The current microphone indicator only indicates if the microphone is in
use. Users might be also interested if their microphone is recording
or is muted, this commit enables that without opening the pop-up
menu. The microphone icon changes itself, depending on the sensitivity
of the microphone. It behaves similar to the already existing volume
indicator.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2902
In the past, the icon grid would update the number of pages
during the call to adaptToSize(). However, after the new grid
layout landed, the number of pages is updated by the time an
item is added or removed.
Instead of comparing the old and new number of pages in the
icon grid, compare the pages shown by the indicator, and the
grid pages.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
Now that we don't have the Frequent tab anymore, and subsequently
the buttons to switch tabs, the app grid fill all the way to the
bottom, leaving no room for drag overshoot.
Add a 20px (i.e. OVERSHOOT_THRESHOLD) area at the bottom of the
grid where dragging actually scrolls to the next page.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
The two BaseAppView subclasses now share a lot in terms of
widgetry: they both have a scroll view, pagination dots, swipe
management, etc.
Move this shared code into BaseAppView. Notice, however, that
BaseAppView only creates the widgetry, but it doesn't add them
to any specific layout. FolderView arranges the widgetry in a
vertical box, while AppDisplay arranges it in a ShellStack.
Add a new 'orientation' parameter to BaseAppView and use it
to determine the orientation of the pagination dots, the swipe
tracker direction, and the scroll event handling.
It is worth noticing that the scroll event is a bit more
sophisticated now: when the orientation is horizontal, it
handles all directions since mice wheels usually only generate
up/down events.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
When FolderIcon is destroyed, it destroyed the FolderView and, if
there's a folder dialog present, it destroys the dialog as well.
Turns out, the folder dialog adds the icon's FolderView to itself.
The view becomes part of the dialog's actor tree. When the dialog
is destroyed, it also tries to destroy the view - but the folder
view was already destroyed by FolderIcon!
Fix that by letting the dialog destroy the folder view if it exists,
otherwise destroy the folder view directly.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
Add app icons to the exact page and position they're located
instead of always appending. This will be useful later when
custom icon positions are in place.
For now, it assumes pages are always filled, which is true,
but this will also change with custom icon positions.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
AppDisplay currently adds all icons, and hides the ones inside
a folder. Change that to only add the icons that are not inside
folders. Adding an icon to a folder removes the icon from the
main grid.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
When filtering out the app icons, AppDisplay calls FolderIcon.getAppIds(),
which then calls FolderView.getAllItems(). This last function reads the
already added app icons inside the given folder, and return their app ids.
So far, so good.
When the GSettings backing a folder changes, FolderIcon emits 'apps-changed'
to notify AppDisplay that the folder changed.
Cool.
When AppDisplay receives this signal, it first recreates its own icons, then
updates the folders, and finally hides the icons that are inside folders.
This series of events is unfortunate. Future patches will need the folder
to be updated *before* AppDisplay updates its own icons.
Update folder icons before chaining up to BaseAppView._redisplay().
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
The icon grid is always paginated, so the app grid code doesn't need
to behave differently in the FolderView and AppDisplay.
Move the keyboard handling to IconGrid itself, and remove the now dead
code from AppDisplay.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
The new icon grid layout operates based on rows and columns, and
doesn't try to dynamically adapt it to fit to the container. In
this case, it is better to have a pre-defined set of well-known,
well-tested rows and columns, and switch between them based on
the aspect ratio of the screen.
Introduce a set of modes to the icon grid, and select the mode
that is closest to the aspect ratio.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
IconGridLayout is a new layout manager that aims to replace the
current paginated layout algorithm implemented by the icon grid.
There are a few outstanding aspects of this new layout manager
that are worth highlighting. IconGridLayout implements all the
mechanisms necessary for a paginated icon grid, but doesn't
implement any policies around it. The reason behind this decision
is that this layout manager will be used by other places (e.g.
the login dialog) that demand different policies to how the
grid should look like.
Another important aspect of this grid is that it does not queue
any relayouts when changing its properties. If a relayout is
required, the actor should manually queue it. This is necessary
to avoid layout loops.
Add the IconGridLayout class. Next commits will do the surgery
to IconGrid and any related code to use this new layout manager.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1271
For drag actors which get reparented to the uiGroup, we currently wait
until the next input event to set the fixed position of the actor, until
that they will just be allocated their old fixed position, which is 0,
0.
So avoid drag actors flickering at the top left for one frame and
position them correctly right after reparenting.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1310
Properly adjust for drag actors which were allocated using a custom
vfunc_allocate() and might not have gotten allocated their preferred
size. When DND reparents the actor to the uiGroup, the drag actor will
get allocated its preferred size, so we also need to take the difference
between the old allocation size and the preferred size into account
before reparenting to the uiGroup.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1310
Properly handle drag actors which are not allocated using a fixed
position and disable the fixed position we were using to move the actor
around before we reparent it again to its original parent.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1310
The workspace.js file is quite large and is a bit confusing when it
comes to the term "window" in there, because it can either refer to a
WindowPreview of a complete window or to an individual window like an
attached dialog.
So try to avoid that confusion and split the new WindowPreview class and
its WindowPreviewLayout layout manager out into a new windowPreview.js
file.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1307
MetaWindow is Mutters representation of a window and provides all the
APIs about it, MetaWindowActor is just the ClutterActor that's drawing
that window. So use a MetaWindow to create a WindowPreview instead of
the window actor.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1307
We want to stop using the MetaWindowActor for things which are actually
related to the MetaWindow, one more thing where we can change that is
the overviewHint, which is currently added to the MetaWindowActor.
So move that hint to the MetaWindow and stop calling
get_compositor_private() in a few more places.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1307
We can simply get the MetaWindowActor by calling
MetaWindow.get_compositor_private(), so stop accessing the realWindow
property of WindowPreview. For this we also have to make _isMyWindow()
and _isOverviewWindow() take a MetaWindow as an argument instead of a
MetaWindowActor.
Since the WorkspacesThumbnails are also drop targets for WindowPreviews
and their WindowClones also have the public metaWindow property, switch
to using the metaWindow property there, too.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1307
Since the WindowPreview class rarely needs to handle the actual actor
painting the window preview, refactor the WindowPreviewLayout a bit to
only pass a MetaWindow to its addWindow() and removeWindow() functions.
Also make the getWindows() function return an array of MetaWindows,
which makes the getMetaWindow() function obsolete, so remove that.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1307
We're going to remove ClutterClones, so call the parameters to
addWindow() and removeWindow() "actor" instead of "clone". Also make the
destroyIds less confusing and rename the actual actor destroy id to
"destroyId", and rename the window actors destroy id to
"windowActorDestroyId".
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1307
Since ClutterClones are going to be removed, let's switch the
terminology here to something that's more understandable and rename the
WindowClone class and its layout manager to
WindowPreview/WindowPreviewLayout.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1307
Now that we properly notify mutter about when a size-change animation
has ended, it should never happen that a new size-change animation is
started without the last one being cancelled (ie. 'kill-window-effects'
being emitted).
This means there should also never be an old animationInfo attached to a
window actor, so warn in case we still find one when starting the
animation.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1251
We're currently using the hack of telling mutter that our effect is
completed (even though it isn't) in order to unfreeze updates of the
window actor.
This causes a bug with detecting the wl_outputs a window is
visible on, because the MetaWindowActor emits its "effects-completed"
signal too early, making Mutter update the wl_outputs while we're doing
the animation.
Now since meta_wayland_actor_surface_is_on_logical_monitor() uses the
transformed position and size of the MetaSurfaceActor and is being
called right after we setup the animation (but before it actually
starts, that happens at the next paint cycle) it will use a "very wrong"
rectangle: The transformation has been set to move the actor back to its
old position, and while we did already unfreeze updates and called
clutter_actor_set_position() in meta_window_actor_sync_actor_geometry(),
the actual allocation is not updated yet; this makes
clutter_actor_get_transformed_position() return a position including in
the new transformation, but not including the new allocation, and the
rectangle ends up being moved to the next monitor or completely out of
the stage.
To fix this issue properly, we need to decouple unfreezing actor updates
from emitting the "effects-completed" signal, which is now possible with
the new meta_window_actor_freeze() and meta_window_actor_thaw() APIs. So
use those new methods to freeze and thaw actor updates ourselves and
make sure to call shellwm.completed_size_change() only after the
animation has finished.
Mutter MR: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1250
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/513https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1251
It might be that we receive a "kill-window-effects" signal between the
emission of the "size-change" and the "size-changed" signal.
In this case we already have the animationInfo attached to the window
actor, so we should also remove it.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1251
Using CSS to center the title actor on the border is a bit ugly, because
it requires the CSS to match the calculations used in chromeHeights().
Also it is not possible to use CSS margins for cases where the position
of the actor is determined at run time, such as for the close button.
Instead use an invisible actor that spans between the horizontal and
vertical center lines of the border as guide when aligning the title
actor.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1313
Commit 1ea22a5281 broke the window reposition animation when it
based the ::size-changed signal on the layout manager's bounding box
instead of the MetaWindow::size-changed signal.
That's happening because of the combination of:
1. we adjust to window size changes immediately without animations
2. closing a window triggers a change to a 0x0 bounding box which
is not treated as a size change
Fix this by addressing the 2nd factor, and don't treat a change to
a 0x0 bounding box as size change.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2901
Animating the window clones of the overview requires the fullGeometry
and the actualGeometry to be set, which they won't be when showing the
overview for the first time. So don't even try to animate the window
clones in that case because the geometries will still be null and
accessing them in workspace.js will throw errors.
The workspace views will still get the correct layout as soon as the
allocations happen because syncing the geometries will trigger updating
the window positions. Since animations are disabled for position changes
when syncing the geometry though, we won't get an animation and the
clones will jump into place. That's not a regression though since before
this change we also didn't animate in that case because the geometries
used were simply wrong (the actualGeometry was 0-sized as explained in
the last commit).
If we wanted to fix the initial animation of the overview, we'd have to
always enable animations of the window clones when syncing geometries,
but that would break the animation of the workspace when hovering the
workspaceThumbnail slider, because right now those animations are "glued
together" using the actualGeometry, so they would get out of sync.
The reason there are no errors happening in workspace.js with the
existing code is that due to a bug in Clutter the fullGeometry of
WorkspacesDisplay gets set very early while mapping the WorkspacesViews
(because the overviews ControlsManager gets an allocation during the
resource scale calculation of a ClutterClone, see
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1181), so it
won't be set to null anymore when calling
WorkspacesView.animateToOverview().
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1119
The fullGeometry and the actualGeometry of the WorkspacesDisplay are set
from the allocation of the overviews ControlsManager and the
WorkspacesDisplay, that means they're only valid after those actors got
their allocations during Clutters allocation cycle.
Since WorkspacesDisplay._updateWorkspacesViews() is already called while
showing/mapping the WorkspacesDisplay, that allocation cycle didn't
happen yet and we end up either setting the geometries of the views to
null (in case of the fullGeometry) or to something wrong (a 0-sized
allocation in case of the actualGeometry).
So avoid setting invalid geometries on the views by initializing both
the fullGeometry and the actualGeometry to null, and then only updating
the geometries of the views after they're set to a correct value.
Note that this means we won't correctly animate the overview the first
time we open it since the animation depends on the geometries being set,
but is being started from show(), which means no allocations have
happened yet. In practice this introduces no regression though since
before this change we simply used incorrect geometries (see the 0-sized
allocation mentioned above) on the initial opening and the animation
didn't work either.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1119
Start using the new overlays we introduced in the last commit and remove
the WindowOverlay class and the objects for keeping track of them in the
Workspace.
The new layout which doesn't use the -shell-close-overlap CSS property
anymore sligthly changes the position of the close button to be a bit
further away from the actual window.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1298
So far we allowed the titles of window overlays to expand their width to
be larger than the actual WindowClone, they could expand to the full
size of the Workspace.
Since we're now going to implement those titles as part of the
WindowClone itself, having this feature is no longer possible as easily
as it was before. That's because the clones are stacked according to the
stacking of the actual windows, and since the overlay-elements are
attached to those clones, they will also be shown underneath other
clones.
So stop allowing the titles to expand and limit their size to the width
of the clone, which makes sure titles never get shown above or
underneath other clones.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1298
Add the window overlays we're currently showing using the WindowOverlay
class to the WindowClone class and implement them using
ClutterConstraints instead of the old fixed position/size layout, which
had to be used because the workspaces were scaled, and the title and app
icon were kept unscaled using a separate layer.
Specifically, this is done by adding the ClutterClones to a static
container owned by the WindowClone and adding the elements of the
overlay as children to the WindowClone itself. That way the
overlay-elements can use the container as a source for their constraints
and we avoid having to make sure the overlays remain visible above the
ClutterClones.
We're not using the new overlays yet, they're hidden by default and
showOverlay() isn't called anywhere yet.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1298
Now that we have a new API to get all the windows and metaWindows from
our layout manager, implement the deleteAll() method of the window clone
using that API instead of looping through the children of the actor and
using the source of the ClutterClone.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1298
Now that the folder dialog covers the whole primary
monitor, it eats all input events, and doesn't allow
the event blocker to detect clicks.
Move the click action to the folder dialog itself, and
popdown the dialog if a click is triggered on the dialog
(but not on any children).
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1301
Future commits will improve input handling of the folder
dialog, and they'll require the dialog to cover the whole
primary monitor.
Add another internal, center-aligned container to the
folder dialog, and make it cover the whole available area.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1301
Right now, the app folder dialog isn't really a dialog,
since it is actually added to the AppDisplay. Furthermore,
having it added in AppDisplay may mess up with its sizing
calculations, since AppDisplay has a ClutterBinLayout and
the folder dialog has a fairly large minimum size.
Add the folder dialog to the overview group. Next commits
will adjust various actors to be able to better handle it.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1301
Events have a clear and obvious connection to the calendar, and similar
to the Clocks and Weather sections there's a strong link to a particular
application.
Adding them as another section to the right-hand side of the calendar
therefore presents a viable alternative to the old events section.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1282
The idea behind hiding the notifications and media section on days
other than today was that they represent present activity together
with today's events, in contrast to past and future events from
other days.
After events were moved out of the message list, that behavior is
no longer useful: We just guarantee that the left-hand side of the
calendar will always be empty when browsing the calendar.
Adjust to that by removing the limitation by date.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1282
While treating notifications as a type of present event was a neat
concept, there are some issues with it that we never managed to
address (not least the inability to "open" an event).
So remove the current events section from the message list; we'll
bring back events in a different form later.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1282
This comment is no longer correct, we're not inserting any actors here
to adjust for the window border, but we're modifying the allocation of
the children to adjust for that border.
Since that happens in the layout manager anyway, remove the comment
here.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1297
Now that we handle all ClutterClones belonging to the WindowClone pretty
much the same, we can add a generic _addWindow function to WindowClone
which creates the ClutterClone and adds it to the layout manager.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1297
This isn't quite the same as the allocation, but it's what the workspace
actually wants to use given that we use the bounding box of the
WindowClone for all the layout calculation.
So instead of calculating the windowCenter in the WindowClone, make use
of the bounding-box property of the layout manager and return the center
point of that.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1297
Make use of the new bounding-box property we introduced for the
WindowClones layout manager in the last commit.
With this we can remove all the bounding box calculation code from the
WindowClone class and simply use the "notify::bounding-box" signal to
notify changes to our size. To make sure users of the WindowClone don't
break, we now have to convert the layout managers ClutterActorBox in our
getter function to a JS object.
Since we now also don't have to connect to the "destroy" signal of the
attached dialogs anymore, we can remove _disconnectSignals() and only
listen to "destroy" of the toplevel window.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1297
Move the tracking of the bounding box and all the layout related things
out of the WindowClone class and into the layout manager. This allows
the layout manager to keep track of its windows itself and simply notify
the new bounding-box property in case that box changes.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1297
WorkspacesDisplay is a ClutterActor subclass, and overriding
the show and hide methods require chaining up, otherwise the
actor isn't actually shown or hidden.
To avoid clashing with the pre-existing show method, rename
to animateToOverview.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1295
Unlike the desktop-entry hint, the app name is not optional. That
doesn't mean that we'll be able to match it to a .desktop file,
but we can at least try if we fail to match on PID or desktop-entry.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1291
Since we now have a layout manager for the WindowClone that allows
allocating it a size that isn't the absolute size of the window, we can
now give the WindowClone an artificial size and it will get scaled
accordingly.
So make use of that and stop positioning WindowClones using fixed
position and scale and use a fixed position and fixed size instead. This
will make it easier to use a ClutterLayoutManager to allocate the
WindowClones, because layout managers should only set the allocation of
their children, not the scale.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1294
Since we're going to override the fixed width and height of the
ClutterActor the WindowClone is subclassing, remove those confusing
getter methods for width and height and switch to the public boundingBox
for getting that information.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1294
The getOriginalPosition() API of WindowClone can easily be replaced by
using the existing boundingBox property, which reflects the windows
bounding box in absolute coordinates. This property is also used
everywhere else in the Workspace object, so we can use it here, too.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1294
Change the preferred size functions of the layout manager of window
clones to allow allocating smaller sizes, too. Also scale down the
allocation sizes of the ClutterClones our allocate implementation so
the ClutterClones will scale their texture accordingly.
This will enable us to position the window clones using their allocation
size instead of their scale, which is necessary when introducing a new
ClutterLayoutManager that positions the window clones.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1294
We're going to add a ClutterLayoutManager responsible for allocating the
WindowClones. Since layout managers should only set the allocation of
actors, not the translation or scale, we need to position the
WindowClones using their x, y, width and height properties.
The first step for this is to revert this commit, which switched from
setting fixed positions on WindowClones to using the translation
properties.
This reverts commit 8929c89d1f.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1294
Being able to visualize the actor tree is a handy feature
to have, specially when debugging the hierarchy.
Add a new "Actors" tab to the Looking Glass with the actor
tree inspector. The tree is cleared on unmap to not get
heavy on the number of actors.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1292
As explained in the comment in _init() of WindowClone, we hide the
actual clone from picking so it doesn't interfere with XDND.
This description applies to the clones of the attached dialogs just as
well though, so hide the clones of attached dialogs from picking, too.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1293
We currently only remove the screenshot operation from the shooter
map if the color pick operation completed successfully, but not if
it was cancelled. As a result, we now reject any further requests
from the same sender because we assume that there is an ongoing
operation.
Fix this by moving the cleanup to a finally clause that runs for
both code paths.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1288
Right now _createScreenshot() returns a tuple that indicates failure
when a sender requests a screenshot operation before a previously
started operation finished.
However that doesn't work for the PickColor() method, as it uses a
different return type than the other methods.
Address this by returning an error instead, which works in any case;
arguably trying to start multiple operations in parallel is an error
by the caller more than it is a failed operation anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1288
Now that the only user of the IconGrid is AppDisplay, and
it only uses the paginated icon grid, there's no point in
having the two classes split anymore.
In addition to that, future commits will introduce a layout
manager that will extend current icon grid features, and
merging PaginatedIconGrid and IconGrid in the same class will
vastly simplify this transition.
Merge PaginatedIconGrid into IconGrid, and adapt AppDisplay
to this change.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1267
Now that AllView is the only actor that AppDisplay creates,
we can actually merge them together.
Merge AllView in AppDisplay, remove what used to be AppDisplay,
and rename AllView to AppDisplay.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/880
The Frequent apps grid has a few problems:
* On a fresh install there would be no history of app usage so the
applications shown in the grid have no relevance it takes time
to be useful instead of being useful from the start;
* The grid has far too many items in it to be relevant; 24 apps is
well beyond the average use case as most people don't frequently
use that many, so it gets populated with several apps that are
single use (hello xterm);
* The position of items in the grid are always changing based on an
unknown frequency metric (and not by user-intended input) which
makes it a poor way to quickly launch apps as one would have to
constantly learn the positions of the items in the grid;
* Having two app grids is a bit superfluous and needlessly complicates
the app launching navigation: you have to spend time checking the
frequent grid and if it's not there you have to switch over to another
grid and find the app you need in there it's not straightforward.
Remove the Frequent tab and simplify the related code.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1425https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/880
With color picking implemented in the compositor, we
can do better than letting the user pick a pixel with
the crosshair cursor, and present them with a preview
of the color that will be selected.
Do this by replacing the cursor with a custom icon and
apply a recoloring effect, where we replace a given color
with the color of the currently hovered pixel (similar
to a green screen).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/451
logExtensionError() currently saves the error message by calling
toString() on the passed error. That's convenient as it allows to
pass a string instead of a "proper" error, but the result isn't
great for the common Error case: Its toString() method prefixes
the message with the error name, which usually is just "Error:".
The plain message is more suitable for displaying it to users,
so use that for Error objects.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2337
Replace the usage of IconGrid in the grid search results by
a custom layout manager that only allocates as many children
as the actor can fit.
This new layout manager does not implement changing the icon
size depending on the screen size.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1265
This is a small convenience method for using ClutterActor's iterator API
with javascript's built-in iterator protocol, for example as:
for (let child of container.iterate_children())
doStuff(child);
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1268
For fd.o notifications, we are taking the sender's PID into
account when associating notifications with sources (mainly
to deal with notify-send).
This broke when the implementation under the well-known name
was moved into a separate service, as the implementation in
gnome-shell will now always see the public notification-daemon
as sender.
Restore the old behavior by resolving the sender PID in the
separate service, and pass it as hint to the implementation
in gnome-shell.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2592
Spidermonkey caches imports, which means that uninstalling an
old extension version and installing a new one doesn't work as
expected: If the previous version was loaded, then its code will
be imported instead.
For the last couple of releases this has been a reliable source
of extension bug reports after major GNOME updates. Thankfully
chrome-gnome-shell removed its update support in favor of our
built-in support now, but users may still use older versions
or perform those actions manually, so it still makes sense to
catch this case and set an appropriate error.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1248
The do-not-disturb button and the contained switch are
tied together via a bidirectional property binding.
However it still matters which objects are used as source
and target, as that will determine the initial state: Right
now the (unchecked) button is used as source, which means
that do-not-disturb is turned off on startup.
We want the state to be preserved, so swap source and target
to let the switch (that is bound to the underlying GSetting)
control the initial state.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2804
Sliders can be operated by mouse scroll, but the mouse has to be over
the slider control. Make the brightness and volume system menu entries
forward scroll events to the sliders they contain so that scrolling
anywhere on the menu item operates the slider.
Closes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2795
Whether or not an extension has errors influences the 'canChange'
property, but so far we only update it for errors that occur when
initializing the extension, not when an extension is enabled later.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1249
Soup.SessionAsync by default sets timeout and idle_timeout to 0. This
causes connections to hang around in state CLOSE_WAIT forever after the
remote host has closed the connection.
To fix this, we could set timeout and idle_timeout manually. However,
Soup.SessionAsync is marked as deprecated anyway and should be replaced
by Soup.Session. Doing so also sets a default timeout of 60 seconds.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2774
Removing a stylesheet from the theme will trigger a style update. There's
little point in updating the extension actors that are about to be destroyed
(hopefully), so call the extension's disable() function first.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2757
Sometimes an MPRIS media player will create and then destroy an object
before the signals that handle the object's destruction can be created.
This verifies that the object still exists after the necessary signals
have been created.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2776
Since commit 0ecddafc20 gsd-xsettings startup has been made conditional
on the systemd user instance being available at runtime. While that is
correct, it means that completing xwayland startup is also conditional
now.
We always want xwayland startup to go ahead, so wait for the XSettings
plugin to appear on the bus when gsd-xsettings is launched by gnome-session
and complete the task immediately if startup fails.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1252
Changing the icon to 'system-log-out-symbolic' has no visual
change in a default GNOME setup since both 'system-log-out-symbolic'
and 'application-exit-symbolic' are the same in adwaita-icon-theme
(at the time of writing), however, other icon themes differentiate
between the two icons so pointing to the appropriate icon name
is the right thing to do.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2751
Commit 764527c8c9 not only ports this file
to Promises but also changes the behavior of _initPanelService method.
Instead of always calling _updateReadiness when _panelService is ready,
it only calls it when get_global_engine_async succeeds.
The only callers of _updateReadiness are _initEngines and
_initPanelService. Assume that _initEngines completes first. Its
_updateReadiness call keeps _ready as false and it is expected for
_initPanelService to change it to true. However, since
get_global_engine_async fails because there is no active engine,
_initPanelService never calls _updateReadiness. Therefore, all setEngine
calls do nothing because _ready is false, and the input method panel
never shows. Users are unable to use any input method even if they can
see that ibus-daemon is already running.
Fix the issue by changing it back to the old behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1235
gjs has gotten less forgiving about missing getters/setters, and
commit 6aa1b817 missed the missing getter in the base policy class.
Most notifications use a policy subclass that already provides a
getter, but at least Main.notify() and friends don't; unbreak them
by fixing the base class.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1229
When a modal that's not on top of the modalActorFocusStack gets popped,
we shift the focus stack as described in popModal() to ensure the chain
remains correct. That however destroys the association of a modal actor
and its prevFocus actor on the focus stack, because the prevFocus actors
are now moved to different entries of the stack.
Now when a prevFocus actor gets destroyed, we don't handle that case
correctly and search for the modal actor that was associated with the
prevFocus actor before the stack was shifted, which means we end up
unsetting the wrong prevFocus actor.
So fix that and search the stack for the prevFocus actor which is being
destroyed instead to unset the correct entry.
Thanks to Florian Müllner for figuring out the actual issue and
proposing this fix.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2446
The workspace switcher blocks state updates while the indicator is
animating. Since commit 9c1940ef9d the indicator is considered to
be animating when the workspace adjustment's value doesn't equal the
active workspace.
There is one case though where this breaks badly: When a workspace
is inserted before the active one, the adjustment's upper and value
properties are changed without transitions. But if that change happens
while there's an ongoing transition to the previously active workspace,
the value gets out of sync with the active workspace and we end up
blocking state updates indefinitely.
Fix this by removing any transitions before setting the adjustment
value.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2625
We override the :visible property for the keyboard actor, but don't
provide a corresponding setter. The property is therefore read-only
on the javascript level, and any attempt to set it will fail.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2691
Just as with the last commit, we should not break the assumption made by
Clutter that parents have their allocation set before their children get
allocated, so fix that here, too.
In this case we have to fix it by chaining up to the parent vfunc
override and updating the allocation once more before allocating the
`this._label` child.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/1615
It's important to update the allocation of the parent before allocating
its children, it's an assumption we make in a lot of places.
This broke resource scale calculation for boxpointers and their
children when multiple monitors with different scales are used and the
primary monitor is not positioned at x=0, y=0.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/1615
