And merge with the "internal" show/hide() ones. Those functions don't
proxy dbus method calls anymore, so it makes no sense to expose these.
Also, the timestamp is no longer needed as there is a single source for
these events.
https://bugzilla.gnome.org/show_bug.cgi?id=777342
The caribou daemon only gives us focus tracking, which is almost 1:1 with
our own FocusCaretTracker implementation. This means we can entirely
replace the Caribou daemon inside gnome-shell, reducing the Caribou
dependency to just libcaribou, and more specifically the
CaribouKeyboardModel we pull the keyboard models from.
As we still need underneath a CaribouDisplayAdapter to drive the keyboard,
reuse the wayland one, which has been renamed to make it look generic, plus
it will use the virtual input device API from mutter/clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=777342
Have it notify properly of changes to the current input source, as
well as exposing those in get_groups().
The support for virtual keyboard events has been replaced by
ClutterVirtualInputDevice, which can be thought of as the equivalent
to the XTEST devices in X11.
https://bugzilla.gnome.org/show_bug.cgi?id=765009
And make these only handled on wayland. There's a plethora of issues
around touch passive grab and touch/pointer doubly handling to use
these right away on X11, so we stick to single-touch/pointer there.
This reverts commit 032a688a72.
https://bugzilla.gnome.org/show_bug.cgi?id=750287
libcaribou was designed to generate X events which works under wayland
sessions for X clients but obviously doesn't work for wayland clients
and for shell chrome.
This patch adds a simple caribou display adapter which inherits from
its X display adapter and allows us to continue to work for X clients
and at the same time makes the OSK work on shell text entries by
sending key events directly to the focused text actor.
Making the OSK work for wayland clients requires much bigger changes
at various levels in the stack and either not using libcaribou or
re-working it substantially so that's left for future work.
https://bugzilla.gnome.org/show_bug.cgi?id=747274
Instead of listening to a dbus property exported by g-s-d, listen to the
MetaBackend signal telling the last interacted device, and make sure we
only show the keyboard for touchscreens.
https://bugzilla.gnome.org/show_bug.cgi?id=745977
Calling g_dbus_proxy_new without any flag means that the caribou
daemon will be launched through D-Bus activation, when creating
a proxy. It smoked out some corner cases in caribou and at-spi2-core,
but generally it would be good to avoid creating unused process.
This patch delays the invocation until the "Run" method is called.
https://bugzilla.gnome.org/show_bug.cgi?id=739712
When the keyboard is destroyed, we destroy the keyboard actor, but the
keyboard's menu isn't part of the key itself, so it's never tracked.
The menus are actually tracked actors, so they slow down the layout
manager's code to rebuild regions and other things. Keeping this list
small is a good idea.
To prevent leaking menus, destroy the menu when the key is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=736999
Show the on-screen keyboard if gnome-settings-daemon requests that it
should be shown, such as when using a touchscreen input device. Do this
in addition to monitoring the accessibility setting for the OSK.
https://bugzilla.gnome.org/show_bug.cgi?id=702015
This reverts commit a84fb99c0a.
This commit didn't make the OSK fully operational yet on Wayland, and
caused the double emission of key events on X11 due to the OSK keys
receiving first touch events from the passive touch grab, and then
emulated pointer events from event selection after the touch sequence
was rejected in the grab.
When we make a better effort at handling touch events just once on X11,
this commit can be reapplied and remaining wayland OSK support resumed
from there. In the mean time, this patch is better reverted.
https://bugzilla.gnome.org/show_bug.cgi?id=735681
Handle touch events, so that an interacted button locks to a single sequence,
but multiple sequences are free to interact with multiple key buttons.
https://bugzilla.gnome.org/show_bug.cgi?id=733633
As far as I can tell, the only behavior change of a transient source
is that they auto-destroy after viewing their summary box pointer.
Since all transient sources are only associated with transient
notifications, it seems that we can never get to their summary box
pointer in the first place! Remove support for this.
https://bugzilla.gnome.org/show_bug.cgi?id=710115
Since GNOME 3.6, switching XKB layouts changes the group
configuration. This patch tries to track group configuration changes
and reconstruct UI as needed. See also caribou bug#694011.
https://bugzilla.gnome.org/show_bug.cgi?id=681735
Acting on each Show/Hide DBus call immediately may cause a lot of
jittery movement when Alt+Tabbing or even just switching tabs in
e.g. gnome-terminal.
To make the OSK feel sturdier, we wait a bit before actually showing
or hiding it so that we can coalesce tight sequences of Show/Hide
calls. I.e. the last call wins which means that we might end up not
doing anything.
https://bugzilla.gnome.org/show_bug.cgi?id=688646
We can't pushModal() when showing the subkeys popup because that will
cause the application to lose focus and thus we get a Hide() call for
the whole OSK.
Instead, capture events on the main OSK actor while the subkeys popup
is shown so that we can both prevent events from reaching the main
keys but also cancel the subkeys if the user clicks away in the OSK.
https://bugzilla.gnome.org/show_bug.cgi?id=674955
It's common to do actor.grab_key_focus() before the actor is mapped
which means that we can't reliably determine where the actor is at
notify::key-focus time and thus might end up showing the keyboard on
the wrong monitor.
This is happening, in particular, with the run dialog. Delaying until
we hit the main loop allows us to know where the actor finally is
before showing the OSK.
https://bugzilla.gnome.org/show_bug.cgi?id=685856
The keyboard is shown/hidden automatically when (un)focusing a
ClutterText actor. This behavior is unwanted when opening the
extended keys popup, so focus changes to the popup are ignored.
However, we also want to ignore focus changes from the popup
to avoid the keyboard hiding itself after pressing an extended
key.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
The keyboard is shown/hidden automatically when (un)focusing a
ClutterText actor. This behavior breaks with the message tray now
grabbing/releasing key focus when toggled. Fix this by ignoring
all focus changes to or from the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
Currently if a summary item signals that it has handled a click
itself, the tray hides itself. This behavior is wrong for the
On-Screen-Keyboard, which appears as a unit with the tray, so add
a property to opt-out of the default behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
GrabHelper automatically releases grabs when the user clicks outside
the grabbed actors. However at least for the message-tray (which is
the only user of grabHelper at the moment), we must ignore any events
from the On-Screen-Keyboard, to prevent the tray from hiding at every
key press.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
CLUTTER_CURRENT_TIME (like GDK_CURRENT_TIME and libX11 CurrentTime) is 0,
and thus compares lower than all valid timestamps, meaning that
focus changes without an X11 event in the stack are ignored by
the on screen keyboard.
https://bugzilla.gnome.org/show_bug.cgi?id=664309
Change visibleInFullscreen to be trackFullscreen. If true, visibility
is fully bound to fullscreen status, if false, no change is made.
This allows to avoid set_skip_paint(), while not messing with
visibility of actors that are sometimes hidden for other reasons.
The flag was reversed because only the panel uses it, so false is
a more useful default.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
For most subclasses, this is a direct swap -- a lot of the time, the
constructor was a blank class that override createNotificationIcon,
and called _setSummaryIcon in _init.
https://bugzilla.gnome.org/show_bug.cgi?id=661236
The onscreen keyboard should not follow the locale's text direction,
but order keys according to the selected keyboard layout. Effectively
this means enforcing LTR on the keyboard actor.
https://bugzilla.gnome.org/show_bug.cgi?id=672024
The last patch in the sequence. Every place that was previously
setting prototype has been ported to Lang.Class, to make code more
concise and allow for better toString().
https://bugzilla.gnome.org/show_bug.cgi?id=664436
Third step in the class framework port, now it's the turn of
MessageTray.Source and MessageTray.Notification, as well as
the various implementations around the shell.
https://bugzilla.gnome.org/show_bug.cgi?id=664436
js2-mode is no longer developed and we recommend js-mode these days,
so switch the modelines to specify that, and make them consistent
across all files.
https://bugzilla.gnome.org/show_bug.cgi?id=660358
This code was never tested very well, and has several problems
currently (windows creeping down and to the right, windows snapping to
a different location after you move them). To be fixed in 3.4.
https://bugzilla.gnome.org/show_bug.cgi?id=659643
