl-server option to decide if Cogl should support this feature and potentially any EGL based winsys could support this through the EGL_KHR_image_base and EGL_WL_bind_display extensions.
2011-05-24 20:37:56 -04:00
AC_ARG_ENABLE(
[wayland-egl-server],
[AC_HELP_STRING([--enable-wayland-egl-server=@<:@no/yes@:>@], [Enable server side wayland support @<:@default=no@:>@])],
[],
Fix the merged build https://bugzilla.gnome.org/show_bug.cgi?id=760439
2016-04-08 13:58:20 -04:00
enable_wayland_egl_server=yes
Adds _cogl_wayland_texture_2d_new_from_buffer API This adds internal API to be able to wrap a wayland buffer as a CoglTexture2D. There is a --enable-wayland-egl-server option to decide if Cogl should support this feature and potentially any EGL based winsys could support this through the EGL_KHR_image_base and EGL_WL_bind_display extensions.
2011-05-24 20:37:56 -04:00
)
test(1) uses '=' to test if strings are identical https://bugzilla.gnome.org/show_bug.cgi?id=682340 Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 5cd15e7781466307a27c31e6e3f1e7f5ade5cfee)
2012-08-21 06:10:23 -04:00
AS_IF([test "x$enable_wayland_egl_server" = "xyes"],
Adds _cogl_wayland_texture_2d_new_from_buffer API This adds internal API to be able to wrap a wayland buffer as a CoglTexture2D. There is a --enable-wayland-egl-server option to decide if Cogl should support this feature and potentially any EGL based winsys could support this through the EGL_KHR_image_base and EGL_WL_bind_display extensions.
2011-05-24 20:37:56 -04:00
[
NEED_EGL=yes
build: only build cogland with wayland-server 0.85 This ensures we only try to build cogland if we have wayland-server 0.85.x since the api is incompatible with later versions.
2013-01-04 12:21:22 -05:00
configure: Add a minimum required version for the wayland package Previously Cogl would accept any version of Wayland when building the Wayland backend. Seeing as there is now a stable API we might as well specify that we require at least version 1.0.0. This is now also mentioned in the README. This patch also changes it to use PKG_CHECK_MODULES instead of PKG_CHECK_EXISTS because it does need to abort if it fails and it shouldn't be checking it silently. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit d899955b714e5ed50c6c89b9fde4b341bcf80558)
2013-03-20 12:36:58 -04:00
PKG_CHECK_MODULES(WAYLAND_SERVER,
Set the minimum required wayland-server version to 1.1.90 Since the Wayland server support has been updated to use wl_shm_buffer we need the latest git version of Wayland to build. Previously the configure.ac file only had one define for the minimum version of both the client-side and server-side support but as they are now different this patch splits them out. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 75d62292fc268164f8a085225033abe17e59ba1c)
2013-07-01 09:06:16 -04:00
[wayland-server >= wayland_server_req_version])
COGL_PKG_REQUIRES="$COGL_PKG_REQUIRES wayland-server >= wayland_server_req_version"
build: only build cogland with wayland-server 0.85 This ensures we only try to build cogland if we have wayland-server 0.85.x since the api is incompatible with later versions.
2013-01-04 12:21:22 -05:00
Adds _cogl_wayland_texture_2d_new_from_buffer API This adds internal API to be able to wrap a wayland buffer as a CoglTexture2D. There is a --enable-wayland-egl-server option to decide if Cogl should support this feature and potentially any EGL based winsys could support this through the EGL_KHR_image_base and EGL_WL_bind_display extensions.
2011-05-24 20:37:56 -04:00
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_WAYLAND_EGL_SERVER_SUPPORT"
])
AM_CONDITIONAL(SUPPORT_WAYLAND_EGL_SERVER,
[test "x$enable_wayland_egl_server" = "xyes"])
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
dnl This should go last, since it's the default fallback and we need
dnl to check the value of $EGL_PLATFORM_COUNT here.
AC_ARG_ENABLE(
[xlib-egl-platform],
[AC_HELP_STRING([--enable-xlib-egl-platform=@<:@no/yes@:>@], [Enable support for the Xlib egl platform @<:@default=auto@:>@])],
[],
Fix the merged build https://bugzilla.gnome.org/show_bug.cgi?id=760439
2016-04-08 13:58:20 -04:00
enable_xlib_egl_platform=yes
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
)
AS_IF([test "x$enable_xlib_egl_platform" = "xyes"],
[
EGL_PLATFORM_COUNT=$((EGL_PLATFORM_COUNT+1))
NEED_EGL=yes
NEED_XLIB=yes
EGL_PLATFORMS="$EGL_PLATFORMS xlib"
Rename the EGL_X11 winsys to EGL_XLIB Eventually we might want to have an XCB-based EGL winsys. We already have xlib-specific API in CoglRenderer (eg, to set a foreign display) so the application needs to be able to specifically select between XCB and XLIB. This also removes the POWERVR part while renaming COGL_HAS_EGL_PLATFORM_POWERVR_X11_SUPPORT to COGL_HAS_EGL_PLATFORM_XLIB_SUPPORT because the winsys is equally applicable to Mesa. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-12-13 11:23:25 -05:00
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_EGL_PLATFORM_XLIB_SUPPORT"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
])
Rename the EGL_X11 winsys to EGL_XLIB Eventually we might want to have an XCB-based EGL winsys. We already have xlib-specific API in CoglRenderer (eg, to set a foreign display) so the application needs to be able to specifically select between XCB and XLIB. This also removes the POWERVR part while renaming COGL_HAS_EGL_PLATFORM_POWERVR_X11_SUPPORT to COGL_HAS_EGL_PLATFORM_XLIB_SUPPORT because the winsys is equally applicable to Mesa. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-12-13 11:23:25 -05:00
AM_CONDITIONAL(SUPPORT_EGL_PLATFORM_XLIB,
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
[test "x$enable_xlib_egl_platform" = "xyes"])
AS_IF([test "x$NEED_EGL" = "xyes" && test "x$EGL_CHECKED" != "xyes"],
[
PKG_CHECK_EXISTS([egl],
[COGL_PKG_REQUIRES="$COGL_PKG_REQUIRES egl"],
[
AC_CHECK_HEADERS(
egl: Make sure to have egl.h included when testing for eglext.h AC_CHECK_HEADER(S) for eglext.h need include egl.h as it may not be done for you. The patch tries to integrate with the previous work to check if GLES/egl.h ir EGL/egl.h should be included for egl.h.
2011-07-22 10:13:44 -04:00
[EGL/egl.h],
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
[],
[AC_MSG_ERROR([Unable to locate required EGL headers])])
egl: Make sure to have egl.h included when testing for eglext.h AC_CHECK_HEADER(S) for eglext.h need include egl.h as it may not be done for you. The patch tries to integrate with the previous work to check if GLES/egl.h ir EGL/egl.h should be included for egl.h.
2011-07-22 10:13:44 -04:00
AC_CHECK_HEADERS(
[EGL/eglext.h],
[],
[AC_MSG_ERROR([Unable to locate required EGL headers])],
[#include <EGL/egl.h>])
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
AC_CHECK_LIB(EGL, [eglInitialize],
[COGL_EXTRA_LDFLAGS="$COGL_EXTRA_LDFLAGS -lEGL"],
[AC_MSG_ERROR([Unable to locate required EGL library])])
COGL_EXTRA_LDFLAGS="$COGL_EXTRA_LDFLAGS -lEGL"
]
)
egl: check or EGL/eglext.h While running configure we now check for EGL/eglext.h and if found we will substitute an inclusion in cogl-defines.h.
2011-05-24 16:33:22 -04:00
COGL_EGL_INCLUDES="#include <EGL/egl.h>
#include <EGL/eglext.h>"
AC_SUBST([COGL_EGL_INCLUDES])
])
build: Ensure EGL related variables are defined even when EGL_CHECKED=yes When checking for EGL earlier in the configure script (ie EGL_CHECKED is "yes"), we did not execute some EGL code. Let's split that code in two: - A first part that has a last change to check for EGL - A second one that defines variables and that should always been run in an EGL build
2011-05-12 10:51:01 -04:00
AS_IF([test "x$NEED_EGL" = "xyes"],
[
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
SUPPORT_EGL=yes
GL_WINSYS_APIS="$GL_WINSYS_APIS egl"
cogl/configure.ac: make COGL_HAS_xyz defines public Instead of using AC_DEFINE for the various COGL_HAS_PLATFORM defines this now adds them to the COGL_DEFINES_SYMBOLS variable which gets substituted into the public cogl-defines.h header.
2011-04-18 10:57:32 -04:00
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_EGL_SUPPORT"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
])
build: Ensure EGL related variables are defined even when EGL_CHECKED=yes When checking for EGL earlier in the configure script (ie EGL_CHECKED is "yes"), we did not execute some EGL code. Let's split that code in two: - A first part that has a last change to check for EGL - A second one that defines variables and that should always been run in an EGL build
2011-05-12 10:51:01 -04:00
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
AM_CONDITIONAL(SUPPORT_EGL, [test "x$SUPPORT_EGL" = "xyes"])
dnl ========================================================
dnl Check X11 dependencies if required
dnl ========================================================
AS_IF([test "x$NEED_XLIB" = "xyes"],
[
Add CoglOutput and track for the GLX backend The CoglOutput object represents one output such as a monitor or laptop panel, with information about attributes of the output such as the position of the output within the global coordinate space, and the refresh rate. We don't yet publically export the ability to get output information but we track it for the GLX backend, where we'll use it to track the refresh rate. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit d7ef9d8d71488d0e6874f1ffc6e48700d5c82a31)
2012-11-12 11:31:16 -05:00
X11_MODULES="x11 xext xfixes >= xfixes_req_version xdamage xcomposite >= xcomposite_req_version xrandr >= xrandr_req_version"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
PKG_CHECK_MODULES(DUMMY, [$X11_MODULES],
[COGL_PKG_REQUIRES="$COGL_PKG_REQUIRES $X11_MODULES"])
SUPPORT_X11=yes
SUPPORT_XLIB=yes
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_X11"
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_X11_SUPPORT"
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_XLIB"
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_XLIB_SUPPORT"
])
AM_CONDITIONAL(X11_TESTS, [test "x$SUPPORT_X11" = "xyes"])
AM_CONDITIONAL(SUPPORT_X11, [test "x$SUPPORT_X11" = "xyes"])
AM_CONDITIONAL(SUPPORT_XLIB, [test "x$SUPPORT_XLIB" = "xyes"])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ================================================================
dnl Documentation stuff.
dnl ================================================================
doc: Fix cross-referencing with glib and gdk-pixbuf The libraries prefixes where never set in the configure script and GDKPIXBUF_PREFIX had a typo. (cherry picked from commit 5d8c0e13ed0572f806fdff2bff1d5904ed3bf69b)
2012-12-31 18:24:26 -05:00
GLIB_PREFIX="`$PKG_CONFIG --variable=prefix glib-2.0`"
GDKPIXBUF_PREFIX="`$PKG_CONFIG --variable=prefix gdk-pixbuf-2.0`"
AC_SUBST(GLIB_PREFIX)
AC_SUBST(GDKPIXBUF_PREFIX)
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AC_SUBST(COGL_PKG_REQUIRES)
Adds initial Emscripten support to Cogl This enables basic Emscripten support in Cogl via the SDL winsys. Assuming you have setup an emscripten toolchain you can configure Cogl like this: emconfigure ./configure --enable-debug --enable-emscripten Building the examples will build .html files that can be loaded directly by a WebGL enabled browser. Note: at this point the emscripten support has just barely been smoke tested so it's expected that as we continue to build on this we will learn about more things we need to change in Cogl to full support this environment. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit a3bc2e7539391b074e697839dfae60b69c37cf10)
2013-04-27 21:42:24 -04:00
if test -n "$COGL_PKG_REQUIRES"; then
PKG_CHECK_MODULES(COGL_DEP, [$COGL_PKG_REQUIRES])
if test -n "$COGL_PKG_REQUIRES_GL"; then
PKG_CHECK_MODULES(COGL_DEP_GL, [$COGL_PKG_REQUIRES_GL])
dnl Strip out the GL libraries from the GL pkg-config files so we can
dnl dynamically load them instead
gl_libs=""
for x in $COGL_DEP_GL_LIBS; do
AS_CASE([$x],
[-lGL], [],
[-lGLESv2], [],
[-lGLESv1_CM], [],
[*], [gl_libs="$gl_libs $x"])
done
COGL_DEP_CFLAGS="$COGL_DEP_CFLAGS $COGL_DEP_CFLAGS_GL"
COGL_DEP_LIBS="$COGL_DEP_LIBS $gl_libs"
fi
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
fi
build: only have libcogl-pango depend on pango Only cogl-pango needs a dependency on pangocairo so we are now careful to separate the pangocairo pkg-config flags from the others so we can avoid having libcogl builds refer to them. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-02 09:14:06 -04:00
AC_SUBST(COGL_PANGO_PKG_REQUIRES)
configure.ac: ignore COGL_PANGO_DEPS if cogl-pango disabled This skips the pkg-config check for COGL_PANGO_DEPS if --disable-cogl-pango was explicitly passed to ./configure. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-12-19 11:01:37 -05:00
cogl: Always build CoglPango support
2018-05-03 14:51:04 -04:00
PKG_CHECK_MODULES(COGL_PANGO_DEP, [$COGL_PANGO_PKG_REQUIRES])
build: Allow to build cogl without an external glib dependency This commit pushes --disable-glib to the extreme of embedding the par of glib cogl depends on in tree to be able to generate a DSO that does not depend on an external glib. To do so, it: - keeps a lot of glib's configure.ac in as-glibconfig.m4 - pulls the code cogl depends on and the necessary dependencies Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-09-16 21:20:10 -04:00
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ================================================================
dnl Misc program dependencies.
dnl ================================================================
AC_PROG_INSTALL
dnl ================================================================
dnl GObject-Introspection check
dnl ================================================================
disable standalone builds and drop private glib copy
2016-04-11 11:52:46 -04:00
GOBJECT_INTROSPECTION_CHECK([gi_req_version])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ================================================================
dnl Checks for header files.
dnl ================================================================
AC_PATH_X
AC_HEADER_STDC
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
AC_CHECK_HEADERS(fcntl.h limits.h unistd.h)
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
dnl ================================================================
dnl Checks for library functions.
dnl ================================================================
configure.ac: Add the check for the ffs function When Cogl was sharing Clutter's configure script, it had a check for the ffs function of libc so that it can provide a fallback if it is not available. This fallback was missed in the split out so Cogl would end up always using the fallback.
2011-05-06 12:21:30 -04:00
dnl The 'ffs' function is part of C99 so it isn't always
dnl available. Cogl has a fallback if needed.
renderer: drop support for SDL
2016-01-12 16:35:51 -05:00
AC_CHECK_FUNCS([ffs])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
Add a wrapper for 'memmem' memmem is a GNU libc extension that works like strstr except that the size of the needle and the haystack are passed into the function instead of using null-terminated strings. This patch adds a wrapper function called 'cogl_util_memmem' so that we can use this function. There is a configure check and if the function is not available then a fallback implementation will be used. Otherwise cogl_util_memmem is just defined to memmem. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 1dd1b0a67f6238e13f7f9253fb03addada0541b7)
2012-08-07 06:45:29 -04:00
dnl 'memmem' is a GNU extension but we have a simple fallback
AC_CHECK_FUNCS([memmem])
Fix a warning about ‘sincos’ in examples/cogl-gles2-gears ‘sincos’ is a GNU extension. cogl-gles2-gears was using it without defining _GNU_SOURCE so it was generating some annoying warnings. This patch fixes it by making the example include config.h which will end up defining _GNU_SOURCE. In addition this patch adds a configure check for the function and provides a fallback if it's not available. https://bugzilla.gnome.org/show_bug.cgi?id=697330 Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit eb5c92952e1882c95cfd6debc69a2c9efff096b9)
2013-04-05 13:08:29 -04:00
dnl This is used in the cogl-gles2-gears example but it is a GNU extension
save_libs="$LIBS"
LIBS="$LIBS $LIBM"
AC_CHECK_FUNCS([sincos])
LIBS="$save_libs"
Add support for main loop integration This adds two new functions: void cogl_poll_get_info (CoglContext *context, CoglPollFD **poll_fds, int *n_poll_fds, gint64 *timeout); void cogl_poll_dispatch (CoglContext *context, const CoglPollFD *poll_fds, int n_poll_fds); The application is expected to call the first function whenever it is about to block to go idle, and the second function whenever it comes out of idle. This gives Cogl winsys's the ability poll file descriptors for events. For example when handing swap complete notifications, it can report that it needs to block on a file descriptor. The two functions are backed by winsys virtual functions. There are currently no implementations. The default handler for get_info just reports no file descriptors and an infinite timeout. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-12-16 12:49:28 -05:00
dnl ================================================================
dnl Platform values
dnl ================================================================
dnl These are values from system headers that we want to copy into the
dnl public Cogl headers without having to include the system header
Adds initial Emscripten support to Cogl This enables basic Emscripten support in Cogl via the SDL winsys. Assuming you have setup an emscripten toolchain you can configure Cogl like this: emconfigure ./configure --enable-debug --enable-emscripten Building the examples will build .html files that can be loaded directly by a WebGL enabled browser. Note: at this point the emscripten support has just barely been smoke tested so it's expected that as we continue to build on this we will learn about more things we need to change in Cogl to full support this environment. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit a3bc2e7539391b074e697839dfae60b69c37cf10)
2013-04-27 21:42:24 -04:00
have_poll_h=no
renderer: drop support for SDL
2016-01-12 16:35:51 -05:00
AC_CHECK_HEADER(poll.h,
[
AC_COMPUTE_INT(COGL_SYSDEF_POLLIN, POLLIN, [#include <poll.h>],
AC_MSG_ERROR([Unable to get value of POLLIN]))
AC_COMPUTE_INT(COGL_SYSDEF_POLLPRI, POLLPRI, [#include <poll.h>],
AC_MSG_ERROR([Unable to get value of POLLPRI]))
AC_COMPUTE_INT(COGL_SYSDEF_POLLOUT, POLLOUT, [#include <poll.h>],
AC_MSG_ERROR([Unable to get value of POLLOUT]))
AC_COMPUTE_INT(COGL_SYSDEF_POLLERR, POLLERR, [#include <poll.h>],
AC_MSG_ERROR([Unable to get value of POLLERR]))
AC_COMPUTE_INT(COGL_SYSDEF_POLLHUP, POLLHUP, [#include <poll.h>],
AC_MSG_ERROR([Unable to get value of POLLHUP]))
AC_COMPUTE_INT(COGL_SYSDEF_POLLNVAL, POLLNVAL, [#include <poll.h>],
AC_MSG_ERROR([Unable to get value of POLLNVAL]))
COGL_DEFINES_SYMBOLS="$COGL_DEFINES_SYMBOLS COGL_HAS_POLL_SUPPORT"
have_poll_h=yes
])
Adds initial Emscripten support to Cogl This enables basic Emscripten support in Cogl via the SDL winsys. Assuming you have setup an emscripten toolchain you can configure Cogl like this: emconfigure ./configure --enable-debug --enable-emscripten Building the examples will build .html files that can be loaded directly by a WebGL enabled browser. Note: at this point the emscripten support has just barely been smoke tested so it's expected that as we continue to build on this we will learn about more things we need to change in Cogl to full support this environment. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit a3bc2e7539391b074e697839dfae60b69c37cf10)
2013-04-27 21:42:24 -04:00
AS_IF([test "x$have_poll_h" = "xno"],
[
COGL_SYSDEF_POLLIN=1
COGL_SYSDEF_POLLPRI=2
COGL_SYSDEF_POLLOUT=4
COGL_SYSDEF_POLLERR=8
COGL_SYSDEF_POLLHUP=16
COGL_SYSDEF_POLLNVAL=32
])
Add support for main loop integration This adds two new functions: void cogl_poll_get_info (CoglContext *context, CoglPollFD **poll_fds, int *n_poll_fds, gint64 *timeout); void cogl_poll_dispatch (CoglContext *context, const CoglPollFD *poll_fds, int n_poll_fds); The application is expected to call the first function whenever it is about to block to go idle, and the second function whenever it comes out of idle. This gives Cogl winsys's the ability poll file descriptors for events. For example when handing swap complete notifications, it can report that it needs to block on a file descriptor. The two functions are backed by winsys virtual functions. There are currently no implementations. The default handler for get_info just reports no file descriptors and an infinite timeout. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-12-16 12:49:28 -05:00
COGL_DEFINES_EXTRA="$COGL_DEFINES_EXTRA
#define COGL_SYSDEF_POLLIN $COGL_SYSDEF_POLLIN
#define COGL_SYSDEF_POLLPRI $COGL_SYSDEF_POLLPRI
#define COGL_SYSDEF_POLLOUT $COGL_SYSDEF_POLLOUT
#define COGL_SYSDEF_POLLERR $COGL_SYSDEF_POLLERR
#define COGL_SYSDEF_POLLHUP $COGL_SYSDEF_POLLHUP
#define COGL_SYSDEF_POLLNVAL $COGL_SYSDEF_POLLNVAL
"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
dnl ================================================================
dnl What needs to be substituted in other files
dnl ================================================================
Add support for main loop integration This adds two new functions: void cogl_poll_get_info (CoglContext *context, CoglPollFD **poll_fds, int *n_poll_fds, gint64 *timeout); void cogl_poll_dispatch (CoglContext *context, const CoglPollFD *poll_fds, int n_poll_fds); The application is expected to call the first function whenever it is about to block to go idle, and the second function whenever it comes out of idle. This gives Cogl winsys's the ability poll file descriptors for events. For example when handing swap complete notifications, it can report that it needs to block on a file descriptor. The two functions are backed by winsys virtual functions. There are currently no implementations. The default handler for get_info just reports no file descriptors and an infinite timeout. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-12-16 12:49:28 -05:00
COGL_DEFINES="$COGL_DEFINES_EXTRA"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
for x in $COGL_DEFINES_SYMBOLS; do
COGL_DEFINES="$COGL_DEFINES
#define $x 1"
done;
AC_SUBST(COGL_DEFINES)
build: Exclude COGL_DEFINES and COGL_GL_HEADER_INCLUDES from Makefiles Some variables (notably multiline ones) are not really supposed to be substituted by automake. Let's take COGL_DEFINES for instance, you get: COGL_DEFINES = #define COGL_HAS_GLIB_SUPPORT #define COGL_HAS_GTYPE_SUPPORT #define COGL_HAS_GL #define CLUTTER_COGL_HAS_GL #define COGL_HAS_GLX_SUPPORT #define COGL_HAS_SDL ... This only works because the '#' character makes it look like a comment and COGL_DEFINES becomes an empty variable Automake allows to exclude variables from the list of substitutions, let's use it for those two. (cherry picked from commit e0a9d8d775c90c60b6e63b52771e896da3641a40)
2012-12-28 21:51:34 -05:00
AM_SUBST_NOTMAKE(COGL_DEFINES)
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
AS_IF([test "x$cogl_gl_headers" = "x"],
[AC_MSG_ERROR([Internal error: no GL header set])])
dnl cogl_gl_headers is a space separate list of headers to
dnl include. We'll now convert them to a single variable with a
dnl #include line for each header
COGL_GL_HEADER_INCLUDES=""
for x in $cogl_gl_headers; do
COGL_GL_HEADER_INCLUDES="$COGL_GL_HEADER_INCLUDES
#include <$x>"
done;
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AC_SUBST(COGL_GL_HEADER_INCLUDES)
build: Exclude COGL_DEFINES and COGL_GL_HEADER_INCLUDES from Makefiles Some variables (notably multiline ones) are not really supposed to be substituted by automake. Let's take COGL_DEFINES for instance, you get: COGL_DEFINES = #define COGL_HAS_GLIB_SUPPORT #define COGL_HAS_GTYPE_SUPPORT #define COGL_HAS_GL #define CLUTTER_COGL_HAS_GL #define COGL_HAS_GLX_SUPPORT #define COGL_HAS_SDL ... This only works because the '#' character makes it look like a comment and COGL_DEFINES becomes an empty variable Automake allows to exclude variables from the list of substitutions, let's use it for those two. (cherry picked from commit e0a9d8d775c90c60b6e63b52771e896da3641a40)
2012-12-28 21:51:34 -05:00
AM_SUBST_NOTMAKE(COGL_GL_HEADER_INCLUDES)
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AC_SUBST(COGL_DEP_CFLAGS)
AC_SUBST(COGL_DEP_LIBS)
build: only have libcogl-pango depend on pango Only cogl-pango needs a dependency on pangocairo so we are now careful to separate the pangocairo pkg-config flags from the others so we can avoid having libcogl builds refer to them. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-02 09:14:06 -04:00
AC_SUBST(COGL_PANGO_DEP_CFLAGS)
AC_SUBST(COGL_PANGO_DEP_LIBS)
Include CoglGst CoglGst is a GStreamer integration library that facilitates video playback using the Cogl API. It works by retrieving each video frame from the GStreamer pipeline and attaching it to a Cogl pipeline in the form of a Cogl texture along with possible color model conversion shaders. The pipeline is then retrieved by the user during each draw. An example use of the CoglGst API is included in the examples directory. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit dfb94cf4b0b6b42d6465df362a0c0af780596890)
2013-02-22 09:56:05 -05:00
AC_SUBST(COGL_GST_DEP_CFLAGS)
AC_SUBST(COGL_GST_DEP_LIBS)
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AC_SUBST(COGL_EXTRA_CFLAGS)
AC_SUBST(COGL_EXTRA_LDFLAGS)
cogl/configure.ac: AC_SUBST an empty MAINTAINER_CFLAGS For compatibility with the way we build Cogl as part of Clutter we now substitute an empty MAINTAINER_CFLAGS variable. When building Cogl standalone all our extra CFLAGS go through COGL_EXTRA_CFLAGS so the separate MAINTAINER_CFLAGS aren't used, but automake will get confused if a substitution isn't made.
2011-04-19 12:47:57 -04:00
# just for compatability with the clutter build...
MAINTAINER_CFLAGS=
AC_SUBST(MAINTAINER_CFLAGS)
cogl: Make cogl-config.h include check explicit Don't rely on some combination of macros, but an explicit definition to check whether cogl-config.h was included.
2018-05-21 16:18:03 -04:00
AC_DEFINE([COGL_CONFIG_H_INCLUDED], 1, [cogl-config.h was included])
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
AC_OUTPUT(
Makefile
tests: Adds our first white-box unit test This adds a white-box unit test that verifies that GL_BLEND is disabled when drawing an opaque rectangle, enabled when drawing a transparent rectangle and then disabled again when drawing a transparent rectangle but with a blend string that effectively disables blending. This shares the test utilities and launcher infrastructure we are using for conformance tests so we get consistent reporting and so unit tests will be run against a range of different drivers. This adds a --enable-unit-tests configure option which is enabled by default but if disabled will make all UNIT_TESTS() into static inline functions that we should expect the compiler to discard since they won't be referenced by anything. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 9047cce06bbf9051ec77e622be2fdbb96ed767a8)
2013-05-30 08:22:22 -04:00
test-fixtures/Makefile
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
cogl/Makefile
Make libmutter and friends parallel installable In order to minimize the amount of breakage, while at the same time making it easier to make backward incompatible changes needed to continue turning libmutter into a capable Wayland compositor, make the libmutter and friends (libmutter-clutter, libmutter-cogl*) parallel installable by adding a version number to the name. This changes various filenames, for example what previously was libmutter.so is now libmutter-0.so (assuming the version for now is 0), and libmutter-clutter-1.0.so is now libmutter-clutter-0.so. The pkg-config filenames and GObject introspection has been renamed to reflect this as well. This enables a downstream compositor rely on a specific version of the libmutter API, while gracefully handling API/ABI changes by having to update to the new version at their own pace. https://bugzilla.gnome.org/show_bug.cgi?id=777317
2016-11-25 11:16:07 -05:00
cogl/mutter-cogl-$LIBMUTTER_API_VERSION.pc:cogl/mutter-cogl.pc.in
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
cogl/cogl-defines.h
Don't include any GL header from the public GL headers This splits the GL header inclusion from cogl-defines.h into a separate headear called cogl-gl-header.h which we will only include internally. That way we don't leak GL declarations out of our public headers. The texture functions that were using GLenum and GLuint in the public header have now changed to just use unsigned int. Note however that if an EGL winsys is enabled then it will still publicly include an EGL header. This is a bit more awkward to fix because we have public API which returns an EGLDisplay and we can't determine what type that is. There is also a conformance test which just verifies that no GL header has been included while compiling. The test isn't added to test-conform-main because it doesn't actually test anything at runtime. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit ef5680d3fda5df929dbd0b420c8f598ded58dfee)
2012-03-23 14:05:46 -04:00
cogl/cogl-gl-header.h
Avoid including the EGL headers from the public Cogl headers Otherwise, X11 identifiers may leak and cause havoc in big applications Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ed0cdca0eca815543619fe72fbd42d662d53f92d)
2012-07-10 09:14:07 -04:00
cogl/cogl-egl-defines.h
consistently refer to cogl-pango as "cogl-pango" This renames the pango directory to cogl-pango and it renames the installed library to libcogl-pango instead of libcoglpango.
2011-05-05 17:04:07 -04:00
cogl-pango/Makefile
Make libmutter and friends parallel installable In order to minimize the amount of breakage, while at the same time making it easier to make backward incompatible changes needed to continue turning libmutter into a capable Wayland compositor, make the libmutter and friends (libmutter-clutter, libmutter-cogl*) parallel installable by adding a version number to the name. This changes various filenames, for example what previously was libmutter.so is now libmutter-0.so (assuming the version for now is 0), and libmutter-clutter-1.0.so is now libmutter-clutter-0.so. The pkg-config filenames and GObject introspection has been renamed to reflect this as well. This enables a downstream compositor rely on a specific version of the libmutter API, while gracefully handling API/ABI changes by having to update to the new version at their own pace. https://bugzilla.gnome.org/show_bug.cgi?id=777317
2016-11-25 11:16:07 -05:00
cogl-pango/mutter-cogl-pango-$LIBMUTTER_API_VERSION.pc:cogl-pango/mutter-cogl-pango.pc.in
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
cogl-path/Makefile
Make libmutter and friends parallel installable In order to minimize the amount of breakage, while at the same time making it easier to make backward incompatible changes needed to continue turning libmutter into a capable Wayland compositor, make the libmutter and friends (libmutter-clutter, libmutter-cogl*) parallel installable by adding a version number to the name. This changes various filenames, for example what previously was libmutter.so is now libmutter-0.so (assuming the version for now is 0), and libmutter-clutter-1.0.so is now libmutter-clutter-0.so. The pkg-config filenames and GObject introspection has been renamed to reflect this as well. This enables a downstream compositor rely on a specific version of the libmutter API, while gracefully handling API/ABI changes by having to update to the new version at their own pace. https://bugzilla.gnome.org/show_bug.cgi?id=777317
2016-11-25 11:16:07 -05:00
cogl-path/mutter-cogl-path-$LIBMUTTER_API_VERSION.pc:cogl-path/mutter-cogl-path.pc.in
Adds libcogl-gles2 frontend GLES2 api This adds a library that can be used instead of libGLESv2.so to provide symbols for the GLES 2.0 api. This can be used for convenience when using the cogl_gles2_context_ api since you don't need to manually go through a CoglGLES2Vtable when calling the gles2 api so it should be easier to port existing gles2 code to integrate with Cogl. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 80d7599a2acefca7d01d8d7de9df524278ef72c5)
2012-03-23 21:41:48 -04:00
cogl-gles2/Makefile
Make libmutter and friends parallel installable In order to minimize the amount of breakage, while at the same time making it easier to make backward incompatible changes needed to continue turning libmutter into a capable Wayland compositor, make the libmutter and friends (libmutter-clutter, libmutter-cogl*) parallel installable by adding a version number to the name. This changes various filenames, for example what previously was libmutter.so is now libmutter-0.so (assuming the version for now is 0), and libmutter-clutter-1.0.so is now libmutter-clutter-0.so. The pkg-config filenames and GObject introspection has been renamed to reflect this as well. This enables a downstream compositor rely on a specific version of the libmutter API, while gracefully handling API/ABI changes by having to update to the new version at their own pace. https://bugzilla.gnome.org/show_bug.cgi?id=777317
2016-11-25 11:16:07 -05:00
cogl-gles2/mutter-cogl-gles2-$LIBMUTTER_API_VERSION.pc:cogl-gles2/mutter-cogl-gles2.pc.in
Starts porting Cogl conformance tests from Clutter This makes a start on porting the Cogl conformance tests that currently still live in the Clutter repository to be standalone Cogl tests that no longer require a ClutterStage. The main thing is that this commit brings in is the basic testing infrastructure we need, so now we can port more and more tests incrementally. Since the test suite wants a way to synchronize X requests/replies and we can't simply call XSynchronize in the test-utils code before we know if we are really running on X this adds a check for an environment variable named "COGL_X11_SYNC" in cogl-xlib-renderer.c and if it's set it forces XSynchronize (dpy, TRUE) to be called. By default the conformance tests are run off screen. This makes the tests run much faster and they also don't interfere with other work you may want to do by constantly stealing focus. CoglOnscreen framebuffers obviously don't get tested this way so it's important that the tests also get run on screen every once in a while, especially if changes are being made to CoglFramebuffer related code. On screen testing can be enabled by setting COGL_TEST_ONSCREEN=1 in your environment.
2011-05-05 18:34:38 -04:00
tests/Makefile
tests: Adds our first white-box unit test This adds a white-box unit test that verifies that GL_BLEND is disabled when drawing an opaque rectangle, enabled when drawing a transparent rectangle and then disabled again when drawing a transparent rectangle but with a blend string that effectively disables blending. This shares the test utilities and launcher infrastructure we are using for conformance tests so we get consistent reporting and so unit tests will be run against a range of different drivers. This adds a --enable-unit-tests configure option which is enabled by default but if disabled will make all UNIT_TESTS() into static inline functions that we should expect the compiler to discard since they won't be referenced by anything. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 9047cce06bbf9051ec77e622be2fdbb96ed767a8)
2013-05-30 08:22:22 -04:00
tests/config.env
Starts porting Cogl conformance tests from Clutter This makes a start on porting the Cogl conformance tests that currently still live in the Clutter repository to be standalone Cogl tests that no longer require a ClutterStage. The main thing is that this commit brings in is the basic testing infrastructure we need, so now we can port more and more tests incrementally. Since the test suite wants a way to synchronize X requests/replies and we can't simply call XSynchronize in the test-utils code before we know if we are really running on X this adds a check for an environment variable named "COGL_X11_SYNC" in cogl-xlib-renderer.c and if it's set it forces XSynchronize (dpy, TRUE) to be called. By default the conformance tests are run off screen. This makes the tests run much faster and they also don't interfere with other work you may want to do by constantly stealing focus. CoglOnscreen framebuffers obviously don't get tested this way so it's important that the tests also get run on screen every once in a while, especially if changes are being made to CoglFramebuffer related code. On screen testing can be enabled by setting COGL_TEST_ONSCREEN=1 in your environment.
2011-05-05 18:34:38 -04:00
tests/conform/Makefile
tests: Adds our first white-box unit test This adds a white-box unit test that verifies that GL_BLEND is disabled when drawing an opaque rectangle, enabled when drawing a transparent rectangle and then disabled again when drawing a transparent rectangle but with a blend string that effectively disables blending. This shares the test utilities and launcher infrastructure we are using for conformance tests so we get consistent reporting and so unit tests will be run against a range of different drivers. This adds a --enable-unit-tests configure option which is enabled by default but if disabled will make all UNIT_TESTS() into static inline functions that we should expect the compiler to discard since they won't be referenced by anything. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 9047cce06bbf9051ec77e622be2fdbb96ed767a8)
2013-05-30 08:22:22 -04:00
tests/unit/Makefile
tests: Adds journal micro benchmark This makes the test-cogl-perf test from clutter into a standalone Cogl benchmark. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 1684a040b238ebae140e827f4003f2d2867c04f3)
2012-03-21 18:15:35 -04:00
tests/micro-perf/Makefile
Starts porting Cogl conformance tests from Clutter This makes a start on porting the Cogl conformance tests that currently still live in the Clutter repository to be standalone Cogl tests that no longer require a ClutterStage. The main thing is that this commit brings in is the basic testing infrastructure we need, so now we can port more and more tests incrementally. Since the test suite wants a way to synchronize X requests/replies and we can't simply call XSynchronize in the test-utils code before we know if we are really running on X this adds a check for an environment variable named "COGL_X11_SYNC" in cogl-xlib-renderer.c and if it's set it forces XSynchronize (dpy, TRUE) to be called. By default the conformance tests are run off screen. This makes the tests run much faster and they also don't interfere with other work you may want to do by constantly stealing focus. CoglOnscreen framebuffers obviously don't get tested this way so it's important that the tests also get run on screen every once in a while, especially if changes are being made to CoglFramebuffer related code. On screen testing can be enabled by setting COGL_TEST_ONSCREEN=1 in your environment.
2011-05-05 18:34:38 -04:00
tests/data/Makefile
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
)
dnl ================================================================
dnl Dah Da!
dnl ================================================================
echo ""
echo "Cogl - $COGL_1_VERSION/$COGL_VERSION (${COGL_RELEASE_STATUS})"
# Global flags
echo ""
echo " • Global:"
echo " Prefix: ${prefix}"
Make the default driver selectable at configure time When building COGL with multiple backends it can be useful to force a default driver to be selected. For example while for Debian we do want to build the GL renderer on ARM, GLESv2 is much more suitable as the default renderer on that platform. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8a43aa7167b56784f7b50c557391b990861d594f)
2012-06-20 03:47:41 -04:00
if test "x$COGL_DEFAULT_DRIVER" != "x"; then
echo " Default driver: ${COGL_DEFAULT_DRIVER}"
fi
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
echo ""
# Features
echo " • Features:"
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
echo " Drivers: ${enabled_drivers}"
drop remaining traces of support for directly linking libGL
2016-04-10 13:23:50 -04:00
for driver in $enabled_drivers; do
driver=`echo $driver | tr "[gles]" "[GLES]"`
libname=`eval echo \\$COGL_${driver}_LIBNAME`
echo " Library name for $driver: $libname"
done
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
echo " GL Window System APIs:${GL_WINSYS_APIS}"
if test "x$SUPPORT_EGL" = "xyes"; then
echo " EGL Platforms:${EGL_PLATFORMS}"
Adds _cogl_wayland_texture_2d_new_from_buffer API This adds internal API to be able to wrap a wayland buffer as a CoglTexture2D. There is a --enable-wayland-egl-server option to decide if Cogl should support this feature and potentially any EGL based winsys could support this through the EGL_KHR_image_base and EGL_WL_bind_display extensions.
2011-05-24 20:37:56 -04:00
echo " Wayland compositor support: ${enable_wayland_egl_server}"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
fi
build: Use the correct variable to indicate of cogl-gles2 will be built Instead of using the variable to use in Makefile.ams. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 016f2276823a8a8cde33d3e7062c61469921a9f1)
2012-09-17 16:38:29 -04:00
echo " Build libcogl-gles2 GLES 2.0 frontend api: ${enable_cogl_gles2}"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
echo " Image backend: ${COGL_IMAGE_BACKEND}"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
# Compiler/Debug related flags
echo ""
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
echo " • Build options:"
echo " Debugging: ${enable_debug}"
echo " Profiling: ${enable_profile}"
Add an option to avoid defining G_DISABLE_DEPRECATED G_DISABLE_DEPRECATED is only intended for developers of Cogl and it sometimes breaks the build for people just trying to build a release. This patch adds an option to enable deprecated Glib features. By default it is enabled for non-git versions of Cogl. The patch is based on similar code in Clutter except it adds the flags to COGL_EXTRA_CFLAGS instead of having a separate variable. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-09-27 05:27:19 -04:00
echo " Enable deprecated symbols: ${enable_deprecated}"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
echo " Compiler flags: ${CFLAGS} ${COGL_EXTRA_CFLAGS}"
cogl/configure.ac: add options to control driver/egl platform This allows more detailed control over the driver and winsys features that Cogl should have. Cogl is designed so it can support multiple window systems simultaneously so we have enable/disable options for the drivers (gl vs gles1 vs gles2) and options for the individual window systems; currently glx and egl. Egl is broken down into an option for each platform.
2011-03-10 10:15:08 -05:00
echo " Linker flags: ${LDFLAGS} ${COGL_EXTRA_LDFLAGS}"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
# Miscellaneous
echo ""
echo " • Extra:"
echo " Build introspection data: ${enable_introspection}"
tests: Adds our first white-box unit test This adds a white-box unit test that verifies that GL_BLEND is disabled when drawing an opaque rectangle, enabled when drawing a transparent rectangle and then disabled again when drawing a transparent rectangle but with a blend string that effectively disables blending. This shares the test utilities and launcher infrastructure we are using for conformance tests so we get consistent reporting and so unit tests will be run against a range of different drivers. This adds a --enable-unit-tests configure option which is enabled by default but if disabled will make all UNIT_TESTS() into static inline functions that we should expect the compiler to discard since they won't be referenced by anything. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 9047cce06bbf9051ec77e622be2fdbb96ed767a8)
2013-05-30 08:22:22 -04:00
echo " Build unit tests: ${enable_unit_tests}"
Adds the ability to build Cogl standalone This adds an autogen.sh, configure.ac and build/autotool files etc under clutter/cogl and makes some corresponding Makefile.am changes that make it possible to build and install Cogl as a standalone library. Some notable things about this are: A standalone installation of Cogl installs 3 pkg-config files; cogl-1.0.pc, cogl-gl-1.0.pc and cogl-2.0.pc. The second is only for compatibility with what clutter installed though I'm not sure that anything uses it so maybe we could remove it. cogl-1.0.pc is what Clutter would use if it were updated to build against a standalone cogl library. cogl-2.0.pc is what you would use if you were writing a standalone Cogl application. A standalone installation results in two libraries currently, libcogl.so and libcogl-pango.so. Notably we don't include a major number in the sonames because libcogl supports two major API versions; 1.x as used by Clutter and the experimental 2.x API for standalone applications. Parallel installation of later versions e.g. 3.x and beyond will be supportable either with new sonames or if we can maintain ABI then we'll continue to share libcogl.so. The headers are similarly not installed into a directory with a major version number since the same headers are shared to export the 1.x and 2.x APIs (The only difference is that cogl-2.0.pc ensures that -DCOGL_ENABLE_EXPERIMENTAL_2_0_API is used). Parallel installation of later versions is not precluded though since we can either continue sharing or later add a major version suffix.
2011-02-09 21:32:11 -05:00
echo ""
Reference in New Issue Copy Permalink