`ShouldShowAirplaneMode` only considers whether airplane mode
should be shown for the form factor, not whether there are
any actual kill switches available.
That's tracked in a separate property, `HasAirplaneMode`.
Take that into account for our `:show-airplane-mode` property,
so that it reflects when airplane mode should and *can* be shown.
Right now we only show airplane mode when it is enabled (and
therefore available), but this will change in the future.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2385>
There's no good reason for waiting for the proxy to be initialized
to connect signals. In fact, connecting the signal beforehand
ensures that the handler is in place when the proxy fetches the
properties, so we don't have to call the handler explicitly.
That in turn will allow us in a follow-up to rely on the signal
parameters to only process changed properties.
To achieve that by constructing the proxy manually, and then
initialize it asynchronously in a Promise.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2385>
In case where there are multiple in- or output devices, pulseaudio
or pipewire can pick the "wrong" one by default.
Allow users to change devices without opening sound settings by
adding a submenu to the sliders when there is more than one device.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2380>
Since IBus does not provide this information right away, we
so far cannot do much about providing a truthful anchor position
for the preedit text. But with the Mutter API in place it will
be up to this object to do so in the future.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2384>
This behavior dates back all the way to the original gnome-shell
release, and it did make sense at the time:
- we were first to make notifications persistent instead of
closing them after a timeout; apps were therefore used to
treat notifications as fire-and-forget instead of closing
them when no longer relevant
- neither web notifications not portals did exist yet, so the
D-Bus API was only used directly, instead of as a backend
for other APIs; as a result, focusing the app was more likely
than not to put the source of the event that the user was
notified about into view
Nowadays both persistent notifications and web notifications
are wide-spread, so the original reasons no longer apply.
This change helps web notifications in particular, as it reduces
the differences between XDG and portal-based implementations.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2332>
GNOME Shell will only update extensions if the org.gnome.Extensions
app is present. This commit adds alternative support for
com.mattjakeman.ExtensionManager to the extension updating mechanism.
It enables updates to occur when extension-manager is the sole installed
tool on the system. When both applications are installed,
org.gnome.Extensions is preferred at all times.
Fixes#5564
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2358>
The logging function cannot be asynchronous, so move the override
into main.js where ExtensionUtils can be imported at the top level.
Importing ExtensionUtils in environment.js at the top level is not
possible because it would import Main prematurely.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2363>
ES modules do not allow exports to be overriden, in anticipation
of the ESM port add a `setCurrentExtension` utility which will
throw if used in the shell. This is tested using a conditional
import of Main.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2363>
We considered any ConnectFlag value major than SWAPPED as invalid, while
it's technically not fully true as we need to ensure that the passed
value is respecting the whole flags mask.
In fact, per se SWAPPED|AFTER (> SWAPPED) is a valid value (even if we
don't support the AFTER value).
But this makes the check more future-proof.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2366>
While untracking an object we used to compute it's proto for each signal
we were disconnecting from, while this is not needed when we're just
iterating over all the same owner signals, so let's add few more
functions to compute an object prototype, and repeat the disconnections
in the simplest way we can.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2366>
We used to create a temporary array of signal tracker keys and then to
iterate through them in order to untrack the objects, but the Map's can
be iterated directly so let's just use their native forEach.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2366>
Introduce a new class, EventEmitter, which implements signal
handling for pure JavaScript classes. EventEmitter still
utilizes GJS' addSignalMethods internally.
EventEmitter allows static typechecking to understand the
structure of event-emitting JS classes and makes creating
child classes simpler.
The name 'EventEmitter' mirrors a common name for this pattern
in Node and in JS libraries.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2043>
If we only raise screenshot UI to top, ibusCandidatePopup can still
cover screenshot UI because each time ibusCandidatePopup updates it's
visibility it will raise it to top and this also happens if we open
screenshot UI via keybinding. This commit fixes it by only raising it
above keyboardBox, because keyboardBox is above all entries in modal
dialogs.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2331>
ibusCandidatePopup actually works as a top chrome because it always
raises itself above top_window_group when updating visibility, so just
initing it as a top chrome instead of initing it below top_window_group.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2331>
The overviewGroup's size is currently determined by the coverPane
actor. That actor is only shown during transitions, so we rely on
ClutterFixedLayout including hidden children in its size request.
That odd behavior is about to change, so we need to make sure the
overview still requests the correct size.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2351>
When a window with a modal dialog gets minimized and at the same time
the dialog is closed, the WindowDimmer undim animation starts and gets
cancelled when the minimize animation is done, because that unmaps the
window actor.
In this case we want ensure the dimming effect still goes into a
proper state instead of being stuck mid-animation, so listen to
onStopped instead of onComplete for syncing state of the window dimmer.
While at it, clean things up a little and move the check for the
attach-modal-dialogs pref inside the _syncEnabled() function.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5581
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2349>
Right now, we don't pay much attention to visibility hints from IBus
about the candidates list for the OSK suggestions bar. Since some
IMs rely on this visibility being honored, do that.
To fix this, the visibility hints for the lookup table are now
propagated to the keyboard, so the Suggestions actor hides its
internal candidate buttons. Since the Suggestions actor gets its
minimum height from CSS, this does not result in OSK size jumps.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5601
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2347>
There is no hint about the currently selected language, but this exists
in the mockups. Add a dot ornament on the language that is currently
selected at the time of showing the OSK languages popup.
Since this popup is created from scratch every time it is shown, and
the popup is torn down with the OSK during replacement. This also
works for further times the languages popup is shown.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5598
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2346>
When calculating the on screen coordinates of events from the window
relative coordinates, using the frame rect will include the decorations
added by the WM for SSD windows. This was causing the calculated
coordinates to be slightly off. Fix this by using the client rect for
SSD windows.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2319>
Absolute screen coordinates are impossible for Wayland clients to
provide, because the clients don't know where the window is positioned.
Some clients, such as the ones using GTK 3 were providing window
relative coordinates even when screen coordinates were requested,
while others, such as GTK 4 clients, were just returning an error for
caret events or also window-relative coordinates for focus events.
So for this to work on Wayland we have to request window-relative
coordinates and translate them to the current focus window.
To ensure the correct coordinates, we have to only consider events
coming from the current focus window. All other events are filtered out
now. As a side effect this also fixes the magnifier always jumping
to a terminal cursor whenever there was some output, even if the window
was not focused.
This also needs some special handling for events coming from the shell
itself, which should not be translated to the focus window either. As
another side effect this fixes another bug that was caused by these
events already including scaling and getting scaled again.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5509
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2301>
If we don't set the height property to -1 before requesting the
preferred height, get_preferred_height() will just return us the fixed
height that has been set before. We don't want this behavior here, so
set the height to -1 before calling get_preferred_height().
This fixes a resizing issue where the keyboard is sized incorrectly
after switching the monitor into portrait mode and back.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2306>
Both bluetooth and screencast support are based on build checks
right now. However in both cases, the dependency is only consumed
at runtime via the typelib, so let's actually check for that.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2297>
We currently decide at build time whether to include screencast
support, based on whether the required gst/pipewire library headers
are installed.
That check is imprecise, because having the library headers available
at build time doesn't necessarily mean that the libraries are there
at runtime, or that the corresponding typelibs are installed.
It makes more sense to check the requirements at runtime, so prepare
for that by installing the screencast service unconditionally, but
bail out early if the dependencies aren't met.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2297>
The problem is that " 9:59 AM" (notice the space at the beginning) and
"12:59 AM" strings, when centred, look misaligned —
strings padded with a space look off to the right by nearly
half a character. This happens because the font feature "tnum",
used to make numbers monospace, doesn't work on spaces.
The commit overcomes this by aligning time labels to the end.
However, this won't work for locales with AM/PM strings of different
lengths, so they are aligned to the start instead to minimise offset.
It's too complex to know whether the used locale has different
AM/PM string lengths. Instead, every time the time changes, it
determines whether all the time labels have the same amount of characters.
Fixes#5438
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2294>
We update the visibility on state or stream changes, but those
changes may never happen if pipewire-pulse/pulseaudio isn't
available (for example when running as root).
Hiding the sliders is preferable in that case to showing non-working
controls.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2295>
When selecting the largest possible icon size for restricted vertical or
horizontal space the options for low resolution icons were rather coarse
grained. This could often result in seemingly too small icons being
chosen in the app grid on systems with low vertical resolution, because
the next larger size would exceed the limit by a few pixels.
This adds two more commonly used sizes for application icons to have
some more options with restricted space.
Helps: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2173
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2289>
Commit 7419674b changed some grabs from requiring both mouse and
keyboard grabs to be considered successful to only requiring either of
them.
Due to this it was possible for example to open the overview or the
screenshot UI with a client (such as Chrome when opening a menu) holding
the mouse grab. This then made it impossible to interact with the UI
using the mouse (or keyboard) and if attempted could result in an
unresponsive UI.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5414
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2287>
Commit ca4f6e0123 was supposed to show the
"cellular-disabled" icon when wwan is disabled. For wwan, just like for
bluetooth wwan networks, we probably want this to include the "not
connected" state, because disconnecting from cellular service de-facto
means disabling it.
So switch the check to show the "cellular-disabled" icon to also use the
icon whether there's no active connection, not only when the wwan device
is turned off.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5401
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2283>
The swipeTracker wants the distance between two pages passed to it in
confirmSwipe(). In case of the app grid, the correct distance is not the
size of the scrollView (which has the width of the whole screen), but
instead the allocation size of the iconGrid (which is the actual size
of a page in the grid).
So pass the allocation size of the iconGrid to the swipeTracker, this
makes sure the pages move perfectly in sync with the pointer when
dragging using the mouse or touchscreen.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2275>
With commit c29e0cf6e6 the grabHelper
already started using a similar mechanism to funnel events to the osk
while a ClutterGrab is in effect. ModalDialog, the unlockDialog and
lookingGlass don't make use of the grabHelper though, they use
Main.pushModal() themselves, so those need to funnel the events to the
OSK themselves.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2263>
We currently complete the animation using an onComplete handler,
which only runs if the corresponding transition was stopped when
finished.
While it is unexpected that the transition is interrupted, it can
apparently happen under some circumstances (like VMs with qlx).
The consequences of that are pretty bad, mainly due to the cover
pane that prevents input during the animation not getting removed.
Address this by always completing the animation when the transition
is stopped, regardless of whether it completed or not.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5337
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2269>
If one of these libraries breaks its GIR API in future, then upgrading
packages unrelated to gnome-shell might pull in the newer version,
causing gnome-shell to crash when it gets a newer GIR API that is
incompatible with its expectations. For example, this seems to be
happening in Debian testing at the moment, when GNOME Shell 41.4
imports GWeather and can get version 4.0 instead of the version 3.0 that
it expected.
Adding explicit API versions at the time the newer version is released
is too late, because that will still let the newer version of the GIR API
break pre-existing GNOME Shell packages. Prevent similar crashes in
future by making the desired versions explicit.
This is done for all third-party libraries except GLib, similar to the
common practice in Python code; if GLib breaks API, then that will be
a disruptive change to the whole GLib/GObject ecosystem, regardless.
Gvc, Meta, Shell, Shew, St are not included because they're private
(only exist in a non-default search path entry).
Clutter and Cogl *are* included, because we need to import the fork of
them that comes with Meta, as opposed to their deprecated standalone
versions.
Signed-off-by: Simon McVittie <smcv@debian.org>
Bug-Debian: https://bugs.debian.org/1008926
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2261>
MetaWindow.move_to_monitor() can no longer be assumed to have updated
the monitor on return, as under wayland, if the move involves a size
change, the monitor state will only be updated after the new size has
been synced with the client.
If that happens, trying to change the workspace of the moved window
fails, as it is still considered on-all-workspaces until it leaves
the secondary monitor.
It's possible to work around this by waiting for the window to actually
enter the requested monitor. That's finicky enough to warrant a helper
funtion, so add one.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/893
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2259>
If the timezone offset calculation in the World Clocks contains non-zero
minutes, then a decimal Hours value is being displayed. Limit the Hours value
to integers by using Math.floor().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2255>
On some hardware combinations the display can be known, then unknown again. Meaining that
when the update monitors function is called it will have a value, then be called again
setting this.primaryMonitor to null. If the timing is just right gnome shell will
loadBackground, then by the time the animation is ready the monitor will be gone,
thus methods will be called on a null value. This adds more checks for a valid
primary monitor, and wont play the animation until the system is idle AND has a valid
priamry monitor.
Fixes: #5003
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2144>
T_() is a convenience shortcut for looking up a string from the
locale defined by LC_TIME, but it isn't recognized as a gettext
keyword. To do that, we also have to wrap the string in N_() or
NC_().
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2246>
It existed to fade out/in `nautilus-desktop` for the overview, but it only
ever worked for X11 sessions (`Meta.WindowType.DESKTOP`) and
`nautilus-desktop` no longer exists anyway.
While I had suggested extending it in the past (!1395), that work was
never finished and since then the DING extension has implemented its
own visibility toggling. There seems little value in keeping the old
fade logic around in gnome-shell. Removing it actually fixes a bug with
DING (https://launchpad.net/bugs/1965072).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2244>
Creating these default folders still doesn't work. After some
investigation I found that's because the template we use for
the path when creating the `child` `Gio.Settings` instance
results in a double slash - it comes out as e.g.
/org/gnome/desktop/app-folders//folders/Utilities/ . dconf does
not gracefully handle this as many other things that handle
paths do, it considers it a programmer error. It results in
error messages like:
dconf_changeset_set: assertion 'dconf_is_path (path, NULL)' failed
which is slightly confusing. Anyway, we fix it by removing a
slash from the template.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2242>
Since the ClutterGrab rework, grabbing properly emits crossing events.
StButtons take a ClutterGrab as soon as they are pressed, so pressing
the close StButton of the WindowPreview takes a grab and causes a
LEAVE+key-focus-out event getting sent to the WindowPreview. This in
turn makes us hide our overlay (which the StButton is part of). We
automatically ungrab ClutterGrabs when hiding actors, so the StButtons
grab now gets released again, key-focus and hover state are updated
again and we emit an ENTER event to the WindowPreview. The preview now
tries show its overlay again and things explode because we re-enter the
mapping machinery.
For the LEAVE event we can break this cycle by detecting the GRAB_NOTIFY
crossing event of our own StButton and not reacting to that.
We should do the same for the key-focus-out event, but these don't pass
context information like a GRAB_NOTIFY flag yet, so just check the
current grab actor here.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3165
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2231>
Commit ba23279f1f was aimed at fixing a
bug where the layout is frozen so early that we don't have an existing
one to re-use, because no allocation cycle happened yet. It tried to fix
that by forcing the creation of a layout when needsLayout === true,
this turned out to be a bit too much, as it also forced creating a new
layout when the layout was frozen after closing a window (which would
set needsLayout to true).
To fix this regression and still avoid reintroducing the bug the
previous commit fixed, tighten the check a bit and only force creating
the new layout when there's no allocation yet. This makes freezing the
layout after closing a window work again.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2236>
The magnifier uses a PointerWatcher (which is based on a simple timeout
source) to update the zoom region based on the current mouse cursor
position 60 times a second. When updating the zoom region, it would also
hide mutters cursor using meta_cursor_tracker_set_pointer_visible().
Since a few months, mutter has decoupled the handling of input events
from the monitor refresh rate though, which means it's no longer
guaranteed that the cursor changes only 60 times a second (on higher
refresh rate monitors it actually never was). This means mutter might
show the cursor more often than 60 times a second, while we hide it only
60 times a second, leading to a flickering second cursor.
To fix this, implement the cursor-hiding by listening to
MetaCursorTrackers visibility-changed signal, and immediately hiding the
cursor again when it's shown.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2234>
We want to use the current event time for activating the workspace, and
this time is only available when calling global.get_current_time() or
Clutter.get_current_event_time() from the context of an event handler.
So instead of trying to get that time when the animation has finished
from the onComplete() handler, get it before and store it as a variable
to use in the onComplete() handler later.
This fixes an error message when switching workspaces using the swipe
gesture where MetaWorkspace complains about the 0-timestamp we pass it.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2233>
In testing on Fedora, gnome-shell crashes here:
JS ERROR: TypeError: DEFAULT_FOLDERS[folder] is undefined
This needs to be a "for of" loop, not a "for in" loop, because
`folders` is an array of the hash's keys, not the hash itself.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2238>
In a very un-StButton fashion, OSK keys are not interested in
altering the current focus state, as otherwise pressing those
will trigger a grab that will alter key focus, so the generated
key or IM state events will not be handled by the actor that
originally had the focus as long as the OSK key is pressed.
Despite being StButtons, OSK keys do already perform their own
press/release handling with internal state tracking, so it is
not a big stretch to simply consume the events, and update the
:active pseudo-class manually.
This makes OSK keys still look and behave as usual, but without
any grabbing shenanigans that might affect the focus state. This
makes all OSK keys work again.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4986
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2237>
In the case of bringing up the OSK while there is a grab (like, every
GNOME Shell entry), we used to special case event capturing so events
directed to the OSK would be let through.
When Clutter.Grab came around, events would be propagated only within
the actor hierarchy that holds the grab, which rendered this special
case just as useless as the OSK while a grab was hold. Since it wouldn't
be part of the grab hierarchy, clicking on the OSK would do nothing.
In order to let the OSK handle events, double down on the special case
and let it forward the event directly to the actor under the device,
instead of trying to let it through somehow. Since the actor under the
device are usually OSK buttons in this case, we don't need further
propagation to make it work, which makes the OSK functional again while
the shell holds a grab.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2237>
The screencast portal supports recording a single window,
and presents a list of open windows when that option is
selected. To allow updating that list when windows are
opened or closed, add a new "WindowsChanged" signal that
the portal can listen to.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2229>
The transition from the overview freezes the workspace layout at the
start of the animation, which means that the calculated window slots
remain the same while the workspace itslef grows. This causes the
windows to appear slightly shrunk in comparison to the workspace and
shifted to the top left. This is especially noticeable during the
beginning of the animation when there is more weight on the slots than
the original window position and if there are not that many open
windows.
Unfreezing the layout for this transition is not possible, because it
would cause issues with newly opened windows abruptly changing the
layout when the animation happens after starting a new app.
This change instead tries to scale the frozen layout to the current
workspace size. While this is not entirely correct, because this scales
the spacing between the slots as well, it is still more accurate than
the completely unscaled slots.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4616
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1980>
We currently assume that any '::destroy' signal on a GObject type
has the semantics of the ClutterActor/GtkWidget signal, and should
therefore result in all signals being disconnected.
But we already have a case where the assumption doesn't hold: ShellWM
uses '::destroy' for the closing animation of windows, and the ShellWM
object itself remains very valid after the emission.
So rather than making assumptions about '::destroy', check objects
against a list of destroyable types that are explicitly registered
as such.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2226>
On some touchpads/laptops, the swipe gesture to open the overview can be
performed so fast, that it starts and ends in between two frames. Now
when this happens, and the gesture ended with too little movement to
confidently say the user intended to open the overview, we'll close the
overview again.
While closing the overview, we freeze the layout of the Workspace in
order to avoid changes to windows messing with the animation. This means
that in the case described above, we freeze the layout even before the
first frame of the opening animation happens. No frames being drawn also
means no allocations happening, and since we create this._layout in
vfunc_allocate(), this means that on the first allocation cycle of the
overview we'll see this._layoutFrozen = true, but will also not have
a this._layout nor this._windowSlots.
This creates an annoying visual glitch where for a split second all
the windows disappear (overview is visible but no WindowPreviews get
allocated).
To fix this, force creating a layout on the first allocation cycle, even
if the layout is currently frozen.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2203>
In the panel we listen for button presses on the panel in order to start
a drag op of the adjacent maximized window. With the recent changes
removing the source detail of events from Clutter, we now can no longer
access buttonEvent.source, but instead need to use
ClutterStage.get_event_actor().
Since that function expects us to pass a ClutterEvent and not a
ClutterButtonEvent, let's listen for the "button-press-event" signal
instead of connecting to vfunc_button_press_event(). This will give us a
ClutterEvent we can work with.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2225>
While we don't want to position overview elements according to
the work area, it does apply in the session when the overview
is hidden. That is, we should take it into account for the HIDDEN
state, so that transitions from and to the overview are correct.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2223>
The work area is really the space that is available to application
windows. Applying it to the overview is therefore questionable,
in particular given that
- X11 clients that affect struts aren't shown
- elements added by extensions have other means
to affect the overview layout
Not applying the work area to the overview also makes ignoring
actors' visibility for struts acceptable again: Assuming that
strut actors are only hidden when the monitor is in fullscreen,
freezing the work area instead of updating it for windows that
are fully obscured by a fullscreen windows makes perfect sense.
This reverts commits 81a1e294f8 and 2b074882f4.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2223>
The changes violated too many assumptions on the mutter
side. And even if those were addressed, changing the
work area when a window enters/leaves fullscreen isn't
great, because it will force an expensive relayout on
all other windows.
This reverts commit cd1102ff30.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2223>
There are cases where we want to connect to a number of signals
for the lifetime of an object, but also other signals for a
limited period (say: between show and hide).
It is currently not possible to use disconnectObject() for the
latter, because it will disconnect all signals.
To address this use case, add a small class that can be used as
a transient signal holder, while still benefiting from autocleanup
by proxying the real owner.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2221>
The 'destroy' signal currently doesn't work with connectObject(),
because the handler is only connected after the signal tracker's
own destroy handler, which disconnects all handlers.
Address this by using connect_after for the cleanup handler, so
that other destroy handlers run before it (unless they also use
ConnectFlags.AFTER, but well *shrug*).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2221>
In order to make very short screen capture sessions more visible, let
the indicator remain visible, but a bit greyed out, for some seconds.
This makes it more obvious something was just capturing the screen.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2132>
Start using the new methods to simplify signal cleanup. For now,
focus on replacing existing cleanups; in most cases this means
signals connected in the constructor and disconnected on destroy,
but also other cases with a similarly defined lifetime (say: from
show to hide).
This doesn't change signal connections that only exist for a short
time (say: once), handlers that are connected on-demand (say: the
first time a particular method is called), or connections that
aren't tracked (read: disconnected) at all.
We will eventually replace the latter with connectObject() as
well - especially from actor subclasses - but the changeset is
already big enough as-is :-)
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1953>
The module exports a `addObjectSignalMethods()` method that extends
the provided prototype with `connectObject()` and `disconnectObject()`
methods.
In its simplest form, `connectObject()` looks like the regular
`connect()` method, except for an additional parameter:
```js
this._button.connectObject('clicked',
() => this._onButtonClicked(), this);
```
The additional object can be used to disconnect all handlers on the
instance that were connected with that object, similar to
`g_signal_handlers_disconnect_by_data()` (which cannot be used
from introspection).
For objects that are subclasses of Clutter.Actor, that will happen
automatically when the actor is destroyed, similar to
`g_signal_connect_object()`.
Finally, `connectObject()` allows to conveniently connect multiple
signals at once, similar to `g_object_connect()`:
```js
this._toggleButton.connect(
'clicked', () => this._onClicked(),
'notify::checked', () => this._onChecked(), this);
```
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1953>
The default folders used to be created by gnome-software, as that was
where folder management used to be implemented. Since then, folder
management via drag and drop was implemented in the shell, and the
gnome-software code was removed.
The only bit that still involves gnome-software are the default folders
that are created on first run. Given that everything else has moved to
the shell, it makes sense to take over that part as well.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4948
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2110>
It does not make sense that the target actor is both destinatary
and content of the events being sent, so this API call is going away.
Since the event can be sent entirely unmodified (more so, it will
become immutable/readonly in the future), avoid creating a copy
since it does not matter sending one or other struct.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2216>
With the porting of gnome-bluetooth to the new GListModel API the
behavior regarding removing adapters changed: It now no longer
guarantees to emit "device-removed" signals for the paired devices when
the adapter gets removed.
This means we need to do that ourselves now, so clear the list of
connected signals when the default adapter changes.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2214>
Turns out this broke showing the bluetooth menu entry for adapters which
rely on the had-devices-setup property being set while turned off. These
adapters are completely removed from the system by the firmware after
powering them off, so in that case there is no default adapter anymore,
although we still want to show the menu.
This reverts commit aaf47167b5.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2214>
We actually don't get a time from the xdndHandler when it emits
drag-end, so we fail right now when calling
workspaceManager.get_workspace_by_index(time).
Fix it by getting the time ourselves instead.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2211>
Only workspace groups that are associated with a workspace have a
background. As a result, when restacking window previews we end up
passing `undefined` to clutter_actor_set_child_above_sibling()
instead of null, triggering a warning.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2209>
We have made good progress on object literals as well, although there
are still a lot that use the old style, given how ubiquitous object
literals are.
But the needed reindentation isn't overly intrusive, as changes are
limited to the object literals themselves (i.e. they don't affect
surrounding code).
And given that object literals account for quite a bit of the remaining
differences between regular and legacy rules, doing the transition now
is still worthwhile.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2200>
It's unfortunate that we cannot fully embrace template strings, but
we aren't limited to "legacy" formatting either; replace the last
remaining places where we still use string concatenation to reduce
the difference between regular and legacy style a bit.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2200>
This commit adds support for Home and End keys to move
to the first and last workspace respectively.
Previously only Page_Up and Page_Down were recognized
to move one workspace at a time in overview mode.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2201>
The event passed to formatEventTime() is reused at a later point.
Therefore, we are not allowed to manipulate the event directly.
This fixes an issue where the user clicks on a multi-day all-day event
the second time before the event gets garbage collected and the event
then is one day shorter.
Fixes 528ee01fef
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2184>
WorkspacesDisplay connects to key-press-event on the stage to switch
workspaces when page up or down is pressed and nothing else intercepts
these keys. This means that it is still possible to switch workspaces
while they are hidden behind the search.
So only allow these keybinding while the WorkspacesDisplay is reactive
which gets updated by ControlsManager depending on whether there is an
active search or not. Also set it as initially reactive, because
otherwise the keybindings would only work after performing an initial
search.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2204>
There's a few things that are really unncessary to log without any
debugging enabled, for example "Getting parental controls for user", so
remove that.
Other things can be useful, so use console.debug() to log those.
Especially the warning in showAppInfo() we don't want log by default as
it spills tons of messages during shell startup (the async
initialization of the malcontent manager takes some time).
While at it, also make the !HAVE_MALCONTENT message a bit more accurate.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2196>
We're calling get_interval on tzA right now for both the tzA and tzB,
this causes a critical error during shell startup:
g_time_zone_get_offset: assertion 'interval_valid (tz, (guint)interval)' failed
Fix this and use tzB to get the offset for timezone b.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2195>
While _sync() does already handle the case where there's no adapter just
fine (hiding the item and the indicator), let's make the handling a bit
more obvious and add an explicit check for !this._adapter where we bail
out and hide the UI.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2188>
There's two ways bluetooth can be powered off/on for us: One way is to
go via airplane mode (which uses rfkill), and the second way is to tell
BlueZ to turn off the device. Now rfkill always has the final say on
whether bluetooth is off, BlueZ OTOH has the final say on whether
bluetooth is on.
This means when we want to know whether bluetooth is turned on, we only
have to ask BlueZ, so simply read this._client.default_adapter_powered
for that.
For turning bluetooth on or off we use rfkill, but when turning it on,
make sure it's turned on in Bluez, too.
FTR, this is exactly the same way the Bluetooth panel in Settings
handles this.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2188>
We currently use get_color(), which assumes the color exists in the
stylesheet (and prints a warning if it doesn't).
Switch to lookup_color() and skip filling the background if no
such colors exits.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2172>
The original popup included arrows that indicated the direction of
the switch. We stopped doing that a long time ago, and ever since
the popup has only indicated active vs. non-active workspaces.
Simplify both the API and style to reflect that.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2127>
The indicator shows the recording duration and lets the user stop it on
click. It is more discoverable than the stop entry in the aggregate
menu.
The class extends ButtonBox directly rather than Button because Button
does nothing that it uses, and actually causes issues with its dummy
menu (its vfunc_hide() throws an "open-state-changed: Error: incorrect
pop").
The menu-set signal declaration is required by the panel.
The screencast is stopped upon button press in vfunc_event(), which
matches PanelMenu.Button's input handling.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2163>
In a subsequent commit we will add a function to open the screenshot UI
in the screencast mode. This argument will allow us to do that without
resorting to accessing private fields from the outside.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2107>
This way we don't need to uncheck the other button manually, and it also
allows switching the mode by setting the other button's checked to
false, and not just by setting the target mode's button to true. An
example clean-up can be seen in the "V" key handler.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2107>
These two are moving into gnome-shell to unify screenshot handling and
allow for same-frame capturing.
While we're at it, move the keybindings .xml file from g-c-c here
because it belongs to gnome-shell.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2107>
We will re-use the same modes for more bindings in subsequent commits.
Also, while we're at it, invert the modes, to emphasize where the
screenshot UI cannot be used, rather than where it can be used.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2107>
It will be used for the window right-click menu and for handling keys
that are moving here from g-s-d.
Lockdown settings are also moving into the split _storeScreenshot() as
that is the only place where they are used.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2105>
- drop card style from calendar
- remove focus ability from non-interactive calendar elements
- flesh out the styles for the calendar grid
- fix margin and padding issue with login screen calendar
- update no-notifications icon
- add padding to media player buttons
- catch a couple other minor style papercuts
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2161>
This reverts commit fdac0602db.
The commit was fixing a crash, which cannot longer be reproduced, but also
introduced a noticeable white flash when switching wallpapers. This will
become even more noticeable when we try to uniformly transition the whole
screen.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2070>
If the finish function isn't specified, promisify will now try
to use the async name without '_async'/'_begin' suffix (if any)
and '_finish' appended.
Everything except IBus uses a variation of that pattern, so there's
quite a bit of boilerplate we get to remove…
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2174>
As users can have different primary mouse buttons (left vs right) it
might happen, that a user with a different
preference wants to switch. Currently they need
to use the mouse button, that the current
user prefers.
This change enables users to use either the left or right button.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1972>
Currently when switching from a popup menu to another in the same
manager, we first show the new menu, then hide the old menu and
remove its grab, then create a new grab for the just shown menu.
This briefly ungrabbed moment will still trigger keyboard focus
changes, that might have other visible effects. In order to fix
this, change the grabbing order so first the new grab is created
then the old one is dismissed. This ensures focus moves from the
old menu to the new menu without gaps in between.
Since a grab is tied to an active menu, but close/grab are now
slightly decoupled, also ensure closing a menu only tears down its
own grab. This is necessary for correct accounting while doing the
grab shuffling.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5039
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2166>
The current preference API - buildPrefsWidget() - predates client-side
decorations. While extension authors have been finding ways around
the limitation of not having access to the window/titlebar, the change
to the new Adwaita API seems like a good time for an updated API that
officially provides that access (as far as allowed by libadwaita).
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2012>
Adapt the new GNOME platform API for the upcoming 42. This makes
sure that we get the latest version of the stylesheet, as well as
support for the new dark mode.
Using the dedicated preference API also gives extensions with more
complex preferences an easier and standardized way for implementing
multi-page preferences.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2012>
The error UI comprises the bits that are actually custom. Splitting them
out from the off-the-shelf window makes it easier to replace the dialog
with libadwaita's dedicated preference window.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2012>
Use GLib's spawn_async() instead of Gio.SubprocessLauncher() which does
not support the child setup function to start ibus-daemon.
This way we can restore the NOFILE limit prior to run the ibus-daemon.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2117>
The REPLACE flag we currently pass is useless, as replacing the service
is disallowed when not started with the ALLOW_REPLACEMENT flag.
Fix this by adopting a more standard pattern where replacement is always
allowed, but only actually requested when `--replace` is passed on the
command line.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2152>
All fd.o Notifications signals are emitted for a particular notification,
so debugging aside, only the owner of said notification has a legitimate
reason to act on it.
So far we (and other implementations like the old notification-daemon)
have relied on the client-side to properly filter the signals (like
libnotify), but at least the QT implementation is known to not do
that.
Enforce correct client behavior by only emitting the signal to the
original sender.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5008
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2153>
- move all icons to the icons directory
- rename some icons to be more meaningful
- put all icons on a resource sheet
- update references to icon name changes
- deprecate icons for those in standard set
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2141>
CSS and JS adapted from the Overview window close buttons, but with some
style tweaks requested by the designers.
Since the screenshot UI is long-lived (it's created once at startup,
rather than every time it's opened), we need to refresh the close button
position, as it can change at runtime. Subscribing to preference changes
seems to be skipped for bindings generation in Mutter, but simply
refreshing upon opening the UI should do the job.
Closes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4997
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2147>
This was here exclusively to silence out events from other pointing
devices in the stage. Since ClutterGrab being used now is global to
all devices and events are coerced to an invisible actor, there is
no need to explicitly do this.
Also, this event handler was set on the stage, while the grab happened
on a child, so it was fairly uneffective already.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2146>
Since the grab no longer lets events bubble up to the stage unstopped,
we should be forwarding the key events that bubbled up to the dialog
to maybe cycle focus.
Fixes broken keyboard navigation in several context menus around the
shell, other than the panel ones.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2140>
Since the grab no longer lets events bubble up to the stage unstopped,
we should be forwarding the key events that bubbled up to the dialog
to maybe cycle focus.
Fixes focus cycling on keyboard navigation inside dialogs.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2140>
Connecting to stage events won't work from a modal dialog, since the
grab will take events from the portions of the actor hierarchy above
the grabbing actor.
Connect to events from the dialog itself, so that the end session
dialog can again show the "boot options" easter egg.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2140>
Commit d92b71d2b2 went overeager in the removal of the additional
actors that were allowed to handle events (since the new grab
infrastructure makes them unable to see events in the first place),
and removed an early return in the captured event handler meant to
let events go through in those cases.
Since the grabbing actor was also part of this group, this was also
the code path where child actors of the grabbing actor could handle
events. Removing these made the captured event handler eat most
events meant for children. Add this check back, specifically for the
grabbing actor.
While at it, explicitly check (and propagate) crossing events,
since these are now enforced to be propagated (and warned about) in
Mutter.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4991
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2140>
With the new boolean setting, the "High Contrast" toggle can now
simply toggle the setting instead of the current gtk/icon-theme
shenanigans.
This isn't only much simpler, but will also make switching between
high-contrast and a non-default theme reliable at last.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2069>
Workspace transition stopped midway when the Meta key
was released while the two-finger scroll gesture was
in progress. This commit ignores the Meta key once
the gesture has been confirmed and is in motion.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2135>
This is specifically for stopping the screenshot UI screencasts for now.
It's possible to stop arbitrary screen recording handles, however due to
an issue with pipewiresrc, this method cannot currently work for cleanly
stopping Shell's own screen recordings. Hence the best we can do is to
handle just the screenshot UI screencasts to let them stop cleanly.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2103>
The screen recording menu entry will use this to check if a screencast
is currently active and to stop the screencast.
Use a GObject property so we can bind to notify; specifically we'll bind
the visibility of a screencast area indicator.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2103>
Currently does nothing. When we're in screencast mode, we hide the
screenshot preview because screencast doesn't start until the capture
button is pressed.
The window selection is currently left as is, but it should probably be
changed to something closer to a real overview, showing windows in
real-time.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2103>
And set the dialog actor reactive. Specifically, we do not know whether
the parent actor is reactive or not, and we should not be changing that
from here, so do not use that actor to handle key events.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2045>
All callers have been updated to keep this handle to identify their
own grab.
Also, optionally use the windowing state to determine whether
the grab is suitable for the specific uses. This removes the need
to trying to grab twice in the places where we settle for a keyboard
grab.
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/2045>
