The non-interactive requests for 'vpn' settings are forwarded to the UI because
it is able to talk to the auth helpers. However, the VPN requests are identified
by the connection type instead of setting type. That is incorrect and the UI
is not prepared to handle such requests; tries to construct a dialog and fails
miserably:
Gjs-Message: JS LOG: Invalid connection type: vpn
(gnome-shell:13133): Gjs-WARNING **: JS ERROR: Error: No property 'text' in property list (or its value was undefined)
NetworkSecretDialog<._init@resource:///org/gnome/shell/ui/components/networkAgent.js:60
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
_Base.prototype._construct@resource:///org/gnome/gjs/modules/lang.js:110
Class.prototype._construct/newClass@resource:///org/gnome/gjs/modules/lang.js:204
NetworkAgent<._handleRequest@resource:///org/gnome/shell/ui/components/networkAgent.js:724
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
NetworkAgent<._newRequest@resource:///org/gnome/shell/ui/components/networkAgent.js:715
wrapper@resource:///org/gnome/gjs/modules/lang.js:169
https://bugzilla.gnome.org/show_bug.cgi?id=760999
The Next and Sign In buttons are disabled when the username/password
field is empty. However, the user can still bypass this button by
pressing the enter key, leading to some odd glitches with the log in
for 'Not Listed?' users.
This is easy to fix by simply not progressing to the next screen when
the button is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=746180
Generally a user-changed operation will be uninteresting, but if the
user is currently in the user list and the account changes to locked, we
want to remove it from the list, or if the user is not in the list and
the account changed to unlocked, we want to add it to the list. This
fixes the case where a new user account created in gnome-control-center
does not appear in the user list. The password mode is set in the new
account immediately after it is created, but the operations are not
atomic, so the login dialog considers the new user account when it is
still locked and rejects it from being displayed, then immediately
afterwards the account is unlocked. This commit causes the login dialog
to show the account when this occurs.
The containsUser() check here is not strictly necessary, but reduces
spurious calls to addUser() and removeUser(), since there's no easy way
to check if the locked status of the account has changed (as it's much
easier to connect to one signal on the UserManager than to
notify::locked on each User object).
https://bugzilla.gnome.org/show_bug.cgi?id=758568
LoginDialog has a private _user, but UserListItem has a public user.
Easy to get wrong since _user would be the right thing to type in 90% of
this file.
Merge PluginData and PluginObject structs into a single one and create
the scriptable object associated to the plugin instance in NPP_New. Then,
when NPPVpluginScriptableNPObject is requested we just return the
scriptable object associated to the given instance. This caused the
crashes in NPN_InvokeDefault with WebKit, since we had multiple
scriptable objects for the same instance, but only one of those objects
had the onchange listener installed. Firefox seems to cache the
scriptable object for the instance and therefore NPPVpluginScriptableNPObject
is requested only once.
https://bugzilla.gnome.org/show_bug.cgi?id=737932
NPAPI plugins are windowed by default, so we need to set
NPPVpluginWindowBool value to FALSE on startup. This way the browser
will not create a GtkSocket for a GtkPlug that we are not going to
create. It doesn't make sense to claim that we need XEmbed either.
https://bugzilla.gnome.org/show_bug.cgi?id=757940
NPAPI plugins are windowed by default, so we need to set
NPPVpluginWindowBool value to FALSE on startup. This way the browser
will not create a GtkSocket for a GtkPlug that we are not going to
create. It doesn't make sense to claim that we need XEmbed either.
https://bugzilla.gnome.org/show_bug.cgi?id=757940
This ensures that the module will not be unloaded, since GObject types
registered statically can't be reloaded. This should fix crashes with
browsers that correctly unload the plugins.
https://bugzilla.gnome.org/show_bug.cgi?id=737932
If we are trying to render a shadow at a size that is very large in one
direction, but small in the other direction (so that we don't 9-slice
the texture), then allocating the backing texture for the offscreen
buffer may fail due to texture-size limits. Don't crash in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=757150
There are quite a few crashes in retrace.fedoraproject.org that are a result of
of cairo_pattern_get_surface() failing, then a subsequent call to
cairo_image_surface_get_width() crashing because no surface was returned to the
out parameter. Knowing what causes these is hard - my best guess is widgets getting
allocated at ridiculous sizes - but avoiding the crash makes sense in any case.
See https://bugzilla.redhat.com/show_bug.cgi?id=1206754https://bugzilla.gnome.org/show_bug.cgi?id=756983
It's very unexpected that a spinner animation would
preempt idles from running.
This commit runs the spinner animation with a low
priority to ensure it doesn't take over the main
loop.
https://bugzilla.gnome.org/show_bug.cgi?id=754814
Right now the spinner animation updates every 14ms.
60 frames per second would be one frame per 16.667ms,
so we're waking up more frequently than we need to.
This commit changes the wakeup to happen after 16ms.
https://bugzilla.gnome.org/show_bug.cgi?id=754814
The text-scaling-factor GSetting was not being properly propagated
to clutter and the Pango font map; under X this is done by Clutter,
which listens to XSETTINGS directly.
https://bugzilla.gnome.org/show_bug.cgi?id=756447
If the source actor is sized 0x0, the grabHelper will close the menu
on button release if the menu ends up flipped because in that case the
release event happens when the pointer is neither over the source
actor (since it's 0x0) or over the menu actor. A zero sized source
actor works for the non-flipped menu case because the menu's actor
itself ends up underneath the pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=756605
If we get another effect on the same actor, we should make sure to
remove the clone through the "overwrite" methods provided by Tweener, or
there will be a race that might end up with a stray clone being left
around.
https://bugzilla.gnome.org/show_bug.cgi?id=756714
The translation should describe the difference between the fullscreened
and unfullscreened position of the window - however we are currently
assuming a fullscreen position of (0, 0) instead of the monitor's origin,
which causes glitches on dualscreen setups.
https://bugzilla.gnome.org/show_bug.cgi?id=756697
For menus, it makes more sense to pick a width that fits a reasonable amount
of content rather than a fixed amount of screen estate, so use font-relative
sizes instead of pixel values.
https://bugzilla.gnome.org/show_bug.cgi?id=754581
Some labels in the system status menu - namely network names - are out
of our control, and may thus grow the width "infinitively" unless we
restrict the menu width. So far we have been doing this by setting a
fixed width or max-width, but any value we put there might end up
being too restrictive in some locales. Instead, request a width that
fits all the labels we want to show unellipsized and use that instead
of an arbitrary limit.
https://bugzilla.gnome.org/show_bug.cgi?id=708472
There is nothing preventing callers from replacing the internal
layout manager, and as long as the replacement is a (or derives
from) ClutterBoxLayout, everything should work fine except for
losing a bit of automatic property mapping - and the latter is
easily fixable by moving the setup out of the constructor.
https://bugzilla.gnome.org/show_bug.cgi?id=708472
We use the newly introduced feature from Mutter to hook up our own
fullscreen and unfullscreen animations.
To give the illusion of a transition as smooth as possible, we create a
snapshot of the current contents of the actor before its state is
changed, and crossfade between the two states while the size changes.
https://bugzilla.gnome.org/show_bug.cgi?id=707248
StIcon will skip loading the texture when its theme node is unset (which
may happen on style changes while the widget is hidden). While our size
request to compute the dash icon size will create the icon's theme node
if necessary (and of all its parents), a missing texture can still throw
off our computation.
Make sure this doesn't happen by ensuring the icon's style first, so the
texture is updated in response to StWidget::style-changed if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=745649
When adjusting dash icon sizes, we compute the icon padding by subtracting
the configured icon size from the first icon actor's preferred size. To
make sure that the preferred size correctly corresponds to the current
dash icon size even while the icon is animating, we enforce the size
before the size request. For that we used to temporarily manipulate
the icon texture size directly, but commit e92d204d42 cleaned this
up to use the setIconSize() method instead.
This does not work however, as the icon actor's iconSize property will
always match the dash iconSize property, making the method a noop. So
go back to the original approach of enforcing the texture size to make
sure we always base our computations on correct values.
https://bugzilla.gnome.org/show_bug.cgi?id=745649
The JS code could still be holding on to a reference to a window-backed app
after all windows have vanished. (For example, the dash queues an idle to
refetch apps and display them.) Avoid dying with an error message if we
attempt to activate or otherwise manipulate such a window.
https://bugzilla.gnome.org/show_bug.cgi?id=674799
There is nothing particularly critical about this notification, it
was only marked as such to get certain behavior like auto-expanding
and sticking-around to be acknowledged by the user (as it offers
more actions than the summary notification, so it is frustrating
when it goes away because it was missed).
As all notifications will now stay visible until we are sure the
users has seen them, the latter reasoning no longer applies.
Auto-expansion doesn't appear too important and may even be considered
annoying by users, so remove the CRITICAL hint now.
https://bugzilla.gnome.org/show_bug.cgi?id=657923
We are currently erroring out when the tab chain doesn't contain at
least one window for an app which might happen for windows that don't
take focus like xeyes. This leaves us in a state where we can't show
the switcher at all. Let's just ignore these apps instead of looking
broken.
The default pipeline color is opaque white and blending is turned
off. If we only draw with that color (e.g. because animations are
disabled and we're always drawn with opacity == 255), blending is kept
disabled since cogl_pipeline_set_color() returns early if the color
doesn't change from what was there before.
In our case we always want blending to be enabled which we can achieve
by setting the blending string ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=755827
