Any time estimates we can come up with are notoriously unreliable;
even on devices that report correct (dis)charging rates, any change
in workload, screen brightness etc. can throw our estimate off by
a huge amount. This is further compounded by bad firmware and battery
firmware which reports inaccurate data as neither Windows nor Android do
not use that data.
So instead, limit ourselves to only showing the current percentage
and leave its interpretation to the user.
As an added bonus, we end up with shorter strings that are less likely
to cause problems with ellipsization when translated.
https://bugzilla.gnome.org/show_bug.cgi?id=708472
If we detected that Bluetooth devices were setup, show the Bluetooth
menu so that users can easily turn Bluetooth back on.
This is a bit of a hack, as we cannot detect whether there is a
Bluetooth adapter at all when it's disabled, so we cannot tell whether
there were any Bluetooth devices setup, at some point. This state is
saved in the gnome-shell GSettings in the had-bluetooth-devices-setup
key.
Checking whether we saw Bluetooth devices at one point is a good
enough guess of whether there will be some in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=723848
* switch to a one-column layout (and adjust strings/widths
accordingly
* remove separator before system menu
* add link to account settings to user submenu for consistency
https://bugzilla.gnome.org/show_bug.cgi?id=751377
Follow the design we have in gtk+ for buttons dialogs,
which are at the bottom and they expand full width, having
the same amount of space for each one.
Also, since this removes any space for non-button widgets
in the button area, move the spinner present in the auth prompt
dialog next to the password entry.
https://bugzilla.gnome.org/show_bug.cgi?id=746108
Instead of using gnome-settings-daemon's D-Bus interface's presence.
iio-sensor-proxy now offers a D-Bus interface, which will exported
"HasAccelerometer = true" when an accelerometer is present.
https://bugzilla.gnome.org/show_bug.cgi?id=749671
Instead of saving only the current input source when entering password
mode, let's save the whole MRU list so that we can restore it when
returning to normal mode.
This is closer to user expectations since password mode is a transient
and short lived state.
https://bugzilla.gnome.org/show_bug.cgi?id=746605
g-s-d has been taking care of this for us but in a very hackish way
that causes dconf writes on every startup and also doesn't handle
dynamic updates to locale1's properties which has become a problem now
that GDM keeps its greeter session running in parallel with users'.
To take care of this properly, this commit introduces a settings
abstraction with both system and session implementations. The session
implementation just wraps access to the existing gsettings while the
system one gets its values from org.freedesktop.locale1's properties.
https://bugzilla.gnome.org/show_bug.cgi?id=746288
The mode is never set after the removal of the bottom tray, so it
no longer makes sense to pass it to allowKeybinding(). We can also
safely remove it from the ActionModes flags altogether without
requiring a synchronized update with gnome-settings-daemon, as
the latter never used any flag value above LOGIN_SCREEN.
This used to be the style-class for status icons (i.e. icon-only
top bar items). It got unused a while ago when the class used
by status icons stopped using it - except for the keyboard indicator,
which set the class manually to appear as status icon despite not
being a real icon.
Now that the button highlight is provided by the .panel-button class
on a parent, the obsolete class results in a double border on the
keyboard indicator when active - just drop it from there as well
to fix.
Input method preedit text needs to be disabled on password entries
for security and usability reasons.
IBus 1.5.7 provides the signal set-content-type so that panel UIs can
handle these special purpose input entries:
https://github.com/ibus/ibus/commit/6ca5ddb302c9
Unfortunately IBus versions older than 1.5.10 have a bug which causes
spurious set-content-type emissions when switching input focus that
temporarily lose purpose and hints defeating its intended semantics
and confusing users. We thus don't use it in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=730628
Due to a typo we were always removing the first (index 0) connection
from the global list of connections instead of the correct one.
This resulted in some connections remaining in the shell's connection
list long after they were removed. In particular, this resulted in
multiple copies of a bluetooth connection appearing after suspend/resume
(when the device was readded and the cached connection list was
rescanned).
https://bugzilla.gnome.org/show_bug.cgi?id=740227
Normally users switch xkb input sources and ibus input sources.
But currently the first input source only is running. It's also good
to preload all ibus engines in the logging session so that users switch
input sources quickly without the launching time of input sources.
The following is the ibus change:
https://github.com/ibus/ibus/commit/cff35929a9https://bugzilla.gnome.org/show_bug.cgi?id=695428
Most of the code handles the sources setting being empty and
InputSourceManager.currentSource being null because previously the
"model" (i.e. the sources list) was kept in gnome-settings-daemon.
But this is fragile and since we're now the canonical place where the
list lives we can force it to never be empty even if the gsetting is
empty or contains only invalid entries. Adding the default keyboard
layout in that case is the safest thing to do.
https://bugzilla.gnome.org/show_bug.cgi?id=738303
All other submenus link to the corresponding settings, so we should
do the same for location - the privacy panel in this case, which now
sports a "Location Services" switch ...
https://bugzilla.gnome.org/show_bug.cgi?id=736542
Instead of calling out to gnome-settings-daemon we'll just implement
the switching logic ourselves and use mutter APIs that allow this
functionality to work both in X sessions and when we're a Wayland
compositor.
Switching IBus engines is done transparently as well just like g-s-d
used to do.
https://bugzilla.gnome.org/show_bug.cgi?id=736435
We don't really need this step as a separate method since all
implementations are supposed to be created and shown immediately. This
also ensures that we have items to show in all subclasses.
https://bugzilla.gnome.org/show_bug.cgi?id=735976
The enums values of geoclue have gaps in them (so more levels could be
added in future) but enum values of settings don't have such gaps so we
gotta translate between them.
Since desrt says that enums as integers in gsettings are bad, we now
treat accuracy level settings as string.
This fixes the recent regression of geoclue only allowing geiop level
accuracy to apps.
https://bugzilla.gnome.org/show_bug.cgi?id=736479
Users can now toggle geolocation off/on from privacy panel of
gnome-control-center so we don't need to clutter the menu with a
settings that most users won't touch most of the time.
https://bugzilla.gnome.org/show_bug.cgi?id=731122
All derived classes are already checking explicitly for action names
(FOO and FOO_BACKWARDS). mutter used to have a META_KEY_BINDING_REVERSES
flag for keybindings which required special handling of "shift"+FOO as
FOO_BACKWARDS, but this has been removed now, so this special handling
is no longer necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=732296
When this flag is set on a MetaKeyBinding, mutter will know that
the keybinding has an associated reverse keybinding triggered with
the shift modifier. However, an undesirable side-effect is that
gnome-control-center keyboard panel does not know that this 'shift'
is reserved for these reverse keybindings and cannot detect
conflicting bindings in this case.
This 'reverse' logic can now be handled at a higher level (in gcc keyboard
panel) so this commit removes it from gnome-shell so that they do not
conflict.
https://bugzilla.gnome.org/show_bug.cgi?id=732296
Now that mutter gives a way to check if a MetaKeyBinding was marked as
'reversed' or not, gnome-shell does not have to hardcode that a
MetaKeyBinding using a shift modifier is reversed, it can directly check
if the appropriate flag is set.
https://bugzilla.gnome.org/show_bug.cgi?id=732296
Since these settings are now going to be accessed by
gnome-control-center as well, its more appropriate for them to live in
gsettings-desktop-schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=734483
Having the on/off setting be backed by a boolean in dconf makes sense
anyway but this is mainly to be able to remember the max accuracy set
before user disabled geolocation so that when they enable it next time,
we have the max accuracy level on same value as before.
There hasn't been a real need for this but now we are about to add
geolocation settings in control center and it'll be easiser for
control-center to simply toggle a boolean property rather than to have
to know about and deal with accuracy levels.
Later we might also want to add accuracy level settings to privacy panel
so keeping the accuracy level setting around still. However we no longer
support 'off' accuracy level as the new boolean property covers that.
This also implies that we no longer track available accuracy level,
which made the code a bit hard to follow/maintain.
https://bugzilla.gnome.org/show_bug.cgi?id=734483
Listen to changes in connectivity, and ask our helper to authenticate
when needed.
We don't have a URL to connect to yet (we will have when
the new NM API lands), so we use the default of trying
www.gnome.org (which is also more reliable because we can
recognize when the login is done)
https://bugzilla.gnome.org/show_bug.cgi?id=704416
Icons inside the menu are updated only for device state change,
but for the main device they also depend on connectivity (which
is a global property).
Add a public method to force an update of the icon, and call it
when connectivity changes.
https://bugzilla.gnome.org/show_bug.cgi?id=726401
We translate 'On' to available accuracy level but if available accuracy
level later changes, we don't update available accuracy level accordingly
and hence limit the accuracy of apps.
E.g if available accuracy level is 'city' and geolocation is enabled,
the max accuracy level would be 'city' and apps can't get higher than
that. Now if user plugs in GPS, the available accuracy level will change
to 'exact' but without this patch max accuracy level will remain to be
'city' and apps will not be able to use the GPS.
https://bugzilla.gnome.org/show_bug.cgi?id=731882
The code currently tries to use Meta.KeyBindingFlags.REVERSED. Since
this constant is |'ed with Meta.KeyBindingFlags.REVERSES, gjs silently
ignores the unknown flag.
https://bugzilla.gnome.org/show_bug.cgi?id=731619
When switching between alternatives in AltSwitcher, the currently
visible child is replaced with the alternative. If the original
child has the key focus when it is removed from the stage, the
focus is lost. Detect this case and manually move the focus to
the new child.
https://bugzilla.gnome.org/show_bug.cgi?id=727259
If geoclue reports that we can't aquire location, we hide the menu. This
will typically happen when user is offline (and doesn't have a 3G
modem). This is likely not what we want since this like a temporary
situation and user would want the ability to toggle geolocation still
even if its currently not possible any applications to query the
location.
https://bugzilla.gnome.org/show_bug.cgi?id=727398
* 'Turn On' -> 'Enable'
* 'Turn Off' -> 'Disable'
* 'Off' -> 'Disabled'
* 'On' -> 'In Use' or 'Enabled' depending on whether or not service is
in use.
https://bugzilla.gnome.org/show_bug.cgi?id=726498
In addition to BluetoothAirplaneMode, we need to check also
BluetoothHasAirplaneMode, which is indicative of bluetooth rfkill
devices (and by extension bluetooth adapters).
This prevents showing the menu if there is no adapter present.
https://bugzilla.gnome.org/show_bug.cgi?id=725057
Most system menu entries are disabled on the lock/login screen;
there is no good reason why users should be allowed to turn bluetooth
on/off (but not e.g. Wifi), so disable the entry as well.
https://bugzilla.gnome.org/show_bug.cgi?id=726319
NMApplet will call removeConnection() unconditionally on all sections,
including those that had nothing to do with the connection in the first
place.
Fixes:
Gjs-WARNING **: JS ERROR: TypeError: this._connectionItems.get(...) is undefined
NMConnectionSection<.removeConnection@resource:///org/gnome/shell/ui/status/network.js:323
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMApplet<._connectionRemoved@resource:///org/gnome/shell/ui/status/network.js:1885
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=725958
The profile name is most often not useful (because it's an
autogenerated string like "Wired Connection 1"), and even when it
is, it's already available in the submenu.
https://bugzilla.gnome.org/show_bug.cgi?id=725586
To be able to correctly setup dbus policy, I had to change the expected
agent D-Bus API a bit: Now object path is fixed and not different for
each user.
https://bugzilla.gnome.org/show_bug.cgi?id=725082
Until now the arrows were the associated arrow
character of the font. This cause some problems like
different arrows for different fonts, and size can be
altered because of the font size.
To solve that, use an image for the arrows.
https://bugzilla.gnome.org/show_bug.cgi?id=720206
Multiple connections for the same device are mutually exclusive, so
a switch is not the appropriate UI metaphor. Use a radio item instead,
and provide a separate "Turn off" item to disconnect.
Behavior when there is only one connection is not changed, there
is a single Connect/Turn off item.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
We don't watch for timestamp changes, and sorting by name keeps
the order consistent and predictable. In practice, there should
be at most 3 or 4 elements, so the user will always read all them
at once and sorting is irrelevant.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
If the connection name is changed, the UUID doesn't necessarily,
so checkConnection would take the early return path. Make sure
we update the existing menu item too.
https://bugzilla.gnome.org/show_bug.cgi?id=723570
The active_connection might be null, but the NMApplet code might
still belive the device wrapper is the primary connection (because
dbus signals are emitted one after the other).
(Also, remove an old and wrong comment about bluetooth in wwan code)
Fixes:
(gnome-shell:22511): Gjs-WARNING **: JS ERROR: Exception in callback for signal: icon-changed: TypeError: this._device.active_connection is null
NMDeviceWired<.getIndicatorIcon@resource:///org/gnome/shell/ui/status/network.js:475
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMApplet<._updateIcon@resource:///org/gnome/shell/ui/status/network.js:1790
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
_emit@resource:///org/gnome/gjs/modules/signals.js:124
NMConnectionSection<._addConnection/<@resource:///org/gnome/shell/ui/status/network.js:265
_emit@resource:///org/gnome/gjs/modules/signals.js:124
NMConnectionItem<._sync@resource:///org/gnome/shell/ui/status/network.js:137
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMConnectionItem<.setActiveConnection@resource:///org/gnome/shell/ui/status/network.js:169
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NMConnectionDevice<._activeConnectionChanged@resource:///org/gnome/shell/ui/status/network.js:327
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=723570
This reverts commit 5d05b66902.
Had a long discussion with Bastien Nocera and Allan Day on IRC about
this and in the end we decided to go with the simple on/off controls for
now.
Conflicts:
js/ui/status/location.js
https://bugzilla.gnome.org/show_bug.cgi?id=723684
When exact accuracy (i-e GPS) is available, allow user to disable that.
When users don't want application to get their precise location, they
can now opt for network-based geolocation only, which can be
street-level at best.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Instead of relying on geoclue to store this user configuration, lets
keep it in gsettings. Geoclue is a system service and therefore is not
the appropriate entity to keep this info.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
Now that we are indicating 'geolocation in use' to user, we better also
provide at least a way to disable geolocation. Once this is in place, we
can provide slightly better controls rather than simply on/off switch.
https://bugzilla.gnome.org/show_bug.cgi?id=723684
This reverts commit a36bfced47.
get_available_connections() returns the connections that are
available right now, ie, with the currently visible APs, but
that might change while the dialog is open, so we can't use it.
https://bugzilla.gnome.org/show_bug.cgi?id=709128
To distinguish the bluetooth network menu from the bluetooth
menu proper, use the device name as the label.
Also, replace Connect with "Use as Internet connection"
https://bugzilla.gnome.org/show_bug.cgi?id=709353
The design says "when a network cable is connected", not
"When a network cable is connected and the link is up and we
have an IP etc. etc." (which is what ACTIVATED would imply).
https://bugzilla.gnome.org/show_bug.cgi?id=723570
Rather than just showing "No networks", inform the user if airplane
mode is on or if wifi is off, and allow the user to change that
from the dialog (if possible).
https://bugzilla.gnome.org/show_bug.cgi?id=709128
Ideally, we should keep scanning while the dialog is open, and
stop (or reduce the frequency) when it's closed. Forcing a new
scan when the dialog is opened empty is a close approximation
and increases the probability that the user will find the AP
he needs.
https://bugzilla.gnome.org/show_bug.cgi?id=709128
If airplane mode is enabled with an HW switch, we can't turn it
off from the menu, so make the menu item insensitive and
replace it with a helpful tip.
https://bugzilla.gnome.org/show_bug.cgi?id=709685
It's a lot simpler and doesn't require us routing the NMRemoteSettings
all the way through. It's still a bit complicated to do this for the
usual connections, so let's drop it for now.
The org.gnome.login-screen schema contains a key to disable the
power/restart buttons; our support for this fell victim to the
new combined status menu, add it back.
https://bugzilla.gnome.org/show_bug.cgi?id=711244
Some consumers may want to construct their buttons specially, so allow them
to do that by adding a new API that takes a button instead of a label.
https://bugzilla.gnome.org/show_bug.cgi?id=710137
Their use blocks activation of the default button by keyboard, which
is important for accessibility. Use a Clutter.ClickAction instead,
which doesn't have this problem as it only considers mouse events.
https://bugzilla.gnome.org/show_bug.cgi?id=710144
Since the agregate menu does 120% of font-size, make this
for all dropdown arrows in gnome-shell and rename the css
class to make clear that it is used in overall gnome-shell
https://bugzilla.gnome.org/show_bug.cgi?id=709564
Show "Hardware Disabled" when disabled by HW switch, and
generically "Disabled" when airplane mode is active, as
indicated by v4 mockups.
Note that bluetooth is not affected by NM handling of airplane
mode (and generally the firmware makes the USB bluetooth
adapter disappear when rfkilled), so this is in NMDeviceModem
instead of NMConnectionDevice.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
The property is on the NMClient, not NMDevice. Also, make sure
we disconnect the signal when the item is destroyed.
Also, connect to wireless-hardware-enabled, which we'll use soon.
https://bugzilla.gnome.org/show_bug.cgi?id=709635
If the active connection for the device is not the primary or
activating globally, it won't have the _connection and _primaryDevice
expando properties, so grab them from the settings object.
https://bugzilla.gnome.org/show_bug.cgi?id=709043
The patch fixes the following warning, and along with it, the proper
destruction of the NMConnectionSection is performed so that items get
correctly removed from the menu.
(gnome-shell:24528): Gjs-WARNING **: JS ERROR: TypeError:
this.statusItem is undefined
NMConnectionSection<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:173
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMConnectionDevice<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:292
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
_parent@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:175
NMDeviceModem<.destroy@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:448
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._removeDeviceWrapper@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1421
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
NMApplet<._deviceRemoved@/home/aleksander/gnome/install/share/gnome-shell/js/ui/status/network.js:1416
wrapper@/home/aleksander/gnome/install/share/gjs-1.0/lang.js:213
https://bugzilla.gnome.org/show_bug.cgi?id=709248
Activating the GDM login screen switches VT and causes X to freeze
event processing (because it lost the drm master), so must make
sure to have painted the lock screen at least once before proceeding,
or the user can go back and see the unlocked desktop.
https://bugzilla.gnome.org/show_bug.cgi?id=708051
