When more than one device exists, we need to reset the section title's
device to null, and in that case we must show nothing (neither the switch
nor the label, but an empty label is OK anyway). Also, we need to
update the device statusItem immediately when constructing it, as we
may not get any state-changed.
https://bugzilla.gnome.org/show_bug.cgi?id=646074
NMDeviceModem._createSection was not checking whether it should have
shown the connection list, resulting in status item shown even if
the device was in an invalid state.
Also, fix a logic error when creating the operatorItem and fix overriding
_clearSection protected method.
https://bugzilla.gnome.org/show_bug.cgi?id=646395
NMApplet connects to each NMDevice's state-changed signal and stores
the signal handler id on the NMDevice itself. However, it was using
the same name as NMDevice itself was using to store the handler ID for
the underlying GObject's state-changed signal, thus overwriting it,
and resulting in *neither* signal handler getting removed if the
device went away. (This probably isn't a problem, since the device is
going away, but it causes a warning.)
Also, at least for WWAN devices, the device state changes to UNMANAGED
immediately before disappearing, but getStatusLabel() wasn't handling
that case and printed a warning instead. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=646708
If you restart NetworkManager, then the list of active connections
is emptied, then comes back with the same GObjects in it. If the
_primaryDevice field isn't cleared on the object, then we won't
know we need to set it back on the device, resulting in the active
device not showing up in the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=646558
A notify signal does not include the new value of the property in
its signature, so the handler was trying to compare a GParamSpec with
a number when updating. Fix it to always retrieve the value from the
object.
https://bugzilla.gnome.org/show_bug.cgi?id=646443
Since the icon area is end-aligned, the signal strength icon for
insecure networks was ending up aligned with the lock icon for secure
networks. Fix that by always including a _secureIcon, but having it be
blank for the insecure networks.
https://bugzilla.gnome.org/show_bug.cgi?id=646121
Some connection types (like wimax) are not supported by the menu, and
should be ignored instead of throwing exceptions. Also, NetworkManager
had a bug that sent connections with invalid settings. This should not
happen, but in case it does, we will not blow up, but just log a warning
and continue silently.
https://bugzilla.gnome.org/show_bug.cgi?id=646355
When a device is connecting, we can continue showing available
connections and access points, as well as the active one with the dot.
(Hiding was a remnant of when the device status was on a different
menu item than the title)
https://bugzilla.gnome.org/show_bug.cgi?id=646381
A cosmetic change recommended in review of the patch to fix the
VPN Connections switch ended up introducing a logic error that
made the switch not work properly. Fix.
https://bugzilla.gnome.org/show_bug.cgi?id=646380
It was always reporting true, even if disconnected. At the same time,
add a signal that is emitted when state changes and update the UI
accordingly.
In the future (with another libnm-glib API break) we should use the
NMVPNConnection object to track the connection state, so that we can
show if we're connecting or we need authentication.
https://bugzilla.gnome.org/show_bug.cgi?id=646380
NMDevice._findConnection expects an uuid as parameter, but
checkConnection was passing a NMConnection object. This caused
exists to be always false, thus the connection was added again every
time the 'updated' signal was emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=645702
For wired devices (actually, ethernet devices), hide the connection
list when there is only one connection (either automatic or stored).
The device can be operated with the associated switch.
Since device state Unavailable is generic and has substates, instead
of using an hack for carrier, introduce some code that checks both
for carrier and firmware-missing when in that device state, and updates
the UI accordingly.
Different methos are being used to launch the control-center panels of each
status icon. Standarize on Shell.AppSystem.
This also fixes the network icon using a non-existant Util.spawnDesktop()
method.
Bug #645091
In commit 9bd22dc0, I introduced an API to load an arbitrary
.desktop file, not necessarily from the menu path. It turns
out this function was broken because it created ShellApp instances
that were *different* from ones that were cached normally.
As far as I can tell, we didn't initially use it. Then later
Util.spawnDesktop was created which used this function.
Remove this broken function and all callers; if we're loading
.desktop files from *outside* the menu path, we can look at
readding.
This patch also kills off Util.spawnDesktop in favor of callers
talking to ShellAppSystem directly, now that the latter reports
errors.
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Adds an implementation of nm-applet in javascript. Uses the new
introspection from NetworkManager, and temporarily requires
nm-applet to be running for the secret service.
Features a renewed interface, with each device controllable through
a switch, which if toggled off disconnects, and if toggled on
connects to the most recently used valid connection. More esoteric
features like creation of ad-hoc networks have been moved to the
control center panel.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Inside the inner loop, use the inner iterator, not that of the outer
loop. At the same time, refactor the code to rely less on private
properties appended to foreign objects.
https://bugzilla.gnome.org/show_bug.cgi?id=644858
GJS complains when a NaN is passed in place of an integer, and
parseInt returns that from non numeric string. Pass a sentinel
that cancels the operation in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=642978
When UPower has not yet collected enough data to calculate a time
to discharge, it will report 0 minutes. Show "Estimating..." in
that case instead.
https://bugzilla.gnome.org/show_bug.cgi?id=642753
The DBus JS binding will complain if the signature of a method
or of a signal is undefined, so we need to define it even if it
is an empty string, and we need to use the correct property name
for signals.
https://bugzilla.gnome.org/show_bug.cgi?id=643374
If the Shell is started with HighContrast enabled, it will never
see another value for the GSettings keys. In that case, we just
reset to the default.
https://bugzilla.gnome.org/show_bug.cgi?id=642641
The setting in org.gnome.desktop.default-applications.at
has been removed, use the corresponding setting in
org.gnome.desktop.a11y.applications instead.
The setting in org.gnome.desktop.default-applications.at
has been removed, use the corresponding setting in
org.gnome.desktop.a11y.applications instead.
The settings in org.gnome.desktop.default-applications.at
have been removed, use the corresponding settings in
org.gnome.desktop.a11y.applications instead.
gsettings-desktop-schemas had two conflicting settings for showing
the magnifier: 'show-magnifier' in org.gnome.desktop.a11y.magnifier
and 'screen-magnifier-enabled' in org.gnome.desktop.a11y.applications.
The former has been removed in favor of the latter, so adjust to this
change.
Add the machinery to cancel the notification when a new playing a
new one (wrapping ca_context_cancel), then use it when scrolling
the status icon.
Not doing it for the slider because it causes noise, either with the
keyboard, with mouse drag or with mouse wheel.
https://bugzilla.gnome.org/show_bug.cgi?id=633667
The status icon should always be visible if more than two layouts
are configured. The settings key which was used to enforce hiding
the icon in this case as well has already been removed from the
g-s-d schema, causing an error on startup.
Introduce a generic framework for on/off indicators that are shown
in the panel, next to the system status area, and use it for
showing the status of modifier keys.
https://bugzilla.gnome.org/show_bug.cgi?id=600771
Layout items in the menu overwrite PopupBaseMenuItem.activate(),
so the menu stays open when selecting a layout from the menu.
Chain up to the parent class' method to make the items behave properly.
https://bugzilla.gnome.org/show_bug.cgi?id=639474
Layout items in the menu overwrite PopupBaseMenuItem.activate(),
so the menu stays open when selecting a layout from the menu.
Chain up to the parent class' method to make the items behave properly.
https://bugzilla.gnome.org/show_bug.cgi?id=639474
Since we have to use pkill, kludgily, for the right combination of
portability and featurefulness, put the code in one place rather than
duplicating it everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Add Util.spawn, Util.spawnCommandLine, and Util.spawnDesktop for
spawning a command/argv/.desktop file in the background, automatically
handling errors via MessageTray.SystemNotificationSource(), and
Util.trySpawn, Util.trySpawnCommandLine, and Utils.trySpawnDesktop
that don't do automatic error handling (but do at least clean up the
error message in the exception a bit).
Update various other bits of code around the shell to use the new
methods.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Add an indicator for the current keyboard layout, based on
libgnomekbd. The indicator is shown when more than one group
is loaded in X and it is not disabled in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=600771
When BluetoothApplet::show-full-menu property is notified (when you
switch from a disabled adapter / no adapter to an active one), we
would show all the menu, including the device separator, without
checking if any devices actually existed.
https://bugzilla.gnome.org/show_bug.cgi?id=637690
When receiving a "devices-changed" signal from BluetoothApplet,
check if some device item corresponds to an existing one, destroy
the remaining and add the new ones.
With this patch, signal emission when no device actually changed
(which happen due to bluetoothd creating temporary devices) result
in a no-op.
https://bugzilla.gnome.org/show_bug.cgi?id=637690
Kill one separator by merging all global actions items at the end
of the menu, which ends up divided in three sections: status,
devices and actions.
https://bugzilla.gnome.org/show_bug.cgi?id=637690
Mixing submenu menuitems and toggle menuitems results in poor layout.
The fix is to right-align the submenu arrows. Since we already need to
right-align the battery percentages as well, add alignment support to
PopupBaseMenuItem.addActor(), and update stuff for that.
Also remove the "column" param from addActor() since it hadn't
actually been implemented correctly before.
https://bugzilla.gnome.org/show_bug.cgi?id=633476
The magnifier should be enabled/disabled via the appropriate
GSettings key - otherwise the setting gets out of sync with the
actual state of the magnifier.
https://bugzilla.gnome.org/show_bug.cgi?id=636151
We updated the normal devices part, but we forgot the part about
the primary device (possibly because it is not reported as such
in case it is fully charged). Update that as well, to avoid showing
weird GIcon serializations.
https://bugzilla.gnome.org/show_bug.cgi?id=635288
Reimplement UI without any indication of percentage or mutedness,
and whitout switches. The only interaction point is slider, but
it still supports mute changing for applications that track it,
and will react appropriately to external changes.
https://bugzilla.gnome.org/show_bug.cgi?id=634329
gnome-settings-daemon has moved to GSettings for most settings, we
should adapt as well. The only remaining GConf key is for metacity
(visual bell).
https://bugzilla.gnome.org/show_bug.cgi?id=634693
_volumeChanged should not update the icon if the sink is muted.
Fixes the case when shell is started with a muted sink (_mutedChanged
is called before _volumeChanged).
https://bugzilla.gnome.org/show_bug.cgi?id=632868
Add volume control indicator which uses API from gnome-volume-control
to interact with PulseAudio and shows both input and output volumes.
Also adds a small wrapper around libcanberra in ShellGlobal, used by the
volume indicator to provide auditive feedback.
https://bugzilla.gnome.org/show_bug.cgi?id=629455
Introduce the Universal Access status indicator as designed, modeled
after the similar UI provided by g-s-d. This indicator allows the user
to change rapidly the keyboard and mouse behaviour (sticky keys, slow
keys, bounce keys, mouse keys), as well as the enabled ATs (magnifier,
screen reader, screen keyboard) and the HighContrast Gtk theme.
https://bugzilla.gnome.org/show_bug.cgi?id=624916
