Commit Graph

180 Commits

Author SHA1 Message Date
494e628c38 dateMenu: Do not ellipsize date header
Currently the width of the calendar column is solely determined
by the calendar, while other elements are ellipsized as necessary.

While that is the desired behavior for the events-, world clocks-
and weather sections, we don't want to cut off the date in the
header. However switching to bold text made that more likely in
non-English locales or when using large text, so explicitly take
it into account for the width negotiation.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2230
2020-09-25 12:00:40 +02:00
980a90f8fb dateMenu: Do not ellipsize clock
This addresses the issue with ellipsized clock that occurs when using
extensions that move the clock from the middle to the side of the top
bar.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1327

Signed-off-by: MOZGIII <mike-n@narod.ru>
2020-06-23 16:14:24 +00:00
fdd9def922 dateMenu: Add "Events" section
Events have a clear and obvious connection to the calendar, and similar
to the Clocks and Weather sections there's a strong link to a particular
application.

Adding them as another section to the right-hand side of the calendar
therefore presents a viable alternative to the old events section.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1282
2020-06-06 01:04:09 +02:00
771050f4d7 messageList: Remove setDate() method
Since the events section has been removed and visibility no longer
depends on the date, it's not used by anything anymore.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1282
2020-06-06 01:04:09 +02:00
d36a180852 calendar: Remove events section from message list
While treating notifications as a type of present event was a neat
concept, there are some issues with it that we never managed to
address (not least the inability to "open" an event).

So remove the current events section from the message list; we'll
bring back events in a different form later.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1282
2020-06-06 01:04:09 +02:00
9b99b67fea Remove ClutterAllocationFlags
Those flags were removed from Clutter since they're pretty much unused,
so remove them here, too.

See https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1245

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1245
2020-05-20 15:12:03 +02:00
4e2ae30a47 dateMenu: Remove unused property
This is a left-over from an earlier iteration where the session's
presence status was used rather than the GSetting.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2796
2020-05-18 17:02:57 +00:00
64a3ecf9b1 dateMenu: Update timezone offsets when timezone changes
Adds a signal handler to update the timezone offsets whenever the
user changes the system timezone.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2209
2020-05-15 20:46:00 +00:00
da0c7fc2b6 dateMenu: Update empty weather label
Remove subtitle for the empty weather state
to match world clocks button.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2179
2020-04-09 10:52:44 -03:00
de16fe8dff dateMenu: Only use nearest city when appropriate
Since commit 784c0b7e4 we use the name of the nearest city rather
than the weather station, as the latter tend to have unwieldy
and weird names.

However the nearest city may not be that near after all, in which
case the result is again surprising.

Address this by not using the nearest city name unconditionally, but
only if it appears in the station name.

https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2468
2020-03-28 16:24:03 +00:00
6893fc3810 dateMenu: Show minutes for timezones that have minutes offset
Some timezones, like the one of Kathmandu don't only have hour-based
timezone offsets, but their timezones are also offset by minutes. So
instead of showing weird values like "+5.8", show the minutes properly
in a format like "+5:45".

Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/2438
2020-03-19 21:16:47 +00:00
13ef33ae0a dateMenu: Clean up timezone offset calculation a bit
Use const variables and change some names to make showing minute-offsets
in the next commit a bit more straightforward.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1107
2020-03-19 21:16:47 +00:00
b80115dc6e dateMenu: Don't ellipsize world clock time/tz
If we need to ellipsize, it should be the location name, not the time
or timezone offset.

https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1090
2020-03-17 13:44:30 +00:00
4c4d23ed83 dateMenu: Sync initial state of the message indicator
While the unread messages indicator is updated when starting a new
session because we call _onSourceAdded() on existing sources, we should
also update the do-not-disturb setting which might still be enabled.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1037
2020-02-25 16:47:29 +01:00
7173ec1df7 dateMenu: Remove an unnecessary change for RTL layouts
Calculating 1 - 0.5 is rather useless if the value was 0.5 before...

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1037
2020-02-25 16:47:24 +01:00
bc465ab006 theme: Hide panel underline under the do not disturb icon
Hide the focused/active indicator of the panel underneath the
do-not-disturb icon.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1037
2020-02-25 16:47:17 +01:00
6e7344b837 dateMenu: Use BindConstraint for indicator pad
Now that Clutter.BindConstraint modifies the size request in addition to
the allocation, we can use it instead of the custom IndicatorPad widget.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1026
2020-02-19 12:44:28 +00:00
8b0a67fe64 dateMenu: Hide overlay scrollbar in the notification popup
Since the design of the notification popup changed with the theme
refactor and there are now boxes around the world-clock and weather
sections, the overlay scrollbar that is shown above them looks rather
bad. So simply hide that scrollbar, we still have the vfade effect to
indicate the container is scrollable and we also depend on that in the
new popup app-folders.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1013
2020-02-19 11:47:04 +00:00
9d941f8202 js: Don't use templates in files with translations
xgettext gained some support for template strings, and no longer
fails when encountering '/' somewhere between backticks.

Unfortunately its support is still buggy as hell, and it is now
silently dropping translatable strings, yay. I hate making the
code worse, but until xgettext really gets its shit together,
the only viable way forward seems to be to not use template
strings in any files listed in POTFILES.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1014
2020-02-17 23:20:40 +01:00
9e9f3ff6b4 dateMenu: Indicate when do-not-disturb is on
When do-not-disturb is enabled, non-critical notifications will not
be shown as banners. It therefore makes sense to indicate that state
to the user, so they don't accidentally miss notifications.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
2020-01-22 21:55:28 +00:00
b4cf07d05f dateMenu: Add some spacing between date and indicator
While the existing dot doesn't necessarily need padding, we are about
to (sometimes) showing a "proper" icon there.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
2020-01-22 21:55:28 +00:00
aba3336b51 dateMenu: Bind pad visibility to indicator
Currently the indicator pad requests a size of 0x0 if the corresponding
indicator is hidden. Right now this is enough to balance out the indicator,
but it won't be when we add spacing to the parent container.

Properly hide the pad with the indicator to avoid that issue.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
2020-01-22 21:55:28 +00:00
6233d87e5b dateMenu: Move weather forecast time above icon
The time is de-emphasized like the header, grouping them together
helps to further accentuate the more important information.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1143
2020-01-09 17:13:24 +01:00
57751a2bef dateMenu: Tweak temperature labels
Together with the forecast icon, the temperature label is the most
important information in the weather section. To emphasize it more,
reduce its space requirement by removing the temperature unit, then
make the text bold.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1143
2020-01-09 17:13:19 +01:00
95f388b9a7 dateMenu: Don't ellipsize forecast times and temps
While those should be concise enough to fit, they may not where
temperatures drop into double-digit negatives. It seems better
to accept some awkward horizontal scrolling in that case than
shorten relevant information.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1926
2019-11-23 01:13:08 +01:00
e72c38b5ab dateMenu: Move weather forecast validity check
Commit b779f6f728 added a check to filter out invalid weather forecasts.

However the check is currently done when creating UI for the forecasts,
which means we end up with fewer forecasts than we could display if any
forecasts are invalid.

We can avoid that issue by checking the validity while collecting the
forecasts, so do that instead.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
2019-11-23 01:13:08 +01:00
f6f373b0c2 dateMenu: Only show forecasts
We currently always start with the current weather info, then append
forecasts. This is slightly confusing, as the only hint that the
first item is special is the past (and potentially "odd") time.

Stop doing that and base all items on forecasts.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
2019-11-23 01:13:05 +01:00
b757f5c655 dateMenu: Don't limit weather forecasts to the same day
As we get closer to midnight, we show fewer forecasts than we could
fit, or none at all. It makes more sense to continue the forecasts
into the wee hours in that case, so only exclude past forecasts,
but not ones from following days.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
2019-11-23 01:13:05 +01:00
784c0b7e4b dateMenu: Try harder finding a reasonable weather location name
Weather stations can have unwieldy long names, which don't fit the
limited space we have available. City names are usually more suitable,
so use the name of the nearest city instead if possible.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
2019-11-23 01:13:05 +01:00
f2df9f1ae4 dateMenu: Add some spacing between weather header and location
In case of a very long location name, the label may take up all
available space. Make sure there is at least some spacing between
header and location in that case.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
2019-11-23 01:13:05 +01:00
18a1435c25 dateMenu: Bottom-align weather title/location
The two labels use different font sizes, so they don't align properly.
Unfortunately we don't have BASELINE alignment in Clutter, but at least
END comes closer than the default FILL.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
2019-11-23 01:13:05 +01:00
669d12f957 dateMenu: Re-indent weather section
Before making code changes, make sure the class confirms to the
new coding style.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
2019-11-23 01:13:05 +01:00
b779f6f728 dateMenu: Skip weather forecast if not valid
GWeather.Info.get_value_update() may indicate that the forecast is not
valid, or it may return a timestamp of 0 to indicate the information has
never been updated. In both of these cases, skip creating a widget for
it, as the information will not be accurate.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
2019-11-20 13:08:22 -08:00
83f224e08b dateMenu: Format weather forecast times without AM/PM
If the clock is set to 12h, the AM/PM in the weather forecast times
should be clear from the context, because they are the immediately
following hours. This makes it less likely that the times will be
ellipsized (in which case the AM/PM wouldn't be shown anyway.)

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
2019-11-20 13:08:06 -08:00
e44adb92cf cleanup: Avoid unnecessary parentheses
Extra parentheses usually add noise rather than clarity, so avoid
them.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
2019-11-11 19:25:14 +00:00
ebf77748a8 cleanup: Require "dangling" commas
Since ES5, trailing commas in arrays and object literals are valid.
We generally haven't used them so far, but they are actually a good
idea, as they make additions and removals in diffs much cleaner.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
2019-11-11 19:25:14 +00:00
07cc84f632 cleanup: Only omit braces for single-line blocks
Braces can be avoided when a block consists of a single statement,
but readability suffers when the statement spans more than a single
line.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
2019-11-11 19:25:14 +00:00
9eaa0089d0 cleanup: Fix missing/stray spaces
Those are wrong according to our style guidelines, but the previous
eslint ruleset didn't catch them.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
2019-11-11 19:25:14 +00:00
67ea424525 cleanup: Avoid unnecessary braces
Our coding style has always been to avoid braces when all blocks
are single-lines.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
2019-11-11 19:25:14 +00:00
f2bd39b20c js: Use generic actor properties to align StBin children
StBin's fill/align properties are now no-ops; get back the intended
child allocation by setting the corresponding x/y-align on the child.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/803
2019-11-04 21:27:56 +01:00
104071acbd js: Replace child properties
Every since commit aa394754, StBoxLayout has supported ClutterActor's
expand/align properties in addition to the container-specific child
properties. Given that that's the only container left with a special
child meta, it's time to fully embrace the generic properties (and
eventually remove the child meta).

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/780
2019-11-01 19:42:01 +00:00
55b57421dc cleanup: Replace signal connections with virtual functions
Inheriting from actors allows to use virtual functions instead of signal
connections for multiple cases, so just use them when possible.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
2019-10-16 15:26:13 +00:00
c4c5c4fd5c cleanup: Use inheritance for Actor classes instead of composition
Remove the `this.actor = ...` and `this.actor._delegate = this` patterns in most
of classes, by inheriting all the actor container classes.

Uses interfaces when needed for making sure that multiple classes will implement
some required methods or to avoid redefining the same code multiple times.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
2019-10-16 15:26:13 +00:00
b5676a2a5c messageTray: Inherit Notification, Source and NotificationPolicy from GObject
Register notifications, sources and policies as GObject gtypes so that they can
be passed in signals and use native properties and signals.

Reimplement all the extending classes.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
2019-10-16 15:26:12 +00:00
ff775213a5 calendar: Use GDateTime for selected-date-changed signal
Since GObject derived classes can't use JS objects as signal parameters, let's
go native and use GLib.DateTime instead.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
2019-10-16 15:26:12 +00:00
b446667df6 cleanup: Disambiguate assignments in arrow functions
As arrow functions have an implicit return value, an assignment of
this.foo = bar could have been intended as a this.foo === bar
comparison. To catch those errors, we will disallow these kinds
of assignments unless they are marked explicitly by an extra pair
of parentheses.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
2019-09-15 16:02:45 +02:00
af87bd8c87 cleanup: Use consistent style for ternary operator
We are currently inconsistent whether to put the operators in front
of the corresponding line or at the end of the preceding one. The
most dominant style for now is to put condition and first branch on
the same line, and then align the second branch:

  let foo = condition ? fooValue
                      : notFooValue;

Unfortunately that's a style that eslint doesn't support, so to account
for it, our legacy configuration currently plainly ignores all indentation
in conditionals.

In order to drop that exception and not let messed up indentation slip
through, change all ternary operators to the non-legacy style.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
2019-09-15 13:30:19 +00:00
451f4e3636 cleanup: "Only" use two indentation styles for object literals
We currently use no less than three different ways of indenting
object literals:

    let obj1 = {
        foo: 42,
        bar: 23,
    };

    let obj2 = { foo: 42,
                 bar: 23 };

    let obj3 = { foo: 42,
                 bar: 23
               };

The first is the one we want to use everywhere eventually, while the
second is the most commonly used "legacy" style.

It is the third one that is most problematic, as it throws off eslint
fairly badly: It violates both the rule to have consistent line breaks
in braces as well as the indentation style of both regular and legacy
configurations.

Fortunately the third style was mostly used for tween parameters, so
is quite rare after the Tweener purge. Get rid of the remaining ones
to cut down on pre-existing eslint errors.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/716
2019-09-12 23:18:24 +02:00
3114a24d1f dateMenu: Stop accessing app settings directly
Clocks has exactly the same issue as Weather: Its integration currently
relies on accessing its settings directly, which isn't possible when
the app is sandboxed.

Fix this the same way we did for Weather, by adding our own setting
and syncing it with the app via a custom D-Bus interface.

https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
2019-08-08 17:41:46 +02:00
e357559582 cleanup: Mark globals used from other modules as exported
eslint cannot figure out that those symbols are used from other modules
via imports, so they trigger unused-variable errors. To fix, explicitly
mark those symbols as exported.

https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
2019-07-24 00:28:45 +02:00