Gestures leaving the overview from a short distance result in an
ugly effect with the panel opacity transitionhaving a fixed duration.
Make this transition have the same duration (although in a hackish
way) so we avoid the ugly effect.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
The gesture internally manipulates the main adjustment so one swipe
up brings up the overview, and a second swipe up brings the app
grid. The gesture also works in the other direction to get out of
the overview.
Internally, this is delegated on the OverviewControls, so the
adjustment is not leaked out of there. This however meant open
coding the gesture interaction so it can be directed from
overview.js code.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
This will be set whenever an event controller is manipulating the adjustment.
It should enter the same transitional state it does for animations. This
will be used by the overview gesture.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
Separate this logic from _switchWorkspaceBegin() and ensure it is set
before this call. The SwipeTracker code uses the orientation to determine
whether the gesture should begin at all, so changing the orientation on
gesture begin was a bit too late.
But also, that meant the SwipeTracker was left at the default orientation,
which was vertical (unlike workspaces, and like the overview gesture).
This made both swipe trackers try to handle the same swipe, with the
WorkspacesView being doubly unfortunate (for triggering in the first place,
and for happening after the other gesture did queue relayouts on it).
Taking this logic outside of _switchWorkspaceBegin() and having the right
orientation beforehand results in both gestures looking for their direction,
and not meddle with each other.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
We now have multiple touch swipe gestures with matching fingers and
different directions set on the overview hierarchy. Accepting all
touch swipes without checking the direction makes one of these gestures
take control of input, without other gestures having a say on this.
So, look for the direction of the touch events and look if it matches
the expected orientation before accepting the gesture.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
Make the touchpad gesture keep track of its state, and enter in a
rejected state if the swipe is happening in the wrong direction.
Effectively, this means touchpad gestures are locked on a single
direction, and horizontal+vertical swipeTrackers won't be handling
events at the same time.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
We now have multiple touch swipe gestures with matching fingers and
different directions set on the overview hierarchy. Accepting all
touchpad swipes without checking the direction makes one of these gestures
take control of input, without other gestures having a say on this.
So, look for the direction of the swipe events and look if it matches
the expected orientation.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1643>
Some actors don't have the scale applied to them directly but are
children of a scaled parent. In those case just retaining the scale will
not be enough and the scale of the actor itself needs to be adjusted
when reparenting. This could for example be seen when dragging windows
from the workspace thumbnails.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1687>
Even if activePage has been removed as part of commit 27627bd40, we've
still a reference of it in key press handler.
Given that there's no anymore an active page to redirect input to,
remove these references, so that can be handled in the proper view to
implement key-navigation.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1688>
When opening a large number of windows, the computed space and scale for
a layout can become negative due to the per-row/per-column spacing. This
is smaller than the initial values of lastSpace and lastSpace, leading
to a null return which then causes all sorts of other issues resulting
in the workspace becoming invisible.
This change ensures that the function always returns a layout, even if
it may look a bit broken and does not conform to the scale/space
requirements which are impossible to fulfill for the given number of
windows. It's better than displaying nothing, since it allows users to
move/close windows and restore this to a more usable state.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3730
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1685>
When we got an error, all the other HINT or INFO messages are not useful
anymore and delaying to show them is just a waste of time and may be
even wrong in scenarios with fast authentication devices.
An example are the fingerprint devices, where the user may touch the
sensor repeatedly while we may still show the "touch the sensor" hint
instead of notifying of possible errors.
So, in case we got an error override all the other errors coming from
the same service with lower priority.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
Once the verification has been stopped or has failed all the messages
that are not of error type are just not needed or wrong to show.
For example, in the fingerprint case we may still show the hint to swipe
or touch the device, while the fingerprint PAM service has already been
stopped.
So filter them by adding a new function that adds a null message to the
queue, overriding all the messages that have a lower priority.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
There are cases in which a service may want to override a message with
one coming with higher priority, for example an info or hint message
isn't useful anymore if we've already got an error message.
In the same way when a service has been stopped we don't care anymore
showing its info or hint messages, while it still may be relevant to show
errors.
An example is the fingerprint service that may emit errors quickly while
the hints messages should not be kept around when an error is already
queued or when the service has been stopped.
So, add function that allows to override queued messages based by their
type that follows this policy:
- Messages coming from different services are always preserved in
their original order.
- Messages (from the same service) with a priority equal or higher than
the last queued one are preserved.
- Messages matching completely the last queued are dropped in favor of
this one.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
It can be convenient to get the currently showing message in order to
replace or remove it in case it's not needed anymore.
So simplify the message queue handling by only depending on a single
local variable (_messageQueue) and redefining hasPendingMessages
depending on its content.
Now messages are kept in queue till they are not fully processed and the
first message is always the one currently shown.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
When a fingerprint failure event happens we may also soon receive a
conversation-stopped event with an error message (such as in the case
we hit the MAXRETRIES value), but this is going to be ignored in case we
are too quick in consider the first failure a verification-failed event
because that implies disconnecting from all the events and then ignoring
such signals.
To prevent this, add a small timeout before failing the verification so
that if we get a further event we will process it.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
In the case a service is not available (as it can be in the fingereprint
case when a supported reader is available but has not enrolled prints)
we were trying indefinitely to restart it, however this can lead to
troubles since commit 7a2e629b as when the service conversation was
stopped we had no way to figure out this case and we'd end up to
eventually fail the whole authentication.
However, in such cases the PAM services are expected to return a
PAM_AUTHINFO_UNAVAIL and gdm to handle it, emitting service-unavailable
signal.
So connect to ::service-unavailable and keep track of the unavailable
services so that we can avoid retrying with them.
In case such service is not the foreground one, we can just silently
ignore the error as we did before commit 7a2e629b, without bothering
failing the whole verification.
In case we got a valid error message on service-unavailable, we also
show it, this is normally not happening unless GDM isn't redirecting
here other kind of problems (such as MAXTRIES) which are supposed to
stop the authentication stopping any further retry.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3734
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1683>
When creating an icon for the system actions search provider, set the
icon size using StIcons own icon-size property instead of ClutterActors
width and height property. That ensures the scale factor is applied and
the icon will be properly scaled on hiDPI screens.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1686>
The icon and close button might be overlapping the window actor but
were not considered in has_overlaps() which gets used to decide whether
to offscreen the actor for transparency. Since currently the icon is
visible when the preview is dragged and the whole actor is turned
transparent, the opacity will not be applied to everything as a whole
but the child actors individually. This leads to the window becoming
visible behind the icon.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1684>
Calling startTouchGesture() on the workspacesViews can change the
visibility of the workspaces if not all of them are already shown, such
as when there are more than 3 workspaces or for 3 workspaces if we are
not on the central one. This invalidates the allocation and the width
used as distance for the gesture would become 0, resulting in drag
gestures immediately jumping to the first or last workspace due to a
division by 0.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3721
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1682>
Currently when the foreground service conversation stops we increase the
verification failed count and try to start it again, while if a
background service has been stopped we just ignore it.
This is causing a various number of issues, for example in the case of
the fingerprint authentication service, it is normally configured to die
after a timeout, and we end up never restarting it (while the UI still
keeps showing to the user the message about swipe/touch the device).
So, in such case let's just consider it a "soft" verification failure
that doesn't increase the failures count but will cause us to reset the
UI and try to restart the authentication (and so the affected service).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
Wiggle may make the error message to be visible for less time so provide
the auth prompt an API to increase the timeout to be used for showing a
message in some cases.
This could be reworked when we'll have a proper asyn wiggle function so
that we could just make the user verifier to "freeze", then await for
the wiggle transition to complete and eventually release the verifier.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
Currently whenever an authentication failure happens we wiggle the
entry, however this may not be related to the service which failed.
For example if the fingerprint authentication failed for whatever reason,
there's no point to wiggle the text input as it's something unrelated to it.
So, only apply the wiggle effect to the entry in case the failure is
coming from the querying service.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
By giving to the AuthPrompt information regarding the source service
name (and so the ability to know whether it's a foreground service) can
give it the ability to behave differently.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
Fingerprint PAM module can have multiple failures during a runtime
and we rely on the pam module configuration for the maximum allowed
retries.
However, while that setting should be always followed, we should never
ignore the login-screen's allowed-failures setting that can provide
a lower value.
So, once we have a fingerprint failure let's count it to increase our
internal fail counter, and when we've reached the limit we can emit a
verification-failed signal to our clients.
As per this we need also to ignore any further 'info' messages that we
could receive from the fingerprint service, as it may be configured to
handle more retries than us and they might arrive before we have
cancelled the verification session.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
Decouple the verification failure count increase from
_verificationFailed as there are some cases in which we may want to
increase it without emitting a verification-failed signal.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
When the login/lock screen is shown the error messages for background
services are always ignored.
However, in case the service is the fingerprint authentication method
we still want to be able to show error messages to inform the user
about what failed, and eventually that the max retries (that may be
different from the login screen configuration) has been reached.
This handles partially the design issue [1] related to the login/lock
screen fingerprint authentication.
Eventually we want to use pam extensions to use clearer and parse-able
messages, however in the case of the fingerprint service we can be sure
that the fprint PAM module will only send errors on auth failures.
[1] https://gitlab.gnome.org/Teams/Design/os-mockups/-/issues/56
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1652>
When we're painting off-stage, for example because we're screencasting
or taking a screenshot, there won't be a stage-view associated with the
paint context. The BlurEffect previously didn't handle that case and
would crash.
Fix that and handle that case by assuming the scale is 1 and not
offsetting the rectangle we blit from the draw framebuffer.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1673>
