When in lockscreen mode there's no point of resetting the auth login as there's
no welcome screen, and that would just cause the UI to freeze, with no reason.
This could have been useful if we were stopping the user to login for a given
time after ALLOWED_FAILURES attempts, but this is not the case yet.
When we get a reset signal the preemptiveAnswer should be also unset or it will
be used next time the user authPrompt will be activated, even without any further
user interaction.
Fixes#311
The _blockTimedLoginUntilIdle method sets a timeout to be called after
the user is idle for 5 seconds. That timeout is erroneously given the
source name "[gnome-shell] this._timedLoginAnimationTime" which looks
like a copy-and-paste mistake. The original intention was probably to
use a source name of "[gnome-shell] this._timedLoginIdleTimeOutId" which
more closely matches existing convention for source names.
This commit fixes that.
Make sure the focus isn't grabbed right after user interaction starts a
new timed login. Only grab it after the idle timeout is done and on the
first run instead.
Normally, we give the user a 5 second grace period of inactivity before
starting a timed login operation. Unfortunately, that grace period
timeout isn't properly removed if the timed login operation is restarted
during the grace period. That means the timeout handler can
inadvertently get called multiple times leading to the grace period
duration getting subtracted from the total animation time more than
once.
This commit ensures we only ever have one grace period timeout scheduled
at a time.
The timed login feature currently cancels the timed login operation when
a user presses a key but, oddly, only hides the indicator when the user
releases the key. This means that if a user holds down a key that
doesn't key repeat, the timed login indicator will continue to run after
the timed login operation is cancelled.
This commit address the problem by ensuring the timed login indicator is
hidden on any key press event, at the same time the timed login
operation is canceled.
When not using arrow notation with anonymous functions, we use Lang.bind()
to bind `this` to named callbacks. However since ES5, this functionality
is already provided by Function.prototype.bind() - in fact, Lang.bind()
itself uses it when no extra arguments are specified. Just use the built-in
function directly where possible, and use arrow notation in the few places
where we pass additional arguments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/23
Right now we emit session-activated any time the bullet
moves in the session menu. That includes at startup when
picking an item arbitrarily, and any time GDM reports the
session was read from the user's account settings.
session-activated informs GDM about the newly selected session,
so emitting it in response to GDM reporting a session is a
bad idea.
This commit changes the code to only emit session-activated when
the user explicitly activates a session item from the gear menu.
Note, we no longer set the active session explicitly at start up.
This is a good thing since the item we were picking wasn't
necessarily correct. It does means if GDM fails to inform us
about the correct default session we'll now show no bullet instead
of a bullet on the wrong item.
https://bugzilla.gnome.org/show_bug.cgi?id=740142
gnome-shell currently initiates an automatic login attempt if
timed login is enabled and the timed login animation completes.
Unfortunately, if animations are disabled (as is the case for
virtual machines) then the timed login animation will complete
instantly, and timed login will proceed immediately after gnome-shell
has noticed the user is idle for 5 seconds.
This commit addresses that problem by initiating timed login and the
animation from a main loop timeout, instead of using the tweener api.
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
While we've always considered it good style to initialize JS properties,
some code that relies on uninitialized properties having an implicit
value of 'undefined' has slipped in over time. The updated SpiderMonkey
version used by gjs now warns when accessing those properties, so we
should make sure that they are properly initialized to avoid log spam,
even though all warnings addressed here occur in conditionals that
produce the correct result with 'undefined'.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
The user list uses the same indication for hover and focus, so it
is possible for two items to be highlighted at the same time. Using
different styling would improve the situation, but only to some
extent - the user would still need to figure out which highlight
corresponds to which activation method. So instead, copy the
approach we use in popup menus and use a single property for
highlights that is updated by both focus- and hover changes.
https://bugzilla.gnome.org/show_bug.cgi?id=772284
Some PAM modules say "Press enter to continue" or
whatever. We need to support them.
This commit allows empty responses to PAM questions,
but still requires a non-empty response for username.
https://bugzilla.gnome.org/show_bug.cgi?id=784360
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by skipping a retry if
the operation is cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=784361
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by guarding against the retry
if the fail counter is reset.
We rely on the service to detect whether a fingerprint reader is
present. It is fine to not support fingerprint authentication
when the service is missing, but currently we don't handle this
case at all and end up with a non-functional login screen.
https://bugzilla.gnome.org/show_bug.cgi?id=780063
It's weird if after you select a username from the user list, there's
a password already filled in.
This commit disables at that feature for the login screen
(but keeps it in tact for the unlock screen)
https://bugzilla.gnome.org/show_bug.cgi?id=766139
When the user gets long failure messages from pam, the authPrompt
message label will clip the message and ellipsize with '…'.
This commit turns off ellipsization from the label, so it will
properly wrap.
https://bugzilla.gnome.org/show_bug.cgi?id=764445
If the user clicks Not Listed? to enter ask for username mode, clicks
cancel, and then attempts to log in via the user list, the user will see
"Authentication failed" after correctly typing the password, and then
will become stuck in an empty screen with just the gray noise background.
The problem is, we forgot to disconnect from the signal that's waiting
for the next button to be pressed on the username entry screen. Since
the signal handler that executes here is expecting the username to be
input, and isn't prepared for us to have switched back to user list,
various bad things happen. We try to start two gdm-password
conversations at once, for instance, one using the user's password as
the username. I stopped investigating here, because it's easy to fix by
disconnecting from the signal at the right time.
https://bugzilla.gnome.org/show_bug.cgi?id=770328
The Next and Sign In buttons are disabled when the username/password
field is empty. However, the user can still bypass this button by
pressing the enter key, leading to some odd glitches with the log in
for 'Not Listed?' users.
This is easy to fix by simply not progressing to the next screen when
the button is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=746180
Generally a user-changed operation will be uninteresting, but if the
user is currently in the user list and the account changes to locked, we
want to remove it from the list, or if the user is not in the list and
the account changed to unlocked, we want to add it to the list. This
fixes the case where a new user account created in gnome-control-center
does not appear in the user list. The password mode is set in the new
account immediately after it is created, but the operations are not
atomic, so the login dialog considers the new user account when it is
still locked and rejects it from being displayed, then immediately
afterwards the account is unlocked. This commit causes the login dialog
to show the account when this occurs.
The containsUser() check here is not strictly necessary, but reduces
spurious calls to addUser() and removeUser(), since there's no easy way
to check if the locked status of the account has changed (as it's much
easier to connect to one signal on the UserManager than to
notify::locked on each User object).
https://bugzilla.gnome.org/show_bug.cgi?id=758568
LoginDialog has a private _user, but UserListItem has a public user.
Easy to get wrong since _user would be the right thing to type in 90% of
this file.
We currently will always allocate the user list's preferred size, so it
will grow indefinitely and never scroll; limit the height instead to
get the desired scrolling behavior when necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=754525
When the user successfully types their password, we should hide
the spinner from the button well right away, so it doesn't
consume resources until reset (which may happen significantly later
if the user is vt switched away)
https://bugzilla.gnome.org/show_bug.cgi?id=753891
